Fugoo FSNAR Fugoo Bluetooth Speaker Remote Control User Manual
Fugoo Corporation Fugoo Bluetooth Speaker Remote Control
Fugoo >
User Manual
Remote Control User Manual model FSNAR page 1 1/16/2014
Fugoo Bluetooth Speaker Remote Control
User
Manual
model FSNAR
Contents
In the box 2
Using
the
remote
control 2
R
emot
e
control buttons 2
First-time setup: pairing the remote with your Fugoo Bluetooth Speaker 2
Using the remote control with your Fugoo Bluetooth Speaker 2
Using another Fugoo remote with your Fugoo Bluetooth Speaker 3
R
eplacing
the battery 3
Customer
support 4
Legal
notices 4
Remote Control User Manual model FSNAR page 2 1/16/2014
In the box
•
Fugoo remote control (included with some models)
•
R
emot
e
wrist strap
(included with some models)
Using the remote control
Remote control buttons
#
Description
1
P
la
y/P
ause
2
Ne
x
t
track
3
Previous
track
4
Volume
up
5
Volume do
wn
6
Action
First-time setup: pairing the remote with your Fugoo Bluetooth Speaker
The remote for the Fugoo Bluetooth Speaker works over a Bluetooth wireless link. Follow
these instructions to pair the remote with the speaker before use. You'll probably only
need to pair the remote with the speaker the first time you use it.
1. Turn on your speaker.
2. Reconnect the speaker to your phone or to any other Bluetooth device it's been
previously connected to. You can typically reconnect simply by having both the speaker
and the other device on, and then by placing them within 30 feet of each other.
3. Hold or place the remote within two inches of the speaker.
4. Press any button on the remote.
You may hear a voice prompt confirm that pairing has been successful.
Using the remote with your Fugoo Bluetooth Speaker
Once the remote and the speaker have been paired, press the
+
(volume up)
button
once to re-establish the connection between the
remote and the speaker.
You may hear a
voice prompt confirm that pairing has been successful.
The buttons on the remote work the same way as the corresponding buttons on
the
speaker itself, except that the remote also has Next Track and Previous Track
buttons.
See the Fugoo Bluetooth Speaker User Manual for detailed descriptions of how to
use the various buttons to control streaming music and speakerphone calls.
Remote Control User Manual model FSNAR page 3 1/16/2014
Using another Fugoo remote with your Fugoo Bluetooth Speaker
If your speaker has been previously paired with a Fugoo remote, follow these steps to
clear the speaker's pairing list before can using another Fugoo remote with the
speaker.
1. Turn on your speaker.
2. P
ress and hold the Bluetooth button for 10 seconds to clear the pairing list.
3. Reconnect the speaker to your phone or to any other Bluetooth device it's been
previously connected to. You can typically reconnect simply by having both the speaker
and the other device on, and then by placing them within 30 feet of each other.
4. Hold or place the remote within two inches of the speaker.
5. Press any button on the remote.
You may hear a voice prompt confirm that pairing has been successful.
Replacing the battery
The remote for the Fugoo Bluetooth Speaker operates from a readily-available 3 volt
CR2032 lithium button cell battery. It may last as long as three years, so will rarely need
replacing.
1. Use a small Phillips screwdriver to loosen the captive screw on the underside of the
remote. Turn the screw until it releases and pops upward. Don't try to remove the
screw, which is held in place by a spring.
2. Insert the edge of a small coin, or a
CR2032
battery, into the slot in the battery
cover (beneath the lanyard hole), and gently pry the cover open.
3. Turn the battery cover over, and pop the old battery out with a thumbnail or a small
flat-blade screwdriver.
4. Orient the new battery so that its '
+
' sign is facing the inside of the battery cover
(also marked with a "
+
". sign).
5. Insert the battery under the two plastic tabs next to the edge of the battery cover.
6. Press the new battery firmly to seat it against the remaining plastic tab.
7. Insert the battery cover back into the metal frame of the remote control, and press it
firmly until it seats securely, and its edge is flush with the body of the remote.
8. Re-tighten the screw in the battery cover, just enough to seat it.
Remote Control User Manual model FSNAR page 4 1/16/2014
Legal notices
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can
obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
C
OFE
TEL
La operación de este equipo está sujeta a las
siguien
t
es
dos condiciones: (1) es posible que este equipo
o
dispositivo
no
cause
interferencia
perjudicial
y
(2) este equipo
o
dispositivo debe aceptar cualquier
in
t
er
f
er
encia,
incluyendo la que pueda causar su operación
no deseada.