Foshan Lanchiya Digital Technology 000MD101 WIRELESS BLUETOOTH SPEAKER User Manual
Foshan Lanchiya Digital Technology Co., Ltd. WIRELESS BLUETOOTH SPEAKER
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2131900 |
| Application ID | p0cwyvdmuJRN3E1nXw2vww== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 73.13kB (914138 bits) |
| Date Submitted | 2013-12-02 00:00:00 |
| Date Available | 2013-12-02 00:00:00 |
| Creation Date | 2013-12-02 09:30:09 |
| Producing Software | Corel PDF Engine Version 15.2.0.686 |
| Document Lastmod | 2013-12-02 11:35:57 |
| Document Title | FCC带NFC带æ’å¡ç‰ˆè‹±æ–‡è¯´æ˜Žä¹¦ MD1-G01-0.cdr |
| Document Creator | CorelDRAW X5 |
| Document Author: | Administrator |
6.Re-pairing: To touch the PAIR button on the control panel for re-pairing, meanwhile the indicator will flash, and there is voice prompt” Waiting for the pairing”. then you can pair the MD1 with your Mobile, the voice prompt 【pairing completed】after paired. 9.Built-in battery use: when using the built-in battery to play music, the unit will manage the battery use automatically, when the power is low, the unit will decrease the volume to ensure the sound quality and longer play time, and voice prompt(NO battery please recharge) once in 1 minutes, the front indicator will be red and flash, When battery cannot support normal used unit will be power off after red indicator flash for 5 times. PAIR 7.TF card: Insert the TF card when MD1 is on, the Md1 will play music from TF card automatically, or you can press INPUT to select TF card, the front indicator will be orange, follow the step 4 to control the music playing. 10.Charging: the unit is with built-in battery, please use the supplied power adapter to charge it, the green indicator on the back of the unit will flash when charging. Whe n the battery is fully-charged, the green indicator will stop flash 6.Please use power adaptor which provide from Lanchiya to avoid damage your speaker. 7.Not work with NFC: please make sure the mobile has NFC function and turn it on. 8.The phone case may influence the NFC function, please remove if you cannot connect NFC as well. 9.Please recharge or user power adaptor when battery is low, for the device can work as well. 10.Please recharge the batter in every three months if long times no use. 11.The speaker has high capacity batter inside please avoid the heat, wet, do not disassemble the battery or put in into water or fire. 12.If you have problem with NFC, please check: 1)Make sure the mobile has NFC function, 2)Make sure the NFC and Bluetooth is ON 3)Make sure the NFC can activate the Bluetooth and audio in you mobile 4)Make sure the mobile is unlocked 5)Remove the phone case 6)Use the right part of NFC on your mobile 7)If the NFC found AMETHYST MD1 but can't connect, make sure MD1 is on and under Bluetooth mode SPECIFICATIONS INPUT 8.AUX input play: connect MD1 and Audio source with 3.5mm Audio Cable then touch the INPUT button on the control panel, the indicator will turn red and the unit will be connected to the AUX channel play. You can play music via 3.5mm from Mobile, Mp3, and PC. INPUT NOTE *1.The Bluetooth device can't find the speaker, the speaker may still connect with last Blue tooth device or another device are searching and connecting with speaker at same time. Now you need to operate as Step 6 to re-connect it 2. If you hear intermittent sound or no sound from speaker after connection Please check if the distance from you and speakers are in communication range (8-10M without barrier) 3.if you can not connect with speaker as well, please power it off for 3s then turn it on. 4.Don't let Opposite close to speaker when you use speaker phone function to avoid Echo 5.Please use default music player with your blue tooth device system like, iPod, Samsung player, Windows media player. As lots of third party music player does not support smooth song change function, to avoid “pu”sound. Amplifier output power: left/right 1.5WX2 /3Ω Subwoofer 5WX1 /2Ω A m p l i f i e r i n p u t s e n s i t i v i t y : ≤5 0 0 m V D i s t o r t i o n : ≤1 % Amplifier SNR: ≥ 75dB Frequency response:65Hz~20KHz DC input: DC9V 2.5A Battery: 7.4V 2000mAh Battery time 6-10hours Battery charging time: 4-6hours Blue tooth range: 8-10M Bluetooth version: 2.1+EDR Support A2DP Switching Power Supply Model:GT-WAAU09000250-102 INPUT:100-240V~50/60Hz 0.8A OUTPUT:DC 9V 2500mA Genesis Science Technology Limited Manufacturer:Foshan LANCHIYA Digital Technology Co., Ltd China Address : hongtu RD,Songxia lndustry Park,Songgang Nanhai District,Foshan, Guangdong Province,China MADE IN CHINA MD1 PROPERTY RIGHTS INFORMATION: The trademark amethyst lanchiya and all the developed products with this label are registered patents,and belong to Foshan LANCHIYA digitai Technology Co.,Ltd. Our company reservesall rights, and not allow reprinting.Other concerned trademarks a l l b e l o n g t o t h e i r p r o p r i e t o r s . As to t h e c o n s t a nt update and development of the products, our company reserves the right to change and rework our products without notice. WARING: To prevent an y f i r e o r e l e c t r i c a l hazards, do not remove or dissemble any parts from this unit. Please ensure that you use a qualified technician to service it. • Do not expose the unit to rain, water or moisture • Do not place liquid on or close to unit • Do not place unit on or near an open fire such as candles or light • Keep away from heat and dust • Place unit on a stable and level platform • Do not place any items on top of unit • Do not use excessive force when pushing the unit buttons • Do not attempt to pull the power cord from a distance to shut the power • The unit with Lithium Battery in please don't burn,bite,Keep away from Children and dispose in appointed place for battery • Secure all cords and connections and do not use pinched or defective one • Unplug the power cable if the unit is left unused for extended periods • Clean with a damp cloth only • Blue tooth device can't be found: probably, the Speaker has been connected by other Blue tooth device. Press Pair button to search it again. If you still cannot find the speaker, please Turn Off the speaker for 5second then turn it on. • Blue tooth signal intermittently: the effective distance between speaker and Device is 10M, the signal will be intermittent if the distance more than 10M. • If there are more than 1 Speaker are switch on, the Bluetooth device will find more than 1 speaker, if you want to connect one of them please turn off the others • If your Bluetooth device on searching and find many other Bluetooth device, please wait for the searching finished and select Speaker to pair. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed toprovide reasonable protection against h a r m f u l interference i n a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may ca u s e h a r m f ul interference to radio communications. However, there is no guarantee that interference will not occur in a particular i n s t a l l a t i o n . I f t h i s equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with a n y o ther antenna or transmitter.Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. ”batteries shall not be exposed to excessive heat such as sunshine, fire or the like.”“the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.” “CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.” where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable PACKAGE CONTENTS Brief Operation Introduction 1.Power-on Operation: After switching MD1 on, the Music and voice prompt (The Blue tooth mode is on) the indicate light on the front panel is flashing between blue and red, MD1 starts to search the device that connected last time. If the searching is successful, MD1 will connect automatically with the device, and voices prompt ”paired”. MD1 will play the music through the device. If the MD1 can't find the last paired device, MD1 will be in the status of being searched by other devices, and the indicator will be blue. 3.Connecting by Bluetooth: Search【AMETHYST MD1】 with your Bluetooth device after turn it on. If your device can not find the MD1, Press “Pair” on the top of MD1, voice prompt “Waiting for the pair” ,Find 【AMETHYST MD1】 and connect it The voice Prompt “paired” .Then you can play music from your Bluetooth device. AMETHYST MD1 ON PAIR AMETHYST MD1 4. Music-playing operation: When MD1 has successfully connected to the Bluetooth device properly, you can control the music-playing of the mobiles through touching theVOL+,VOL- PREV,NEXT,PLAY/PAUSE button on the 2. Connecting by NFC : 1).Make sure the MD1 is On and in Bluetooth channel. 2).Make the Cell phone have NFC communication which can activate the Bluetooth to pair and audio connection. 3)Make the screen of cell phone is unlocked. 4)Make sure the NFC and Bluetooth in your cell phone is on . 5) Make the NFC parts of cell phone and MD1 touch each other for 2second (if you can't make sure where is NFC part of your cell phone please google it, or move your cell phone on MD1 NFC part until it connected) the cell phone will show connect it or not on screen, press yes then you can move the cell phone and wait 5-8s, the cell phone will connect it with speaker and voice prompt Paired, then you can play music from your cell phone, (Note: of the cell phone has paired with MD1, it won't show connect it or not but connected or disconnected) touching panel PREV,NEXT,PLAY/PAUSE 5.Incoming-call operation: When the call comes in during playing music, answer the call by touching the button 【PHONE】on the touching panel and talk facing the top panel; or dial the receiver button on the mobile and choose to use mobile to answer the call PRESS YES 【PHONE】 1.MD1 machine 2. Power adapter 3.Audio cable 4 .User manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Author : Administrator Create Date : 2013:12:02 09:30:09+08:00 Modify Date : 2013:12:02 11:35:57+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Administrator Title : FCC带NFC带插卡版英文说明书 MD1-G01-0.cdr Creator Tool : CorelDRAW X5 Metadata Date : 2013:12:02 11:35:57+08:00 Producer : Corel PDF Engine Version 15.2.0.686 Document ID : uuid:5b3c6ce5-23ec-47a8-8150-089de950f7ca Instance ID : uuid:f797ed83-61b5-4fe1-b958-6fcf4ad0662a Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools