Fortinet 120512 802.11 ac 2x2 Module User Manual PCE4302AN FNT

Download:
Mirror Download [FCC.gov]
Document ID	2689784
Application ID	eLedkDYkY/i4zUanz8sFnw==
Document Description	Users Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.96kB (174539 bits)
Date Submitted	2015-07-23 00:00:00
Date Available	2015-07-23 00:00:00
Creation Date	2015-07-16 02:55:10
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2015-07-17 09:46:47
Document Title	PCE4302AN (FNT) user manual
Document Creator	Word
Document Author:	Terri

  
  
  
User’s	
  Manual	
  
  
Model	
  :	
  PCE4302AN	
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
1. Introduction
2.4 / 5 GHz
802.11a/b/g/n/ac
PCE4302AN
867Mbps
  
The	
  PCE4302AN	
  is	
  adapting	
  the	
  next	
  
generation	
  2-­‐Stream	
  Wi-­‐Fi	
  technology,	
  
802.11ac.	
  It	
  provides	
  the	
  great	
  
improvement	
  in	
  the	
  performance	
  
compared	
  with	
  802.11n	
  and	
  achieves	
  
wireless	
  performance	
  of	
  up	
  to	
  867Mbps.	
  
  
PCE4302AN	
  is	
  a	
  dualband	
  PCIe	
  module	
  to	
  
support	
  both	
  2.4Ghz	
  and	
  5Ghz	
  bands.	
  
  
  
  
2. Feature
Ø
Ø
PCE4302AN
802.11a/b/g/n/ac	
  dual	
  band	
  operation	
  in	
  the	
  2.4GHz	
  and	
  5GHz	
  frequency	
  
bands.	
  
Support	
  WPA,	
  TKIP,	
  AES	
  and	
  WAPI	
  hardware-­‐based	
  IEEE	
  802.11i	
  encryption	
  
engine	
   	
  
  
3. Hardware Installation
PCE4302AN
3-1. Installation Overview	
   	
  
PCE4302AN	
  wireless	
  module	
  is	
  design	
  for	
  access	
  point,	
  Router,	
  IP	
  Cam	
  series	
  and	
  
network	
  products.	
   	
  
  
3.2 Safety Recommendations	
  
The	
  safety	
  guidelines	
  are	
  as	
  follows:	
  
l Keep	
  the	
  board	
  area	
  clear	
  and	
  dust-­‐free	
  before,	
  during,	
  and	
  after	
  installation.	
   	
  
l Keep	
  tools	
  away	
  from	
  walk	
  area	
  where	
  you	
  and	
  others	
  could	
  fall	
  over	
  them.	
  
l Do	
  not	
  wear	
  lose	
  clothing	
  or	
  jewelry,	
  such	
  as	
  earrings,	
  bracelets	
  hat	
  could	
  get	
  
caught	
  in	
  the	
  board	
  
l Wear	
  safety	
  glasses	
  if	
  you	
  are	
  working	
  under	
  any	
  conditions	
  that	
  might	
  be	
  
hazardous	
  to	
  your	
  eyes.	
  
l Do	
  not	
  perform	
  any	
  action	
  that	
  creates	
  a	
  potential	
  hazard	
  to	
  people	
  or	
  makes	
  the	
  
equipment	
  unsafe.	
   	
  
l Never	
  attempt	
  to	
  lift	
  an	
  object	
  that	
  is	
  too	
  heavy	
  for	
  one	
  person	
  to	
  handle.	
  
   	
  
3.3 Maintaining Safety with Electricity	
   	
  
Warning:	
  Before	
  working	
  o	
  a	
  board	
  or	
  working	
  near	
  power	
  supplies,	
  unplug	
  the	
  
power	
  cord	
  on	
  AC	
  units;	
  on	
  DC	
  unit,	
  disconnect	
  the	
  power	
  at	
  the	
  circuit	
  breaker.	
   	
  
Follow	
  these	
  guidelines	
  when	
  working	
  on	
  equipment	
  powered	
  by	
  electricity:	
   	
  
-­‐ Do	
  not	
  work	
  alone	
  if	
  potentially	
  hazardous	
  conditions	
  exist	
  anywhere	
  in	
  your	
  
work	
  space.	
  
-­‐ Never	
  assume	
  that	
  power	
  is	
  disconnected	
  from	
  a	
  circuit;	
  always	
  check	
  the	
  circuit.	
  
-­‐ Extension	
  cables,	
  frayed	
  power	
  cords,	
  and	
  missing	
  safety	
  grounds.	
  If	
  an	
  electrical	
  
accident	
  occurs,	
  proceed	
  as	
  follows:	
  
-­‐ Use	
  caution;	
  do	
  not	
  become	
  a	
  victim	
  yourself	
   	
  
-­‐ Disconnect	
  power	
  from	
  the	
  system	
  
-­‐ If	
  possible,	
  send	
  another	
  person	
  to	
  get	
  medical	
  aid.	
  Otherwise,	
  acssess	
  the	
  
condition	
  of	
  the	
  victim	
  and	
  then	
  call	
  for	
  help.	
   	
  
-­‐ Determin	
  if	
  the	
  person	
  needs	
  rescue	
  breating	
  or	
  external	
  cardiac	
  comparessions;	
  
then	
  take	
  appropriate	
  action.	
  
  
3.4 Installing
-­‐ Remove	
  the	
  module	
  from	
  its	
  protective	
  packaging	
  
-­‐ Avoiding	
  Electrostatic	
  Discharge	
  
-­‐ Before	
  your	
  install	
  the	
  module,	
  ground	
  yourself	
  by	
  touching	
  a	
  piece	
  of	
  metal	
  to	
  
avoid	
  electrostatic	
  discharge	
  (EDS).	
  
You	
  share	
  able	
  take	
  the	
  following	
  precautions	
  to	
  prevent	
  damage	
  to	
  the	
  module:	
  
-­‐ Keep	
  module	
  in	
  its	
  antistatic-­‐shielded	
  bag	
  until	
  you	
  are	
  ready	
  to	
  install	
  it.	
   	
  
-­‐ Handle	
  the	
  module	
  by	
  its	
  edges.	
   	
  
-­‐ Ensure	
  the	
  connector	
  is	
  connected	
  to	
  above	
  Model’s	
  board	
  tightly.	
   	
  
  
  
  
  
  
  
  
  
  
  
  
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 22cm between the radiator & your
body.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 22 cm is maintained
between the antenna and users, and
2) The transmitter module may not be co-located with any other
transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not
be required. However, the OEM integrator is still responsible for testing
their end-product for any additional compliance requirements required
with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met
(for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid
and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate
FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the
antenna may be installed such that 22 cm may be maintained between
the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID: TVE-120512”. The
grantee's FCC ID can be used only when all FCC compliance
requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the
end user regarding how to install or remove this RF module in the user’s
manual of the end product which integrates this module.
The end user manual shall include all required regulatory
information/warning as show in this manual.
Industry Canada statement:
This device complies with RSS-247 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable
aux appareils radio exempts de licence. Son fonctionnement est sujet aux
deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 22cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 22 cm de distance entre la source de
rayonnement et votre corps.
This device is intended only for OEM integrators under the following
conditions: (For module device use)
1) The antenna must be installed such that 22 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this
module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les
conditions suivantes: (Pour utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 22 cm est
respectée entre l'antenne et les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou
antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires
sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est
toujours responsable des essais sur son produit final pour toutes exigences de
conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the Canada
authorization is no longer considered valid and the IC ID cannot be used on
the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour
certaines configurations d'ordinateur portable ou de certaines co-localisation
avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme
valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces
circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y
compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 22 cm may be maintained between the antenna and
users. The final end product must be labeled in a visible area with the following:
“Contains IC: 7280B-120512”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un
dispositif où l'antenne peut être installée de telle sorte qu'une distance de
22cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final
doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient
des IC: 7280B-120512".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the
end product which integrates this module.
The end user manual shall include all required regulatory information/warning
as show in this manual.
Manuel	
  d'information	
  à	
  l'utilisateur	
  final	
  
L'intégrateur	
   OEM	
   doit	
   être	
   conscient	
   de	
   ne	
   pas	
   fournir	
   des	
   informations	
   à	
  
l'utilisateur	
  final	
  quant	
  à	
  la	
  façon	
  d'installer	
  ou	
  de	
  supprimer	
  ce	
  module	
  RF	
  dans	
  le	
  
manuel	
  de	
  l'utilisateur	
  du	
  produit	
  final	
  qui	
  intègre	
  ce	
  module.	
  
Le	
   manuel	
   de	
   l'utilisateur	
   final	
   doit	
   inclure	
   toutes	
   les	
   informations	
   réglementaires	
  
requises	
  et	
  avertissements	
  comme	
  indiqué	
   dans	
  ce	
  manuel.	
  
Caution	
  :	
  
(i)	
  the	
  device	
  for	
  operation	
  in	
  the	
  band	
  5150-­‐5250	
  MHz	
  is	
  only	
  for	
  indoor	
  use	
  to	
  
reduce	
  the	
  potential	
  for	
  harmful	
  interference	
  to	
  co-­‐channel	
  mobile	
  satellite	
  systems;	
  
(ii)	
  the	
  maximum	
  antenna	
  gain	
  permitted	
  for	
  devices	
  in	
  the	
  band	
  5725-­‐5850	
  MHz	
  
shall	
  be	
  such	
  that	
  the	
  equipment	
  still	
  complies	
  with	
  the	
  e.i.r.p.	
  limits	
  specified	
  for	
  
point-­‐to-­‐point	
  and	
  non-­‐point-­‐to-­‐point	
  operation	
  as	
  appropriate;	
  and	
   	
  
(iii)	
  Users	
  should	
  also	
  be	
  advised	
  that	
  high-­‐power	
  radars	
  are	
  allocated	
  as	
  primary	
  
users	
  (i.e.	
  priority	
  users)	
  of	
  the	
  bands	
  5650-­‐5850	
  MHz	
  and	
  that	
  these	
  radars	
  could	
  
cause	
  interference	
  and/or	
  damage	
  to	
  LE-­‐LAN	
  devices.	
  
Avertissement:	
  
(i)	
  les	
  dispositifs	
  fonctionnant	
  dans	
  la	
  bande	
  5150-­‐5250	
  MHz	
  sont	
  réservés	
  
uniquement	
  pour	
  une	
  utilisation	
  à	
  l’intérieur	
  afin	
  de	
  réduire	
  les	
  risques	
  de	
  brouillage	
  
préjudiciable	
  aux	
  systèmes	
  de	
  satellites	
  mobiles	
  utilisant	
  les	
  mêmes	
  canaux;	
  
(ii)	
  le	
  gain	
  maximal	
  d'antenne	
  permis	
  (pour	
  les	
  dispositifs	
  utilisant	
  la	
  bande	
  de	
  5725	
  à	
  5	
  
850	
  MHz)	
  doit	
  être	
  conforme	
  à	
  la	
  limite	
  de	
  la	
  p.i.r.e.	
  spécifiée	
  pour	
  l'exploitation	
  point	
  à	
  
point	
  et	
  l’exploitation	
  non	
  point	
  à	
  point,	
  selon	
  le	
  cas;	
   	
  
(iii)	
  De	
  plus,	
  les	
  utilisateurs	
  devraient	
  aussi	
  être	
  avisés	
  que	
  les	
  utilisateurs	
  de	
  radars	
  
de	
  haute	
  puissance	
  sont	
  désignés	
  utilisateurs	
  principaux	
  (c.-­‐à-­‐d.,	
  qu’ils	
  ont	
  la	
  priorité)	
  
pour	
  les	
  bandes	
  5650-­‐5850	
  MHz	
  et	
  que	
  ces	
  radars	
  pourraient	
  causer	
  du	
  brouillage	
  
et/ou	
  des	
  dommages	
  aux	
  dispositifs	
  LAN-­‐EL.	
  
  
  
  
  
  

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:07:16 02:55:10Z
Creator Tool                    : Word
Modify Date                     : 2015:07:17 09:46:47+08:00
Metadata Date                   : 2015:07:17 09:46:47+08:00
Keywords                        : 
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Format                          : application/pdf
Description                     : 
Title                           : PCE4302AN (FNT) user manual
Creator                         : Terri
Subject                         : 
Document ID                     : uuid:878f1af3-5a79-47a3-92f1-49acd66cb618
Instance ID                     : uuid:c2b5e8e0-b0b0-4ef9-a3e9-1c5a78d7423c
Page Count                      : 9
Author                          : Terri
Apple Keywords                  : 

EXIF Metadata provided by EXIF.tools