Foxconn Interconnect Technology Branch FF05-05DB A4WP 5W OTT PTU User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2804039
Application ID	nXKe+NAGDYITfZ/Klvdljg==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.88kB (861038 bits)
Date Submitted	2015-11-05 00:00:00
Date Available	2015-11-05 00:00:00
Creation Date	2015-11-02 13:58:00
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2015-11-02 13:58:00
Document Title	User Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	power

420mm

A4WP Wireless Charger Kit
User Manual of PTU&PRU Kit
3.Certification List
1.Packing List
User Manual
5.Quick Start Instructions
• PRU *1SET (including two pieces: a protective transparent
shell and a charging receiver sleeve)
Types
Market
A4WP
A4WP
adapter into an AC power outlet. The PTU LED light should
turn white, indicating ready to charge. The PTU can be
laid flat or up at an angle using the pull-out stand at
the back.
Plug Seat
Notes
A4WP certification
• AC Adapter*1PC
• User Manual*1PC
2.Product Illustration
PRU
connector (PPID:101597-0270)
FCC
European Market
FCC regulatory certifications
PRU FCC ID: 2ADB4-FF05-05DA
American Market
iPhone 6
MFi certification test using Apple Lightning
MFi
Apple Inc.
6.Troubleshooting Guide
Step 1:Connect the AC adapter to the PTU; then plug the
Sheet 3:Passed Certification
• PTU *1PC
CE
PTU FCC ID: 2ADB4-FF05-05DB
Step 2:Insert iPhone 6 into the protective transparent shell.
Lightning connector
State Light
AC Adapter
China Local Market
SRRC
China State Radio Regulation
BSMI
China Taiwan market regulatory approval
China Taiwan Market
PTU
NCC
125mm
DC Power Jack
State Light
UL
AC Adapter
Step 3:Slide iPhone 6 into the PRU sleeve and make sure
the Lightning connector is securely connected.
Safety certifications for AC adapter
CCC
Pic.1:Product Photos
4.User Guide
Note: iPhone 6 is NOT included.
For your safety and a satisfactory user experience, please read the
following carefully before using the product:
Sheet 1:Basic Function
PRU
PTU
Input Voltage: DC 12V
Output Voltage: DC 4.75-5.25V
Input Current: 2.0A Max
Output Current: 0-1A
Frequency: 6.78MHzÂą15KHz
Output Power：5W(MAX)
Function:Over current, over voltage and over temperature protection
A4WP：Alliance for Wireless Power
PTU：Power Transmitter Unit
Sheet 2:LED Light States
PRU：Power Receiver Unit
Standby
Parts
Thank you for your purchase. Please read this manual in detail before using
Charging
Power off
In Error
PTU
White
Blue
Red
No Light
PRU
Green
No Light
No Light
the products and keep it for your future reference.

a. Do not put the PTU on a metal or ESD (electrostatic discharge material)
surface during use.
b. Avoid placing metal or other conductive material near the PTU (at distance
no less than 6 inches).
c. Power supplied to the PTU by the AC wall outlet must be 90V-264V/47-63Hz.
d. Recommended operational environment: Temperature 0~35℃,
Humidity 10%~75%RH
e. Rattan PRU is designed specifically for use with iPhone 6. Do not place the
PRU itself on a PTU without the phone. The PRU can be used with any other
A4WP certified PTU, but it is strongly recommended that you use it with Rattan
PTU for best performance.
Step 4:Put the PRU within the PTU charging area in a vertical
orientation.The PTU LED light should turn blue and the PRU LED
light should turn green when charging starts.If one of the lights is
not shown correctly, try picking up the phone and placing it in the
center of the charging area again.If the problem persists, please
read the “Troubleshooting Guide”.
f. Rattan PTU is meant to be placed on top of a flat non-metal surface
(such as a desk) with the PRU and the phone placed directly on top of the
PTU. This PTU is not designed to be used under the table. This PTU can be
used to charge any other A4WP certified category 1-3 devices including phones.
g. To comply with RF exposure requirements the charging mat must be used
on a table top or similar and provide a minimum separation distance of 20cm
from the charging surface to users.
Green Light
Blue Light
Step 5:Put the PTU on a table top or similar and provide a minimum
separation distance of 20 cm from the charging surface to you.
6.1.Why is the phone not charging？
Answer:The PTU LED should be blue and the PRU LED should be
green when charging is working normally. (Note that the light will still be
on when the battery is fully charged.So the iOS charging indicator on
the iPhone is the most accurate indicator of whether charging is indeed
happening.)
If the iOS charging indicator is on but the PTU or PRU LED light are
not showing that, it is possible that PTU or PRU LED light is
malfunctioning.
If charging is not working properly, first try to remove the PRU from
the PTU surface and then put it back in the charging area again.
If it is still not working, check if the PTU surface is hot. If it is not hot,
disconnect the AC adapter from the wall outlet for about 10 seconds and
then reconnect again.If the PTU surface is hot, please disconnect the
AC adapter from the PTU for approximately 30minutes to allow it to cool
down before trying again.When the PTU temperature is too high, it will
shut down power transmitting via the built-in over temperature protection
feature.
6.2.Other things to double check：
a.Check that the phone is iPhone 6 as this model PRU is meant only
for use with iPhone 6.
b.Check that both the PRU and PTU have an A4WP certification logo
and support iPhone 6. It is best to use the Rattan PRU and Rattan PTU
together.
c.Check the PRU, PTU and AC adapter to see if there is any sign of
damage. Some damage may cause malfunction and repair or
replacement is necessary.
d.If you still have trouble after trying or checking all of the above,
please take the product to a repair center for help. Do not open the
product and try to repair it by yourself.
7 . Storage Instruction
If you do not plan to use the product for a long time, it is suggested
that you put the PRU, PTU and AC adapter back in the box, and keep
the box in a dry and well ventilated place with normal temperature
(0~35℃) and humidity (10%~75%RH).Extreme temperature (too high
or too low ) may shorten the product life and increase the risk of
damaging the product.
If the product becomes damp, please make sure to dry it before
using it again.
Handle the product with care. Dropping the product components
may cause permanent damage.
Use a dry and clean soft cloth to clean the product surfaces.
Keep the products away from children, our products are not
toys for children.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
8.Exoneration Clause
8.1 Do not disassemble and attempt to repair or replace any
part of PTU, PRU or adapter. Don’t attempt to charge by any
method other than described in the instructions. If not, it may
result in product damaged and manufacturer is not responsible.
8.2.
Wireless charging
Magnetic Field Present
May have effect on medical implant wearers
8.3.
Wireless Charging Area
Risk of Shock or Burn from metal surfaces. Keep all
liquids and conductive materials off the charging mat.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
During PTU operation the PTU temperature is
higher; do not block the ventilation holes and do
not touch the surface directly as there is a risk of
being scalded or causing a fire.
8.4.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Keep NFC Tags, DVDs and CDs off charging
surface to avoid being damaged
8.5.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
9.Industry Notice to Users
This equipment should be installed and operated with minimum distance 20cm
Model: PTU FF05-05DB,PRU FF05-05DA
between the radiator & your body.
This device complies with part 15 and Part 18 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Foxconn Interconnect technology Inc.
1688 Richard Avenue, Santa Clara, CA 95050
Modifications made to this device, unless expressly approved by
Foxconn Interconnect technology Inc., may void the user’s rights to
operate this equipment.
A4WP q r [   
PTU&PRU
,-
3.œ¡
1.
5.ÞTU
¢3:¶·Õ“)A
• )*1

•  （"#$%&1，）
ÓÔ
œ¡¸š
Zâ[\
• 1
•
Ÿ½ž¿
qr[º
A4WP
ÀÁÂÃ
MFi
+,-/
2.<=>?@
PRU
ՓA4WPqr[Ö×ØYÙR¶·
ÀÁBCDEF,cՓ
ÀÁ¤GIãJK¶·ÙR
(PPID:101597-0270)
FCC
iPhone 6
Äż½

CE
ՓÄż½L-M¸<=NOP7
àQXÖ×,Þß,RYXÙR¶·
PRU FCC ID: 2ADB4-FF05-05DA
PTU FCC ID: 2ADB4-FF05-05DB
TUV：iiPhone 6 W>W3#$%&;

ªÆÇ
SRRC
PTU
BSMI
DC
ªÆÈÉ
>1:<=>?
NCC
–:S<=j—iPhone 6 ,˜™š
UL

CCC
ՓªÆǼ½L-M¸<=NO
P7àQXÖ×,Þß,RYXÙR¶
¡
4.

TUl：i,˜m3，m3“nªEo¾$-A,˜
o，c$~pEo[q[3,˜o;
ՓªÆÈɼ½L-M¸<=NO
P7àQXÖ×,Þß,RYXÙR¶
¡
234: DC 12V
2s4: DC 4.75-5.25V
235: 2.0A Max
2s5: 0-1A
679;: 6.78MHzÂą15KHz
~2s€;：5W(MAX)
âã,å™
d.{ÁéôÄj]IƒÅX}~，îï‰iS<=ƟCJªÃÇ
ȶ，ÉÊj¾QRFGHICJ。
b.)*ùú6ûü（ý15þÿ）
úšðmnñòOPÛâ;
c.)*234™90V-264V
，9;™ 47-63Hz
TUr：i,˜stóð^PTU[uvš,X¦W¥³¥
¯w，)*X¦W¥²¥¯w，x,˜ey[;
{Á|}~,,˜Vw€‚ðPTU[uvšÕ¬\éIƒ}~;
{Á„|}~,å “¬†}~Iƒ¤‡”;
d.
，]$X<=$
¨©, îï‰X
•：0-35℃,：10%-75%RH($  Y);
$%€]:“5$%、“4$%，“•$%
A4WP：Alliance for Wireless Power（qr[º»）
e.S<=iPhone 6
!，™iPhone 6 "#]ð™
PTUĂ´
。S\é$&'(ÓA4WP¶·)*X)*
，+î
ï‰
, RATTAN -.š/X)*
,Ê01~2[4Á;
PTU：Power Transmitter Unit（)*）
¢2:¤W¼ŒW@
PRU：Power Receiver Unit（）
§˜¨Š
[ÂŞ
ÂŤÂŹ
­ª®
)*
´¹¼
²¹
°¹
ÂĽjÂŻ
f.S<=)*¸6™ ñòX8ô
，j6Þ™8ê)*
\é$&'(ÓA4WP¶·)*Xcategory 1-3
,+îï‰
RATTAN -.¹/X
，é01~2[4Á。

³¹
ÂĽjÂŻ
ÂĽjÂŻ
g.ÜÝ56*9¾¿，[ Ó7ð™8:¢O¸;<，cd
B[¢$=>20þÿX?@。
‡ˆ‰Š‹SŒ=，
Œ=Ž‘’

X¹)*º|A4WP¶·)W，cdf
;~ 
RATTAN=Âť,
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : power
Create Date                     : 2015:11:02 13:58:00+08:00
Modify Date                     : 2015:11:02 13:58:00+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : A4WP說明書20151102.cdr
Creator                         : power
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:0c205e87-2046-4459-9209-b70333a6c19c
Instance ID                     : uuid:8a360481-dea7-4874-b57c-33d99b2e4453
Page Count                      : 1

EXIF Metadata provided by EXIF.tools