Fujifilm Digital Camera S2000 Users Manual FINEPIX S2000HD Owner's

S2000 to the manual ebfdda94-7c6e-448f-a726-5135f3be3405

2015-02-02

: Fujifilm Fujifilm-Digital-Camera-S2000-Users-Manual-403066 fujifilm-digital-camera-s2000-users-manual-403066 fujifilm pdf

Open the PDF directly: View PDF PDF.
Page Count: 148

DownloadFujifilm Fujifilm-Digital-Camera-S2000-Users-Manual- FINEPIX S2000HD Owner's Manual  Fujifilm-digital-camera-s2000-users-manual
Open PDF In BrowserView PDF
BL00798-200(1)

E

Before You Begin
First Steps

Owner’s Manual
Thank you for your purchase of this
product. This manual describes
how to use your FUJIFILM FinePix
S2000HD digital camera and the
supplied software. Be sure that you
have read and understood its contents before using the camera.

Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus

For information on related products, visit our website at
http://www.fujifilm.com/products/index.html

Technical Notes
Troubleshooting
Appendix

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions should be read
before the appliance is operated.
• Retain Instructions: The safety and
operating instructions should be
retained for future reference.
• Heed Warnings: All warnings on the
appliance and in the operating instructions should be adhered to.
• Follow Instructions: All operating and
use instructions should be followed.

Alternate Warnings: This video product is equipped with a three-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug
will only fit into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the plug
into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of
the grounding type plug.

Water and Moisture: Do not use this
video product near water—for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool,
and the like.

Power-Cord Protection: Power-supply cords should be routed so that
they are not likely to be walked on
or pinched by items placed upon
or against them, paying particular
Overloading: Do not overload wall out- attention to cords at plugs, conveInstallation
Power Sources: This video product lets and extension cords as this can nience receptacles, and the point
should be operated only from the result in a risk of fire or electric shock. where they exit from the appliance.
type of power source indicated on Ventilation: Slots and openings in Accessories: Do not place this video
the marking label. If you are not sure the cabinet are provided for ventila- product on an unstable cart, stand,
of the type of power supply to your tion, to ensure reliable operation of tripod, bracket, or table. The video
home, consult your appliance dealer the video product and to protect it product may fall, causing serious inor local power company. For video from overheating, and these open- jury to a child or adult, and serious
products intended to operate from ings must not be blocked or cov- damage to the appliance. Use only
battery power, or other sources, refer ered. The openings should never with a cart, stand, tripod, bracket, or
to the operating instructions.
be blocked by placing the video table recommended by the manufacGrounding or Polarization: This video product on a bed, sofa, rug, or other turer, or sold with the video product.
Any mounting of the appliance should
product is equipped with a polar- similar surface.
ized alternating-current line plug (a This video product should not be follow the manufacturer’s instructions,
plug having one blade wider than placed in a built-in installation such and should use a mounting accessory
the other). This plug will fit into the as a bookcase or rack unless proper recommended by the manufacturer.
power outlet only one way. This is a ventilation is provided or the manu- An appliance and
safety feature. If you are unable to facturer’s instructions have been ad- cart combination
insert the plug fully into the outlet, hered to. This video product should should be moved
try reversing the plug. If the plug never be placed near or over a radia- with care. Quick
should still fail to fit, contact your tor or heat register.
stops, excessive
electrician to replace your obsolete
force, and uneven
outlet. Do not defeat the safety pur- Attachments: Do not use attachments surfaces
may
not recommended by the video
pose of the polarized plug.
cause the appliance and cart combiproduct manufacturer as they may
nation to overturn.
cause hazards.

ii

Antennas
Outdoor Antenna Grounding: If an
outside antenna or cable system is
connected to the video product, be
sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Section 810
of the National Electrical Code, ANSI/
NFPA No. 70, provides information
with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps

Antenna Lead
in Wire
Antenna
Discharge
Unit (NEC
SECTION
810-20)

Grounding
Power Service Grounding Conductors
Electrode System (NEC (NEC SECTION
810-21)
ART 250. PART H)

Power Lines: An outside antenna system should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,

For Your Safety
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits
as contact with them might be fatal.
Use
Cleaning: Unplug this video product
from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage points
or short out parts that could result in a
fire or electric shock. Never spill liquid
of any kind on the video product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna
or cable system. This will prevent
damage to the video product due to
lightning and power-line surges.

and refer servicing to qualified service personnel under the following
conditions:
• When the power-supply cord or
plug is damaged.
• If liquid has been spilled, or objects
have fallen into the video product.
• If the video product has been exposed to rain or water.
• If the video product has been
dropped or the cabinet has been
damaged.
If the video product does not operate normally follow the operating
instructions.
Adjust only those
controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the video product to
its normal operation.

Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these safety notes and
your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.

WARNING

CAUTION

This icon indicates that personal injury or material damage can result if the
information is ignored.

The icons shown below are used to indicate the nature of the instructions
which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).

When the video product exhibits a
distinct change in performance—
this indicates a need for service.

Replacement Parts: When replacement
parts are required, be sure the service
technician has used replacement
parts specified by the manufacturer
or have the same characteristics as
Service
the original part. Unauthorized subServicing: Do not attempt to service
stitutions may result in fire, electric
this video product yourself as openshock or other hazards.
ing or removing covers may expose
you to dangerous voltage or other Safety Check: Upon completion of any
hazards. Refer all servicing to quali- service or repairs to this video prodfied service personnel.
uct, ask the service technician to
perform safety checks to determine
Damage Requiring Service: Unplug this
that the video product is in proper
video product from the wall outlet
operating condition.

This icon indicates that death or serious injury can result if the information
is ignored.

Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed (“Required”).

WARNING
Unplug from
power socket

If a problem arises, turn the camera off, remove the batteries, and disconnect and unplug
the AC power adapter. Continued use of the camera when it is emitting smoke,
is emitting any unusual odor, or is in any other abnormal state can cause a fire
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water or foreign objects
get inside the camera, turn the camera off, remove the batteries, and disconnect and unplug the AC power adapter. Continued use of the camera can
cause a fire or electric shock. Contact your FUJIFILM dealer.

iii

For Your Safety
WARNING
Do not use in
the bathroom
or shower

Do not
disassemble

Do not use the camera in the bathroom or shower. This can cause a fire or electric
shock.
Never attempt to change or take apart the camera. (Never open the casing.) Do not use the
camera when it has been dropped or the casing is damaged. This can cause a fire or
electric shock. Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a
fire or electric shock. If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the camera to fall or
tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the camera while you
are walking or driving a vehicle. This can result in you falling down or being
involved in a traffic accident.

iv

CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This
can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave
the camera in locations such as a sealed vehicle or in direct sunlight. This
can cause a fire.
Keep out of the reach of small children. This product could cause injury in the
hands of a child.
Do not place heavy objects on the camera. This can cause the heavy object to tip
over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on the
connection cord to disconnect the AC power adapter. This can damage the power
cord or cables and cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can
cause heat to build up and distort the casing or cause a fire.

Do not touch any metal parts of the camera during a thunderstorm. This can cause an
electric shock due to induced current from the lightning discharge.

When you are cleaning the camera or you do not plan to use the camera for an extended
period, remove the batteries and disconnect and unplug the AC power adapter. Failure to
do so can cause a fire or electric shock.

Do not use the batteries except as specified. Load the batteries as shown by the
indicator.

When charging ends, unplug the charger from the power socket. Leaving the charger
plugged into the power socket can cause a fire.

Do not heat, change or take apart the batteries. Do not drop or subject the batteries to
impacts. Do not store the batteries with metallic products. Any of these actions can
cause the batteries to burst or leak and cause fire or injury as a result.
Use only the batteries or AC power adapters specified for use with this camera. Do not use
voltages other than the power supply voltage shown. The use of other power sources
can cause a fire.
If the batteries leak and fluid gets in contact with your eyes, skin or clothing, flush the
affected area with clean water and seek medical attention or call an emergency number
right away.
When carrying the batteries, install them in a digital camera or keep them in the hard case.
When storing the batteries, keep them in the hard case. When discarding, cover the battery
terminals with insulation tape. Contact with other metallic objects or batteries
could cause the batteries to ignite or burst.
Keep memory cards out of the reach of small children. Because memory cards are
small, they can be swallowed by children. Be sure to store memory cards out
of the reach of small children. If a child swallows a memory card, seek medical
attention or call an emergency number.

Using a flash too close to a person’s eyes may temporarily affect the eyesight. Take particular care when photographing infants and young children.
When a memory card is removed, the card could come out of the slot too quickly. Use your
finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera. Build-up of dust in your
camera can cause a fire or electric shock. Contact your FUJIFILM dealer to
request internal cleaning every two years. Please note that this service is not
free of charge.

Using Batteries
The following describes the proper use of batteries and how to prolong
their life. Incorrect use can shorten battery life or cause leakage, overheating, fire, or explosion.
Compatible Batteries
The camera takes AA alkaline, rechargeable Ni-MH (nickel-metal hydride),
or UL-certified lithium batteries. Do not use manganese, nickel-cadmium
(Ni-Cd), or non-UL certified lithium batteries, as the heat generated by these
batteries could damage the camera or cause malfunction.

For Your Safety
Battery capacity varies with make
the camera off and allow the batand storage conditions. Some comteries to cool before handling.
mercially-available batteries may • Battery capacity tends to decrease
have less capacity than the batteries
at low temperatures. Keep spare
provided with the camera.
batteries in a pocket or other warm
place and exchange as necessary.
Cautions: Handling Batteries
Cold batteries may recover some
• Do not use batteries that are leaking,
of their charge when warmed.
deformed, or discolored. Warning: If
• Fingerprints and other foreign
the batteries leak, clean the battery
matter on the battery terminals
compartment thoroughly before incan reduce battery performance.
serting new batteries. If fluid from
Thoroughly clean the terminals
the battery comes into contact with
with a soft, dry cloth before insertskin or clothing, flush the affected
ing the batteries in the camera.
area with water. If fluid enters your eyes,
immediately flush the affected area with Ni-MH Batteries
water and seek medical attention. Do not The capacity of Ni-MH batteries may
rub your eyes. Failure to observe this pre- be temporarily reduced when new,
caution could result in loss of eyesight.
after long periods of disuse, or if they
• Do not transport or store with are repeatedly recharged before bemetal objects such as necklaces or ing fully discharged. This is normal
hairpins.
and does not indicate a malfunc• Do not disassemble or modify the tion. Capacity can be increased by
batteries or battery casing.
repeatedly discharging the batteries
• Do not expose to strong physical using the P DISCHARGE option
shocks.
in the camera setup menu (pg. 107)
• Do not expose to water, flame, or and recharging them using a battery
heat, or store in warm or humid charger (sold separately). Do not use
conditions.
this option with alkaline batteries.
• Keep out of reach of infants and
The camera draws a small amount of
small children.
current even when off. Ni-MH batter• Insert in the correct orientation.
ies that have been left in the camera
• Do not mix old and new batteries,
for an extended period may be drawn
batteries with different charge levdown to the point that they no longer
els, or batteries of different types.
hold a charge. Battery performance
• If the camera will not be used for
may also drop if the batteries are run
an extended period, remove the
down in a device such as a flashlight.
batteries. Note that the camera
Use the P DISCHARGE option in the
clock will be reset (pg. 14).
camera setup menu to discharge Ni• The batteries may be warm to the
MH batteries. Batteries that no lontouch immediately after use. Turn

ger hold a charge even after repeatUsing the Camera
edly being discharged and recharged To ensure that images are recorded
have reached the end of their service correctly, do not subject the camera
life and must be replaced.
to impact or physical shocks while
Ni-MH batteries can be recharged in images are being recorded.
a battery charger (sold separately).
Batteries may become warm to the
touch after charging. Refer to the instructions provided with the charger
for more information. Use the charger with compatible batteries only.

Electrical Interference
This camera may interfere with hospital
or aviation equipment. Consult with
hospital or airline staff before using the
camera in a hospital or on an aircraft.

Liquid Crystal
Ni-MH batteries gradually lose their In the event that the monitor or electronic viewfinder is damaged, care
charge when not in use.
should be taken to avoid contact
Disposal
with liquid crystal. Take the urgent
Dispose of used batteries in accord action indicated should any of the
with local regulations.
following situations arise:
• If liquid crystal comes in contact with
AC Adapters (Available Separately)
your skin, clean the area with a cloth
Use only FUJIFILM AC adapters desigand then wash thoroughly with
nated for use with this camera. Other
soap and running water.
adapters could damage the camera.
•
If liquid crystal enters your eyes, flush
• The AC adapter is for indoor use only.
the affected eye with clean water
• Be sure the DC plug is securely
for at least 15 minutes and then
connected to the camera.
seek medical assistance.
• Turn the camera off before discon• If liquid crystal is swallowed, rinse
necting the adapter. Disconnect the
your mouth thoroughly with water.
adapter by the plug, not the cable.
Drink large quantities of water and
• Do not use with other devices.
induce vomiting, then seek medi• Do not disassemble.
cal assistance.
• Do not expose to high heat and
Take Test Shots
humidity.
• Do not subject to strong physical Before taking photographs on important occasions (such as at weddings
shocks.
• The AC adapter may hum or be- or before taking the camera on a trip),
come hot to the touch during use. take a test shot and view the result to
ensure that the camera is functionThis is normal.
• If the AC adapter causes radio in- ing normally. FUJIFILM Corporation
terference, reorient or relocate the can not accept liability for damages
or lost profits incurred as a result of
receiving antenna.
product malfunction.

v

For Your Safety

NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.

For Customers in Canada
Please read the “Safety Notes” (pages iii–v) and make sure you understand CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
them before using the camera.
EC Declaration of Conformity
Perchlorate Material—special handling may apply. See http://www.dtsc. We
Name:
FUJIFILM Electronic Imaging Europe GmbH
ca.gov/hazardouswaste/perchlorate.
Address:
Benzstrasse 2
For Customers in the U.S.A.
47533 Kleve, Germany
Tested To Comply With FCC Standards
declare that the product
FOR HOME OR OFFICE USE
Product Name:
FUJIFILM DIGITAL CAMERA FinePix S2000HD
Manufacturer’s Name: FUJIFILM Corporation
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO,
107-0052 JAPAN
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including conforms to the following Standards:
Safety:
EN60065: 2002 + A1
interference that may cause undesired operation.
EMC:
EN55022: 1998 + A1: 2000 + A2: 2003 Class B
CAUTION
EN55024: 1998 + A1: 2001 + A2: 2003
This equipment has been tested and found to comply with the limits for a
EN61000-3-2: 2000 + A2: 2005
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
EN61000-3-3: 1995 + A1: 2001 + A2: 2003
designed to provide reasonable protection against harmful interference in
following the provision of the EMC Directive (2004/108/EC) and Low Volta residential installation. This equipment generates, uses, and can radiate
age Directive (2006/95/EC).
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
Kleve, Germany
August 1, 2008
off and on, the user is encouraged to try to correct the interference by one
Place
Date
Signature, Managing Director
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved
in this manual could void the user’s authority to operate the equipment.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a
Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.

vi

For Your Safety
Notes on Copyright
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Used Electrical and Electronic Equipment (Applicable in the European Unless intended solely for personal use, images recorded using your digital
camera system cannot be used in ways that infringe copyright laws withUnion, Norway, Iceland and Liechtenstein)
out the consent of the owner. Note that some restrictions apply to the
This symbol on the product, or in the manual and in the photographing of stage performances, entertainments, and exhibits, even
warranty, and/or on its packaging indicates that this prod- when intended purely for personal use. Users are also asked to note that
uct shall not be treated as household waste.
the transfer of memory cards containing images or data protected under
Instead it should be taken to an applicable collection point copyright laws is only permissible within the restrictions imposed by those
copyright laws.
for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will Trademark Information
help prevent potential negative consequences to the en- xD-Picture Card is a trademark of FUJIFILM Corporation. Macintosh, Power
vironment and human health, which could otherwise be Macintosh, Power Mac, PowerBook, QuickTime, and Mac OS are trademarks
caused by inappropriate waste handling of this product.
of Apple Inc. in the U.S.A. and other countries. Microsoft, Windows, the Windows logo, Windows Vista and the Windows Vista logo are trademarks or
This symbol on the batteries or accumulators indicates that
registered trademarks of Microsoft Corporation in the United States and/or
those batteries shall not be treated as Household waste.
other countries. “Windows” is an abbreviation used in reference to the MiIf your equipment contains easy removable batteries or ac- crosoft Windows operating system. Adobe and Adobe Reader are either
cumulators please dispose these separately according to trademarks or registered trademarks of Adobe Systems Incorporated in the
your local requirements.
U.S.A. and/or other countries. The SDHC logo is a trademark.
The recycling of materials will help to conserve natural resources. For more Note: The “Designed for Microsoft® Windows® XP” and “CERTIFIED FOR Windows
detailed information about recycling this product, please contact your local Vista™” logos apply only to the camera and camera hardware driver.
city office, your household waste disposal service or the shop where you
purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein:
If you wish to discard this product including the batteries or accumulators, please contact your local authorities and ask for the correct way of
disposal.

vii

About This Manual
Before using the camera, read this manual and the warnings on pages ii–vii. For information on specific
topics, consult the sources below.
✔ Camera Q & A ....................................................pg.
.................................................... pg. ix
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”

✔ Table of Contents .............................................pg.
............................................. pg. xii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.

✔ Troubleshooting ............................................ pg. 111
Having a specific problem with the camera?
Find the answer here.

✔ Warning Messages and Displays ..................... pg. 118
Find out what’s behind that flashing icon or error message in the monitor or electronic viewfinder.

✔ Glossary ........................................................pg.
........................................................ pg. 122
The meanings of some technical terms may be
found here.

Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 10.

viii

Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the display from turning off automatically?
How do I make the display brighter or darker?
How do I stop the camera beeping and clicking?
Can I change the sound the shutter makes?
What are the parts of the camera called?
What do the icons in the display mean?
How do I use the menus?
What’s behind that flashing icon or error message?
How much charge is left in the battery?
Can I increase the capacity of rechargeable Ni-MH batteries?

Key phrase
See page
Date and time
14
Time difference
106
Auto power off
105
LCD brightness
104
Operation and shutter volume
101
Silent mode
20
Shutter sound
101
Parts of the camera
2
Displays
4
Menus
72
Messages and displays
118
Battery level
16
Discharge
107

Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?

Key phrase
See page
Printing pictures
61
Viewing pictures on a computer
66

ix

Camera Q & A

Taking Pictures
Question
How many pictures can I take?
Is there a quick and easy way to take snapshots?
How can I avoid blurred pictures?
How can I make good portraits?
Is there a simple way to adjust settings for different scenes?
How do I shoot close-ups?
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst?
How do I take a group portrait that includes the photographer?
Can I take pictures by remote control?
How do I turn off the lamp on the front of the camera?
How do I frame pictures with the subject off to one side?
Can I choose shutter speed and aperture?
Can I save and recall camera settings?
How do I adjust exposure?
How do I shoot movies?
How do I frame pictures in the viewfinder?

x

Key phrase
Memory capacity
A mode
Dual IS mode
Intelligent Face Detection
Scene position
Close-ups (macro mode)

See page
124
16
86
22
38
27

Flash mode

28

Burst mode
Self-timer mode
Remote control (sold separately)
AF-assist illuminator
Focus lock
P, S, and M modes
C mode
Exposure compensation
Recording movies
EVF/LCD button

30
79
108
26
24
42
46
34
55
5

Camera Q & A

Viewing Pictures
Question
How do I view my pictures?
How do I view pictures of only one type?
How do I get rid of unwanted pictures?
How do I delete a lot of pictures at once?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I view all pictures taken on the same day?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the display when viewing my pictures?
Can I view my pictures in a slide show?
Can I add a short voice memo to my pictures?
Can I crop unwanted elements out of my pictures?
Can I copy pictures from internal memory to a memory card?
How do I view pictures on a High Definition device?
How do I view my pictures on TV?

Key phrase
Single-frame playback
Choose type
Deleting pictures
Erase
Playback zoom
Multi-frame playback
Sort by date
Protect
Choosing a display format
Slide show
Voice memo
Crop
Copy
HDTV kit (sold separately)
Viewing pictures on TV

See page
47
99
53
54
48
50
52
93
47
88
96
98
94
108
59

xi

Table of Contents
For Your Safety ................................................................................. ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
Safety Notes .................................................................................... iii
NOTICES ............................................................................................ vi
About This Manual .......................................................................viii
Camera Q & A .................................................................................... ix

Before You Begi
Begin
n
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
Camera Displays .......................................................................... 4
The Mode Dial .............................................................................. 6

First Steps
Steps
The Strap and Lens Cap ................................................................ 7
Inserting the Batteries .................................................................. 8
Inserting a Memory Card ...........................................................10
Turning the Camera on and Off...............................................13
Shooting Mode .............................................................................13
Playback Mode ..............................................................................13
Basic Setup .......................................................................................14

Basic Photography and Playbac
Playback
k
Taking Pictures in A (Auto) Mode .................................16
Viewing Pictures ............................................................................21

xii

More on Photography
Photography
Intelligent Face Detection and Red-Eye Removal ..........22
Focus Lock ........................................................................................24
e Close-ups (Macro and Super Macro Modes) ...............27
l Using the Flash (Intelligent Flash).....................................28
p Burst Mode (Continuous Shooting) ................................30
c Instant Zoom (Zoom Framing) .........................................32
d Exposure Compensation.....................................................34
Shooting Mode ...............................................................................36
A AUTO ...................................................................................36
E ANTI-BLUR (Picture Stabilization) ..................................36
D NATURAL LIGHT ....................................................................36
C NATURAL & l .......................................................................36
B ZOOM BRACKETING ...........................................................37
SP SCENE POSITION ....................................................................38
P, S, and M Modes ........................................................................42
C: CUSTOM ......................................................................................46

Table of Contents
More on Playbac
Playback
k

Menuss
Menu

Playback Options...........................................................................47
Playback Zoom..............................................................................48
Viewing Photo Information......................................................49
Multi-Frame Playback.................................................................50
Pictures Taken in a Single Burst ..............................................51
Sort by Date....................................................................................52
A Deleting Pictures ....................................................................53

Using the Menus: Shooting Mode .........................................72
Using the f-Mode Menu..........................................................72
f-Mode Menu Options.............................................................73
N ISO ............................................................................................74
O QUALITY .................................................................................75
P g COLOR...............................................................76
Using the Shooting Menu.........................................................77
Shooting Menu Options ............................................................78
B SELF-TIMER............................................................................79
C PHOTOMETRY ......................................................................80
D WHITE BALANCE .................................................................81
E HIGH-SPEED SHOOTING ..................................................83
F FOCUSING .............................................................................83
G AF MODE................................................................................84
H SHARPENING ........................................................................85
I FLASH......................................................................................85
J BRACKETING.........................................................................86
L DUAL IS MODE .....................................................................86

Moviess
Movie
F Recording Movies ...................................................................55
a Viewing Movies .......................................................................58

Connectionss
Connection
Viewing Pictures on TV ...............................................................59
Printing Pictures via USB ...........................................................61
Connecting the Camera ............................................................61
Printing Selected Pictures ........................................................61
Printing the DPOF Print Order ................................................62
Creating a DPOF Print Order ....................................................64
Viewing Pictures on a Computer............................................66
Installing FinePixViewer ............................................................66
Connecting the Camera ............................................................70

xiii

Table of Contents
Using the Menus: Playback Mode ..........................................87
Using the f-Mode Menu..........................................................87
f-Mode Menu Options.............................................................87
I SLIDE SHOW .........................................................................88
J DISPLAY MODE ....................................................................88
Using the Playback Menu .........................................................89
Playback Menu Options.............................................................90
B RED EYE REMOVAL .............................................................90
L MOVIE TRIMMING...............................................................91
C IMAGE ROTATE .....................................................................92
D PROTECT ................................................................................93
E COPY........................................................................................94
F VOICE MEMO ........................................................................96
G TRIMMING .............................................................................98
H CHOOSE TYPE ......................................................................99
The Setup Menu .......................................................................... 100
Using the Setup Menu ............................................................ 100
Setup Menu Options.................................................................101
A IMAGE DISP. ....................................................................... 102
B FRAME NO. ......................................................................... 103
D DIGITAL ZOOM ................................................................. 104
I PLAYBACK VOLUME ........................................................ 104
J LCD BRIGHTNESS ............................................................. 104
K FORMAT............................................................................... 105
M AUTO POWER OFF ........................................................... 105
N TIME DIFFERENCE ............................................................ 106
P DISCHARGE (Ni-MH Batteries Only) ......................... 107

xiv

Technical Note
Notess
Optional Accessories ................................................................ 108
Accessories from Fujifilm ....................................................... 109
Caring for the Camera ...............................................................110

Troubleshooting
Troubleshootin
g
Troubleshooting .......................................................................... 111
Warning Messages and Displays ..........................................118

Appendix
Appendi
x
Glossary ...........................................................................................122
Flash Mode and Shooting Mode ..........................................123
Internal Memory/Memory Card Capacity ........................124
Specifications ................................................................................125
FUJIFILM Digital Camera Worldwide Network ..............130

Introduction
Symbols and Conventions

Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.

Before You Begin

The following symbols are used in this manual:
3 Caution: This information should be read before use to ensure correct operation.
1 Note: Points to note when using the camera.
2 Tip: Additional information that may be helpful when using the camera.

Supplied Accessories
The following items are included with the camera:

AA alkaline (LR6) batteries
(×4)

Strap

USB cable

Lens cap

A/V cable

Owner’s Manual
(this manual)

FinePix software CD (IMPORTANT: read license agreement on the last page of this
manual before opening)

1

Introduction

Parts of the Camera
For more information, refer to the page listed to the right of each item.

1
2
3
4
5

Strap eyelet .................................................... 7 7 Mode dial ........................................................ 6 13 Terminal cover............................................59
Zoom control.......................................17, 48 8 AF-assist illuminator ...............................26 14 Microphone .................................................96
Self-timer lamp ..........................................79 15 Lens ...................................................................13
Shutter button ...........................................19
G switch ..........................................13 9 Receiver for remote control ...........108 16 Connector for A/V cable .....................59
10 Flash..................................................................28
Connector for USB cable .....................70
g (Intelligent Face Detection/
red-eye removal) button ....................22 11 l (flash pop-up) button......................28 17 Connector for High Definition
(HD) devices ................................................59
6 p (burst mode) button ......................30 12 Speaker ...........................................................97

2

Introduction
Electronic viewfinder .................... 5
Indicator lamp ................................. 20
Monitor ................................................... 4
DISP (display)/
BACK button................................18, 47
22 d (Exposure compensation)
button .................................................. 34
23 Tripod mount
24 Battery-chamber latch.................. 8

25 Battery-chamber cover ................ 8
26 EVF/LCD (display selection)
button ..................................................... 5
27 a (playback) button ..................47
28 f (photo mode) button.......... 72
29 Selector button (see below)
30 Memory card slot cover .............11
31 Memory card slot ...........................11

Before You Begin

18
19
20
21

The Selector Button
Move cursor up
b (delete) button (pg. 21)
Move cursor left
e (macro) button
(pg. 27)

MENU/OK button (pg. 14)
Move cursor right
l (flash) button
(pg. 28)

Move cursor down
c (instant zoom) button (pg. 32)

3

Introduction

Camera Displays
The following indicators may appear during shooting and playback:
■ Shooting
P

ISO AUTO (800)

1
2
3
4
5

N 9

12/31/2050 10 : 00 AM
SET
250
F3.5

*

6
7
8
* a: indicates that no memory card is inserted 9
and that pictures will be stored in the camera’s
10
internal memory (pg. 10).
11
12

Sensitivity ............................................74
White balance ..................................81
Flash mode.........................................28
Silent mode ...................................... 20
Intelligent Face Detection
indicator .............................................. 22
Dual IS mode ................................... 86
Shooting mode .............................. 36
Battery level .......................................16
Macro (close-up) mode..............27
High-speed mode ........................ 83
Burst mode ....................................... 30
Self-timer indicator .......................79

13
14
15
16
17
18
19
20
21
22
23
24

Date and time...................................14
Shutter speed and aperture ...43
Quality ...........................................55, 75
Number of exposures
remaining ......................................... 124
FinePix color ......................................76
Focus mode...................................... 83
Blur warning ..................................... 86
Metering ............................................. 80
Focus frame .......................................19
Internal memory indicator * .....10
Exposure compensation
indicator ...............................................45
Exposure indicator ........................45

■ Playback
100-0001
N
21/30

12/31/2050

4

10 : 00 AM

1
2
3
4

Protected image .............................93 6 Playback mode indicator ..........47
DPOF print indicator ................... 64 7 Voice memo indicator................ 96
Red-eye removal indicator ..... 90 8 Gift image ...........................................47
Intelligent Face Detection
9 Frame number ..............................103
indicator .............................................. 22 10 Current frame/
5 Silent mode indicator................. 20
number of frames in burst .......51

Introduction

EVF

Before You Begin

The Electronic Viewfinder (EVF)
The electronic viewfinder provides the same information as the monitor, and can be used when bright lighting conditions make the display in the monitor difficult to see. To switch between the monitor and electronic
viewfinder, press the EVF/LCD button (your selection remains in effect when the camera is turned off or the mode
dial is rotated to another setting).

LCD

5

Introduction

The Mode Dial
To select a shooting mode, align the mode icon with the mark next to the mode
dial.
P, S, M: Select for full control over camera
settings, including aperture (M) and/or
shutter speed (M and S; pg. 42).
A (AUTO): A simple “point-and-shoot”
mode recommended for first-time users
of digital cameras (pg. 36).
E (ANTI-BLUR): High shutter speeds reduce blur caused by subject movement
or camera shake (pg. 36).
D (NATURAL LIGHT): Capture natural light
indoors, under low light, or where the
flash can not be used.

C (CUSTOM): Recall stored settings for
modes P, S, and M.
F (MOVIE): Record short MPEG-4 movies
with sound (pg. 55).
SP (SCENE POSITION): Choose a scene suited to the subject or shooting conditions
and let the camera do the rest (pg. 38).
B (ZOOM BRACKETING): Take three pictures
each time the shutter button is pressed.
The first picture will be taken at the current zoom ratio, the second at 1.4 × digital
zoom, the third at 2 × digital zoom.

C (NATURAL & l): Helps ensure good results in situations
with difficult lighting. Each time the shutter button is
pressed, the camera takes two shots: one shot without the
flash to preserve natural lighting, followed immediately by a
second shot with the flash.

6

The Strap and Lens Cap
Attaching the Strap
Attach the strap to the two strap eyelets as shown
below.
q

The Lens Cap
Attach the lens cap as shown.

w

First Steps

e

To avoid losing the lens cap, pass the supplied
string through the eyelet (q) and secure the lens
cap to the strap (w).
q

w

3 Caution
To avoid dropping the camera, be sure the strap is correctly secured.

7

Inserting the Batteries
The camera takes four AA alkaline, lithium, or rechargeable Ni-MH batteries. A set of four alkaline batteries is supplied with the camera. Insert the batteries in the camera as described below.
the battery-chamber cover.
1 Open
Slide the battery-chamber latch in the direction
shown and open the battery-chamber cover.

orientation shown by the
“+“ and “–“ marks inside
the battery chamber.

1 Note
Be sure the camera is off before opening the battery-chamber cover.

3 Cautions
• Insert the batteries in the correct orientation.
• Never use batteries with peelBattery casing
ing or damaged casing or mix
old and new batteries, batteries with different charge levels,
or batteries of different types.
Failure to observe these
precautions could result
in the batteries leaking or
overheating.
• Never use manganese or Ni-Cd batteries.
• The capacity of alkaline batteries varies with the
manufacturer and drops at temperatures below
10 °C/32 °F; Ni-MH batteries are recommended.
• Fingerprints and other soil on the battery terminals can shorten battery life.

3 Cautions
• Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could result in damage to image files or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.

8

Insert the batteries.
2 Insert
the batteries in the

Inserting the Batteries

the battery-chamber cover.
3 Close
Close the battery-cham-

3 Caution
Do not use force. If the battery-chamber cover
does not close, check that the batteries are in the
correct orientation and try again.

First Steps

ber cover and slide it in
until the latch clicks into
place.

Choosing the Battery Type
After replacing the batteries SET-UP
with batteries of a different
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
type, select the battery type
ALKALINE
BACKGROUND COLOR
NI-MH
BATTERY TYPE
using the T BATTERY TYPE
LITHIUM
DISCHARGE
option in the setup menu (pg.
101) to ensure that the battery level is displayed correctly and the camera does not turn off unexpectedly.
The current battery type is displayed the first time the
camera is turned on after batteries are replaced.

9

Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can be
used to store additional pictures.
When no memory card is inserted, a appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become corrupted, the pictures in internal memory should periodically be transferred to a computer and saved on
the computer hard disk or on removable media such as CDs or DVDs. The pictures in internal memory
can also be copied to a memory card (see page 94). To prevent internal memory from becoming full,
be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/
index.html. Operation is not guaranteed with other cards. The camera can not be used with multimedia or xD-Picture cards.
3 Caution
Memory cards can be locked, making it impossible to format the card or to record or delete
images. Before inserting a memory card, slide the write-protect switch to the unlocked position.
Write-protect
switch

10

Inserting a Memory Card

■ Inserting a Memory Card
Open the memory card slot cover.

1

3 Close the memory card slot cover.

the memory card.
2 Insert
Holding the memory card in the orientation
shown below, slide it all the way in.

First Steps

1 Note
Be sure the camera is off before opening the memory
card slot cover.

Removing Memory Cards
After confirming that the camera is off, press the card
in and then release it slowly. The card can now be
removed by hand.

Gold contacts
Be sure card is in correct
orientation; do not insert
at an angle or use force.

3 Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after being removed from the camera. This is normal and
does not indicate a malfunction.

11

Inserting a Memory Card
3 Cautions
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or
deleted from the card. Failure to observe this precaution could damage the card.
• Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 105.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe
this precaution may cause damage or malfunction. Adapters that are larger or smaller than
the standard dimensions of an SD card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of memory card.
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do
not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always
use the camera to delete pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.

12

Turning the Camera on and Off
Playback Mode

Slide the G switch in the direction shown
below. The lens will extend automatically.

To turn the camera on and begin playback, press
the a button for about a second.

Slide the G switch to turn the camera off.

Press the a button again to turn the camera off.

2 Tip: Switching to Playback Mode
Press the a button to start playback. Press the shutter
button halfway to return to shooting mode.

2 Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the a button to return to playback.

First Steps

Shooting Mode

3 Cautions
• Forcibly preventing the lens from extending could
cause damage or product malfunction.
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.

2 Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the AUTO
POWER OFF menu (see page 105). To turn the camera on, use the G switch or press the a button for
about a second.
13

Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 100).

1 Choose a language.

2 Set the date and time.
DATE / TIME NOT SET

START MENU

2010
2009
MM/DD/YY

1/ 1

2008

2007
2006
SET

NO

1.1 Press the selector up, down,
left, or right to highlight a language.
1.2 Press MENU/OK.

SET

NO

2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the order in which the year, month, and day are
displayed, highlight the date format and
press the selector up or down.
2.2 Press MENU/OK.

14

12 : 00
AM

Basic Setup

3 Choose power management options.
POWER MANAGEMENT
POWER SAVE
CLEAR LCD DISPLAY
Power saving for longer
battery life
NO

3.1 Press the selector up or down
to highlight one of the following options:
• POWER SAVE: Save battery power.
• CLEAR LCD DISPLAY: Intelligent Face Detection (pg. 22) turns on and EVF/LCD
MODE (pg. 101) is set to 60 fps for improved display quality.

If the batteries are removed for an extended period, the
camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
If the batteries are left in the camera or an optional AC
adapter connected for about 10 hours, the battery can
be removed for about 24 hours without resetting the
clock, language selection, or power management options.

First Steps

SET

2 Tip: The Camera Clock

3.2 Press MENU/OK.

15

Taking Pictures in A (Auto) Mode
This section describes how to take pictures in A (auto) mode.
the camera on.
1 Turn
Slide the G switch to turn the camera

the battery level.
3 Check
Check the battery level in the display.

on.
q

Basic Photography and Playback

A mode.
2 Select
Rotate the mode dial to A.

w

Indicator
Description
NO ICON
Batteries are partially discharged.
q o (red) Batteries are low. Replace as soon
as possible.
n
Batteries are exhausted. Turn camw
(blinks red) era off and replace batteries.

1 Note
A battery warning may not be displayed before the camera turns off, particularly if batteries are reused after
having once been exhausted. Power consumption varies greatly from mode to mode; the low battery warning
(o) may not be displayed or may be displayed only briefly before the camera turns off in some modes or when
switching from shooting to playback mode.

16

Taking Pictures in A (Auto) Mode

the picture.
4 Frame
Position the main subject in the focus frame
and use the zoom control to frame the picture in the display.
Select W to zoom out
AUTO

Select T to zoom in

Holding the Camera
Hold the camera steady with
both hands and brace your elbows against your sides. Shaking or unsteady hands can blur
your shots.

AUTO

Zoom indicator

Zoom in up to 15 × using
optical zoom, or use digital
zoom (pg. 104) to zoom in
closer.

Basic Photography and Playback

To prevent pictures that are out
of focus or too dark (underexposed), keep your fingers and
other objects away from the lens
and flash.

2 Tip: Focus Lock
Use focus lock (pg. 24) to focus on subjects that are not in the focus frame.

17

Taking Pictures in A (Auto) Mode
The Framing Grid and Post-Shot Assist Window
To choose the shooting information and guides displayed, press the DISP/BACK button.
Indicators hidden

Framing grid
AUTO

Indicators displayed
AUTO

AUTO

Post-shot assist
HD frame
window
• Framing grid: To use the framing grid, position the main subject at the intersection of two lines or align one of
the horizontal lines with the horizon. Use focus lock (pg. 24) to focus on subjects that will not be in the center
of the frame in the final photograph.
• HD frame: Displays the High Definition (HD) 16 : 9 crop. Not displayed in B mode or zoom framing.
• Post-shot assist window: The previous three pictures are displayed on the left, with the most recent picture at the
bottom. Use for reference when taking multiple pictures of the same subject.

18

Taking Pictures in A (Auto) Mode

Focus.
5 Press
the shutter button halfway to focus on
the main subject in the focus frame.
Press
halfway

AUTO

F3.5

Camera selects small focus
frame and focuses on subject

1 Note
The lens may make a noise when the camera focuses. This is normal.

If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the
indicator lamp will blink green. Change the
composition or use focus lock (pg. 24).

the rest of the way down to take
the picture.
2 Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway (q) sets focus and exposure;
to shoot, press the shutter button the rest of the way
down (w).
Double
beep
q

Press halfway

Click
w

Press the rest of
the way down

1 Note
If the subject is poorly lit, the AF-assist illuminator may
light to assist focus (pg. 26). For information on using
the flash when lighting is poor, see page 28.

Basic Photography and Playback

250

Focus frame

Shoot.
6 Smoothly
press the shutter button

19

Taking Pictures in A (Auto) Mode
h Silent Mode
In situations in which camera sounds or lights may
be unwelcome, press the DISP/BACK button until h is
displayed (note that silent mode is not available during movie or voice memo playback).
AUTO

The Indicator Lamp
Indicator
lamp

N 9
ISO AUTO (800)

The camera speaker and AF-assist illuminator/selftimer lamp turn off and volume (pg. 104) can not be
adjusted. To restore normal operation, press the DISP/
BACK button until the h icon is no longer displayed.

The indicator lamp shows camera status as follows:
Indicator lamp
Camera status
Glows green Focus locked.
Blur, focus, or exposure warning. PicBlinks green
ture can be taken.
Blinks green Recording pictures. Additional picand orange tures can be taken.
Glows
Recording pictures. No additional picorange
tures can be taken at this time.
Flash charging; flash will not fire when
Blinks orange
picture is taken.
Lens or memory error (internal memory
Blinks red or memory card full or not formatted,
format error, or other memory error).
2 Tip: Warnings
Detailed warnings appear in the display. See pages
118–121 for more information.

20

Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.

1 Press the a button.

Deleting Pictures
To delete the picture currently displayed
in the monitor, press the selector up (b).
The following dialog will be displayed.

The most recent picture will be displayed in
the monitor.
100-0001
N

12/31/2050

OK

CANCEL

SET

To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture, highlight CANCEL and press MENU/OK.

10 : 00 AM

additional pictures.
2 View
Press the selector right to view

2 Tip: The Playback Menu
Pictures can also be deleted from the playback menu
(pg. 53).

Basic Photography and Playback

ERASE OK?

pictures in the order recorded, left
to view pictures in reverse order.
Press the shutter button to exit to shooting
mode.
21

Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group
portraits to prevent the camera from focusing on the background. It can be used in tall and wide
orientations and is available in A, E, D, C, B, SP (L, O, Q, R, S, T, and U), P, S, M,
and C modes (pp. 36–46). Intelligent Face Detection also offers a red-eye removal option for removing
“red-eye” effects caused by the flash.
Intelligent Face Detection on.
1 Turn
Press the g button to cycle through settings as shown below.
More on Photography

AUTO

OFF

FACE DETECTION
REMOVAL OFF

Option
g OFF
g FACE DETECTION
h REMOVAL ON
g FACE DETECTION
h REMOVAL OFF

22

FACE DETECTION
REMOVAL ON

Description
Intelligent Face Detection and
red-eye removal off.
Intelligent Face Detection and
red-eye removal on. Use with
the flash.
Intelligent Face Detection on;
red-eye removal off.

the picture.
2 Frame
If a face is detected, it

AUTO

will be indicated by a
green border. If there is
more than one face in
the frame, the camera
Green border
will select the face closest to the center; other faces are indicated by
white borders.

Intelligent Face Detection and Red-Eye Removal

Focus.
3 Press
the shutter button halfway
to set focus and exposure for the
subject in the green border.
3 Caution
If no face is detected when the shutter button is
pressed halfway (pg. 113), the camera will focus
on the subject at the center of the display and
red-eye will not be removed.

way down to shoot.
3 Caution
If the subject moves as the shutter button is
pressed, their face may not be in the area indicated
by the green border when the picture is taken.

If g FACE DETECTION
h REMOVAL ON is
selected, the picture
will be processed to reduce red-eye before it is
recorded.

7

When a picture taken with Intelligent Face Detection is displayed, the camera can automatically select
faces for red-eye reduction (pg. 90), playback zoom
(pg. 48), slide shows (pg. 88), printing (pg. 64), and
cropping (pg. 98).

More on Photography

Shoot.
4 Press
the shutter button all the

Intelligent Face Detection
Intelligent Face Detection is
recommended when using
the self-timer for group- or
self-portraits (pg. 79).

REMOVING

23

Focus Lock
To compose photographs with off-center subjects:

1 Position the subject in the focus frame.
AUTO

the picture.
3 Recompose
Keeping the shutter button pressed halfway,
recompose the picture.
AUTO

Focus.
2 Press
the shutter button halfway to set focus and exposure. Focus and exposure will
remain locked while the shutter button is
pressed halfway (AF/AE lock).

250

F3.5

Shoot.
4 Press
the shutter-release button the rest of
the way down to take the picture.

AUTO

Press
halfway

250

F3.5

Repeat steps 1 and 2 as desired to refocus
before taking the picture.

24

Press the rest of
the way down

Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below. If the camera is unable to focus using autofocus, use manual focus (pg. 83) or use focus lock (pg. 24) to
focus on another subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).

More on Photography

•
•
•
•

25

Focus Lock
The AF-Assist Illuminator
If the subject is poorly lit, the AF-assist illuminator will light to assist the focus operation when the shutter button
is pressed halfway.
AF-assist
illuminator

1 Notes
• Avoid shining the AF-assist illuminator directly into your subject’s eyes. See page 101 for information on disabling the AF-assist illuminator.
• The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to
focus in macro mode (pg. 27), try increasing the distance to the subject.
• The AF-assist illuminator is not available in silent mode or in the following SP modes: M, N, P, Q , T, U, and
V.

26

e Close-ups (Macro and Super Macro Modes)
Macro mode can be used for close-ups in A, E, D, C, B, SP (T, V, and, W), P, S, M, and C
modes (pp. 36–46). Macro mode is automatically selected in V and W scene modes; to select macro
or super macro mode in other modes, press the selector left (e) to cycle through macro options as
shown below.
AUTO

Choose from e (macro mode),
f (super macro mode), or
g (macro mode off )

To exit macro mode, press the selector left (e) until g is displayed. Macro mode can also be cancelled
by turning the camera off or selecting another shooting mode.
1 Notes
• Use of a tripod is recommended to prevent blur caused by camera shake.
• Flash compensation may be required when using the flash (pg. 85).

More on Photography

When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures. In super macro mode, zoom can not be adjusted and the flash can
not be used. Super macro is not available in C, V, and W scene modes.

27

l Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes the scene based on
such factors as the brightness of the subject, its position in the frame, and its distance from the camera.
Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while
preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the flash
when lighting is poor, for example when shooting at night or indoors under low light.
the flash.
1 Raise
Press the flash pop-up button to raise the flash.
Turning the Flash Off
Lower the flash where flash photography is prohibited or to capture natural lighting
under dim light. At slow shutter speeds, k will be displayed to warn that pictures
may be blurred; use of a tripod is recommended.

a flash mode.
2 Choose
Press the selector right (l). The flash mode changes each time the selector is
pressed (some options are not available in all shooting modes; see pg. 123):
Mode
Description
AUTO (no icon) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
l (fill flash)
when shooting in bright light.
Capture both the main subject and the background under low light (note that brightly
m (slow sync) lit scenes may be overexposed). Shutter speed may be as slow as 3 s in O mode. Use a
tripod.

28

l Using the Flash (Intelligent Flash)

Focus.
3 Press
the shutter button halfway to focus. If the flash will fire, p will be displayed when
the shutter button is pressed halfway. At slow shutter speeds, k will appear in the
display to warn that pictures may be blurred; use of a tripod is recommended.
Shoot.
4 Press
the shutter button the rest of the way down to shoot.

Red-Eye Removal
When g FACE DETECTION h REMOVAL ON is selected for Intelligent Face Detection (pg. 22),
red-eye removal (h) is available in AUTO (i), fill flash (j), and slow sync (k) modes. Red-eye
removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas
as shown in the illustration at right.

More on Photography

3 Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.

29

p Burst Mode (Continuous Shooting)
Use burst mode to capture motion in a series of pictures.
a burst mode.
1 Choose
Press the p button. The burst mode changes each time the button is
pressed.
Mode
l
(top 33 4)
m
(top 33 2)
n
(long period)

o
(bracketing)
p
(top 3)
OFF

Description
The camera takes up to 33 pictures while the shutter button is pressed. Image sizes over 4 are
set to 4 and sensitivities under 800 are raised to 800 or above for the highest possible burst
rate. * Not available in C, B, or SP (X) mode.
The camera takes up to 33 pictures while the shutter button is pressed. Image sizes over 2 are
set to 2 and sensitivities under 800 are raised to 800 or above for a high burst rate. * Not available in C, B, or SP (X) mode.
The camera takes pictures while the shutter button is pressed. Shooting ends when the shutter
button is released or memory is full. To view pictures as they are taken, use the post-shot assist
window (pg. 18). Not available in C, B, or SP (X) mode.
Each time the shutter-release button is pressed, the camera takes three shots: one using the metered value for exposure, the second overexposed by the amount selected for J BRACKETING
in the shooting menu (pg. 86), and the third underexposed by the same amount (the camera may
not be able to use the selected bracketing increment if the amount of over- or under-exposure
exceeds the limits of the exposure metering system). Available in P, S, M, and C modes only.
The camera takes up to three pictures while the shutter button is pressed. Available in all shooting modes except C and SP (X).
Burst mode off. One picture is taken each time the shutter button is pressed.

* Settings that have been altered from the value selected by the user are displayed in yellow; the original setting will be
restored when another burst shooting option is selected.

30

p Burst Mode (Continuous Shooting)

Focus.
2 Press
the shutter button halfway to focus.

Shoot.
3 Pictures
will be taken while the shutter button is pressed.

Shooting ends when the
shutter button is released, memory is full, or the selected number of shots has been
taken.
More on Photography

1 Notes
• In all burst modes except n, focus and exposure are determined by the first frame in each series. The flash
turns off automatically (pg. 28); the previously-selected flash mode is restored when burst shooting is turned
off.
• Frame rate varies with shutter speed.
• If the self-timer is used when n is selected, only one picture will be taken when the shutter button is pressed.
• At a setting of l, white lines may appear in bright areas of the image; these can be avoided by choosing m
mode.
• The number of pictures that can be recorded depends on the memory available. BrackSTORING
eting is only available if there is sufficient memory for three pictures. In all burst modes
except n, additional time may be required to record pictures when shooting ends. The
pictures are displayed in the monitor while recording is in progress.

31

c Instant Zoom (Zoom Framing)
In modes other than B and SP (X), zoom framing offers a quick way to compose pictures.
■ Optical Zoom
Position the subject in the focus frame.
Use the zoom control to frame the subject in
the center of the display.

1

AUTO

N 9
ISO AUTO (800)

The frame is displayed
as shown at right. The
composition can be adjusted using the zoom
control.

AUTO

and shoot.
3 Focus
The framed area

will
be enlarged to create a
full-sized picture.

a frame.
2 Choose
Press the selector down

2 Intelligent Face Detection
Intelligent Face Detection will not detect faces outside
the selected frame.

(c) to cycle through
framing options as
shown below.
1.4 × zoom

2 × zoom

2 × zoom

1.4 × zoom

No zoom

32

3 Caution
Only wide (landscape-orientation) framing is available
when p or n is selected for burst mode. When l
or m is selected, the maximum number of shots that
can be taken in a single burst is 33 for wide framing, 26
for tall framing.

c Instant Zoom (Zoom Framing)

■ Digital Zoom
Enable digital zoom.
Select ON for the D DIGITAL ZOOM option in the setup menu (pg. 104).

1

the picture.
5 Frame
Use the zoom control to choose the area that
will be included in the final photograph.

a subject.
2 Choose
Frame the subject in the center of the display.
AUTO

N 9
ISO AUTO (800)

3 Zoom to the digital zoom position.
Press the selector down (c).
4 The
camera will zoom to the maximum optical zoom position with the area that will be
recorded using digital zoom indicated by a
frame at the center of the display.

will
be enlarged to create a
full-sized picture.

3 Caution
Pictures taken using zoom framing are lower quality
than pictures taken using normal zoom.

More on Photography

and shoot.
6 Focus
The framed area

AUTO

33

d Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects in
P, S, C, or SP (X) modes.
the d button.
1 Press
The exposure indicator will be displayed.
P

N 9
ISO AUTO (800)

Exposure indicator
SET
250

F3.5

a value.
2 Choose
Press the selector left or right. The
effect is visible in the display.

Choose negative values Choose positive values to
to reduce exposure
increase exposure
(“–” sign turns yellow)
(“+” sign turns yellow)

34

to shooting mode.
3 Return
Press the d button to return to shooting
mode.

4 Take pictures.
1 Notes
A d icon and exposure indicator are displayed at settings other than ±0. Exposure compensation is not
reset when the camera is turned off; to restore normal
exposure control, choose a value of ±0. Exposure compensation is disabled if the flash fires when set to AUTO
or i (auto with red-eye reduction); when the flash is
set to l or j, exposure compensation is disabled if
the subject is dark.

d Exposure Compensation
Choosing an Exposure Compensation Value
• Backlit subjects: choose values from +2/3 EV to +12/3 EV (for an explanation of the term “EV”,
see the Glossary on page 122)

• Highly reflective subjects or very bright scenes (e.g., snowfields): +1 EV

More on Photography

• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or dark-colored foliage): –2/3 EV

35

Shooting Mode
Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate
the mode dial to the desired setting (pg. 6). The following modes are available:

A AUTO

C NATURAL & l

Choose for crisp, clear snapshots (pg. 16). This
mode is recommended in most situations.

This mode helps ensure good results with backlit
subjects and in other situations with difficult lighting. Before shooting, raise the flash; pictures can
only be taken when the flash is raised. Each time
the shutter button is pressed, the camera takes
two shots: one shot without the flash to preserve
natural lighting, followed immediately by a second shot with the flash. Do not move the camera
until shooting is complete.

E ANTI-BLUR (Picture Stabilization)
Choose this mode for fast shutter speeds that
reduce blur caused by camera shake or subject
movement.

D NATURAL LIGHT
Capture natural light indoors,
under low light, or where the
flash can not be used. The
flash turns off and sensitivity
is raised to reduce blur.

1 Notes
• Do not use where flash photography is prohibited.
• Only available if memory remains for two pictures.
• Burst mode is not available.
1 Note
See page 85 for flash setting restrictions and page 74 for the sensitivity options available in each mode.

36

Shooting Mode

B ZOOM BRACKETING
2 Intelligent Face Detection
If Intelligent Face Detection is
on, the crops will be centered
on the selected face.

N 9

1 Notes
• Digital zoom can not be used. If digital zoom is active
when zoom bracketing mode is selected, zoom will
be set to the maximum optical zoom position.
• L DUAL IS MODE turns on automatically.
• Burst shooting options are limited to p and OFF.
3 Caution
No pictures will be taken if memory is insufficient to
record three images.

Wide

More on Photography

Each time the shutter button is pressed, the
camera takes three pictures: one at the current
zoom ratio with an image quality of 0, a second zoomed in 1.4 × and cropped to 2, and
a third zoomed in 2 × and cropped to 4. Two
frames are displayed to show the areas that will
be included in the second and third pictures; the
outer frame shows the area that will be recorded
at 1.4 × zoom, the inner frame the area that will be
recorded at 2 × zoom. Press the selector down to
choose from wide and tall crops.

Tall

37

Shooting Mode

SP SCENE POSITION
Your choice of 13 “scenes,” each adapted to particular shooting conditions or a specific type of
subject, can be assigned to the SP position on
the mode dial:

1 Rotate the mode dial to SP.
MENU/OK to display the shoot2 Press
ing menu.
the selector up or down to
3 Press
highlight A SCENE POSITION.
the selector right to display a
4 Press
list of scenes.

38

the selector up or down to
5 Press
highlight a scene (pp. 39–41).
MENU/OK to select the high6 Press
lighted option.
Until the setting is changed as described above,
the chosen scene will be selected whenever the
mode dial is rotated to SP. The default selection
is L.
1 Note: Scene Position
f-CHROME can not be selected for the g
COLOR option in the shooting menu (pg. 76).

Shooting Mode

L PORTRAIT
Choose this mode for softtoned portraits with natural
skin tones.

N SPORT
Choose this mode when
photographing
moving
subjects. E HIGH-SPEED
SHOOTING turns on automatically and priority is given to faster shutter speeds.

P FIREWORKS
Slow shutter speeds are
used to capture the expanding burst of light from a firework. Press the d button
to display a shutter-speed
selection dialog and press the selector up and
down to choose a shutter speed. The flash turns
off automatically.

More on Photography

M LANDSCAPE
Choose this mode for crisp,
clear daylight shots of buildings and landscapes. The
flash turns off automatically.

O NIGHT
Slower shutter speeds are
used to record night and twilight scenes. Use of a tripod
is recommended to prevent
camera shake.

39

Shooting Mode

Q SUNSET
Choose this mode to record
the vivid colors in sunrises
and sunsets.
R SNOW
Choose for crisp, clear shots
that capture the brightness
of scenes dominated by
shining white snow.
S BEACH
Choose for crisp, clear shots
that capture the brightness
of sunlit beaches.

40

T MUSEUM
Choose where flash photography is prohibited or the
sound of the shutter may
be unwelcome. The flash,
speaker, and AF-assist illuminator/self-timer lamp turn off automatically.
1 Note
Photography may be prohibited altogether in some
settings. Obtain permission before shooting.

U PARTY
Capture indoor background
lighting under low-light conditions.

Shooting Mode

V FLOWER
Choose for vivid close-ups of
flowers. The camera focuses
in the macro range and the
flash turns off automatically.

X AUCTION MODE
Choose this mode to combine up to four consecutive shots in a single image 640 × 480 pixels
in size (6). This can be used to record an object
from different angles when posting pictures to a
web auction.

the selector up to display the
1 Press
following layout options:

1

1

2

1

2

1

3

3

2

4

Press the selector left or right to
2 highlight
an option.
MENU/OK to select the high3 Press
lighted option.
a picture. The picture will ap4 Take
pear in the first frame in layout.
MENU/OK to proceed to the
5 Press
next picture. Repeat steps 4 and 5

More on Photography

W TEXT
Take clear pictures of text or
drawings in print. The camera focuses in the macro
range.

To take pictures in auction mode:

until all the frames are filled.
1 Note
Can not be used with face detection.

41

Shooting Mode

P, S, and M Modes
P, S, and M modes provide full access to the shooting and f-mode menus. S and M modes also offer control over shutter speed and aperture.
Mode
P (Program AE;
pg. 43)
S (Shutterpriority AE;
pg. 44)
M (Manual;
pg. 45)

42

Description
The camera sets exposure automatically.
The user chooses the shutter speed,
letting the camera choose the aperture for optimal exposure.
The user chooses both shutter speed
and aperture.

Shutter Speed
Choose fast shutter speeds to freeze motion, slow
shutter speeds to suggest motion by blurring moving objects.

Fast shutter speed

Slow shutter speed

Shooting Mode

P: PROGRAM AE
In this mode, the camera sets exposure automatically.

3 Caution
If the subject is outside the metering range of the camera, the shutter speed and aperture
displays will show “---”. Press the shutter button halfway to measure exposure again.

P

SET SHUTTERSPEED, APERTURE.
F---

More on Photography

----

N 9
ISO AUTO (800)

43

Shooting Mode

S: SHUTTER-PRIORITY AE
In this mode, you choose the shutter speed while
the camera adjusts aperture for optimal exposure.

1 Rotate the mode dial to S.
the d button. Shutter speed
2 Press
and aperture will be displayed.
S

N 9
ISO AUTO (800)

Shutter speed
SET
250

F3.5

the selector up or down to
3 Press
choose the shutter speed. Press
the selector down for faster shutter speeds, up for slower shutter
speeds.

44

pictures. If the correct exposure can not
4 Take
be achieved at the selected shutter speed, aperture will be displayed in red when the shutter button is pressed halfway. Adjust shutter speed until the correct exposure can be
achieved.
3 Caution
If the subject is outside the metering range of the camera, the
shutter speed and aperture displays will show “---”. Press the
shutter button halfway to measure exposure again.

S

N 9
ISO AUTO (800)

SET
50

F---

Shooting Mode

M: MANUAL
In this mode, you choose both shutter speed and
aperture. If desired, exposure can be altered from
the value suggested by the camera.

1

Rotate the mode dial to M.

M

N 9
ISO AUTO (800)

Shutter speed

5 Take pictures.
The Exposure Indicator
The amount the picture will be under- or over-exposed at current settings is shown by the exposure
indicator. Pictures taken with the indicator to the left
of center (“–“) will be underexposed, pictures taken
with the indicator is to the right of center (“+”), overexposed.
M

N 9
ISO AUTO (800)

SET
250

F3.5

Aperture

SET
250

3

Press the selector up or down to
choose the shutter speed.

Underexposed

F3.5

Overexposed

More on Photography

the d button. Shutter speed
2 Press
and aperture will be displayed.

Press the selector left or right to
4 choose
the aperture.

Exposure indicator
3 Caution
Smear may occur at shutter speeds faster than
1/1000 s. Noise in the form of randomly-spaced bright
pixels may occur in long exposures.

45

Shooting Mode

C: CUSTOM
In P, S, and M modes, the K CUSTOM SET option in the shooting menu (pg. 77)
can be used to save the camera settings listed below. These settings are recalled
whenever the mode dial is rotated to C (custom mode).

SHOOTING MENU
SHARPNESS
FLASH
BRACKETING
CUSTOM SET
DUAL IS MODE
SET-UP

STD
0
1

3

OFF

■ Settings Stored with K CUSTOM SET
• f-mode menu: N ISO, O QUALITY, P g COLOR
• Shooting menu: C PHOTOMETRY, D WHITE BALANCE, E HIGH-SPEED SHOOTING,
F FOCUSING, G AF MODE, H SHARPNESS, I FLASH, J BRACKETING, L DUAL IS MODE
• Setup menu: A IMAGE DISP, C AF ILLUMINATOR, D DIGITAL ZOOM, E EVF/LCD MODE
• Other settings: burst mode, Intelligent Face Detection, instant zoom, macro mode, exposure compensation, flash mode, display type (EVF/LCD), and indicators/framing guides/post-shot assist window
(pg. 18)

46

Playback Options
To view the most recent picture in the monitor,
press the a button.
100-0001
N

12/31/2050

Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.

10 : 00 AM

Press the selector right to view pictures
in the order recorded, left to view pictures in reverse order. Keep the selector
pressed to scroll rapidly to the desired frame.

100-0001
N

10 : 00 AM

Indicators
displayed

Indicators
hidden

2050

12/29
12/30
12/31

1/14

Sort by date

More on Playback

12/31/2050

1 Note
Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback.

47

Playback Options

Playback Zoom
Select T to zoom in on pictures displayed in single-frame playback; select W to zoom out. When
the picture is zoomed in, the selector can be used
to view areas of the image not currently visible in
the display.
Zoom indicator
Navigation window
shows portion of image
currently displayed in
monitor

Press DISP/BACK to exit zoom.
1 Note
The maximum zoom ratio varies with image size. Playback zoom is not available with pictures taken at an
image size of 6.

48

Intelligent Face Detection
Pictures taken with Intelligent
Face Detection (pg. 22) are indicated by a g icon. Press the
g button to zoom in on the
ZOOM
BACK
subject selected with Intelligent Face Detection. You can
then use the zoom control to zoom in and out.

Playback Options

Viewing Photo Information
To view or hide the photo
information listed below in
single-frame playback, press
d.
100-0001
N
ISO 400
F3.5
1/250
: STD
: OFF
:
: -1 2 3
12/31/2050 10 : 00 AM

Underexposed: Pixels are clustered
at the left side of the graph.

More on Playback

q Image quality, w Sensitivity, e Shutter speed/aperture, r FinePix color, t Flash mode, y White balance,
u Exposure compensation, i Frame number, o Picture
(overexposed areas blink on and off ), !0 Histogram

Histograms
Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Optimal exposure: Pixels are
distributed in an even curve
throughout the tone range.
Overexposed: Pixels are clustered
at the right side of the graph.

49

Playback Options

Multi-Frame Playback
To change the number of images displayed, select W when a picture is
shown full-frame in the monitor.
100-0001
N

12/31/2050

Select W to
increase the
number of pictures displayed
to two, nine, or
a hundred.

50

Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
2 Tip: Two-Frame Display
Two-frame display can be used
to compare pictures taken in
C mode.

10 : 00 AM

Select T to reduce
the number of
images displayed.

Playback Options

Pictures Taken in a Single Burst
100-0001
In single-frame playback,
pictures taken in burst mode
are indicated as shown at
10 : 00 AM
right. Delete (pg. 53), rotate 12/31/2050
PLAY CONTINUOUS SHOTS
(pg. 92), protect (pg. 93), and
copy (pg. 94) operations apply to all photographs
in the burst. To apply these operations to individual pictures in the burst, press the selector
down.

More on Playback

The first picture in the burst Current frame number/
number of frames in
will be displayed. Press
burst
the selector left or right to
100-0001
view the other pictures in
1/30
the burst; to scroll rapidly
to the desired frame, keep
10 : 00 AM
the selector pressed. Photo 12/31/2050
PLAY NORMAL
information (pg. 49) can be First picture in burst
viewed by pressing the d
displayed
button. Press DISP/BACK to
return to single-frame playback.

1 Notes
• Choose whether to display or hide indicators before
viewing the first picture in the burst. Indicators can
not be displayed or hidden while the individual pictures in the burst are displayed.
• Pressing the selector right when the last picture in
the burst is displayed displays the first picture; pressing the selector left when the first picture is displayed
displays the last picture.
• If the pictures in the burst are contained in more than
one folder, the pictures in each folder will be treated
as a separate bursts.
• When pictures taken in burst mode are displayed in
single-frame playback as shown at right, photo information can not be displayed.

51

Playback Options

Sort by Date
Choose sort-by-date mode to view pictures taken on a selected date.
DISP/BACK until the
1 Press
date screen is displayed.

sort-by-

2050

12/29
12/30
12/31

1/14

the selector to highlight the ar2 Use
row (x) at the top left corner of the
display.
the selector left to highlight
3 Press
the date.
2050

12/29
12/30
12/31

14

52

the selector up or down to se4 Press
lect a date.
the selector right to return to
5 Press
the sort-by-date display.
the selector to highlight im6 Use
ages and press MENU/OK to view the
highlighted image full frame.

A Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on deleting
pictures in single-frame playback, see page 21). Note that deleted pictures can not be recovered. Copy
important pictures to a computer or other storage device before proceeding.
MENU/OK to display the play1 Press
back menu.

the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.

PLAYBACK MENU
ERASE
RED EYE REMOVAL
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO

the selector right to display de3 Press
lete options.
PLAYBACK MENU
ERASE
BACK
RED EYE REMOVAL
FRAME
IMAGE ROTATE
ALL FRAMES
PROTECT
COPY
VOICE MEMO

page).
2 Tips: Deleting Pictures
• When a memory card is inserted, pictures will be deleted from the memory card; otherwise, pictures will
be deleted from internal memory.
• Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (pg. 93).
• If a message appears stating that the selected images
are part of a DPOF print order, press MENU/OK to delete
the pictures.

More on Playback

the selector up or down to
2 Press
highlight ERASE.

MENU/OK to display options for
5 Press
the selected item (see following

53

A Deleting Pictures

■ FRAME
FRAME:: Deleting Selected Images
ERASE OK?
Selecting FRAME displays
the dialog shown at right.
YES

■ ALL FRAMES
FRAMES:: Deleting All Images
ALL OK?
Selecting ALL FRAMES IT MAYERASE
TAKE A WHILE
displays the confirmation
shown at right.
OK
CANCEL

Press the selector left or right to scroll
through pictures and press MENU/OK to
delete the current picture (the picture
is deleted immediately; be careful not
delete the wrong picture).
Press DISP/BACK to exit when all the desired pictures have been deleted.

54

CANCEL

SET

Press MENU/OK to delete all
unprotected pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel before all pictures have been
CANCEL
deleted (any pictures deleted before the button was pressed can not be
recovered).

F Recording Movies
Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not
cover the microphone during recording.
the mode dial to F (movie
1 Rotate
mode).
12s
STANDBY

turn picture stabiliza3 To
tion on for reduced blur,

DUAL IS MODE
MOVIE WITH ZOOM
SET-UP

OFF
ON
DIGITAL
OFF

press MENU/OK to display
the shooting menu and
select ON for L DUAL
IS MODE (note that this will reduce the picture
angle). Press MENU/OK to exit to movie mode.

Time available
is displayed in
monitor

Press the f button and
2 select
a frame size from

SHOOTING MENU

MODE MENU
QUALITY

49s
2m00s

Movies

8m30s
the O QUALITY menu
(pg. 75). Choose 9
(1280 × 720 pixels) for
an aspect ratio of 16 : 9 (High Definition), 7
(640 × 480 pixels) for an aspect ratio of 4 : 3, or
8 (320 × 240 pixels) for longer movies. Press
MENU/OK to exit to movie mode.

55

F Recording Movies

MENU/OK to display
4 Press
the shooting menu and

SHOOTING MENU
DUAL IS MODE
MOVIE WITH ZOOM
SET-UP

OFF
OPTICAL

select the type of zoom
available in movie mode
from the Q MOVIE
WITH ZOOM menu. Choose OPTICAL to
enable optical zoom and allow the camera
to continue to focus during recording (note
that the sound of the lens may be recorded).
Choose DIGITAL to enable digital zoom and
turn focusing off during recording (note that
digital zoom may produce lower quality images than optical zoom). Press MENU/OK exit to
movie mode.
1 Note
Image quality, picture stabilization, and movie zoom
options are stored when the camera is turned off or
another mode is selected, and are restored when
the mode dial is rotated to F.

56

Press the shutter button all the way
5 down
to start recording.
REC

12s

z REC and time
remaining are displayed in monitor

1 Note
Exposure and white balance are adjusted automatically
throughout recording. The color and brightness of the
image may vary from that displayed before recording
begins.
2 Tip
There is no need to keep the shutter button pressed
during recording.

F Recording Movies

the shutter button halfway to
6 Press
end recording. Recording ends automatically when the movie reaches
maximum length or memory is full.

3 Caution
The indicator lamp lights while movies are being recorded. Do not remove the memory card during
shooting or while the indicator lamp is lit. Failure to
observe this precaution could prevent the movie from
being played back.

Movies

1 Notes
• Movies are recorded as monaural MPEG-4 files with a
maximum file size of 4 GB and a minimum length of
1 s. Movies recorded at a size of 9 have a maximum length of 15 minutes. See page 124 for more
information on recording times.
• Other cameras may not be able to display movies recorded with this camera.
• The E EVF/LCD MODE option in the setup menu is
fixed at 30 fps in movie mode.

57

a Viewing Movies
During playback (pg. 47),
movies are displayed in the
monitor as shown at right.
The following operations
can be performed while a
movie is displayed:
Operation
Start/pause
playback
End
playback/
delete

100-006

15s
12/31/2050
PLAY

10 : 00 AM

Description
Press the selector down to start playback.
Press again to pause.
Press the selector up to end playback. If
playback is not in progress, pressing the
selector up will delete the current movie.
Press the selector right to advance, left to
Advance/ rewind. If playback is paused, the movie
rewind will advance or rewind one frame each
time the selector is pressed.
Press MENU/OK to pause playback and disAdjust play volume controls. Press the selector
volume up or down to adjust the volume; press
MENU/OK again to resume playback.

58

Progress is shown in the monitor during playback.

Progress bar
STOP

PAUSE

2 Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
3 Cautions
• Do not cover the speaker during playback.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.

Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
The supplied A/V cable and the HD cable in the optional FUJIFILM HD-S2 HDTV connection kit connect
as shown below. Turn the camera off before connecting either cable.
■ A/V cable
Connect yellow plug
to video-in jack

Insert into A/V cable
connector

Connect white plug
to audio-in jack

Standard TV

■ High Definition (HD) cable (sold separately)
Insert red, blue, and green video connectors
into matching Pr, Pb, and Y jacks

Insert red and white audio connectors
into matching R and L audio jacks

High Definition
(HD) TV

The HDTV Kit for FUJIFILM Digital Cameras (Sold Separately)
The HDTV kit for FUJIFILM digital cameras contains an HD cable for connecting the camera to High Definition
(HD) video devices and a remote control. The remote control can be used to control the camera during playback or as a remote shutter release.

Connections

Insert into HD cable
connector

59

Viewing Pictures on TV

Press a for about a second to turn the camera on. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
2 Tip
When the HD cable in the optional FUJIFILM HD-S2 HDTV connection kit is connected, pressing the f button in
playback mode displays a J DISP ASPECT option that allows you to choose how pictures with an aspect ratio
of 4 : 3 are displayed (pg. 88). At default settings, black bands appear to either side pictures taken at 0, 2,
4, 5, or 6. Regardless of the setting chosen, pictures taken at an image quality of 13:2 appear in a black
frame.
1 Notes
• Use an optional AC-5VX AC adapter and CP-04 DC coupler to power the camera for extended periods (pg. 109).
• Image quality drops during movie playback. Black bands will be displayed on either side of movies recorded at
7 and 8 when they are displayed on HD video devices.
3 Caution
When connecting the cable, be sure the connectors are fully inserted.

60

Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.

Connecting the Camera

Printing Selected Pictures

the supplied USB cable as shown and 1 Press the selector left or right to dis1 Connect
play a picture you wish to print.
turn the printer on.
the selector up or down to
2 Press
choose the number of copies (up to
99).

the a button for about a second to turn
2 Press
the camera on. t USB will be displayed in

USB

confirmation dialog when settings
are complete.
PRINT THESE FRAMES
TOTAL: 9 SHEETS

PICTBRIDGE
TOTAL: 00000

YES

00 SHEETS
FRAME
OK

SET

CANCEL

4 Press MENU/OK to start printing.

Connections

the monitor, followed by the PictBridge display shown below at right.

steps 1–2 to select additional
3 Repeat
pictures. Press MENU/OK to display a

61

Printing Pictures via USB
2 Tip: Printing the Date of Recording
To print the date of recording on pictures, press DISP/
BACK in steps 1–2 to display the PictBridge menu (see
“Printing the DPOF Print Order,” below). Press the selector up or down to highlight PRINT WITH DATE s
and press MENU/OK to return to the PictBridge display
(to print pictures without the date of recording, select
PRINT WITHOUT DATE). To ensure that the date is
correct, set the camera clock before taking pictures.
1 Note
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.

Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (pg. 87):
display, press DISP/
1 InBACKthetoPictBridge
open the PictBridge menu.
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF

the selector up or down to
2 Press
highlight u PRINT DPOF.
MENU/OK to display a confirma3 Press
tion dialog.
PRINT DPOF OK?
TOTAL: 9 SHEETS

YES

62

CANCEL

Printing Pictures via USB

4 Press MENU/OK to start printing.
During Printing
The message shown at right
is displayed during printing.
Press DISP/BACK to cancel before all pictures are printed
(depending on the printer,
printing may end before the
current picture has printed).

PRINTING

CANCEL

1 Notes
• Use an optional AC-5VX AC adapter and CP-04 DC
coupler to power the camera for extended periods.
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• If the printer does not support date printing, the
PRINT WITH DATE s option will not be available in
the PictBridge menu and the date will not be printed
on the pictures in the DPOF print order.
• Default printer page size and print quality settings are
used when printing via direct USB connection.

If printing is interrupted, press a to turn the camera
off and then on again.

Connections

Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the monitor and turn the camera off. Disconnect the USB
cable.

63

Printing Pictures via USB

Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the
playback f-MODE menu can be used to create
a digital “print order” for PictBridge-compatible
printers (pg. 61) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is standard that allows pictures to be printed from
“print orders” stored in internal memory or
on a memory card. The information in the order includes the pictures to be printed and the number of
copies of each picture.

■ WITH DATE s// WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback f-MODE menu
and press the selector up or down to highlight
WITH DATE s or WITHOUT DATE.
MODE MENU
SLIDE SHOW
PRINT ORDER (DPOF)
WITH DATE
WITHOUT DATE
RESET ALL

64

WITH DATE s: Print date of recording on pictures.
WITHOUT DATE: Print pictures
without date.

Press MENU/OK and follow the steps below.
the selector left or right to dis1 Press
play a picture you wish to include in
or remove from the print order.
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001

Total number of prints
Number of copies

01 SHEETS
FRAME

SET

steps 1–2 to complete the
3 Repeat
print order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit without changing the print order.

Printing Pictures via USB

total number of prints is dis4 The
played in the monitor. Press MENU/
OK to exit.
The pictures in the current
print order are indicated by a
u icon during playback.

100-0001
N

12/31/2050

10 : 00 AM

■ RESET ALL
RESET DPOF OK?
To cancel the current print
order, select RESET ALL
in the K PRINT ORDER
(DPOF) menu. The confirYES
CANCEL
mation shown at right will
be displayed; press MENU/OK to remove all pictures
from the order.

Connections

1 Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
RESET DPOF OK?
• If a memory card is inserted
containing a print order created by another camera, the
message shown at right will
YES
NO
be displayed. Pressing MENU/
OK cancels the print order; a
new print order must be created as described above.

65

Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
Do NOT connect the camera to the computer until installation is complete.

Installing FinePixViewer
FinePixViewer is available in Windows and Macintosh versions. Installation instructions for Windows
are on pages 66–67, those for the Macintosh on pages 68–69.
Installing FinePixViewer: Windows
Confirm that the computer meets the following system requirements:

1

Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional
(Service Pack 2), or Windows 2000 Professional (Service Pack 4)
• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
CPU • Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
• Windows 2000: 200 MHz Pentium or better
• Windows Vista: 512 MB or more (1 GB or more recommended)
RAM • Windows XP: 512 MB or more
• Windows 2000: 128 MB or more
Free disk A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
space more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet conOther
nection and e-mail software required to use e-mail option
• QuickTime 7.0 or later required to view MPEG-4 movies
OS

3 Caution
Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or
computers that have been upgraded from earlier versions of Windows.

66

Viewing Pictures on a Computer

2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Allow.

The installer will start automatically; click Installing FinePixViewer and follow the on-screen instructions to install FinePixViewer. Note that the Windows CD may be required during installation.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu (Windows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then double-click
the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.

prompted to install Windows Media Player, QuickTime, or DirectX, follow the on-screen instruc4 Iftions
to complete installation.

the software. The version number is printed at the top of the CD label for reference when updating
the software or contacting customer support.

Connections

prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the
5 When
computer. Store the installer CD in a dry location out of direct sunlight in case you need to re-install

Installation is now complete. Proceed to “Connecting the Camera” on page 70.

67

Viewing Pictures on a Computer

Installing FinePixViewer: Macintosh
Confirm that the computer meets the following system requirements:

1

CPU

PowerPC or Intel
Pre-installed versions of Mac OS X version 10.3.9–10.4.11 (as of February 1, 2008; visit http://www.fujifilm.com
OS
for more information)
RAM
256 MB or more
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
Other
connection and e-mail software required to use e-mail option
• QuickTime 7.0 or later required to view MPEG-4 movies

After starting the computer and quitting any applications that may be running, insert the installer
2 CD
in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click Installer
for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an
3 An
administrator name and password when prompted and click OK, then follow the on-screen instructions to install FinePixViewer. If prompted to install QuickTime, follow the on-screen instructions.
Click Exit to quit the installer when installation is complete.

68

Viewing Pictures on a Computer

the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 Remove
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number is
printed at the top of the CD label for reference when updating the software or contacting customer
support.
Applications in the Finder Go menu to open the applications folder.
5 Select
Double-click the Image Capture icon and select Preferences… from the Image Capture application menu.
The Image Capture preferences dialog will be displayed. Choose Other… in
the When a camera is connected, open menu, then select FPVBridge in
the “Applications/FinePixViewer” folder and click Open.

Installation is now complete. Proceed to “Connecting the Camera” on page 70.

Connections

Select Quit Image Capture from the Image Capture application menu.

69

Viewing Pictures on a Computer

Connecting the Camera
the pictures you wish to copy are stored on a 3 Press the a button for about a second to turn
1 Ifmemory
card, insert the card into the camera
the camera on. FinePixViewer will start auto(pg. 11). If no card is inserted, pictures will be
copied from internal memory.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera or use an optional AC-5VX AC adapter and
CP-04 DC coupler.

the camera off and connect the supplied
2 Turn
USB cable as shown, making sure the connectors are fully inserted. Connect the camera directly to the computer; do not use a USB hub
or keyboard.

matically and the “Save Image Wizard” will be
displayed. Follow the on-screen instructions
to copy pictures to the computer. To exit without copying pictures, click CANCEL.
3 Caution
If FinePixViewer does not start automatically, the
software may not be correctly installed. Disconnect the camera and reinstall the software.

For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.

1 Note
The camera will not turn off automatically while connected to a computer.

70

Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out, follow
the on-screen instructions to turn the camera off and
disconnect the USB cable.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the
software or when it is no longer required. After quitting
FinePixViewer and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the
Trash and select Empty Trash in the Finder menu
(Macintosh), or open the control panel and use “Programs and Features” (Windows Vista) or “Add/Remove
Programs” (other versions of Windows) to uninstall
FinePixViewer, FinePix Resource, and FinePix Studio.
Under Windows, one or more confirmation dialogs
may be displayed; read the contents carefully before
clicking OK.

Connections

3 Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with the
camera. If a memory card containing a large number of images is inserted, there may be a delay before
FinePixViewer starts and FinePixViewer may be unable to import or save images. Use a memory card
reader to transfer pictures.
• Make sure the indicator lamp is out before turning the
camera off or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or
damage to internal memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• Use FinePixViewer to copy voice memos.
• FinePixViewer can not be used to edit MPEG-4 movies.
• In some cases, it may not be possible to access pictures saved to a network server using FinePixViewer
in the same way as on a standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.

71

Using the Menus: Shooting Mode
The f-mode and shooting menus contain settings for a wide range of shooting conditions.

Using the f-Mode Menu
the f button to display the
1 Press
f-MODE menu.
MODE MENU

the selector right to display
3 Press
options for the highlighted item.
MODE MENU

AUTO (400)
N

ISO
QUALITY
COLOR

ISO
QUALITY

F
N
3:2
COLOR
16:9
16:9

the selector up or down to
2 Press
highlight the desired menu item.

11
AUTO (400)
22 FRAMES
25
30
44
69
80

the selector up or down to
4 Press
highlight the desired option.
MENU/OK to select the high5 Press
lighted option.

Menus

72

Using the Menus: Shooting Mode

f-Mode Menu Options
Menu item

Description
Options
Default
Adjust ISO sensitivity (pg. 74). Choose AUTO / AUTO (1600) / AUTO (800) /
N ISO
higher values when the subject is poorly AUTO (400) / 6400 / 3200 / 1600 /
AUTO
lit.
800 / 400 / 200 / 100
0F/0N/13:2/316:9/2/
O QUALITY
Choose image size and quality (pg. 75).
0N
4/516:9/5/6
Shoot pictures in standard or saturated
f-STANP g COLOR
f-STANDARD/d/e
color or in black-and-white (pg. 76).
DARD

Menus

73

Using the Menus: Shooting Mode

N ISO
Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is
poor; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at settings of 3200 and 6400. If AUTO, AUTO (1600), AUTO (800), or AUTO (400) is selected, the camera
will adjust sensitivity automatically in response to shooting conditions. The maximum value that will
be selected by the camera at settings of AUTO (1600), AUTO (800), or AUTO (400) is 1600, 800, or
400 respectively.
Settings of 100 – 6400 are available only in P and M modes, AUTO (400), AUTO (800), and AUTO
(1600) only in P and S modes; at high shutter speeds, the only options available in S mode will be
AUTO (3200) and AUTO (6400). AUTO is available in all modes except P, S, C, and M. At settings of
3200 and 6400, image quality (pg. 75) will automatically be lowered to 2 or below; settings that
have been altered from the value selected by the user are displayed in yellow. The previous image
quality will be restored when another sensitivity is selected.
Settings other than AUTO are shown by an icon in the display.
1 Note
Sensitivity is not reset when the camera is turned off or another shooting mode is selected.

74

M

N 9
ISO AUTO (800)

Using the Menus: Shooting Mode

O QUALITY
Choose the size and quality at which still pictures
are recorded. Large pictures can be printed at
large sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Option
0F (3,648 × 2,736)
0N (3,648 × 2,736)

* Aspect ratio is 16 : 9, suited to high-quality display on High
Definition (HD) devices.

The number of pictures that can be taken at current settings (pg. 124) is shown to the right of the
image quality icon in the display.

AUTO

N 9
ISO AUTO (800)

4:3

AUTO

3:2

1 Notes
• Image quality is not reset when the camera is turned
off or another shooting mode is selected.
• At settings of 0, 13:2, and 316:9, sensitivity
(pg. 74) is automatically lowered to 1600 or below;
settings that have been altered from the value selected by the user are shown in yellow. The previous
sensitivity will be restored when another image quality option is selected.
• Image quality is fixed at 6 in SP (X) mode (pg.
41).

Menus

Prints at sizes up to
31 × 23 cm (12 × 9 in.). Choose
0F for high-quality prints.
31 × 21 cm (12 × 8 in.). Aspect ra13:2 (3,648 × 2,432)
tio is 3 : 2.
31 × 24 cm (12 × 7 in.). Choose for
316:9 (3,648 × 2,056)
high-quality prints. *
2 (2,592 × 1,944)
22 × 16 cm (8.5 × 6.5 in.)
4 (2,048 × 1,536)
17 × 13 cm (7 × 5 in.)
516:9 (1,920 × 1,080) 16 × 9 cm (6.5 × 3.5 in.) *
5 (1,600 × 1,200)
14 × 10 cm (5.3 × 4 in.)
5 × 4 cm (2 × 1.5 in.). Suited to e6 (640 × 480)
mail or the web.

Aspect Ratio
Pictures taken at an image quality setting of 13:2
have an aspect ratio of 3 : 2, the same as a frame of
35-mm film. Pictures taken at 316:9 and 516:9
have an aspect ratio of 16 : 9, suited to display on High
Definition (HD) devices. Pictures taken at other settings have an aspect ratio of 4 : 3.

75

Using the Menus: Shooting Mode

P g COLOR
Enhance contrast and color saturation or take pictures in black and white.
Option
Description
f-STANDARD Standard contrast and saturation. Recommended in most situations.
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens and blues in
d f-CHROME
landscapes. Not available in SP mode.
e f-B&W
Take pictures in black and white.

Settings other than f-STANDARD are shown by an icon in the display.
1 Notes
• g COLOR is not reset when the camera is turned off or another shooting mode is selected.
• The effects of d f-CHROME vary from scene to scene and may be difficult to discern with some subjects.
Depending on the subject, the effects of d f-CHROME may not be visible in the display.

76

Using the Menus: Shooting Mode

Using the Shooting Menu
MENU/OK to display the shoot1 Press
ing menu.
SHOOTING MENU
SELF-TIMER
PHOTOMETRY
WHITE BALANCE
HIGH-SPEED SHOOTING
FOCUSING
AF MODE

the selector right to display
3 Press
options for the highlighted item.
SHOOTING MENU

OFF
AUTO
OFF

1 Note
The options displayed in the shooting menu vary
depending on the shooting mode.

the selector up or down to
2 Press
highlight the desired menu item.

SELF-TIMER
OFF
PHOTOMETRY
MULTI
WHITE BALANCE
AUTO
SPOT
OFF
HIGH-SPEED SHOOTING
AVERAGE
FOCUSING
AF MODE

the selector up or down to
4 Press
highlight the desired option.
MENU/OK to select the high5 Press
lighted option.

Menus

77

Using the Menus: Shooting Mode

Shooting Menu Options
Menu item

Description

A SCENE POSITION

Choose a scene for SP mode (pg. 38).

B SELF-TIMER

Take pictures with the self-timer (pg. 79).
Choose how the camera meters exposure (pg.
80).

C PHOTOMETRY
D WHITE BALANCE

Adjust color for different light sources (pg. 81).

Options
L/M/N/O/P/Q/
R/S/T/U/V/W/X
10 SEC / 2 SEC / OFF

Default

o/p/q

o

AUTO/h/i/j/k/
l/m/n
ON / OFF
u/v/w

L
OFF

AUTO

E HIGH-SPEED SHOOTING Choose for quick shutter response (pg. 83).
OFF
F FOCUSING
Choose a focus mode (pg. 83).
v
Choose how the camera selects a focus area (pg.
G AF MODE
r/s/t
r
84).
Choose whether to sharpen or soften outlines HARD / STANDARD /
STANDARD
H SHARPNESS
SOFT
(pg. 85).
2
2
– /3 EV – + /3 EV in steps
0
I FLASH
Adjust flash brightness (pg. 85).
of 1/3 EV
Choose the size of the bracketing increment 1
±1/3 EV
J BRACKETING
± /3 EV / ±2/3 EV / ±1 EV
when o is selected in burst mode (pg. 86).
K CUSTOM SET
Save settings for P, S, and M modes (pg. 46).
—
—
L DUAL IS MODE
Reduce blur (pg. 86).
ON / OFF
OFF
Perform basic camera setup such as choosing
M SET-UP
a language and setting the time and date (pg.
W/X/Y/Z
—
100).

78

Using the Menus: Shooting Mode

B SELF-TIMER
Choose the duration for the self-timer. The selftimer is available in all shooting modes.
• 10 SEC: Choose for self-portraits or for group portraits that include the photographer.
• 2 SEC: Choose to avoid blur caused by the camera moving when the shutter button is pressed.
• OFF: Self-timer off.
To use the self-timer, choose 10 SEC or 2 SEC from
the self-timer menu and follow the steps below.

the timer.
2 Start
Press the shutter button the rest
of the way down to start the timer.
The display shows the number of
seconds remaining until the shutter is released. To stop the timer before the
picture is taken, press DISP/BACK.
9

Focus.
1 Press
the shutter button halfway
to focus.
3 Caution
Stand behind the camera when using the shutter
button. Standing in front of the lens can interfere
with focus and exposure.

Menus

The self-timer lamp on
the front of the camera
will blink immediately
before the picture is
taken. If the two-second timer is selected,
the self-timer lamp
will blink as the timer
counts down.

79

Using the Menus: Shooting Mode
Intelligent Face Detection
Because it ensures that the faces of portrait subjects
will be in focus, Intelligent Face Detection (pg. 22) is
recommended when using the self-timer for group
portraits or self-portraits. To use the self-timer with
Intelligent Face Detection, select 10 SEC or 2 SEC in
the self-timer menu and then press the shutter button all the way down to start the timer. The camera
will detect faces while the timer is counting down
and adjust focus and exposure immediately before
the shutter is released. Be careful not to move until
the picture has been recorded.
1 Note
The self-timer turns off automatically when the picture
is taken, a different shooting mode is selected, playback mode is selected, or the camera is turned off.

80

C PHOTOMETRY
Choose how the camera meters exposure in P, S,
M, and C modes (not available when Intelligent
Face Detection is on).
• o MULTI: Automatic scene recognition is used
to adjust exposure for a wide range of shooting
conditions.
• p SPOT: The camera meters lighting conditions
at the center of the frame. Recommended when
the background is much brighter or darker than
the main subject. Can be used with focus lock
(pg. 24) to meter off-center subjects.
• q AVERAGE: Exposure is set to the average for
the entire frame. Provides consistent exposure
across multiple shots with the same lighting,
and is particularly effective for landscapes and
portraits of subjects dressed in black or white.

Using the Menus: Shooting Mode

D WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white balance,” see the Glossary on page 122). This option
is available in P, S, M, C, and SP (X) modes.
Option
AUTO
h
i
j
k
l
m
n

Description
White balance adjusted automatically.
Measure a value for white balance (pg. 82).
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.

If AUTO does not produce the desired results
(for example, when taking close-ups), select h
and measure a value for white balance (pg. 82) or
choose the option that matches the light source.
1 Notes
• At settings other than h, auto white balance is used
with the flash. Lower the flash (pg. 28) to take pictures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.

Menus

81

Using the Menus: Shooting Mode

■ h: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. The options
at right will be displayed; frame a white object so that it fills the monitor and press
the shutter button all the way down to measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured
value. This value is stored even when the battery is removed and can be reselected by pressing MENU/OK when custom white balance options are displayed.

CUSTOM WB

SHUTTER NEW WB
NOT CHANGE

CANCEL

If “UNDER” is displayed, raise exposure compensation (pg. 34) and try again.
If “OVER” is displayed, lower exposure compensation and try again.
2 Tip
To give a deliberate color cast to your photographs, measure a value for custom white balance using a colored
instead of a white object.

82

Using the Menus: Shooting Mode

E HIGH-SPEED SHOOTING
Selecting ON reduces focusing time, ensuring a
quick shutter response. This option is available in
all modes except SP (X), and turns on automatically in SP (N) mode.
1 Notes
• Choosing ON increases the drain on the battery.
Choose OFF to save battery power.
• The E EVF/LCD MODE option in the setup menu is
automatically set to 60 fps when high-speed shooting is on (pg. 101).

Menus

F FOCUSING
Choose how the camera focuses in P, S, M, and
C modes.
• u CONTINUOUS AF: The camera continually adjusts focus to reflect changes in the distance to
the subject while the shutter button is pressed
halfway (note that this increases the drain on
the battery). Intelligent Face Detection turns
off automatically and G AF MODE is fixed at
r CENTER. Choose for moving subjects.
• v SINGLE AF: Focus locks while the shutter button is pressed halfway. Choose for stationary
subjects.
• w MF: Focus manually by
+
pressing the d button
and using the zoom control. The focus brackets P
N 9
ISO AUTO (800)
in the display turn yellow
when the subject is in focus. Press the shutter butFOCUSING
250
F3.5
ton all the way down to
take pictures. Intelligent Face Detection turns
off automatically.

83

Using the Menus: Shooting Mode

G AF MODE
In P, S, M, and C modes (pp. 42–46), this option
controls how the camera selects the focus area
when Intelligent Face Detection is off (pg. 22). Regardless of the option selected, the camera will
focus on the subject in the center of the monitor
when macro mode is on (pg. 27).
N 9
• r CENTER: The camera fo- P
ISO AUTO (800)
cuses on the subject in the
center of the frame. This
APERTURE.
option can be used with 250SET SHUTTERSPEED,
F3.5
focus lock.
• s MULTI: When the shutter button is pressed
halfway, the camera detects high-contrast subjects near the center of the frame and selects
the focus area automatically (if the focus frame is
not displayed, select r CENTER and use focus
lock; pg. 24).
P

250

N 9
ISO AUTO (800)

Press
halfway

SET SHUTTERSPEED, APERTURE.
F3.5

Focus frame

84

SELECT AF AREA
• t AREA: The focus position can be chosen manually by pressing the selector
up, down, left, or right and
SET
CANCEL
pressing MENU/OK when
the focus brackets are in the desired position.
Choose for precise focus when the camera is
mounted on a tripod. Note that exposure is set
for the subject in the center of the frame; to meter an off-center subject, use AF/AE lock (pg. 24).

1 Note
G AF MODE is not available when MF is selected for
F FOCUSING.

Using the Menus: Shooting Mode

H SHARPNESS
Choose whether to sharpen SHOOTING MENU
SHARPNESS
STD
HARD
or soften outlines in P, S, M,
0
FLASH
STANDARD
BRACKETING
SOFT
CUSTOM SET
and C modes.
OFF
DUAL IS MODE
SET-UP
• HARD: Use for sharp outlines
when photographing such
subjects as buildings and
text.
• STANDARD: Standard sharpness. Best choice in
most situations.
• SOFT: Use for soft outlines in portraits and similar
subjects.
1

3

I FLASH
Adjust flash brightness in P, SHOOTING MENU
SHARPNESS
STD
S, M, and C modes. Choose
0
FLASH
BRACKETING
0
2
CUSTOM SET
from values between + /3 EV
OFF
DUAL IS MODE
SET-UP
and –2/3 EV. The default setting is ±0. Note that the
desired results may not be achieved depending
on shooting conditions and the distance to the
subject.
2
1
1
2

3

3 1

3

3
3

Menus

85

Using the Menus: Shooting Mode

J BRACKETING
Choose the size of the expo- SHOOTING MENU
SHARPNESS
STD
sure bracketing increment
0
FLASH
BRACKETING
EV
CUSTOM SET
used when o (bracketing)
EV
OFF
DUAL IS MODE
1 EV
SET-UP
is selected in burst mode
(P, S, M, and C modes only).
Choose from increments of ±1/3 EV, ±2/3 EV, and
±1 EV (for an explanation of the term “EV,” see the
Glossary on page 122).
1
2

1

3

3

3

L DUAL IS MODE
Select ON to reduce blurring caused by camera
shake in all shooting modes. In A and E
modes, this option also reduces blur caused by
subject movement (dual IS mode). Note that blurring may still occur in some situations.
A f icon appears in the display when ON is selected.

P

12/31/2050 10 : 00 AM
F3.5
250

86

N 9
ISO AUTO (800)

Using the Menus: Playback Mode
The f-MODE and playback menus are used to manage the pictures in internal memory or on the
memory card.

Using the f-Mode Menu
the a button to enter play1 Press
back mode (pg. 47).
the f button to display the
2 Press
f-MODE menu.

the selector up or down to
5 Press
highlight the desired option.
MENU/OK to select the high6 Press
lighted option.

MODE MENU
SLIDE SHOW
PRINT ORDER (DPOF)

f-Mode Menu Options
Option

the selector up or down to
3 Press
highlight the desired menu item.

MODE MENU
SLIDE SHOW
PRINT ORDER (DPOF)
WITH DATE
WITHOUT DATE
RESET ALL

Menus

the selector right to display
4 Press
options for the highlighted item.

Description
View pictures in a slide show (pg.
I SLIDE SHOW
88).
Choose a display mode for viewing
photographs on an HD TV (pg. 88;
J DISP ASPECT
available only when an HD cable is
connected).
Select pictures for printing on DPOFK PRINT ORDER
and PictBridge-compatible devices
(DPOF)
(pg. 64).

87

Using the Menus: Playback Mode

I SLIDE SHOW
View pictures in an automated slide show. Choose
the type of show and press MENU/OK to start. Press
DISP/BACK at any time during the show to view onscreen help. When a movie is displayed, movie
playback will begin automatically, and the slide
show will continue when the movie ends. The
show can be ended at any time by pressing MENU/
OK.
Option
NORMAL
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
SCRAP
BOOK VIEW

Displayed in
Press selector left or right to go back or
skip ahead one frame. Select FADE-IN
for fade transitions between frames.
As above, except that camera automatically zooms in on faces selected with
Intelligent Face detection.
Display several pictures at once.
As for MULTIPLE, except that the pictures are chosen randomly.

1 Note
The camera will not turn off automatically while a slide
show is in progress.

88

J DISP ASPECT
Choose the aspect ratio used when photographs
with at a 4 : 3 aspect ratio (pg. 75) are viewed on a
High Definition device (pg. 59). This option is only
available when the HD cable in the optional FUJIFILM HD-S2 HDTV connection kit is connected.
• 16 : 9: The image fills the screen, with the top and
bottom cropped out.
• 4 : 3: The entire image is displayed, with black
bands at the right and left sides.
Photographs with an aspect ratio of 16 : 9 are displayed full screen, those with an aspect ratio of
3 : 2 in a black frame.

Using the Menus: Playback Mode

Using the Playback Menu
a to enter playback mode
1 Press
(pg. 47).
MENU/OK to display the play2 Press
back menu.
PLAYBACK MENU
ERASE
RED EYE REMOVAL
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO

the selector up or down to
3 Press
highlight the desired menu item.

the selector right to display
4 Press
options for the highlighted item.
PLAYBACK MENU
ERASE
BACK
RED EYE REMOVAL
FRAME
IMAGE ROTATE
ALL FRAMES
PROTECT
COPY
VOICE MEMO

the selector up or down to
5 Press
highlight the desired option.
MENU/OK to select the high6 Press
lighted option.

Menus

89

Using the Menus: Playback Mode

Playback Menu Options
The following options are available:
Option

Description
Delete all or selected pictures
A ERASE
(pg. 53).
Create copies with reduced red
B RED-EYE REMOVAL
eye (pg. 90).
Create an edited copy of a movie
L MOVIE TRIMMING
(pg. 91).
C IMAGE ROTATE
Rotate pictures (pg. 92).
Protect pictures from accidental
D PROTECT
deletion (pg. 93).
Copy pictures between internal
E COPY
memory and a memory card (pg.
94).
Add voice memos to pictures (pg.
F VOICE MEMO
96).
Create cropped copies of pictures
G TRIMMING
(pg. 98).
View images of a selected type
H PLAYBACK TYPE
(pg. 99).
Perform basic camera setup (pg.
M SET-UP
100).

90

B RED EYE REMOVAL
If the current picture is marked with a g icon to
indicate that it was taken with Intelligent Face Detection, this option can be used to remove redeye. The camera will analyze the image; if red-eye
is detected, the image will be processed to create
a copy with reduced red-eye.
REMOVAL OK?

YES

REMOVING

CANCEL

1 Notes
• Red eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red eye can not be
removed from pictures that have already been processed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
• Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.

Using the Menus: Playback Mode

L MOVIE TRIMMING
To create a shorter copy of the movie currently
displayed in playback mode, select L MOVIE
TRIMMING from the playback menu.
the selector down to start or
1 Pressing
pause playback, play the movie until
the first frame you wish to include in
the new movie is displayed.

2 Press MENU/OK.
MOVIE TRIMMING

PAUSE
SELECT CUT
OUT POINT
BACK

Pressing the selector down to re3 sume
or pause playback, play the
movie until the last frame you wish
to include in the new movie is displayed.
MOVIE TRIMMING

3m30s

Indicator shows
the position of
the final frame.

PLAY
SELECT CUT
SAVE SELECTION
BACK
1m00s

Indicator shows
the position
of the starting
frame.

To return to step 1 and choose a new starting
point, press DISP/BACK.
the selector up to choose
4 Press
whether to save the portion of the

MENU/OK to save the edited
5 Press
movie to a new file and return to

Menus

movie between the starting and final frames or to save only the portions before
the starting frame and after the final frame.

playback with the new movie displayed.
91

Using the Menus: Playback Mode

C IMAGE ROTATE
IMAGE ROTATE
By default, pictures taken in
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
SET
CANCEL
the correct orientation in the
monitor. It has no effect on pictures displayed on
a computer or other device.
1 Notes
• Protected pictures can not be rotated. Remove protection before rotating pictures (pg. 93).
• The camera may not be able to rotate pictures created with other devices.

To rotate a picture, play the picture back and select C IMAGE ROTATE in the playback menu
(pg. 89).

92

the selector down to rotate the
1 Press
picture 90 ° clockwise, up to rotate
the picture 90 ° counterclockwise.

MENU/OK to confirm the op2 Press
eration (to exit without rotating the
picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.

Using the Menus: Playback Mode

D PROTECT
Protect pictures from accidental deletion. The following options are available.
■ FRAME
Protect selected pictures.
the selector left or right to dis1 Press
play the desired picture.
PROTECT OK?

YES

UNPROTECT OK?

CANCEL

Picture not protected

YES

■ RESET ALL
Press MENU/OK to remove protection from all pictures, or
press DISP/BACK to exit without changing picture status.

SET ALL OK?
IT MAY TAKE A WHILE

YES

CANCEL

RESET ALL OK?
IT MAY TAKE A WHILE

YES

CANCEL

CANCEL

Protected picture

MENU/OK to protect the picture.
2 Press
If the picture is already protected,

steps 1–2 to protect addi3 Repeat
tional images. Press DISP/BACK to exit

If the number of pictures affected is very large, the display at right will appear in the
monitor while the operation
CANCEL
is in progress. Press DISP/BACK
to exit before the operation is complete.
3 Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 105).

Menus

pressing MENU/OK will remove protection from the image.

when the operation is complete.

■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK
to exit without changing
picture status.

93

Using the Menus: Playback Mode

E COPY
Copy pictures between internal memory and a memory card.
the selector up or down to
1 Press
highlight a INTERNAL MEMORY
y b CARD (copy pictures from
internal memory to the memory card) or
b CARD y a INTERNAL MEMORY (copy
pictures from a memory card to internal memory).
the selector right to display
2 Press
options for the highlighted item.
COPY
INTERNAL MEMORY
CARD

NEXT

94

CARD
FRAME
INTERNAL
ALLMEMORY
FRAMES

CANCEL

the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.

4 Press MENU/OK.
2 Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal memory, then remove the source card, insert the destination
card, and copy the pictures from internal memory.

Using the Menus: Playback Mode

■ FRAME
Copy selected frames.

COPY OK?
100-0001

YES

CANCEL

the selector left or right to dis1 Press
play the desired picture.

■ ALL FRAMES
Press MENU/OK to copy all
pictures, or press DISP/BACK
to exit without copying pictures.

COPY ALL OK?
100-0001
IT MAY TAKE
A WHILE

YES

CANCEL

3 Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 64).

2 Press MENU/OK to copy the picture.
steps 1–2 to copy additional
3 Repeat
images. Press DISP/BACK to exit when
the operation is complete.

Menus

95

Using the Menus: Playback Mode

F VOICE MEMO
To add a voice memo to a
still picture, select F VOICE
MEMO after displaying the
picture in playback mode.

30s

REC STANDBY

28s

RECORDING
START

Time remaining

CANCEL

1 Note
Voice memos can not be added to movies or protected pictures. Remove protection from pictures before
recording voice memos (pg. 93).

1

2 Press MENU/OK to start recording.

Hold the camera at a distance of about 20 cm
(8 in.) and face the microphone.

Blinks red
REC

RE-REC

MENU/OK again to end record3 Press
ing. Recording ends automatically
after 30 seconds.
FINISH

REC

RE-REC

Microphone

1 Notes
• If a voice memo already exists for the current picture, the options at right will be displayed. Select RE-REC to replace the existing memo.
• Voice memos are recorded as PCM-format WAV files (pg. 122) with a maximum size of
about 480 KB.

96

PLAYBACK MENU
ERASE
RED EYE REMOVAL
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO

BACK
RE-REC

Using the Menus: Playback Mode

Playing Voice Memos
Pictures with voice memos are indicated by a q icon during playback.
To play the voice memo, press the selector down. To pause, press the
selector down again; to end playback, press the selector up. Press the
selector left to rewind, right to fast forward. Volume controls can be displayed by pressing the MENU/OK button; press the selector up or down
to adjust the volume, and press MENU/OK again to resume playback.

15s

STOP

PAUSE

Progress is shown
in the monitor.
Progress bar

1 Note
The camera may not play voice memos recorded with other devices.
3 Caution
Do not cover the speaker during playback.

Speaker

Menus

97

Using the Menus: Playback Mode

G TRIMMING
To create a cropped copy of a picture, play the picture back and select G TRIMMING in the playback
menu (pg. 89).
the zoom control to zoom in and out and 2 Press MENU/OK. A confirmation dia1 Use
use the selector to scroll the picture until the
log will be displayed.
desired portion is displayed (to exit to singleframe playback without creating a cropped
copy, press DISP/BACK).
Zoom indicator
TRIMMING

YES

CANCEL

REC

Navigation window
shows portion of
image currently displayed in monitor

If the size of the final copy will be 6, OK will
be displayed in yellow.
2 Tip: Intelligent Face Detection
If the picture was shot with
Intelligent Face Detection
(pg. 22), g will be displayed
in the monitor. Press the g
button to zoom in on the
selected face.

98

REC OK?

TRIMMING

TRIMMING
YES

CANCEL

CANCEL

Copy size (2, 4, 5, or 6; see page
75) is shown at the top. Larger crops produce
larger copies; all copies have an aspect ratio of
4 : 3.
MENU/OK to save the cropped
3 Press
copy to a separate file.

Using the Menus: Playback Mode

H PLAYBACK TYPE
Choose the type of image displayed during playback from the following options:
• ALL: All photographs and movies are displayed.
• STILL: Only still pictures (photographs) taken with burst mode off are displayed.
• CONTINUOUS: Only photographs taken in burst mode are displayed.
• MOVIES: Only movies are displayed.
Note that the A ERASE > ALL FRAMES, K PRINT ORDER (DPOF) > RESET ALL, and D PROTECT >
RESET ALL options apply to all images, regardless of the option selected for H PLAYBACK TYPE.

Menus

99

The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display

the
menu for the current mode.

1.2 Press the selector up or down
to highlight M SET-UP.
1.3 Press the selector right to display the setup menu.
SET-UP
IMAGE DISP.
FRAME NO.
AF ILLUMINATOR
DIGITAL ZOOM
EVF/LCD MODE

1.5 SEC
CONT.
ON
OFF
30fps

a page.
2 Choose
2.1 Press the selector left or right
to choose a page.
2.2 Press the selector down to enter the menu.

100

Adjust settings.
3 3.1
Press the selector up or down
to highlight a menu item.
3.2 Press the selector right to display options for the highlighted item.
SET-UP

ENGLISH
AUTO POWER OFF
2 MIN
5 MIN
TIME DIFFERENCE
2 MIN
BACKGROUND COLOR
OFF
BATTERY TYPE
DISCHARGE

3.3 Press the selector up or down
to highlight an option.
3.4 Press MENU/OK to select the
highlighted option.

The Setup Menu

Setup Menu Options
Menu item

Menus

Description
Options
Default
Choose how long pictures are displayed after CONTINUOUS / 3 SEC / 1.5 SEC /
A IMAGE DISP.
1.5 SEC
shooting (pg. 102).
ZOOM (CONTINUOUS) / OFF
B FRAME NO.
Choose how files are named (pg. 103).
CONTINUOUS / RENEW
CONTINUOUS
W C AF ILLUMINATOR
Turn the AF-assist illuminator on or off (pg. 26).
ON / OFF
ON
D DIGITAL ZOOM
Enable or disable digital zoom (pg. 104).
ON / OFF
OFF
Choose 30 fps to increase battery life, 60 fps for
E EVF/LCD MODE
30 fps / 60 fps
30 fps
improved display quality.
F DATE/TIME
Set the camera clock (pg. 14).
—
—
G OPERATION VOL.
Adjust the volume of camera controls.
b (high) / c (mid) /
c
d (low) / eOFF (mute)
H SHUTTER VOLUME Adjust the volume of the shutter sound.
Adjust the volume for movie and voice memo
I PLAYBACK VOLUME
—
7
X
playback (pg. 104).
Control the brightness of the display (pg.
J LCD BRIGHTNESS
–5 – +5
0
104).
Format internal memory or memory cards
K FORMAT
—
—
(pg. 105).
La
Choose a language (pg. 14).
See page 127
ENGLISH
M AUTO POWER OFF
Choose the auto power off delay (pg. 105).
5 MIN / 2 MIN / OFF
2 MIN
N TIME DIFFERENCE Set the clock to local time (pg. 106).
h/g
h
O BACKGROUND COLOR Choose a color scheme.
—
—
Y
Specify the type of battery used in the camera
ALKALINE/NI-MH/LITHIUM
ALKALINE
T BATTERY TYPE
(pg. 9).
Discharge rechargeable Ni-MH batteries (pg.
P DISCHARGE
—
—
107).

101

The Setup Menu
Menu item
Q VIDEO SYSTEM

Z

R RESET

S CUSTOM RESET

Description
Choose a video mode for connection to a TV
(pg. 59).
Reset all settings except DATE/TIME, TIME DIFFERENCE, BACKGROUND COLOR, and VIDEO SYSTEM
to default values. A confirmation dialog will
be displayed, press the selector left or right to
highlight OK and press MENU/OK.
Reset all settings for mode C. A confirmation
dialog will be displayed, press the selector left
or right to highlight OK and press MENU/OK.

Options

Default

NTSC / PAL

—

—

—

—

—

A IMAGE DISP.
Choose an option other than OFF to display pictures in the monitor after shooting. Pictures can be displayed for 1.5 s (1.5 SEC), 3 s (3 SEC), or until the MENU/OK button is pressed (CONTINUOUS and ZOOM
(CONTINUOUS)). If CONTINUOUS is selected, the d button can be used to check exposure (pg. 49).
If ZOOM (CONTINUOUS) is selected, photos taken at qualities larger than 6 can be zoomed in to
check focus and other fine details (see page 48). Note that ZOOM (CONTINUOUS) is disabled in burst
mode (pg. 30) and when the mode dial is rotated to C, and that the colors displayed at settings of
1.5 SEC and 3 SEC may differ from those in the final picture.
1 Note
IMAGE DISP. is not available when n is selected in burst mode (pg. 30).

102

The Setup Menu

B FRAME NO.
New pictures are stored in image files named using a four-digit file number as- Frame number
signed by adding one to the last file number used. The file number is displayed
100-0001
during playback as shown at right. FRAME NO. controls whether file numbering
File
is reset to 0001 when a new memory card is inserted or the current memory card Directory
number
number
or internal memory is formatted.
• CONTINUOUS: Numbering continues from the last file number used or the first
available file number, whichever is higher. Choose this option to reduce the
number of pictures with duplicate file names.
• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
1 Notes
• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 120).
• Selecting R RESET (pg. 102) resets B FRAME NO. to CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cameras may differ.

Menus

103

The Setup Menu

D DIGITAL ZOOM
If ON is selected, selecting T at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and select W.
AUTO

J LCD BRIGHTNESS
Press the selector up or down
to choose display brightness
and press MENU/OK to select.

N 9

Zoom
indicator

Zoom indicator,
DIGITAL ZOOM off
W
Optical zoom (up to 15 ×)

Optical zoom
(up to 15 ×)

T
Digital
zoom

3 Caution
Digital zoom produces lower quality images than optical zoom.

104

VOLUME

7
SET

CANCEL

LCD BRIGHTNESS

0
SET

Zoom indicator,
DIGITAL ZOOM on
T W

I PLAYBACK VOLUME
Press the selector up or
down to choose volume
for movie and voice memo
playback and press MENU/OK
to select.

CANCEL

The Setup Menu

K FORMAT
FORMAT
Format internal memory or a
FORMAT OK?
memory card. If a memory ERASE ALL DATA
card is inserted in the camOK
CANCEL
era, b will be displayed in
SET
the dialog shown at right
and this option will format the memory card. If no
memory card is inserted, a will be displayed and
this option will format internal memory. Press the
selector left to highlight OK and press MENU/OK to
begin formatting.
3 Cautions
• All data—including protected pictures—will be deleted. Be sure important files have been copied to a
computer or other storage device.
• Do not open the battery cover during formatting.

M AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations are
performed. Shorter times increase battery life; if
OFF is selected, the camera must be turned off
manually. Note that regardless of the option selected, the camera will not turn off automatically
when connected to a printer (pg. 61) or computer
(pg. 70) or when a slide show is in progress (pg.
88).
2 Tip: Reactivating the Camera
To reactivate the camera after it has turned off automatically, use the G switch or press the a button for about a second (pg. 13).

Menus

105

The Setup Menu

N TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight g LOCAL.
1.2 Press the selector right to display the time difference.
TIME DIFFERENCE
12 / 31 / 2050 10:00 AM
12 / 31 / 2050 10:00 AM
00
SET

:

00

To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set
the clock to the time in your home time
zone, select h HOME. If g LOCAL is selected, g will be displayed in the monitor
for three seconds after the camera enters
shooting mode, and the date will be displayed in yellow.
AUTO

CANCEL

1.3 Press the selector left or right
to highlight +, –, hours, or minutes; press up or down to edit.
The minimum increment is 15
minutes.
1.4 Press MENU/OK when settings
are complete.
106

Switch between local time and your home
2 time
zone.

12/31/2050

10 : 00 AM

After changing time zones, check that the
date and time are correct.

The Setup Menu

P DISCHARGE (Ni-MH Batteries Only)
DISCHARGE
The capacity of rechargeable
DO NOT EXECUTE
NON Ni-MH
Ni-MH batteries may be tem- WITH
RECHARGEABLE BATTERIES
porarily reduced when new,
after long periods of disuse,
YES
CANCEL
or if they are repeatedly recharged before being fully discharged. Capacity
can be increased by repeatedly discharging the
batteries using the P DISCHARGE option and
recharging them in a battery charger (sold separately). Do not use P DISCHARGE with non-rechargeable batteries, and note that the batteries
will not discharge if the camera is powered by an
optional AC adapter and DC coupler.

the selector left or right to
2 Press
highlight OK.
MENU/OK to begin discharging
3 Press
the batteries. When the batteries
are fully discharged, the battery level
indicator will blink red and the camera will turn
off. To cancel the process before the batteries
are fully discharged, press DISP/BACK.

P DISCHARGE displays
1 Selecting
the message shown above. Press
MENU/OK.

IT MAY TAKE A WHILE
FOR DISCHARGING
OK

CANCEL

Menus

DISCHARGE
DISCHARGE OK?

SET

107

Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Computer Related

■ Audio/Visual
TV (available from
third-party suppliers)

USB
Computer (available from
third-party suppliers)

Audio/visual
output
SD/SDHC
memory card

■ Printing
USB

Technical Notes

PictBridge-compatible printer
(available from third-party
suppliers)

SD card slot or card reader

Printer (available from
third-party suppliers)

The FUJIFILM HD-S2 HDTV Connection Kit (Sold Separately)
To enjoy high-definition images, connect the camera to a
high definition TV using the HD component cable, or use
the wireless remote to control the camera from a remote
location.

108

HD-TV
RC-S2

PR/CR
PB/CB
Y
L
AUDIO
R

Optional Accessories

Accessories from FUJIFILM
As of August 2008, the following optional accessories were available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or
visit http://www.fujifilm.com/products/digital_cameras/index.html.
• FUJIFILM HD-S2 HDTV connection kit: Contains a remote control and an HD cable for connecting the camera to High Definition (HD) devices.

• AC-5VX AC adapter (requires CP-04 DC coupler): Use for extended playback or when copying pictures
to a computer (shape of adapter and plug vary with region of sale).
• CP-04 DC coupler: Connect the AC-5VX AC adapter to the camera.
Technical Notes

Using the CP-04 DC coupler
1. Load the DC coupler.
Check that the camera is turned off before opening the battery cover. Open the battery
cover and load the DC coupler as illustrated. Check that the DC coupler is firmly held
in place.
2. Close the battery cover.
Pass the DC coupler cable through its respective hole (A). Close the battery cover.

109

Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an extended period, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as near
a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet
• in contact with volatile chemicals such as pesticides
• next to rubber or vinyl products
■ Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
110

■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour before turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid
has been applied. Care should be taken to avoid
scratching the lens or monitor. The camera body
can be cleaned with a soft, dry cloth. Do not use
alcohol, thinner, or other volatile chemicals.
Travelling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.

Troubleshooting
Power and Battery
Problem

Possible cause
The batteries are exhausted.
The batteries are not in the correct orientation.
The battery-chamber cover is not latched.
The camera does
The AC adapter and DC coupler are not connot turn on.
nected properly.
The camera has been left for an extended
period with no batteries inserted and the
AC adapter/DC coupler unplugged.

Power
supply

Troubleshooting

Solution
Page
Insert fresh or fully-charged spare batteries.
8
Re-insert the batteries in the correct orienta8
tion.
Latch the battery-chamber cover.
9
Make sure that the AC adapter and DC coupler
—
are properly connected.
After inserting the batteries or connecting the
AC adapter/DC coupler, wait a few moments —
before turning the camera on.
Warm the batteries by placing them in a pocket
The batteries are cold.
or other warm place and re-insert them in the v
camera immediately before taking a picture.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
—
Discharge Ni-MH batteries using the P DISThe batteries are new, have been left unused CHARGE option and recharge them in a batThe battery runs for an extended period, or have been re- tery charger (sold separately). If the batteries
107
down quickly.
charged without first being fully discharged do not hold a charge after repeated discharging and recharging, they have reached the end
(rechargeable Ni-MH batteries only).
of their service life and must be replaced.
Turn E HIGH SPEED SHOOTING off to reE HIGH SPEED SHOOTING is on.
—
duce the drain on the battery.
u CONTINUOUS AF is selected for F
Select a different focusing option.
83
FOCUSING.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The camera turns
The AC adapter or DC coupler has been dis- Make sure that the AC adapter and DC coupler
off suddenly.
—
connected.
are properly connected.

111

Troubleshooting
Menus and Displays
Problem
Possible cause
Solution
Menus and displays are English is not selected for the L a
Select ENGLISH.
not in English.
option in the setup menu.

Page
14

Shooting
Problem

Taking
pictures

Focus

112

No picture is
taken when
the shutter
button is
pressed.
The monitor
goes dark after
shooting.
The camera
does not
focus.

Possible cause
Memory is full.
Memory is not formatted.
There is dirt on the memory card contacts.
The memory card is damaged.
The batteries are exhausted.
The camera has turned off automatically.

Solution
Page
Insert a new memory card or delete pictures. 10, 53
Format the memory card or internal memory. 105
Clean the contacts with a soft, dry cloth.
11
Insert a new memory card.
10
Insert fresh or fully-charged spare batteries.
8
Turn the camera on.
13

The flash has fired.

The monitor may darken while the flash
charges. Wait for the flash to charge.

The subject is close to the camera.
The subject is far away from the camera.
The subject is not suited to autofocus.

Select macro mode.
Cancel macro mode.
Use focus lock or manual focus.

28
27
24, 83

Troubleshooting
Solution
Choose a different shooting mode.

Page
36

Remove the obstructions.
Change the composition so that the subject’s 22
face occupies a larger area of the frame.
Ask the subject to hold their head straight.
Hold the camera straight.
17
Shoot in bright light.
—
Recompose the picture or turn face detection
22, 24
off and frame the picture using focus lock.
Choose a different shooting mode.

27

Insert fresh or fully-charged spare batteries.

8

Raise the flash.
Wait for the flash to charge.
Choose a different shooting mode.
Insert fresh or fully-charged spare batteries.
Turn super macro and burst modes off.

28
28
36,
123
8
27, 30

Choose a different shooting mode.

36,
123

Position the subject in range of the flash.
Hold the camera correctly.
Choose a slower shutter speed.

126
17
42

Troubleshooting

Problem
Possible cause
Face detection The camera is in F mode or one of the folnot available. lowing SP modes: M, N, P, V, W, or X.
The subject’s face is obscured by sunglasses, a
hat, long hair, or other objects.
The subject’s face occupies only a small area
Intelligent
No face is
of the frame.
Face
detected.
Detection
The subject’s head is tilted or horizontal.
The camera is tilted.
The subject’s face is poorly lit.
Wrong subject The selected subject is closer to the center of
selected.
the frame than the main subject.
Macro mode is The camera is in F mode or one of these SP
Close-ups
not available. modes: L, M, N, O, P, Q, R, S, or U.
SP (X)
Can not shoot. The batteries are low.
mode
The flash is lowered.
The flash is charging.
The flash does
D, SP (M, P, T, V) or F mode.
not fire.
The batteries are exhausted.
The camera is in super macro or burst mode.
Flash
Some flash
modes are not The camera is not in P or SP (L) mode.
available.
The flash does The subject is not in range of the flash.
not fully light The flash window is obstructed.
the subject.
Shutter speed is faster than 1/1000 s.

113

Troubleshooting
Problem
Pictures are
blurred.
Problem
images

114

Pictures are
mottled.
Vertical lines
appear in
pictures.

Possible cause
The lens is dirty.
The lens is blocked.
s is displayed during shooting and the focus frame is displayed in red.
k is displayed during shooting.
The ambient temperature is high and the subject is poorly lit.

Solution
Clean the lens.
Keep objects away from the lens.

Page
110
17

Check focus before shooting.

118

Use the flash or a tripod.
This is normal and does not indicate a malfunction. Choose a lower sensitivity.

28
74

The camera has been used continuously at Turn the camera off and wait for it to cool
high temperatures.
down.

—

Turn the camera off before connecting the AC
adapter/DC coupler. Leaving the camera on
can result in corrupted files or damage to the
memory card or internal memory.

—

Recording

Pictures are
Power was interrupted during shooting.
not recorded.

Continuous

Only one pic- The self timer is on with n selected in burst
Turn the self-timer off.
ture is taken. mode.

79

Troubleshooting
Playback
Problem
Pictures are
grainy.

Solution

Page

—

—

—

41, 75

Select a different option.

99

Turn silent mode off.
Adjust playback volume.
Hold the camera correctly during recording.
Hold the camera correctly during playback.

20
104
96
97

Remove protection using the device with
which it was originally applied.

93

Turn the camera off before opening the bat- 13,
tery-chamber cover.
103

Troubleshooting

Possible cause
The pictures were taken with a different make or
model of camera.
The pictures were taken in SP (X) mode, at an
Playback zoom
Pictures
image size of 6, or with a different make or
unavailable.
model of camera.
Pictures are
The wrong option is selected for H PLAYBACK
not displayed. TYPE.
No sound in The camera is in silent mode.
voice memo Playback volume is too low.
Audio
and movie
The microphone was obstructed.
playback.
The speaker is obstructed.
Selected picSome of the pictures selected for deletion are
Deletion tures are not
protected.
deleted.
File numberThe battery-chamber cover was opened while
Frame no. ing is unexthe camera was on.
pectedly reset.

115

Troubleshooting
Connections
Problem

TV

No picture or
sound.

No color.
The computer does not
Computer
recognize the
camera.
Pictures can
not be printed.
Only one copy
PictBridge
is printed.
The date is not
printed.

116

Possible cause
The camera is not properly connected.
An A/V or HD cable was connected during
movie playback.
Input on the television is set to “TV”.
The camera is not set to the correct video standard.
The volume on the television is too low.
The camera is not set to the correct video standard.

Solution
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO”.
Match the camera Q VIDEO SYSTEM setting to the TV.
Adjust the volume.
Match the camera Q VIDEO SYSTEM setting to the TV.

The camera is not properly connected.

Connect the camera correctly.

70

The camera is not properly connected.
The printer is off.

Connect the camera correctly.
Turn the printer on.

61
—

The printer is not PictBridge-compatible.

—

Page
59
58, 59
—
102
—
102

—

Troubleshooting
Miscellaneous
Problem

Possible cause

Nothing happens
Temporary camera malfunction.
when the shutter button is pressed.
The batteries are exhausted.
The camera does not
Temporary camera malfunction.
function as expected.

Solution
Page
Remove and reinsert the batteries or disconnect and reconnect the AC adapter/DC cou- 8
pler.
Insert fresh or fully-charged spare batteries.
8
Remove and reinsert the batteries or disconnect and reconnect the AC adapter/DC
8, 130
coupler. If the problem persists, contact your
FUJIFILM dealer.

Troubleshooting

117

Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
o (red)
n (blinks red)
k

Description
Batteries are low.
Batteries are exhausted.
Slow shutter speed. Picture may be blurred.

s
(displayed in red
with red focus
frame)

The camera can not focus.

Aperture or shutter The subject is too bright or too dark. The picspeed shown in red ture will be over- or under-exposed.
FOCUS ERROR
ZOOM ERROR
Camera malfunction.
LENS CONTROL ERROR
No memory card inserted when COPY is seNO CARD
lected in the playback menu.
The memory card or internal memory is not
formatted or the memory card was formatted
in a computer or other device.
CARD NOT INITIALIZED
The memory card contacts require cleaning.

PROTECTED CARD
BUSY

118

Camera malfunction.
The memory card is locked.
The memory card is incorrectly formatted.

Solution
Insert fresh or fully-charged spare batteries.
Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 24).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
If the subject is dark, use the flash.
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer (pg. 130).
Insert a memory card.
Format the memory card or internal memory using the
K FORMAT option in the camera setup menu (pg.
105).
Clean the contacts with a soft, dry cloth. If the message
is repeated, format the memory card (pg. 105). If the
message persists, replace the memory card.
Contact a FUJIFILM dealer (pg. 130).
Unlock the memory card (pg. 10).
Use the camera to format the memory card (pg. 105).

Warning Messages and Displays
Warning

CARD ERROR

Description
Solution
The memory card is not formatted for use in
Format the memory card (pg. 105).
the camera.
Clean the contacts with a soft, dry cloth. If the message
The memory card contacts require cleaning or
is repeated, format the memory card (pg. 105). If the
the memory card is damaged.
message persists, replace the memory card.
Incompatible memory card.
Use a compatible memory card.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 130).

Troubleshooting

b MEMORY FULL
a MEMORY FULL
The memory card or internal memory is full; Delete pictures or insert a memory card with more free
space.
INTERNAL MEMORY IS FULL pictures can not be recorded or copied.
INSERT A NEW CARD
Re-insert the memory card or turn the camera off
Memory card error or connection error.
and then on again. If the message persists, contact a
FUJIFILM dealer (pg. 130).
WRITE ERROR
Not enough memory remaining to record ad- Delete pictures or insert a memory card with more free
ditional pictures.
space.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 105).
formatted.
The file is corrupt or was not created with the
The file can not be played back.
camera.
Clean the contacts with a soft, dry cloth. If the message
READ ERROR
The memory card contacts require cleaning. is repeated, format the memory card (pg. 105). If the
message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 130).

119

Warning Messages and Displays
Warning

FRAME NO. FULL

TOO MANY FRAMES
CAN NOT EXECUTE
F CAN NOT EXECUTE
X CAN NOT EXECUTE
PROTECTED FRAME
u ERROR
b NO IMAGE
a NO IMAGE
6 CAN NOT TRIM
CAN NOT TRIM
DPOF FILE ERROR
CAN NOT SET DPOF
F CAN NOT SET DPOF
CAN NOT ROTATE
F CAN NOT ROTATE

120

Description

Solution
Format the memory card and select RENEW for the
B FRAME NO. option in the M SET-UP menu.
The camera has run out of frame numbers (curTake a picture to reset frame numbering to 100-0001,
rent frame number is 999-9999).
then return to the B FRAME NO. menu and select
CONTINUOUS.
Date for which more than 4,999 pictures exist
Choose a different date.
selected in sort-by-date view.
Red-eye reduction can not be applied to the
—
selected picture or movie.
The shutter button was pressed in SP (X)
Insert fresh or fully-charged spare batteries.
mode when the battery was low.
An attempt was made to delete, rotate, or add Remove protection before deleting, rotating, or adding
a voice memo to a protected picture.
voice memos to pictures.
Voice memo file is corrupt.
The voice memo can not be played back.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 130).
The source device selected in the playback
Select a different source.
COPY menu contains no pictures.
An attempt was made to crop a 6 picture.
The picture selected for cropping is damaged These pictures can not be cropped.
or was not created with the camera.
The DPOF print order on the current memory Copy the pictures to internal memory and create a new
card contains more than 999 images.
print order.
The picture can not be printed using DPOF.
—
Movies can not be printed using DPOF.
—
The picture can not be rotated.
—
Movies can not be rotated.
—

Warning Messages and Displays
Warning
Description
Solution
PRESS AND HOLD
An attempt was made to adjust the volume
THE DISP BUTTON TO
Exit silent mode before adjusting the volume.
with the camera in silent mode.
DEACTIVATE SILENT MODE
A connection error occurred while pictures
Confirm that the device is turned on and that the USB
COMMUNICATION ERROR were being printed or copied to a computer or
cable is connected.
other device.
Check printer (see printer manual for details). To resume
PRINTER ERROR
Printer out of paper or ink, or other printer er- printing, turn the printer off and then turn it back on.
ror.
Check printer (see printer manual for details). If printing
PRINTER ERROR
does not resume automatically, press MENU/OK to resume.
RESUME?
Movies and some pictures created with other devices
An attempt was made to print a movie, a pic- can not be printed. If the picture was created with the
CAN NOT BE PRINTED ture not created with the camera, or a picture camera, check the printer manual to confirm that the
in a format not supported by the printer.
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.

Troubleshooting

121

Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored
in internal memory or on a memory card. The information in the order includes the pictures to be
printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the
camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
MPEG (Motion Picture Experts Group): MPEG-4 is a movie file format that uses compression to create files suitable
for web distribution. MPEG-4 files can be played in QuickTime 7.0 or later.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources, such
as the sun or reflected sunlight, appear in the frame.

Appendix

122

WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as “white balance.”

Flash Mode and Shooting Mode
The flash modes available depend on the shooting mode (pg. 36). The flash modes available in mode
C depend on the mode selected when settings were saved.
■ g FACE DETECTION h REMOVAL OFF or g OFF
Shooting mode
SP
O P Q R
— — — ✔
— — ✔ ✔
✔ — — —

S
✔
✔
—

T
—
—
—

U
✔
—
—

Shooting mode
SP
Flash mode A E D C B L M N O P Q R
—
— ✔
i
✔
✔ — — ✔ ✔
j
✔
✔ — ✔ ✔ ✔ NA NA — NA ✔ ✔
k
— — — — — ✔
— —
✔

S
✔
✔
—

T
—
—
—

U V W X P S M
✔
✔ — —
— NA NA NA ✔ ✔ ✔
—
✔ — —

Flash mode A E D C
AUTO
✔
✔ — —
l
✔
✔ — ✔
m
— — — —

B
✔
✔
—

L
✔
✔
✔

M
—
—
—

N
✔
✔
—

V
—
—
—

W
—
✔
—

X
✔
✔
✔

P S M
✔ — —
✔ ✔ ✔
✔ — —

■ g FACE DETECTION h REMOVAL ON

Appendix

123

Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at different image qualities. All figures are approximate; file size varies with the scene recorded, producing wide variations in
the number of files that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
9 7
8
1280 × 720 640 × 480 320 × 240
Image size (pixels) 3648 × 2736 3648 × 2432 3648 × 2056 2592 × 1944 2048 × 1536 1920 × 1080 1600 × 1200 640 × 480
(HD)
(VGA)
(QVGA)
File size
5.0 MB 2.5 MB 2.3 MB
1.9 MB
1.3 MB
810 KB
700 KB
650 KB
160 KB
—
—
—
Internal memory
11
22
25
30
44
69
80
86
354
49 s
2 min.
8.5 min.
(approx. 55 MB)
512 MB
100
190
220
260
380
600
700
750
3,090
7 min. 20 min. * 70 min. *
1 GB
200
390
440
520
770
1,210
1,400
1,510
6,190
10 min. 40 min. * 150 min. *
2 GB
400
790
890
1,050
1,550
2,380
2,810
2,950
12,400
20 min. * 80 min. * 310 min. *
4 GB
800 1,590
1,790
2,100
3,100
4,770
5,640
5,900
24,820
50 min. * 160 min. * 630 min. *
8 GB
1,610 3,190
3,600
4,220
6,220
9,570
11,310
11,850
49,800 110 min. * 330 min. * 1260 min. *
16 GB 3,240 6,400
7,230
8,460
12,480
19,200
22,700
23,780
99,880 230 min. * 660 min. * 2530 min. *
0 F 0 N 13:2

316:9

2

4

516:9

5

6

SD card

SDHC
card

* Total length of all movie files. Individual movies can not exceed 4 GB in size or 15 minutes in length.

124

Specifications
System
Model
Effective pixels
CCD
Storage media
File system

Appendix

FinePix S2000HD digital camera
10 million
1/2.33 -in., square-pixel Bayer CCD with primary color filter
• Internal memory (approx. 55 MB)
• SD/SDHC memory cards (see page 10)
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format
(DPOF)
File format
• Still pictures: Exif 2.2 JPEG (compressed)
• Movies: ISO standard MPEG-4 compliant
• Audio: WAV (8-bit, 11.025 KHz sampling)
Image size (pixels)
• 0F: 3,648 × 2,736
• 0N: 3,648 × 2,736
• 13:2 : 3,648 × 2,432 • 316:9 : 3,648 × 2,056
• 2 : 2,592 × 1,944
• 4 : 2,048 × 1,536
• 516:9 : 1,920 × 1,080 • 5 : 1,600 × 1,200
• 6 : 640 × 480
File size
See page 124
Lens
Fujinon 15 × optical zoom lens, F/3.5 (wide angle) – 5.4 (telephoto)
Focal length
f=5 mm–75 mm (35-mm format equivalent: 28 mm–414 mm)
Digital zoom
• Still pictures: Approx. 5.7 × (up to 85.5 × when combined with optical zoom)
• HD movies: 3 ×
• VGA and QVGA movies: 2 ×
Aperture
F/3.5 and 7.0 (wide angle); F/5.4 and 10.8 (telephoto)
Focus range (distance from Approx. 70 cm (2 ft. 4 in.)–infinity (wide angle); 250 cm (8 ft. 2 in.)–infinity (telephoto)
front of lens)
Macro: approx. 10 cm–100 cm/4 in.–3 ft. 3 in. (wide angle); 70 cm–350 cm/2 ft. 4 in.–11 ft. 6 in. (telephoto)
Super macro: approx. 1 cm–30 cm/0.4 in.–12 in. (wide angle)
High-speed shooting: approx. 100 cm (3 ft. 3 in.)–infinity (wide angle); 250 cm (8 ft. 2 in.)–infinity (telephoto)
Sensitivity
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200 (image sizes 2 or smaller), 6400 (image sizes 2 or smaller); AUTO, AUTO (400), AUTO (800), AUTO (1600)
Metering
256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Programmed autoexposure , shutter-priority autoexposure, manual exposure
Exposure compensation
–2 EV – +2 EV in increments of 1/3 EV (P, S, M and X modes)

125

Specifications
System
Scene modes

D (NATURAL LIGHT), C (NATURAL & l), L (PORTRAIT), M (LANDSCAPE), N (SPORT), O (NIGHT),
P (FIREWORKS), Q (SUNSET), R (SNOW), S (BEACH), T (MUSEUM), U (PARTY), V (FLOWER),
W (TEXT), X (AUCTION)
Picture stabilization
• Still pictures: Optical stabilization
• Movies: Digital stabilization
Intelligent Face Detection Available
Shutter speed
4 s–1/1,000 s (slowest shutter speed: P 4 s; O 3 s); combined mechanical and electronic shutter
Continuous
• p: up to 1.1 fps; max. 3 frames
• o: up to 1.1 fps; max. 3 frames
• n: up to 0.5 fps; maximum number of frames varies with image size and available memory
• m: up to 7 fps; max. 33 frames
• l: up to 13.5 fps; max. 33 frames
Bracketing
±1/3 EV, ±2/3 EV, ±1 EV
Focus
• Mode: Single AF, continuous AF, manual
• Focus-area selection: CENTER, MULTI, AREA
• Autofocus system: Contrast-detect TTL AF with AF-assist illuminator (effective range approx. 180 cm/5 ft. 11 in.)
White balance
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent lighting; custom white balance
Self-timer
Off, 2 sec, 10 sec
Flash
Auto flash with CCD flash control (using monitor pre-flashes) and manual pop-up; effective range
when sensitivity is set to AUTO is approx. 50 cm–640 cm/1 ft. 8 in.–21 ft. (wide angle), 50 cm–410 cm/1 ft.
8 in.–13 ft. (telephoto), or 70 cm–300 cm/2 ft. 4 in.–9 ft. 10 in. (macro mode)
Flash modes
Auto, fill flash, off, slow sync (red-eye removal off ); auto with red-eye reduction, fill flash with red-eye
reduction, off, slow sync with red-eye reduction (red-eye removal on)
Electronic viewfinder (EVF) 0.2-in., 200k-dot color LCD monitor
Frame coverage
Approx. 97% (shooting), 100% (playback)
Monitor
2.7-in., 230k-dot low-temperature polysilicon high-transmission (WV film) TFT color LCD monitor
Frame coverage
Approx. 97% (shooting), 100% (playback)
Movies
Camera can record movies with monaural sound and a frame size of HD (9; 1280 × 720), VGA
(7; 640 × 480), or QVGA (8; 320 × 240) at a frame rate of 30 fps

126

Specifications
System
Shooting options
Playback options
Other options

Input/output terminals
A/V OUT (audio/video output)
HD OUT (high-definition output)
Digital input/output
DC IN

Instant zoom, zoom bracketing, Intelligent Face Detection with red-eye removal, high-speed shooting, best framing, post-shot assist, frame number memory, and histogram display
Intelligent Face Detection, red-eye removal, micro thumbnail, multi-frame playback, sort-by-date,
cropping, slide show, image rotation, voice memo, histogram display, and exposure warning
PictBridge, Exif Print, FinePix COLOR, language selection (Simplified Chinese, Traditional Chinese, Czech, Dutch, English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese,
Russian, Spanish, Swedish, Thai, and Turkish), time difference, FinePix photo mode (f mode), battery
discharge

8-pin multi-connector for NTSC or PAL output with monaural sound
10-pin component/D4 output; still pictures output at 1080i
USB 2.0 High Speed; shares A/V OUT connector
For use with CP-04 DC coupler connected to AC-5VX AC adapter (AC adapter and DC coupler sold separately)

Appendix

127

Specifications
Power supply/other
Power sources

Battery life

Camera dimensions
Camera weight
Shooting weight
Operating conditions

128

• AA alkaline batteries (×4)
• AA lithium batteries (×4; sold separately)
• AA rechargeable nickel-metal hydride (Ni-MH) batteries (×4; available from third-party suppliers)
• AC-5VX AC adapter and CP-04 DC coupler (sold separately)
Approx. 300 frames (alkaline batteries of the type supplied with the camera), 650 frames (lithium batteries), or 400 frames (Ni-MH batteries), based on CIPA (Camera and Imaging Products Association)
standard; measured at 23 °C (73 °F) with the monitor on, pictures recorded to an SD memory card, the
camera zoomed from widest angle to maximum zoom and back once every 30 s, the flash fired at
full power with every other shot, and the camera turned off and then on again every 10 shots. Note
that the number of shots that can be taken varies with battery make and charge state, temperature,
and shooting conditions.
111.0 mm × 78.9 mm × 75.7 mm/4.4 in. × 3.1 in. × 3.0 in. (W × H × D), excluding batteries and accessories
Approx. 390 g/13.8 oz., excluding batteries, accessories, and memory cards
Approx. 480 g/16.9 oz., including batteries and memory card
• Temperature: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity: 10%–80% (no condensation)

Specifications
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

Appendix

129

FUJIFILM Digital Camera Worldwide Network
Contact your local distributor (see list below) for repairs and technical support. Please present the warranty and purchase receipt when requesting repairs; refer to the warranty card for the conditions of the
warranty. Technical support may not be available for models not handled by the local distributor. The
following information is subject to change without notice.
NORTH AMERICA
Canada

FUJIFILM Canada Inc.

U.S.A.

FUJIFILM U.S.A., Inc.

Technical support
Repair service
Technical support
Repair service

TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
TEL 1-800-263-5018 http://www.fujihelp.ca
TEL 800-800-3854 digitalinfo@fujifilm.com
TEL 800-659-3854

Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support
Repair service
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs

TEL +54-11-4836-1000 servtec@imageneinformacion.com.ar
TEL +591 33 44 1129 gciagral@bibosi.scz.entelnet.bo
TEL 0800-12-8600 camarasdigitais@fujifilm.com.br
TEL 56-2-6781200 serviciotecnico@reifschneider.cl
TEL +57 1 338-0299 animex@etb.net.co
TEL 593-72-835526
TEL +593 783 5526 portiz@fujifilm.com.ec
TEL (52-55) 5263-55000 eizquierdo@fujifilm.com.mx
TEL (52-55) 5366-5150/56/57 cpalma@fujifilm.com.mx
TEL +595 21 444256 jmarbulo@fujifilm.com.py
TEL +51 14 33 5563 jalvarado@fujifilm.com.pe
TEL +598-2-9002004 fotocam@adinet.com.uy
TEL (05982) 419 4542 kiel@fujifilm.com.uy
TEL 0212-2022300 hellmund@hellmund.com

Technical support & repairs
Technical support & repairs
Technical support
Repair service

TEL 0043 1 6162606/51 or 52 kamera.service@fujifilm.at
TEL 3210242090 info@fuji.be
TEL 38512319060 dsaravanja@fujifilm.hr
TEL 38512316228 info@fujifilm.hr

CENTRAL AND SOUTH AMERICA
Argentina
Bolivia
Brazil
Chile
Colombia
Ecuador
Mexico

Imagen e informacion S.A.
Reifschneider Bolivia Ltda.
FUJIFILM do Brasil Ltda.
Reifschneider SA
Animex de Colombia Ltda.
Espacri Cia Ltda
Importaciones Espacri Cia. Ltda.
Fujifilm de Mexico, S.A. de C.V.

Paraguay
Peru
Uruguay
Uruguay
Venezuela

Errece S.R.L.
Procesos de Color S.A.
Fotocamara S.R.L.
Kiel S.A.
C. Hellmund & Cia Sa

EUROPE
Austria
Belgium
Croatia

130

Fuji Film Oesterreich
Belgian Fuji Agency
I&I d.o.o.

EUROPE
Cyprus

Czech Republic
Denmark
Finland
France
Germany

PMS IMAGING LTD
Doros Neophytou
CAMERA REPAIRS
Fujifilm Cz., s.r.o.
AWH servis
Fujifilm Danmark A/S
Fuji Finland Oy
FUJIFILM France
FUJIFILM Electronic Imaging Europe
GmbH
FUJIFILM HELLAS S.A.
Fujifilm Hungary Ltd.

Iceland
Italy

Icephoto (Ljosmyndavorur)
FujiFilm Italia S.r.l.

Lithuania
Malta
Norway

Fujifilm Lithuania
Ciancio (1913) Co.Ltd.
Fujifilm Norge AS

Poland
Portugal

Fujifilm Polska Distribution Sp.
z o.o.
Fujifilm Portugal, Lda

Romania
Russia

CTS-Cardinal Top Systems Ltd
ZAO "Fujifilm RU"

Slovakia

Fujifilm Slovakia s.r.o.

Spain

Fujifilm Espana S.A.

Technical support
Repair service
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs

TEL 00420 234 703 411 fricman@fujifilm.cz
TEL 00420 222 721 525 awh@awh.cz
TEL 0045 45662244 fujifilm@fujifilm.dk
TEL +358 9 825951 www.fuji.fi fuji@fuji.fi
direction.technique@pm2s.fr
Tel 0180 / 589 89 80* service@fujifilm-digital.com
*

0,14 EUR pro Minute aus dem deutschen Festnetz, abweichende
Preise aus Mobilfunknetzen möglich,Stand bei Drucklegung.

Technical support & repairs
Technical support
Repair service
Technical support & repairs
Call center
Repair service
Technical support & repairs
Technical support & repairs
Technical support

TEL 0030 210 9404100 fujifilm@fujifilm.gr
TEL 3612389410 fujifilm@fujifilm.hu
TEL 3613633777
TEL 354 568 0450 framkollun@fujifilm.is
TEL 039-0267978181 info@fujifilm.it
TEL 039-6058294 FAX 039-6058295
TEL 370-5-2130121 info@fujifilm.lt
TEL 0356-21-480500 info@fujifilm.com.mt
TEL 0047-02273
http://www.fujifilm.no/ mailto:post@fujifilm.no
Repair service
TEL 0047-55393880
http://www.camera.no/mailto:service@camera.no
Technical support
TEL +48-22-517-66-00 fujifilm@fujifilm.pl
Repair service
TEL +48-22-886-94-40 serwis@fujifilm.pl
Technical support
TEL (351) 226 194 237 finepix@fujifilm.pt
Repair service
TEL (351) 226 194 200 cameras@fujifilm.pt
Technical support & repairs TEL 4021-230-09-82 cts_tirla@hotmail.com
Technical support
TEL +7-495-956-98-58 info@fujifilm.ru
Repair service
TEL +7-495-956-98-58 www.fujifilm.ru
Technical support
TEL 00421 2 33 595 107 fujifilm@fujifilm.sk
Repair service
TEL 00421 2 33 595 119 servis@fujifilm.sk
Technical support & repairs TEL 902012535
http://www.fujifilm.es/soporte/ tallersat@fujifilm.es

Appendix

Greece
Hungary

Technical support & repairs TEL 35722746746 mariosashiotis@fujifilm.com.cy
Technical support & repairs TEL 35722314719 dorosn@logosnet.cy.net

131

EUROPE
Sweden

Fujifilm Sverige AB

Switzerland /
Lichtenstein
The Netherlands

Fujifilm (Switzerland) AG

Turkey

FUJIFILM Electronic Imaging
Nederland
Fujifilm Turkiye Sinfo A.S.

U.K.

FUJIFILM UK Ltd.

Ukraine

Image Ukraine CJSC

Technical support
TEL 46 8 506 141 70 kamera@fujifilm.se
Repair service
TEL 46 8 506 513 54 kameraverkstaden@fujifilm.se
Technical support & repairs TEL +41 44 855 5154 RepairCenter@fujifilm.ch
Technical support
Repair service
Technical support
Repair service
Technical support
Repair service
Technical support & repairs

TEL +31(0)102812500 helpdesk@fujifilm-digital.nl
TEL +31(0)102812520 camerareparaties@fujifilm-digital.nl
TEL +90 212 696 5090 csarp@fujifilm.com.tr
TEL +90 212 696 5090 servis@fujifilm.com.tr
TEL +44 (0)8700 841310 fujitec@fuji.co.uk
TEL +44 (0)8700 841314 fujitec@fuji.co.uk
TEL +380-44-4909075 d@fujifilm.ua

Technical support & repairs
Technical support
Repair service
Technical support & repairs

TEL (+98-21)2254810-19 fuka@neda.net
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
TEL (+ ) 972 3 9250666 khaim@shimone.com
TEL 009626-4646387 gstores@go.com.jo

Technical support & repairs
Technical support
Technical support
Technical support
Repair service
Technical support & repairs
Technical support
Repair service

TEL +961 1 252474 fototek@antakiholding.com
TEL 00974 44 66 175 prabu@techno-blue.com
TEL 96626978756 service@fujifilm.com.sa
TEL + 963 11 2218049 f.t.c@Net.SY
TEL + 963 21 4641903 filmtradin@Net.SY
TEL + 971-4-2823700 photography@grandstores.ae
TEL 00967-1-503980
TEL 00967-1-503977

MIDDLE EAST
Iran
Israel

Tehran Fuka Co.
Shimone Group Ltd.

Jordan
Lebanon
Qatar
Saudi Arabia
Syria

Grand Stores Al- Abdali,
Amman / Jordan
Fototek S.A.R.L.
Techno Blue
Emam Distribution Co. Ltd.
Film Trading Company

U.A.E.
Yemen

Grand Stores
Al-Haidary Trading

AFRICA
Egypt
Kenya
South Africa

Foto Express Egypt
Fuji Kenya Ltd
Cameratek CC.

Technical support & repairs TEL (202) 7762062 fotoegypt@access.com.eg
Repair service
TEL (254-20)4446265-8 info@fujifilm.co.ke
Technical support & repairs TEL +27 11 251 2400 www.cameratek.co.za

FUJIFILM Australia Pty Ltd
Brijlal & Co. Ltd
Phocidis SARL

Technical support & repairs TEL 1800 226 355 digital@fujifilm.com.au
Technical support & repairs TEL (679)3304133 kapadia@connect.com.fj
Technical support & repairs TEL (00 687) 25-46-35 phocidis@phocidis.nc

OCEANIA
Australia
Fiji
New Caledonia

132

OCEANIA
New Zealand
Papua New
Guinea

Fujifilm NZ Ltd
Oceania PNG Limited

Technical support & repairs TEL +64-9-4140400 glenn.beaumont@fujifilm.co.nz
Technical support
TEL +675 3256411 oceania@daltron.com.pg

Fuji Photo Products Co., Ltd.
PT. Modern Internasional, Tbk.
FUJIFILM (Malaysia) Sdn. Bhd.

Technical support & repairs
Technical support & repairs
Technical support
Repair service
Technical support

ASIA
Hong Kong
Indonesia
Malaysia
Philippines

Singapore
South Korea

Taiwan
Thailand

Vietnam

TEL (852)2406 3287 rsd@chinahkphoto.com.hk
TEL +62 021 45867187 assd_kmrsrv@modernphoto.co.id
TEL 603-55698388 technical@fujifilm.com.my
TEL 603-55698388 camera@fujifilm.com.my
YKL Development & Trdg. Corp.
TEL 632-7436601~06
info@yklcolor.com digital@yklcolor.com
Repair service
TEL 632-7436601~06 techop_services@yklcolor.com
FUJIFILM (Singapore) Pte Ltd
Technical support & repairs TEL 65-6380 5557 service@fujifilm.com.sg
Korea Fujifilm Co., Ltd.
Technical support
TEL +82-2-3282-7363 photo@fujifilm.co.kr
Yonsan AS Center (Fujidigital)
Repair service
TEL +82-2-701-1472 1bowl@hanmail.net
Kangnam AS Center (Digitalgallery) Repair service
TEL +82-2-2203-1472 nurijili@hanmail.net
Busan AS Center (Digital-Sewon)
Repair service
TEL +82-51-806-1472 merahan@yahoo.co.kr
Hung Chong Corp.
Technical support & repairs TEL 886-2-6602-8988 dah@mail.hungchong.com.tw
FUJIFILM (Thailand) Ltd.
Technical support
TEL +662-2706000 ext. 751,752
Dusit_Suriyong@fujifilm.co.th yaowarat@fujifilm.co.th
Repair service
TEL +662-2706000 ext.761,762 warin@fujifilm.co.th
International Minh Viet Co., Ltd.
Technical support & repairs TEL +84-8-4135740 ext. 322 diep.phanthithanh@imv.com.vn

Appendix

133

IMPORTANT NOTICE: Read Before Using the Software
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM CORPORATION, PLEASE READ THIS END USER
LICENSE AGREEMENT CAREFULLY. YOU SHOULD USE THE SOFTWARE ON THE CD-ROM ONLY IF YOU CON SENT TO THIS AGREEMENT. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS
AGREEMENT.

End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between FUJIFILM
Corporation (“FUJIFILM”) and you, which sets forth the terms and conditions of the license granted for you to use the software provided by FUJIFILM.
The CD-ROM contains third-party software. In case a separate agreement is provided
by a third party supplier for its software, the provisions of such separate agreement shall
apply to the use of such third party software, prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix” which is provided to you
together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and other related
written materials which are provided to you together with Media.
(d) “Product” means Media (including Software) and Documentation collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine executable
form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any part of Software,
Media or Documentation to any third party without FUJIFILM’s prior written consent. You also shall not sublicense, assign or otherwise transfer all or any part of
the rights granted to you by FUJIFILM under this Agreement without FUJIFILM’s
prior written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation. You also
shall not alter or remove copyright and other proprietary notices that appear on
or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer, decompile, or
disassemble Software.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on or in
Software or Documentation. Nothing contained herein shall be construed, expressly
or implicitly, as transferring or granting any right, license, or title to you other than
those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material and workmanship under normal use for ninety (90) days from the date of your receipt of Media.
Should Media not meet the foregoing warranty, FUJIFILM shall replace such defective
Media with other Media bearing no defect. FUJIFILM’s entire liability and your sole
and exclusive remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT “AS IS”
AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL
MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT,
PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,
MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING
DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF OR
INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be transferred, or
exported to any country or used in any manner in violation of any export control laws
and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM may immediately
terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use Software, unless
earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own responsibility and expense, delete or destroy immediately all Software (including its copies),
Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with laws of Japan.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : Adobe InDesign CS2_J (4.0.5)
Modify Date                     : 2008:08:01 15:19:29+09:00
Create Date                     : 2008:07:29 13:08:47+09:00
Metadata Date                   : 2008:08:01 15:19:29+09:00
Document ID                     : uuid:90fb1947-5be0-4b8f-93c6-97e210e052a5
Instance ID                     : uuid:c68171b2-1bdf-4384-82f8-65c009a0587a
Format                          : application/pdf
Title                           : FINEPIX S2000HD Owner's Manual
Creator                         : FUJIFILM Corporation
Page Count                      : 148
Page Layout                     : TwoPageRight
Author                          : FUJIFILM Corporation
EXIF Metadata provided by EXIF.tools

Navigation menu