Freescale Semiconductor Microcontrollers Users Manual Microcontrollers_Debugger

2015-02-09

• Introduction
  • Manual Contents
• Book I - Debugger Engine
  • Book I Contents
  • Introduction
    • Freescale Debugger
    • Debugger Application
    • Debugger Features
      • Demo Version Limitations on Components
  • Debugger Interface
    • Introduction
    • Application Programs
    • Starting the Debugger
      • Starting from within the IDE
      • Debugger Command Line Start
    • Debugger Main Window
      • Debugger Main Window Toolbar
      • Debugger Main Window Status Bar
      • Main Window Menu Bar
      • Component Menu
      • Window Menu
      • Help Menu
    • Component Associated Menus
      • Component Main Menu
      • Component Windows Object Info Bar
      • Component Context Menu
    • Highlights of the User Interface
      • Activating Services with Drag and Drop
      • To Drag and Drop an Object
      • Drag and Drop Combinations
  • Debugger Components
    • Component Introduction
      • CPU Components
      • Window Components
      • Connection Components
      • Loading Component Windows
    • General Debugger Components
      • Assembly Component
      • Command Line Component
      • Coverage Component
      • DA-C Link Component
      • Data Component
      • Memory Component
      • Module Component
      • Procedure Component
      • Profiler Component
      • Recorder Component
      • Register Component
      • Source Component
      • Terminal Component
      • Trace Component
    • Visualization Utilities
      • Inspector Component
      • Visualization Tool Component
  • Control Points
    • Introduction
    • Breakpoints
      • Breakpoints Tab
      • Multiple Selections in List Box
      • Checking Expressions
      • Saving Breakpoints
    • Setting Breakpoints
      • Positions Where a Breakpoint Is Definable
      • Temporary Breakpoints
      • Permanent Breakpoints
      • Counting Breakpoints
      • Conditional Breakpoints
      • Deleting Breakpoints
      • Associate a Command with a Breakpoint
    • Watchpoints
      • Watchpoints Tab
      • Multiple Selections
      • Checking Syntax
    • Setting Watchpoints
      • Setting a Read Watchpoint
      • Setting a Write Watchpoint
      • Defining a Read/Write Watchpoint
      • Defining a Counting Watchpoint
      • Defining a Conditional Watchpoint
      • Deleting a Watchpoint
      • Associate a Command with a Watchpoint
    • Markpoints
      • Markpoints Tab
    • Setting Markpoints
      • Setting a Source Markpoint
      • Setting a Data Markpoint
      • Setting a Memory Markpoint
      • Deleting a Markpoint
    • Halting on a Control Point
  • Real Time Kernel Awareness
    • Introduction
      • Inspecting Task State
    • Task Description Language
    • Application Example
    • Inspecting Kernel Data Structures
    • OSEK Kernel Awareness
      • OSEK Run Time Interface
      • ORTI File and Filename
      • OSEK RTK Inspector Component
  • How To...
    • How To Configure the Debugger
      • For Use from Desktop
    • Starting Debugger from CodeWarrior IDE
    • Automating Debugger Startup
    • How To Load an Application
    • How to Start an Application
    • How to Stop an Application
    • How to Step in the Application
      • On Source Level
      • Step Over a Function Call (Flat Step)
      • Step on Assembly Level
    • How to Work on Variables
      • Display Local Variable from a Function
      • Display Global Variable from a Module
      • Change Format for Variable Value Display
      • Modify a Variable Value
      • Get the Address Where a Variable is Allocated
      • Inspect Memory Starting at a Variable Location Address
      • Load an Address Register with the Address of a Variable
    • How to Work on the Register
      • Change Format of Register Display
      • Modify a Register Content
      • Start Memory Dump at Address Where Register is Pointing
    • Modify Content of Memory Address
    • How to Consult Assembler Instructions Generated by a Source Statement
    • How to View Code
    • How to Communicate with the Application
  • CodeWarrior IDE Integration
    • Debugger Configuration
  • Debugger DDE Capabilities
    • Introduction
    • DDE Implementation
  • Synchronized Debugging Through DA-C IDE
    • Configuring DA-C IDE for Freescale Tool Kit
      • Create New Project
      • Configuring The Tools
    • Debugger Interface
      • DA-C IDE and Debugger Communication
    • Synchronized Debugging
    • Troubleshooting
• Book II - HC08 Debug Connections
  • Book II Contents
  • Microcontroller Debugging First Steps
    • Technical Considerations
      • Full Chip Simulation Considerations
      • HC08 Serial Monitor Considerations
      • ICS MON08 Interface Connection
      • P&E Multilink/Cyclone Pro Considerations
      • ICS P&E Multilink/Cyclone Pro Considerations
      • SofTec HC08 Considerations
    • Debugging First Steps Using the Wizard
    • Switching Connections
      • Loading the Full Chip Simulation Connection
      • Loading the P&E Multilink/Cyclone Pro Connection
      • Loading the HC(S)08 or RS08 Open Source BDM Connection
  • HC08 Full Chip Simulation
    • Configuration Procedure
      • Select Device Option
      • Full Chip Simulation Module Commands
      • Peripheral Modules Options
      • ADC Module Option
      • ADDI Command
      • ADCLR Command
      • Clock Generation Module Option
      • XTAL Command
      • High-Resolution PWM Module
      • CYCLES Command
      • GOTOCYCLE Command
      • SHTDWN Command
      • Input/Output (I/O) Ports Module
      • INPUT<x> Command
      • INPUTS Command
      • External Interrupt Module
      • INPUTS Command
      • Keyboard Interrupt Module
      • INPUT<x> Command
      • INPUTS Command
      • Multi-Master Inter-Integrated Circuit Module
      • IICDI Command
      • IICDO
      • IICCLR
      • FCSMSCAN Controller Module
      • CANCLR Command
      • CANIN Command
      • CANOUT Command
      • FCS Programmable Timer Interrupt Module
      • FCS Serial Communications Interface Module
      • SCCLR Command
      • SCDI Command
      • SCDO Command
      • FCS Slave LIN Interface Controller Module
      • SLCCLR Command
      • SLCDI Command
      • SLCOUT Command
      • FCS Serial Peripheral Interface Module
      • SPCLR Command
      • SPDI Command
      • SPDO Command
      • SPFREQ Command
      • FCSTimer Interface Module
      • CYCLES Command
      • GOTOCYCLE Command
      • INPUT<x> Command
      • INPUTS Command
      • FCS Universal Serial Bus (USB) Module
      • USBCLR Command
      • USBIN Command
      • USBOUT Command
      • USBRESET Command
  • MON08 Interface Connection
    • Connection Procedure
      • Advanced Settings Tab
      • Target MCU Security Bytes
      • Active Mode Connection Menu Options
    • Device Class Description
  • ICS MON08 Interface Connection
    • ICS Mode
    • Connection Procedure
      • Advanced Settings Tab
      • Cycle Power Radio Button
      • Target MCU Security Bytes
      • STATUS Area
      • Active Mode Connection Menu Options
    • Device Class Description
  • HC08 P&E Multilink/Cyclone Pro Connection
    • Connection Procedure
      • Advanced Settings Tab
      • Target MCU Security Bytes
      • STATUS Area
      • Connection (MultilinkCyclonePro) Menu
      • Active Mode Menu Options
      • Debugging Limitations
      • Debugging Tips
    • Device Class Description
      • Class 5 Device
      • Class 7 Device
      • Class 8 Device
  • HC08 ICS P&E Multilink/ Cyclone Pro Connections
    • Connection Procedure
      • Advanced Settings Tab
      • Target MCU Security Bytes
      • STATUS Area
      • Active Mode Menu Options
    • Device Class Description
      • Class 5 Device
      • Class 7 Device
      • Class 8 Device
  • SofTec HC08 Connection
    • SofTec HC08 Technical Considerations
    • CodeWarrior IDE and SofTec HC08 Connection
    • Using the Stationery Wizard
    • From Within an Existing Project
      • inDart-HC08 Menu Options
      • MCU Configuration Dialog Box
      • Communication Settings Dialog Box
      • About Dialog Box
  • HC08 FSICEBASE Emulator
    • FSICEBASE Overview
      • System Requirements
      • System Features
      • System Components
    • Setting Up the FSICEBASE System
      • Setting Up the Hardware
    • Establishing Communication
      • Communication Through Ethernet Port
      • Communication Through USB Port
    • Setting Up the System
      • Specifying A Connection
      • Specifying Communication Information
      • Assigning an IP Address to FSICEBASE
    • Specifying a Memory Map
      • Specifying the Clock Speed
      • Emulation System Reset
    • Setting Up Logic Cables and Connectors
    • Bus State Analyzer (BSA)
      • Using BSA
• Book III - HCS08 Debug Connections
  • Book III Contents
  • HCS08 Full Chip Simulation
    • Configuration Procedure
      • Connection (HCS08FCS) Menu
    • Peripheral Modules Commands
      • ADC Module
      • ADDI Command
      • ADCLR
      • Clock Generation Module
      • XTAL Command
      • Inter-Integrated Circuit Module
      • IICDI Command
      • IICDO Command
      • IICCLR Command
      • Input/Output (I/O) Ports Module
      • INPUT<x> Command
      • INPUTS Command
      • External Interrupt (IRQ) Module
      • INPUTS Command
      • Keyboard Interrupt Module
      • INPUT<x> Command
      • INPUTS Command
      • Modulo Timer Interrupt Module
      • Serial Communications Interface Module
      • SCCLR Command
      • SCDI Command
      • SCDO Command
      • Serial Peripheral Interface Module
      • SPCLR Command
      • SPDI Command
      • SPDO Command
      • SPFREQ Command
      • Timer Interface Module
      • CYCLES Command
      • GOTOCYCLE Command
      • INPUT<x> Command
      • INPUTS Command
  • HCS08 P&E Multilink/ Cyclone Pro Connection
    • Connection Procedure
      • MultilinkCyclonePro Menu Description
      • Active Mode Menu Options
  • HCS08 Open Source BDM Connection
    • HCS08 Open Source BDM Technical Considerations
    • CodeWarrior IDE and HCS08 Open Source BDM Connection
    • First Steps Using the Stationery Wizard
    • First Steps From Within an Existing Project
      • HCS08 Open Source BDM Menu Options
      • HCS08 Open Source BDM Setup Dialog Box
      • Select Derivative Dialog Box
      • Information Required to Unsecure the Device
      • Show Status Dialog Box
  • HCS08 Serial Monitor Connection
    • Serial Monitor Technical Considerations
    • CodeWarrior IDE and Serial Monitor Connection
    • First Steps Using the Stationery Wizard
    • First Steps from Within an Existing Project
      • MONITOR-HCS08 Menu Options
      • Monitor Setup Window
      • Derivative Selection Dialog Box
  • SofTec HCS08 Connection
    • SofTec HCS08 Technical Considerations
    • CodeWarrior IDE and SofTec HCS08 Connection
    • First Steps Using the Stationery Wizard
    • First Steps from Within an Existing Project
      • SofTec HCS08 Menu Options
      • MCU Configuration Dialog Box
      • Communication Settings Dialog Box
      • About Dialog Box
  • HCS08 On-Chip DBG Module
    • Reference Document
    • DBG Features
    • Specific Connection Menu Options
    • Context Menu Entries in Source, Data, Assembly and Memory Windows
      • Source and Assembly Windows
      • Trigger Stored as Markpoints
      • Data and Memory Windows
      • Expert Triggers
      • Trigger Settings
      • Trigger Module Usage
    • DBG Support Status Bar Item
    • Trigger Module Settings Window
      • DBG Module Mode Setup
      • Automatic Mode (Default)
      • Expert Mode
      • Expert Mode Tab
      • Profiling and Coverage Mode
      • Disabled Mode
      • Memory Access Triggers
      • Instruction Triggers
      • Capture Triggers
      • DBG Module Options
      • Trigger Editing
      • Trigger Module Settings Window - Display Information
      • General Settings Tab
    • Trace Component Window
      • Instructions Display
      • Graphical Display
      • Textual Display
      • Column Display and Moving
      • Goto Frame
      • Clearing Frames
    • Limitations
    • HCS08 DBG V3 New Features
      • MMU and Extended Address Space
      • LOOP1 mode
      • Ability to record until Reset and from Reset
      • Expert Triggers tab extended
• Book IV - RS08 Debug Connections
  • Book IV Contents
  • RS08 Full Chip Simulation
    • Configuration Procedure
      • Connection (RS08FCS) Menu
    • Peripheral Modules Commands
  • RS08 P&E Multilink/Cyclone Pro Connection
    • Connection Procedure
      • MultilinkCyclonePro Menu Description
      • Active Mode Menu Options
  • RS08 Open Source BDM Connection
    • RS08 Open Source BDM Technical Considerations
    • CodeWarrior IDE and RS08 Open Source BDM Connection
    • First Steps Using the Stationery Wizard
    • First Steps From Within an Existing Project
      • RS08 Open Source BDM Menu Options
      • RS08 Open Source BDM Setup Dialog Box
      • Select Derivative Dialog Box
      • Show Status Dialog Box
  • SofTec RS08 Connection
    • SofTec RS08 Technical Considerations
    • CodeWarrior IDE and SofTec RS08 Connection
    • First Steps Using the Stationery Wizard
    • First Steps From Within an Existing Project
      • SofTec RS08 Menu Options
      • MCU Configuration Dialog Box
      • Communication Settings Dialog Box
      • About Dialog Box
• Book V - ColdFire® V1.0 Debug Connections
  • Book V Contents
  • ColdFire V1 Full Chip Simulation Connection
    • Full Chip Simulation Menu
    • Memory Configuration
    • Clock Frequency Setup
    • Bus Trace
    • Full Chip Simulation Warnings
    • WARNING_SETUP Command
    • MESSAGE_HIDE_ID Command
    • MESSAGE_SHOW_ID Command
    • MESSAGE_HIDE_RESET Command
    • FCS and Silicon On-Chip Peripherals Simulation
    • FCS Visualization Utilities
      • Analog Meter Component
      • IO_LED Component
      • LED Component
      • Phone Component
      • ADC/DAC Component
      • Conversion Parameters Dialog Box
      • IT_Keyboard Component
      • Interruption Keyboard Setup
      • LCD Component
      • Monitor Component
      • Push Buttons Component
      • Programmable IO_Ports Component
      • 7-Segments Display Component
      • Stimulation Component
      • Terminal Component
    • True Time I/O Stimulation
      • Stimulation Program Examples
      • Stimulation Input File Syntax
    • Electrical Signal Generators and Signals Application to Device Pins
      • Signal IO Component
      • Signal Description File EBNF
      • SETSIGNALFILE Command
      • CLOSESIGNALFILE Command
      • Base Signal Files Provided
      • Virtual Wire Connections with the Pinconn IO Component
      • CONNECT
      • DISCONNECT
      • CONNECT_STATE
      • Command Set to Apply Signal on ATD Pin
    • FCS Tutorials
      • Guess the Number
      • PWM Sample
  • ColdFire P&E Multilink/ Cyclone Pro Connection
    • P&E Multilink/Cyclone Pro Technical Considerations
    • CodeWarrior IDE and P&E Multilink/Cyclone Pro Connection
    • First Steps Using the Stationery Wizard
    • First Steps From Within an Existing Project
      • P&E Multilink/Cyclone Pro Menu Options
      • P&E Multilink/Cyclone Pro Setup Dialog Box
      • Connection Manager Dialog Box
      • Set Derivative Dialog Box
  • SofTec ColdFire Connection
    • SofTec ColdFire Technical Considerations
    • CodeWarrior IDE and SofTec ColdFire Connection
    • First Steps Using the Stationery Wizard
    • First Steps From Within an Existing Project
      • SofTec ColdFire Menu Options
      • SofTec Coldfire Setup Dialog Box
      • Target Connection Dialog Box
      • Communication Settings Dialog Box
      • Set Derivative Dialog Box
      • About Dialog Box
  • ColdFire On-Chip DBG Module
    • DBG Features
    • Context Menu Entries in Source, Data, Assembly and Memory Windows
    • Trigger Module Settings Window
      • Trigger Module Usage/DBG Module Setup
      • General Settings
• Book VI - Connection Common Features
  • Book VI Contents
  • Flash Programming
    • Non-Volatile Memory Control Utility Introduction
    • Automated Application Programming
      • Setup
      • Advanced Options: Erase Prevention
    • NVMC Graphical User Interface
      • Modules and Module States
      • NVMC Dialog Box
      • Flash Module Handling
      • MCU Speed Information
      • Configuration: FPP File Loading
      • Loading an Application in Flash
    • Hardware Considerations
      • HCS08 CPU devices
      • HCS08 CPU devices with banked/paged EEPROM
      • ColdFire CPU devices
    • NVMC Commands
      • FLASH
  • Debugging Memory Map
    • Introduction
    • The DMM GUI
      • Edition dialog and memory range edition
      • Remarks
      • CPU Core Types and Priorities
    • DMM Commands
      • Debugging Memory Map Manager command set
      • DMM command
      • DMM ADD command
      • DMM DEL command
      • DMM SAVE command
      • DMM DELETEALLMODULES command
      • DMM RELEASECACHES command
      • DMM CACHINGON command
      • DMM CACHINGOFF command
      • DMM WRITEREADBACKON command
      • DMM WRITEREADBACKOFF command
      • DMM HCS12MERHANDLINGON command
      • DMM HCS12MERHANDLINGOFF command
      • DMM OPENGUI command
      • DMM SETAHEADREADSIZE command
• Book VII - Commands
  • Book VII Contents
  • Debugger Engine Commands
    • Commands Overview
      • Available Command Lists
      • Command Syntax Terms
    • Debugger Commands
      • A
      • ACTIVATE
      • ADDXPR
      • ATTRIBUTES
      • AT
      • AUTOSIZE
      • BASE
      • BC
      • BCKCOLOR
      • BD
      • BS
      • CALL
      • CD
      • CF
      • CLOCK
      • CLOSE
      • COPYMEM
      • CMDFILE
      • CR
      • CYCLE
      • DASM
      • DB
      • DDEPROTOCOL
      • DECODE_SKIP
      • DEFINE
      • DETAILS
      • DL
      • DUMP
      • DW
      • E
      • ELSE
      • ELSEIF
      • ENDFOCUS
      • ENDFOR
      • ENDIF
      • ENDWHILE
      • EXECUTE
      • EXIT
      • FILL
      • FILTER
      • FIND
      • FINDPROC
      • FOCUS
      • FOLD
      • FONT
      • FOR
      • FPRINTF
      • FRAMES
      • G
      • GO
      • GOTO
      • GOTOIF
      • GRAPHICS
      • HELP
      • IF
      • INSPECTOROUTPUT
      • INSPECTORUPDATE
      • LF
      • LOAD
      • LOADCODE
      • LOADSYMBOLS
      • LOG
      • LS
      • MEM
      • MS
      • NB
      • NOCR
      • NOLF
      • OPEN
      • OUTPUT
      • P
      • PAUSETEST
      • PRINTF
      • PTRARRAY
      • RD
      • RECORD
      • REPEAT
      • RESET
      • RESTART
      • RETURN
      • RS
      • S
      • SAVE
      • SAVEBP
      • SET
      • SETCOLORS
      • SLAY
      • SLINE
      • SMEM
      • SMOD
      • SPC
      • SPROC
      • SREC
      • STEPINTO
      • STEPOUT
      • STEPOVER
      • STOP
      • T
      • TESTBOX
      • TUPDATE
      • UNDEF
      • UNFOLD
      • UNTIL
      • UPDATERATE
      • VER
      • WAIT
      • WB
      • WHILE
      • WL
      • WW
      • ZOOM
• Book VIII - Environment Variables
  • Book VIII Contents
  • Debugger Engine Environment Variables
    • Debugger Environment
      • The Current Directory
      • Global Initialization File (MCUTOOLS.INI - PC Only)
    • Local Configuration File (usually project.ini)
      • Default Layout Configuration (PROJECT.INI)
      • Environment Variable Paths
    • Environment Variables
      • ABSPATH: Absolute Path
      • DEFAULTDIR: Default Current Directory
      • ENVIRONMENT=: Environment File Specification
      • GENPATH: #include “File” Path
      • LIBRARYPATH: ‘include <File>’ Path
      • OBJPATH: Object File Path
      • TMP: Temporary directory
      • USELIBPATH: Using LIBPATH Environment Variable
    • Search Order for Source Files
      • In the Debugger for C Source Files (*.c, *.cpp)
      • In the Debugger for Assembly Source Files (*.dbg)
      • In the Debugger for Object Files (HILOADER)
    • Debugger Files
  • Connection-Specific Environment Variables
    • Connection-Specific Environment Variables
• Book IX - Debugger Legacy
  • Book IX Contents
  • Legacy PEDebug Target Interface
    • New P&E Connections for HC(S)08
    • “Revert to Full Chip Simulator” Feature Removed
    • Connection Selection or Change Always Available within IDE
    • Automatic Upgrade Path for Projects Previously Created
  • Legacy Target Interfaces Removed
  • HC(S)08 Full-Chip Simulator Components No Longer Supported
    • List of HC(S)08 FCS Components No Longer Supported
  • Index