Foreign Trade Technocel T140 Verizon Wireless Charging Stand User Manual ICXXXX VERIZON VZ3C UserGuide ai

Download:
Mirror Download [FCC.gov]
Document ID	2385125
Application ID	LdXCPKrCkq29fZ7+2YuCjg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.56kB (81999 bits)
Date Submitted	2014-09-11 00:00:00
Date Available	2014-09-24 00:00:00
Creation Date	2014-08-12 15:57:13
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-08-12 15:57:13
Document Title	ICXXXX VERIZON VZ3C UserGuide.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mdigges

VERIZON Qi WIRELESS
CHARGING STAND
Remove protective film from base. Place Charger
on a dry, clean, flat, smooth surface. It will adhere
immediately without any pressure needed. To
remove or reposition, pull up one corner slowly and
gently.
Place your Qi™ compatible device on the Verizon
Qi Wireless Charging Stand to begin charging.
CARE AND MAINTENANCE (General)
Keep Device Dry. Do NOT expose the device to liquids.
If device gets wet, immediately unplug it and allow
it to dry.
Do not disassemble or attempt repair.
Do not store the device in high or low temperatures.
CARE AND MAINTENANCE (Sticky Suction)
To clean the charging stand base, use soft, damp cloth
or scotch tape. Do NOT use solvents, alcohol
or cleaners.
Power-up the Verizon Qi Wireless Charging Stand by
inserting the charging cord into the power port and
plug the power adapter into the wall. Only use the
power adapter that was included with the device.
While in Standby mode, the LED is OFF. Solid red
LED indicates Verizon Qi Wireless Charging Stand
is delivering full power.
LED indicator light
Charging
Standby
Included:
Specifications:
Verizon Qi Wireless Charging Stand
12V Power Adapter
Input: 12V / 750mA
Output: 5V, 1A
ICXXXX
charging cord
If the red LED is on but no power is being received
by the device, there may be a metal object near the
coils. Pick up the device and remove foreign
objects and place device back on the Verizon Qi
Wireless Charging Stand. This is a safety feature
and normal operation.
CAUTIONS
The Verizon Qi Wireless Charging Stand works with Qi
Wireless Charging compatible smartphones and devices.
The charging unit should only be used at normal indoor
room conditions.
Place charger on a hard flat surface.
Use the supplied 12V power adapter included with the
Verizon Qi Wireless Charging Stand.
The Verizon Qi Wireless Charging Stand and your
smartphone/device may become warm during charging.
Avoid direct contact with highly flammable materials.
Avoid contact with delicate furniture finishes.
FCC Information
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC and other RF exposure requirements, please
maintain a distance of 20cm between the charger and your body when
in use.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Changes or modifications made to this equipment not expressly
approved by the manufacturer may void the FCC authorization to
operate this equipment.
FCC ID: SZQ-T140

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mdigges
Create Date                     : 2014:08:12 15:57:13-07:00
Modify Date                     : 2014:08:12 15:57:13-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : ICXXXX VERIZON VZ3C UserGuide.ai
Creator                         : mdigges
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Document ID                     : uuid:d10d9e53-2323-4dc1-aba0-0318fe8f84ee
Instance ID                     : uuid:7a0c03be-4002-4ff5-bff0-1f19c0ae6073
Page Count                      : 1

EXIF Metadata provided by EXIF.tools