Fujitsu Client Computing BT0004 Ubiquitous-warecore module User Manual FUWC x
Fujitsu Limited Ubiquitous-warecore module FUWC x
(Short-Term Confidential) User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2831794 |
| Application ID | ncz0M4uOxx8pXZIqpUW0bQ== |
| Document Description | (Short-Term Confidential) User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 5.17kB (64628 bits) |
| Date Submitted | 2015-12-07 00:00:00 |
| Date Available | 2016-06-05 00:00:00 |
| Creation Date | 2015-10-30 14:45:15 |
| Producing Software | PrimoPDF |
| Document Lastmod | 2015-10-30 14:45:15 |
| Document Title | Microsoft Word - FUWC User Manual.docx |
| Document Creator | PrimoPDF http://www.primopdf.com/ |
| Document Author: | 00484183 |
FUWC User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module; [for FCC] Contains Transmitter Module FCC ID: EJE-BT0004 or Contains FCC ID: EJE-BT0004 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. [for IC] Contains Transmitter Module IC: 337J-BT0004 or Contains IC: 337J-BT0004 The following statements must be described on the user manual of the host device of this module; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other transmitter. (For Mobile Use) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). (For Portable) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio (SAR). [for IC] This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. (For Mobile Use) This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée. (For Portable) This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio (SAR). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS). This radio transmitter 337J-BT0004 identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type: Pattern Gain: -2.0 dBi Antenna type: Monopole Gain: 0.7 dBi Le présent émetteur radio 337J-BT0004 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci ‑ dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Type d’antenne: Pattern Gain: -2.0 dBi Type d’antenne: Monopole Gain: 0.7 dBi
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : PrimoPDF Create Date : 2015:10:30 14:45:15 Modify Date : 2015:10:30 14:45:15 Title : Microsoft Word - FUWC User Manual.docx Creator : PrimoPDF http://www.primopdf.com/ Author : 00484183EXIF Metadata provided by EXIF.tools