FrSky Electronic W2410MT 2.4G radio system User Manual
FrSky Electronic Co., Ltd. 2.4G radio system
User manual
User manaul
Product naem: 2.4G radio system
Model: W_CAN RF_Moudle
Manufacuter: FrSky Electronic Co., Ltd
Specifications
Model Name: W_CAN RF_Moudle
Dimension: 90mm*27mm*8mm
Weight: 7.7g
Working description:
1.Micro controller is taking charge of system control, such as frequency
hopping, datalink controlling, data flow controlling, and so on.
2.Digital bits are modulated to digital waveforms at 2405MHZ ISM band by
GFSK
Modulator ADF7242;
3.Main chip STM32F302 ,Two RF signals are demodulated by ADF7242.
4.Demodulator is frequency hopping, using the same mechanism as the
modulator;the signal carrier is hopping 200 times per second in common mode.
5.30 channels are selected from 2405MHZ to 2475MHz,And each time two
channelsare used for the signal carrier
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable
device .
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed
and operated with a minimum distance of 20 cm between the radiator and user body.
If the FCC identification number is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed module. This exterior label can
use wording such as the following: “Contains Transmitter Module FCC ID: XYFW2410MT Or Contains FCC ID: XYFW2410MT”
When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user
documentation that comes with the product.
Any company of the host device which install this modular with limit modular approval should perform the test of radiated
emission and spurious emission according to FCC part 15C : 15.247 and 15.209 requirement, Only if the test result comply
with FCC part 15C : 15.247 and 15.209 requirement，then the host can be sold legally.