Foshan Lanchiya Digital Technology 00MK3001 Wireless Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4035155
Application ID	Q9npB3eP5s5jgNDbjv7wyw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	350.01kB (4375179 bits)
Date Submitted	2018-10-14 00:00:00
Date Available	2018-10-14 00:00:00
Creation Date	2018-09-27 09:21:28
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-09-27 09:21:28
Document Title	认证英文说明书MK30-GXX-0环保
Document Creator	CorelDRAW X5
Document Author:	ZLH

LANCHIYA
USERMANUAL
MK30
Work with
a k &0 20
Wireless & Bluctooth® Streaming for all your digital multi—media devices.
PROPERTY RIGHTS INFORMATION:
The trademark amethyst®lanchiya®and all the developed
products with this label are registered patents, and belong to
Foshan LANCHIYA digitai Technology Co. , Ltd.Our company
reservesall rights, and  not allow reprinting.Other concerned
trademarks all belong to their proprietors. As to the constant
update and development of the products, our company
reserves the right to change and rework our products
without notice.
SAFTY INSTRUCTION
To ensure your safety and enjoyment, please read and
follow the safety instructions.
WARNING:
* To prevent any fire or electrical hazards, do not disassemble
this product.
* Do not expose the speaker to rain, water, moisture.
* Do not place liquid on or close to the speaker.
* Do not expose the speaker under blazing sun for a long time.
* Do not place the speaker on or near the fire.
* Keep away from heat and dust.
* Place the speaker on a stable and level platform .
* Do not place heavy items on top of the speaker.
* Do not use excessive force when pressing the buttons on
the speaker.
* Do not attempt to pull the adaptor cable when removing
it from power outlet.
* Do not use damaged or defective cables.
* Clean with a soft damp cloth only.
* Adjust the volume to the suitable level in order to avoid
harming your hearing sense or damaging the audio system .
* Turn off the speaker and remove the cable from the power
outlet when you don‘t use the speaker.
P1
(s) used for this transmitter must be installed and operated
to provide a separation distance of at least 20 cm from alI
persons and must not be collocated or operating in conjunction
with a n y o ther antenna or transmitter.Installers must ensure
that 20cm separation distance will be maintained between
the device {excluding itshandset) and users.
"batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.""the apparatus shall not be exposed to
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus."
"CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type."
where the MAINS plug or an appliance coupler is used
as the disconnectdevice, the disconnect device shall
remain readily operable
FCCID:P4LOOMK3O01
Caution: The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the
equipment.
SPECIFICATIONS
Amplifier output power: 20W»x2 (RMS) / 40
THD : <1%
Amplifier input sensitivity : <775mV
Amplifier SNR : > 750B
Frequency response: 70Hz—20 Khz
Input power: DC16 =2.5A
Bluetooth version: V4.2+EDR
Bluetooth frequency: 2.402GHz — 2.480GHz
Bluetooth range: 7—10M
Power voltage: AC100—240V ~ 50/60Hz 1.5A
Manufacturer:Foshan LANCHIYA Digital Technology Co., Ltd China
Address : hongtu RD,Songxia Industry Park,Songgang
Nanhai District,Foshan,Guangdong Province, China
*Package Contents
1.Speaker  2.AUX Cable  3.ACAdaptor  4.User Manual
* Control Panel Instruction
G e G
C OM
L.MODE/PAIR 2.LED 3.Play/Pause 4.Volume— 5.Volume+
6.NFC 7.AUX Input 8. Power Button _ 9. DCIN
FUNCTION AND PORT DEFINITION:
PAIR/M: At the Blutooth mode, long pressing it for 3 seconds
to activate the pairing status. Short press it to change
the modes.
p2
LED: Press it to change the background light mode(from
automatic color changing, to brightest white light, to
darker white light, to much darker white light, to light
off. Cycle according to this order). Long press it for 3
seconds to turn off the background light. Repeat to
enter the automatic color changing mode.
Bass Boost: Press it to increase the bass, and meanwhile the
LED light will be on. Repeat to cancel the bass boost.
: Press it to increase the volume.
:Press it to decrease the volume.
NFC: Quick Bluetooth connection
The port on the backside:
AUX: 3.5mm audio cable input port.
STANDBY: Control power on/off through it.
DC IN: The port for inputting DC power end of the adaptor.
BRIEF INSTRUCTIONS
1.POWER ON / OFF:
1.1. POWER ON
Plug the power adaptor into the power outlet(AC100—240V},
and insert the DC power end into the DC IN porton the
backside of the speaker. Press the power button "STANDBY"
on the backside of the speaker, then the background lights
will be on and in the status of automatic color changing, and
the indicator light on the button " $/M " willkeep on. Then the
speaker will prompt "du...du...du...du" after 3 seconds. It will
automatically search the Bluetooth device which has been
paired last time, and prompt "du" when it is paired. If it is
failed to pair, the speaker will enter automatically the status
of being searched by other Bluetooth devices.
1.2. POWER OFF
1.2.1.Press the power button "STANDBY" on the backside of
the speaker. Please pull out the power adaptor from
the power outlet if the speaker will be kept idle.
P3
3.AUX mode
3.1.When the power is on, insert the 3.5mm AUX cable into
the "AUX port"on the backside of the speaker. Then the
mode will be automatically converted to "AUX mode".
The speaker will prompt "du...du". Then you can play
music by connecting your Bluetooth device and the
speaker with the 3.5mm AUX cable.
3.2.The indicator light on " $/M will keep off when under AUX
mode.
4.Play control
4.1.When play music under Bluetooth mode, press the button
to pause or play the music.
4.2.Press the button
indicator light on "yoy4" 0r " yor.." will twinkle accordingly.
or to control the volume. The
The speaker will prompt "du" when the volume is minimum.
The speaker will prompt "di" when the volume is maximum .
4.3.ong press the button or to change the volume
to be maximum or minimum. The indicator light on ‘you+"
or "yor.." will keep twinkling accordingly. But the indicator
lights will be off when you remove your finger from the
buttons.
5.Mode conversion
5.1.Turn on the speaker (wait until the speaker prompts
"du...du..du...du"), it will be under Bluetooth mode if there
is no AUX cable inserted in. The speaker will convert to
AUX mode automatically when the AUX cable is inserted.
5.2.Press the button to convert the modes between
Bluetooth mode and AUX mode. When the indicator light
is on, it is Bluetooth mode. On the contrary, it is AUX mode.
PS
1.2.2.The speaker will automatically power off if without
being paired with any Bluetooth device for 15 minutes
or stops playing music for 15 minutes. Please restart
the speaker by pressing the power button "STANDBY".
2.Bluetooth mode
2.1. Bluetooth
2.1.1.When power on, long press the button " @ " for 3 seconds
(The indicator light on " $/M _ " will twinkle 3 times}. The
speaker will prompt "di...du". Then choose "MK30" on the
Bluetooth list of your Bluetooth device. The speaker will
prompt "du" when it is paired. After that, the speaker will
automatically search the Bluetooth device which has been
paired last time when power on (When the Bluetooth
function is open and within communication range}.
2.1.2.The indicator light on " $/M " will keep on when under
Bluetooth mode.
2.2.NEC
2.2.1.When the power is on, longpressthe button
and The indicator light on " $/M " will twinkle 3 times. The
speaker will prompt "di...du". Move the NFC antenna position
of the mobile to the NFC silk—screen logo "N" for 2 seconds.
2.2.2.Choose "yes" when the mobile displays the option to pair
the speaker. Then move the mobile and wait for 3—10s until
successful pairing. The speaker will prompt "du" when it is
paired. (Note: If the mobile has been paired with the speaker,
it will not display the option to pair the speaker, but display
the reminding message of connected or disconnected).
2.2.3.Note
1)Make sure the speaker is on and under Bluetooth mode.
2)Make sure the mobile has NFC communication which can
activate the Bluetooth to pair and audio connection.
3)Make sure the mobile screen is unlocked.
4)Make sure the NFC and Bluetooth in the mobile are on
pa
6.Control the background lights
The background lights will be on and in the status of automatic
color changing when the speaker is turned on. Press the button
, the brightest white light will keep on. Press the b
again, the white light will be darker. Press the button
he ird time, the white light will be darkest. Press the
button for the fourth time, the white light will be off.
Press the button for the fifth time, then the background
lights will be on again and in the status of automatic color
changing. Long press the button
will be off. Long press the butto
the lights will be on again.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed toprovide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.However, there is no
guarantee that interference will not occur in a particular instalI
ation.If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC‘s RF radiation exposure
limits set forth for an uncontrolled environment. The antenna
PG
for 3 seconds, the lights
for 3 seconds again,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ZLH
Create Date                     : 2018:09:27 09:21:28+08:00
Modify Date                     : 2018:09:27 09:21:28+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : CorelDRAW X5
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Creator                         : ZLH
Title                           : 认证英文说明书MK30-GXX-0环保
Document ID                     : uuid:5728eb0e-c857-45ae-9f21-3d89e056805f
Instance ID                     : uuid:f6f00319-3549-4e8c-b7f9-65d6382a8a2f
Page Count                      : 2

EXIF Metadata provided by EXIF.tools