Fuji Film 4KN RFID Transmitter Module User Manual

Fuji Film Corporation RFID Transmitter Module Users Manual

Users Manual

Company Atmel Beijing Model AT88CRF-USB232 Date Ver Rev Designer James Liu  17-April-2008Approval Lucy Wang  17-April-20081 1  User Manual 1“AT88CRF-USB232” RFID reader has two kinds of interface.And the interface is selected automatically by the first command.If the reader received USB commands after power on, the interface is fixed to USB 1.1.If the reader received RS-232C commands after power on, the interface is fixed to RS-232C. The software version of this document is“USB/RS232 Reader.V1.04”.
Company Atmel Beijing Model AT88CRF-USB232 Date Ver Rev Designer James Liu  17-April-2008Approval Lucy Wang  17-April-20081 1  User Manual 2Connector Pin Layout8Pin Shield GND ( for cable shield )7Pin Signal GND ( USB )6Pin USB D+ ( USB )5Pin USB D- ( USB )4Pin VBUS (5Vdc) ( USB / RS232C )3Pin TXD ( RS232C )2Pin RXD ( RS232C )1Pin Signal GND ( RS232C )InterfaceUSB mode :Pin 4-8 have to be connected.RS-232C mode :Pin 1-4 and Pin8 have to be connected.CN1LED2LED1CN21                     8  Pin
Company Atmel Beijing Model AT88CRF-USB232 Date Ver Rev Designer James Liu  17-April-2008Approval Lucy Wang  17-April-20081 1  User Manual 3Interface conditionUSBThe condition is compliant with USB 1.1.RS 232CBaud rate : 38400 bpsData length : 8 bitParity : noneStop bit : 1 bitLED conditionLED1  (Blue)This LED show the Field status.ON  :  Field ON.OFF:   Field Off. LED2  (Green)ON  :  Power is supplied.OFF:  Power is not supplied. CN1LED2LED118 Pin
Company Atmel Beijing Model AT88CRF-USB232 Date Ver Rev Designer James Liu  17-April-2008Approval Lucy Wang  17-April-20081 1  User Manual 4Application SoftwareFor controlling this reader , the DLL file”HG_Crypto_Reader.dll” is prepared.This program supports three kinds of command.1) Open port  ( Select USB or RS-232C )2) Close port3) Communication functionField open , Field Close , SW status check (USB only) , RFID communication , etc.More detail information is described in the Software Manual of AT88CRF-USB232.

Navigation menu