Fuji Film 03000004 NFC Reader/Writer Module User Manual
Fuji Film Corporation NFC Reader/Writer Module
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3289632 |
| Application ID | 3jG2nPPuBBxPl9jMT3IiTw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.42kB (42776 bits) |
| Date Submitted | 2017-02-20 00:00:00 |
| Date Available | 2017-02-20 00:00:00 |
| Creation Date | 2017-02-17 11:53:15 |
| Producing Software | Acrobat Distiller 15.0 (Windows) |
| Document Lastmod | 2017-02-17 11:53:15 |
| Document Title | Microsoft Word - ICM-3200T-M_User_Manual_ｈ.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 14416743 |
Document No. :ZST300-078 For NFC Reader/Writer Module ICM-3200T-M 2016/12/01 Document No. : ZST300-078 1. Introduction This module is not sold to general end users directly. Therefore there is no user manual of module itself. For the details about this module, please refer to the specification of module. This module should be installed in the host device according to the theory of operation-interface specification (Installation Procedure). 2. Approvals FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart C of the FCC Rules. FCC ID : W2Z-03000004 IC (Industry Canada) IC: 7736B-03000002 FCC/IC NOTICE This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 2016/12/01 Document No. : ZST300-078 3. Requirement of Labeling When selling the host device in which this module was embedded in USA or Canada, the following information must be indicated on the host device. ＜USA＞ Contains Transmitter Module FCC ID：W2Z-03000004 or Contains FCC ID：W2Z-03000004 ＜Canada＞ Contains IC ID：7736B-03000002 CAN ICES-3(B)/NMB-3(B) FCC/IC NOTICE This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. *If it is difficult to describe this statement on the host product due to the size, please describe in the User manual. 4. Requirement of User Manual Statement When selling the host device in which this module was embedded in USA or Canada, the following statements must be described on the user manual of the host device. FCC/IC NOTICE This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. **When it is possible to describe this statement on the host product, please describe on the host product. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2016/12/01 Document No. : ZST300-078 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 2016/12/01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : 14416743 Create Date : 2017:02:17 11:53:15+09:00 Modify Date : 2017:02:17 11:53:15+09:00 XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 15.0 (Windows) Format : application/pdf Title : Microsoft Word - ICM-3200T-M_User_Manual_ｈ.docx Creator : 14416743 Document ID : uuid:43afab87-7f31-465f-aec9-400a4d0a57f5 Instance ID : uuid:8e24bb31-4760-4eec-9bc2-09bcdbec01d7 Page Count : 4EXIF Metadata provided by EXIF.tools