Freescale Semiconductor MC33696MOD868E RF MODULE 868MHz DEVELOPER KIT User Manual USERS MANUAL
Freescale Semiconductor, Inc. RF MODULE 868MHz DEVELOPER KIT USERS MANUAL
USERS MANUAL
MC33696MODxxx Quick Start Guide Last update: February 5, 2007 MC33696MODxxx KIT Quick Start User Guide This document provides first information to use MC33696 tools. Last update: V1.1: Note for FCC Important: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: the manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. OVERVIEW MC33696MODxxx operation requires: An MC33696xxx RF Module with attached Printed antenna A DEMO9S08RG60-SP MCU board An RS232 cable A PC with RS232 port, CD player and Hyper Terminal. A 9V Battery The operation of MC33696 is done by sending with Hyper Terminal a script to the MCU board that will configure MC33696 in a defined configuration. Laurent GAUTHIER-TSPG-MCD-ARC Page 1 MC33696MODxxx Quick Start Guide Available script files: standby configuration continuous CW transmission continuous 4.8kHz OOK transmission continuous 4.8kHz FSK transmission 1 frame transmission using ID and HD 1 frame reception using ID and HD LAUNCHING THE KIT Plug the RF Module on the MCU board Connect the MCU board to the PC using the RS232 cable Launch HyperTerminal using the proper xxx.ht file according to available COM port Connect the 9V battery Screen on HyperTerminal receives status of MC33696 Registers and Pin levels SENDING A SCRIPT FILE 3.1 Configuration in Receive mode With the mouse, click on “Transfer/Send text file” Select the xxx.txt Script file corresponding to the wanted configuration For exemple :“RX OOK 433.92MHz IDHD00.txt” will configure the kit in receive mode at 433.92MHz to receive any Square modulated signal at 4800bps : 433.92MHz, OOK Receive with Data Manager ID=00h, ID length=2 bits HD=00h, HD length=1 bit Laurent GAUTHIER-TSPG-MCD-ARC Page 2 MC33696MODxxx Quick Start Guide At the end: “Receive Mode Active” indicates that the kit is waiting for data. If an RF signal is transmitted using another kit or an RF generator properly configured (433,92MHz, Pulse modulation at 4800bps), then the screen will be filled with received data: 3.2 Configuration in Transmit mode With the mouse, click on “Transfer/Send text file” Select the xxx.txt Script file corresponding to the wanted configuration For exemple :“TX OOK 433.92MHz Square 4800bps.txt” will configure the kit in Transmit mode at 433.92MHz to send a modulated signal at 4800bps. Laurent GAUTHIER-TSPG-MCD-ARC Page 3 MC33696MODxxx Quick Start Guide At the end: “Sending square wave” indicates that the kit is sending a continuous modulation Laurent GAUTHIER-TSPG-MCD-ARC Page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e36e09a9-3efd-40ce-bf0a-6910a2cf21af Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:02:05 16:55:04+01:00 Create Date : 2007:02:05 16:55:04+01:00 Document ID : uuid:1f328e13-aa3e-4f0c-b8a1-29f59e636183 Format : application/pdf Title : Microsoft Word - Freescale user guide Echo à valider.doc Creator : heyer Author : heyerEXIF Metadata provided by EXIF.tools