Frigidaire Fse Fsg748Gf Users Manual 7130e
FSE/FSG748GF 131713000
FSECFSGC748GF to the manual de4babf5-bf9e-40c3-9f92-b6fb12dfac64
2015-01-25
: Frigidaire Frigidaire-Fse-Fsg748Gf-Users-Manual-214328 frigidaire-fse-fsg748gf-users-manual-214328 frigidaire pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
FSEC/FSGC748GF FSE/FSG748GF OPERATING INSTRUCTIONS AUTOMATIC PERM PRESS NORMAL DRY AUTOMATIC REGULAR NORMAL DRY NORMAL DRY MOISTURE SENSOR INTERIOR DRUM LIGHT TIMED DRY REGULAR TIMED DRY REGULAR TIMED DRY REGULAR Before Operating Your Dryer 6. Turn cycle selector clockwise to desired setting. Read your dryer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results. 7. Start dryer. Turn the Turn to Start control clockwise to ON. Hold for 1-2 seconds and release. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your dryer Owner's Guide before operating this appliance. 8. When Cycle Signal control is on, a signal will sound at the end of the cycle. 9. Remove items immediately and hang or fold. 10. Clean lint screen after every load. Operating Steps Temperature Selection Read Drying Procedures in your Owner's Guide. It explains these operating steps in detail. Always follow directions on fabric care labels. 1. Prepare items for drying. 2. Check that lint screen is clean and in place. 3. Load the dryer. If desired, add a dryer fabric softener sheet. 4. Close the dryer door. 5. Set Dry Temperature and Cycle Signal controls. Printed in U.S.A. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. Use Air Fluff-No Heat setting only. The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM HEAT, and KNITS/DELICATES-LOW HEAT temp-erature settings may be used with any cycle setting. The AIR FLUFF-NO HEAT setting can be used only in the Timed Dry cycle. AUTOMATIC AUTOMATIC DELICATE DELICATE AIR FLUFF-NO HEAT setting tumbles the load without heat. Use Air Fluff to freshen clothing, pillows or blankets, or to dust draperies. Cycle Selection Turn cycle selector clockwise to desired cycle and setting. Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble during the cool down period. This reduces wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. (continued, reverse side) " Cut along this edge to separate English from other languages. " P/N 131713000 (9803) AUTOMATIC PERM PRESS NORMAL DRY AUTOMATIC REGULAR NORMAL DRY NORMAL DRY TIMED DRY REGULAR TIMED DRY REGULAR MOISTURE SENSOR INTERIOR DRUM LIGHT AUTOMATIC AUTOMATIC DELICATE DELICATE Cycle Selection (continued) • Unheated tumbling continues during the Press Saver for 22 minutes to help reduce wrinkling. • When the Cycle Signal is on, it will sound briefly every 5 minutes as a reminder to remove the load. Automatic Regular Cycle • When the Cycle Signal is on, it will sound briefly every 5 minutes as a reminder to remove the load. Energy Saving Tips This cycle is best for cotton items that can be tumble dried. Drying time is determined automatically at the temperature selection of your choice. • Set cycle selector on NORMAL DRY. • For items requiring more drying time, set cycle selector on MORE. • For items requiring less drying time, set cycle selector on LESS. Automatic Delicate Cycle This cycle is best for knit and delicate items. Drying time is determined automatically at the temperature selection of your choice. • Low heat is suggested for knit and delicate items. • Set cycle selector on NORMAL DRY. • For items requiring more drying time, set cycle selector on MORE. • For items requiring less drying time, set cycle selector on LESS. • If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver setting. Timed Dry Regular Cycle This cycle provides up to 65 minutes of drying time at the temperature selection of your choice. Automatic Perm Press Cycle This cycle is best for permanent press items. Drying time is determined automatically at the temperature selection of your choice. • Medium heat is suggested for permanent press items. • Set cycle selector on NORMAL DRY. • For items requiring more drying time, set cycle selector on MORE. • For items requiring less drying time, set cycle selector on LESS. • If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver setting. • Unheated tumbling continues during the Press Saver for 22 minutes to help reduce wrinkling. • Keep the lint screen clean and exhaust the dryer correctly. • Sort laundry properly and select proper temperature and cycle settings. Choose an automatic dry cycle whenever possible for accurate drying time. • Dry only full loads. Single items and small loads usually take longer to dry. • Avoid overloading, adding wet items to a partially dry load, and overdrying. • Dry one load after another to take advantage of a warm dryer. • Opening the door needlessly causes warm air to escape, which prolongs drying time. • If possible, use the dryer on low humidity days. • Install the dryer in an area where the room temperature is at least 45°F (7°C). P/N 131713000 (9803)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 2 Create Date : 1910:10:91 90:95:94 Producer : Acrobat Distiller 3.01 for Windows Subject : 7130e Author : clousedl Creator : Adobe PageMaker 6.52 Title : 7130eEXIF Metadata provided by EXIF.tools