Fortinet 120502 802.11 ac Module User Manual WUG2650 MNL

Download:
Mirror Download [FCC.gov]
Document ID	2217421
Application ID	b2+D3fCBZ/jdUeWoNBne+g==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.4kB (229996 bits)
Date Submitted	2014-03-17 00:00:00
Date Available	2014-03-17 00:00:00
Creation Date	2014-03-14 16:09:23
Producing Software	Microsoft® Word 2010
Document Lastmod	2014-03-17 12:57:48
Document Title	WUG2650 MNL
Document Creator	Microsoft® Word 2010
Document Author:	Annie

802.11 a/n/ac Module
PCE4502AN
User’s Manual
PRODUCT DESCRIPTION
The PCE4502AN is adapting the next generation Wi-Fi technology, 802.11ac. It provides
the great improvement in performance compare with 802.11n by utilizing 2Tx / 2Rx
technology to achieve 867Mbps throughput on the 5GHz bands.
PRODUCT SPECIFICATION
Hardware Specification
Standard
RF
Interface
Operating Voltage
Antenna Connectors
IEEE802.11a; IEEE802.11n; IEEE802.11ac
QCA9882
64-bit PCI-E
3.3v
I-PEX x2
Radio specification
867Mbps
Data rate
Channel
802.11a
802.11a/n_HT20
802.11n_HT40
802.11ac_HT80
Typical Rx Sensitivity
(dBm combined)
Data rate
≦-92 dBm
≦-74 dBm
≦-91 dBm
≦-72 dBm
≦-90 dBm
≦-70 dBm
≦-87 dBm
≦-62 dBm
6Mbps
54 Mbps
MCS 0/8
MCS 7/15
MCS 0/8
MCS 7/15
MCS 0
MCS 9
* All RF parameters tolerance are +2/-1 dBm
Antenna Specification
Antenna
Type
(Internal Antennas)
2 x Antennas
Internal PIFA
Antenna
Peak Gain (dBi)
5150~5250MHz
5250~5350MHz
5470~5725MHz
5725~5850MHz
Ant0
Ant1
5.74
5.50
5.91
5.40
6.13
4.74
3.78
4.29
Environment
Operation temperature
0-40 deg C
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the
antenna while this end product is installed and operated. The end user has to be informed that the IC
radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be
informed that any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. IC statement is required to be available in the users manual: This Class B
digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device is intended only for OEM integrators under the following conditions:
1)
The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2)
The transmitter module may not be co-located with any other transmitter or antenna,
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator
is still responsible for testing their end-product for any additional compliance requirements required with this
module installed.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid
and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
may be maintained between the antenna and users. The final end product must be labeled in a visible area with the
following: “Contains FCC ID: TVE-120502”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove
this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:03:14 16:09:23+08:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2014:03:17 12:57:48+08:00
Metadata Date                   : 2014:03:17 12:57:48+08:00
Format                          : application/pdf
Creator                         : Annie
Title                           : WUG2650 MNL
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:e08bdb8b-2ce1-4294-a5b8-63fd4c7bc7c2
Instance ID                     : uuid:206646df-8673-44ed-b9d6-1ee1dd38c969
Page Count                      : 4
Language                        : zh-TW
Author                          : Annie

EXIF Metadata provided by EXIF.tools