Fu Da Tong Technology WII07 Wii Contactless Charger User Manual manual
Fu Da Tong Technology Co., Ltd Wii Contactless Charger manual
manual
Wii Contactless Charger
User Manual
Model No: Wii 07
Contents
Chapter 1 Introduction………………………………………………...……………….. 1
Chapter 2 Names of the Parts………………………………………...………………… 1
Chapter 3 Explanation of Indicator Light….………………………………………….... 3
Chapter 4 Instruction of Installation and Operation…….…………………………...…… 3
Chapter 5 Specifications of the Product…………………………………………..……. 6
Specifications of Wii Contactless Charger’s AC Adapter……………………………. 6
Specifications of Wii Contactless Charger………………………………...…………. 6
Specifications of Wii Contactless Charger’s Re-chargeable Battery………………..6
Guarantee of the Product…………………………………………………………...…….. 7
Please read the owner’s manual and follow the instructions before using this product
1
Chapter 1 Introduction
Product Name: Wii Contactless Charger
Explanation: Contactless Charger for Wii Controllers
Instruction: Remove existing battery cover and replace with the enclosed
one before using Wii Contactless Charger, then place Wii
Controllers into the charging sockets.
Date of Manufacture: 2007
Chapter 2 Names of Parts
Charger Base
Front
Charging Sockets
Indicator Lights
2
Back
AC Adapter Jack
Wii Controller
3
Wii Controller Battery Cover AC Adapter
Top of the Cover Charger Base Connector
Bottom of the Cover
Contact Pins Adapter Plug
Chapter 3 Explanation of Indicator Light
Red Light On: Not Charging
Red Light Flashing: Error
Green Light on: Charging Complete
Green Light Flashing: Charging
Chapter 4 Instruction of Installation and Operation
Instruction of Installing Wii Controller
1. First remove the original battery cover, place re-chargeable batteries, then replace with enclosed
battery cover, as shown below.
4
a. Remove the original battery cover.
b. Install re-chargeable batteries.
c. After installing the batteries, slide in the top of the enclosed battery cover.
Note: Please make sure that the pins match the metal connector.
d. Press down the enclosed battery cover.
5
2. Instruction of AC adapter
a. Connect AC Adapter into the Wii Contactless Charger Jack.
b. Connect adapter plug into the power outlet.
Note
For your own safety and to avoid damaging the product, please follow the rules below:
1. Make sure that you have changed to the re-chargeable batteries before use.
2. Make sure that you have changed to the enclosed battery cover before use.
3. Whenever using the product, do not let it come in contact with any liquid.
4. For your own safety, do not disassemble or damage the product in any way.
5. For your own safety and the efficiency of the product, keep it away from any metal objects.
Warning
1. Keep the product out of direct sun light and away from heat and fire.
2. For use by children age 12 or above and then only under the supervision of an adult.
3. This product can only be used with the enclosed battery cover and re-chargeable batteries.
4. Please take note of the indicator light signal, especially if the red light is flashing which means
error, please stop using immediately and check the instructions in the owner’s manual.
6
Chapter 5 Specifications of the Product
Specifications of Wii Contactless Charger’s AC Adapter
Rated Input Capacity: 100V~240V/50~60Hz
Rated Output: DC6.0V 1.0A 6.0W MAX
Specifications of Wii Contactless Charger
Power source: DC6V/1A
Radio Frequency: 250KHz
Power Consumption: Not charging approx. 1W ; Charging approx. 5W
Operating Temperature: 0~55℃
Operating Humidity Range: 20~80%
External Dimensions: 120 x 55mm(Diameter/Height)
Weight: Approx. 180g
Specifications of Wii Contactless Charger’s re-chargeable Battery
Battery Type: AA 1.2V 1800mA (Two)
Charging Time: Approx. 4.5 hours
Battery Duration: Approx. 25 hours
7
Guarantee of the Product
If the product fails to operate under normal usage, please send it back to be repaired according to the
references below:
1. Enclose the guarantee card when you send the product.
2. Keep the guarantee card safe, the guarantee card will not be reissued if lost.
3. Malfunction during the guarantee period, will be repaired free of charge.
4. Under the following circumstances, a fee will be charged accordingly:
a. Malfunction caused by using incorrectly or disassembling personally.
b. Malfunction caused by dropping accidentally after purchasing.
c. Malfunction caused by natural disasters such as fire, gas explosion, power surge… etc.
d. Failure to return the guarantee card when returning the product.
e. The information on the guarantee card is not correctly written or has been changed in any
way.
Purchaser:
Date of Purchase:
Address:
Telephone:
Retailers’ Stamp:
Name of the Product: Serial number:
Federal Communication Commission Interference Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits and also to prevent
interference to the nearby radio and television reception. It is essential that only the supplied power
cord by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.