Fortinet 140701 Secured Wireless Access Point User Manual FortiAP 221E 223E QuickStart Guide

Download:
Mirror Download [FCC.gov]
Document ID	3478580
Application ID	PE3uKmQSmCVQzONbYRfN/w==
Document Description	Users Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	163.63kB (2045365 bits)
Date Submitted	2017-07-24 00:00:00
Date Available	2017-07-26 00:00:00
Creation Date	2017-07-10 16:03:44
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2017-07-20 10:20:38
Document Title	FortiAP 221E, 223E QuickStart Guide
Document Author:	Fortinet Technical Documentation

FortiAP 221E, 223E
QuickStart Guide
7/10/2017
Copyright© 2017 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®,
FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet,
Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be
registered and/or common law trademarks of Fortinet. All other product or company names
may be trademarks of their respective owners. Performance and other metrics contained
herein were attained in internal lab tests under ideal conditions, and actual performance and
other results may vary. Network variables, different network environments and other
conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied,
except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General
Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the
specific performance metrics expressly identified in such binding written contract shall be
binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in
the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make
any commitment related to future deliverables, features, or development, and circumstances
may change such that any forward-looking statements herein are not accurate. Fortinet
disclaims in full any covenants, representations,and guarantees pursuant hereto, whether
express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise
revise this publication without notice, and the most current version of the publication shall be
applicable.
Environmental specifications
Ambient operating temperature: 0C to 40C
Refer to specific Product Model Data Sheet for Environmental
Specifications (Operating Temperature, Storage Temperature,
Humidity, and Altitude).
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales
(Température de fonctionnement, température de stockage, humidité et l'altitude).
Safety
Caution: This equipment is to be used in a Network Environment 0 per IECTR
62101. This product is connected only to PoE networks without routing to the
outside plant.
Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par
IECTR 62101. Ce produit est uniquement connecté aux réseaux PoE sans
installation externe de routage.
QuickStart Guide
Cautions and Warnings
Box Includes
or
FortiAP device
QuickStart
Guide
Wall Mounting Hardware
Antennae
2.4 GHz
5 GHz
X2 2.4 GHz
X2 5 GHz
(Model 223E)
(Externa
antenna
models)
Before You Begin
Write down details typically provided by your network administrator or ISP.
Static IP address
IP address
___________________
Subnet Mask
___________________
Default Gateway
___________________
Primary/Secondary DNS
___________________
DHCP
It is normal to not require a hostname, but your ISP might require it.
Hostname
___________________
QuickStart Guide Video
https://video.fortinet.com/video/177/
fortigate-and-fortiap
Internal221E
antenna
models
FortiAP
- Device
FrontDevice Front :
FortiAP 221E
LED1: WLAN 2 (5GHz)
LED5: Power
Off: Wireless Link
administratively disabled/off
Green: 5GHz Wireless Radio
enabled
Blinking: Transmitting and
receiving data
Off: No Power
Green: Power on and
ready for operation
Blinking: Device booting
LED4: Status
LED2: WLAN 1 (2.4GHz)
Off: Wireless Link administratively disabled/off
Green: 2.4GHz Wireless Radio enabled
Blinking: Transmitting and receiving data
Off: FortiGate Wireless controller
has not been found
Amber: FortiGate Wireless controller has
been found but this AP is not managed
Amber Blinking: Error/Fault in connecting
to FortiGate Wireless controller
Green: This AP is being managed by
FortiGate Wireless controller
LED3: Ethernet port
Off: Ethernet Link administratively disabled/off
Amber: 100Mbps is active
Amber Blinking: Traffic is transmitting at 100Mbps
Green: 1000Mbps is active
Green Blinking: Traffic is transmitting at 1000Mbps
FortiAP
- Device
FrontDevice Front:
External223E
antenna
models
FortiAP 223E
LED1: WLAN 2 (5GHz)
Off: Wireless Link
administratively disabled/off
Green: 5GHz Wireless Radio
enabled
Blinking: Transmitting and
receiving data
LED5: Power
Off: No Power
Green: Power on and
ready for operation
Blinking: Device booting
LED4: Status
LED2: WLAN 1 (2.4GHz)
Off: Wireless Link administratively disabled/off
Green: 2.4GHz Wireless Radio enabled
Blinking: Transmitting and receiving data
LED3: Ethernet port
Off: Ethernet Link administratively disabled/off
Amber: 100Mbps is active
Amber Blinking: Traffic is transmitting at 100Mbps
Green: 1000Mbps is active
Green Blinking: Traffic is transmitting at 1000Mbps
Off: FortiGate Wireless controller
has not been found
Amber: FortiGate Wireless controller has
been found but this AP is not managed
Amber Blinking: Error/Fault in connecting
to FortiGate Wireless controller
Green: This AP is being managed by
FortiGate Wireless controller
Internal
antenna
models
FortiAP 221E
- Device
RearDevice Rear:
LAN/PoE
Power connection
for optional power
adapter.
12V DC,
center positive.
External
antenna
models
FortiAP
223E
- Device
Rear Device Rear:
5.0 GHz
Antenna
2.4 GHz
Antenna
LAN/PoE
Power connection
for optional power
adapter.
12V DC,
center positive.
5.0 GHz
Antenna
2.4 GHz
Antenna
ΠInstallation
unlock
lock
or
The unit can be mounted on a wall or ceiling using
the mounting hardware provided.
The electrical wall box must be pre-installed.
10
 Basic Connection
Network Core/FortiGate
WAN/POE
Connect the FortiAP device to a FortiGate controller or an Internet connection.
Ensure that the Power over Ethernet (PoE) cable is connected to an applicable
port on your FortiGate device or PoE injector.
Caution: Adequate grounding must be provided to the FortiAP unit and
the PoE injector, in compliance with your local electrical code or
regulations.
Warning: This device complies with IEEE 802.3af PoE specification. Do
not use any PoE injectors that are not IEEE 802.3af compliant as they
may damage your device.
11
Ž FortiAP Setup
Deployment through a FortiGate
Ensure that you are running the Fortinet recommended version of
software. Please check support.fortinet.com for more information.
If FortiGate is on the same network as the FortiAP:
1. Use FortiGate to preauthorize the FortiAP device.
2. Refer to the “Access Point Deployment” section of the FortiWiFi and
FortiAP Configuration Guide found at http://forti.net/ap-docs.
3. Plug the FortiAP into your local Ethernet connection. The FortiAP will selfconfigure.
Or
1. Instead of preauthorizing, you can use the FortiGate to authorize the
FortiAP device after you have connected the FortiAP to the network.
2. Within two minutes of connecting the FortiAP to the FortiGate, the device
appears on the Managed FortiAP page in the Web-based Manager:
authorize and assign a profile to the device.
12
If FortiGate is not on the same network as the FortiAP:
1. Log into FortiAP directly (IP address: 192.168.1.2) with username admin
and no password, and specify the IP address of the controlling FortiGate.
2. Connect to FortiAP via the CLI using the instructions in the “Connecting
to FortiAP CLI” section of the FortiWiFi and FortiAP Configuration guide.
3. Specify the IP address of the controlling FortiGate:
cfg -a AC_IPADDR_1=0.0.0.0
cfg -c
where 0.0.0.0 is the address of the FortiGate.
4. The FortiAP device connects to FortiGate, and then you can authorize the
FortiAP.
13
Cautions and Warnings
Environmental specifications
Ambient operating temperature: 0C to 40C
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature,
Storage Temperature, Humidity, and Altitude)
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température
de fonctionnement, température de stockage, humidité et l'altitude).
Safety
Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries
in a fire. They may explode. Dispose of used batteries according to your local regulations.
IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.
Batterie – Risque d'explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les
batteries au feu. Ils peuvent exploser. Jetez les piles usagées conformément aux réglementations
locales. IMPORTANT: Suisse: l'annexe 4.10 de SR814.013 s’appliquent aux batteries.
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is
connected only to PoE networks without routing to the outside plant.
Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce produit
est uniquement connecté aux réseaux PoE sans installation externe de routage.
This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked LPS or Class 2
and rated 12 Vdc, 2A or by 54 Vdc from PoE source.
14
Le produit doit être alimenté par un bloc d'alimentation à courant continu homologué UL de 12 Vdc, 2A
nominal marqué LPS ou Class 2 ou par une source d’alimentation par Ethernet de 48 Vdc (PoE).
Regulatory Notices
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
15
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Caution: Operation of this device is restricted to indoor use only.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Industry Canada Equipment Standard for Digital Equipment (ICES) –
Canada
This Class
digital apparatus
complies
with
ICES-003.
This
device
with ISED
license-exempt
RSS standard(s).
Class BBcomplies
digital
apparatus
complies
withCanadian
Canadian
ICES-003. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must
Cet appareil
appareil
numérique
lalaclasse
BBest
à laàmay
norme
NMB-003
du Canada.
accept
any interference,
including
that
cause
undesired
operation
Cet
numériquede
de
classeinterference
estconforme
conforme
la norme
NMB-003
du
Canada.of the
device.
Innovation, Science and Economic Development (ISED) – Canada
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de
This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
two conditions:
(1) this device
not cause
andaccepter
(2) this device
must accept any
produire
de brouillage,
et (2)may
l'utilisateur
deinterference,
l'appareil doit
tout brouillage
interference, including
interference
that may cause
undesired d'en
operation
of the device.
radioélectrique
subi, même
si le brouillage
est susceptible
compromettre
le
fonctionnement.
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de
For
product
available est
in the
USA/Canada
market,
onlysuivantes
channel 1~11
can be operated.
Selection
licence.
L'exploitation
autorisée
aux deux
conditions
: (1) l'appareil
ne doit pas
produire
of
channels
not possible.
deother
brouillage,
et (2) is
l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent
être
exploités.
Sélection
d'autres
canauxmarket,
n'est pas
For product
available
in the
USA/Canada
onlypossible.
channel m
1~11 can be operated. Selection of
other channels is not possible.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
environment.
This equipment should be installed and operated with minimum distance 23cm
exploités.the
Sélection
d'autres
between
radiator
& yourcanaux
body. n'est pas possible.
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
23cm de distance entre la source de rayonnement et votre corps.
16
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential
This
equipment
complies with
ISED radiation
exposure
limits
set forth for an uncontrolled environment.
for harmful
interference
to co-channel
mobile
satellite
systems.
This equipment should be installed and operated with minimum distance 23cm between the radiator &
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that
the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-topoint operation as appropriate.
your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un
environnement
nonbe
contrôlé.
Cet
équipement
doitradars
être installé
et utiliséas
avec
un minimum
de 23cm
de
Users should also
advised
that
high-power
are allocated
primary
users (i.e.
priority
distance
la source
de rayonnement
votrethese
corps.
users) of entre
the bands
5650-5850
MHz andetthat
radars could cause interference and/or
damage to LE-LAN devices.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the
Attention: still
Le dispositif
lathe
bande
5150-5250
MHz est
à un usage
intérieur afin de
equipment
complies de
with
e.i.r.p.
limits specified
forréservé
point-to-point
and non-point-to-point
réduire l'interférence nuisible potentielle aux systèmes mobiles par satellite co-canal.
operation as appropriate.
Le gain
gain maximal
maximald’antenne
d’antennepermis
permis
(pour
dispositifs
utilisant
la bande
5725-5850
Le
(pour
lesles
dispositifs
utilisant
la bande
5725-5850
MHz)MHz)
doit se
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à
point, selon le cas.
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le
cas.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute
Caution:
device
for the
band 5150-5250
MHz(c.-à-d.,
is only for
indoor
to reduce
potential
for
puissanceThe
sont
désignés
utilisateurs
principaux
qu’ils
ontusage
la priorité)
pour
les bandes
5650-5850
MHz et que
ces radarsmobile
pourraient
causer
du brouillage
et/ou
desare
dommages
harmful
interference
to co-channel
satellite
systems.
High-power
radars
allocated aux
as
dispositifs
LAN-EL.
primary
users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.
This device has been designed to operate with an antenna having a maximum gain of 4.58 dBi
for 2.4GHz and 5.6 dBi for 5GHz. Antenna having a higher gain is strictly prohibited per
Attention: Le dispositif de la bande 5150-5250 MHz est réservé à un usage intérieur afin de réduire
regulations of ISED. The required antenna impedance is 50 ohms.
l'interférence nuisible potentielle aux systèmes mobiles par satellite co-canal. Les radars à haute
Under ISEDsont
regulations,
radio
transmitter
may only
operate
an antenna
of a type
puissance
désignés this
comme
utilisateurs
principaux
(à savoir
lesusing
utilisateurs
prioritaires)
des and
maximum
(or lesser)
gain
approved for
the
by pourraient
ISED. To reduce
radio et /
bandes
5250-5350
MHz
et 5650-5850
MHz
et transmitter
que ces radars
causerpotential
des interférences
interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
ou endommager les périphériques LE-LAN
This device has been designed to operate with an antenna having a maximum gain of 4.58 dBi for
2.4GHz
and 5.6
dBiconçu
for 5GHz.
havingavec
a higher
is strictly
prohibited
per regulations
of dBi
Ce dispositif
a été
pourAntenna
fonctionner
unegain
antenne
ayant
un gain maximal
de 4.58
ISED.
TheGHz
required
impedance
is 50
ohms. ayant un gain supérieur sont strictement
pour 2,4
et 5.6antenna
dBi pour
5GHz. Une
antenne
interdites par la réglementation d'ISED. L'impédance d'antenne requise est de 50 ohms.
Under ISED regulations, this radio transmitter may only operate using an antenna of a type and
this device.
maximum
(or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference
Le présent émetteur radio (IC: 7280B-140701) a été approuvé par ISED pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance
requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le 17
gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
to
other users, theàantenna
type and itsd'ISED,
gain should
be so chosen
thefonctionner
equivalent isotopically
Conformément
la réglementation
cet émetteur
radiothat
peut
seulement avec
radiated
powerd’un
(e.i.r.p.)
more
than
that necessary
for successful
communication.
une antenne
typeisetnot
d'un
gain
maximal
(ou inférieur)
approuvé
pour l'émetteur par ISED.
Dans le but de réduire les risques de brouillage radioélectrique aux autres utilisateurs, il faut
Ce
dispositif
a été
conçu pour
fonctionner
ayant un
gain maximal
de 4.58
dBi pour (p.
choisir
le type
d'antenne
et son
gain deavec
sorteune
queantenne
la puissance
isotrope
rayonnée
équivalente
i.r.e.)
neetdépasse
pas l'intensité
à l'établissement
d'une
réussie.
2,4
GHz
5.6 dBi pour
5GHz. Unenécessaire
antenne ayant
un gain supérieur
sontcommunication
strictement interdites
par la
réglementation d'ISED. L'impédance d'antenne requise est de 50 ohms.
This radio transmitter (IC: 7280B-140701) has been approved by ISED to operate with the
antenna typesàlisted
below with d'ISED,
the maximum
permissible
gainfonctionner
and required
antennaavec une
Conformément
la réglementation
cet émetteur
radio peut
seulement
impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with
de
réduire
les risques de brouillage radioélectrique aux autres utilisateurs, il faut choisir le type
this
device.
antenne d’un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par ISED. Dans le but
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
Le présent
émetteur
radio
(IC: 7280B-140701)
été approuvé réussie.
par ISED pour fonctionner avec
pas
l'intensité
nécessaire
à l'établissement
d'une acommunication
les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance
requise
chaque(IC:
type
d'antenne. Les
non
inclus
dans cette
ou dont le
This
radiopour
transmitter
7280B-140701)
hastypes
been d'antenne
approved by
ISED
to operate
withliste,
the antenna
gain est
supérieur
au gain
maximal permissible
indiqué, sont
strictement
interdits
pour
l'exploitation
de l'
types
listed
below with
the maximum
gain
and required
antenna
impedance
for each
émetteur.
antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain
for it's
thatantennas(s)
type, are strictly
for use with
device.in conjunction with any
Thisindicated
device and
mustprohibited
not be co-located
or this
operating
other antenna or transmitter except in accordance with IC multi-transmitter product
Le
présent émetteur radio (IC: 7280B-140701) a été approuvé par ISED pour fonctionner avec les types
procedures.
d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour
Cet appareil
et son antenne
(s) ned'antenne
doit pas non
êtreinclus
co-localisés
ou fonctionnement
en est
association
chaque
type d'antenne.
Les types
dans cette
liste, ou dont le gain
supérieur
avec une autre antenne ou transmetteur.
au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une
autre antenne ou transmetteur.
18
Brand
Holder
Gain (dBi)
Quantity
Antenna Type
Connector
2.4GHz
5GHz
Internal antenna model
Senao
Networks, Inc
Printed
IPEX
4.5
4.4
Senao
Networks, Inc
Printed
IPEX
4.5
Senao
Networks, Inc
Printed
IPEX
5.6
Senao
Networks, Inc
Printed
IPEX
5.6
Brand
Holder
Gain (dBi)
Quantity
Antenna Type
Connector
2.4GHz
5GHz
External antenna model
Senao
Networks,
Inc
Dipole
RP SMA Plug
4.58
Senao
Networks,
Inc
Dipole
RP SMA Plug
5.35
19
European Conformity (CE) - EU
This is a Class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
The product transmits within the frequency ranges and less than or equal to the power listed below:
2412-2472MHz less than 20dBm
5180-5240MHz less than 23dBm
5260-5320MHz less than 23dBm *
5500-5700MHz less than 30dBm *
Note: * Only with DFS bands certification.
20
Fortinet Customer Service & Support
Create a support account, register and manage your products,
download updates, firmware images and release notes, and create
technical support tickets.
https://support.fortinet.com
Fortinet Document Library
Up-to-date versions of Fortinet publications for the entire family of
Fortinet products.
http://docs.fortinet.com
Training Services
Course descriptions, availability, schedules, and location of training
programs in your area.
http://www.fortinet.com/training
Technical Discussion Forums
Communicate with other customers and Fortinet partners about
Fortinet products, services, and configuration issues.
https://support.fortinet.com/forum
FortiGuard Threat Research and Response
Up-to-date information on vulnerabilities and threats, includes a
virus scanner, IP signature look-up, and web filtering tools.
http://www.fortiguard.com
Fortinet.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : Fortinet Technical Documentation
Description                     : 
Title                           : FortiAP 221E, 223E QuickStart Guide
Create Date                     : 2017:07:10 16:03:44-04:00
Metadata Date                   : 2017:07:20 10:20:38+08:00
Modify Date                     : 2017:07:20 10:20:38+08:00
Keywords                        : 
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document ID                     : uuid:d765f5b4-a7eb-4763-9ad8-2f1105095396
Instance ID                     : uuid:ab2e6bb2-8cfc-44a6-8ad0-70f1b6d41e2c
Has XFA                         : No
Page Count                      : 21
Language                        : en-us
Subject                         : 
Author                          : Fortinet Technical Documentation

EXIF Metadata provided by EXIF.tools