Frigidaire FCGM201RFB2 User Manual REFRIGERATOR/FREEZER Manuals And Guides L0911500

FRIGIDAIRE Refrigeration Commercial Manual L0911500 FRIGIDAIRE Refrigeration Commercial Owner's Manual, FRIGIDAIRE Refrigeration Commercial installation guides

User Manual: Frigidaire FCGM201RFB2 FCGM201RFB2 FRIGIDAIRE REFRIGERATOR/FREEZER - Manuals and Guides View the owners manual for your FRIGIDAIRE REFRIGERATOR/FREEZER #FCGM201RFB2. Home:Kitchen Appliance Parts:Frigidaire Parts:Frigidaire REFRIGERATOR/FREEZER Manual

Open the PDF directly: View PDF PDF.
Page Count: 9

iRE
CO IAL 1
COMMERCIAL FR R/REFRIGERATOR
GLASS DOOR REFRIGERATOR
TABLE OF CONTENTS
Product Registration ................................................ 2
Important Safety Instructions .................................... 2
Electrical Information ............................................... 3
Caster Installation and Setup ........................................ 3-4
Appliance Start-up ..................................................... 4
Features ................................................................. 5
Routine Maintenance ............................................... 5-6
Energy Conservation Measures ................................. 6
Troubleshooting Guide ............................................. 7-8
Wiring Diagram ....................................................... 9
READ AND SAVE THESE INSTRUCTIONS 297290801(March2009)
Product Registration
These instructions include information which is intended
to assure the operator of correct installation, operation
and service. Before attempting installation, adjustment or
maintenance, be certain of the following:
That you have read and fully understand the instructions.
That you have all the tools required and are trained to
use them.
That you have met all installation and usage restrictions
and are familiar with the functions and operations of the
unit.
That you follow all instructions exactly as given.
All the fittings, measurements, recommendations and
procedures are significant. Substitutions and approximations
must be avoided. Improper handling, maintenance, installation
and adjustment, or service attempted by anyone other than a
qualified technician, may void the future warranty claims and
cause damage to the unit and/or result in injury to the operator
and/or bystanders.Record Your Model and Serial Numbers
Record your Model and Serial Numbers
Record the model number and serial number of this appliance
in the space provided below (the serial plate is located inside
the cabinet compartment).
Model No.
Serial No.
Installetion Date
Invoice Date
Start-up Date
Telephone for Service
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD (shown
above) should be filled in completely, signed and returned to the
address provided.
Important Safety instructions
Read all instructions before using this appliance
For Your Safety
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this unit or any other appliance. Read
product labels for flammability and other warnings.
Child Safety
Destroy carton, plastic bags, and any exterior wrapping
material immediately after the appliance is unpacked.
Children should never use these items for play. Cartons
covered with rugs, bedspreads, plastic sheets or stretch
wrap may become airtight chambers and can quickly
cause suffocation.
A child might suffocate if he crawls into the appliance to
hide or play. Remove the door/lid of the appliance when
not in use, even if you plan to discard the appliance.
Many communities have laws requiring you to take this
safety precaution.
Proper Disposal of Appliance
Risk of Child Entrapment
Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators or freezers are still
dangerous - even if they will sit for "just a few days". If you are
getting rid of your old refrigerator or freezer, please follow the
instructions below to help prevent accidents:
Remove the door.
Leave shelves in place so children may not easily climb
inside.
Have the refrigerant removed by a qualified technician.
Electrical Information
These guidelines must be followed to ensure that safety
mechanisms in the design of this appliance will operate
properly.
Avoid fire hazard or electric
shock. Do not use an extension cord or an
adapter plug. Do not remove any prong
from the power cord.
Grounding type
wall receptacle
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong, J
Power supply
cord with 3-prong
grounding plug
Refer to the serial plate for correct electrical rating.
The power cord of the appliance is equipped with a
three-prong grounding plug for protection against shock
hazards. It must be plugged directly into its own properly
grounded three-prong receptacle, protected with a 15
amp time delay fuse or circuit breaker. The receptacle
must be installed in accordance with the local codes and
ordinances. Consult a qualified electrician. Receptacles
with Ground Fault Circuit Interrupters (GFCI) are NOT
RECOMMENDED. DO NOT USE AN EXTENSION
CORD OR AN ADAPTER PLUG.
If the voltage varies by 10 percent or more, appliance
performance may be affected. Operating the appliance
with insufficient power can damage the motor. Such
damage is not covered under the warranty. If you suspect
your voltage is high or low, consult your power company
for testing.
To prevent the appliance from being turned off
accidentally, do not plug the unit into an outlet controlled
by a wall switch or pull cord.
DO NOT pinch, knot, or bend the power cord in any
manner.
Other Precautions
NEVER unplug the appliance by pulling on the power
cord. Always grip the plug firmly and pull straight out from
the receptacle.
To avoid electrical shock, unplug the appliance before
cleaning.
NOTE: Turning the control to "OFF" turns off the compressor but
does not disconnect power to other electrical components.
Caster Installation and Set-up
Inspection for Damage
Inspect the underside of the cabinet and packaging for damage,
similar to what can be caused with a forklift. If hidden damage
is found after uncrating, immediately call the delivery carrier
and request an inspection. Retain all packaging and crating
materials until the inspection is complete.
Parts and Accessories
Check to make sure that you have received the box containing
all of the components listed below.
A Carriage Bolt (4) D Fixed Caster (2)
B Lock Nut (4) E Hex Screw (10)
C Swivel Caster (2)
A B
Tools Needed
CE
The following tools are required to assemble and install the
casters to the unit:
5/16", 3/8" and 9/16" Adjustable Wrench Phillips _
Socket or Open End or Pliers Screwdriver
Wrench
Uncrating and Set=up
Remove carton and all loose parts from inside the unit.
1.
2. Remove the rear access guard and place it and the
screws in a safe place for reassembly later.
3. Using an assistant, carefully tip the unit onto its back and
rest on blocks to avoid damaging the condensate drain
hose and the plastic raceway that covers the evaporator
tubing on the back of the cabinet.
4. Remove the four scews holding the wood skid to the
bottom of the unit using a 3/8" socket wrench. See Figure
1. Discard the wood skid and screws.
8.
6.
Remove and discard the two front brackets with leg
leveler using a 5/16" socket wrench. See Figure 1.
FOR GLASS DOOR MODELS ONLY - Remove bottom
door support bracket and screw opposite the door hinge
using a 3/8" socket wrench. See Figure 2.
Figure 1
5, With the help of an assistant, carefully upright the unit.
Reassemble the rear access guard with screws.
Screws
Unit will roll fo rward as it is ti pped up.
Wood Skid 4_Wood Skid
Door
Support Bracket
Figure 2
Remove Screw Befor e I
Instal!ing Caster I
Repeat Eor
Front Fixed Caster Installation
1. Locate and align fixed caster (with brake lever facing
front of unit - see Figure 3) over the same mounting
holes from bracket in Figure 1 using six hex screws (3 for
each caster). Secure the screws snug using a 3/8" open
end wrench. Repeat this procedure for opposite corner.
DO NOT OVERTIGHTEN.
Rear Swivel Caster Installation
1. Remove and discard the screws shown in Figure 4 from
each bottom corner using a 5/16" socket wrench.
2, Locate and align swivel caster over the holes and install
with two hex screws. Secure the screws snug using a
3/8" socket wrench. DO NOT OVERTIGHTEN.
3, On the opposite side of the swivel caster plate, insert
two carriage bolts through the compressor support rail
and swivel caster plate. Use a lock nut on each bolt and
tighten securely using a 9/16" socket wrench. See Figure
5.
4. Repeat the same procedure for the opposite rear corner.
Appliance Placement
Leave a one (1) inch space on all sides and the back of the
cabinet for ease of installation, proper air circulation and
electrical connections. DO NOT block the front grill on the lower
front of your appliance. Sufficient air circulation is essential
for the proper operation of your appliance. Choose a place
that is near a grounded electrical outlet. For the most efficient
operation, the appliance should be located where surrounding
temperatures will not drop below 40°F (5°C) or exceed 110°F
(43°C). Additional compressor heaters are not recommended.
4
Cool Down Period
For safe food storage, allow 24 hours for the appliance to cool
down completely before loading with food. The appliance will
run continuously for the first several hours. Do not place any
food in the appliance until after the first 24 hours of operation.
Thermostat Setting
The appliance is shipped from the factory with the thermostat
set at about the mid-point of the operating range. Adjustments
colder or warmer can be made after the appliance has
been running for at least 8 hours. Allow at least 8 hours for
temperature stabilization before re-adjusting the thermostat.
Defrost Setting
The appliance is designed to defrost automatically every 12
hours. To set the time of defrost, wait until the desired time to
defrost. With the notch on the timer knob aligned with the line
on the bracket (Fig. A), turn the defrost timer knob clockwise
slowly. The timer will click several times, then once loudly,
at which point the defrost cycle begins. The timer knob will
advance through the defrost cycle, then click loudly at the end
of the cycle. The appliance will defrost automatically every 12
hours after the first defrost cycle.
For example, to set the appliance to defrost at 10:00 AM, turn
the timer knob clockwise at 10:00 AM until the timer clicks
loudly. The appliance will defrost daily at 10:00 AM and again
12 hours later at 10:00 PM. NOTE:The appliance interior
temperature will rise slightly during the first defrost cycle.
Insulation
The insulated space of this cabinet is sealed to maintain peak
efficiency. Holes drilled in the cabinet may destroy that seal and
damage electrical wiring located in the insulated space.
DAMANGED ELECTRICAL WIRING OR WET INSULATION
CAUSED BY DRILLING WILL VOID THE WARRANTY.
Appliance Start-up
Once the appliance has been located in its permanent location
and the proper power and grounding has been provided, the
following items must be checked or completed:
Figure A
Features
e
e
e
e
e
e
e
e
e
e
e
e
e
Heavy duty epoxy powder coated adjustable shelves
NSF certified top mounted evaporator
2-Y2" urethane foam cabinet insulation
Torsion spring door closer
Heavy duty fixed and swivel casters
17 watt fluorescent lamp
Stainless steel evaporator housing
Removable stainless steel drain cover
Adjustable temperature control
NSF certified interior
Heavy duty front grill
Heavy duty commercially rated elecrtrical harness
Heavy duty removable stainless steel shelf support
Shallow
Regular
BoSom
This appliance is provided with four shelves; one goes on the
floor of the cabinet and the other three are placed in the metal
side supports, wherever they are needed. The shallow shelf
goes in the upper position
Casters
The appliance comes with four casters; two with locks for the
front of the unit and two without locks for the back of the unit.
The casters allow you to move the unit to it's final destination
with ease. The casters can then be locked into place. (Refer to
pages 3-4 for instructions.)
Adjustable Temperature Control
The adjustable cold control is located on the top left side
of the evaporator housing inside the unit. "5" is the medium
(recommended) setting and "9" is the coldest setting.
NSF Certified Temperature Gauge
This appliance is equipped with an NSF certified temperature
gauge to display cabinet internal temperature. The temperature
gauge is located on the top right side of the evaporator housing
inside the unit.
Fluorescent Lamp (Glass Door Models)
• The Glass Door Refrigerator is equipped with a 17 watt
fluorescent lamp. A ballast - lamp mismatch may result
in poor or no lighting.
If the lamp fails, replace with a lamp of the same
type and wattage. Also, replace a lamp that flickers
continuously. This could damage the ballast.
Turning the light off, when not in use, will save energy.
However, frequent ON-OFF cycling will reduce the lamp
life.
Use only NSF certified lamp which can be ordered from
your Frigidaire Commercial Service Center by calling
1-866-738-1640.
Interior Light (Stainless Steel Door Models)
The Stainless Steel Door models are equipped with a 40 watt
bulb that lights up when the door is opened. If the bulb goes
bad, replace with bulb of the same type and wattage. This is
a special bulb with a shatterproof coating. Use only an NSF
certified bulb of the same type and wattage which can be
ordered from your Frigidaire Commercial Service Center by
calling 1-866-738-1640.
Routine Maintenance
Cleaning the Interior
Be sure to turn the temperature control to "OFF" and unplug the
electrical cord. Wash the inside surface of the storage area with
warm water and baking soda solution (about one tablespoon
of baking soda per quart of warm water). Rinse thoroughly with
clean, warm water and wipe dry.
Cleaning the Exterior
Wipe the cabinet exterior occasionally with a cloth dampened in
mild detergent and water. Rinse and wipe dry with a soft cloth.
Do not use razor blades or other sharp instruments that can
scratch the appliance surface when removing adhesive labels.
Any glue left from the tape can be removed with a mixture of
warm water and mild detergent or touch the residue with the
sticky side of tape already removed. DO NOT REMOVE THE
SERIAL PLATE.
Condensate Pan
Some models have a condensate pan in a fixed position located
behind the toe grill.This must not be removed from under the
cabinet. If the pan is removed, condensate will drop onto the
floor.
Power Failure
DO NOT open the appliance lid unnecessarily if the appliance is
off for several hours.
If a power failure occurs, pack seven or eight pounds of dry ice
into the appliance every 24 hours. Look in the Yellow Pages
under "Dry Ice", "Dairies", or "Ice Cream Manufacturers" for local
dry ice suppliers. Always wear gloves and use caution when
handling dry ice.
Energy Conservation Measures
This appliance is designed for efficiency with heavy foam
insulation. However, there are things that the user can do to
maintain the appliance in operating condition.
• Do not operate the appliance any colder than necessary
to maintain safe, product storage temperatures.
Make sure the appliance is located to prevent direct
exposure to sunlight, air ducts, etc.
Keep the door closed except for normal use. Inspect the
door often to see that it self-closes and the gaskets are in
good condition.
Do not overstock the product in the cabinet because it
will block the normal air flow.
Have at least annual inspections by a qualified service
company to see that the refrigerant charge is correct.
This appliance operates more efficiently in a cooler
ambient than in a hot ambient. Try to maintain an ambient
below 80°F (27°C) and 65% RH (Relative Humidity) for
maximum efficiency.
Periods of Non=use and Moving Tips
Leave the appliance operating during periods of non-use of less
than three (3) weeks.
Long Periods of Non-use
If the appliance will not be used for several months:
• Remove all food and unplug the power cord.
• Clean and dry the interior thoroughly.
• Leave the appliance door open slightly, blocking it open if
necessary, to prevent odor and mold growth.
Moving
When moving the appliance, follow these guidelines to prevent
damage:
• Disconnect the power cord plug from the wall outlet.
• Remove foods, then defrost, and clean the appliance.
Secure all loose items such as base panel, baskets,
and shelves by taping them securely in place to prevent
damage.
In the moving vehicle, secure appliance in an upright
position to prevent movement. Also, protect outside of
appliance with a blanket or similar item.
TROUBLESHOOTING
GUIDE
PROBLEM
Before calling for service, review this list. It may save you time and expense. This list includes
common occurrences that are not the result of defective workmanship or materials in this
appliance.
CAUSE CORRECTION
APPLIANCE OPERA TION
Appliance does not run.
Appliance runs too much or
too long.
Interior appliance
temperature is too cold.
Interior appliance
temperature is too warm.
Appliance external surface
temperature is warm.
SOUND AND NOISE
Louder sound levels
whenever appliance is on.
Louder sound levels when
compressor comes on.
Popping or cracking sound
when compressor comes
on.
* Appliance is plugged into a circuit
that has a ground fault interrupt.
* Temperature control is in the "OFF"
position.
* Appliance may not be plugged in, or
plug may be loose.
* House fuse blown or tripped circuit
breaker.
* Power outage
* Room or outside weather is hot.
* Appliance has recently been
disconnected for a period of time.
* Large amount of warm or hot food
have been stored recently.
* Door is opened too frequently or
kept open too long.
* Appliance door may be slightly
* Temperature control is set too low.
* Appliance gaskets are dirty, worn,
cracked or poorly fitted.
* Temperature control is set too low.
* Temperature control is set too
warm.
* Door is opened too frequently or
kept open too long.
* Appliance door may be slightly
* Large amount of warm or hot food
have been stored recently.
* Appliance has recently been
disconnected for a period of time.
* The external appliance walls can be
as much as 30°F warmer than room
temperature.
* Modern appliances have increased
storage capacity and more stable
temperatures. They require heavy
duty compressors.
* Appliance operates at higher
pressures during the start of the ON
cycle.
* Metal parts undergo expansion and
contraction, as in hot water pipes.
* Use another circuit. If you are unsure about the outlet,
have it checked by a certified technician.
* See Thermostat Setting.
* Ensure plug is tightly pushed into outlet.
* Check!replace fuse with a 15 amp time delay fuse.
Reset circuit breaker.
* Check house lights. Call local Electric Company.
* It's normal for the appliance to work harder under
these conditions.
* It takes 24 hours for the appliance to cool down
completely.
* Warm food will cause appliance to run more until the
desired temperature is reached.
* Warm air entering the appliance causes it to run
more. Open the door less often.
* See "Door Problems".
* Turn control knob to a warmer setting. Allow several
hours for the temperature to stabilize.
* Clean or change gasket. Leaks in the lid seal will
cause appliance to run longer in order to maintain
desired temperature.
* Turn control knob to a warmer setting. Allow several
hours for the temperature to stabilize.
* Turn control knob to a colder setting. Allow several
hours for the temperature to stabilize.
* Warm air entering the appliance causes it to run
more. Open the door less often.
* See "Door Problems".
* Wait until the appliance has had a chance to reach its
selected temperature.
* appliance requires 24 hours to cool down completely.
* This is normal while the compressor works to transfer
heat from inside the appliance cabinet.
* This is normal. When the surrounding noise level is
low, you might hear the compressor running while it
cools the interior.
* This is normal. Sound will level off or disappear as
appliance continues to run.
* This is normal. Sound will level off or disappear as
appliance continues to run.
PROBLEM l CAUSE j
SOUND AND NOISE (Cont.)
Bubbling or gurgling sound, *Refrigerant (used to cool appliance) *This is normal.
is circulating throughout the system.
Vibrating or rattling noise. *Appliance is not level. It rocks on
the floor when it is moved sliqhtlv.
•Floor is uneven or weak.
• appliance is touching the wall.
WATER / MOIS TURE / FROS T INSIDE A PPL IANCE
Moisture forms on inside [* Weather is hot and humid, which 1* This is normal.
RE
appliance walls. | increases internal rate of frost build-_
B |
/up. I
I * Door is slightly open. I * See "Door Problems".
* oor is kept open too long or is * Open the door less often.
opened too frequent V.
CORRECTION
i Interior needs to be cleaned.
Foods with strong odors are in the
appliance.
* Level the appliance by putting wood or metal shims
under part of the appliance.
* Ensure floor can adequately support appliance. Level
the appliance by putting wood or metal shims under
part of the appliance.
* Re-level appliance or move appliance slightly.
ODOR IN APPLIANCE
Odors in appliance. * Clean interior with sponge, warm water, and baking
soda.
• Cover the food tightly.
DOOR PROBLEMS
Door will not close. * Level the appliance by putting wood or metal shims
under part of the appliance.
* Appliance is not level. It rocks on
the floor when it is moved slightly.
* Floor is uneven or weak.
* Ensure floor can adequately support appliance. Level
the appliance by putting wood or metal shims under
part of the appliance.
LIGHTING PROBLEMS
Light bulb is not on. * See "Fluorescent Lamp" or "Interior Light" on
Features Section.
• See "appliance Does Not Run".
* he fluorescent lamp or light bulb is
burned out. _ ....
No electric current is reaching the
appliance.
IMPORTANT SAFETY NOTICE
The information provided herein is designed to assist qualified repair personnel only.
Untrained persons should not attempt to make repairs due to the possibility of electrical
shock. Disconnect the power cord before servicing.
ELECTRICAL CIRCUIT
F _nJiiE F]
BLK
.F--'--L BLLI . I YF[ L=[
_L
L J
OR
3EFF_I
BLK
it_li YEL t=% B)H
I'='=='=1= BLU _ _#kL U
il "
L J
OR
BLK
r--"-"i BLU . I _l,ilU
I
q ', L-o_u--e,,,L-
_H
J
STAINLESS STEEL DOOR STAINLESS STEEL DOOR
REFRIGERATOR FREEZER
GLASS DOOR
REFRIGERATOR
Ovedosd
White
IMPORTANT
IF ANY GREEN GROUNDING WIRES ARE REMOVED DURING SERVICING, THEY MUST BE RETURNED
TOTHEIR ORIGINAL POSITION AND PROPERLY SECURED.

Navigation menu