Forus Electronics FSV-510 Digital Voice Recorder User Manual FSV 510

Forus Electronics Co., Ltd. Digital Voice Recorder FSV 510

Users Manual

MADE IN KOREAVersion 2006.6
Main Features󳀏High-quality DesignComfortable Grip & Dynamic Design󳀏Long Recording Time In LP mode, 66 hours and 20 minutes(128MB), 133 hours and 20 minutes(256MB).󳀏USB Digital Interface Download and Upload files Easily thru PC connection.󳀏Telephone Message Recording You can record the important telephone conversation and messages.󳀏Automatic Power OffPower automatically turns off when the recorder is not in use for more than threeminutes.󳀏Recording Quality Mode Recording quality can be selected using four modes, XQ/HQ/SP/LP.󳀏VOR Recording The Recorder activates when sound is present, so that it may save memory space foreliminating blank space in recording.󳀏Microphone Sensitivity Microphone sensitivity can be adjusted according to the distance from the soundsource and the ambient noise level.󳀏Repeated Playback Any desired recorded file can be played repeatedly.󳀏Section Repeat Playback󳀏Quick Message Search Desired recorded message can be easily searched by scan function while playingback.󳀏Beep Sound Beep sound can be set to sound at every press of the button.󳀏Vibration Mode on RecordingSecret Recording with Vibration on Recording On & Off.󳀏Additional Recording (Appendix) You can add the recording to the same file number without affectingthe original.󳀏Time Indicator for Remained Recording󳀏All in One Menu Button󳀏Recorded Message Monitoring Recording can be monitored through earphone during recording.󳀏File Search (Intro Scan) Intro scan function consecutively plays the first 7 seconds of each filefor easy search of the recorded messages. 󳀏Playback Speed It’s possible to set playback speed in 7 steps,50/70/100(normal)/130/150/170/200%.󳀏Hearing Aids You can listen to the voice coming from the microphone onearphones and adjust the sound levels without using the recordingfunction.󳀏Firmware Upgrade Function01 Voice RecorderVoice Recorder 02
Voice Recorder 04PreparingFeatures 1Name of Each Part 5Package Contents 7Putting the Batteries 7External Power Supply Setting 8Power ON/OFF 8HOLD Setting 9Volume Adjustmen 9Contents03 Voice RecorderUsingRecording 10Playback 11Playback Speed Adjustment 12Section Repeat Playback 13Intro Scan 13Deleting Recorded File 14Recovery of erased file 16Format 17User-Friendly FunctionsMenu Structure 21Menu Setting 23Connecting to an External DeviceRecording through an External Microphone 26Connecting to an Audio System 27Listening through an Earphone 28Recording a Telephone Message 29Connecting to a PC 30Firmware Upgrade 39OthersPrecautions 41Troubleshooting 43Specifications 45Warranty
Preparing Preparing05 Voice RecorderVoice Recorder 06Name of Each ParFront View Left View Right ViewBack ViewTop ViewLCD DisplayRecordingIndicatorFolder IndicatorMic.SensitivityIndicatorFile No.IndicatorBattery Level IndicatorHold SwitchVOR RecordingIndicatorRecording QualityIndicatorHold StatusIndicatorPlay / PauseButtonRemainedMemory IndicatorREW / FF ButtonRec./Stop ButtonBuilt-in SpeakerMenu ButtonLCD DisplayRecording/Playback TimeIndicatorRepeat PlaybackIndicatorMicrophone/Input Terminal Earphone / Output TerminalStrap HoleBuilt-in MicRecording/Playback Level Indicatorand Remained Memory IndicatorSection RepeatIndicatorHand Strap RingVolumeButtonErase Button andSection RepeatButtonBattery CoverUSB PortTerminal
Preparing Preparing07 Voice RecorderVoice Recorder 08Package Contents External Power Supply SettingPower ON/OFFPutting the batteriesRecorder DVR-ManagerInstall CDEarphone Hand StrapUser’s ManualBattery(AAAX2)External DeviceConnectionCableTelephoneRecording AdaptorExternalMicrophoneTelephoneConnection CordDC Adapter(Option)USB Connection Cable1.Push the Battery cover downside. 2. Insert two batteries with the correctpolarity as indicated by the ＋　and －symbols and close the cover.Recorded files will not be erasedduring replacing the batteries.FullHigh-NormalWeakExhaustedChecking the batteries LevelYou can use external power supply by connecting DC adaptor(Optional)●Using External Power thru PC connection could cause some noisy on telephonerecording and it could prevent VOR function from working properly. In this case, using DC adaptor(optional) is recommended.󰬒Select “DC”at the menu of USB Mode in General.󰬓Connect the Recorder to PC by USB cable.●Recorder operates with PC power supply.▶Power ON ▶Power OFF Slide the HOLD switch in the 󳃩direction, andpress the REC/STOP button to turn the power on. ●Automatic Power OFF - The power automatically turns off when the recorder isnot in use for more than 3 minutes at STOP mode. ●Manual Power OFF - Slide HOLD switch in the 󳃪direction at STOP mode.Using Direct USB port from the PC is highly recommendedrather than using USB hub due to weak voltage.In case of malfunction, pleaseremove the batteries out of therecorder and put the batteries intothe recorder again.
Preparing Using09 Voice RecorderVoice Recorder 10HOLD Setting Recording●HOLD switch performs locking function during playback or recording and manualpower off function at STOP mode. ●Press the Play/Pause button while recording to display the recording remaining time and if youpress once more, the current recording time is displayed.●Press MENU button while recording in order to change the previous setting of VOR function. HOLD function locks all the button functions to prevent unwanted use and the dischargeof the batteries. In recording, please position the built-in microphone toward the sound source. Volume AdjustmentVolume can be adjusted from level 0 to 20 at STOP mode or during Playback. ▶To Set HOLDSlide HOLD switch in the 󳃪direction during recording orplayback.●The symbol flickers at one second intervals, and HOLD is set. ▶To Release HOLDSlide HOLD switch in the 󳃩direction during recording orplayback.●Flickering of the symbol disappears and HOLD is cancelled.▶To Turn Up the Volume Press ‘＋’symbol of the VOL button. ●As the number on the LCD display increases, the volume increases. ▶To Turn Down the Volume Press ‘－’ symbol of the VOL button. ●As the number on the LCD display decreases, the volume decreases. ▶Press REC/STOP button. ●Recording begins with the red light on the recordingindicator. The display shows the current folder, filenumber, recording elapsed time and the recording soundlevel. The recorder automatically selects the file numbernext to the previously recorded file in current folder.▶To Record into the Next File Number during recordingPress ▶▶button while recording.●The recorder stops at the current file number and continuesrecording into the next file number. ▶To Stop RecordingPress REC/STOP button once again.●The red light goes off and recording stops. ▶To Add RecordingPress and hold REC/STOP button for more than 3seconds at STOP mode. ●The recorder attaches the message to the current file number. ●Please check the recording sound level works while recording. ●When the recording sound level does not work on recording with loud voice, stop recording and play backthe recorded file to check whether recording works well. Then continue to use if there is no problem.
Using Using11 Voice RecorderVoice Recorder 12Playback▶To Start Playback▶To Stop Playback󰬒Press Menu(M) Button and Select the folder whichcontains the file to play.●For folder selection, pls. refer to page 23󰬓In stop mode, press the FF/REW(◀◀/ ▶▶) button toselect the file number to play back. ●For careful search, press the button briefly. For quick search,press and hold the button for a few seconds.󰬔Press Play/Pause(▶■) button.●The Recorder starts playback with the file number, playbackelapsed time and playback sound level. Press Play/Pause(▶■) button. ●Playback stops. Now, press Play/Pause(▶■) button again to resume playback from theprevious stop position.▶To playback other recorded file during playback of current filePress FF(▶▶) button shortly during playback.●The playback of current file stop and playback of next file starts Press REW (◀◀)button shortly during playback.●The playback of previous file starts.Playback Speed Adjustment▶To start play back󰬒Press Play/Pause(▶■) button.●Play back starts.󰬓Press Menu(M) button seven times.●Default speed is set as ‘100’(Normal).󰬔◀◀/ ▶▶ button with direction of right or left.●Playback speed can be adjusted in 7 levels as follows (50,70, 100(normal), 130, 150, 170, 200%).▶To search the desired section within a file during playbackPress and hold ▶▶button during playback.●The file is fast forwarded and playback resumes when you release the button.Press and hold ◀◀ button during playback●The file is rewind and playback resumes when you release the button.●At stop mode, you can adjust play back speed also.
Using Using13 Voice RecorderVoice Recorder 14Section Repeat PlaybackIntro ScanPress and hold Play/Pause(▶■) button for more than3 seconds at STOP mode. ●This function enables fast file search by playing back thefirst 7 seconds of each file. ●For playback the file during scanning, press JOG button in. ●Press REC/STOP button in while playback to display the playback remaining time and if youpress once more, the current playback time is displayed.●Pressing Menu(M) button twice while playback shows the status of repeat playback, you canchange the status with ◀◀/ ▶▶ buttons.●Pressing Menu(M) button four times shows ‘SR:100’ on display. If you don°Øt want to changeplayback speed, simply press other buttons except for ◀◀/ ▶▶ buttons.Deleting the Recorded File󰬒Press Menu(M) button and Select the folder thatcontains the file to be deleted.●For folder selection, pls. refer to page 23.󰬓In stop mode, press ◀◀/ ▶▶button with direction ofright or left to select the recorded file to delete.●For careful search, press the button briefly.For quick search, press and hold the button for a few seconds.󰬔Press ERASE button briefly.●The selected file number flickers and the selected fileis played back. 󰬕Press ERASE button again briefly.●The selected file is deleted and file numbers are automaticallyrearranged.󰬒Press A > B button at the starting point of thedesired section●‘A’ appears and ‘B’ flickers.󰬓Press A > B button again at the ending point of the desiredsection. ●‘B’ appears and the section from 'A' to 'B' is repeated. ●Press A > B button once again to cancel Section Repeat Playbackand then, normal playback continues.●The ERASE operation is cancelled if any other button is pressed during theselected file number is flickering or the ERASE button is not pressed again in 5seconds.▶To delete a recorded file
Using15 Voice RecorderUsingVoice Recorder 16▶To delete all the files in the selected folder󰬒Press Menu(M) button and Select a folder to bedeleted.●For folder selection, pls. refer to page 23.󰬓Press ERASE button more than 5 seconds.●The selected folder flickers and 1-FOLDER and ERASE isdisplayed.󰬔Press ERASE button for more than 5 seconds again.●All the selected folder is deleted.●The ERASE operation is cancelled if any other button is pressed during theselected file number is flickering or the ERASE button is not pressed again in 5seconds. ●In case of recording after deleting a recorded file, Recovery is not available.Recovery of Erased File󰬒Press MENU(M) button over five seconds at STOP mode.●FRCV:No appears on the display.This function enables to recovers the erased file by mistake of user.󰬓Press ◀◀/ ▶▶button and Select ‘FRCV: YS󰬔Press ‘Play/Pause(▶■)’button and erased filesare recovered.●In case of erasing by using Reset mode(Low Format), the recovery function is not available.
Using18 Voice RecorderUsing17 Voice RecorderQuick Format Setting󰬒Press MENU button over five seconds at STOP mode.●FRCV:No appears on the display.This function is used to erase the recorded files quickly.󰬓Press Menu(M) button again shortly.●FA-For appears on the display.󰬔Press ‘Play/Pause(▶■)’button and ‘No’appearson the display.󰬕Press ◀◀/ ▶▶button and Select ‘YES’.󰬖Press ‘Play/Pause(▶■)’button and all files areerased.●In case of erasing by using Reset mode(Low Format), the recovery function is notavailable.●Please make sure that file recovery is not available in case of using this function.Low Format SettingIn case of erasing the recorded file by using this function, the recorded file is erasedcompletely and it’s not possible to recover.󰬒Press MENU button over five seconds at STOP mode.●FRCV:No appears on the display.󰬓Press Menu(M) button again shortly.●FA-For appears on the display.󰬔Press Menu(M) button again shortly.●RESET appears on the display.
Using19 Voice Recorder󰬖Press ◀◀/ ▶▶button and Select ‘YES’.󰬗Press ‘Play/Pause(▶■)’button and all files areerased. Also memory format is proceeded.▶Menu function chart▶Setting Menu▶Connecting to anExternal Device▶OthersUsing User-Friendly Functions󰬕Press ‘Play/Pause(▶■)’button and ‘No’appears onthe display.●In case of erasing the recorded file by using this function, the recorded file is erasedcompletely and it’s not possible to recover.●Low formatting restores the recorder to the default mode.
Set Up Menu21 Voice RecorderSet Up Menu22 Voice RecorderMenu StructureFolder SelectionRecordingQuality SettingMic. SensitiveSettingRepeat PlaybackSettingSIGNAL MODESettingUSB ModeSettingListen & RepeatSettingLP SP HQ XQVOR Recording VOR ON VOR OFPLAYBACK SPEED SettingCHECK VERSION INFORMATIONLCD BACKLIGHT SettingUM USB UM DCMIC HI MIC LO MIC USSM BEEP SM SILL REP ON L REP OFFSM VIBREP ONE REP FOLDERREP ALL REP NONE
23 Voice Recorder24 Voice RecorderSet Up Menu Set Up MenuSet Up MenuSet Up Menu MenuItems Set UpMenu(M)button󰬒At stop mode, press Menu(M) button to move into each menu mode.󰬓Press ◀◀/ ▶▶button and Select each function on the mode.Folder can be selected for playback or recording.Press ◀◀/ ▶▶button and select folders from A to D.FolderSelection1You can set up recording quality.Press ◀◀/ ▶▶button and select recording quality among LP,SP,HQ,XQ.LP: Longtime Recording modeSP: Standard Recording modeHQ: High-quality Recording modeXQ: Ultra high-quality Recording mode*RecordingQualitySetting2VOR (Voice Operated Recording) With VOR mode, the recorder activates only when sound is present andpauses when no sound is detected.You can control Mic. Sensitivity according to sound level and noiseneighborhood. Press ◀◀/ ▶▶button and select sensitivity among Hi,Lo,US.󳀏High : Select in case the sound source is distant or the ambient noise levelis low.VORRecordingMic.SensitivitySetting34MenuItems Set UpMenu(M)button󳀏Lo : Select in case the sound source is close or the ambient noise level ishigh.󳀏User : Select this to manually set the microphone°Øs sensitively.* Microphone sensitivity can be adjusted in 15 steps and it can be made each2 stepRepeat Playback SettingPress ◀◀/ ▶▶button and select repeat mode among REP ONE, REPFOLDER REP ALL, REP NONE.REP ONE: To repeat One fileREP Folder: To repeat One folderREP All: To repeat all filesREP None: No RepeatRepeatPlaybackSetting54You can control playback speed with fast or slow speed.Press ◀◀/ ▶▶button and select Playback Speed as follows.SR50, SR70, SR100(NORMAL), SR130, SR150, SR175, SR200PlaybackSpeed Setup7Beep, Silent, Vibration modes are available.Press ◀◀/ ▶▶button and select among SM Beep, SM SIL, SM VIB.SM Beep : Beep soundsSM SIL : No soundSM VIB : The recorder vibrates only when recording starts and stops.(Vibration works only at following three operations)Power On: The recorder vibrates for about 2 seconds.REC START: The recorder vibrates twice shortly.REC STOP: The recorder vibrates once shortly.Signal ModeSetup6
26 Voice Recorder25 Voice RecorderSet Up Menu Connecting to an External DeviceRecording through an External Microphone▶Connect external microphone to VoiceRecorder.●Plug the external microphone into theMicrophone/Input terminal of the Recorder.Press REC/STOP button.●Voice is recorded through the external microphone. Press REC/STOP button again. ●Recording stops.To start RecordingTo finish Recording●Please check the recording sound level works while recording.MenuItems Set UpMenu(M)buttonBy connecting Recorder to PC thru USB cable, USB connection or DC PowerSupply can be selectable according to user’s choice.Press ◀◀/ ▶▶button and select USB or DC in orders.UM USB: USB connectionUM DC: DC Power SupplyUSB ModeSetup8You can hear and follow-up because the concerned time has no sound aftersection repeat playback is setup.If you connect earphone to the recorder, you can hear your own voice whenyou speak at this mode.Press ◀◀/ ▶▶button and select L REP ON, L REP OFF in orders.L REP ON: For this functionL REP OFF: No for this functionBacklight time can be setup.Press ◀◀/ ▶▶button and select Off, 10sec, 20sec, 30sec, 60sec, all inorders.Listen andRepeatSetup9LCDBacklighttime setup10You can check full memory capacity, version information.CheckVersionInformation11
Connecting to an External Device28 Voice RecorderConnecting to an External Device27 Voice Recorder●Adjust the recording sound volume with the volume control of the audio system. ●Recording quality may be affected by the performance of the external device. Connecting to an Audio System▶To Record contents of the Audio into theVoice Recorder, Connect the Voice Recorder to the audiosystem.●Connect the Microphone/Input terminal tothe Earphone terminal of the audio systemusing the supplied external deviceconnection cable.Press REC/STOP button and the play button of the audio systemsimultaneously. ●The Voice Recorder starts recording the audio contents. To Finish Recording Press REC/STOP button and the stop button of the audio systemsimultaneously.●Recording stops.To start RecordingTo finish Recording●Please check the recording sound level works while recording.●The recording sound volume can be adjusted using VOL button of the Voice Recorder.●Recording quality may be affected by the performance of the external device. Connecting to an Audio System (continued )Listening through an Earphone▶To Record Contents of the Recorder into an AudioSystem. Connect the Voice Recorder to the audio system. ●Connect the Earphone/Output terminal to the microphoneterminal of the audio system using the supplied externaldevice connection cable.To start recordingTo finish recording󰬒Select the file to be recorded.󰬓Press ▶■button of the Voice Recorder and the record button of the audiosystem simultaneously. ●The selected file in the Voice Recorder is recorded into the audio system. Press ▶■button of the Voice Recorder and the stop button of the audiosystem.●Recording stops.▶Plug the earphone to the Earphone/Output terminal. ●The playback sound is automatically routed to the earphone. The playback volume can be adjusted by ＋and －of VOLbutton.
30 Voice Recorder29 Voice RecorderConnecting to an External DeviceConnecting to an External Device●The digital telephone cannot be connected to the Voice recorder. ●To record only when you talk on the telephone, please select VOR recording and thenpress REC/STOP button. (For details, pls. refer to page )●If the VOR function does not work properly, set the MIC sensitivity low.(For details, pls. refer to page )●The input volume of the recorded sound is affected by the telephone and phone linecondition. If input volume is too low, disable the VOR function.(For details, pls. refer to page .) Recording a Telephone Message▶Connect the Voice Recorder tothe telephone.●Using the external device connection cable,connect the Microphone/Input terminal of theVoice Recorder and the telephone recordingadapter as shown in the picture.Telephone messages can be recorded on the Voice Recorder.Connecting to a PCDVR-Manager should be installed to PC prior to connecting Voice Recorder to PC.When you insert DVR-Manager CD into CD-ROM drive, the language selection window appears.SystemRequirementsComputer: IBM-compatible, Intel Pentium (or better) based with USBport support󳀏Memory: More than 64MB of RAM 󳀏OS: Windows 98/Me/2000/XP󳀏Hard Disk: More than 50MB space󳀏For Playing: Sound card and speaker 󳀏For Recording: Sound card and microphoneInstallation of DVR-ManagerDVR-Manager software provides various functions such as file uploading to PC,playback, recording, editing of recorded files and sending recorded files via email. 1Select language2Click●Caution: Installation should be proceeded without connecting the recorder to PCvia USB cable.Press REC/STOP button during the telephone conversation.●The Voice Recorder starts recording the conversation.Press REC/STOP button again.●Recording stops.To Start RecordingTo Finish Recording
32 Voice Recorder31 Voice Recorder3Click4Click6Click7Click5Type in your name and company name.8Click9Click●Installation has been completed and the shortcut icon appears on the desktop.Connecting to an External DeviceConnecting to an External Device
Connecting to an External Device34 Voice RecorderConnecting to an External Device33 Voice RecorderFirst connect Recorder to PC for the better use of the Recorder ManagerPro Software.Connecting to PC󰬒Take the batteries out of the Voice Recorder.󰬓Connect the Voice Recorder to computer by the provided USB cable and then press "REC/STOP"Button. 󰬔Check " the picture shown the connection of Voice Recorder to computer" on the LCD of VoiceRecorder.●If you can't find out the picture, you are required to select "USB" from "DC" at "USB Mode" Refer to User GuideManual. 󰬕When you connect the voice recorder to computer first time after purchasing, you can find out "FoundNew Hardware".Click the Pop-up Window and then check "Forus USB Controller-DVR008".●After connecting the Recorder to PC, try not to touch the Recorder since itmay cause the malfunction of the device.●If you have connected USB cable while batteries are installed, you mustfirst press REC/STOP button to power on Recorder.DVR Manager Installation Guide Win XP UserYou should install DVR-Manager Program provided by maker for uploading ordownloading a file(s) from computer to the Voice Recorder .Please watch out below procedure before the installation of DVR-Manager Program. 󰬒Insert DVR-Manager CD to CD-Rom󰬓Complete installation procedure as computer indicates. 󰬔There will be "DVRM-008" icon on the screen if completed installation.●Please refer tp enclosed User Manual Guide for more deail.USB port connection terminalPCUSB connection cableDiameter 3.5 Microphone in put terminal of the sound cardUSB port connection terminalInstallation of DVR-ManagerConnection of the Voice Recorder to computer(Installation of Driver)
Connecting to an External Device36 Voice RecorderConnecting to an External Device35 Voice RecorderTrouble Shooting in Manager program for Win XPIf you won't continuously find out "Forus USB Controller-DVR008" on The Found NewHardware Wizard when the Voice Recorde connects to PC, please check if you installed"Driver" or not in the connection of the Voice Recorder to the PC at the first time.●Yes. I installed Driver without checking if "USB Driver" or "Forus USB Controller-DVR008"in "The Found New Hardware Wizard"󰬒Remove abnormal driver installed●Place the mouse to "Start" on the Win XP.●Control Panel->System->System Properties->Hardware->Device Manager ●If "USB Device" on it, disconnect the Voicereocrder from USB Cable and then try toconnect again. Check "Forus USBController-DVR008"●If you see "USB Device" Constantly, Look atthe "Tip for Voice Recorder" inEnglish/Readme/CD.󰬖If "Forus USB Controller-DVR-008" is detected, click "Next". 󰬗On the Notice about "MS Logo Test" as below, maker recommends to keep the rest procedures ofinstalltion because this is no harmful to your PC thru its strict compliance testing with this OS byitself.
Connecting to an External Device38 Voice RecorderConnecting to an External Device37 Voice RecorderConnecting to a PCInstruction for using DVR-Manager is provided in detail in Help.If installation is finished, shortcut icon is displayed.Using online HelpIn case of managing files in PC, you can use conveniently because multi-language forfile name or error message is supported.Multi-languages Support󰬒Double click the shortcut icon.●DVR-Manager is executed.󰬓Select Help of main menu●Help appears.DVR-Manager Deleting●Select menus in the sequence of : Start > Settings > Control panel > Add/RemoveProgram > DVR-Manager DVR-xxx Ver.1.0 > Add/Remove●If the Driver is installed abnormally, you can find out the above window with "the yellow question mark andUSB Device".●Remove the Driver by clicking the right mouse and "Unintall".󰬓Uninstall DVR-Manager ●Uninstall the installed DVR-Manager Program in the PC.●Restart the PC.●Install DVR-Manager Program again. Restart PC.󰬔Installation DVR-Manager Program and Driver of the Voice Recorder again.󰬕Refer to previous pages about Installation of DVR-Manager and Driver.●Despite the above procedures, the PC does not detect the Voice Recorder inDVR-Manager Program, follow up the above procedures to remove DVR-Manager &abnormal Driver excepting the Installtion Drvier at. Get the "USB Driver_XP.exe" from the provided CD or website(Maker or distributor) andinstall this driver by double-click and then connect the Voice Recorder to PC and follow upthe procedures to install the Driver .
Connecting to an External Device40 Voice RecorderConnecting to an External Device39 Voice RecorderPlease adopt temporary measures as follows when upgrading firmware did not becompleted normally because of the batteries’separation or shock to the unit.󰬒Remove the batteries from the unit please.󰬓Push down Hold key and set up Hold-On mode.󰬔Press and hold ‘REC’button and connect the unit to PC viaUSB cable.󰬕Please repeat the above procedures of upgrading firmware fromNo.2 to No.5.▶Trouble shooting in case of error while upgrading firmwareFirmware UpgradeThis unit provides the Firmware Upgrade function to improve the unit functions andto correct errors.󰬒Connect the recorder to PC thru USB cable󰬓Execute DVR Manager and download ‘FSV510_FIRMUP.ROM’(UPGRADEFILE) to D folder of the recorder.󰬔After download is completed, disconnect USB cable.󰬕Power on the unit. Then the unit is upgraded automatically. Removethe batteries when ‘FINSH’appears on the display and put thebatteries on again.●Do not remove the batteries or drop or give a shock to the unit while upgradingfirmware.●Caution: In case of downloading upgrade file, there should be no file at D folder.●Caution: DVR Manager should be installed in advance. (Refer to Installation of DVR Manager)
Others42 Voice Recorder41 Voice Recorder1. Do not short-circuit, disassemble or heat the battery, or do not put the battery into a fire.Electrolyte such as an alkaline solution may flow out, so you may get it in your eyes, or it maycause the generation of heat, or the breakdown of the battery. 2. When the skin or clothes are stained with electrolyte such as an alkaline solution, wash thestain out with water immediately. If you get it in your eyes, seek immediate medical treatmentafter washing out the area of the eye with water. 3. Do not use the different kind of batteries together. 4. When the unit is not in use for a long time, remove the battery from the unit.For the Battery1. Do not repair, disassemble or modify this unit by yourself. 2. If smoke or deformation occurs due to the generation of heat, remove the battery from theunit immediately. 3. Do not use this unit in an airplane or place where the use of electronic machines areprohibited. 4. Do not use during you are driving or walking. It may cause an accident. For your safetyOthersPrecautionsImportant information on safe and efficient operation. Read this information beforeusing your voice recorder. 1. Do not drop the unit or give a shock to the unit. It may cause a malfunction. 2. Do not leave the unit in such a location as described below. - A place of very high temperature (60℃) - A place subject to direct sunlight or near heat sources - A car with its windows closed (especially in summer) - A place subject to excessive moisture like a bathroom - A place subject to excessive dust 3. Do not apply heavy forces to the LCD (Liquid Crystal Display) unit, or it may cause breakageor abnormal display taking into account the properties of liquid crystal. 4. If you place cards using magnetism such as cash cards or transportation pass cards near tothe speaker of the unit, the magnetism may be transformed due to magnetic influence so thatthe magnetic cards cannot be used any more. 5. Our company does not reimburse you for any loss from the use of the Voice recorder or anydemand of indemnity from a third party. 6. Message loss due to malfunctions, repairs, etc is not a responsibility of ours. Pleaseunderstand this. For the unit
Others44 Voice RecorderOthers43 Voice RecorderFor DVR-ManagerREC/PLAY iconsare inactive.Whenusing D확인1확인2TroubleshootingCheck the following items before asking a technical support.Is the battery's powerexhausted? ▶Replace the battery with a newone. (Refer to page 7)Is the battery installed to thecorrect polarity?▶Install the battery to the correctpolarityCHECK1Is the volume set to '0'?Has the sound card beeninstalled?Is the volume set excessivelyhigh?Is the external microphoneconnected to the PC (SoundCard)?Does the MIC IN (Microphone)become active at theRecording Control Window,when you click : Control Panel> Multimedia > Audio >Recording?Is the volume set to '0'?Is the earphone plugged inproperly?Is the earphone plugged in?▶Adjust the volume.(Refer to page 9)▶Adjust the volume.(Refer to page 9)▶Install the sound card first andthen reinstall the 'DVR-Manager'software.▶Adjust the volume of theDVR-Manager, since the excessivelyhigh volume may cause noise.▶Connect the external microphoneto the sound card and startrecording.(Refer to page 33)▶Cancel Mute function, if the unit isin the mode, and select the MIC IN.▶Plug the earphone in properly.▶Pull out the earphone completely.CHECK1CHECK2CHECK1CHECK1CHECK2CHECK2CHECK2LCD doesn’’tw o r k .No sound comesfrom the speaker.The earphonesdo not work.When using Voice RecorderRecordngdoesn’t work.Playbackdoesn’t work.CHECK1CHECK1CHECK2CHECK3CHECK2CHECK3Is the device locked by theHOLD key? ▶Release the HOLD keyHas the memory or filenumbers been used up?▶Delete unnecessary files. (Refer to pages 14)Is the battery's powerexhausted?▶Replace the battery with a newone. (Refer to page 7)Is the device locked by theHOLD key? ▶Release the HOLD keyIs the battery's powerexhausted?▶Replace the battery with a new one.(Refer to page 7)Is there any recorded file? ▶Check the folder and file numbers.Can't hear thevoice due to noise.Can't record withan externalmicrophone

Navigation menu