Frigidaire 134334000A (0403) 43340ea User Manual To The 9db80754 5dad 4c7e A35d B2a07a5c1acc
User Manual: Frigidaire 134334000A (0403) to the manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
OPERA TING INSTRUCTIONS OPERATING WASH/RINSE TEMPERATURE WARM WARM EXTRA RINSE COLD * COLD COLD COLD WASH CYCLE OPTIONS POWER SCRUB POWER SCRUB / EXTRA RINSE WARM * COLD WARM COLD GENTLE NORMAL MEDIUM SMALL SUPER RESET OFF SOAK & PREWASH WASH / SPIN SPEEDS LOAD SIZE NORMAL NORMAL EXTRA GENTLE GENTLE OFF * EXTRA RINSE KNITS/DELICATES PRECISION TEMP CONTROL 6 PULL TO START Before Operating Your Washer Read your washer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best washing results. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your washer Owner's Guide before operating this appliance. Operating Steps Read Washing Procedures in your Owner's Guide. It explains these operating steps in detail. 1. Sort laundry into loads that can be washed together. 2. Prepare items for washing. 3. Pretreat stains and heavy soil. 4. Add the measured amount of detergent to wash tub. 9. Close lid and pull cycle selector knob to start washer. 10. Remove items at end of cycle. A signal will sound at the end of the cycle when the End of Cycle Signal is turned on. Wait about 1 minute for safety lid lock to release. Cycle Selection Always follow instructions on fabric care labels. The Whites, Colors, and Knits & Delicates cycles provide a spray rinse during the first spin, followed by a deep rinse and final spin. Whites Cycle Provides up to 15 minutes of wash agitation for most fabrics. Power Spin provides 12 minutes of spin at a selected speed for maximum removal of water. This conserves energy by reducing drying time. Extra Rinse Cycle • 5. If desired, add liquid bleach to Bleach Dispenser. 6. Add laundry load to wash tub. 7. If desired, add liquid fabric softener to Fabric Softener Dispenser. 8. Set cycle selector and washer controls according to type, size, and soil level of each load. Printed in U.S.A. RINSE POWER SPIN POWER SCRUB /SOAK SPIN RINSE HAND WASH CYCLE SIGNAL ON REGULAR / WHITES 8 PREWASH GENTLE GENTLE WARM * WARM HOT COLD 15 12 • • Use Extra Rinse to remove excess dirt and detergent from heavily soiled loads. Extra Rinse provides 3 minutes of rinse agitation, then a 9 minute spin. Select Automatic Extra Rinse under Wash Cycle Options to automatically advance to Extra Rinse after the Whites cycle is completed. Select Automatic Power Scrub/Extra Rinse under Wash Cycle Options to automatically advance to Extra Rinse after the Soak & Prewash and Whites cycles are completed. PERM PRESS PREWAS H 4 8 12 PERM PRESS / COLORS PUSH TO STOP Colors Cycle Provides 12 minutes of wash agitation for light weight cottons, 8 minutes of wash agitation for items with a noiron finish or 4 minutes of wash agitation for knits. Knits & Delicates Cycle Provides 6 minutes of wash agitation for delicate items or 3 minutes of wash agitation for hand washables. Soak & Prewash Cycle Soak • Use Soak to treat heavily soiled or stained items. Soak provides 3 minutes of agitation and 12 minutes of soaking time. The load then advances into the Prewash portion of the cycle. • Use the amount of detergent recommended for a normal wash cycle. If desired, use bleach or a soaking agent for colorfast items. • The Soak water temperature is the same as the rinse water temperature selected. • Select the Agitate/Spin Speed appropriate for the items being soaked. • Select Wash Cycle Option OFF if advancing into the Whites cycle is not desired. • Follow Soak with a complete wash cycle using the normal amount of detergent. P/N 134334000A (0403) Cycle Selection (continued) Prewash • Use Prewash when soaking is not necessary. Prewash helps remove protein-based stains such as milk, grass and blood. It also helps loosen soils before washing. Prewash provides 3 minutes of wash agitation. • Use the amount of detergent recommended for a normal wash cycle. • The Prewash water temperature is the same as the wash water temperature selected. To avoid setting protein stains, select cold water. • Select the Agitate/Spin Speed appropriate for the items being prewashed. • Select Wash Cycle Option OFF if advancing into the Whites cycle is not desired. • Follow Prewash with a complete wash cycle using the normal amount of detergent. Power Scrub Option Select Power Scrub to automatically advance a load from the Soak or Prewash setting into the Whites wash and Extra Rinse cycles. 1. Add the measured amount of detergent to wash tub, then add wash load. 2. Select appropriate Wash/Rinse Temperature, Load Size, and Agitate/Spin Speed. 3. Select Power Scrub under Wash Cycle Options. • To use a cycle other than Whites after the Soak or Prewash settings, select OFF and manually advance cycle selector to cycle desired. 4. Fill fabric softener dispenser with the recommended amount of LIQUID detergent. Add water to bring liquid level to fill line on dispenser cap. • When selecting Power Scrub, the fabric softener dispenser must be filled with diluted liquid detergent at the beginning of the Soak or Prewash setting. The detergent for the Whites cycle will then be dispensed after the spin in Prewash. • DO NOT use powdered detergent in the dispenser. • Clean the fabric softener dispenser thoroughly after each use. Fabric softener and liquid detergent should not be mixed. 5. Set the cycle selector at Soak or Prewash and pull knob to start. The washer will provide Soak or Prewash as selected. It then automatically advances to the full Whites cycle and Extra Rinse cycle. If a cold rinse is selected, the washer will fill with cold water during rinse, followed by a cold spray rinse during final spin. If a warm rinse is selected, the washer will fill with cold water during rinse, followed by a warm spray rinse during final spin. The following chart suggests wash/rinse temperatures for some typical wash loads. Automatic Extra Rinse Option Select Automatic Extra Rinse or Power Scrub/Extra Rinse to provide an extra rinse at the end of the Whites cycle. Controls Always follow instructions on fabric care labels. AGITATE/SPIN SPEEDS offers three agitation speeds and four combinations of agitation and spin speeds for any cycle. The following chart suggests agitate/spin speeds for basic fabric types. Fabric Type Agitate/Spin Speed Regular Normal/Normal Perm Press Normal/Normal Knits Gentle/Normal Delicates / Washable woolens Gentle/Gentle Hand washables Extra Gentle/Gentle WASH/RINSE TEMPERATURE sets water temperatures for washing and rinsing. Select wash water temperature according to fiber content, soil level and type of detergent. A cold water rinse saves energy and reduces wrinkling. Precision Temp Control The normal temperature of warm and cold wash water can be affected by the hot water heater setting and seasonally low ground water temperatures in some geographic areas. Since detergents work best in wash water at a minimum of 65° F, select a Precision Temp to regulate the temperature of the warm and cold wash water in any cycle. Wash water in the Precision Temp Warm/Cold and Precision Temp Warm/Warm settings is regulated to approximately 90° F. and the wash water in the Precision Temp Cold/Cold setting is regulated to approximately 70° F. Rinse water temperatures are not regulated. Wash/Rinse Temperature Fabric Type Heavily soiled white/colorfast cotton, perm press Hot/Cold Lightly soiled white/colorfast cotton, perm press Warm/Cold * Noncolorfast fabrics, knits, delicates, hand washables Cold/Cold * Washable woolens Warm/Warm * * unregulated or Precision Temp Control LOAD SIZE sets the amount of wash and rinse water for the wash load. Select a water level appropriate for the load size. There should be enough water for items to move freely. • To increase water level after the wash cycle begins, turn the Load Size control to Reset and hold. When water begins to enter the tub, turn the control to the desired setting. Energy Saving Tips • Wash full loads. Oversize loads use extra energy. Undersize loads waste energy. • When small wash loads cannot be avoided, use lower water levels. • Select the appropriate cycle and time for each load. Shorten wash times for lightly soiled loads. • To reduce drying time, select a fast spin speed to remove more water from heavy items such as towels and jeans. • Use warm water to wash most loads. Limit hot water washes to heavily soiled and white loads. Use cold water for lightly soiled items and rinsing. • Operate the washer in early morning and late evening when utility demands are low. • Follow proper laundry procedures to avoid rewashing. P/N 134334000A (0403)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2004:03:04 14:18:56-05:00 Modify Date : 2004:03:04 14:18:59-05:00 Subject : 43340ea Page Count : 2 Creation Date : 2004:03:04 19:18:56Z Mod Date : 2004:03:04 19:18:56Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : willsrb1 Keywords : Metadata Date : 2004:03:04 19:18:56Z Creator : willsrb1 Title : 43340ea Description : 43340eaEXIF Metadata provided by EXIF.tools