Foshan Shunde Ya In Electric Appliance Manufacture C74E-BBBC01 Induction Cooktop User Manual C74E BBBC01 2016 8 22

Foshan Shunde Ya-In Electric Appliance Manufacture CO.,LTD Induction Cooktop C74E BBBC01 2016 8 22

160803130GZU_ZFB-C74E-BBBC01_User Manual

User Guide Four Burner Model:C74E-BBBC01 C74E-BBBC02
Table of Contents I. Important Safety Information................................................1-4 II. Control Panel Overview..........................................................5 III. Specifications How to Use................................................6 & • Heating Power for Each Cooking Zone.................................6 • ...............................................................7Operating the keys IV. Compatible Cookware............................................................10 V. Cleaning and Maintenance..............................................10-11 VI. Counter Installation Instruction.......................................12-15 VII. Troubleshooting...............................................................16-17 Fill out the following information for future reference Brand Purchase Date Model Number Serial Number • ..............................7Switching on the hob and cooking zones• ..................................................................7Standby Mode.....• ................................................................7While in cooking....• ............................................................7While in stop cooking• ...................................................................8Lock....................• .....................................................................8Turn off.............• Timer ......................................................................9................VII . FCC STATEMENT...............................................................18 IYou can download an owner's&installation manual at WWW.CHINAJIANAN.COM. Thank you for purchasing the our Induction four burner unit.Please read the entire instruction manual prior to using your unit.
. 1 When using electrical appliances,basic safety precautions should always be followed.For the Induction cooker, even with the built in safety features,it isessental to heed all precautons. - I. Important Safety Informaton Do not use outdoors, The Inducton cooktops are designed for household use. To avoid potental injury,do not use accessory atachments which aren’trecommended by the manufacturer. In case of appliance failure, immediately disconnect the appliance from the mainpower source and contact the manufacturer.Wear proper-. loose fitng or hanging garments should never be worn while using theappliance Do not use cooktop for another use than directed by the manufacturer. Do not use with empty pans/pots. The cord should be arranged so that it will not drape over the countertop or tabletopwhere it can be pulled on by children or tripped over.The marked electrical ratng should be at least as great as the electrical ratng on theappliance . To prevent accidents and achieve optmal fan ventlaton, allow for su cient spacearound the cooking area. ffi Items with a magnetc filed such as:radios,televisions,credit cards, cassete tapes etc.,can a ect the unit. ffDo not store and temperature-s ensitve objects, materials, or substancesunderneath the cooktop,such as:detergents,sprays,etc. Do not place cooktop on or near:hot gas, electric burner, or heated oven. Avoid preparing food in aluminum foil or plastc containers over the hot cooking zones.Do not let the cord dangle over the edge of a table or counter Keep the cord awayfrom hot surfaces. . Do not cook on a broken or damaged cooktop as spillovers may penetrate surfaceand create a risk of electric shock. Do not operate any appliance with a damaged cord or plug afer a malfuncton orif it has been damaged in any , manner.Read the seller’s guidelines for warrantyrepairs and returns. When using any electric appliance around children,close supervision is strongly suggested. To protect against electric shock, do not immerse cord plugs or cooker in water (or other liquid substances). When the unit is on,do not touch outside the control panel as the surface maycontain residual heat. Never leave the cooktop unatended at High Heat setngs or when cooking oil or fat -boil over causes smoking and greasy spillovers that may ignite. While cooking any overflowed fat or oil on the cooktop may ignite There is a risk of burning and fire; therefore,control . the cooking process at all tmes. Installaton of the appliance into a kitchen countertop and its connecton to themain power and electrical supply may only be performed by a qualified technician.
I. Important Safety Informaton
Do not place metallic objects such as knives, forks, spoons, lids, cans oraluminum foil on the cooktop. To prevent accidents and achieve optimal ventilation allow for sufficient spacearound the cooking area. , The appliance is manufactured in compliance with the relevant effective safetystandard. Nevertheless, we strongly recommend that a person with physically ormentally impaired, do not use the appliance unless accompanied by a qualifiedperson.The same recommendation applies to children. It is important to be aware that the unit’s surface will remain hot for a shortperiod of time after use. Unplug the cooktop from the outlet when not in use and before cleaning.Allow to cool before performing any maintenance or repairs. Clean cooktop with caution-do not clean while unit is still hot,some cleaners product steam or fumes if applied to a heated surface.Do not store items of interest to children in cabinets above the range or on the backguard of a range-children climbing on the range to reach items could getseriously injured. The power cord has been sized accordingly, however, with caution and care,anextension cord may be used. To reduce risk of burns,ignition of flammable materials,and spillage due tounintentional contact with cookware,the cookware handles should be turnedinward and not extend over adjacent heating surface. Clean cooktop with caution-If a wet sponge or cloth is used to wipe spills on a hot cooking area,be careful to avoid steam burn. Some cleaners can product noxiousfumes if applied to a hot surface. Do not use steam cleaners or high-pressure cleaners to clean the cooktop,asthis may result in electric shock. 3 I. Important Safety Informaton If the malfunction light goes on, or if the audible signal sounds, appliance is malfunctioning. Turn off or disconnect appliance from power supply and have serviced by a qualified technician.DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to causeburns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among these areas are Cooking zoneClean Cook-Top With Caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.of electric shock. Contact a qualified technician immediately.Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified technician immediately.Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified technician immediately.
SAVE THESE WARNINGS 4 I. Important Safety Informaton This product should not be thrown away as household waste Instead it shouldbe handed over to the applicable collection point for the recycling of electricaland electronic equipment By ensuring this product is disposed of correctlyyou will help prevent potential negative consequences to the environment andhuman health which could otherwise be caused by inappropriate wastehandling of this product For more detailed information about recycling of thisproduct please contact your local city office your household waste disposalservice or the store where you purchased the product. . . , , . , ,
5 II. Control Panel Overview 1. Left rear cooking e2. Left front cooking e3. Right rear cooking 4. Right front cooking lementlementelementelement6. Left rear cooking element control area7. Left front cooking element control area9. Right front cooking element control area10.Right rear cooking element control area11. Main Power On/Off12. Main Power indicator light13. Controls Lock14. Control Lock indicator light15. Stop/Go16. Stop/Go indicator light111215 13141617. Cooking element symbol and Power On/Off18. Increase power19. Decrease power 20. Heat level and Residual heat display 21. Power Boost symbol and indicator light 19 18 1720 2122. Minute timer 23. Minute timer setting Up24. Minute timer setting Down25. Minute timer display window and cooking element symbol2224 232510 9612347
Heat setting displaysDISPLAY DESCRIPTION No power level for the element The keep warm function The power level The power boost A cooking element is still hot to touch (residual heat) Electronics fault error message of specific cooking element Error code STOP/GO C74E-BBBC01Product dimension wxdxh inch ( )Cut-out dimension(wxd) inch Voltage volts ( )Frequency Hz ( )Total power Watts ( )Elements- Front Left Rear Left Front Right Rear Right CenterModel23 1/3"x20 1/2"x2 3/16"Min.:18 15/16"x21 15/16"Max.:22 7/16"x20"24060740041850W 2400W/1850W 2400W/1600W 1800W/2100W 2700W/N A/
III. How to Use 7 While on standby mode, press the main key, the induction hob will make a “beep” sound once indicating that it is ready to use. If only the indicator light above the key is lit up, the unit will automatically return to standby mode if the Cooking zone ON/OFF key or Lock key are not chosen within 30 seconds.“ ”“ ”Readiness ModeSuitable for induction cooktop91PWhile in the Power level 1, touch “ ” key to enter into Keep Warm mode, L.-Power digital will switch from 1 toWhile in cookingpress“ ”key all cooking zone stop and “ ”, cookinglight blink.While in stop cooking press“ ”key all cooking zone b and “ ”, , eing usedlight blink.light turn off, cooking zone will turn on standby mode ifdon’t press within 10 minutes. “ ”Place a compatible pot or pan on the cooking zone you wish to use.With the hob being ON as mentioned above, press the desired cooking zone . The display will blink and show a “-”.Press either the “+” key, “-” key, to select a cooking level. The cooking zone will automatically turn on standby mode if a key is not pressed within 30 seconds.Press the minus key (-) to lower the cooking level.Press the Plus key (+) to raise the cooking level.ON/OFF key “ ” key, Pressing the “ ” key will show on the display as a “ ”, boosting the heating power to the highest level.Switching on the hob and cooking zones
III. How to Use 8 LockTurn offa. Press the ON/OFF key of the cooking zone being used. It will make a “beep” sound once,and it will turn off.b. Turn off the entire unit by pressing the “ ”key,which will also make a “beep”sound once,and the indicator light will turn off.The Unit is now on standby mode. : Please do not pull the power plug until the cooling fan has stopped. Note Child Lock prevents activation of any sensor keyPress the Lock key to activate the function. The unit will make a “beep” sound and the indicator light will turn on above the Lock key. The controls are now locked.While in Lock mode, press the Lock key to deactivate the function. The indicator light will turn off.Activating the Child Safety Lock during cooktop use:A. Manual: Switch off the lock
III. How to Use 9 TimerSetting the Timer to Automatic switch-off:After using any of the cooking zones, the cooktop will remain very hot. Even after turning off the entre unit, the surface of the cooktop will remain hot for some time. The display for the cooking zones will display an “H” to warn the user that the surface is hot to the touch. Wait until the “H” is no longer displayed to clean the unit. You may turn the unit back on even if the “H” is displayed.With the desired heating zone Powered ON, press the “Timer” key. The timer display will blink and show a “00”, Press the “+” or “-” to increase or decrease to the desired time until the desired time appears in the display (Choose up to 99 minutes). Once the Timer is set, if keys haven't been pressed after 5 seconds, it will begin to countdown, the timer display will remain lit, the indicator for that particular burner will flash. If you want to set another burner to switch-off automatically, repeat the same steps.If you want to check the remaining time for another zone, press the “Timer” until the indicator for the desired burner blinks.If more than one switch-off time is programmed, the shortest time remaining will show in the display, the indicator for that particular burner will flash.Press the “Timer” until the indicator for the desired burner blinks, then press the “+” or “-” to set the timer to 0. The Timer display will blink for 5 seconds and then turn off, indicating that the timer of selected heating zone has been cancelled.Cancelling the timer:When the time reaches “0”, a “beeping” sound will go off indicating that the time is up, and selected heating zone shut off automatically.press “Timer” key to until the desired timer indicator blink,
Inducton requires pots and pans that are made of ferrous(meaning magnetc) materials. Check your cookware’ s retail box for the inducton symbol. To tell if your current cookware is compatble with the inducton technology, grab a magnet and see if it holds to the botom of the cookware. If your magnet stays on then your cookware is ready to be used on the Inducton four burner inducton drop- in cooktop! 10 IV. Compatble Cookware The following are not compatble:heat-resistant glass,ceramic,copper,aluminum pan/pots,round-botomed cookware,or cookware with a base less than 5 inches. V. Cleaning and MaintenancePlease follow these directions along with Important Safety steps for cleaning, advised at the beginning of the manual. Use a ceramic cooktop cleaner on the glass cooktop.To maintain and protect the surface of your glass cooktop,follow these steps:Before using the cooktop for the first time,clean it with ceramic cooktop cleaner.This helps protect the top and makes cleanup easier.1. Daily use of ceramic cooktop cleaner will help keep the cooktop looking new.2. Shake the cleaning solution well. Apply a few drops of ceramic cooktop cleaner directly to the cooktop.3. Use a paper towel or a soft cleaning pad for ceramic cooktops to clean the entire cooktop surface.4. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse. Never run the cooktop under water. NOTE: It is very important that you DO NOT use the cooktop until it has been thoroughly cleaned. CAUTION: Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could beseriously injured.Optmally the cookware will have this inducton image on the retail box:
Cleaning Burned on Residue: 1.Allow the cooktop to cool.2.Spread a few drops of the ceramic cooktop cleaner on the burned residue area. 3.4.If any residue remains,repeat the steps listed above. 5.Cleaning heavy burned - on residue: 1.Allow the cooktop to cool.2.3.4.Metal Marks and Scratches : . . 11 V. Cleaning and Maintenance: NOTE: manufacturer for assistance. If cracks or indentatons in the glass surface occurs,the cooktop glasswill have to be replaced.Contact the If pots with a thin overlay of aluminum or copper boil dry,the overlay may leave a black discoloraton on the cooktop.This should be removed immediately beforeusing the cooktop again or the discoloraton will be become permanent. Be careful not to slide pots or pans across the cooktop surface It will leave behindmetal markings These marks are . . removable using the ceramic cooktop cleaneralong with the cleaning pad for ceramic cooktops For additonal protecton,afer all residue has been removed,polish the entresurface with the ceramic cooktop cleaner and a paper towel. Afer scraping o the residue,apply a few drops of the ceramic cooktop cleaning soluton on the entre burned residue area.Use the cleaning pad to remove anyremaining residue. Used a single - o the residue.edge razor blade scraper approximately at a 45 degree angleagainst the glass surface,and scrape ff For additonal protecton,afer all residue has been removed,polish the entresurface with the ceramic cooktop cleaner and a paper towel. Using the included ceramic cooktop cleaning pad, rub the residue area,applying pressure as needed. WARNING materials.: Damage to the glass surface may occur if you use scrub pads or any other type of abrasive cleaning
VI.Counter Installation Instructions: Warning!For Your Safety:Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.To eliminate the risk of burnsor fire due to overheating,cabinets located above the induction unit should beavoided.If cabinet space is available the risk can be reduced by installing a range hood that protects horizontally at a minimum of 5 inches below the bottomof the cabinets. , IMPORTANT INSTALLATION INFORMATIONFigure1 12 J30"(76.2cm)min.for cabinet.**Do not obstruct these areas.K (Air exit)L (Air intake)All electric cooktops run off a single phase,three-wire cable,240V/60Hz AC onlyelectrical supply with ground.Minimum distance between cooktop and overheadcabinetry is 24".
13 VI.Counter Installation Instructions: Cooktop Dimensions A Width. B. Depth C. Height 23-7/32" 20-15/32"5/32"2-5/32"D. HeightE Depth. G Depth. Minimum:21-31/32" Maximum 22: -7/16"F Depth.Minimum:18-29/32" Maximum 19-7/8": Minimum 13/32": Maximum 25/32": Cooktop Cutout Dimensions H. Depth I. Depth Minimum 3-11/32":Minimum 1-31/32":J. DepthMinimum 30":K. HeightL. Height4-23/32"1-31/32"
1.Visually inspect the cooktop for damage .Also make sure all cooktop screws are on tight.2.Place the cooktop into the countertop cutout.Model and Serial Number Locaton : The serial plate is located under the cooktop. When ordering parts or making inquiries about your cooktop be sure to include the model and , serial numbers . Connectng to a 3 wire power supply cable electrical system 1. Disconnect the power supply. 2.Contnues on next page Before installing the cooktop:Cable from Power SupplyGreen Wire(Grounding)Junction BoxBlack WiresWhite WireCable from appliance 14 VI.Counter Installation Instructions: In the circuit breaker,fuse box,or juncton box,connect appliance and power supply cable wires as shown below.
3. Circuit breaker fuse ratng must be above 0 A. 44.5. A wire-binding screw or stud used in the wire terminal should be 10 or larger. 1.2.Connectng to a 3 wire power supply cable electrical systemWarning! 15 VI.Counter Installation Instructions: lmportant-Save for the local electrical inspector's use.3. To eliminate the risk of bums or fire by reaching over heated surface units,cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided,the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.An extension cord must not be used with this appliance Such use may result in a fire,electrical shock or other .personal injury.The electrical power to the cooktop must be shut o while line connectons are being made.Failure to do so ff could result in serious injury or death. Minimum acceptable size of conductors should be no less than 10AWG,copper only,and no less than167 .F
16 If the display shows an error code,please refer to this sheet for a potential solution. VII.Troubleshooting Error CodesThe cooktop features an automatic shut off that turns off the entire cooktop if any of the cooking zones have been on continuously for 2 hours.The cooktop control panel may read liquids or objects obstructing the panel, which can cause the cooktop to shut off. Clean up spills or remove objects, then restart the unit.Cooktop turns off while cookingPower boost does not workThe fans keep running for one minute after the unit has been switched offCooktop does not heat upCooktop does not work7400
17 If the display shows an error code,please refer to this sheet for a potential solution. Error Code Possible Cause Soluton appears on the Power display See E0,E1,E2,E3,E7,E8,E9,EE “ ”E0 appears in the Timer display IGBT overheating.appears in the Timer display No cookware found or improper placement of cookware on the cooking zone. Make sure the cookware is centered on the cooking zone,and that it’ s also inducton compatble.See Compatble Cookware.appears in the Timer display This may be caused by reduced voltage being appears in the Timer display appears in the Timer display NTC1 break ofappears in the Timer display NTC1 short circuitappears in the Timer display NTC2 break ofappears in the Timer display NTC2 short circuit“ ”E1“ ”E2“ ”E3“ ”E7“ ”E8“ ”E9“ ”EE“ ”ETurn of unit untl to allow IGBT tocool.Restart unit.supplied to the house circuit If the connectons . are correct and supplied voltage returns to normal the code will disappear., VII.Troubleshooting Error CodesThis may be caused by increasedvoltage being supplied to the housecircuit.If the connectons are correct andthe supplied voltage returns to normal,the code will disappear . Turn OFF the cooktop;then shut of thepower at the fuse or circuit breaker for about 30 seconds.Turn the power backon to the cooktop then press thePOWER buton to turn on the unit.If theerror message is stll beingdisplayed,call for service. If the voltage of the power supply to the cooktop is too high,it cannot operator properly and wil show this error code. If the voltage of the power supply to the cooktop is too low,it cannot operateproperly and will show this error code. Electronics fault errormessage of specifc cookingzone. Supplied voltage to cooktopis too high.Supplied voltage to cooktopis too low.
VIII.FCC STATEMENT:Th is device comp lie s with P art 18 of the FCC Rules.FCC STATEMENT;NO TE: 18 3. If this equipm ent do es cau se ha rm ful in ter ferenc e t o rad io or te levi si on re ceptio n, whi ch can b e dete rm ined b y turn in g t he eq uipm ent off an d o n, th e us er is en courag ed to tr y t o c or rect t he int er fere nc e b y o ne or more of t he fo llowin g m eas ure s: -- Reor ient o r relo ca te the rece ivi ng antenn a. -- Incr ease t he sep ar atio n bet wee n the eq uip ment and recei ver. -- Con nect the equi pme nt int o an ou tle t on a c ir cuit di ff eren t from th at to whic h t he re ceiv er is c onn ect ed. – Con sult the deale r o r an exp eri enc ed ra dio /TV techn ici an for h elp .1. This equi pme nt has b een test ed an d f oun d to com ply with th e lim its for a Co nsumer IS M equ ipm ent , p ur suan t to Par t 18 of th e FCC Rules . T hese limi ts ar e de signed to p rov ide reas ona ble prote cti on aga in st har mfu l i nt erfe rence in a re sident ial in sta lla tio n. Th is equ ipm ent gener ate s, use s and can rad ia te ra dio frequ enc y ener gy an d, if n ot ins talled and use d in acc or danc e wit h t he in struct ions , may caus e h ar mful i nte rferen ce to ra dio co mmu nic ati ons . Ho wever, th er e i s n o gua ran tee that inte rfer en ce wil l not oc cur in a pa rticul ar ins tal lat ion .2. Please no te th at ch anges or modif ica tio ns of th is pr oduct is not expres sly ap proved by t he par ty re sp onsi ble for co mpli an ce cou ld voi d the user 's au thorit y t o ope rate t he equ ip ment .

Navigation menu