Frederick Energy DDAC-C-PDS Magnetic Field Generator with CAM User Manual
Frederick Energy Products LLC Magnetic Field Generator with CAM
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3255337 |
| Application ID | diQWtFrrA+6fDLahx2aiYg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.42kB (1942797 bits) |
| Date Submitted | 2017-01-11 00:00:00 |
| Date Available | 2017-01-12 00:00:00 |
| Creation Date | 2017-12-20 17:31:41 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-20 17:31:41 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | Donna McIntosh |
Page |0 Exhibit 9 HIT-NOT Pro imit S stem Data Driver Assist Capable Magnetic Field Generator System (DDAC-PDS) Generator System with CAM (DDAC-PDS-C) User’s Manual v1.0 FREDERICK ENERGY PRODUCTS, LLC 1769 Jeff Road US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |1 Exhibit 9 Huntsville, AL 35806 1.800.489.6915 Table of Contents 1. O e ie ………………………………………………………………………………………………………….. 2 1.1 Theo of Ope atio ……………………………………………………………………………… 2 1.1.1 Operations Common to Standard Generators and Generators with CAMs ……………………………………………………………………………….. 1.1.2 Ope atio s U i ue to Ge e ato s ith CAMs ……………………….…. 1.2 Ope ati g F e ue 1.3 La el I fo atio …………………………………………………………………………………. 3 1.4 FCC/IC I fo atio ……………………………………………………………………….….….. 5 ….………………………………………………………………………… 3 2. Ope atio …………………………………………………………………………………………………………. 7 2.1 I stallatio I fo atio ………………………………………………………………………… 7 2.1.1 Inoperabilit Wa i g……………………………………………………………….. 7 2.2 Cha gi g……………………………………………………………………………………………….. 7 2.3 Ale ts……………………………………………………………………………………………………. 7 2.4 Mai te a e………………………………………………………………………………………… 8 2.5 Adjust e ts…………………………………………………………………………………………. 2.6 I te fe e es………………………………………………………………………………………… 8 2.7 Specificatio s………………………………………………………………………………..……….9 2.7.1 Ge e ato “pe ifi atio s ………………………………………………………….. 9 2.7.1 CAM Specifications………………………………………………………..……….…. 9 2.8 I stallatio Guide…………………………………………………………………………………..10 2.9 Safety Conside atio …………………..……………………………………………………….. 11 3. Wa a t …………………………………………………………………………………………………………. 11 4. Revision Histo ……………………………………………………………………………………………….. 14 US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |2 Exhibit 9 Overview The Magnetic Field Generator is part of a complete HIT-NOT Proximity Detection system from Frederick Energy Products which provides audible and visual warnings to both individuals and to vehicle operators to alert them that the individual has entered too close to an operating piece of equipment and action needs to be taken to avoid a collision with the equipment. The Magnetic Field Generator (MFG) attaches directly to a vehicle or piece of machinery. The HITNOT® Proximity system can include an optional, add-on Collision Avoidance Module (CAM), which is not standard on the basic system. 1.1 Theory of Operation Operations for both the standard generator (model DDAC-PDS) and a generator with optional, add-on Collision Avoidance Module (model DDAC-PDS-C) are described 1.1.1 Operations Common to Standard Generators and Generators with CAMs The functions of the Standard Magnetic Field Generator and Generator with CAM are: To generate a 73 kHz field around a vehicle or piece of machinery to act as a protection zone for collision avoidance and for proximity detection for the protection of individuals. To receive a 916.48 MHz RF signal from a Personal Alarm Device (PAD) or from a Generator equipped with CAM. The Magnetic Field Generator has an internal 73 kHz generator and a wire wrapped ferrite radiator that creates a field to serve as a cautionary zone around the vehicle or machine. When a Personal Alarm Device (PAD) is in close proximity of the Magnetic Field Generator, the PAD will detect the 73 kHz magnetic field from the generator and analyze its field strength. If the 73kHz field strength received by the PAD is above a certain threshold, indicating the distance between the Magnetic Field Generator and the PAD is close enough to signify a Warning or Danger condition, then it will reply to the Magnetic Field Generator with an 916.48 MHz transmission. The Magnetic Field Generator has its 916.48 MHz receiver on when it is transmitting the 7 kHz field a d is liste i g to e ei e a . MHz t a s issio s f o a individual equipped with a PAD (or from another MFG with CAM) to indicate the individual (or vehicle) is too close to the vehicle and warrants a warning or danger condition. If the Magnetic Field Generator receives indication that a Warning or Danger condition exists, it will turn on the appropriate indicator in a connected Warning Module (WM) or Proximity Telemetric Module (PTM) that provide alerts to the machine operator via LED and audible alarm. There also is an optional auxiliary warning module (WM-LO) that will connect to the MFG and indicate visual LED warning when alert conditions exist. This is a redundant indicator for US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |3 Exhibit 9 operator convenience and is normally located at a different location on the machine (e.g. at a point that is visible to the operator when the machine is traveling in reverse). 1.1.2 Operations Unique to Generators with CAMs The functions unique to the Generators with CAM are: (Note: these are in addition to those described in Section 1.1.1) To transmit a 916.48 MHz signal from the CAM to a Magnetic Field Generator in another vehicle. The Magnetic Field Generator with CAM performs the functions for pedestrians wearing PADs as described in Section 1.1.1. The CAM also detects magnetic fields from other vehicles with MFGs to provide warning against collision between the two vehicles. When Vehicle 1 is in close proximity of Vehicle 2, the CAM (Vehicle 1) will detect the 73 kHz magnetic field from the generator (Vehicle 2) and analyze its field strength. If the 73 kHz field strength received by the CAM (Vehicle 1) is above a certain threshold, indicating the distance between Vehicle 2 and Vehicle 1 is close enough to signify a Warning condition, the CAM will reply to the Magnetic Field Generator in Vehicle 2 with a 916.48 MHz transmission. The Magnetic Field Generator has its 916.48 MHz receiver on when it is transmitting the 73 kHz field a d is liste i g to e ei e a . MHz t a s issio s f o a Pe so al Ala De i e (PAD) or generator equipped with a CAM to indicate the individual or vehicle is too close and warrants a warning or danger condition. If the Magnetic Field Generator receives indication that a Warning or Danger condition exists, it will turn on the appropriate LED indicator on the Warning Module or Proximity Telemetric Module (PTM). Warning Module simply alerts and the PTM alerts and also records the events. 1.2 Operating Frequency The Magnetic Field Generator will transmit on a frequency of 73 kHz and receive on a frequency of 916.48 MHz. The CAM will transmit on a frequency of 916.48 MHz and receive magnetic fields on a frequency of 73 KHz. The CAM is programmed not to recognize the 73 KHz form its own Generator. 1.3 Label Information Magnetic Field Generators have two labels. One label, located on the top housing side opposite the mounting arm, provides general information. The second label, located on the rear face, provides serial number. US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |4 Exhibit 9 Standard MFG Label (Label 1) MFG with CAM Label (Label 1) If equipped with a CAM, the white dotted box in the upper right corner will o tai a la el stati g CAM I stalled . Model number for generator with CAM is DDAC-PDS-C. Model number for generator without CAM is DDAC-PDS US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |5 Exhibit 9 Serial No. Label for Standard MFG (Label 2) Serial No. Label for MFG with CAM (Label 2) 1.4 FCC/IC Information The FCC information for the Standard Magnetic Field Generator is FCC ID: QUI-DDAC-PDS and for the Magnetic Field Generator with CAM is FCC ID: QUI-DDAC-C-PDS. Both models comply with Part 15 of the FCC Rules. The ISED ID for the Standard Magnetic Field Generator is IC:11625A-DDACPDS and for the Magnetic Field Generator with CAM is IC: 11625A-DDACCPDS. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received including interference that may cause undesired operation. Any intentional or unintentional changes or modifications to the configuration of the Magnetic Field Generator not expressly approved by F ede i k E e g P odu ts LLC ould oid the use ’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is not guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |6 Exhibit 9 turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/technician for help. Conformité aux normes FCC Cet équipement a été testé trouvé conforme aux limites pour un dispositif numérique de classe B, conformément à la Partie 15 des règlements de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé conformément ment aux instructions du fabricant, peut causer des interférences nuisibles aux communications radio. Rien ne garantit cependant que l’interférences ne se produira pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou de télévision, qui peut être déterminé en comparant et en l'éteignant, l'utilisateur est encouragé à essayer de corriger les interférence par une ou plusieurs des mesures suivantes: --Réorienter ou déplacer l'antenne de réception. --Augmenter la distance entre l'équipement et le récepteur. --Branchez l'appareil dans une prise sur un circuit différent de celui auquel le récepteur est connecté. --Consulter le vendeur ou un technicien radio / expérimenté. Les changements ou modififications à cet appareil sans expressément approuvée par la partie responsable de conformité pourraient annuler l’autorité de l’utilisateur de faire fonctionner cet équipement. The required notices are specified in the RSS documents (including RSS-Gen 210) applicable to the equipment model. These notices are required to be shown in a conspicuous location in the user manual for the equipment, or to be displayed on the equipment model. If more than one notice is required, the equipment model(s) to which each notice pertains should be identified. Suppliers of radio apparatus shall provide notices and user information in both English and French. This device complies with Industry Canada license-exempt RSS-standards(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |7 Exhibit 9 Cet appareil est conforme avecx Industrie Canada exempt de licence Rss standard(s). Son fonctionnement est soumis aux deux conditions suivantes: 1 cet appareil ne peut causer d’interférence, et (2) cet appareil doit accepter toute interférence, y compris des interférences qui peuvent provoquer un fonctionnement indésirable du périphérique. Operation 2.1 Installation Information The Magnetic Field Generator is mounted on a vehicle or piece of machinery. Metal near the Magnetic Field Generator may impact performance by reducing the field size. If equipped with the optio al CAM, the Mag eti Field Ge e ato ust e i stalled a a f o a Xe o strobe light or a cab silencer. After installing the Magnetic Field Generator on the machine, performance of the unit should be verified by operation and test. 2.1.1 Inoperability Warning Magnetic fields from Magnetic Field Generators (with or without CAM) can be affected by if mounted too close to metal. The recommended guideline is to keep the Magnetic Field Generator at least 4in or 100mm away from any metal. The Magnetic Field Generator with CAM may experience erratic responses when in very close proximity to some electronic devices. Electrical devices may transmit an electrical field and noise from these fields may cause interference with the CAM’s dete tio of ag eti fields f o othe MFGs. A safe guideline is to keep the Magnetic Field Generator at least 21 inches away from any electrical/electronic device. 2.2 Charging The Magnetic Field Generator is directly powered when the ignition of the vehicle is turned on and requires no charging. 2.3 Alerts Magnetic Field Generators are designed to automatically adjust and maintain the original zone size. If the truck supply voltage changes or changes occur resulting in a reduction of zone sizes, the system will automatically adjust as much as 5% to ensure that the zones remain where they were initially set. If the processor senses a significant power reduction, the alarm may sound for a period of time. When the sounder is activated, power must be cycled to restore normal operation. If the problem persists, then service is required. The generator tolerates voltage fluctuations from 12-15V. A converter is needed for voltages greater than 18V. If the processer switch (SW) on the PCB is in the OFF position, a continuous alarm will sound at maximum sound level. If the sound level cannot be adjusted, the system US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |8 Exhibit 9 has an electronic failure and should be replaced and or serviced by qualified and authorized service personnel. 2.4 Maintenance The Magnetic Field Generator should be regularly cleaned to reduce buildup of dust and dirt. The user should check to see if the LEDs are working before using the system each day. There is a blue power-LED on the generator, visible on the generator housing. There also is an LED that indicates the alarm status of the generator and works in tandem with the warning module or PTM. 2.5 Adjustments Magnetic field size and sounder volume of the Proximity Telemetrics Module(PTM) are adjustments which can be made. To make the range adjustment (magnetic field size), remove the generator top cover and adjust the potentiometer labeled PWM adjust . This POT will increase or reduce the operating range of the generator. Place the PAD where danger zone is desired. Adjust the POT so that the boundary between the danger zone warning zone is at the PAD location. Move the POT slowly since there is a 1 second delay in moving out of a zone but no delay in entering a zone. Note that generators are shipped with the maximum field size set. Adjustments must be made by an authorized and trained person. 2.6 Interferences The Magnetic Field Generator may receive false triggering (generate alarm) signals from some RF-based devices around 916MHz including high power radios and some cell phones. Such devices will need to be moved further away from the generator. If the devices cannot be moved, then the path may need to be marked to indicate areas of interference of the system. If possible the route may need to be changed. If you have devices that also operate at 73KHz, then you need to physically separate the items as they may interfere with each other. US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending Page |9 Exhibit 9 2.7 Specifications 2.7.1 Generator Specifications (Model DDAC-PDS and DDAC-PDS-C) Part Number: Standard Generator:DDAC-PDS Generator with CAM: DDAC-PDS-C Size: 30” x 3.11” x 4.375” with Mounting Arm; 8.875” x 3.06” x 3.52” without Mounting Arm Weight: 3.8 lbs./ 1.724 kg Input Voltage: 12 VDC Magnetic Field Frequency: 73 kHz pulsing AC field. Magnetic field pulses occur approx. 3% of the time. Magnetic Field Strength: negligible Maximum Current Draw: Less than 16A. It is not a constant draw with a magnetic field pulsing at 3% of the time. Current draw between pulses is very low and the overall current draw is low. The average current is less than 0.5A. Receiver Frequency: 916.48 MHz Transmitter Frequency (Magnetic Field): 73 kHz Operating Temperature Range: -30°C to + 55°C; -22°F to 131°F Shipping Considerations: May Contain a Lithium Metal Button Cell (packed in equipment) if a real-time clock is installed. 2.7.2 CAM Specification (CAM Board Only) “ize: . Weight: 4.7oz./ 133g Input Voltage: 5 VDC Magnetic Field Frequency: none Magnetic Field Receiver Frequency: 73 kHz signal Transmitter Frequency: 916.48 MHz Transmitter Power: 0.001W (typical average power) Operating Temperature Range: -20°C to + 50°C ; -4°F to 122°F US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending P a g e | 10 Exhibit 9 US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending P a g e | 11 Exhibit 9 Ale ti g “ig als Field Adjust • • PAD (Pedestrian Alert) • Warning Zone- Series of 3 beeps • Danger Zone- Continuous signal PAD “tep “tep • • Remove bottom cover-see step 8 Have a Pedestrian with a PAD at the desired Danger Zone limit * slowly adjust the PWM pot with a 3/32 slotted screwdriver until the danger zone alerts at the desired distance. Return bottom cover. * To ensure proper functionality under all conditions the Danger Zone limit should not exceed 30’. If a larger field is required, contact Frederick Energy Products for options. Factory Field Size @ 12-15V: Warning: 43ft Danger: 30ft Talking To check the field, hold a PAD at the edge of the Danger zone on the long axis of the Generator. LOW BATTERY ON PAD: Series of 2 beeps. PAD will not indicate Alert Signals! 2.9 Safety Consideration The driver and pedestrian should not be in close proximity while the truck is in gear. The driver must turn off the truck while a pedestrian is standing next to the truck. An alternate solution is a switch applied to the emergency brake to cut the circuit to the generator while the brake is activated. Generator Warranty HIT-NOT® WARRANTY TERMS AND CONDITIONS IMPORTANT-READ CAREFULLY: BY AND INSTALLING AND USING THE HIT-NOT® SYSTEM, YOU ACKNOWLEDGE AND AGREE TO BE CONTRACTUALLY BOUND BY THESE WARRANTY TERMS AND CONDITIONS. IF ANY OF THE TERMS OF USE ARE NOT ACCEPTABLE TO YOU, DO NOT INSTALL OR USE THE HIT-NOT® SYSTEM. THE HIT-NOT® SYSTEM IS SIMPLY A TOOL TO BE USED TO ASSIST YOU IN SAFELY OPERATING HEAVY EQUIPMENT. THE HIT-NOT® SYSTEM IS NOT INTENDED AS A SUBSTITUTE FOR, NOR DOES IT REPLACE, SAFE PRACTICES IN OPERATING HEAVY EQUIPMENT. YOUR USE OF THE HIT-NOT® SYSTEM IS SOLELY AT YOUR OWN INDEPENDENT DISCRETION AND RISK. ACCEPTANCE AND DEFINITIONS. (A) Acceptance of Terms. These Warranty Terms and Conditions (these “Terms”) are a legal agreement between You, as a purchaser and end user of the System and Frederick Energy Products, LLC. RETURN THE SYSTEM TO THE DEALER FROM WHICH YOU PURCHASED THE SYSTEM, IN ACCORDANCE WITH THE DEALER’S POLICIES. This Agreement constitutes the entire and only agreement between FEP and You and supersedes all US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending P a g e | 12 Exhibit 9 prior or contemporaneous agreements, representations, warranties and understandings with respect to the System, and the subject matter of this Agreement. (B) Definitions. In this Agree e t, You a d You efe to You as the use of the “ ste . FEP e, us a d ou efe to F ede i k E e g P odu ts, LLC a d ou su esso s, pa t e s, affiliates, su sidia ies a d assig s. “ ste efe s to the Hit-Not® System purchased by You. Te s efe s, collectively, to these Warranty Terms and Conditions. LIMITED WARRANTIES; DISCLAIMER. (A) Limited Warranty. FEP hereby warrants against: (1) defects in the System, either in workmanship or material, and (2) the failure of the System to o fo to FEP’s itte spe ifi atio s, for a period of one (1) year after date of delivery to You, in each case; provided that such System has been under proper and normal use at all times during such period. All warranty claims under these Terms must be submitted through the Dealer from whi h ou pu hased the “ ste . FEP’s lia ilit is restricted to the replacement or repair of the defective or nonconforming parts alone and does not include any installation, labor, or expense involved, or other contingent liability. Liability for any components manufactured by third parties but incorporated into FEP Products to be furnished by FEP, shall be limited to the guarantee or liability to FEP of the manufacturer or supplier of such components. FEP is not liable for damages resulting from the use or misuse of the FEP Products. (B) Disclaimers. EXCEPT AS EXPRESSLY SET FORTH ABOVE: (1) NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, PROVIDED BY OR THROUGH FEP, ANY DEALER OR DISTRIBUTOR, OR ANY THIRD PARTY SHALL IMPLY THE CREATION OF ANY REPRESENTATION OR WARRANTY OF ANY KIND WHATSOEVER BY FEP; (2) THE SYSTEM IS PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS, STATUTORY OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE; (3) FEP DOES NOT REPRESENT OR WARRANT THAT THE SYSTEM WILL BE FUNCTIONAL OR DEFECT-FREE, OR THAT DEFECTS WILL BE CORRECTED; AND (4) FEP HEREBY DISCLAIMS ANY AND ALL LIABILITY OR RESPONSIBILITY FOR THE IMPROPER USE OF THE SYSTEM OR FOR THE INCORRECT OR IMPROPER INSTALLATION OF THE SYSTEM. SOME STATES OR OTHER JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS MAY NOT APPLY TO YOU. UNDER NO CIRCUMSTANCES WILL FEP BE LIABLE FOR ANY LOSS OR DAMAGE CAUSED BY YOUR USE OF THE SYSTEM. USE OF THE SYSTEM IS AT YOUR SOLE RISK. INDEMNIFICATION; RELEASE; LIMITATION OF LIABILITY. (A) Indemnification. You agree to indemnify and hold FEP, any and all parent, subsidiary, and affiliate organizations, and their respective officers, directors, agents, shareholders, members, managers, ad iso s, o sulta ts, e plo ees, su esso s a d assig s olle ti el , the P ote ted Pa ties ha less from and against all losses, costs, liabilities, e pe ses i ludi g easo a le atto e s’ fees a d expenses), claims, demands, and damages, actual and consequential, of every kind and nature, known a d u k o , suspe ted a d u suspe ted, dis losed a d u dis losed olle ti el , Losses , that a e in any way due to or arising out of Your use of the System, unless caused by the gross negligence or willful misconduct of FEP. FEP reserves the right, at Your expense, to assume the exclusive defense and control of any matter for which You are required to indemnify any of the Protected Parties, and You agree to US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending P a g e | 13 Exhibit 9 oope ate ith FEP’s defe se of su h lai s. FEP ill use easo a le effo ts to otif You of a su h claim, action, or proceeding which is subject to this indemnification upon FEP becoming aware of it. (B) Limitation of Liabilities. IN NO EVENT SHALL FEP, ITS LICENSORS, SUPPLIERS, CONTENT PROVIDERS OR THEIR RESPECTIVE PARENTS, SUBSIDIARIES, AFFILIATES, OFFICERS, DIRECTORS, SHAREHOLDERS, ADVISORS, CONSULTANTS, EMPLOYEES, SUCCESSORS OR ASSIGNS, BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES (INCLUDING BUT NOT LIMITED TO LOSS OF BUSINESS, PROFITS, USE, REVENUE OR OTHER ECONOMIC ADVANTAGE), ARISING OUT OF OR IN CONNECTION WITH THE SYSTEM OR THESE TERMS BASED ON ANY THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATION OF DAMAGES SET FORTH ABOVE IS A FUNDAMENTAL ELEMENT OF THE BASIS OF THE BARGAIN BETWEEN US AND YOU. THE SYSTEM WOULD NOT BE PROVIDED FOR SALE TO YOU WITHOUT SUCH LIMITATIONS. IN NO EVENT WILL OUR LIABILITY, OR THE LIABILITY OF OUR LICENSORS, AND OUR RESPECTIVE PARENTS, AFFILIATES, SUBSIDIARIES, OFFICERS, DIRECTORS, SHAREHOLDERS, EMPLOYEES, ADVISORS, CONSULTANTS, SUCCESSORS OR ASSIGNS, TO YOU OR ANY THIRD PARTIES IN ANY CIRCUMSTANCE EXCEED ONE HUNDRED DOLLARS (US $100.00). SOME STATES OR OTHER JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. Choice of Law; Dispute Resolution. The Agreement shall be governed by, and construed in accordance with the laws of the State of Alabama, without regard to its conflicts of law provisions. In the event of any dispute, claim, question or disagreement ( Clai et ee You a d FEP a isi g f o o elati g to Your use of the System, You and FEP will attempt, in good faith, to resolve any Claim within thirty (30) days after written notice of the Claim. Any Claim not so resolved shall be finally settled by binding arbitration administered by the American Arbitration Association under its Commercial Arbitration Rules, using the Expedited Procedures. Judgment on the award rendered by the arbitrator(s) may be entered in any court of competent jurisdiction. The arbitrator shall be an individual generally skilled in the legal and business aspects of the subject matter of this Agreement. The arbitrator shall have no authority to impose penalties or award punitive damages. The arbitration shall take place in Madison County, Alabama, and the arbitrator shall apply the law of the State of Alabama and applicable rules of evidence. If all parties and the arbitrator agree, arbitration may take place by telephone or by written communication. Unless the arbitrator otherwise directs, the parties, their representatives, other participants, and the arbitrator shall hold the existence, content, and result of the arbitration in confidence. No action, regardless of form, related to the obligations of the parties under this Agreement may be brought by either party against the other more than one (1) year after the cause of action has accrued. In any proceeding to enforce this Agreement, the prevailing party will have the right, in addition to its other rights hereunder, to recover its reasonable litigation costs and reasonable atto e s’ fees. Nothing in this Section shall preclude any party from seeking equitable relief from a court of competent jurisdiction or exercising any self-help remedies, whether before, during or after the pendency of any arbitration proceeding. The parties agree that taking any such action does not waive any right that either party has to demand arbitration at any time with respect to subsequent or amended disputes claimed or filed against a party after commencement of litigation. BY AGREEING TO THESE TERMS AND CONDITIONS, ALL PARTIES AGREE TO WAIVE ANY RIGHTS TO A JURY OR COURT TRIAL. If any provision US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending P a g e | 14 Exhibit 9 of this dispute resolution procedure is held invalid or unenforceable, the remaining provisions shall remain in full force and shall not be affected by the invalidity of any other provision. By tapping "Accept", you again agree and confirm that you have read and understood these Terms of Service and the Disclaimer. Accept V. Entire Agreement; Assignment; Miscellaneous. These Terms constitute the complete and exclusive statement of the agreement between You and us. It supersedes any and all prior or contemporaneous agreement, oral or written, and any other communications, representations, warranties and understanding relating to the subject matter hereof. If there is a conflict between an oral or written representation of any FEP employee or agent, or any Dealer or Distributor employee or agent, and these Terms, these Terms will prevail. These Terms will prevail over other rules and policies on the System. Our failure to enforce any provision of these terms shall not be deemed either a waiver of such provision or a waiver of the right to enforce such provision. If any provision of these Terms is held by an arbitrator or court of competent jurisdiction to be contrary to law, then such provision shall be construed, as nearly as possible, to reflect the intentions of the parties and the other provisions shall remain in full force and effect. The provision of these Terms which, by their terms should survive termination or expiration of these Terms, shall survive the termination or expiration hereof. FEP may assign this Agreement to any other entity of its choosing, with or without notice to You. You may not assign these Terms to any other party without the prior written consent of FEP. FEP shall not be deemed to have waived any of its rights or remedies unless such waiver is in writing and signed by FEP. No delay or omission on the part of FEP in exercising any rights or remedies shall operate as a waiver of such rights or remedies or any other rights or remedies on future occasions. The section titles in these Terms are solely used for the convenience of the parties and have no legal or contractual significance. END OF HIT-NOT® WARRANTY TERMS AND CONDITIONS Revision History Original Release. No revision history. US7,420,471; US8,169,335; US8,232,888; US5,939,986; US6,810,353; US8,446,277; US8,552,882; US8,710,979; US8,810,390; US8,847,780; US9,081,046; US9,153,118; AU2005289704; AU2008316786; AU2009228472; AU2010241545; AU2013315672; ZA2007/02919; ZA2008/02673; ZA2010/06816, ZA2010/09068; ZA2011/07178 Patent Pending
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:0e31fc41-a273-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:16 18:42:23Z Create Date : 2017:07:16 18:42:23Z Creator Tool : UnknownApplication Document ID : uuid:0e31fc41-a273-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools