Formosa Teletek BTGPS01 Bluetooth GPS Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	561414
Application ID	fwAoz9RdL67iI3qtQtqu2g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.95kB (49414 bits)
Date Submitted	2005-07-13 00:00:00
Date Available	2005-07-13 00:00:00
Creation Date	2005-07-13 11:38:45
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-07-13 11:39:45
Document Title	Microsoft Word - User Manual_BT GPS Receiver_FB-GP01_v0.1_En_1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	linda

Quick User’s Guide
Introduction
The Bluetooth GPS receiver uses Bluetooth wireless transfer technology and the built-in active
antenna to provide a high-sensitivity signal tracking function. This device allows users to transfer data
via satellite to PDA’s, smart phones and notebook PCs equipped with a Bluetooth transfer interface.
The scope of application covers vehicle navigation, security systems, GIS and other related fields.
Package
Check the contents in the package before use.
1. Bluetooth GPS receiver
2. Car charger
3. User’s manual
Overview
Battery Status Indicator
DC In
GPS Status Indicator
Power Switch
Bluetooth Status Indicator
External Antenna In
LED Indication
Indicator
Blue LED
Green LED
Red LED
Status
Bluetooth Connection
GPS Connection
Power
Change
Status
Flashing
Battery low
Always on
Bluetooth connected
Off
Bluetooth not connected
Flashing
Always on
GPS active
GPS inactive
Charging started; determining
battery condition
Charge in progress
Charge inactive
Flashing
Always on
Off
Using an external antenna
This device is equipped with a built-in antenna and does not need additional an antennal for running
the GPS. You will need an external antenna to help you search and receive signals only when the
device is blocked from receiving satellite signals.
Getting started
Step 1: Charging your battery
1. You must charge the battery before using the device for the first time. Please charge the battery
with the car charger that comes with the device. After connecting the charger to the device, the red
LED indicator on the device will flash because while it determines the type of battery installed on
the device. After determining the battery, the charging process will start, and the red LED indicator
will be illuminated at all times until the battery is fully charged.
2. When the battery is fully charged, the red LED indicator will go out.
Caution!
1. The blue LED will flash at all times if the battery is low.
2. Do not charge non-chargeable batteries, as this will damage the product.
Step 2: Bluetooth connection
1. Switch on your Bluetooth GPS receiver. The battery indicator (red LED) will go out.
2. Enable the Bluetooth device on your PDA or notebook PC according to the instructions. Then
connect it to the Bluetooth GPS receiver.
3. The Bluetooth indicator (blue LED) is always ON if it is successfully connected to your PDA or
notebook PC. You can confirm the connection with the Bluetooth software on your PDA or
notebook PC. The Bluetooth indicator (blue LED) will go out if there is not connection.
Caution!
Some Bluetooth devices require an authorization code. This code is “0000”.
Step 3: GPS
1. The GPS indicator (green) will keep flashing during positioning and after positioning is completed.
Confirm positioning from your navigation software before use.
2. The GPS indicator will be illuminated at all times when the GPS is inactive.
FCC Statement
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
User Information
This device complies with part 15 of FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
To comply with FCC RF exposure requirement, this device and its antenna must be
co-located or operating in the conjunction with any other antenna or transmitter.
The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc.. Other trademarks and trade names are those of their respective
owners.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5287eb96-7dd7-4946-8e6b-baea2317a488
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:07:13 11:39:45+08:00
Create Date                     : 2005:07:13 11:38:45+08:00
Metadata Date                   : 2005:07:13 11:39:45+08:00
Document ID                     : uuid:76b081d0-4bf0-492a-83c1-fe0371b4aaa2
Format                          : application/pdf
Title                           : Microsoft Word - User Manual_BT GPS Receiver_FB-GP01_v0.1_En_1.doc
Creator                         : linda
Author                          : linda

EXIF Metadata provided by EXIF.tools