Frigidaire CFEF355FBC User Manual ELECTRIC RANGE Manuals And Guides L0612512
FRIGIDAIRE Free Standing, Electric Manual L0612512 FRIGIDAIRE Free Standing, Electric Owner's Manual, FRIGIDAIRE Free Standing, Electric installation guides
User Manual: Frigidaire CFEF355FBC CFEF355FBC FRIGIDAIRE ELECTRIC RANGE - Manuals and Guides View the owners manual for your FRIGIDAIRE ELECTRIC RANGE #CFEF355FBC. Home:Kitchen Appliance Parts:Frigidaire Parts:Frigidaire ELECTRIC RANGE Manual
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
2
_!...2-4
.... 6-7
ce Controls
Oven
Control
Setting
Oven Controls
Visit the Frigidaire
................
..............
9
9=12
Self Cleaning
...........................
12=14
Genera{
& Cleaning
14=16
Care
Adjusting
Questions? 1-800-944-9044
(UnitedStates)
1-800-668-4606
(Canada)
Functions
............ 7-8
Oven Temperature
Before
You
Solutions
to Common
Warranty
.......
....... 17
Call
Problems
.........................
........................
Back
18
Page
Web Site at:
http://www.frigidaire.com
READ AND
SAVE
THESE
INSTRUCTIONS
p/n 316417018
rev C (0512)
Welcome&
congratulations
Congratulations on your purchase of a new range! At Electrolux Home Products,
we are very proud of our product and are completely committed to providing you
with the best service possible. Your satisfaction is our number one priority.
We know you'll enjoy your new range and Thank You for choosing our product.
We hope you consider us for future purchases.
PLEASE
CAREFULLY
READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating instructions for your model.
Use your range only as instructed in this manual. These instructions are not
meant to cover every possible condition and situation that may occur. Common
sense and caution must be practiced when installing, operating and maintaining
any appliance.
Please record your model and serial numbers
below for future reference.
Model Number:
Serial Number:
Serial plate location;
Purchase Date:
Open storage drawer (some models)
or remove outer lower panel (some models).
This Use & Care Manual contains general operating instructions for your
appliance and feature information for several models. Your range may not have
all the described features. The graphics shown are representative. The graphics
on your range may not look exactly like those shown.
Product
Registration
Be sure to register your product. The self-addressed PRODUCT
REGISTRATION CARD should be filled in completely, signed and returned to
Electrolux Home Products.
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
This symb0! wil! he!p alert you to situations that may Cause serious bodily harml death 0i pr0perty damage:
This symbol will help alert you to Situations that may Cause bodily injury or property damage
• Remove all tape and packaging before using the range.
Destroy the carton and plastic bags after unpacking the
range. Never allow children to play with packaging material.
• Proper Installation--Be
sure your appliance is properly
installed and grounded by a qualified technician
in
accordance
with the National Electrical Code ANSI/
NFPA No. 70 latest edition and local electrical code
requirements. Installonly per installationinstructionsprovided
in the literature package for this range.
Ask your dealer to recommend a qualified technician and an
authorized repair service. Know howto disconnect the power
© 2006 Electrolux Home Products, Inc.
All rights reserved.
2
to the range at the circuit breaker or fuse box in case of an
emergency.
• User servicing--Do
not repair or replace any part of the
appliance
unless specifically
recommended
in the
manuals. All other servicing should be done only by a
qualified technician. This may reduce the risk of personal
injury and damage to the range.
• Never modify or alter the construction
of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws,
or any other part of the product.
• DO NOTTOUCH SURFACE UNITS, AREAS NEAR THESE
UNITS, HEATING ELEMENTS OR INTERIOR SURFACES
OFTH E OVEN. Both surface units and oven heating elements
may be hot even though they are dark in color. Areas near
surface units may become hot enough to cause burns. During
and after use, do not touch, or let clothing orotherflammable
materials touch these areas until they have had sufficient time
to cool. Among these areas are the cook top, surfaces facing
the cook top, the oven vent openings and surfaces near these
openings, oven doorand window.
• Wear Proper Apparel--Loose=fitting or hanging garments
should never be worn while using the appliance. Do not
let clothing or other flammable materials contact hot surfaces.
• Do Not Use Water or Flour on Grease Fires--Smother
All ranges can tip.
Injury to persons could result.
• Install antFtip device packed with range.
• See Installation Instructions.
_To
reduce the risk of
tipping, the rangemust be secured by
properly installed anti-tip bracket provided
with the range. To check if the bracket is
installed properly, visually check that rear
leveling leg is inserted into and fully
secured by the anti-tip bracket by
removing lower panel or storage drawer.
For models with a warmer drawer, grasp
the top rear edge of the range and
carefully attempt to tilt it forward. Refer to
the installation instructions for proper anti_.
•
•
tip bracket installation,
J
Stepping, leaning or sitting on the doors or
drawers of this range can result in serious injuries and
also cause damage to the range. Do not allow children to
climb or play around the range. The weight of a child on an
open door may cause the range to tip, resulting in serious
burns or other injury.
Do not use the oven or warmer drawer (if
equipped) for storage.
Do not store items of interest to children
in
the cabinets above a range or on the backguard of a
range. Children climbing on the range to reach items could be
seriouslyinjured.
Never Use Your Appliance for Warming or
Heating the Room.
• Storage in or on Appliance--Flammable
materials
should not be stored in an oven, warmer drawer, near
surface units or in the storage drawer. This includes
paper, plastic and cloth items, such as cookbooks, plasticware
and towels, as well as flammable liquids. Do not store
explosives, such as aerosol cans, on or near the range.
• Do Not Leave Children Alone--Children
should not be
left alone or unattended in the area where appliance is
in use. They should never be allowed to sit or stand on any
part of the appliance.
•
•
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
When heating fat or grease, watch it closely. Fat or
grease may catch fire if allowed to become too hot.
Use Only Dry Potholders--Moist
or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholders touch hot heating elements. Do not use a towel or
other bulky cloth instead of a potholder.
Do Not Heat Unopened Food Containers--Buildup
of
pressure may cause container to burst and result in
injury.
Remove the oven door from any unused range if it is to
be stored or discarded.
IMPORTANT--Do not attempt to operate the range during
a power failure, if the power fails, always turn off the range.
If the range is not turned off and the power resumes, the range
will begin to operate again. Once the power resumes, reset the
clock and oven function.
IMPORTANT
COOKTOP
INSTRUCTIONS
FOR USING YOUR
IMPORTANT
OVEN
• Know which knob controls each surface heating unit. Place a
pan of food on the unit before turning it on, and turn the unit off
before removing the pan.
,, Use Proper Pan Size--This
appliance is equipped with one or
more surface units of different sizes. Select utensils having flat
bottoms large enough to cover the surface unit heating element.
The use of undersized utensils will expose a portion of the
heating element to direct contact and may result in ignition of
clothing. Proper relationship
of utensil to element will also
improve efficiency.
Utensil Handles Should Be Turned inward and Not Extend Over
Adjacent Surface Elements--To
reduce the risk of bums, ignition
of flammable materials, and spillage due to unintentional contact
with the utensil, the handle of the utensil should be positioned so
that it is turned inward, and does not extend over adjacent surface
units.
• Never Leave Surface Elements Unattended
at High Heat
Settings--Boilovers
cause smoking and greasy spillovers that
may ignite, or a pan that has boiled dry may melt.
• Do Not immerse or Soak Removable
Heating Elements-Heating elements should never be immersed in water. Heating
elements clean themselves during normal operation.
Glazed Cooking Utensils--Only
certain types of glass, glass/
ceramic, ceramic, earthenware, or other glazed utensils are
suitable for cook top service without breaking due to the
sudden change in temperature. Check the manufacturer's
recommendations
for cook top use.
When flaming foods under a ventilating hood, turn the fan on.
SELF CLEANING
INSTRUCTIONS
FOR USING YOUR
Use Care When Opening Oven Door or Warmer Drawer (if
equipped)--Stand
to the side of the range when opening the door
of a hot oven. Let hot air or steam escape before you remove or
replace food in the oven.
Keep Oven Vent Ducts Unobstructed.
The oven vent is located
under the left rear surface element if your model is equipped with
coil elements. The oven vent is located below the backguard for
models equipped with ceramic-glass cook tops. Touching the
surfaces in this area when the oven is operating may cause
severe burns. Also, do not place plastic or heat-sensitive items
on or near the oven vent. These items could melt or ignite.
Placement of Oven Racks. Always place oven racks in desired
location while oven is cool. If rack must be moved while oven is
hot use extreme caution. Use potholders and grasp the rack with
both hands to reposition. Do not let potholders contact the hot
heating elements in the oven. Remove all utensils from the rack
before moving.
,, Do not use the broiler pan without its insert. The broiler pan and
its insert allow dripping fat to drain and be kept away from the high
heat of the broiler.
Do not cover the broiler insert with aluminum foil. Exposed fat
and grease could ignite.
* Protective Liners--Do
not use aluminum foil to line the oven
bottom. Only use aluminum foil as recommended in this manual.
Improper installation of these liners may result in risk of electric
shock, or fire.
OVENS
Clean in the self-cleaning
cycle only the parts listed in this Use & Care Manual. Before self cleaning the oven, remove the broiler
pan and any utensils or foods from the oven.
• Do Not Use Oven Cleaners--No
commercial oven cleaner or oven liner protective coating of any kind should be used in or around
any part of the oven.
Do Not Clean Door Gasket--The
door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
,The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another
well-ventilated
room.
IMPORTANT
INSTRUCTIONS
FOR CLEANING
YOUR RANGE
Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area underneath each
surface element. Do not allow grease to accumulate.
• Kitchen cleaners and aerosols--Always
follow the manufacturer's
recommended
directions for use. Be aware that excess
residue from cleaners and aerosols may ignite causing damage and injury.
Clean Ventilating Hoods Frequently--Grease
should not be allowed to accumulate on the hood or filter. Follow manufacturer's
instructions for cleaning.
COIL COOK TOP MODELS
• Make Sure Reflector Pans or Drip Bowls Are in Place--Absence
of these pans or bowls during cooking may subject wiring or
components underneath to damage.
Protective Liners--Do
not use aluminum foil to line surface unit drip bowls, or reflector pans. Only use aluminum foil as recommended
in this manual. Improper installation of these liners may result in risk of electric shock, or fire. Improper installation of these liners
may result in risk of electric shock, or fire.
Important
Safety
Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
Your Electric
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Range Features
Include:
Electronic Oven Control with Kitchen Timer.
Left Front Single Element Control.
Left Rear Single Element Control.
Right Rear Single Element Control.
Right Front Single Element Control.
Element ON Indicator Light(s).
Oven Interior Light Switch (some models).
Oven Interior Light with removable Cover (some models).
Automatic Oven Door Light Switch (some models).
Speed BakeTMSwitch & Indicator light (some models).
Speed Bake TMOven Fan & Fan Cover (some models).
Self-Cleaning Oven interior.
Self-Clean Door Latch.
Adjustable Interior Oven Rack(s).
Large 1 piece Oven Door Handle.
Full width Oven Door (styles vary by model).
Storage Drawer with Integrated Handle (some models) or cover
panel (some models).
Easy to clean upswept Cooktop.
Coil Element Cooktop
6" Single Element(s).
8" Single Element(s).
Removable Element Drip Bowls (some models).
Broil Pan (some models).
Broil Pan Insert (some models).
Leveling Legs and Anti-tip Bracket (included).
@
_::
T
T
_
NOTE: The features of your range may vary
according to model type & color.
®
i
i
:(::_:_¸
Oven
OVEN VENT LOCATED
UNDER LEFT REAR ELEMENT
Vent
The oven vent is located under the left rear surface element (See
Fig. 1). When the oven is on, warm air passes through the vent. This
venting is necessary for proper air circulation in the oven and good
baking results. DO NOT BLOCK OVEN VENT.
Removing
Oven Racks
ALWAYS ARRANGE
& Replacing
Oven Racks
To remove, pull the rack forward until itstops. Lift up front of rack and slide
out. To replace, fit the rack onto the guides on the oven walls. Tilt the front
of the rack upward and slide the rack back into place.
Fig. 1
Arranging
Location
& Roasting
Shelf
OVEN RACKS WHEN THE OVEN IS COOL
(PRIOR TO OPERATING
using the oven.
THE OVEN). Always use oven mitts when
Recommended Rack Positions for Broiling,
Food
Broiling hamburgers & steaks
Broiling meats, chicken or fish
Cookies, cakes, pies, biscuits
& Muffins
Frozen pies, angel food cake,
yeast, bread, casseroles, small
cuts of meat or poultry
Turkey, roast or ham (some models)
Baking & Roasting:
Rack Position
See Broil section
See Broil section
3 or 4
Roasting Shelf
positioned incorrectly
Fig. 3
1
1 or Roasting Shelf
Correct Roasting
Shelf position
Fig. 4
Fig. 2
Types of Oven Racks
& Roasting
Shelf
Your range may be equipped with one or more of
the oven rack types shown; Fiat Rack (Fig. 5)
and Roasting Shelf (Fig. 6; some models). To
maximize cooking space the Roasting Shelf
should be used in the lowest rack position to
roast large cuts of meat & poultry (See Fig. 2).
Be sure the Roasting Shelf is level & the front end
of the shelf rests over the front ends of the oven
rack glides on both sides of the oven interior (See
Figs. 3 & 4)
Oven Rack
Fig. 5
Shelf
Fig. 6
Baking
Layer Cakes with 1 or 2 Oven Racks
For best results when baking cakes using 2 oven racks, place cookware on rack positions 1 & 4 (See Fig. 7). For best results
when using a single oven Flat Rack, place cookware on rack position 3 (See Fig. 8).
Air Circulation
in the Oven
For best air circulation and baking
results allow 2-4" (5-10 cm) around
the cookwa re for proper ai r circulation
and be sure pans and cookware do not
touch each other, the oven door, sides
or back of the oven cavity. The hot air
must be able to circulate around the
pans and cookware in the oven for
even heat to reach around the food.
Fig. 7
Fig. 8
Before
Setting
Oven
Element
Controls
On
Fig. 1
(cont'd)
ELEMENT
ON indicator
Light
Your range is equipped with a surface control indicator lights that will glow on your
range--the ELEMENTON indicatorlight (See Fig. 1).
The ELEMENT ON located on the control panel and will glow when a surface
element is turned ON. A quick glance at this indicator light after cooking is an
easy check to be sure ALL surface controls are turned OFF.
Cookware
Material
Types
The cookware material determines how evenly & quickly heat is transferred from the surface element to the pan bottom.
The most popular materials available are:
ALUMINUM- Excellent heat conductor. Some types of food
will cause it to darken (Anodized aluminum cookware resists
staining & pitting), if aluminum pans slide across the ceramic
cooktop, they may leave metal marks which will resemble
scratches. Remove these marks immediately.
COPPER - Excellent heat conductor but discolors easily.
May leave metal marks on ceramic glass (see Aluminum).
STAINLESS STEEL- Slow heat conductor with uneven
cooking results. Is durable, easy to clean & resists
staining.
Using
CAST IRON - A poor heat conductor however will retain
heat very well. Cooks evenly once cooking temperature is
reached. Not recommended for use on ceramic cooktops.
PORCELAIN-ENAMEL on METAL- Heating
characteristics will vary depending on base material.
Porcelain-enamel coating must be smooth to avoid
scratching ceramic cooktops.
GLASS- Slow heat conductor. Not recommended for
ceramic cooktop surfaces because it may scratch the
glass.
proper cookware
The size and type of cookware used will influence the setting
needed for best cooking results. Cookware should have flat
bottoms that make good contact with the entire surface
heating element (See Fig. 3). Check for flatness by rotating a
ruler across the bottom of the cookware (See Fig. 2).
Fig. 2
CORRECT
INCORRECT
m
W
w
• Curved and warped
bottoms.
Be sure to follow the
• Flat bottom
sides.
recommendations for using
propercookware as
illustrated in Figs. 2 & 3.
For more information about
the ceramic cooktop see
Ceoktop Cleaning &
Maintenance in the
General Care & Cleaning
section.
® Tight fitting lids,
pan
and straight
e Weight of handle does not
tilt pan. Pan is well
balanced.
e Pan sizes match the
amount of food to be
prepared and the size of
the surface element,
• Pan overhangs element by
more than one-half inch.
® Made of a material that
conducts heat well.
• Pan is smaller
element.
w
than
• Easy to clean,
• Always match pot diameter
to surface element
diameter.
® Heavy handle tilts pan.
Fig. 3
Setting
Surface Controls
Operating
the Surface
Element
(cont'd)
Elements
(all models)
To Operate
the Surface
Elements:
1. Place cooking utensil on the surface element.
On
OFF
Io
2.
hi
sirn
2
8
7
4
reed
Left
Rear
OO
OO
3.
Push in and turn the surface control knob either direction to the desired
setting. Start most cooking operations on a higher setting and then turn to
a lower setting to finish cooking. The control knobs do not have to be set
exactly on a particular setting. Use the settings as a guide and adjust the
control knob as needed.
When cooking is completed, turn the surface element OFF before removing
the pan. Note: The surface "ELEMENT ON" indicator light(s) will glow
when one or more elements are turned on. A quick glance at these
indicator light(s) when cooking is finished is an easy check to be sure all
surface elements are turned off. See chart below for recommended control
settings for different types of foods.
The suggested settings found in the table below are based on cooking in medium-weight aluminum pans with lids. Settings may
vary when using other types of pans.
STANDARD SETTING FOR SURFACE ELEMENTS
Setting
_Typeof Cooking
HiGH (Hi-9)
Start most foods, bring water to a boil, pan broiling
MEDIUM HIGH (7-8)
Continue a rapid boil, fry, deep fat fry
MEDIUM (5- 6)
Maintain a slow boil, thicken sauces and gravies, steam vegetables
MEDIUM LOW (2- 4)
Keep foods cooking, poach, stew
LOW (LO- 1)
Keep warm, melt, simmer
SIMMER SELECTSURFACE
ELEMENT
Max. Simmer (4)
Larger quantities of food, stews and soups
Min. Simmer (LO)
Smaller quanitites of food, delicate foods, melting chocolate or butter
Note:Thetimeofdaymustfirstbesetinordertooperatetheoven.
READTHEINSTRUCTIONS
CAREFULLY
BEFORE
USING
THEOVEN.Forsatisfactory
useofyouroven,become
familiarwith
thevariouspadfunctions
oftheovenasdescribed
below.
BAKETIME
PAD-- Used to
FEATURE INDICATOR
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time
of day, clean time and minute timer.
enter the length of
the baking time.
LIGHTS--
These light to show which feature
is in use.
BAKE PAD--Used
to select the bake
function.
to set the time of day.
BROIL PAD-Q
•
•
i
CLOCK PAD-- Used _
TIMER ON/OFF
PAD-- Used to set or
cancel the minute
timer. The minute timer
•
•
/
_function.
® Oven
Cleaning cycle. A 2 or 3
hour Self-Clean time may
be selected.
START TIME PAD-- Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.
OVEN, PREHEAT 8, DOOR LOCKED LIGHTS*--The
"OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the SelfClean cycle or the oven door lockout is activated.
*Note: The OVEN indicator light on the electronic display
will turn ON & OFF when using the Bake feature & during
preheat.This is normal & indicates that the 0yen is cycling
to maintain the selected baking temperature, When the
preheat indicator !ight turns OFF, your oven is ready,
control
panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold _'_.
After 7 seconds,
again for 7 seconds until the control beeps
CLEAR/OFF
PAD--
Used to clear
any function previously entered
except the time of day and minute
timer. Press CLEAR/OFF to stop
cooking. Also the CLEAR/OFF
pad
is used to activate oven door lockout
setting.
Temperature
conversion
The electronic oven control is set to oP eratein °F
(Fahrenheit) when shipped from the factory. The oven can be
programmed for anytemperature from 170°F to 550°F (77°C
t°287°C)
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
"----"
appears in the display.
1.
Press _.
2.
Press and hold the /_
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @
broil
SELF-CLEAN PAD-Used to select the Self-
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous Bake
feature.
For a silent
Used to
select the variable
until "Hr' appears in the
display.
3.
Press and hold _
until °F or °C appears in the
display.
once.
SettJ.g
4.
Press the ,_
or V
to change °F to °C or °Cto °F.
5.
Press any control pad to return to normal operating
mode.
Co.t o!
Note" oven,
The time of day must first be set in order to operate the
NOTE: To turn the time of day display OFFor ON in the display piess _
lm
.
_
and h0!d {or 15 second s (the control will beep
once) and then release. This feature does not remove the set time Ofday from the memory of the control. When the display
is tuined 0FE the time 0f day Wi!! ieiappeai f0i a few sec0_ds any time the @
pad is touched:
Setting
Oven Controls
(cont'd)
the ,/_ or V,
To Set the Clock
in 5°F increments (1 °C if the control is set to display
Celsius).
When the range is first plugged in or when the power supply
to the appliance has been interrupted, the display will flash
"12:00".
t.
Press (_
2.
Within 5 seconds press & hold the /_
3.
until the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
To Set the
Minute
1.
Press_.
2.
Press the /_
As soon as the/_
or V
pad is released, the oven will
begin heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF &
the control will beep 3 times.
once (do not hold pad down).
or V
the temperature can then be adjusted
4.
To cancel baking, press _).
To Change the Oven Temperature
Started:
Timer:
1.
Press _
after Baking has
and make sure the bake temperature is
displayed.
to increase the time in one minute
2.
increments. Press & hold the /_ to increase the time
3.
4.
To Set Control
Hour
pad is pressed first, the timer will
Energy
for Continuous
Bake or 12
Saving
To set control for continuous baking:
1.
Press & hold _'_
2.
heard, "---hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
To cancel the Continuous Bake function, press & hold
until _'.,"_ is pressed.
pad will
glow while the minute timer is active.The minute timer does
not start or stop cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The
minute timer can be used alone or during any of the other
oven functions. When the minute timer is in use with any
other function, the minute timer will be shown in the display.
To view other functions, press the pad for that function.
down for 5 seconds until tone is
for 5 seconds until a tone is heard. "12hr" will
appear in display indicating that the control has
returned to the 12 Hour Energy Saving feature.
Oven
Lockout
8
Lock
The control can be programmed to lock the oven door &
lockout the oven control pads.
To set Control for Oven Lockout feature:
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press &
hold the /_, or V
pad to increase or decrease the
The oven control has a built-in 12 Hour Energy Saving
feature that will shut OFF the oven if the control is left ON
for more than 11 hours & 59 minutes. The oven can be
programmed to override this feature for continuous baking.
advance to 11 hours & 59 minutes.
The display shows the timer countdown in minutes until
1 minute remains. Then the display will countdown in
seconds.
When the set time has run out, the timer will beep 3
times & will continue to beep 3 times every 60 seconds
NOTE: The indicator light located above the_
or V
settemperature.
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours & 59 minutes.
Note: If the V
Press the A
to increase or decrease the time.
1.
Press _
and hold for 3 seconds. "Loc" will appear in
v
display, the "Door Locked" indicator light will flash & the
motor driven door lock will begin to close automatically.
DO NOT open the oven door while the indicator light
is flashing. Allow about 15 seconds for the oven door to
lock. Once the oven door is locked, the current time of
day will appear in the display.
To Cancel the Minute Timer before the set time has
run out: Press @.
To Set or Change the Temperature
for Baking
The oven can be programmed to bake at any temperature
from t 70°F to 550°F (77°C to 287°C).
To Set the Controls
1.
2.
Press _.
"
2.
for 3 seconds. The control will unlock the oven door &
resume normal operation.
for Baking:
" appears in the display.
Within 5 seconds, press the /_
or V.
Note: If any Control pad is pressed while in the Oven
Lockout mode, Loc will appear in the display untiJ
the control pad is released.
The display
will show "350°F (177°C)." By pressing & holding
To cancel the Oven Lockout feature, press _;_ & hold
10
Setting
Oven Controls
(cont'd)
To Set Timed Bake with Delay Start
The _,_
BAKE TIME and _'_
START TIME pads operate
the features that wiii turn the oven ON & OFF at the times
To Change the Oven Temperature or Bake Time after
Baking has Started:
1. Press the function pad you want to change.
2.
you select in advance. The oven may be programmed to
start immediately & shut off automatically (Timed Bake) or
to begin baking at a later time with a delayed start time.
To Program the Oven to Begin Baking Immediately &
to Shut Off Automatically
(Timed Bake):
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3.
Press (_.
4.
Within 5 seconds, press the/_,
'....
The display wiii
show "350°F (177°C). '' By holding the ,1_ or V,
the
temperature can then be adjusted in 5°F increments
(1 °C if the control is set to display Celsius).
5.
Press @.
"0:00" wiii flash in the display (HR:MIN).
or V
6.
Press the /_
7.
appears in the display.
The oven will turn ON & begin heating.
To
Off
1.
2.
Program Oven for a Delayed Start Time & to ShutAutomatically
(Delayed Timed Bake):
Be sure that the clock shows the correct time of day.
Place the food in the oven.
3.
Press (_.
4.
Within 5 seconds, press the/_
'....
until the desired baking time
appears in the display.
or V.
The display
wiii show "350°F (177°C)." By holding the/_,
Press @.
6.
Press the/_k or V
"0:00" wiii flash in the display (HR:MIN).
until the desired baking time
appears.
7.
Press _.
The earliest possible start time wiii appear
in the display.
8.
Press the/_
or V
until the desired start time appears
in the display.
Once the controls are set, the control calculates the
time when baking will stop in order to start at the time
you have set.
10. The oven will turn ON at the delayed start time and
begin heating.
9.
NOTE:During Timed Bake the preheat !ndicator light
will not function.
Use caution with the Timed Bake & Delayed
Start (Delayed Timed Bake) features. Foods that can easily
spoil such as milk, eggs, fish, meat or poultry, should be
chilled in the refrigerator first. Even when chilled, they
should not stand in the oven for more than 1 hour before
Speed
b.
How Speed
pressed.
TM
Cooking
System
(some models)
Bake
TM
Cooking
System
works
The Speed Bake TM Cooking System uses a fan to
circulate the oven's heat uniformly and continuously around
the oven (See Fig. 1). This improved heat distribution allows
for fast, even cooking & browning results. It also gives better
baking results when using 2 racks at the same time.
Heated airflows around the food from all sides, sealing in
juices & flavors. Meats cooked with Speed Bake TM
Cooking System are juicer. Poultry is crisp on the outside
while staying tender & moist on the inside. Breads & pastry
brown more evenly. Most foods baked in a standard oven
can be cooked faster & more evenly with the Speed
Bake TM Cooking System.
Speed
Bake TM Cooking
Instructions:
For Baking:
1. For optimum cooking results it is recommended to
preheat the oven when baking foods such as cookies,
biscuits & breads.
2. Reduce oven temperature 25 ° F from recipe's
recommended oven temperature. Followthe remainder
of the recipe's instructions using the minimum
recommended cook time.
3. When using 2 oven racks at the same time, place in
positions 2 & 5 for best results (See Fig. 2).
Note: Layer cakes will have better results using the normal
Bake featu re.
"END" will appear in the display window and the oven
will shut-off automatically.
The control will beep 3 times every 60 seconds until
_is
Bake
Benefits of Speed Bake TM Cooking System:
-- Foods cook up to 25 to 30% faster, saving time & energy.
-- Multiple rack baking.
-- No special pans or bakeware needed.
When the Set Bake Time Runs Out:
a.
to adjust the setting.
or V,
the temperature can then be adjusted in 5°F increments
(1 °C if the control is set to display Celsius).
5.
or v
cooking begins & should be removed promptly when
cooking is completed.
appears in the display.
or V.
Pressthe/_
11
Setting Oven Controls
(cont'd)
For Roasting:
1. Preheating is not necessary when roasting foods with
Speed Bake TM Cooking System.
2. Since Speed Bake cooks food faster, reduce the cook
time by 25% from the recommended cook time of your
recipe. Increase the time until the desired doneness is
obtained.
6.
7.
Note: Cook time reductions will vary depending on the
amount and type of food being cooked.
To Set Speed
1.
2.
3.
Bake
TM
Cooking
8.
System:
Program the oven as you normally would to bake. Speed
Bake may be used with Bake, Timed Bake and Delayed
Time Bake features.
Press and release Speed Bake switch. The indicatoriight
located above the Speed Bake switch will glow and the fan
will come on. The fan stays on when the oven door isclosed
and shuts off while the oven door is opened. The fan will
continue to operate until cooking is complete.
To cancel Speed Bake, press @
place the food on the insert.
Place the broiler pan & insert on the oven rack (some
models). Open the oven door to the broil stop
position when broiling (See Fig 1).
Broil on one side until food is browned. Turn & broil food
on 2nd side.
Note: Always pull the oven rack out to the stop position
befo re tu ruing o r removing the food.
When broiling is finished press _.
Broil Oven Rack Position Table (Refer to Fig. 2)
Position
6
5
4
Food category
Medium-rare steaks/medium-well hamburgers
Fish, medium steaks & pork chops
Well-done foods such as chicken & lobster
The broiler pan & the insert (some models) allows grease to
drain & be kept away from the high heat of the broiler. DO
NOT use the pan without the insert. DO NOT cover the
insert with foil; the exposed grease could ignite. DO NOT
use the broil pan without the insert or cover the insert with
aluminum foil. The exposed fat could ignite.
on the oven control as
you would to stop any baking function.
NOTE: The Speed Bake feature will not work during a SelfCleaning cycle.
Broiling
1.
Arrange the oven rack while oven is still cool. Position
the oven rack as suggested in the Broil Oven Rack
Position Table.
2.
Press _.
3.
Press & hold the /_ or v
"----"
will appear in display.
until the desired broil
setting level appears in the display. Press the _k for Hi
broil or the V
4.
5.
for LO broil. Most foods may be broiled
To insure
at the Hi broil setting. Select the LO broil setting to
avoid excess browning or drying of foods that should be
cooked to the well-done stage.
For optimum browning, preheat broil element for 3
or 4 minutes before adding food.
Place the insert on the broil pan (some models), then
proper results when
broiling use ONLY
Electrolux Home
Products, Inc. approved
Broil Pan & Insert (some
models).
Should an oven
fire occur, close the oven door
and turn the oven OFF. If the
fire continues, use a fire
extinguisher. DO NOT put
water or flour on the fire. Flour
may be explosive.
Self-Cleaning
DO NOT line the oven walls, racks, oven
During the Self-Cleaning cycle, the outside of
the range can become very hot to the touch. DO NOT leave
small children unattended near the appliance.
bottom or any other part of the range with aluminum foil.
Doing so will destroy heat distribution, produce poor baking
results and cause permanent damage to the oven interior
(aluminum foil will melt to the interior surface of the oven).
The health of some birds is extremely
sensitive to the fumes given off during the Self-Cleaning
cycle of any range. Move birds to another well-ventilated
room.
DO NOT force the oven door open. This can
damage the automatic door locking system. Use caution
when opening the door after the Self-Cleaning cycle is
completed. The oven may still be VERY HOT.
12
Self-Cleaning
Preparing
(cont'd)
for a Self=Clean
Cycle
A Self-Cleaning oven cleans itself with high temperatures
(well above cooking temperatures) which eliminate soils
completely or reduces them to a fine powdered ash you can
wipe away with a damp cloth.
using your hand from the front of the bake element. This will
allow easier access to the oven bottom for cleaning.
Remove the bottom oven rack before raising the element. Be
careful not to raise the element more than 4 or 5 inches
from the resting position.
Adhere to the following cleaning precautions:
• DO NOT use oven cleaners or oven protective coatings in
or around any part of the Self-Cleaning oven.
• DO NOT clean the oven door gasket. The woven material
of the oven door gasket is essential for a good seal. Care
should be taken not to rub, damage or remove the
gasket.
• DO NOT use any cleaning materials on the oven door
gasket. Doing so could cause damage.
• Remove the broiler pan & insert (some models), all
utensils & ANY aluminum foil. These items cannot
withstand high cleaning temperatures.
= Remove racks. See "Removing & Replacing Oven Racks"
under Before Betting Oven Controls. If they are not
removed during the Self-Clean cycle their color will turn
slightly blue and the finish will be dull. After the cycle is
complete and the oven has cooled, rub the sides of the
oven racks with wax paper or a cloth containing a small
amount of salad oil (this will make the racks glide easier
into the rack position).
• Remove any excessive spiJJovers in the oven cavity
before starting the Self-Cleaning cycle. To clean, use
hot, soapy water and a cloth. Large spillovers can cause
heavy smoke or fire when subjected to high temperatures.
DO NOT allow food spills with a high sugar or acid
content (such as milk, tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the surface as they may leave a
dull spot even after cleaning.
• Hand clean any soil from the oven frame, the door liner
outside the oven door gasket and the small area at the
front center of the oven bottom. These areas heat
sufficiently to burn soil on. Clean with soap & water.
• Prior to setting the Self-Clean cycle, any spills remaining
on the oven bottom should be removed.
The baking element
may be tilted about
4 or 5 inches to
clean the oven
bottom.
The oven bake & broil elements may appear
to have cooled after they have been turned OFF. The
elements may still be hot and burns may occur if these
elements are touched before they have cooled sufficiently.
Starting
the Self-Clean
Cycle
or a Delayed
Start Self=Clean
Cycle
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils or a 3 hour cycle for heavier soils. NOTE: The
kitchen area should be well ventilated using an open
window, ventitlation fan or exhaust hood during the t st SelfClean cycle. This will help eliminate the normal odors
associated with the t st Self-Clean cycle.
To Set the Controls for a Self-Clean
Delayed Start Self=Clean Cycle:
Cycle
or a
(Note: if you do not want to start a Delayed Self-Clean
Cycle, skips steps 2 & 3.)
t. Be sure the clock shows the correct time of day.
2.
Press @.
3.
Press and hold the,/_
The " : " in the time of day will flash.
pad to scroll to the time to start
the delayed Self-Clean cycle. Release the pad when the
desired time is displayed.
4.
Press _.
5.
Press the ,/_ or V
"
" appears in the display.
once. "3:00" appears in the display
for a 3 hour cycle. To change to a 2 hour cycle
press V.
6.
"2:00" appears in the display.
As soon as the controls are set, the motor driven lock
will begin to close automatically and the "LOCK"
indicator light will flash. DO NOT open the oven door
while the light is flashing (it takes about 15 seconds for
the oven door to lock).
"CLn" will appear in the display during the Self-Clean
cycle and the "LOCK" light will glow until the SelfCleaning cycle is complete or cancelled and the oven
temperatu re has cooled.
When the Self=Clean Cycle has Completed:
1. The time of day or "End" will appear in the display
window and the "Clean" and "LOCK" light will continue
to glow.
2. Oncetheovenhascooleddownforaboutl
HOURand
the "LOCK" light has gone out, the oven door can be
opened.
3. If "End" is in the display and the Clean indicator light
remains ON, press _;,_. The time of day will appear in
the display.
The Bake element is located in the lower oven cavity (See
illustration).The bake element is designed to be tilted up
NOTE: When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
13
Self-Cleaning
Stopping
(co nt'd)
or interrupting
If it becomes
necessary
a Self-Cleaning
Cycle
To avoid possible bums use care when opening
the oven door after the Self-Cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or steam to
escape.
to stop or interrupt a Self-Cleaning
cycle:
1.
Press
2.
Oncetheovenhascooleddownforaboutl
3.
_.
DO NOT force the oven door open. This can
damage the automatic door locking system. Use caution &
avoid possible burns when opening the door after the SelfCleaning cycle has completed. The oven may still be VERY
HOT.
HOURand
the "LOCK" light has gone out, the oven door can be
opened.
Restart the Self-Clean cycle once all conditions have
been corrected.
General
Care &Cleaning
Surfaces
How to Clean
Glass,
Plastic
Control
For general cleaning, use a soft cloth, clean with mild dish detergent & water or a 50/50 solution
of vinegar & water. Follow by rinsing the area with clean water; dry & polish with a soft cloth.
Glass cleaners may be used if sprayed on a soft cloth 1st. DO NOT spray liquids directly on the
control pad and display areas. DO NOT use large amounts of water on the control panel - excess
water on the control area may cause damage to the appliance. DO NOT use other liquid
cleaners, abrasive cleaners, scouring pads, or some paper towels - they will damage the finish.
Painted
Body Parts &
Knobs
Painted
Control
Panels
areas
& Display
Porcelain
Enamel
BurRer Grates,
Cooktop
Surface,
Below
Cooktop,
Broiler Pan & Insert,
Broiler
Drawer,
Door
Liner & Oven Bottom
Before cleaning the control panel, turn all controls to OFF & remove the control knobs. To
remove, pull each knob straight off the shaft. Use the general cleaning instructions provided
paragraph above.
in the
Clean burner grates, broiler pan & insert in the dishwasher and dry upon removal. If soils are not
removed, follow the cooktop cleaning instructionsbelow.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of
clean water & ammonia. If necessary, cover difficult spots with an ammonia-soaked
paper towel
for 30 to 40 minutes. Rinse with clean water and a damp cloth, then scrub with a soap-filled
scouring pad. Rinse & wipe dry with a clean cloth. Remove all cleaners or the porcelain may
become damaged during future heating. DO NOT use spray oven cleaners on the range top.
Oven Racks
Remove racks. See "Removing & Replacing Oven Racks" under Before Setting Oven Controls.
Use a mild, abrasive cleaner, following the cleaner's recommendations.
Rinse with clean water &
let dry. After cleaning the racks, rub the sides of the racks with wax paper or a cloth containing a
small amount of baby oil or salad oil (this will make the racks glide easier into the oven rack
positions).
Over
Use soap & water to thoroughly clean the top, sides & front of the oven door. Rinse well. You
may use a glass cleaner on the outside glass of the oven door. DO NOT immerse the door in
water. DO NOT spray or allow water or the glass cleaner to enter the door vents. DO NOT
use oven cleaners, cleaning powders or any harsh abrasive cleaning materials on the outside of
the oven door. DO NOT clean the oven door gasket. The oven door gasket is made of a woven
material, on Self-Cleaning
models, which is essential for a good seal. Care should be taken not
to rub, damage or remove this gasket.
Door
Stainless
Steel
Clean stainless
steel with hot soapy water & a dishcloth. Rinse with clean water and a cloth.
DO NOT use cleaners with high conecentrafions
of chlorides or chlorines. DO NOT use harsh
scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning stainless
steel. Always be sure to rinse the cleaners form the surface as bluish stains may occur during
heating that cannot be removed.
14
General
Care
& Cleaning_
(cont'd)
Surface
Elements
and Drip Bowls
Surface elements can be unplugged and removed to make
cleaning the drip pans easier. The surface elements clean
themselves when they are turned on. Food spilled on a hot
element will burn off. Food spilled on a cool element may be
cleaned with a damp cloth--any remaining soil will burn off
the next time the element is used.
Hold the surface element and drip bowl together as level as
possible and firmly push the terminal end into the terminal
plug. Make sure element terminal is seated properly into
terminal plug. Make sure the surface element is level to
reduce the hazard of pans sliding off the element.
To Raise the Top for Cleaning
1. Grasp the sides and lift from the front. Lift-up rods will
support the top in a raised position. Only lift the top far
enough to allow the support rods to snap into place.
2.
Clean underneath using a clean cloth and hot, soapy
water.
3. To lower the top, gently push back on each rod to release
the notched support. Hold the range top and slide the lift
rods down into the range frame.
4.
Never immerse a surface element in water.
f_lement
Hold
Down
/
Support
Cllp
(if equipped)
\
AHow
Element
On drip pan
inside
rim.
Q
Terminal
End
Terminal
Plug
Be sure the range is cool before removing
elements or drip bowls. Be careful not to bend terminal ends
when replacing elements after cleaning.
To Remove the Surface Elements
1.
2.
and Drip Bowls
Lift the edge of the drip bowl across from the terminal end.
Lift the surface element and drip bowl together just
enough to clear the cooktop.
While holding the drip bowl and surface element, gently
pull the terminal end out from the terminal plug. if equipped,
DO NOT remove the hold down clip from the drip bowl.
To Clean Drip Bowls
Wash in hot, soapy water or in the dishwasher. Rinse and dry
while still warm. Hard to remove, burned on soil can be removed
by soaking the drip bowls for about 20 minutes in a lightly
diluted liquid cleanser or a solution of ammonia and water (1/
2 cup ammonia to 1 gallon of water). A nylon scrubber may be
used after soaking. DO NOT use abrasive cleaners or steel
wool, as they will scratch the surface. Always rinse with clean
water and polish dry with a soft cloth.
To Replace Drip Bowls and Surface Elements
1. Slide the terminal end on the element through the opening
in the drip bowl.
2. Align the element support to rest on the rim inside the drip
bowl. If your drip bowl is equipped with a hold down clip,
align the element support opposite the terminal end with
the slot in the hold down clip, and snap into place.
3. Afterthe element is positioned in the drip bowl, line up the
terminal end with the terminal plug as shown.
When lowering the lift-up range top, grasp the
sides with finger-tips only. Be careful not to pinch fingers. DO
NOT d top or bend the range top when raising or lowering. This
could damage the surface.
Changing
the Oven Light (some models)
The oven light automatically turns ON when the door is
opened. The oven light may also be manually operated by
pressing the oven light switch located on top of the control
panel. The oven light bulb is located at the rear of the oven
and is covered with a glass shield held by a wire holder. The
glass shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1. Turn electrical power off at the main source or unplug
the range.
2. Press wire holder to one side to release the glass
shield.
Oven
3.
4.
Holder
5.
6.
Replace bulb with a new 40
watt appliance bulb.
Replace glass shield over
bulb and snap wire holder
into place.
Turn power back on again
at the main source (or plug
the range back in).
The clock will then need to
be reset. To reset, see
Setting the Clock and
Minute Timer in this Use
& Care Manual.
Be sure the range is unplugged and all parts are
COOL before replacing oven light. Weara leather-faced glove
for protection against possible broken glass.
15
General
Care
& Cleaning_
(cont'd)
Removing
Door Hinge
locations
with oven door
fully
\
Fig. 1
Fig. 2
Oven
Door
open
& Replacing
the
Lift-Off
Oven
Door
The door is heavy. For safe, temporary storage, lay the door flat with
the inside of the door facing down.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor- See Fig. 1).
2. Pull the door hinge locks on both left and right door hinges down from the oven
frame completely towards the oven door (See Fig. 2). A tool such as a small flatblade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door will stop into this position
just before fully closing).
5. With the oven door in the broil stop position, lift the oven door hinge arms over the
roller pins located on each side of the oven frame (See Fig. 4).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle - See Fig. 3).
2. Holding the oven door at the same angle as the removal position, seat the hook
of the hinge arm over the roller pins located on each side of the oven door frame
(See Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor- See Fig. 1).
4. Push the door hinge locks up towards and intothe oven frame on both left and right
oven door hinges (See Fig. 2) to the locked position.
5. Close the oven door.
Special Door Care Instructions - Most oven doors contain glass that can break.
Read the following recommendations:
t. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may weaken its structure
causing an increased risk of breakage at a later time.
Fig. 3
Fig. 4
16
Yourovencontrolhasbeenpreciselysetatthefactory.Thissettingmaydifferfromyourpreviousovenhowever,soyourrecipe
timesmaynotgiveyoutheresultsyouexpect.If youthinkthattheoveniscookingtoohotor toocoolforyourrecipetimes,
youcanadjustthecontrolsothattheovencookshotterorcoolerthanthetemperature
displayed.
ToAdjustOvenTemperature:
1. Press_.
2. Setthetemperature
to550°F(287°C)bypressingandholdingthe i_k.
3.
Within 2 seconds, p ross and hold _
until the 2 digit display appears. Release _.
The display now indicates the amount
of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control
has the original factory calibration, the display will read "0."
4.
Thetemperaturecann_wbeadjustedup_rd_wn35°F(17°C)_in5°Fstepsbypressingandh_ldingthe
,_
or V.
Adjust
until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear
before the number to indicate that the oven will be cooler by the displayed amount of degrees.
5.
When you have made the desired adjustment, press _
to go back to the time of day display.
Note: Oven temperature adjustments made wi!! not change the Se!f,C!eaning feature temperature,
17
Solutions to Common Problems
Before you call for service, review the following list. It may save you time & expense. The list includes common occurrences
(shown in bold) that are not the result of defective workmanship or materials in this appliance. The possible corrections to these
problems are provided with the problem listed:
Oven smokes excessively
during broilinq - (1) Control(s) not
set properly. Follow Broil instructions under Setting Oven
Controls. (2) Make sure oven door is opened to broil stop
position. (3) Meat too close to the broil element. Reposition the
broil rack to provide proper clearance between the meat & the
element. Preheat the broil element for searing. (4) Meat not
properly prepared. Remove excess fat from meat. Cut fatty
edges to prevent curling, but do not cut into lean. (5) insert on
broiler pan wrong side up & grease not draining. Always place
grid on the broiler pan with ribs up & slots down to allow grease
to drip into pan (some models). (6) Grease has built up on oven
surfaces. Regular cleaning is necessary when broiling
frequently. Old grease or food spatters cause excessive
smoking.
Range is not level - (1) Poor installation. Place oven rack in
center of oven. Place a level on the oven rack. Adjust leveling
legs at base of range until the oven rack is level. (2) Be sure
floor is level, strong & stable enough to adequately support
range. (3) If floor is sagging or sloping, contact a carpenter to
correct the situation. (4) Kitchen cabinet alignment may make
range appear not level. Be sure cabinets are square & have
sufficient room for range clearance.
Cannot move appliance easily. Appliance must be accessible
for service - (1) Cabinets not square or are built in too tightly.
Contact builder or installer to make appliance accessible. (2)
Carpet interferes with range. Provide sufficient space so range
can be lifted over carpet.
Surface element too hot or not hot enoughh - Incorrect control
setting. Be sure the correct control is ON for the element to be
used.
Poor baking results - Many factors affect baking results. Make
sure the proper oven rack position is used. Center food in the
oven & space pans to allow air to circulate. Allow the oven to
preheat to the set temperature before placing food in the oven.
Try adjusting the recipe's recommended temperature or baking
time. if you feel the oven is too hot or cool, see Adjusting
Your
Oven Temperature
in this Use & Care Manual.
Surface element does not heat - (1) Lightweight or warped
pans used. Use only flat, evenly balanced, medium or
heavyweight cookware. Flat pans heat better than warped
pans. Cookware materials and weight of the material affect
heating. Heavy & medium-weight pans heat evenly. Because
lightweight pans heat unevenly, foods may burn easily. (2) No
power to the appliance. Check steps under "Entire Appliance
Does Not Operate" in this checklist. (3) Incorrect control
setting. Make sure the correct control is ON for the surface
element to be used.
Soil not completely removed after Self-Cleaning cycle Failure to clean bottom, front top of oven, frame of oven or door
area outside oven seal. These areas are not in the SelfCleaning area, but get hot enough to burn on residue. Clean
these areas before the Self-Cleaning cycle is started. Burnedon residue can be cleaned with a stiff nylon brush and water or
a nylon scrubber. Be careful not to damage the oven gasket.
Entire appliance does not operate - (1) The time of day is not
set. The time of day must first be set in order to operate the
oven. See "To Set the Clock" in the Setting Oven Controls
section.(2) Make sure cord/plug is plugged correctly into outlet.
(3) Service wiring is not complete. Contact your authorized
service agent. (4) Electrical power outage. Check house lights
to be sure. Call your local electric company for service.
Oven does not operate - Be sure the oven controls are set
properly for the desired function. See Setting Oven Controls
this Use & Care Manual or read the instructions "Entire
appliance does not operate" in this checklist.
Self-Cleaninc! cycle does not work - (1) Oven control not set
properly. Follow instructions under Self-Cleaning.
(2) SelfCleaning cycle was interrupted. Follow steps under "Stopping
or interrupting a Self-Cleaning Cycle" under Self-Cleaning.
Drip bowls are pitting or rusting_(Coil
Cooktop models only) (1) Foods with acids, such as tomatoes, if allowed to stand in/
on bowls will cause corrosiion. Remove and wash drip bowls
as soon as possible after a spill over. (2) Normal environment.
Houses located along sea coasts are exposed to salt air.
Protect bowls as much as possible from direct exposure to salt
air.
in
Oven light does not work (some models) - Replace or tighten
bulb. See Changing Oven Light section in this Use & Care Manual.
Drip bowls are turning color or distorted (Coil Cooktop
models only) - Bottom surface of cookware extends beyond
surface element and touches cooktop surface. This can cause
high enough temperatures to discolor the drip bowls. DO NOT
use cookware of this type. Pan sizes should be matched to the
size of the element. Replacement drip bowls may be
purchased from your appliance dealer.
Oven control beeps & displays any F code error (for example
FI_ - Electronic control has detected a fault condition. Press
CLEAR/OFF to clear the display & stop beeping. Reprogram
oven. if fault recurs, record fault number. Press CLEAR/OFF &
contact an authorized service agent.
Flames inside oven or smoking from oven vent - Excessive
spillovers in oven. For example this will happen for pie
spillovers or large amounts of grease left on the oven bottom.
Wipe up excessive spillovers before starting oven. If flames or
excessive smoke are present see "Broiling" in the Setting
Oven Controls section.
18
19
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be
defective in materials or workmanship
when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1.
Products with original serial numbers that have been removed, altered or cannot be readily determined.
2.
Product that has been transferred
Canada.
3.
Rust on the interior or exterior of the unit.
4.
Products purchased "as-is" are not covered by this warranty.
5.
Food loss due to any refrigerator
from its original owner to another party or removed outside the USA or
or freezer failures.
6.
Products used in a commercial
7.
Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
setting.
8.
Service calls to correct the installation
9.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it is shipped from the factory.
of your appliance or to instruct you how to use your appliance.
10. Service calls to repair or replace appliance
knobs, handles, or other cosmetic parts.
light bulbs, air filters, water filters, other consumables,
or
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance
floors, cabinets, walls, etc.
or home incurred during installation,
including but not limited to
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLEAND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENTAS
PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIODALLOWED
BY LAW, BUT NOT LESS THAN ONE YEAR.
ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN
LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOTALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOTAPPLY TO
YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
If You Need
Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada
Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and
parts under this warranty must be performed by Electrolux or an authorized service company. Product features or
specifications as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta,
GA 30907
Canada
1.800.668.4606
[] Electrolux
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
LSV 3E4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 20 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 13:01:25 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools