Fortinet 130523 3T3R PCIeModule selectable 5GHz + 2.4G User Manual

Fortinet Inc. 3T3R PCIeModule selectable 5GHz + 2.4G Users Manual

Users Manual

User Manual WMIQ-287ACN Version: 1.0 Date:2015/05/21
5GHz+2.4G 802.11b/g/n/ac/n/a 1.3Gbps(5G)+450Mbps(2.4G) WMIQ-287ACN is a 5Ghz +2.4G dual Band selectable 3T3R PCIe mini Card Module based on the Qualcomm QCA9880 solution which features improved transmission power and sensitivity by Gemtek. Using the QCA9880 external FEM, it is the ideal cost effective solution for platform integration. With enhanced technologies such as advanced power management and receiver boost, it makes the WMIQ-287ACN the ideal 5Ghz+2.4G 3T3R module. General Information FEM Hitachi LSHW-44DHB-AB1 Interface PCI Express 1.1 Operating Voltage DC 3.3V Antenna Connectors 3 x I-PEX connectors PCB Dimensions 30mmX 50.8mm Temperature Range 0 to 45 °C (Operating), -20 to 80 °C (Storage) Security WEP,TKIP,AES and WAPI hardware encryption Data rates 802.11b:1, 2, 5.5, 11Mbps 802.11g:6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n:  20MHz channel:  1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.)  2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.)  3Nss: 195Mbps @ 800GI, 216.7Mbps @ 400GI (Max.)  40MHz channel:  1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.)  2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.)  3Nss: 405Mbps @ 800GI, 450Mbps @ 400GI (Max.) 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n:
 20MHz channel:  1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.)  2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.)  3Nss: 195Mbps @ 800GI, 216.7Mbps @ 400GI (Max.)  40MHz channel:  1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.)  2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.)  3Nss: 405Mbps @ 800GI, 450Mbps @ 400GI (Max.) 802.11ac:  20MHz channel:  1Nss: 78Mbps @ 800GI, 86.7Mbps @ 400GI (Max.)  2Nss: 156Mbps @ 800GI, 173.3Mbps @ 400GI (Max.)  3Nss: 260Mbps @ 800GI, 288.9Mbps @ 400GI (Max.)  40MHz channel:  1Nss: 180Mbps @ 800GI, 200Mbps @ 400GI (Max.)  2Nss: 360Mbps @ 800GI, 400Mbps @ 400GI (Max.)  3Nss: 540Mbps @ 800GI, 600Mbps @ 400GI (Max.)  80MHz channel:  1Nss: 390Mbps @ 800GI, 433.3Mbps @ 400GI (Max.)  2Nss: 780Mbps @ 800GI, 866.7Mbps @ 400GI (Max.)  3Nss: 1.17Gbps @ 800GI, 1.3Gbps @ 400GI (Max.) T x channel width support 20MHz / 40MHz /80MHz Standard/Compliance IEEE 802.11b/g/n/ac
RF Spec Frequency Range 2.4G,5G Radio Stream 3T3R Transmit Power (Per Radio Stream) Tolerance ( +/- 2dBm) 802.11b 1Mbps 19 dBm 802.11g 6Mbps:18 dBm 802.11n HT-20 MCS0 :18 dBm 802.11n HT-40 MCS0 :12 dBm 802.11a 6Mbps: 19 dBm 802.11n HT20 MCS0: 18dBm 802.11n HT40 MCS0: 18dBm 802.11ac VHT20 MCS0: 18dBm 802.11ac VHT40 MCS0: 18dBm 802.11ac VHT80 MCS0: 12dBm Receive Sensitivity Tolerance ( +/- 2dBm) CCK 1Mbps :-90 dbm OFDM 6Mbps -94dbm OFDM 54M -80dbm HT20 MCS0 : -94dbm HT20 MCS7 :-78dbm HT40 MCS0 : -90dbm HT40 MCS7 : -76dbm 802.11a: 6Mbps: -94dbm 54M: -80dbm 802.11n HT20/HT40 @5G: HT20 MCS0: -94dbm HT20 MCS7: -76dbm HT40 MCS0: -90dbm HT40 MCS7: -76dbm 802.11ac VHT20/VHT40/VHT80: VHT20 MCS0: -94dbm VHT20 MCS8: -74dbm VHT40 MCS0: -90dbm VHT40 MCS9: -70dbm VHT80 MCS0: -88dbm VHT80 MCS9: -66dbm
Dimension: 51mm * 30mm (full size)
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA. Operation of this device is restricted to indoor use only. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: ”. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. TVE-130523
Industry Canada statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne peut causer d'interférences; et(2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: ”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. 7280B-1305237280B-130523
This radio transmitter (IC: ) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device Cet émetteur radio (IC: ) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous avec le gain maximal admissible indiqué. Types d'antennes ne figurent pas dans cette liste, ayant un gain supérieur au gain maximum indiqué pour ce type, sont strictement interdits pour une utilisation avec cet appareil Antenna model Type Connector 2.4G Gain 5G Gain AK51010200 Dipole R-SMA 4.59 dBi 5.67 dBi LG19 PIFA IPEX 6.38 dBi 4.34 dBi FPC_ANT (Cable: 95mm) PIFA IPEX 4.16 dBi 3.32 dBi FPC_ANT (Cable: 355mm) PIFA IPEX 2.87 dBi 0.91 dBi FPC_ANT (Cable: 150mm) PIFA IPEX 3.57 dBi 3.11 dBi 7280B-1305237280B-130523

Navigation menu