Fujikon BN-500 BN-500 FIC BT and ANC Over Ear Headsets User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3591695
Application ID	ZntosbDDxbKC8pDX7rEUjg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.97kB (162132 bits)
Date Submitted	2017-10-03 00:00:00
Date Available	2018-04-01 00:00:00
Creation Date	2017-09-26 14:09:33
Producing Software	PDF-XChange Printer V6 (6.0 build 319) [Windows 10 Enterprise x64 (Build 10586)]
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

BN-500 Bluetooth wireless with Active Noise
Cancellation Headphones
Keys and parts
The headset contains several technological features to improve the experience of the user.
The following section is an overview of the parts:
Before using the earphones, you must fully charge the battery and connect the headset to your
respective Bluetooth device.
HOW TO CHARGE THE HEADPHONE BATTERY
LED will flash in white and a signal tone will sound during low battery level in Bluetooth
mode. To recharge the battery:
1. Open the rubber plug on the USB port;
2. Connect the USB port of your headphones with the USB port of your computer, USB
charger etc. Use a suitable USB charging cable for this (type A plug to a type micro B plug).
The LED will pulse in white during the charging process. The brightness of the LED
indicates the charge status. The brighter the LED, the higher the charge status. Once the
battery is fully charged, the LED will illuminate continuously in white.
3. Take the USB charging cable out of the USB port of the headphones and put the rubber
plug back in place. The LED will go out.
BLUETOOTH PAIRING
Bluetooth mode only works if no cable has been connected. As soon as you connect the
headphones to a USB charger to charge them or operate the headphones via a connector cord,
Bluetooth mode will automatically be deactivated. You can connect compatible devices such
as most smartphones with your headphones via Bluetooth. The audio output of your
smartphone is then emitted via BN-500.
1. Set the sliding switch to position B or C, The headphones are in pairing mode. The LED will
blink in blue.
2. If this does not happen, hold the MFB down for about 2 seconds. Pairing mode has now
been reactivated and the LED will blink in blue.
3. Turn on the Bluetooth function on your external player (e.g. smartphone).
4. Let your smartphone search for Bluetooth devices, and “BN-500” should appear in the
detected devices list.
5. Select “BN-500” from the list. If your external player requires the entry of a PIN code, enter
the PIN code “0000” set by factory default. A signal tone will sound if the headphones and
your Bluetooth device are connected.
6. To terminate the Bluetooth® connection, switch off the Bluetooth function on your
external player (smartphone).
RECONNECT THE HEADPHONES
If your “BN-500” has been previously connected with your external player (smartphone),
enabling the Bluetooth function on your external player (smartphone) is all you have to do to
connect the two devices.
RESETTING THE HEADPHONES
To reset the Bluetooth® pairing settings, move the sliding switch to position B or C. Hold
down the MFB And Vol - simultaneously for approx. 4 seconds. The LED will blink twice in
blue and the Bluetooth pairing settings will have been reset.
HEADPHONES CONTOL WHILE CONNECTED WITH SMARTPHONES
Headphones function
Accept Incoming Call
Reject Incoming Call
End the Current Call
Mute the current call
Hold the current call and accept and
incoming call
Voice dialing
Redial last number
Adjust volume up
Adjust volume down
Play or Pause Music
Go to the next track
Go to the Pervious track
Control List
Press MFB Once
Press and hold the MFB for 2 seconds
Press MFB Once
Press both Vol + & Vol - Once
Press the MFB Once during the incoming call
Press and hold the MFB for 2 seconds when
smart phone is standby
Press both Vol + & Vol - for 3 seconds
Press Vol + button
Press Vol - button
Press the MFB Once
Press & hold the Vol + button for 2 seconds
Press & hold the Vol - button for 2 seconds
ACTIVE NOISE CANCELLATION FUNCTION CONTROL
Moving the sliding switch on your headphones activates the following functions:
Position A: Bluetooth and ANC are disabled.
Position B: Bluetooth is enabled (LED is illuminated in blue).
Position C: Bluetooth and ANC are enabled (LED briefly blinks in blue twice).
If you have connected the headphones via a cable, you can activate the ANC function by
moving the sliding switch to position C.
Safety requirements
Heed all warnings
Keep and follow all instructions.
The operating temperature range in user manual: from 0 degree Celsius to 45 degree Celsius.
DO NOT use this apparatus near water
Clean only with dry cloth
DO NOT disassemble or replace the battery. If you suspect there is something wrong with the battery, please carry the unit to the
CAUTION: RISK OF EXPLOSION IF BATTRY IS REPLACED BY AN UNCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
The battery should not be disposed together with other waste. The battery has to be disposed at an authorized place for recycling of
service center for help.
THE INSTRUCTIONS
electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is
disposed in an environmental friendly and healthy way.
Unplug this apparatus during lightning storms or when unused for long periods of time
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
Only use accessories specified by the manufacturer
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
heat
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
EN requirements
This product is in conformity with RED Directive 2014/53/EU with the reference to the following standards applied:
EN 60950-1:2006+A11:2009+A12:2011+A2:2013
Draft EN 301 489-1 V2.2.0(2017-03)
Draft EN 301 489-17 V3.2.0(2017-03)
EN 55032:2015
EN 55024:2010+A1:2015
ETSI EN300 328 V2.1.1(2016-11)
EN62479:2010
FCC requirements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is comply with Class B
limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may results in
interference to radio or reception.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate
the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Radio Frequency Specification
Maximum RF Output power <7dBm
Radio Frequency Range: 2402MHz to 2480MHz
Manufacturer's name and address
Fujikon Industrial Co. Ltd.
16/F, Tower 1, Grand Central Plaza, 138 Shatin Rural Committee Road, Shatin, N.T., Hong Kong

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Producer                        : PDF-XChange Printer V6 (6.0 build 319) [Windows 10 Enterprise x64 (Build 10586)]
Create Date                     : 2017:09:26 14:09:33+08:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools