Fujitsu Client Computing EM7455D1 LTE Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3235832
Application ID	4FZyPXDoduXgS68GaOUCVg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	463.77kB (5797064 bits)
Date Submitted	2016-12-21 00:00:00
Date Available	2017-06-25 00:00:00
Creation Date	2016-02-26 11:18:50
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2016-12-19 18:32:07
Document Title	Print Preview - C:\DOCUME~1\miclem\LOCALS~1\Temp\.aptcache\ae2oohow/tf2oopyn
Document Creator	PScript5.dll Version 5.2.2
Document Author:	miclem

Operating Manual
FUJITSU LIFEBOOK T937
System
Contact address in North America
FUJITSU AMERICA INC.
1250 East Arques Avenue, Sunnyvale,
CA 94085-3470, U.S.A.
Telephone: 800 831 3183 or 408 746 6000
"http://solutions.us.fujitsu.com"
"http://solutions.us.fujitsu.com/contact"
Have a question? Email us at: "AskFujitsu@us.fujitsu.com"
Copyright
© 2017 Fujitsu America, Inc. All rights reserved
B5FK-6471-01ENZ0-01
FUJITSU LIFEBOOK T937
Operating Manual
Declarations of conformity
Fujitsu Contact Information
Ports and controls
10
Important notes
13
First-time setup of your device
18
Working with the notebook
22
Security functions
62
Connecting external devices
70
Removing and installing components
during servicing
75
Settings in BIOS Setup Utility
76
Troubleshooting and tips
79
Technical data
87
Manufacturer’s notes
92
Declarations of conformity
95
FCC and IC Regulatory Information
96
Appendix
100
Index
118
Copyright and Trademark Information
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness
of this document; however, as ongoing development efforts are continually improving the
capabilities of our products, we cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
OmniPass is a trademark of Softex, Inc.
Roxio is a trademark of Roxio, a division of Sonic Solutions.
YouCam is a trademark of CyberLink Corp.
Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
The DVD player found in some models of the LIFEBOOK notebook incorporates copyright
protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights users. Use
of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
All other trademarks specified here are the property of their respective owners.
Contents
Contents
Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traveling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Further information on cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
14
14
14
15
15
16
16
17
17
First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choose a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the device for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Bonus Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
19
19
20
21
Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the notebook on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programming the ON/OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Different ways to use your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
From notebook to Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select display orientation (portrait or landscape format) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
From Tablet PC to notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching off the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ambient light sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the device as a Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using your fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the device as a notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clickpad and Clickpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Virtual number keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
22
24
25
25
26
26
29
29
30
31
31
32
32
32
32
33
36
36
37
40
40
41
43
44
45
Fujitsu
Contents
Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the energy saving functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker and microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional wireless LAN / Bluetooth / 4G wireless components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Further information on WLAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access via 4G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes.............................................................................
Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your port replicator (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ports on the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the notebook to the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the notebook via the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching off notebook via port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disconnecting the notebook from the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
45
49
50
50
50
51
51
52
52
53
53
53
54
54
54
55
56
57
57
58
59
60
60
61
Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief overview of the security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the fingerprint sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting BIOS Setup Utility (supervisor password and user password) . . . . . . . . . . . . . . . . .
Password protection for booting the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting the Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the security function of the tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning the supervisor password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning the user password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering passwords via the tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trusted Platform Module - TPM (device dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
63
64
64
65
65
66
67
67
67
68
68
68
68
69
69
69
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an external monitor to the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB port with charging function (Anytime USB charge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Headphones port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
70
71
72
73
73
74
Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
Fujitsu
Contents
Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BIOS Setup Utility operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . .
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . .
Load Setup Defaults – load default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . .
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . .
Save changes and power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
76
77
78
78
78
78
78
78
78
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovering your Factory Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery indicator does not illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When certain characters are entered on the keyboard, only numerals are written . . . . . . . . . . . . .
The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The LCD screen of the notebook is difficult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The cursor does not correctly follow the stylus movements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stylus input not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The notebook does not start after switching it on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The wireless connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The battery discharges too quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card reader is not recognized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card PIN forgotten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User and/or supervisor SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acoustic warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
79
79
80
80
80
80
81
81
81
82
82
82
83
83
83
84
84
84
84
85
85
85
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WLAN specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Port replicator (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC adapter for use of the notebook and port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
87
87
88
90
90
91
Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recycling your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DOC (Industry CANADA) Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UL Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
92
92
92
92
93
94
Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
95
FCC and IC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Regulatory Notes and Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN, Health and Authorization for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
96
96
96
Fujitsu
Contents
Regulatory Information/Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Federal Communications Commission and Industry Canada statement: . . . . . . . . . . . . . . . . . .
Déclaration d’Industrie Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Radio Frequency Exposure statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences . . . . . . . . . . .
Export restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restrictions concernant l’exportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avis pour le Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
96
97
97
97
98
98
98
99
99
99
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN Devices Covered by this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the WLAN Using Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Image Backup and Recovery Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows® 7 Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Backup of Bootable Disc and Recovery Image for Windows 7 . . . . . . . . . . . . . . . .
Creating a backup of the System-Specific Software Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WINDOWS 7 RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS STILL
ACCESSIBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS NOT BOOTABLE FOR
WINDOWS 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or
non-bootable hard drive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Software after the Recovery Image is Restored . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows® 10 Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a recovery drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovery options in Windows 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloading driver updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
100
100
100
101
103
104
104
104
105
107
108
108
108
109
109
111
112
113
114
114
114
117
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Fujitsu
Declarations of conformity
Declarations of conformity
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name:
Address:
Telephone:
Declares that product:
Fujitsu America, Inc.
1250 E. Arques Avenue
Sunnyvale, CA 94085
(408) 746-6000
Base Model Configuration: LIFEBOOK T937 Notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the
following two conditions: (1) This device may not cause harmful interference. (2) This
device must accept any interference received, including interference that may cause
undesired operation.
Fujitsu
Fujitsu Contact Information
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
•
•
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
•
•
•
•
•
•
•
Product name
Product configuration number
Product serial number
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
Fujitsu Shopping Online
Please go to "http://www.shopfujitsu.com/store/ ".
Maintaining Latest Configuration
To ensure that you always have the most current driver updates related to your system, you should
occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is
available from the Fujitsu Support site. FSDM will allow you to view a list of the most current
drivers, utilities and applications to determine whether you have the latest versions. If you have a
Windows 7 or Windows 10 operating system, you will need to go to the Support Site to download
the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".
Limited Warranty
Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check
the Limited Warranty Terms and Conditions Booklet that came with your notebook.
Fujitsu
Fujitsu Contact Information
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
this warning will endanger your life, will damage the device or lead to loss
of data. The warranty will be invalidated if the device becomes defective
through failure to observe these warnings.
Indicates important information which is required to use the device properly.
►
indicates an activity that must be performed
indicates a result
This style
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
indicates
"This style"
• terms and texts used in a software interface, e.g.: Click on Save.
• names of programs or files, e.g. Windows or setup.exe.
indicates
This style
This style
•
•
Key
This style
Fujitsu
Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more
information, go to "http://solutions.us.fujitsu.com/"
• names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
indicates a key on the keyboard, e.g: F10
indicates terms and text that are emphasized or highlighted, e.g.: Do not
switch off the device
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives an
overview of the indicators and connections of the device. Please familiarize yourself
with these items before you start to work with the device.
Notebook open
10
Microphone
Webcam
Webcam LED
Windows button
Ambient light sensor
Clickpad
Clickpad buttons
Fingerprint sensor
Fujitsu
Ports and controls
Left-hand side
4 = USB port 3.0 with charging function
(Anytime USB charge)
5 = Headphone jack
6 = SmartCard reader
1 = DC jack (DC IN)
2 = Lock slot
3 = Exhaust grid
Right-hand side
1 = SD card slot
2 = USB3.0 port
3 = USB-C port
Fujitsu
4 = HDMI port
5 = SIM card slot
6 = VGA port
11
Ports and controls
Bottom
1 = Speaker
2 = Battery compartment with SIM card
slot under the battery
12
3 = Battery Lock slider switch
4 = Port for port replicator
Fujitsu
Important notes
Important notes
Notes
Importantnotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Safety instructions
Information,
Safetyinformation
Please observe the following safety information.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data", Page 87
chapter and the "First-time setup of your device", Page 18 chapter before preparing
your notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the notebook", Page 17.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installing
components during servicing", Page 75.
When handling this device, you will come into contact with lead, a chemical which in
California is held to be a possible cause of birth defects and other damage to fertility.
Wash your hands after using the device.
This notebook complies with the relevant safety regulations for data processing equipment.
If you have any questions about setting up your notebook in the intended environment,
please contact your sales outlet or our Hotline/Service Desk.
Fujitsu
13
Important notes
Additional safety notes for devices with
radio components
Wireless LAN
Radiocomponents
Bluetooth,Safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS, 4G) is incorporated in your notebook,
you must be sure to observe the following safety notes when using your notebook:
•
•
•
Switch off the radio components when you are in an aircraft or driving in a car.
Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
Switch off the radio components, when you let the device get near flammable gases
or into hazardous environments (e.g. gas station, paintshops), as the transmitted
radio waves can cause an explosion or a fire.
For further information on how to switch the radio components on and off, refer
to chapter "Switching the wireless components on and off", Page 53.
Energy saving
Power saving
Energy
Notes
Switch the notebook off when it is not in use. Switch off any connected external devices when
they are not in use. If you use the energy saving functions, the notebook uses less power. You
will then be able to work for longer before having to recharge the battery.
The energy efficiency is increased and environmental pollution is reduced.
You save money and help protect the environment.
Energy saving under Windows
► Make use of the available energy saving functions as described in chapter
"Using the energy saving functions", Page 49.
14
Fujitsu
Important notes
Traveling with your notebook
Mobile operation
Notebook
Transport
Notes
Please observe the points listed below when traveling with your notebook.
Before you travel
► Back up important data stored on your hard disk.
► Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorized third parties to receive data.
Traveling,notebook
Notebook
Information on activating data encryption is provided in the documentation
for your radio component.
► If you wish to use your notebook during a flight, check with the flight attendants if its use is safe.
When traveling in other countries
► If you are traveling abroad, check that the AC adapter can be operated with the local AC
voltage. If this is not the case, obtain the appropriate AC adapter for your notebook.
Do not use any other converter!
► Check whether the local AC voltage and the AC cable are compatible. If this is not
the case, buy an AC cable that suits the local conditions.
► Enquire with the corresponding government office of the country you will be traveling to,
whether you may use your notebook with its integrated radio component there.
► Take the necessary travel adapters with you when traveling abroad. Check the following
table to see which travel adapters you will need, or ask your travel organizer.
Power connection
Travel destination
United States, Canada, Mexico, parts of Latin
America, Japan, Korea, Philippines, Taiwan
Russia and the Commonwealth of Independent
States (CIS), much of Europe, parts of Latin
America, the Middle East, parts of Africa, Hong
Kong, India, much of south-east Asia
United Kingdom, Ireland, Malaya, Singapore,
parts of Africa
China, Australia, New Zealand
Fujitsu
15
Important notes
Transporting the notebook
Protect the notebook against severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
•
•
•
►
►
►
►
Do not transport the notebook while it is switched on.
Carry your notebook with you while traveling. Do not check it in as baggage.
Never put your notebook through a metal detector. Have it hand-inspected by
security personnel. You can, however, put your notebook through a correctly set
X-ray machine. To avoid problems, place the notebook as close as possible
to the entrance of the machine and remove it as soon as possible or have it
hand-inspected by security personnel. Security officials may require you to switch
your notebook on. So make sure you have a charged battery on hand for this.
Switch the notebook off.
Unplug the AC plug of the AC adapter and all external devices from the power outlets.
Disconnect the AC adapter cable and the data cables for all external devices.
To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Storing the notebook
•
•
•
If storing your notebook for a month or longer, turn it off, fully charge the battery, then
remove and store all the Lithium Polymer batteries in a suitable location.
Store your notebook in a cool dry location. Temperatures should remain
between 13 ºF / -25 ºC and 140 ºF / 60 ºC.
Store your notebook and batteries separately. If you store your notebook with a
battery installed, the battery will discharge, and battery life will be reduced. In
addition, a faulty battery might damage your notebook.
•
•
•
16
Always power off the notebook before transporting and/or packaging it.
After shutting down the notebook, wait until the status LED panel indicates
the power-off condition (i.e., no lights are illuminated).
It is possible that the notebook may not automatically go to power-off or sleep mode
when you close the lid. This situation may occur due to pre-operating system boot
password security settings or some other application running on the notebook.
Attempting to transport the notebook while power is on may damage
the notebook due to shock or overheating.
Fujitsu
Important notes
Cleaning the notebook
•
•
•
•
Use of incorrect cleaners can result in optical impairment of the LCD and / or
damage to the notebook. Always refer to the cleaner manufacturer’s guidelines and
material safety data sheets for proper handling and use of the products.
Never use ammonia, acidic, or alkaline cleaners or organic chemicals
such as paint thinner, acetone or kerosene. It may damage surface
finishes and the coating of the LCD screen.
Never use compressed air for cleaning the notebook.
If your notebook has a Smart Card slot, be very careful to avoid any liquid
entering the slot as this can damage the notebook.
Further information on cleaning the notebook
The notebook does not float.
If the notebook is exposed to water or other liquids with its connections open, liquid
can penetrate the notebook and cause a malfunction. Do not continue to use the
notebook. Switch it off and contact our hotline / our service desk (see enclosed list of
service desks or visit our website at: "http://www.fujitsu.com/us/support/").
Fujitsu
17
First-time setup of your device
First-time setup of your device
Gettingstarted
First-timesetup
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapter, see "Connecting the AC adapter", Page 19. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. The battery
must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
► Check your device for any visible damage which may have occurred during transportation.
Transport
Packaging
You may need to reuse the packaging in the future, for example if
you need to ship your device.
18
Fujitsu
First-time setup of your device
Choose a location
ACadapter
Setup
Choosealocation
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
•
Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
The underside of the device heats up during normal operation. Prolonged contact
with the skin can become unpleasant or even result in burns.
Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
Keep other objects at least 100 mm / 3.97 inches away from the device
and its AC adapter to ensure adequate ventilation.
Never cover the ventilation openings of the device.
Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
•
•
•
•
•
•
Connecting the AC adapter
ACadapter
Makingreadytouse
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which you intend to use it.
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu
19
First-time setup of your device
Switching on the device for the first time
Switchingon for thefirsttime
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
► Slide the ON/OFF switch (1) to the right to switch on the notebook.
 The ON/OFF switch returns automatically to its original position.
► During the installation process, follow the on-screen instructions.
You can find information and help on the Windows operating system functions
on the Internet at "http://windows.microsoft.com".
20
Fujitsu
First-time setup of your device
Installing Bonus Apps
BonusApps
After you have started your system the first time, you will see a Bonus Apps icon on your desktop.
► Click on the icon to see which additional applications are available for you to install.
 Applications that are already installed appear in grey, those that are
available for installation appear in blue.
► Select the applications you wish to install by selecting the checkbox adjacent to your selection.
or
► Click Select All if you would like to install all available applications.
► To confirm your selection, click Install.
Note that in some cases (depending upon which application was selected for
installation) after installation completes, the system will prompt you to reboot.
There are also cases in which if multiple applications are selected to install
but one of them needs a reboot, the system will reboot and continue
installing the rest of the selected applications.
Fujitsu
21
Working with the notebook
Working with the notebook
Notebook
Operation,notebook
This chapter describes the basics for operating your notebook. Please refer to
"Connecting external devices", Page 70 for instructions on how to connect external
devices such as a mouse and a printer to the notebook.
Please refer to the notes in the chapter "Important notes", Page 13.
Status indicators
Symbols
Statusindicators
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions, etc.
22
Fujitsu
Working with the notebook
Status indicator
Description
Num Lock indicator
The indicator is illuminated: The Num key has been pressed. The virtual
number keys have been activated. You can output the characters indicated
on the upper right of the keys.
Caps Lock indicator
The indicator is illuminated: The Caps Lock key has been pressed. All
characters are displayed in upper case. In the case of overlay keys, the
character printed on the upper left of the key will appear when that key is
pressed.
Scroll Lock indicator
The indicator is illuminated: The key combination FN + Rol has been
pressed. The effect that this key has varies between applications.
Power-on indicator
• The indicator is illuminated: The notebook is switched on.
• The indicator flashes: The notebook is in sleep mode (Save-to-RAM).
• The indicator is not lit up: The notebook is switched off or the notebook is
in Save-to-Disk mode.
Battery charging indicator/AC connection
The charging state of the battery is shown by the rechargeable battery
indicator.
With AC adapter connected:
•
•
•
The indicator lights up white: The battery is fully charged.
The indicator light is orange: The battery is being charged.
The indicator is flashing orange: The AC adapter is connected but
the battery cannot be charged as the battery is too hot or too cold for
charging. The charging process is continued as soon as the battery has
reached a permissible temperature again.
• Indicator is off: The system is operating under battery power and the AC
adapter is not connected.
Battery indicator
The battery indicator shows the battery charge of the two installed batteries.
•
The indicator lights up white: The battery is between 51% and 100%
charged.
• The indicator light is orange: The battery is between 13% and 50%
charged.
• The indicator lights up red: The battery is between 0% and 12% charged.
• The indicator is flashing orange: The battery state of charge is being
checked (for four seconds after battery installation).
• The indicator is flashing red: The battery is faulty.
• The indicator is not lit up: There is no battery installed.
Drive indicator
The indicator is illuminated: The hard disk drive is being accessed.
Radio components indicator
• The indicator is illuminated: The radio components are switched on.
• Indicator is off: The radio components are switched off.
Fujitsu
23
Working with the notebook
Opening the notebook
► Fold the LCD screen upwards.
24
Fujitsu
Working with the notebook
Switching the notebook on
Notebook:switching on
Power-onindicator
► Slide the ON/OFF switch (1) to the right to switch on the notebook.
 The ON/OFF switch returns automatically to its original position.
The ON/OFF switch (1) is lit as long as the system is switched on.
Programming the ON/OFF switch
You can program the ON/OFF switch:
Operating system
Windows 7
Windows 10
Menu
Start - (Settings) - Control Panel - System and
Security - Power Options
Control Panel - Hardware and Sound - Energy
Options
If you have assigned a password, you must enter this when requested to
do so in order to start the operating system. Detailed information can be
found in the chapter "Security functions", Page 62.
Fujitsu
25
Working with the notebook
Different ways to use your notebook
During your daily work, you can use your notebook as a Tablet PC or as a notebook, just as you wish.
Please note that the monitor cannot be turned completely on its own axis! Stop
turning the monitor as soon as you feel resistance. No guarantee services can
be offered for damage caused due to incorrect turning.
From notebook to Tablet PC
► Raise the LCD screen into a vertical position.
26
Fujitsu
Working with the notebook
► Hold the screen as low as possible on both sides. Turn the screen to the left
or right in the direction of the arrow. At first you will feel some slight resistance,
then the screen will turn easily and without friction.
► Turn the screen further until it has turned 180° and the hinge latches in.
Fujitsu
27
Working with the notebook
► Now fold the screen down until the back of the screen is almost flat on top of the keyboard.
 The screen is now secured in the tablet position.
28
Fujitsu
Working with the notebook
Select display orientation (portrait or landscape format)
Displayorientation
Portraitformat
Landscapeformat
You can choose to use either portrait or landscape format for the display.
If you have a device with installed wireless WAN module, do not operate WWAN with
the antenna folded out when holding the device horizontally with the webcam pointing
downwards (in the tablet position in landscape format (rotated) (secondary landscape)).
Operating the device in that position can result in damage to the antenna.
Windows 7
You can change these settings in the Fujitsu menu or under Start - (Settings -)
Control Panel - Hardware and Sound - Display - Settings.
Windows 10
You can change these settings under Control Panel - Hardware and Sound
- Windows Mobility Center / Rotate screen.
In the Fujitsu Tablet Controls settings, profiles are saved for operation
with different screen orientations. These profiles have preset standard
configurations that can be modified as desired.
These settings do not just affect the monitor settings on the Tablet PC,
but also on external monitors that are connected.
From Tablet PC to notebook
► Raise the LCD screen into a vertical position.
Fujitsu
29
Working with the notebook
Please note that the monitor cannot be turned completely on its own axis! Stop
turning the monitor as soon as you feel resistance. No guarantee services can
be offered for damage caused due to incorrect turning.
► Hold the screen on both sides as far down as possible and then turn the
screen. It will turn easily and without resistance.
► Turn or move the screen further until it has turned 180° and the hinge latches in.
Switching off the notebook
Notebook
► Close all applications and then shut down your operating system (please
refer to the "Operating system manual").
► Slide the power ON/OFF button towards the right.
 The power ON/OFF button returns automatically to its original position.
30
Fujitsu
Working with the notebook
Closing the notebook
► Fold the LCD screen onto the bottom part of the notebook so that it locks into place.
Handwriting recognition
For detailed information on handwriting recognition, see the documentation for your operating system.
At present, handwriting recognition under Windows 7 or Window 10 supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
Under Windows 10 you can set the required language under Control Panel –
Time, Language and Region – Language.
Fujitsu
31
Working with the notebook
LCD screen
Notes
LCDscreen
Background lighting
LCD screens are operated with background lighting. The luminosity of the background
lighting can decrease during the period of use of the notebook. However, you can
set the brightness of your monitor individually.
Synchronizing the display on the LCD screen and an external monitor
For more information, please refer to Chapter "Key combinations", Page 41
under "Switching between display outputs".
Ambient light sensor
If your notebook was shipped with a Windows operating system, the screen brightness is
regulated by the ambient light sensor and is dependent on the particular light conditions.
This results in optimum readability and longer battery life at the same time.
Using the device as a Tablet PC
You can execute commands as follows:
•
•
using the stylus (supplied with your device).
using your finger
Using your fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Alternatively, everything which you can select or activate using your finger
tip can also be selected or activated using the stylus.
Calibrating the Dual Digitizer for finger-based operation of the device
Please see chapter "Calibrating the stylus", Page 34 for instructions on how
to calibrate your device to use Dual Digitizer Technology.
Please note: There are separate calibration programs available for calibrating
the stylus and for calibrating finger-based operation. Do not use the calibration
tool for the stylus to calibrate finger-based operation.
32
Fujitsu
Working with the notebook
Using the stylus
Pen
1 = stylus tip
2 = stylus button (right mouse button)
3 = eyelet for stylus tether
You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to
navigate through the programs. Programs that support handwriting recognition also allow you to
write directly on the screen with the stylus. You can also use the stylus as a drawing tool.
The Tablet PC is supplied with a stylus tether which you can attach to the
eyelets on the stylus and on the Tablet PC.
Use only the stylus that was provided with your Tablet PC. Do not use any other pointed
object as a substitute, that was not specially designed for your Tablet PC. Replace
the stylus tip if it is worn. The warranty does not cover a scratched screen.
While writing, take care that you do not scratch the surface of the
display (e.g. with a wristwatch or bracelet).
To prevent the stylus from getting stuck in its slot, always make sure
that you insert the stylus correctly into its slot (flat part of the stylus
points towards the bottom of the Tablet PC).
The stylus of the Tablet PC is an electronic instrument that can be damaged
if used improperly. Handle the stylus with care.
Our recommendations for proper handling of the stylus are as follows:
Do not gesture with the stylus.
Do not use the stylus as a pointer.
Do not use the stylus on surfaces other than the screen of the Tablet PC.
Do not try to turn the grip of the stylus. The grip is used to put the
stylus into its slot or to take it out of its slot.
• Never store the stylus with its weight on the tip (e.g. with the tip pointing down in a
pen container). If the stylus is stored with the tip pointing down, this may have an
adverse effect on the stylus mechanism (particularly under high temperatures). In
this case the stylus tip may react as though it is constantly being pressed down. To
avoid damage, the stylus should be stored in the slot when not in use.
The stylus can be influenced by electromagnetic fields (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the stylus down firmly.
•
•
•
•
Fujitsu
33
Working with the notebook
The screen responds to entries made with the tip of the finger or the stylus when the
tip of the finger or the stylus directly touches the screen.
You can use the stylus to perform almost all functions for which you would otherwise use a mouse.
Delete functions are not supported by the stylus.
Action
Mouse
Selecting menu
Click with the left mouse button.
items
Starting programs Double-click with the left mouse
button.
Moving an object Drag with the left mouse button
or window
pressed.
Opening a context Click with the right mouse button.
menu
Moving the cursor Move the mouse
Stylus
Tap on the menu entry with the tip of
the stylus.
Tap on the program symbol twice in
rapid succession using the stylus tip.
Place the stylus tip directly on the
object or window. Keep the stylus tip
held against the screen. Drag the
desired object or window.
Tap on the desired element with the
stylus and keep the stylus pressed
against the screen.
Place the tip of the stylus directly on
the screen.
Adjusting the stylus
Operating system
Windows 7
Windows 10
Menu
Under Hardware and Sound - Pen and Input Devices, you can make various
settings for the stylus in the control panel (assignment and function of
the stylus button).
Under System Control - Hardware and Sound - Pen and Touch you can make
various settings for the stylus (assignment and function of the stylus
button).
Calibrating the stylus
Before first use with the stylus, you must calibrate your Tablet PC via the operating
system, so that it recognizes the stylus as accurately as possible.
You should also always repeat the calibration if the coordination between the
stylus and the cursor movement deteriorates.
Operating system
Windows 7 / Windows
10
34
Menu
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Fujitsu
Working with the notebook
Securing a stylus tether
You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it.
► Secure the end of the stylus tether with the smaller loop to your stylus.
► Secure the end of the stylus tether with the larger loop to your notebook.
Fujitsu
35
Working with the notebook
Using the device as a notebook
Clickpad and Clickpad buttons
Keep the Clickpad clean. Protect it from dirt, liquids, and grease.
Clickpad
Do not use the Clickpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the Clickpad or the Clickpad buttons.
1 = Clickpad
2 = Clickpad buttons
The Clickpad enables you to move the mouse pointer on the screen.
The Clickpad buttons allow the selection and execution of commands. They
correspond to the buttons on a conventional mouse.
You can also deactivate the Clickpad via a keyboard shortcut, so that you cannot move
the pointer on the screen unintentionally (see chapter "Key combinations", Page 41).
Moving the pointer
► Move your finger on the Clickpad.
 The pointer will move.
Clickpad
Selecting an item
► Move the pointer to the item you wish to select.
► Tap the Clickpad once or press the left button once.
 The item is selected.
Clickpad
Executing commands
► Move the pointer to the field you wish to select.
► Tap the Clickpad twice or press the left button twice.
 The command is executed.
Clickpad
36
Fujitsu
Working with the notebook
Dragging items
► Select the desired item.
► Press and hold the left button and drag the item to the desired position
with the finger on the Clickpad.
 The item will be moved.
Clickpad
Switching the Clickpad on and off
You can switch the Clickpad on and off using a key combination,
see "Key combinations", Page 41.
Keyboard
Numerickeypad
Keyboard
Number
keys
keypad
The keyboard of your notebook is subject to continuous wear through normal
use. The key markings are especially prone to wear. The key markings are
liable to wear away over the life of the notebook.
The keyboard has been designed to provide all the functions of an enhanced keyboard.
Some enhanced keyboard functions are mapped with key combinations.
The following description of the keys applies to the Windows operating system. Additional functions
supported by the keys are described in the relevant manuals supplied with your application programs.
The following illustration shows how to access the different characters on keys with overlaid
functions. The example applies when the Caps Lock key has not been activated.
The illustration may differ from your device.
Fujitsu
Num
Lock
Fn
37
Working with the notebook
Key
Description
Backspace key
The Backspace key deletes the character to the left of the cursor.
Backspace
Backspacekey
Tab key
The Tab key moves the cursor to the next tab stop.
Tabkey
Enter key (return)
The Enter key terminates a command line. The command you have entered
is executed when you press this key.
Linefeed
Enter
Return
Enterkey
Alt
Alt key
When pressing the Alt key, special functions are activated when it is
pressed in combination with other keys.
Ctrl
Ctrl key
When pressing the Ctrl key, special functions are activated when it is
pressed in combination with other keys.
Num
Lock
Num Lock key
When pressing the Num Lock key, the virtual numeric keypad is activated.
Those characters are issued, which are located at the top right corner of
the respective keys.
Pause
Pause | Break key
When pressing the Pause | Break key, the screen display in BIOS is paused
until another key is pressed (e.g. at system startup).
Break
Prt Scr
Sys Rq
Scroll
Lock
Insert
38
Prt Scrn | Sys Rq key
When pressing the Prt Scrn | Sys Rq key, a screenshot of the current
screen image is created and stored in the clipboard.
Scroll Lock key
When pressing the Scroll Lock key, special functions are activated, which
differ from application to application.
Insert key
When pressing the Scroll Insert key, you change between two input modes:
1. Typeover mode: when typing, you overwrite the character at the current
cursor position.
2. Insert mode: while typing, another character at the current cursor
position is inserted, all characters right of the cursor will be shifted by
one position.
Fujitsu
Working with the notebook
Key
Delete
Caps Lock
Description
Delete key
When pressing the Scroll Delete key, the character before the / right of
the cursor will be deleted.
Caps Lock key
The Caps Lock key activates the Caps Lock mode, and the corresponding
icon is displayed in the Windows information area. In Caps Lock mode, all
of the characters you type appear in upper case. In the case of overlay
keys, the character printed on the upper left of the key will appear when
that key is pressed. To cancel the Caps Lock function, simply press the
Caps Lock key again.
CapsLock
CapsLockkey
Shift
Shift key
The Shift key causes uppercase characters to appear. In the case of overlay
keys, the character printed on the upper left of the key will appear when
that key is pressed.
Shift
Shiftkey
Fn key
The Fn key enables the special functions indicated on overlay keys (see
"Key combinations", Page 41).
Fnkey
Cursor keys
The cursor keys move the cursor in the direction of the arrow, i.e. up, down,
left, or right.
Cursor control
keys
Windows key
The Windows key switches between the start screen and the last used
application.
Windowskey
Menu key
The Menu key opens the menu for the active application.
Fujitsu
39
Working with the notebook
Virtual number keys
Numeric
Num
Virtualnumberkeys
Lock
keypad
Virtual number keys are provided so that the keys of a number keypad can be used for certain
applications. The virtual number keys are recognizable on the keyboard by the numbers and
symbols printed in the upper right corner of each key. If you have switched on the virtual number
keys, you can output the characters shown on the upper right of the keys.
The key assignment shown below may be different from the
keyboard layout of your device.
1 = Character valid when the Num
key is not active
2 = Character valid when the Num
key is active
Further information about the status indicators can be found in chapter "Status indicators", Page 22.
Country and keyboard settings
► Make the country and keyboard settings as described in the documentation for your operating
system.
40
Fujitsu
Working with the notebook
Key combinations
Keycombinations
The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.
Other key combinations are described in the relevant manuals supplied
with your application programs.
Key combinations are entered as follows:
► Press the first key in the combination and keep it pressed.
► While holding the first key down, press the other key or keys in the combination.
Combination
Description
Activate/deactivate keyboard backlight
On backlit keyboards, this key combination activates or deactivates
the backlight.
Deactivate
Activate
Fn+F2
Sequence:
•
•
•
•
Background lighting off
Low brightness
High brightness
Background lighting off
Switching the speakers on and off
This key combination switches your notebook’s speakers off and
on.
Switchoff
Switchon
Fn+F3
Activate/deactivate the clickpad and clickpad buttons
This key combination switches the Clickpad and the Clickpad
buttons on or off.
Clickpadbuttons
Clickpad
Fn+F4
Wireless components
This key combination switches the wireless components off or on.
Wirelesscomponents
Fn+F5
Decreasing the screen brightness
This key combination decreases the brightness of the screen.
Screenbrightness
LCDscreen
Fn+F6
Increasing the screen brightness
This key combination increases the brightness of the screen.
Screenbrightness
Fn+F7
Decrease the volume
This key combination reduces the volume of the internal speakers.
Volume
Fn+F8
Fujitsu
41
Working with the notebook
Combination
Description
Increase volume
This key combination increases the volume of the internal
speakers.
Volume
Fn+F9
Switching between screen outputs
Use this key combination to select which screen(s) is/are used for
display if an external monitor is connected.
The screen output is possible in the following sequence:
•
•
•
only on the notebook’s LCD screen
on the LCD screen of the notebook and the external monitor
at the same time
only on the external monitor
This setting is useful if you would like a high resolution and a
high refresh rate on an external monitor.
Switchingbetweenscreenoutputs
Fn+F10
Switch between open applications
Use this key combination to switch between several open
applications.
Alt+Tab
Ctrl
Alt
Del
Windows security/Task-Manager
This key combination opens the Windows Security/Task Manager
window.
Ctrl+Alt+Del
Shift
Back tab
This key combination moves the cursor back to the previous tab
stop.
Backtab
Shift+Tab
Key combinations using the Windows keys are detailed in the manual
for your operating system.
42
Fujitsu
Working with the notebook
Tablet buttons
Your notebook is equipped with a Windows button and two volume buttons.
Button
Function
Windows button
This button has the same function as the Windows key of a keyboard.
If the button is pressed in combination with the ON/OFF button, the function is the
same as for the Ctrl + Alt + Del .
Volume Up button
This button increases the volume of the internal speakers.
Volume Down button
This button decreases the volume of the internal speakers.
Fujitsu
43
Working with the notebook
Webcam
Webcam
Depending on the software used, you can use your webcam to take pictures,
record video clips or take part in web chats.
The webcam has its own status indicator. The indicator lights up when the webcam is active.
•
•
•
•
The picture quality depends on the lighting conditions and the software being used.
You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
When using the webcam, the notebook base must not wobble.
The webcam automatically adjusts itself to the current light level. For this reason
the LCD display may flicker while the light level is adjusted.
Further information on use of the webcam and additional settings for your webcam
can be found in the help function of the program using the webcam.
44
Fujitsu
Working with the notebook
Rechargeable battery
Rechargeablebattery
Servicelife,battery
Battery
During mobile use, the notebook runs on its built-in battery. You can increase the
service life of the battery by caring for the battery properly. The average battery
service life is around 800 charge/discharge cycles.
You can extend the battery service life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
Battery
The notebook battery can only be charged if the ambient temperature is between
5°C / 41°F and a maximum of 35°C / 95°F.
You can charge the battery by connecting the notebook to the AC adapter
(see "Connecting the AC adapter", Page 19).
If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter
within five minutes of the warning alarm described above, your notebook will automatically switch off.
Monitoring the battery state of charge
battery charge meter
Battery
Windows also has a "Battery charge meter" in the taskbar for monitoring the
battery capacity. When you place the mouse pointer on the battery symbol, the
system displays the state of charge of the battery.
Battery storage
Chargecapacity,battery
Self-discharge,battery
Battery
The battery should be stored in a dry environment at a temperature between 0°C / 32°F and
30°C / 86°F. The lower the storage temperature, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (more than two months),
the battery charge level should be approx. 30%. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimum capacity of the battery, you should allow
the battery to fully discharge and then recharge it.
If you will not use batteries for long periods, remove them from the
notebook. Never store batteries in the device.
Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. This
can make it impossible to recharge.
Fujitsu
45
Working with the notebook
Removing a battery
Please observe the safety information in chapter "Important notes", Page 13.
Remove the power plug from the power outlet!
► Switch the device off.
The device must not be in energy saving mode.
► Close the LCD screen.
► Remove all the cables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
46
Fujitsu
Working with the notebook
►
►
►
►
Slide the Battery Lock slider switch in the direction of the arrow (1) and hold it in place.
Slide the Battery Lock slider switch in direction of the arrow (2).
Remove the battery compartment cover (3).
Remove the battery from the battery compartment (4).
Fujitsu
47
Working with the notebook
Installing a battery
► Insert the battery in the battery compartment (1).
► Close the battery compartment cover (2).
► Slide the Battery Lock slider switch in direction of the arrow (3).
 The battery is secured.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
48
Fujitsu
Working with the notebook
Using the energy saving functions
Battery
Energy
The notebook uses less power when the available energy-saving functions are used. You will
then be able to work longer when using the battery before having to recharge it.
The energy efficiency is increased and environmental pollution is reduced.
By choosing the best power options, you can make significant savings and
at the same time help protect the environment.
When you fold down and close the LCD screen, depending on the setting in Windows,
the notebook automatically enters a power saving mode.
The recommended settings for the Windows energy saving functions are predefined as "Fujitsu
Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.
► Set the energy saving functions in your Control Panel.
If you need further information about an option, you can get help with most
settings by pressing F1 to open the Microsoft Help.
When the notebook is in energy saving mode, the following must be remembered:
During energy saving mode, open data is held in main memory or
in a swap file on the hard disk.
Never switch the notebook off while it is in an energy saving mode. If the built-in battery
is nearly flat, close all open files and do not go into energy saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard
or by switching on the notebook.
► Close all opened programs and completely shut down the notebook.
Fujitsu
49
Working with the notebook
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader.
Follow the manufacturer’s instructions when handling the memory cards.
Memory card
Supported formats
Your notebook supports the following formats:
•
•
•
Secure Digital (SDTM Card)
SDHC
SDXC
Inserting the memory card
► Carefully slide the memory card into the
slot. The label should be facing upward. Do
not apply excessive force, as otherwise the
delicate contact surfaces could be damaged.
 Depending on the particular type
used, the memory card may protrude
slightly from the slot.
Memory card
50
Fujitsu
Working with the notebook
Removing the memory card
Memorycard
To avoid any loss of data, always follow the correct procedure for removing the
card (see the documentation for your operating system).
► On devices with card locking: Press
on the memory card (1).
 The memory card is released and
can now be removed.
► Pull the memory card out of the slot (2).
Memory card
Speaker and microphone
Volumecontrol
Speaker
Microphone
You can find information about the exact position of speakers and microphones
in chapter "Ports and controls", Page 10.
Please refer to chapter "Key combinations", Page 41 for information on setting the volume
and also enabling/disabling the speakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
You can find information on connecting headphones and a microphone in
chapter "Connecting external devices", Page 70.
Fujitsu
51
Working with the notebook
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in
a mobile telephone or notebook and, together with an integrated UMTS/LTE
module, enables access to a mobile radio network.
Follow the instructions supplied by the provider of the SIM card.
Inserting a SIM card
► Remove the rechargeable battery, see "Removing a battery", Page 46.
► Remove the SIM card carrier from
its location (1).
► Insert the SIM card (2) in the SIM
card carrier as shown symbolically on
the SIM card carrier.
► Push the SIM card carrier back into
its location (3).
► Install the rechargeable battery again, see "Installing a battery", Page 48.
52
Fujitsu
Working with the notebook
Removing a SIM card
► Remove the rechargeable battery, see "Removing a battery", Page 46.
► Remove the SIM card carrier from
its location (1).
► Remove the SIM card from the SIM
card carrier (2).
► Push the SIM card carrier back into
its location (3).
► Install the rechargeable battery again, see "Installing a battery", Page 48.
Optional wireless LAN / Bluetooth / 4G
wireless components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on the system configuration ordered, your system will be equipped
with wireless LAN, Bluetooth and / or 4G.
Switching the wireless components on and off
► Press the key combination Fn + F5 to switch the wireless components on and off.
 The wireless component indicator will illuminate when one or more wireless
components are switched on.
Bluetooth
WirelessLAN
The Bluetooth 4G modules and the wireless LAN transmission unit (antenna) will
all be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can obtain more information on 4G from your service provider.
Fujitsu
53
Working with the notebook
Configuring WLAN access
•
Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter "WLAN specifications", Page 88.
Access via 4G
If you have ordered an integrated 4G module with your system, your device
is ready for use straight away.
You can find information on establishing the connection with the 4G network
in the documentation for the hardware used.
Your device can connect with the Internet via 4G. To do this, use one of
the following types of connection:
•
•
•
54
Integrated 4G module (availability dependent on model variant)
USB dongle (a USB stick containing a SIM card from your cellular phone network provider)
A mobile end-device (e.g. cellular phone with Bluetooth or cable connection)
Fujitsu
Working with the notebook
Notes
Fujitsu
55
Working with the notebook
Ethernet and LAN
EthernetLAN
You can use an Ethernet LAN when you use a LAN adapter, which can be obtained as an option.
You can use it to establish a connection to a local network (LAN = Local Area Network).
► Pull the LAN adapter out of the LAN port on
the notebook in the direction of the arrow.
► Push the LAN adapter upwards in the
direction of the arrow (1).
► Plug the network cable into the
LAN adapter (2).
► Connect the network cable to your
network port.
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
56
Fujitsu
Working with the notebook
Your port replicator (optional)
Your port replicator is a device that helps you to quickly connect your notebook to
your peripheral devices, such as a monitor, printer, etc.
The features offered by the port replicator include standard ports for
monitor, audio, mouse and keyboard.
You need only dock the notebook in order to work with your peripheral devices.
Ports on the port replicator
Ports
Portreplicator
10
Security Lock
USB ports
LAN port
Display Port
DVI port
VGA monitor port
Fujitsu
7 = DC input connector (DC IN)
8 = Connector on the port replicator for the
docking port on the bottom of the notebook
9 = Release
10 = ON/OFF button
57
Working with the notebook
Setting up the port replicator
Select a suitable location for the port replicator before setting it up. In
doing so, please follow these instructions:
•
•
•
•
58
Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).
This can block the air vents of the notebook and cause overheating and damage.
Place the port replicator on a stable, flat and anti-slip surface. Please note that
the rubber feet may mark certain types of surfaces.
Never place the port replicator and the mains adapter on a heat-sensitive surface.
Do not expose the port replicator to extreme environmental conditions.
Protect the port replicator from dust, humidity and heat.
Fujitsu
Working with the notebook
Connecting the notebook to the port replicator
► Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.
► Place the notebook on the port replicator so that the connector on the underside of
the notebook aligns with the connector on the port replicator (1).
► Press down on the notebook’s rear corners so that it locks into position (2).
► Connect the AC adapter cable to the DC input connector (DC IN) of the port replicator (3).
► Connect the AC cable to the AC adapter (4).
► Plug the AC cable into the power outlet (5).
Fujitsu
59
Working with the notebook
Switching on the notebook via the port replicator
► Press the ON/OFF button on the port replicator to switch on the notebook.
Switching off notebook via port replicator
► Close all applications and then shut down your operating system (please
refer to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF button on
the port replicator for approx. four seconds. The notebook will switch off.
However, any unsaved data may be lost in the process.
60
Fujitsu
Working with the notebook
Disconnecting the notebook from the port replicator
► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.
► Lift off the notebook (2).
Fujitsu
61
Security functions
Security functions
Securityfunctions
Your notebook has a variety of security functions that you can use to protect your
system and your personal data from unauthorized access.
This chapter explains how to use these functions, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,
you may be locked out of the system and unable to access your data.
Therefore, please note the following information:
•
Make regular backups to external optical disks such as external hard
drives, CDs, DVDs or Blu-ray Discs.
• Some security functions need you to choose passwords. Make a note
of the passwords and keep them in a safe place.
If you forget your passwords you will need to contact our Service Desk.
Deletion or resetting of passwords are not covered by your warranty
and a charge will be made for assistance.
62
Fujitsu
Security functions
Brief overview of the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "http://www.fujitsu.com/us/support/".
Security function
Security Lock
Fingerprint sensor (device
dependent)
BIOS password protection
Boot from Removable Media
Owner Information
SmartCard reader (device
dependent)
Trusted Platform Module
(device dependent)
Fujitsu
Preparation
Fit and lock the Kensington
Lock Cable (accessory).
Biometric
Install the supplied fingerprint
software.
Password protection for
Specify at least one supervisor
the BIOS Setup, operating
password in the BIOS Setup
system and hard disk with
and activate the password
supervisor and user password. protection for the operating
The passwords consist of a
system and hard disk as
maximum of eight alphanumeric desired.
characters.
Prevents unauthorized booting In the BIOS Setup, go to the
of an operating system from
Security menu and edit the Boot
external media (e.g. USB stick, from Removable Media option.
USB CD-ROM drive, etc.).
Display service desk or owner In the BIOS Setup, go to the
information during the boot
Security menu and edit the
process.
Owner Information option.
Type of protection
Mechanical
PIN and SmartCard protection
for the operating system
To use the SmartCard reader
functions, install the supplied
(or other suitable) software.
Identification and authentication Define a supervisor password
of the notebook
in the BIOS Setup and enable
the TPM (Security Chip).
63
Security functions
Configuring the fingerprint sensor
Fingerprintsensor
The fingerprint sensor can record the image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
► Install the fingerprint software to be able
to use the fingerprint sensor (1).
You can obtain further information on the fingerprint sensor in the
"appendix: Miscellaneous Information".
Using the Security Lock
Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
► Fit the Kensington Lock Cable to the
mechanism on your notebook.
LockCable
lock
Mechanicalsecurity
Kensington
Usingthesecurity
Anti-theftprotection
Attach another Kensington Lock Cable to your port replicator to protect your port
replicator from theft as well. There are two security lock devices on your port replicator.
64
Fujitsu
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup
Utility, please proceed as follows to increase data security:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your notebook. Passwords are
not covered by your warranty and a charge will be made for assistance.
Password protection
Your password can be up to eight characters long and can contain letters and
numbers. No distinction is made between uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor password
and user password)
If you have opened these operating instructions on the screen, we recommend
that you print them out. You cannot call up the instructions on the screen
while you are setting up the password.
BIOS SetupUtility
The supervisor password and the user password both prevent unauthorized use of the BIOS
Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup
Utility, while the user password will only give you access to some of the functions. You can
only set up a user password if a supervisor password has already been assigned.
Calling and using the BIOS Setup Utility is described in the chapter
"Settings in BIOS Setup Utility", Page 76.
Assigning the supervisor and user passwords
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.
 With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.
 Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
 Changes have been saved is displayed as a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
 If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
 The notebook is then rebooted and the new password comes into effect. It will now be necessary
to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIOS settings.
password
Userpassword
Supervisor
Password
Fujitsu
65
Security functions
Changing the supervisor password or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
User password
Supervisorpassword
Password
► Start the BIOS Setup Utility and go to the Security menu.
► When changing the password, proceed exactly as when assigning a password.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
User password
Supervisorpassword
Password
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
 You will be requested to enter the current password by the Enter Current Password prompt.
Enter New Password will appear and you will be requested to enter a new password.
► Press the Enter key twice at this request.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
 The notebook will now reboot with the password removed.
With the supervisor password, you simultaneously deactivate the user password.
Password protection for booting the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "Assigning the supervisor and user passwords", Page 65), you can
also prevent booting of the operating system.
Operating system
Activating system protection
►
►
►
►
Start the BIOS Setup Utility and go to the Security menu.
Select the Password on Boot option and press the Enter key.
Select the option you require (Disabled, First Boot or Every Boot) and press the enter key
Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Operatingsystem
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
 If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
 The notebook will reboot. The system is no longer password-protected.
Operatingsystem
66
Fujitsu
Security functions
Password protection for the hard disk
If a supervisor password was set, an additional password for the hard disk
can be set in the Hard Disk Security menu.
The hard disk is protected by this password. Data on this hard disk can then only be
read in another system if the correct password is entered.
Smart Card reader
Securityfunctions
Smart Cards are not supplied as standard equipment. You can use all Smart Cards that comply with
the ISO standard 7816-1, -2 or -3. These Smart Cards are available from various manufacturers.
With the appropriate software you can use your Smart Card as an alternative to password
protection, but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two Smart Cards. Always keep one of the Smart Cards
in a safe place if you are carrying the other Smart Card with you.
Inserting the Smart Card
Do not use force when inserting and removing the Smart Card.
Make sure that foreign objects do not fall into the Smart Card reader.
► Slide the Smart Card into the Smart
Card reader with the chip facing upwards
(or downwards depending on the
device) and to the front.
Fujitsu
67
Security functions
Using the security function of the tablet buttons
If you have allotted a supervisor and/or user password in the form of tablet button combinations as
described below, you can use the tablet buttons to enter this when you start your device.
Assigning the supervisor password
► Select Start - Run.
► Enter the following information in the prompt: C:\Program Files\Fujitsu\Security
Panel Application\Supervisor\FJSECS.EXE.
► Confirm with Enter .
► Follow the instructions on the screen.
Assigning the user password
► Select Start - All Programs.
► Select Security Panel Application - Security Panel Application.
► Follow the instructions on the screen.
Entering passwords via the tablet buttons
The passwords for entry via the tablet buttons usually consist of a combination of buttons,
e.g. button 2 + button 3 , followed by button 1 and button ENT .
► Enter your password using buttons 1 to 4 .
► Confirm with ENT .
 The device will be unlocked.
68
Fujitsu
Security functions
Trusted Platform Module - TPM (device dependent)
Trusted Platform Module
TPM
To use the TPM, you must enable the TPM in the BIOS-Setup before the software is
installed. The requirement for this is that you have assigned at least the supervisor
password (see "Security functions", Page 62).
Enabling TPM
•
►
►
►
Requirement: You have assigned a supervisor password (see "Security functions", Page 62).
Call BIOS Setup and select the Security menu.
Mark the TPM Security Chip Setting field and press the Enter key.
Select the entry Enabled to enable the TPM
Once you have enabled the TPM the Clear Security Chip menu item appears.
You can clear the holder in the TPM using Clear Security Chip. With Enabled,
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by applications are deleted.
Take note that you can then no longer access the data you have
encrypted on the holder-based keys!
► From the Exit menu, select the option Exit Saving Changes.
► Press the Enter key and select Yes.
 The notebook restarts and the TPM is switched on after the reboot.
Disabling TPM
•
►
►
►
►
►
Requirement: You have assigned a supervisor password (see "Security functions", Page 62).
Call BIOS Setup and select the Security menu.
Mark the TPM Security Chip Setting field and press the Enter key.
Select the entry Disabled to disable the TPM.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Yes.
The notebook will now reboot with TPM deactivated.
Fujitsu
69
Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
HDMI port
HDMIport
The HDMI port on your notebook can be used to connect an external amplifier,
LCD TV or a plasma TV with an HDMI connection.
► Connect the data cable to the
external device.
► Connect the data cable to the HDMI
port of the notebook.
70
Fujitsu
Connecting external devices
Connecting an external monitor to the port replicator
An analog monitor is connected to the analog VGA monitor port, a digital monitor to the DisplayPort
or to the DVI-D monitor port on the optional port replicator. Monitor output is limited to a maximum of
two monitors at any one time (see "Key combinations", Page 41, section "Toggle output monitor").
Monitorconnection
Screenconnection
VGAsocket
Monitor
Digital DisplayPort
Analog VGA monitor port
Digital DVI-D monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch back and forth between the external screen and the LCD
screen of the notebook, see chapter "Key combinations", Page 41.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu
71
Connecting external devices
Connecting USB devices
USBports
On the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the
external device.
► Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognized and installed by your operating system.
72
Fujitsu
Connecting external devices
USB port with charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the notebook be operated with the AC adapter connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The AC adapter must already be connected when the notebook is switched
off, as otherwise the USB charging function will be disabled and the
connected USB devices will not be charged.
Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB
charging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched off.
You can use this USB port to charge or supply power to a USB device (e.g. to charge
a PDA or a mobile phone or to connect a USB lamp).
This is possible even when the notebook is switched off; in the BIOS-Setup-Utility in the Advanced
menu the function Anytime USB Charge must be activated. If the setting AC is selected thereby,
the device will only be charged when the mains adapter is connected.
Calling and using the BIOS-Setup-Utility is described in the section
"Settings in BIOS Setup Utility", Page 76.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► With the left mouse button, click on the symbol in the taskbar for safe removal of hardware.
► Select the device you wish to shut down and remove.
► Press the "Enter" key.
 Wait for the dialog box which tells you that it is now safe to remove the device.
Fujitsu
73
Connecting external devices
Headphones port
Connectingaudio devices
Connectingheadphones
Audioconnections
You can connect headphones or external speakers to your notebook via the headphones port.
► Connect the audio cable to the
external device.
► Connect the audio cable to the headphones
port of the notebook.
 The internal speakers are disabled.
If you buy a cable from a retailer, please note the following information:
The headphones port on your notebook is a "3.5 mm jack".
If you want to connect headphones or speakers you will need a "3.5 mm jack plug".
74
Fujitsu
Removing and installing components during servicing
Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorized
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Incaseofservice
Components
Fujitsu
75
Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOS SetupUtility
System
Configuringhardware
Configuringsystem
Setup
Configuration,BIOSSetupUtility
settings,BIOSSetupUtility
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the notebook.
When a notebook is delivered, the factory default settings are effective. You can change
these settings in the menus of the BIOS Setup Utility. Any changes you make take
effect as soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
About
System
Advanced
Security
Boot
Exit
Displays information relating to the BIOS, processor and notebook
Advanced system settings
Configuration of various hardware components, such as mouse, keyboard,
processor
Password settings and security functions
Configuration of the start-up sequence
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Reboot the device (switch off/on or reboot the operating system).
 Depending on the setting for Fast Boot in the BIOS-Setup-Utility, the following
notification may appear on the screen during start-up:
 BIOS Setup  Boot Menu
BIOSSetupUtility
► Press the function key F2 .
► If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service center.
The BIOS Setup Utility starts.
76
Fujitsu
Settings in BIOS Setup Utility
BIOS Setup Utility operation
BIOS SetupUtility
Press the F1 key to display help about operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
► Use the cursor keys ← or → to select the menu you wish to access to make changes.
The menu is displayed on the screen.
► Select the option you want to change with the cursor keys ↑ or ↓ .
► Press the "Enter" key.
► Press the ESC key to exit the selected menu.
► For future reference, make a note of the changes you have made (for example, in this manual).
Fujitsu
77
Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOS SetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
 The notebook is rebooted and the new settings come into effect.
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
 The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaults – load default values
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes - Discard Changes without
exiting BIOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
 The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
 The changes are saved. You can now make additional settings in the BIOS Setup Utility.
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save changes and power off
► To save the changes and switch off your device, select Save Changes and Power Off and Yes.
 The changes are saved. Your device is shut down.
78
Fujitsu
Troubleshooting and tips
Troubleshooting and tips
Problem solving
Fault
Tips
Troubleshooting
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
► Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
► Switch the notebook off.
► Please contact the Hotline/Service Desk.
You can contact Fujitsu Service and Support in the following ways:
• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)
• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
•
•
•
•
•
•
The model name and serial number of the notebook. The serial number is
located on a sticker on the underside of the notebook.
Notes with the messages that appeared on the screen and
information on acoustic signals.
Any changes you have made to the hardware or software since
receiving the notebook.
Any changes you have made to the BIOS Setup settings after receiving the notebook.
Your system configuration and all peripheral devices connected to your system.
Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind.
This means that considerable effort has been made to optimize components and
equipment in terms of weight, space and energy requirements. Depending on the
particular configuration you have purchased, it is possible that functionality may be
slightly reduced compared to a desktop PC if you are running processor-intensive
gaming software, e.g. games with intensive 3D graphics. Updating your hardware with
drivers which have not been approved by Fujitsu may result in performance losses,
data losses or malfunction of the equipment. A list of approved drivers and current
BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
► For further clarification of the problem, contact the Fujitsu Service Desk. When you do
this, please have ready the ID number and serial number of your system.
Recovering your Factory Image
In the event you need to restore your original Factory Image, please refer to
the appendix of this Operating Manual.
Fujitsu
79
Troubleshooting and tips
The notebook’s date or time is incorrect
Datenotcorrect
Wrongdate/time
Timenotcorrect
Incorrecttime
Cause
Time and date are incorrect.
Date and time are still set incorrectly after
switching on the notebook.
Troubleshooting
► With the BIOS-Setup-Utility, you can set the
date and time in the Main menu.
► Please contact your sales outlet or our
hotline/service desk.
Battery indicator does not illuminate
Cause
The battery is not installed correctly.
The battery is discharged.
Troubleshooting
► Switch the notebook off.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Install a charged battery.
or
► Connect the notebook to a AC outlet
using the AC adapter.
When certain characters are entered on the
keyboard, only numerals are written
Cause
The virtual number keys of your device are
activated, see "Virtual number keys", Page 40
Troubleshooting
► Press the Num button.
The notebook’s LCD screen remains blank
BlankLCDscreen
LCDscreen
Cause
Troubleshooting
Screen is switched off.
External monitor or television set connected.
► Press a key or touch the Clickpad.
► Press the key combination for changing over
the screen output, see "Key combinations",
Page 41.
80
Fujitsu
Troubleshooting and tips
The LCD screen of the notebook is difficult to read
LCDscreen
Cause
Reflected glare
Troubleshooting
► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause
Monitor is switched off.
Power saving has been activated (monitor is
blank).
Brightness is set to dark.
Troubleshooting
► Switch the external monitor on.
► Press any key to continue.
► Adjust the brightness of the monitor.
► Press the key combination for changing over
the screen output, see "Key combinations",
Page 41.
The external monitor’s AC cable or data cable is ► Switch off the external monitor and the
not connected properly.
notebook.
► Check whether the AC cable is plugged
properly into the external monitor and into
the power outlet.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and the
notebook.
Screen output is set to the notebook’s LCD
screen
The external monitor is blank or the image is unstable
Monitor
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
Fujitsu
Troubleshooting
► Terminate the application program under
Windows by pressing Alt + F4 . If the
error persists after terminating the program,
use the key combination for switching the
screen output (see "Key combinations",
Page 41), in order to switch to the LCD
screen of the notebook.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
81
Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Stylus incorrectly calibrated.
Troubleshooting
► Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the Control Panel, see "Adjusting the
stylus", Page 34 and "Calibrating the stylus",
Page 34.
Stylus input not working
Cause
Incorrect driver installed.
Troubleshooting
► If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook does not start after switching it on
Notebook
Cause
The battery is not installed correctly.
The battery is dead.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
The AC adapter is not connected properly.
82
► Connect the AC adapter to the notebook.
► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
Fujitsu
Troubleshooting and tips
The notebook stops working
Ending
Notebook
Cause
The notebook is in energy saving mode.
An application program has caused the
malfunction.
The battery is dead.
Troubleshooting
► End energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The printer does not print
Printer doesnotprint
Cause
The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
Troubleshooting
► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connection to a network does not work
Thewireless connectiontoanetwork does notwork
Cause
The wireless component is switched off.
Troubleshooting
► Switch the wireless component on (see
"Switching the wireless components on and
off", Page 53).
The wireless component is switched on. Despite ► Check whether the wireless connection is
this, the wireless connection to a network does
enabled by the software.
not work.
► Further information on using the wireless
component can be found in the help files.
Fujitsu
83
Troubleshooting and tips
The battery discharges too quickly
Battery
Cause
The battery is either too hot or too cold. In this
case the battery indicator flashes.
Troubleshooting
► Move the notebook so that its temperature
returns to within the normal range.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
► Use the AC adapter whenever possible.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
The maximum brightness may have been set
► Set the screen slightly darker with the
for the screen.
key combination for Decreasing the screen
brightness in order to reduce the amount of
power being drawn.
Smart Card reader is not recognized
Cause
Smart Card inserted incorrectly.
Troubleshooting
► Make sure you have inserted your Smart
Card into the Smart Card reader with
the chip facing upwards / downwards
(device-dependent).
► Check whether the Smart Card you are
using is supported. Your Smart Card must
comply with the ISO standard 7816-1, -2,
-3 and -4.
Smart Card PIN forgotten
Cause
PIN forgotten
Troubleshooting
► If you are working in a network, contact your
system administrator, who can unlock your
notebook with a Supervisor PIN.
Smart Card lost
Cause
Smart Card lost.
84
Troubleshooting
► If you are working in a network, contact your
system administrator, who can boot your
notebook with a Supervisor Smart Card.
Fujitsu
Troubleshooting and tips
User and/or supervisor SmartCard lost
Cause
User and/or supervisor SmartCard lost
Troubleshooting
► If you have lost your user SmartCard, you
can continue to work with the supervisor
SmartCard.
► If you have lost the supervisor SmartCard,
you can also continue working, but you no
longer have all rights and cannot initialize
another supervisor SmartCard.
Acoustic warning
Acoustic warnings
Errors
Cause
A beep sounds every few seconds.
Troubleshooting
► Charge the battery.
The battery is almost dead.
Error messages on the screen
Error messages onthescreen
Errors
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programs are described in the documentation for these programs.
If the error message appears repeatedly despite troubleshooting measures,
contact the place of purchase or our customer service center.
Error message/cause
CMOS Battery Bad
Troubleshooting
► Contact your sales outlet or our customer
service center.
If the error message occurs repeatedly, the
back-up battery in the notebook is dead.
System CMOS checksum bad - Default configuration ► Switch the notebook off.
used
► Switch the notebook on.
The system configuration information is
► Press the function key F2 to access the
incorrect.
BIOS Setup.
► In the BIOS Setup, select the Exit menu.
► Select the entry Load Setup Defaults.
► Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits: ► Check whether the additional memory
zzzz zzzz
module has been inserted correctly.
When testing the extended memory. an error
has resulted at the address xxxx.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
Fujitsu
► Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
85
Troubleshooting and tips
Error message/cause
Keyboard controller error
Keyboard error
nn Stuck key
Operating system not found
Press  to resume,  to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
Previous boot incomplete - Default configuration
used Default values have been set for certain
settings because of an error which occurred in
the previous system boot. Check the settings in
the BIOS Setup.
Real time clock error
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
System battery is dead - Replace and run SETUP
System cache error - Cache disabled
System timer error
86
Troubleshooting
► Switch off the notebook with the ON/OFF
button.
► Wait 3 - 5 seconds and switch on the
notebook again.
If you use an external keyboard:
► Check the connection and reboot the
notebook.
► Make sure that no key is pressed.
► Check in the BIOS Setup whether your hard
disk has been set correctly.
► Make sure that the operating system is
installed on the corresponding drive.
► Press the F1 function key to start the
operating system.
► Press the function key F2 to access the
BIOS Setup.
► Press the F1 function key when prompted
to do so.
► Contact your sales
service center.
► Contact your sales
service center.
► Contact your sales
service center.
► Contact your sales
service center.
► Contact your sales
service center.
outlet or our customer
outlet or our customer
outlet or our customer
outlet or our customer
outlet or our customer
Fujitsu
Technical data
Technical data
Notebook
General
Processor
Main memory (SO DIMM)
6. Generation Intel® Core™ with vPro™
technology (vPro optional, depending on the
configuration)
Maximum 16 GB DDR4
1 slot for 4 GB, 8 GB or 16 GB modules
Electrical data
Protection class
III
Maximum power consumption (with the
80 W (without port replicator) / 80 W (with port
notebook switched on and the battery charging): replicator)
LCD screen
Size
33.78 cm / 13.3" TFT WQHD or FHD (depending
on the configuration)
Resolution
WQHD: 2560 x 1440 pixels
FHD: 1920 x 1080 pixels
Brightness control
Technology
Digitizer and glass panel
32 bit
11 levels
Wide-View High-Bright Display with LED
background lighting
• Dual Digitizer / Touch and Pen support
• Hardened glass
Webcam
Display adapter
Chip
Maximum resolution of external monitor:
Dimensions
Width x Depth x Height
Intel® HD Graphics 520
4096 x 2304 pixels
Weight depending on configuration
Input devices
Keyboard
Clickpad
Tablet buttons
Stylus
Slots
Storage card slot
85 keys, with backlit keyboard
2 keys
1 Windows button, 2 volume buttons
1 freely programmable rocker button
Fujitsu
FHD, 30 fps, with status indicator
320.8 mm x 235 mm x 17.1-19.3 mm / 12.63
inch x 9.25 inch x 0.67–0.76 inch
from 1.5 kg / 3.31 lbs
1 x SD Card
87
Technical data
SmartCard slot
SIM card slot
Ports
HDMI port
LAN port
Microphone port / Line In / Headphones port /
Line Out
Docking port
USB (Universal Serial Bus)
Security Lock
Ambient conditions
Environment class DIN IEC 721
Mechanism class DIN IEC 721
Operating temperature
Transit temperature (2K2)
1x
1x
1x
Socket, RJ45
3.5 mm stereo mini jack
Socket, 54-pin
Total: 2x USB (1 x USB 3.0, 1 x USB 3.0 with
charging function (Anytime USB charge))
1x
7K1
7M2
5 °C .... 35 °C / 41°F .... 95°F
–15 °C .... 60 °C / 5°F .... 140°F
WLAN specifications
Type of network
Transfer rate
Active frequency
Typical operating distances**
Intel® Dual Band Wireless-AC 8265
11a/b/g/n/11ac), Wi-Fi based*
(Automatic switching) IEEE802.11 a and g: 54
Mbps max. data rate; IEEE802.11n: 300 Mbps
max. data rate, IEEE802.11ac: 867 Mbps max.
data rate
• 802.11n: 2.4 GHz or 5 GHz
• 802.11b/g: 2400~2473 MHz
• 802.11a: 4900~5850 MHz
• 802.11a: 2.4 GHz / 5 GHz
•
•
•
•
•
88
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps
802.11ac: 40 ft. (12 m) @ 54 Mbps; 300
ft.(91 m) @ 6 Mbps
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps
802.11n: Estimated double the operating
distance of 802.11g and 802.11a in their
respective frequencies
Fujitsu
Technical data
Number of channels
Security
•
•
802.11a: 8 independent channels
802.11b/g: 11 channels, 3 non-overlapping
channels
• 802.11n: Channel bonding takes two of
the non-overlapping 20MHz channels and
combines it into one 40MHz channel. It is
actually 12 non-overlapping channels with
channel bonding and 24 without. Also it is 1
non-overlapping channel in 2.4GHz when
channel bonding is used.
• 802.11ac: 5 independent channels
Encryption types: compatible with WEP, TKIP,
AES***, WPA 1.0 and WPA 2.0
Encryption key, lengths supported: 64 bits and
128 bits
Maximum recommended number of computers 10 units or less ****
to be connected over wireless LAN (during ad
hoc connection)
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the
interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances given above increase or decrease depending on factors such as the
number of walls, reflecting material or interference by external RF sources.
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of
the fixed length of 24 bits the user may however also set 40 or 104 bits.
**** Depending on the particular practical application, the number of computers which can be
networked is reduced if necessary.
WWAN specifications
Type of Network–
Fujitsu
Sierra Wireless EM7455
89
Technical data
Port replicator (optional)
Electrical data
Protection class
Ports
Monitor port (analog)
Monitor port (digital)
Display Port
LAN port
III
15-pin
25-pin, DVI-D
1x
RJ45
USB (Universal Serial Bus)
Audio
Docking port
Security Lock
Ambient conditions
Environment class DIN IEC 721
Mechanism class DIN IEC 721
4 x USB 3.0
Headphones port
100-pin
1x
Operating temperature
Transit temperature
5℃ .... 35℃ / 41°F .... 95°F
–15°C .... 60°C / 5°F .... 140°F
7K1
7M2
Rechargeable battery
For information on the batteries used in your device, please see
"http://solutions.us.fujitsu.com/www/content/support/contact/index.php".
Rated voltage
Rated capacity
Rated power
14.4 V
45 Wh
3150 mAh
The operating time depends on the device configuration, the active
applications and the energy saving settings.
90
Fujitsu
Technical data
AC adapter for use of the notebook and port replicator
The following technical data applies to the AC adapter included in the scope of delivery
of the notebook and the AC adapter of the optionally available port replicator.
Primary
Rated voltage
Rated frequency
Secondary
Rated power
Rated voltage
Max. rated current
100 V to 240 V (automatic)
50 Hz to 60 Hz (automatic)
•
•
19
•
•
65 W (adapter for notebook only)
80 W (adapter for port replicator only)
3.42 A (adapter for notebook only)
4.22 (adapter for port replicator only)
An additional AC adapter or AC cable can be ordered at any time.
Fujitsu
91
Manufacturer’s notes
Manufacturer’s notes
Disposal and recycling
Notes
You can find information on this subject on your notebook or on our website
("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/").
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a
shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you
may want to replace the battery with a brand new one*. If you replace it, it is important
that you dispose of the old battery properly because batteries contain materials that
could cause environmental damage if disposed of improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the
Rechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organization
dedicated to protecting our environment by recycling old batteries at no cost to you.
RBRC has drop-off points at many convenient locations throughout the United States and Canada.
To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer
Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location.
Remember – protecting the environment is a cooperative effort, and you should
make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site
at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for
battery recycling; RBRC is in no way affiliated with Fujitsu.
DOC (Industry CANADA) Notices
DOC(INDUSTRYCANADA)NOTICES
Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement
sur le matérial brouilleur du Canada.
92
Fujitsu
Manufacturer’s notes
UL Notice
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating
of 19 VDC, with a minimum current of 3.42A (65W). The correct output rating is indicated on the
AC adapter label. Refer to the illustration below for the correct AC adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
•
Do not use this product near water for example, near a bathtub, washbowl, kitchen
sink or laundry tub, in a wet basement or near a swimming pool.
• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
CAUTION:
For continued protection against risk of fire, replace only with the
same type and rating fuse.
WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instruction.
Fujitsu
93
Manufacturer’s notes
ENERGY STAR Compliance
Your Fujitsu system is an ENERGY STAR qualified mobile PC. By
choosing a computer with the latest energy-saving technology, you’re
helping to preserve our environment for future generations. ENERGY
STAR is a joint program of the U.S. Environmental Protection Agency,
U.S. Department of Energy, Natural Resources Canada, and other
governments around the world helping us save money while protecting
the environment through energy efficient products and practices. With
energy costs and global warming top-of-mind for consumers, Fujitsu is
committed to offering solutions that help consumers conserve energy
and improve the quality of our environment.
Sleep mode:
You will notice that your computer is initially set so that the display turns off after 10 minutes of
user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When
going into Sleep mode, the computer also reduces the speed of any active Ethernet network
links. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard
equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference
for the environment. Did you know that the average house can be responsible for twice the
greenhouse gas emissions as the average car? That’s because every time you flip on a light
switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse
gas emissions from power plants. So the more energy we can save through energy efficiency,
the more we help to reduce greenhouse gases and the risks of global warming.
To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".
To read about how Fujitsu is supporting Sustainable Management along with
several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".
94
Fujitsu
Declarations of conformity
Declarations of conformity
Declarationsofconformity
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two
conditions: (1) This device may not cause harmful interference, (2) this device must accept any
interference received, including interference that may cause undesired operation.
Fujitsu
95
FCC and IC Regulatory Information
FCC and IC Regulatory Information
Please note the following regulatory information related to the wireless LAN
device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of
these emissions, however, are far much less than the electromagnetic energy emissions from wireless
devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they
operate within the guidelines found in radio frequency safety standards and recommendations. The
use of Wireless LAN devices may be restricted in some situations or environments, such as:
•
•
•
On board an airplane, or
In an explosive environment, or
In situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN devices in specific environments is
not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modifications made
to this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or television interference
caused by unauthorized modification of this device, or the substitution or attachment of connecting
cables and equipment other than those specified by the manufacturer. It is the responsibility of the
user to correct any interference caused by such unauthorized modification, substitution or attachment.
The manufacturer and its authorized resellers or distributors will assume no liability for any damage
or violation of government regulations arising from failure to comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is
restricted to indoor environments, and the antenna of this device must be integral.
96
Fujitsu
FCC and IC Regulatory Information
Federal Communications Commission and Industry
Canada statement:
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and, (2) This device must accept any interference, including interference
that may cause undesired operation of this device.
Déclaration d’Industrie Canada
Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)
RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement
est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence
nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles
pouvan t causer un mauvais fonctionnement de l’appareil.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
1.
2.
3.
4.
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
Fujitsu
97
FCC and IC Regulatory Information
FCC Radio Frequency Exposure statement
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF exposure have
not found any biological effects. Some studies have suggested that some biological effects
might occur, but such findings have not been confirmed by additional research.
The wireless LAN radio device has been tested and found to comply with FCC radiation
exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65.
The exposure standard for wireless devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.
This device is compliant with SAR for general population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with
the measurement methods and procedures specified in OET Bulletin 65 Supplement C,
and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure
guidelines when tested with the device operating conditions.
Déclaration de la FCC/d’Industrie Canada sur
l’exposition aux radiofréquences
La norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unité
de mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ont
défini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites
d’exposition générales de la population/non contrôlées définies par les règles C95.1-1992 de
l’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodes
et procédures de mesure spécifiées dans le supplément C du bulletin 65 de l’OET (Office
d’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testé
selon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révélé
conforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.
Export restrictions
This product or software contains encryption code which may not be exported or transferred
from the US or Canada without an approved US Department of Commerce export license.
This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesirable operation. Modifications not expressly authorized by Fujitsu
America, Inc. may invalidate the user’s right to operate this equipment.
98
Fujitsu
FCC and IC Regulatory Information
Restrictions concernant l’exportation
Ce produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré du
Canada ou des États-Unis sans un permis d’exportation du département du commerce des
États-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à la
norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter
toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement
de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu
America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.
Canadian Notice
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential
for harmful interference to co-channel mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725
MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primary
users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these
radars could cause interference and/or damage to LE-LAN devices.
Avis pour le Canada
Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé
uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux
systèmes mobiles par satellite fonctionnant sur un même canal.
Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350
MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximale
permise selon l’annexe A9.2 afférent aux périphériques RSS210.
En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance
sont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) des
bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences
et/ou des dommages aux appareils de réseau exempts de licence.
Fujitsu
99
Appendix
Appendix
Before Using the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional
integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the
manual). Before using the WLAN device, read this manual carefully to ensure its correct
operation. Keep this manual in a safe place for future reference.
Wireless LAN Devices Covered by this Document
This document is applicable to systems containing the following device:
•
Intel® Dual Band Wireless-AC 8265
Characteristics of the WLAN Device
•
•
•
•
•
•
100
The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.
The WLAN devices operate in license-free RF bands, eliminating the need to procure
an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz
Unlicensed National Information Infrastructure (UNII) bands.
The WLAN devices are capable of five operating modes, IEEE802.11a, IEEE802.11ac,
IEEE802.11b, IEEE802.11g, and IEEE802.11n.
The WLAN device is Wi-Fi certified and operates (as applicable) at the maximum data rate
of 867 Mbps in IEEE802.11ac mode, 450 Mbps in IEEE802.11n mode (300 Mbps in this
configuration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.
The WLAN devices support the following encryption methods - WEP,
TKIP, CKIP, and AES encryption.
The Wireless LAN devices are compliant with the following standards: WPA,
WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.
Fujitsu
Appendix
Wireless LAN Modes Using this Device
Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity
between multiple computers is established without a central wireless network device, typically
known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer
fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc
networks are an easy and inexpensive method for establishing network connectivity between
multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption
key settings are identically configured on all computers in the Ad Hoc network.
Fujitsu
101
Appendix
Access Point (Infrastructure) Mode
Infrastructure mode refers to a wireless network architecture in which devices communicate with
wireless or wired network devices by communicating through an Access Point. In infrastructure
mode, wireless devices can communicate with each other or with a wired network. Corporate
wireless networks operate in infrastructure mode because they require access to the WLAN in
order to access services, devices, and computers (e.g., file servers, printers, databases).
**
= An optional hub for a wired LAN may
be required depending upon the type
of access point used.
102
** = ADSL modem, cable modem, or similar
Fujitsu
Appendix
How to Handle This Device
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under
normal circumstances, it should not be necessary for you to remove or re-install it. The Operating
System that your mobile computer comes with has been pre-configured to support the WLAN device.
•
•
•
•
Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11ac,
IEEE802.11b, IEEE802.11g, and IEEE802.11n.
The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz
lower, middle, and upper UNII bands.
Microwave ovens may interfere with the operation of WLAN devices since they operate in the
same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves
does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN
devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,
intermittent disconnects, and many frame errors. It is HIGHLY recommended that these
interfering devices be powered off to ensure proper operation of the WLAN device.
Deactivating/Disconnecting the WLAN Device
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery
life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The
WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it
continues to transmit and receive even though it’s not connected.)
► Press the key combination Fn + F5 to deactivate the Wireless Device
 The wireless component indicator will go off when the wireless components are switched off.
Bluetooth
WirelessLAN
Fujitsu
103
Appendix
Configuring the Wireless LAN
The optional WLAN device can be configured to establish wireless network connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with
your network administrator for these parameters:
Configuring the WLAN Using Windows
The WLAN device can be configured to establish wireless network connectivity using
the software that is built into Windows Vista. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters are required for this procedure. Consult your network
administrator for these parameters:
1. From the Modern Start screen, press Windows + X , then select Control Panel from the menu.
2. If the Control Panel is not in Classic View, select Classic View from the left panel.
Double-click the Network and Sharing Center icon.
3. Select Setup a new connection or network.
4. Depending upon what type of connection you would like to make, make a selection. For
an infrastructure network, select Manually connect to a wireless network.
5. Enter the required information. It may be necessary to consult with your network
administrator for some of the information.
6. In the event you require assistance, go to the Network and Sharing Center window (Control
Panel > Network and Sharing Center), and type in relevant keywords in the Search box.
Connection to the network
After you have configured your computer, you can connect to an active network
by performing the following steps:
1. Click on the WLAN icon in the system tray.
2. Select Connect to a network.
3. Select a network from the list that appears, and click the Connect button.
104
Fujitsu
Appendix
Troubleshooting the WLAN
Causes and countermeasures for troubles you may encounter while using your
wireless LAN are described in the following table.
Problem
Possible Cause
Unavailable network connection Incorrect network name (SSID)
or network key
Possible Solution
Ad hoc connection: verify that
the network names (SSID’s)
and network keys (WEP) of
all computers to be connected
have been configured correctly.
SSID’s and WEP key values
must be identical on each
machine.
Access Point (Infrastructure)
connection: set the network
name (SSID) and network key
to the same values as those of
the access point.
Weak received signal strength
and/or link quality
Set the Network Authentication
value identically to that of the
Access Point. Please consult
your network administrator for
this value, if necessary.
Ad hoc connection: Retry
connection after shortening
the distance to the destination
computer or removing any
obstacles for better sight.
Access Point (Infrastructure)
connection: Retry connection
after shortening the distance to
the access point or removing
any obstacles for better sight.
Fujitsu
105
Appendix
Problem
Possible Cause
Unavailable network connection The WLAN device was
(continued)
deactivated or is disabled
Possible Solution
Check if the wireless switch
is turned On. Go to Start >
Control Panel, and doubleclick
on Windows Mobility Center. If
the wireless network is off, click
the Turn wireless on button.
The computer to be connected Check if the computer to be
is turned off
connected is turned ON.
Incorrectly configured network Recheck the configuration of
settings
your network settings.
The use of identical or
RF interference from Access
Points or other wireless
overlapping RF channels can
networks
cause interference with the
operation of the WLAN device.
Change the channel of your
Access Point to a channel
that does not overlap with the
interfering device.
Wireless network authentication Re-check your Network
Authentication, Encryption,
has failed
and Security settings.
Incorrectly configured
security settings such as
an incorrectly typed WEP
key, a mis-configured LEAP
username, or an incorrectly
chosen authentication method
will cause the LAN device to
associate but not authenticate
to the wireless network.
This only applies to networks
Incorrect IP address
using static IP addresses.
configuration
Please contact your network
administrator for the correct
settings.
106
Fujitsu
Appendix
Using the Bluetooth Device
Bluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are Bluetooth
Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.
What is Bluetooth
Bluetooth technology is designed as a short-range wireless link between mobile devices, such
as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create
Personal Area Networks (PANs) between devices in short-range of each other.
Proceed as follows to individually enable or disable wireless LAN or Bluetooth devices:
1. Switch on the WLAN/Bluetooth via the key combination Fn + F5 .
2. In the screen Modern Start, select the option Charms > Settings
> Change PC Settings > Wireless.
3. Under Wireless > Wireless Devices, click on the switch Bluetooth to switch on Bluetooth.
Where to Find Information About Bluetooth
For additional information about Bluetooth Technology, visit the Bluetooth
Web site at: "www.bluetooth.com".
FCC Radiation Exposure Statement
This system complies with the FCC limit values for radio frequency radiation in an uncontrolled
environment. The Bluetooth antenna is located at the top edge of the LCD screen and is exempt
from the criteria for minimum distance because of its low power consumption.
The transmitter used in this system must not be operated together with other antennas or transmitters.
Canadian Notice
To prevent radio interference to licensed services, this system is designed for use in indoor spaces
/ in buildings and not directly at window openings, to allow a maximum shielding.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
Fujitsu
107
Appendix
Image Backup and Recovery Procedures
The following instructions cover separate Backup and Recovery Procedures for Windows®
7 and Backup and Recovery Procedures for Windows 10. Please follow instructions
that are applicable to your system’s operating system.
Windows® 7 Procedures
It is very important that you create DVD copies of your Recovery Image and
Bootable Disc before beginning to use your system.
It is also important that you create a copy of essential software to external writable
media or an external drive. Follow the instructions in the "“Creating a Backup of the
System-Specific Software Drivers”"section to create the copy.
Creating a Backup of Bootable Disc and Recovery
Image for Windows 7
When you purchased your new system, a copy of the recovery image was loaded into a
hidden partition on your hard disk drive. Having a copy of the recovery image available to
you means that in the event of system failure, you will be able to restore it.
To make a copy of the recovery image to DVD discs, you will need three or four blank
discs to create the copy. After creating the copy, be sure to label the discs and keep
them in a safe place to ensure they do not get damaged.
Note: If your system does not have an internal writable DVD drive, connect your system
to an external drive* before beginning the following steps.
* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, SOME MEDIA
TYPES MAY BE INCOMPATIBLE FOR CREATING IMAGE BACKUPS.
1. Launch System Restore and Recovery from the desktop icon. It will allow you to create
the Bootable Disc and the Recovery Image Disc Set.
2. On Step 1: Select the Bootable Disc from the list:
a. Select a media type.
b. Notice the number of discs that are needed for the set.
c. Click Next to proceed.
3. On Step 2: Confirm your Recovery Disc, click Next.
4. On Step 3: follow the on-screen instructions to make the disc or disc set, then click Start.
It takes approximately 20 minutes to make one disc.
5. On Step 4, when the disc creation is completed, a message appears.
Click Finishto exit the program.
6. Repeat Step 1: Select Recovery Disc from the list and repeat the above
steps 2(a), 2(b), 2(c), 3, 4 and 5.
108
Fujitsu
Appendix
Creating a backup of the System-Specific Software Drivers
We recommend you to create a backup of the content of the C:\Drivers on your system
to writable media or an external drive. System-specific software drivers are also
available for download through the Fujitsu support site.
WINDOWS 7 RECOVER YOUR SYSTEM WHEN THE
HARD DRIVE IS STILL ACCESSIBLE
Using the Recovery and Utility Tools
The Recovery and Utility tools consist of a variety of tools that will help you recover your
recovery image and system images, and delete the data from your hard drive.
Methods for accessing the utilities
Recovery and Utility Tools are preinstalled in a hidden partition by the factory, or
they can be accessed by using the bootable disc.
Note: The Recovery and Utility tools may be deleted from your hard disk drive if you modify the
partitions. If that occurs, you will not be able to use the hidden partition for booting to Recovery
and Utility Tools, but you will still be able to boot from the Bootable Disc.
Determining whether Recovery and Utility is pre-loaded
1. Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key.
2. Use the Tab key to get to the Application Menu.
3. Check whether the Recovery and Utility option is present. If it is not present, it means that
the utility must be used from the Bootable Disc. Proceed to the "“Running Recovery and
Utility from the Bootable Disc”"section if Recovery and Utility is unavailable.
Running Recovery and Utility from hard disk
Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key.
Use the Tab key to get to the Application Menu.
Move the cursor down to Recovery and Utility and press the Enter key.
Choose your language, if necessary. Select Recovery and Utility to proceed.
Three tool options appear: Diagnostics, Recovery, and Utility (refer to the" Recovery and
Utility tools "section below for instructions on how to use these tools).
6. If this was successful please skip the next step and go to the "Recovery and Utility tools" section.
7. If this was NOT successful, please go to the next step.
1.
2.
3.
4.
5.
Running Recovery and Utility from the Bootable Disc
Note: If your system does not have an internal writable DVD drive, connect
your system to an external drive.
To verify/change the boot-up priority (rather than booting-up from the hard drive or
an external media drive), perform the following steps:
1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.
2. Insert the bootable disc into the drive tray.
3. Highlight the CD/DVD option from the Boot menu, then press Enter .
Fujitsu
109
Appendix
4. Click OK.
5. Select CD/DVD boot mode: UEFI Mode, if applicable then press Enter . While the
files are being loaded from the disc, the Fujitsu logo screen will appear followed
by a progress bar at the bottom of the screen.
Recovery and Utility tools
Note: Recovery and Utility tools may not be available on your system depending
on the region from which the system was shipped.
Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you
will need to use this tool. If you should need to use this tool, perform the following steps:
1. Press the Diagnostics Toolbutton to start the Diagnostics tool.
2. Read the note, and then click OK.
3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics
Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disc, Keyboard, and Mouse.
4. Click the Option button in the Tool menu to specify how many times the tool
should run diagnostics on each selected component.
5. Press Execute to start the Diagnostics tool.
6. After the execution is completed, the selected components are circled in red to indicate that they
have been diagnosed and the result dialog window opens. Click Close to close the window.
7. Click End to close the Diagnostics tool, and then click Yes to confirm the end of diagnostics session.
Recovery tool: The Recovery tool contains two options:
• Restore C Drive: Restore recovery image (only C: drive)
• Restore Full Hard Drive: Restore recovery image (full hard drive).
You can use these tools to restore the Recovery Image from the hidden partition, and perform a full
hard drive recovery. Please refer to instructions above for details on how to create a Recovery Image.
Restore the Recovery Image from the Hidden Partition
1. Click Restore C: drive from the Recovery and Utility tools.
2. The progress bar is followed by Restore Recovery image (only C: drive) screen confirming
that the image will be restored to the C: drive. Click Next.
3. Read the instructions screen and select Agree, then click Next.
4. Click OK to acknowledge the warning message to restore recovery image to the C: drive.
5. When the progress bar appears, wait for the process to complete.
6. Click Finishwhen the process completes; the computer will restart to Windows.
110
Fujitsu
Appendix
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE
IS NOT BOOTABLE FOR WINDOWS 7
Restore the Recovery Image for Full Hard Disk
Follow the steps in the "Recovering your Recovery Image using Recovery and Utility
(for new hard drive or non-bootable hard drive)"section. You will need the Bootable
Disc and the Recovery Disc Set for this task.
Utility tool: If applicable for your region, the Utility tool contains two options:
Hard Disk Data Delete and Partition Creation.
The Hard Disk Data Delete utility is used to delete all data on the hard disk
and prevent the data from being reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain
that you want to erase your entire hard disk, including all partitions.
To delete hard disk data:
a. Click the Hard Disk Data Delete button. The progress bar appears, followed
by the End User License Agreement (EULA) screen.
b. Agree to the EULA and click Next.
c. Choose the hard disk from which the data should be deleted in the
list of hard disks and click Next.
• The Partition Creation utility is used to change the C: and D: drive partition sizes.
WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a
hard drive. A mistake could possibly destroy your computer, your new hard drive or both.)
•
Fujitsu
111
Appendix
Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-bootable hard drive)
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.
Note: You will need the Bootable disc and Recovery Image disc set for this recovery.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
112
Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.
Insert the bootable disc in your DVD drive, then click OK.
Highlight the CD/DVD option from the Boot Menu and press Enter .
Select CD/DVD boot mode: Select UEFI Mode, if applicable and press Enter .
While the files are being loaded from the disc, the Fujitsu logo screen appears
followed by a progress bar at the bottom of the screen.
Choose your language, if necessary.
Three tool options appear: Diagnostics, Recovery and Utility. Select Recovery.
• Select Restoring the Factory Image (full hard drive recovery).
Click Next to confirm full hard drive restoration. All data on the hard disk drive will be deleted.
Agree to the EULA by selecting the Agree option and clicking Next.
Click Next on the Recovery Disc. Check screen to verify that the bootable
disc has been inserted into the optical drive.
The Checking for Recovery Disc screen appears followed by the prompt to insert the
first disc. Click OK to continue. Repeat this step for all discs. After all recovery discs
have been checked and the check has been completed, click Next.
Follow the prompt to reinsert the first recovery disc and click Next.
Click OK when you receive the final warning informing you that all data on hard
diskdrive C will be lost. This starts the recovery process.
Follow the prompts to insert the next recovery discs and click OK.
After the copying of the image to the hard disk drive completes the restore
process is complete, click Finish to restart the system. The computer will restart
automatically and then go through the first boot process.
Fujitsu
Appendix
Installing the Software after the Recovery Image is Restored
Note: The following steps are needed only if you restore the image from the
DVD Recovery Disc Set that you purchased.
Installation of essential access software
1. Insert the bootable disc in your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.
3. You can now connect to the Internet and download FSDM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. When the software packages are downloaded from the web, it is important to
download the Auto Installer Software package and the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder
and Readme file in the same location as other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Account Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA is displayed for the Fujitsu Software Auto Installer, accept
the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software downloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
9. Click the Install button to start the installation.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. The You must restart the system for the settings to take effect. Do you wish to
reboot now? message appears. Select Yes.
12. The system will now reboot.
Fujitsu
113
Appendix
Windows® 10 Procedures
It is very important that you create your Recovery Drive before beginning to use your system.
It is also important that you create a backup of the content of the C:\Drivers on your
system to writable media or an external drive. System-specific software drivers are
also available for download through the Fujitsu support site.
Note: Most of the information below comes from the Microsoft® page
"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options" .
Please refer to it for more details.
Creating a recovery drive
A recovery drive can help you troubleshoot and fix problems with your PC, even if it
won’t start. To create one, all you need is a USB flash drive. Windows will inform you
of the size the USB flash drive needed to hold the required data.
1. From the taskbar, search for Create a recovery drive and then select it. You may be
asked to enter an administrator password or confirm your selection.
2. When the tool opens, make sure Backup system files to the recovery drive
is selected and then select Next.
3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of
files need to be copied to the recovery drive, so this could take some time.
4. When it’s done, select Finish.
Note:
If you chose not to back up the system files when you created your recovery drive on
Windows 10, you won’t be able to use it to reinstall Windows.
Recovery options in Windows 10
If your PC isn’t running as quickly or reliably as it used to, try one of these recovery
options. The following table can help you decide which one to use.
Problem
Your PC isn’t working well and you recently
installed an app, driver, or update.
Your PC isn’t working well and it’s been a while
since you installed anything new.
Try this
Restore from a system restore point
Your PC won’t start and you’ve created a
recovery drive.
Your PC won’t start and you haven’t created a
recovery drive.
Use a recovery drive to reinstall Windows
Reset your PC
Use installation media to reinstall Windows
Restore from a system restore point
This option takes your PC back to an earlier point in time, called a system restore point. Restore
points are generated when you install a new app, driver, or Windows update, and when you
create a restore point manually. Restoring won’t affect your personal files, but it will remove
apps, drivers, and updates installed after the restore point was made.
114
Fujitsu
Appendix
1.
2.
3.
4.
Right-click (or press and hold) the Start button, and then select Control Panel.
Search Control Panel for Recovery.
Select Recovery -Open System Restore - Next.
Choose the restore point related to the problematic app, driver, or update,
and then select Next -Finish.
Note: If you don’t see any restore points, it could be because the system protection isn’t turned
on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Configure
System Restore - Configure and make sure Turn on system protection is selected.
Reset your PC
Option
Keep my files
Remove everything
What it does
This reinstalls Windows 10, but keeps your personal files and any
apps that came with your PC. It removes:
• Changes you made to settings
• Apps and drivers you installed
This reinstalls Windows 10 and any apps that came with your PC.
It removes:
• Personal files
• Changes you made to settings
• Apps and drivers you installed
If you’re planning to donate, recycle, or sell your PC, use this option
and choose to fully clean the drive. This might take an hour or
two, but it makes it harder for other people to recover files you’ve
removed.
Use a recovery drive to reinstall Windows
Note: This process utilizes the USB Recovery Drive that you created in the
previous section "Create a Recovery Drive".
1. Connect the recovery drive and turn on your PC.
2. On the Choose an option screen, select Troubleshoot - Reset this PC, and then
choose the reset option that’s best for you.
If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personal
files, apps and drivers you installed, and changes you made to settings. If you repartitioned the
drive Windows is installed on, note that this will restore the drive’s default partitions.
Use installation media to reinstall Windows
If you have installation media, like a Recovery DVD that you purchased from
Fujitsu, you can use it to reinstall Windows. You will need to install additional
drivers and applications after reinstalling Windows.
To reinstall Windows, follow the steps below:
1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.
2. Insert the bootable disc in your DVD drive.
3. Highlight the CD/DVD option from the Boot Menu and press Enter .
Fujitsu
115
Appendix
4. Follow the on-screen instructions to restore the image.
• Select the language.
• At the Windows Setup dialog window, enter your OS, language and other
preferences and click Next to continue.
• Click Install now to proceed with reinstalling Windows.
• At License terms, check on I accept the license terms and click Next.
• At Which type of installation do you want, click on Custom: Install Windows only (advanced).
• Delete all partitions on the drive and click Next. Installation of Windows will start. This will
take some time so please wait until the installation is finished and the system restarts.
5. When the system restarts, perform all set-up steps to arrive at the Desktop.
6. Connect to the Internet.
7. Use the Backup of the contents of the C:\Drivers to install needed drivers and
applications to your system. If it is not available, download the software from the
Fujitsu Support Site, as described below in the "Auto Installation support for the
software downloaded from support website" section below.
Installation of essential access software
1. Insert the bootable disc in your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.
3. You can now connect to the Internet and download FSDM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. When the software packages are downloaded from the web, it is important to
download the Auto Installer Software package and the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder and
Readme file in the same location as the other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Account Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software downloaded from the support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
9. Click the Install button to start the installation.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
116
Fujitsu
Appendix
11. You must restart the system for the settings to take effect. Do you wish to reboot
now? message appears. Select Yes.
12. The system will now reboot.
Downloading driver updates
To ensure that you always have the most current driver updates related to your system,
you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.
The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view
and download the most current drivers, utilities and applications to determine whether
you have the latest versions. To download the FSDM utility, go to the support site:
"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".
Fujitsu
117
Index
Index
AC adapter
connecting 19
Set up 19
Acoustic warnings 85
Activate
keyboard backlight 41
Alt+Tab 42
Anti-theft protection 64
Audio connections 74
Back tab 42
Backspace 38
Backspace key 38
Battery 45
battery charge 49
Caring for and maintaining 45
charge level 45
Charging 45
Discharges too quickly 84
see Rechargeable battery 45
Self-discharge 45
Service life 45
Storing 45
battery charge meter 45
BIOS Setup Utility
, protecting with password 65
calling 76
exiting 78
operation 77
Settings 76
Blank LCD screen 80
Bluetooth
switching module off 53, 103
switching module on 53, 103
Bluetooth, Safety notes 14
Bonus Apps 21
Caps Lock 39
Caps Lock key 39
Charge capacity, battery 45
Choose a location 19
Clickpad 36, 41
buttons 36
Deactivating 41
Dragging items 37
Executing commands 36
Moving the pointer 36
118
Selecting an item 36
Clickpad buttons 41
Components
Installing/Removing 75
Configuration, BIOS Setup Utility
Configuring hardware 76
Configuring system 76
Connecting audio devices 74
Connecting headphones 74
Ctrl+Alt+Del 42
Cursor control 39
Cursor keys 39
76
Date not correct 80
Deactivate
keyboard backlight 41
Declarations of conformity 95
Display orientation
select 29
DOC (INDUSTRY CANADA) NOTICES
92
Ending
energy saving mode 83
Energy
Energy consumption 49
Energy saving 14
Energy saving functions 49
Enter 38
Enter key 38
Error messages on the screen 85
Errors
Acoustic warnings 85
Screen messages 85
Ethernet LAN 56
Fault
Elimination 79
Fingerprint sensor 64
configuring 64
First-time setup 18
Fn key 39
Fn+F10 42
Fn+F2 41
Fn+F3 41
Fn+F4 41
Fn+F5 41
Fujitsu
Index
Fn+F6
Fn+F7
Fn+F8
Fn+F9
41
41
41
42
see VGA socket
Getting started
HDMI port
18
70
Important notes 13
In case of service 75
Incorrect time 80
Information,
safety 13
Kensington Lock Cable
Key combinations 41
Keyboard 37
keys 37
64
Landscape format
display 29
LCD screen
Decrease brightness
difficult to read 81
Notes 32
reflected glare 81
Remains blank 80
Line feed 38
Making ready to use 19
Mechanical security 64
Memory card
handling 50
inserting 50
removing 51
Microphone 51
Mobile operation 15
Monitor
connection 71
no image 81
remains blank 81
unstable image 81
Monitor connection
Fujitsu
71
Notebook
before traveling 15
does not start 82
not working 83
operating 22
switching off 30
transporting 15
Notebook: switching on 25
Notes 13
disposal / recycling 92
Energy saving 14
LCD screen 32
Transport 15
Num Lock
indicator 40
Number keypad 37
Numeric keypad 37
see Virtual number keys
40
Operating system
activating system protection 66
cancel system protection 66
Protecting with password 66
Operation, notebook 22
41
Packaging 18
Password
changing 66
entering 65
removing 66
Password protection 65
Pen 33
Port replicator
Ports 57
Portrait format
display 29
Ports
Port replicator 57
Power saving 14
Power-on indicator 25
Printer does not print 83
Problem solving 79
Radio components
Safety notes 14
119
Index
Rechargeable battery
see battery 45
Return 38
Safety information 13
Screen brightness
Decrease 41
Increase 41
Screen connection
see VGA socket 71
Security functions 62
Smart Card 67
SystemLock 67
Self-discharge, battery 45
Service life, battery 45
Set up
Device 19
Setup
see BIOS Setup Utility 76
Shift 39
Shift key 39
Shift+Tab 42
Slot
Memory cards 50
Speaker 51
Status indicators 22
Supervisor password
change 66
entering 65
removing 66
Switch off
speakers 41
Switch on
speakers 41
Switching between screen outputs 42
Switching on for the first time 20
Symbols
Indicators 22
System settings, BIOS Setup Utility 76
Tab key
120
The wireless connection to a network
does not work 83
Time not correct 80
Tips 79
TPM 69
Transport 15
Damage during transportation 18
Traveling, notebook 15
Troubleshooting 79
Trusted Platform Module 69
UMTS 55
antenna 55
USB charging function 73
USB ports 72
User password
change 66
entering 65
removing 66
Using the security lock 64
VGA socket 71
Virtual number keys
Volume
increase 42
reduce 41
Volume control 51
40
Webcam 44
Windows key 39
Wireless components 41
Wireless LAN
Safety notes 14
switching module off 53, 103
switching module on 53, 103
Wrong date/time 80
38
Fujitsu

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : miclem
Create Date                     : 2016:02:26 11:18:50+01:00
Modify Date                     : 2016:12:19 18:32:07+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:12:19 18:32:07+08:00
Format                          : application/pdf
Title                           : Print Preview - C:\DOCUME~1\miclem\LOCALS~1\Temp\.aptcache\ae2oohow/tf2oopyn
Creator                         : miclem
Document ID                     : uuid:d4de19b3-4d40-4c4b-a3c9-7588f3d8dd98
Instance ID                     : uuid:f24e1de5-c32e-40d0-85dc-f9974496cbdb
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 122

EXIF Metadata provided by EXIF.tools