Fujitsu Client Computing WB0035 LIFEBOOK P SERIES W/ WM3B2915ABG 11ABG WLAN & BT User Manual Appendix I 2

Download:
Mirror Download [FCC.gov]
Document ID	576570
Application ID	b14Z23ZECJznV2wVvFRU1g==
Document Description	User manual part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.91kB (1811346 bits)
Date Submitted	2005-08-30 00:00:00
Date Available	2005-10-13 00:00:00
Creation Date	2005-08-29 02:46:36
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-08-29 13:07:59
Document Title	Microsoft Word - Appendix I User Manual_2.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Donna3

FCC ID: EJE-WB0035 (IC: 337J-WB0035)
Report No. M050752_Cert_WM3B2915ABG_DTS_BT
APPENDIX H
USER MANUAL (part 2)
EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia
www.emctech.com.au
P7010.book Page 53 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
Configuration of the WLAN Device
The WLAN Device can be configured to establish wireless network connectivity using one of the following
tools:
■
■
1.
Activate the WLAN device using either the Wireless
On/Off Switch or the Intel PROSet software.
Intel PROSet Software - The Intel PROSet Software
allows for multiple profile setup and supports automatic profile switching. Support for most industry
standard security solutions is contained in this software.
2.
Click the [Start] button first and then [All Programs].
3.
Click the icon [Intel PROSet Wireless] to execute
the Intel PROSet Wireless software.
Atheros Client Utility - The Atheros Client Utility software allows for multiple profile setups and supports
automatic profile switching. Support for most industry standard security solutions is contained in this
software.
4.
Click the [Add] button. The General Settings dialog
displays.
5.
Enter a profile name in the Profile Name field.
6.
Enter the network SSID, in the Network Name
(SSID) field.
7.
Click Infrastructure or Ad Hoc for the operating
mode.
8.
Click [Advanced].
9.
The Mandatory Access Point option is only used if
Infrastructure mode is selected. Use this option to
connect to a specific access point. Enter the MAC
address for the access point. Click OK to save the
setting and return to the General Settings page.
FLOW OF OPERATIONS
1.
Activate the WLAN Device (See Activating the
WLAN Device on page 52 for more information).
2.
Configure the Wireless Network parameters (See
Configure Wireless Network Parameters on page 53
for more information).
3.
Procedure
■
Enter the network name (SSID)
■
Choose the appropriate WLAN architecture (Ad
Hoc or Infrastructure)
■
Choose Authentication method: Open, Shared,
WPA-Enterprise, WPA2-Enterprise, WPAPersonal, or WPA2-Personal
■
If using static WEP keys, enter static WEP key and
choose key index.
Configure network settings (See Configure Network Parameters on page 53 for more information)
10. Click [Next].
11. If you are using Cisco CCX, click Cisco Options to
enable Cisco CKIP data encryption on the Security
Settings page. Check the Cisco Compatible Extensions Options. If you have checked the Cisco's
"Mixed-Cell" box in the Advanced Setting, this
option must also be checked.
12. Click [OK].
■
TCP/IP settings
13. Click Next.
■
Workgroup or Domain settings.
14. Select Open, Shared, WPA-Enterprise, WPA2Enterprise, WPA-Personal, or WPA2-Personal in
the Network Authentication options.
CONFIGURATION USING
INTEL PROSET SOFTWARE
This section explains the procedure to properly
configure the WLAN device using the Intel PROSet Software. Pre-defined parameters will be required for this
procedure. Please consult with your network administrator for these parameters:
15. Select either None, WEP, CKIP (if Enable Cisco Client eXtentions is enabled, use CKIP or WEP), or
TKIP for the data encryption.
16. If WEP is selected, select either 64 or 128-bit for the
Encryption Level.
Network Name - Also known as the SSID
17. Select the key index 1, 2, 3 or 4.
Network Key (WEP) - Required if using static WEP
keys.
18. Enter the WEP key if required. If your network does
not employ a 802.1x/EAP security mechanism,
please skip to step 24.
Authentication Type - Open, Shared, WPA, or WPAPSK
53
P7010.book Page 54 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
19. Click the Enable 802.1x checkbox to enable the
802.1x security option. Please contact your network
administrator if configuration of this setting is
required.
20. Select the appropriate Authentication Type. Please
contact your network administrator if configuration of this setting is required.
21. After selecting your authentication type, enter the
user name, domain, and password of the user you
have created on the authentication server. The user
name and password do not have to be the same as
name and password of your current Windows user
login.
5.
From the General page, enter a profile name in the
Profile Name field.
6.
Enter the network SSID, in the SSID1 field. If you
wish to create a profile that can connect to up to 3
different wireless networks, SSID's can be entered
in the SSID2 and SSID3 fields as well.
7.
Click the Security tab.
8.
The Security tab allows for the configuration of the
Security modes listed in the table below. Please
select the radio button of the desired security
mode. If these settings are not known to you,
please consult with your network administrator for
the correct settings.
22. Click [OK] to save the settings.
23. From the Intel ProSet Wireless page, click the new
profile name shown in the Profile List. Use the up
and down arrows to position the priority of the
new profile in the priority list.
Field Name
Description
WPA
Enables the use of Wi-Fi Protected
Access. Choosing WPA opens the
WPA EAP drop-down menu.
Options include TLS and PEAP. If
these settings are not known to you,
please consult with your network
administrator for the correct settings.
WPA-PSK
Enables WPA-Pre-Shared Key. Click
on the Configure button to enter the
WPA Passphrase. If these settings
are not known to you, please consult
with your network administrator for
the correct settings.
802.1x
Enables 802.1x security. If these
settings are not known to you,
please consult with your network
administrator for the correct settings.
Choosing this option opens the
802.1x EAP type drop-down menu.
Options include TLS, PEAP, and LEAP
Pre-Shared Key
Enables the use of pre-shared keys
that are defined on both the access
point and the station. This is where
static WEP keys are entered. Click
the Configure button to fill in the
Define Pre-Shared Keys window.
None
No security
24. Click the Connect button to connect to the network.
25. Click [Close] if you want to close the Intel(R)
PROSet for Wireless window.
CONFIGURATION USING
ATHEROS CLIENT UTILITY SOFTWARE
This section explains the procedure to properly
configure the WLAN device using the Atheros Client
Utility. Pre-defined parameters will be required for this
procedure. Please consult with your network administrator for these parameters:
Network Name - Also known as the SSID
Network Key (WEP) - Required if using static WEP
keys.
Authentication Type - Open, Shared, WPA, or WPAPSK
Procedure
1.
Activate the WLAN device using either the Wireless
On/Off Switch or the Atheros Client Utility
2.
Right-click on the “Atheros Client Utility” icon in
the system tray, and select “Open Atheros Client
Utility” from the menu.
3.
4.
54
From the Current Status page, click the Profile
Management tab.
If this is your first time using this utility, highlight
the profile [Default] and Click the [Modify] button,
otherwise Click the [New] button. The General Settings dialog displays.
9.
Click OK
10. Click the Advanced tab
11. The Advanced tab allows for the configuration of
the options detailed in the table below.
P7010.book Page 55 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
Field Name
Description
Power Save
Mode
Options are Maximum, Normal, or
Off
Network Type
Options are AP (Infrastructure) or Ad
Hoc
802.11b
Preamble
Specifies the preamble setting in
802.11b. The default setting is Short
and Long (Access Point mode),
which allows both short and long
headers in the 802.11b frames. Set
to Long Only to override allowing
short frames.
2.
If the Control Panel is in Category view, switch to
Classic view by clicking “Switch to Classic View”
under Control Panel the left frame. (If you are
already in Classic view, “Switch to Category View”
will be displayed.)
3.
Double-click [Network Connections]. A list of currently installed networks will be displayed.
4.
Right-click [Wireless Network Connection] in the
list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed.
5.
Click the [General] tab if it is not already selected.
Click [Internet Protocol (TCP/IP] and then click
[Properties]. The [Internet Protocol (TCP/IP)
Properties] window will be displayed.
Transmit Power
Level
Options are 100%, 50%, 25%,
12.5% or Lowest transmit power
(0mW)
6.
Wireless Mode
Specifies 5 GHz 54 Mbps, 5 GHz 108
Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz
54 Mbps operation in an access
point network.
7.
Wireless Mode
when Starting
Ad Hoc
Network
Specifies 5GHz 54 Mbps, 5 GHz 108
Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz
54 Mbps to start an Ad Hoc network
if no matching network name is
found after scanning all available
modes.
12. Click OK
Set the IP address as follows:
■
For ad hoc connection: Select [Use the following
IP address:] and then enter data for [IP address]
and [Subnet mask]. See page 62 for IP address
setting.
■
For access point (infrastructure) connection: If
your network uses DHCP, select [Obtain an IP
address automatically] and [Obtain DNS server
address automatically]. If your network uses static
IP addresses, consult with your network administrator for the correct IP address settings.
13. If the profile you just created does not activate
immediately, click the Profile Management tab,
highlight the desired Profile, and click Activate.
8. Click the [OK] button. Processing will return to the
[Wireless Network Connection Properties] window.
14. Click [Close] if you want to close the Atheros Client
Utility.
10. Close the [Network Connection] window.
CONNECTION TO THE NETWORK
Following this operation, confirm the names of the
computer and the workgroup as follows.
9. Click the [OK] button.
This section explains connection to the network.
If there is an administrator of the network, contact the
network administrator for data settings.
Confirming the computer and work group names
To modify the computer name and/or the
work group name, you need to be logged
in from Windows as an administrator.
Setting the network
Perform the “Setting TCP/IP” and “Confirming the
computer and work group names” operations required for
network connection.
1.
Click the [Start] button, then [Control Panel].
Setting TCP/IP
2.
If the Control Panel is in Category view, switch to
Classic view by clicking “Switch to Classic View”
under Control Panel the left frame. (If you are
already in Classic view, “Switch to Category View”
will be displayed.)
3.
Double-click the [System] icon. The [System Properties] window will be displayed.
4.
Click the [Computer Name] tab.
To change the setting of the IP address,
you need to be logged in from Windows
as an administrator.
1.
Click the [Start] button first and then [Control
Panel].
55
P7010.book Page 56 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
5.
Confirm the settings of [Full computer name:] and
[Workgroup:].
3.
Double-click [Network Connections]. A list of currently installed networks will be displayed.
a. The setting of [Full computer name:] denotes the
name for identifying the computer. Any name
can be assigned for each personal computer.
4.
Right-click [Wireless Network Connection] in the
list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed.
5.
If [File and Printer Sharing for Microsoft Networks] is displayed, proceed to step 6. If [File and
Printer Sharing for Microsoft Networks] is not displayed, skip to step 7.
Enter the desired name in less than 15 ASCII
character code format. Identifiability can be
enhanced by entering the model number, the
user name, and other factors.
6.
Make sure that the [File and Printer Sharing for
Microsoft Networks] check box is checked, and
then click the [OK] button. Skip to “Setting filesharing function”.
b. [Workgroup name] is the group name of the
network. Enter the desired name in less than 15
ASCII character code format.
7.
Click [Install]. The [Select Network Component
Type] window will be displayed.
8.
Click [Service], then click the [Add] button. The
[Select Network Service] window will be displayed.
9.
Click [File and Printer Sharing for Microsoft Networks] and then click the [OK] button. Processing
will return to the [Wireless Network Connection
Properties] window, and [File and Printer Sharing
for Microsoft Networks] will be added to the list.
To change the name, click [Change] and
then proceed in accordance with the
instruction messages displayed on the
screen.
For ad hoc connection: Assign the same network
name to all personal computers existing on the
network.
For access point (infrastructure) connection:
Assign the name of the work group to be
accessed.
6.
Click the [OK] button. If a message is displayed
that requests you to restart the personal computer,
click [Yes] to restart the computer.
Setting the sharing function
Set the sharing function to make file and/or printer sharing
with other network-connected personal computers valid.
This operation is not required unless the sharing function is to be used.
The folder and printer for which the sharing function
has been set will be usable from any personal computer
present on the network.
10. Click the [Close] button.
Setting the file-sharing function
The procedure for setting the file-sharing function
follows, with the “work” folder in drive C: as an
example.
1.
Click the [Start] button first and then [My Computer].
2.
Double-click [Local disk (C:)].
3.
Right-click the “work” folder (or whichever folder
you want to share), and then click [Sharing and
Security...] in the menu displayed. The [Folder
Name Properties] window will be displayed.
To share a file and/or the connected
printer, you need to be logged in as an
administrator.
Setting the file-sharing function for the file
which has been used to execute Network
Setup Wizard is suggested on the screen.
For the wireless LAN, however, since
security is guaranteed by entry of the
network name (SSID) and the network
key, the steps to be taken to set the filesharing function easily without using
Network Setup Wizard are given below.
Setting the Microsoft network-sharing service
1.
Click the [Start] button first and then [Control
Panel].
2.
If the Control Panel is in Category view, switch to
Classic view by clicking “Switch to Classic View”
under Control Panel the left frame. (If you are
already in Classic view, “Switch to Category View”
will be displayed.)
56
4.
Click [Sharing] if it isn’t already selected.
P7010.book Page 57 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
5.
Click the link stating “If you understand the security risks, but want to share files without running
the wizard, click here”.
6.
Click “Just enable file sharing” and click [OK].
7.
Check the [Share this folder on the network] check
box.
To specify the corresponding folder as a
read-only folder, select the [Read only]
checkbox under the General tab.
8.
Click the [OK] button. The folder will be set as a
sharable folder, and the display of the icon for the
“work.” folder will change.
Setting the printer-sharing function
1.
Click the [Start] button first and then [Printers and
FAX]. A list of connected printers will be displayed.
2.
Right-click the printer for which the sharing function is to be set, and then click [Sharing] in the
menu displayed. The property window corresponding to the selected printer will be displayed.
Setting the printer-sharing function when
Network Setup Wizard has been executed
is suggested on the screen. For the wireless
LAN, however, since security is guaranteed
by entry of the network name (SSID) and
the network key, the steps to be taken to
set the printer-sharing function without
using Network Setup Wizard are laid down
below.
3.
Click the [Sharing] tab.
4.
Click [Share this printer].
5.
Enter the sharing printer name in [Share name].
6.
Click the [OK] button.
Connecting your personal computer to another
personal computer
1.
Click [Start] first and then [My Computer]. The
[My Computer] window will be displayed in the left
frame.
2.
Click [My Network Places] in the “Other Places”
list. The window [My Network Places] will be displayed.
3.
Click [View workgroup computers] under Network
Tasks in the left frame.
4.
Double-click the personal computer to which your
personal computer is to be connected. The folder
that was specified in “Setting the file-sharing function” on page 56 will be displayed.
5.
Double-click the folder to be accessed.
Confirming the status of the radio
1.
Right-click the Intel PRO Wireless icon in the lower
right corner of the screen.
2.
Click [Open Intel PROSet for Wireless]. The Intel
PROSet for Wireless window opens.
3.
Contained within the General tab and the Details
section (accessed by pressing the [Details] button),
you will find the current operating status of the
radio. (When the radio is turned off or the computer is not yet connected, some of the conditions
will not be displayed.)
■
Profile Name
The current configuration profile is displayed.
■
Network Name (SSID)
Displays the Network Name (SSID) currently
used by the radio.
■
IP Address
The IP address of the current profile.
■
Signal Quality
Displays a message stating the current quality of
the signal.
■
Signal Strength
Displays a graphic representation of the current
signal strength.
Confirming connection
After you have finished the network setup operations,
access the folder whose sharing has been set for other
personal computers. Also, confirm the status of the radio
waves in case of trouble such as a network connection
failure.
In the case of access point (infrastructure)
connection, enter the necessary data for
the access point before confirming
connection. Refer to the manual of the
access point for the access point setup
procedure.
Additionally, in the lower section of the display, you
will see a variety of different measurements related
to the WLAN. For additional information about the
items, click on the “Help?” button:
■
Adapter MAC Address
■
Band
■
Supported Data Rates
57
P7010.book Page 58 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
58
■
Radio Frequency
■
Channel Number
■
Network Authentication
■
Data Encryption
■
802.1x Authentication Type
■
802.1x Authentication Protocol
■
CCX Version
■
CCX TPC
■
CCX Power Levels
■
Access Point MAC Address
■
Mandatory Access Point
P7010.book Page 59 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
Troubleshooting
Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the
following table.
Problem
Unavailable
network
connection
Possible Cause
Incorrect network
name (SSID) or
network key
Possible Solution
Ad hoc connection: verify that the network names (SSID’s) and network
keys (WEP) of all computers to be connected have been configured
correctly. SSID’s and WEP key values must be identical on each machine.
Access Point (Infrastructure) connection: set the network name (SSID)
and network key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access
Point. Please consult your network administrator for this value, if
necessary.
For the method of setting network authentication, refer to the following
page:·”Assigning parameters” on page 53·
Weak received signal
strength and/or link
quality
Ad hoc connection: Retry connection after shortening the distance to
the destination computer or removing any obstacles for better sight.
Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for
better sight.
To check the wave condition, refer to the following page:· “Confirming
the status of the radio waves” on page 57.
The WLAN device
has been deactivated
or disabled
Check if the wireless switch is turned ON. Also verify “Disable Radio” is
not checked in “Network setting” window. Refer to “Starting Transmission” on page 52.
The computer to be
connected is turned
off
Check if the computer to be connected is turned ON.
RF interference from
Access Points or
other wireless
networks
The use of identical or overlapping RF channels can cause interference
with the operation of the WLAN device. Change the channel of your
Access Point to a channel that does not overlap with the interfering
device.
Wireless network
authentication has
failed
Re-check your Network Authentication, Encryption, and Security
settings. Incorrectly configured security settings such as an incorrectly
typed WEP key, a mis-configured LEAP username, or an incorrectly
chosen authentication method will cause the LAN device to associate
but not authenticate to the wireless network.
Incorrectly
configured network
settings
Recheck the configuration of your network settings.
Incorrect IP address
configuration
For the method of checking, refer to the following page:·“Connection to
the Network” on page 55.
This only applies to networks using static IP addresses. Please contact
your network administrator for the correct settings.
59
P7010.book Page 60 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
Wireless LAN Glossary
Ad Hoc Mode
MAC address (Media Access Control Address)
Ad Hoc Mode refers to a wireless network architecture
where wireless network connectivity between multiple
computers is established without a central wireless
network device, typically known as Access Points.
Connectivity is accomplished using only client devices in
a peer-to-peer fashion. For details, refer to “Ad hoc
connection” on page 50.
A MAC address (also called an Ethernet address or IEEE
MAC address) is the 48-bit address (typically written as
twelve hexadecimal digits, 0 through 9 and A through F,
or as six hexadecimal numbers separated by periods or
colons, e.g., 0080002012ef, 0:80:0:2:20:ef) which
uniquely identifies a computer that has an Ethernet
interface.
Channel
MTU (Maximum Transmission Unit)
Range of narrow-band frequencies used by the WLAN
device to transmit data. IEEE802.11b/g - 11 channels, 22
MHz wide channels.
The maximum size of data which can be transmitted at
one time in networks including the Internet. In an environment whose maximum size of data is too large to
correctly receive data, normal communications can be
restored by setting the size of MTU to a smaller value.
DHCP (Dynamic Host Configuration Protocol)
A protocol that provides a means to dynamically allocate
IP addresses to computers on a local area network.
DNS (Domain Name System)
A data query service that provides a mechanism with
which to translate host names into Internet addresses.
IEEE802.11a
Wireless LAN standard that supports a maximum data
rate of 54 Mbps. 802.11a devices operate in the 5 GHz
lower and middle UNII bands.
IEEE802.11b
Wireless LAN standard that supports a maximum data
rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz
ISM band.
Access point
Network key
Data that is used for encrypting data in data communication. The personal computer uses the same network
key both for data encryption and decryption, therefore,
it is necessary to set the same network key as the other
side of communication.
Network name (SSID: Security Set Identifier)
When a wireless LAN network is configured, grouping is
performed to avoid interference or data theft. This
grouping is performed with “Network name (SSID)”. In
order to improve security, the network key is set
allowing no communication unless “Network name
(SSID)” coincides with the network key.
Open system authentication
Wireless network device used to bridge wireless and
wired network traffic.
Null authentication method specified in the 802.11 standard that performs no authentication checks on a wireless client before allowing it to associate.
IP address
PPPoE (Point to Point Protocol over Ethernet)
The logical 32-bit host address defined by the Internet
Protocol that uniquely identifies a computer on a
network. The IP address is usually expressed in dotted
decimal notation.
A method of allowing the authentication protocol
adopted in telephone line connection (PPP) to be used
over an Ethernet.
LAN (Local Area Network)
A procedure or rule of delivering data among
computers. Ordered data communication is allowed by
making all conditions required for communication
including the method of data transmission/reception
and actions upon communication errors into procedures.
A LAN or Local Area Network is a computer network (or
data communications network) which is confined to a
limited geographical area.
60
Protocol
P7010.book Page 61 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
Shared key authentication
802.11 network authentication method in which the AP
sends the client device a challenge text packet that the
client must then encrypt with the correct WEP key and
return to the AP. If the client has the wrong key or no
key, authentication will fail and the client will not be
allowed to associate with the AP. Shared key authentication is not considered secure, because a hacker who
detects both the clear-text challenge and the same challenge encrypted with a WEP key can decipher the WEP
key.
SSID (Service Set Identifier)
Service Set Identifier, a 32-character unique identifier
attached to the header of packets sent over a WLAN that
acts as a password when a mobile device tries to connect
to the BSS. The SSID differentiates one WLAN from
another, so all access points and all devices attempting to
connect to a specific WLAN must use the same SSID. A
device will not be permitted to join the BSS unless it can
provide the unique SSID. Because the SSID is broadcast
in plain text, it does not supply any security to the
network.
Subnet mask
TCP-IP network is controlled by being divided into
multiple smaller networks (subnets). IP address consists
of the subnet address and the address of each computer.
Subnet mask defines how many bits of IP address
comprise the subnet address. The same value shall be set
among computers communicating with each other.
TCP/IP (Transmission Control Protocol/Internet
Protocol)
A standard protocol of the Internet.
Wi-Fi
Wi-Fi, or Wireless Fidelity, is a set of standards for wireless local area networks (WLAN) based on the IEEE
802.11 specifications. Certified products can use the
official Wi-Fi logo, which indicates that the product is
interoperable with any other product also showing that
logo.
61
P7010.book Page 62 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
IP address information
IP addressing is much more complicated
than can be briefly explained in this
document. You are advised to consult with
your network administrator for additional
information.
If IP address is unknown, set IP address as follows:
If you have an access point (DHCP server) on the
network, set the IP address as follows:
[Obtain an IP address automatically]
A DHCP server is a server that
automatically assigns IP addresses to
computers or other devices in the network.
There is no DHCP server for the AdHoc
network.
If the IP address is already assigned to the computer in
the network, ask the network administrator to check the
IP address to be set for the computer.
If no access point is found in the network:
An IP address is expressed with four values in the range
between 1 and 255.
Set the each computer as follows: The value in parentheses is a subnet mask.

Computer A: 192.168.100.2 (255.255.255.0)
Computer B: 192.168.100.3 (255.255.255.0)
Computer C: 192.168.100.4 (255.255.255.0)
Computer X: 192.168.100.254 (255.255.255.0)
62
P7010.book Page 63 Wednesday, June 1, 2005 3:39 PM
W I r e l e s s L A N U s e r ’s G u i d e
Specifications
Item
Specification
Type of network
The Atheros AR5002X and the Intel PRO/Wireless 2915ABG
Network Connections WLAN devices conform to IEEE 802.11a
and 802.11b/g (Wi-Fi based)*.
Transfer rate
(Automatic switching)
IEEE 802.11a/g: 54 Mbps maximum data rate
IEEE 802.11b: 11 Mbps maximum data rate
Active frequency
802.11b/g: 2400~2473 MHz
802.11a: 4900 ~ 5850 MHz
Number of channels
802.11a: 8 independent channels
802.11b/g: 11 channels, 3 non-overlapping channels
Security
Encryption Types - CKIP, WEP, TKIP, AES**
WPA 1.0 compliant
Encryption Keylengths Supported: 64 bits, 128 bits, and 152 bits
(Atheros module using AES encryption only)
802.1x/EAP
Maximum recommended number of computers to
be connected over wireless LAN (during ad hoc
connection)
10 units or less ***
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of
wireless LAN (Wi-Fi Alliance) has been passed.
** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/
104 bits after subtracting the fixed length of 24 bits.
*** Depending on practical environments, the allowable number of computers to be connected may be decreased.
63
P7010.book Page 64 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Series Notebook - Section Five
Using the Bluetooth Device
The integrated Bluetooth module is an optional device
available for Fujitsu mobile computers.
WHAT IS BLUETOOTH?
Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop
computers, phones, printers, and cameras. Bluetooth
technology is used to create Personal Area Networks
(PANs) between devices in short-range of each other.
WHERE TO FIND INFORMATION
ABOUT BLUETOOTH
The Bluetooth module contains a robust Help user’s
guide to assist you in learning about operation of the
Bluetooth device.
To access the Help file, click [Start] -> All Programs, and
click on Toshiba. Select Bluetooth, then select User’s
Guide.
For additional information about Bluetooth Technology,
visit the Bluetooth Web site at: www.bluetooth.com.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. The
maximum power output is less than 20mW and meets
the exemption criteria for radiation exposure limits.
The transmitters in this device must not be co-located or
operated in conjunction with any other antenna or
transmitter.
Canadian Notice
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject
to licensing.
Warranty
Users are not authorized to modify this product. Any
modifications invalidate the warranty.
This equipment may not be modified, altered, or
changed in any way without signed written permission
from Fujitsu. Unauthorized modification will void the
equipment authorization from the FCC and Industry
Canada and the warranty.
64
P7010.book Page 65 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
65
P7010.book Page 66 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
66
P7010.book Page 67 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
Troubleshooting
Your Fujitsu LifeBook notebook is sturdy and subject to
few problems in the field. However, you may encounter
simple setup or operating problems that you can solve
on the spot, or problems with peripheral devices, that
you can solve by replacing the device. The information
in this section helps you isolate and resolve some of these
straightforward problems and identify failures that
require service.
IDENTIFYING THE PROBLEM
If you encounter a problem, go through the following
procedure before pursuing complex troubleshooting:
1. Turn off your LifeBook notebook.
2. Make sure the AC adapter is plugged into your notebook and to an active AC power source.
3. Make sure that any card installed in the PC Card slot
is seated properly. You can also remove the card
from the slot, thus eliminating it as a possible cause
of failure.
4. Make sure that any devices connected to the external
connectors are plugged in properly. You can also
disconnect such devices, thus eliminating them as
possible causes of failure.
5. Turn on your notebook. Make sure it has been off at
least 10 seconds before you turn it back on.
6. Go through the boot sequence.
7. If the problem has not been resolved, refer to the
Troubleshooting Table, that follows, for more
detailed troubleshooting information.
8. If you are still having problems after referring to the
Troubleshooting Table, go to the Fujitsu Computer
Systems Support website (http://www.computers.us
.fujitsu.com/support), and search the list of
Frequently Asked Questions (FAQs) contained
there.
If you keep notes about what you have
tried, your support representative may be
able to help you more quickly by giving
additional suggestions over the phone.
9. If you have tried the solutions suggested above
without success, contact your support
representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487)
Fax: 408-764-2724
E-mail: 8fujitsu@us.fujitsu.com
Web site:
http://www.computers.us.fujitsu.com/support
Before you place the call, you should have the following
information ready so that the customer support representative can provide you with the fastest possible solution:
■
■
■
■
■
■
■
Product name
Product configuration number
Product serial number
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
See the Configuration Label on the bottom of your
notebook for configuration and serial numbers. (See
figure 2-7 on page 11 for location)
SPECIFIC PROBLEMS
Using the Troubleshooting Table
When you have problems with your LifeBook notebook,
try to find the symptoms under the Problem column of
the troubleshooting table for the feature giving you
difficulty. You will find a description of common causes
for that symptom under the column Possible Cause and
what, if anything, you can do to correct the condition
under Possible Solutions. All possible causes or solutions
may not apply to your notebook.
67
P7010.book Page 68 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
TROUBLESHOOTING TABLE
Problem
Page
Audio Problems . . . . . . . . . . . . . . . . . . . . . . . . . . page 68
Optical Drive Problems . . . . . . . . . . . . . . . . . . . . page 68
Floppy Disk Drive Problems . . . . . . . . . . . . . . . . page 69
Hard Drive Problems . . . . . . . . . . . . . . . . . . . . . . page 69
Keyboard or Mouse Problems. . . . . . . . . . . . . . . page 69
Memory Problems . . . . . . . . . . . . . . . . . . . . . . . . page 70
Modem Problems . . . . . . . . . . . . . . . . . . . . . . . . . page 70
Problem
Problem
Page
USB Device Problems . . . . . . . . . . . . . . . . . . . . . page 70
PC Card Problems . . . . . . . . . . . . . . . . . . . . . . . . page 70
Power Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . page 71
Shutdown and Startup Problems . . . . . . . . . . . . page 72
Video Problems . . . . . . . . . . . . . . . . . . . . . . . . . . page 73
Miscellaneous Problems . . . . . . . . . . . . . . . . . . . page 74
Possible Cause
Possible Solutions
Audio Problems
There is no sound coming The software volume control is
from the built-in speakers. set too low.
Adjust the sound volume control settings in your
software, operating system and applications.
Headphones are plugged into
your notebook.
Plugging in headphones disables the built-in
speakers; remove the headphones.
BIOS audio settings are
incorrect.
Set the BIOS setup utility to the default values within
the Multimedia Device Configuration menu. (See
BIOS Setup Utility on page 25 for more information)
Software driver is not configured
correctly.
Refer to your application and operating system
documentation for help.
DVD/CD-RW Drive Problems
LifeBook notebook fails to
recognize disc in optical
drive.
Protective sheet is still in the
optical drive tray.
Remove the protective sheet from the tray.
The disc is not pushed down
onto raised center of the drive.
Open optical drive tray and re-install the disc
properly.
Optical drive tray is not latched
shut.
Push on the front of the optical drive tray until it
latches.
Incorrect DVD Player or no
Install DVD Player software. (See “Using the Optical
DVD Player software is installed. Drive Software” on page 35 for more information.)
The Optical Drive Access
indicator on the Status
Indicator Panel blinks at
regular intervals when no
disc is in the tray or the
drive is not installed.
68
Wrong drive designator was used
for optical drive in the
application.
Verify the drive designator used by the application is
the same as the one used by the operating system.
When the operating system is booted from a DVD/
CD, drive designations are automatically adjusted.
Windows auto insertion
function is disabled.
Start the optical drive from the desktop or
application software or re-enable the Windows auto
insertion function. (See Auto Insert Notification
Function on page 36 for more information)
DVD/CD disc is dirty or defective.
Wipe disc with non-abrasive cleaning cloth and
reinsert. It if still will not work try a different disc.
The Windows auto insertion
function is active and is checking
to see if a disc is ready to run.
This is normal. However, you may disable this
feature. (See Auto Insert Notification Function on
page 36 for more information)
P7010.book Page 69 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
Problem
Possible Cause
Possible Solutions
Floppy Disk Drive Problems
You cannot access your
optional floppy disk.
You tried to write to a write
protected floppy disk.
Eject the floppy disk and set it to write enable. (See
Preparing a Disk for Use on page 33 for more information)
Floppy disk is not loaded
correctly.
Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 33 for more information)
Security is set to protect access to
floppy disk data.
Verify your password and security settings.
The setup utility is incorrectly
set for your internal (Primary
Master) or optional second hard
drive (Primary Slave).
Revise BIOS settings to set both Primary Master
and Primary Slave correctly. (See BIOS Setup Utility
on page 25 for more information)
The wrong drive designator was
used by an application when a
bootable CD-ROM was used to
start the notebook.
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Security is set so your operating
system cannot be started
without a password.
Verify your password and security settings.
Hard Drive Problems
You cannot access your
hard drive.
Keyboard or Mouse Problems
The built-in keyboard
does not seem to work.
The notebook has gone into
Suspend mode.
Push the Suspend/Resume/Power On button.
Your application has locked out
your keyboard.
Try to use your integrated pointing device to restart
your system. If this fails, turn your notebook off by
pressing the Power/Suspend/Resume button for
several seconds. After the system has been off for at
least 10 seconds, turn it back on.
The characters that appear
do not match those which
you typed.
NumLk is set in the BIOS.
Go to the BIOS and make sure that NumLk is
disabled. (See BIOS Setup Utility on page 25 for more
information)
You have installed an
external keyboard or
mouse, and it does not
seem to work.
Your external device is not prop- Re-install your device. (See Device Ports on page 44
erly installed.
for more information)
You have connected an
external keyboard or a
mouse and it seems to be
locking up the system.
Your operating system software
Check your device and operating system
is not setup with the correct soft- documentation and activate the proper driver.
ware driver for that device.
Your operating system software
Check your device and operating system docuis not setup with the correct soft- mentation and activate the proper driver.
ware driver for that device.
Your system has crashed.
Try to restart your notebook. If this fails, turn your
notebook off by pressing the Power/Suspend/
Resume button for several seconds. After the system
has been off for at least 10 seconds, turn it back on.
69
P7010.book Page 70 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
Problem
Possible Cause
Possible Solutions
Memory Problems
Your Power On screen, or
Info menu of the BIOS
setup utility information,
does not show the correct
amount of installed
memory.
Your memory upgrade module
is not properly installed.
Remove and re-install your memory upgrade
module. (See Memory Upgrade Module on page 42
for more information)
You have a memory failure.
Check for Power On Self Test (POST) messages.
(See Power On Self Test Messages on page 75 for more
information)
Messages about modem operation are generated by whichever
modem application is in use.
See your application software documentation for
additional information.
The device is not properly
installed.
Remove and re-install the device. (See Device Ports
on page 44 for more information)
The device may have been
installed while an application
was running, so your notebook
is not aware of its installation.
Close the application and restart your notebook.
Your software may not have the
correct software driver active.
See your software documentation and activate the
correct driver.
You may have the wrong I/O
address selected for your device.
See your device documentation and software documentation to determine the required I/O address.
Change the settings in the BIOS setup utility. (See
BIOS Setup Utility on page 25 for more information)
Your device and another device
are assigned the same I/O
address.
Check all I/O addresses located within the BIOS
setup utility and any other installed hardware or
software to make sure there are no duplications.
The card is not properly
installed.
Remove and re-install the card. (See PC Cards on
page 37 for more information)
The card may have been installed
while an application was
running, so your notebook is not
aware of its installation.
Close the application and restart your notebook.
Your software may not have the
correct software driver active.
See your software documentation and activate the
correct driver.
You may have the wrong
I/O address selected for your PC
Card device.
See your PC Card documentation to determine
the required I/O address. Change the settings in
the BIOS. (See BIOS Setup Utility on page 25 for
more information)
Your PC Card device and
another device are assigned the
same I/O address.
Check all I/O addresses located within the BIOS
setup utility and any other installed hardware or
software to make sure there are no duplications.
Modem Problems
Messages about modem
operation.
USB Device Problems
You have installed a USB
device but your LifeBook
notebook does not recognize the device, or the
device does not seem to
work properly.
PC Card Problems
A card inserted in the PC
Card slot does not work or
is locking up the system.
70
P7010.book Page 71 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
Problem
Possible Cause
Possible Solutions
Power Failures
You turn on your
LifeBook notebook and
nothing seems to happen.
Your LifeBook notebook
turns off all by itself.
Your LifeBook notebook
will not work on battery
alone.
The installed primary battery is
completely discharged, there is
no optional second battery
installed or there is no Power
adapter installed.
Check the Status Indicator Panel to determine the
presence and condition of the batteries. (See Status
Indicator Panel on page 12 for more information)
Install a charged battery or a Power adapter.
The primary battery is installed
but is faulty.
Use the Status Indicator panel to verify the presence
and condition of the batteries. (See Status Indicator
Panel on page 12 for more information) If a battery is
indicating a short, remove that battery and operate
from another power source or replace that battery.
The battery or batteries are low.
Check the Status Indicator Panel to determine the
presence and condition of the batteries. (See Status
Indicator Panel on page 12 for more information) Use
a Power adapter to operate until a battery is charged
or install a charged battery.
The adapter (AC or auto/airline)
is not plugged in properly.
Verify that your adapter is connected correctly. (See
Power Sources on page 23 for more information)
The Power adapter (AC or auto/
airline) has no power from the
AC outlet, airplane seat jack, or
the car’s cigarette lighter.
Move the AC cord to a different outlet, check for a
line switch or tripped circuit breaker for the AC
outlet. If you are using an auto/airline adapter in a
car make sure the ignition switch is in the On or
Accessories position.
The Power adapter (AC or auto/
airline) is faulty.
Try a different Power adapter or install a charged
optional second battery.
The power management parameters are set for auto timeouts
which are too short for your
operating needs.
Press any button on the keyboard, or move the
mouse to restore operation. If that fails, push the
Suspend/Resume button. Check your power
management settings, or close your applications
and go to the Power Savings menu of the setup
utility to adjust the timeout values to better suit
your operation needs.
You are operating on battery
power only and have ignored a
low battery alarm until the
battery is at dead battery state
and your system has gone into
Dead Battery Suspend mode.
Install a power adapter and then push the Suspend/
Resume button. (See Power Sources on page 23 for
more information)
You have a battery failure.
Verify the condition of the batteries using the
Status Indicator panel, and replace or remove
any batteries that are shorted. (See Status Indicator
Panel on page 12 for more information)
Your power adapter has failed or
lost its power source.
Make sure the adapter is plugged in and the outlet
has power.
The installed batteries are dead.
Replace the battery with a charged one or install a
Power adapter.
No batteries are installed.
Install a charged battery.
71
P7010.book Page 72 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
Problem
Your LifeBook notebook
will not work on battery
alone.
(continued)
The batteries seem to
discharge too quickly.
Possible Cause
Possible Solutions
The batteries are improperly
installed.
Verify that the batteries are properly connected by
re-installing them.
Your installed batteries are
faulty.
Verify the condition of the batteries using the Status
Indicator panel and replace or remove any batteries
that are shorted. (See Status Indicator Panel on
page 12 for more information)
You are running an application
that uses a lot of power due to
frequent hard drive or DVD/
CD-RW drive access, or use of a
modem or LAN PC card.
Use both the primary battery and an optional
second battery and/or use a power adapter for this
application when at all possible.
The power savings features may
be disabled.
Check the power management and/or setup utility
settings in the Power Savings menu and adjust
according to your operating needs.
The brightness is turned all the
way up.
Turn down the brightness adjustment. The higher
the brightness the more power your display uses.
The batteries are very old.
Replace the batteries.
The batteries have been exposed
to high temperatures.
Replace the batteries.
The batteries are too hot or too
cold.
Restore the notebook to normal operating temperature. The Charging icon on the Status Indicator
panel will flash when the battery is outside its
operating range.
Shutdown and Startup Problems
The Suspend/Resume/
Power On button does not
work.
The Suspend/Resume/Power On
button is disabled from the
Advanced submenu of the Power
menu of the setup utility.
Enable the button from the setup utility.
You did not hold the button in
long enough.
Hold the button longer. This may need to be a few
seconds if your application is preventing the CPU
from checking for button pushes.
There may be a conflict with the
application software.
Close all applications and try the button again.
The system powers up,
Boot sequence settings of the
and displays power on
setup utility are not compatible
with your configuration.
information, but fails to
load the operating system.
72
Set the operating source by pressing the [F12] key
while the Fujitsu logo is on screen or use the [F2]
key and enter the setup utility and adjust the source
settings from the Boot menu. (See BIOS Setup
Utility on page 25 for more information)
You have a secured system
requiring a password to load
your operating system.
Make sure you have the right password. Enter the
setup utility and verify the Security settings and
modify them as accordingly. (See BIOS Setup Utility
on page 25 for more information)
Internal hard drive was not
detected.
Use the BIOS setup utility to try to auto detect the
internal hard drive. If this does not work, contact
Fujitsu Service and Support at 1-800-8FUJITSU.
P7010.book Page 73 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
Problem
Possible Cause
Possible Solutions
An error message is
displayed on the screen
during the notebook
(boot) sequence.
Power On Self Test (POST) has
detected a problem.
See the Power On Self Test (POST) messages to
determine the meaning and severity of the problem.
Not all messages are errors; some are simply status
indicators. (See Power On Self Test Messages on
page 75 for more information)
Your notebook appears to
change setup parameters
when you start it.
BIOS setup changes were not
saved when you made them and
exited the BIOS setup utility
returning it to previous settings.
Make sure you select Save Changes And Exit when
exiting the BIOS setup utility.
The BIOS CMOS hold-up
battery has failed.
Contact your support representative for repairs.
This is not a user serviceable part but has a normal
life of 3 to 5 years.
The notebook is set for an
external monitor only.
Pressing [F10] while holding down the [Fn] key
allows you to change your selection of where to
send your display video. Each time you press the
combination of keys you will step to the next
choice. The choices, in order are: built-in display
only, external monitor only, both built-in display
and external monitor.
The display angle and brightness
settings are not adequate for
your lighting conditions.
Move the display and the brightness control until
you have adequate visibility.
The power management timeouts may be set for very short
intervals and you failed to notice
the display come on and go off.
Press any button the keyboard, or move the mouse
to restore operation. If that fails, push the Suspend/
Resume button. (The display may be shut off by
Standby mode, Auto Suspend or Video Timeout)
The notebook is set for S-Video
display only.
While holding down the [Fn] key, click on the [F11]
key to toggle the S-Video display off.
The LifeBook notebook
turned on with a series of
beeps and your built-in
display is blank.
Power On Self Test (POST) has
detected a failure which does not
allow the display to operate.
Contact your support representative.
The display goes blank by
itself after you have been
using it.
The notebook has gone into
Video timeout, Standby mode,
Suspend mode or Hibernation
mode because you have not used
it for a period of time.
Press any button on the keyboard, or move the mouse
to restore operation. If that fails, push the Suspend/
Resume button. Check your power management
settings to adjust the timeout values to better suit
your operation needs. (See BIOS Setup Utility on
page 25 for more information)
The power management timeouts may be set for very short
intervals and you failed to notice
the display come on and go off.
Press any button on the keyboard, or move the mouse
to restore operation. If that fails, push the Suspend/
Resume button. (The display may be shut off by
Standby Mode, Auto Suspend or Video Timeout)
A foreign object, such as a paper
clip, is stuck between the display
and the keyboard.
Remove all foreign objects from the keyboard.
Video Problems
The built-in display is
blank when you turn on
your LifeBook notebook.
The Built-in Display does
not close.
73
P7010.book Page 74 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
Problem
The Built-in Display has
bright or dark spots.
Possible Cause
Possible Solutions
If the spots are very tiny and few
in number, this is normal for a
large LCD display.
This is normal; do nothing.
If the spots are numerous or
large enough to interfere with
your operation needs.
Display is faulty; contact your support representative.
The application display
uses only a portion of
your screen and is
surrounded by a dark
frame.
You are running an application
that does not support 800 x 600/
1024 x 768 pixel resolution
display and display compression
is enabled.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600/1024 x 768 pixel resolution. You can fill the
screen but have less resolution by changing your
display compression setting, (See the Video Features
submenu, located within the Advanced menu of the
BIOS. (See BIOS Setup Utility on page 25 for more
information)
The display is dark when
on battery power.
The default is set on low brightness to conserve power.
Press [Fn] + [F7] to increase brightness and adjust
Power Control under battery settings.
You have connected an
external monitor and it
does not display any
information.
Your BIOS setup is not set to
enable your external monitor.
Toggle the video destination by pressing [Fn] and
[F10] together, or check your BIOS setup and enable
your external monitor. (See the Video Features
submenu, located within the Advanced Menu of the
BIOS. (See BIOS Setup Utility on page 25 for more
information)
Your external monitor is not
properly installed.
Reinstall your device. (See External Monitor Port on
page 46 for more information)
Your operating system software
Check your device and operating system
is not setup with the correct soft- documentation and activate the proper driver.
ware driver for
that device.
You have connected an
external monitor and it
does not come on.
Your external monitor is not
compatible with your LifeBook
notebook.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section. (See Specifications on page 87
for more information)
Application software often has
its own set of error message
displays.
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.
Miscellaneous Problems
An error message is
displayed on the screen
during the operation of
an application.
74
P7010.book Page 75 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
POWER ON SELF TEST MESSAGES
The following is an alphabetic list of error-and-status
messages that the Phoenix BIOS and/or your operating
system can generate and an explanation of each message.
Error messages are marked with an *. If an error message
is displayed that is not in this list, write it down and
check your operating system documentation both on
screen and in the manual. If you can find no reference
to the message and its meaning is not clear, contact
your support representative for assistance.
nnnn Cache SRAM Passed
Where nnnn is the amount of system cache in kilobytes
success-fully tested by the Power On Self Test. (This can
only appear if you have an SRAM PC Card installed.)
*Diskette drive A error or Diskette drive B error
Drive A: or B: is present but fails the BIOS Power On Self
Test diskette tests. Check to see that the drive is defined
with the proper diskette type in the Setup Utility, (See
BIOS Setup Utility on page 25 for more information) and
that the diskette drive is installed correctly. If the disk
drive is properly defined and installed, avoid using it and
contact your support representative.
*Extended RAM Failed at offset: nnnn
Extended memory not working or not configured properly. If you have an installed memory upgrade module,
verify that the module is properly installed. If it is properly installed, you may want to check your Windows
Setup to be sure it is not using unavailable memory
until you can contact your support representative.
nnnn Extended RAM Passed
Where nnnn is the amount of memory in kilobytes
successfully tested.
*Failing Bits: nnnn The hex number nnnn
This is a map of the bits at the memory address (in
System, Extended, or Shadow memory) which failed the
memory test. Each 1 (one) in the map indicates a failed
bit. This is a serious fault that may cause you to lose data
if you continue. Contact your support representative.
*Fixed Disk x Failure or Fixed Disk Controller
Failure (where x = 1-4)
The fixed disk is not working or not configured properly.
This may mean that the hard drive type identified in
your setup utility does not agree with the type detected
by the Power On Self Test. Run the setup utility to check
for the hard drive type settings and correct them if
necessary. If the settings are OK and the message appears
when you restart the system, there may be a serious fault
which might cause you to lose data if you continue.
Contact your support representative.
*Incorrect Drive A type – run SETUP
Type of floppy drive A: not correctly identified in Setup.
This means that the floppy disk drive type identified in
your setup utility does not agree with the type detected
by the Power On Self Test. Run the setup utility to
correct the inconsistency.
*Incorrect Drive B type – run SETUP
Type of floppy drive B: not correctly identified in Setup.
This means that the floppy disk drive type identified in
your setup utility does not agree with the type detected
by the Power On Self Test. Run the setup utility to
correct the inconsistency.
*Invalid NVRAM media type
Problem with NVRAM access. In the unlikely case that
you see this message you may have some display problems. You can continue operating but should contact
your support representative for more information.
*Keyboard controller error
The keyboard controller test failed. You may have to
replace your keyboard or keyboard controller but may
be able to use an external keyboard until then. Contact
your support representative.
*Keyboard error
Keyboard not working. You may have to replace your
keyboard or keyboard controller but may be able to
use an external keyboard until then. Contact your
support representative.
*Keyboard error nn
BIOS discovered a stuck key and displays the scan code
for the stuck key. You may have to replace your keyboard
but may be able to use an external keyboard until then.
Contact your support representative.
*Monitor type does not match CMOS – Run SETUP
Monitor type not correctly identified in Setup. This error
probably means your BIOS is corrupted, run the setup
utility and set all settings to the default conditions. If you
still get this error, contact your support representative.
*Operating system not found
Operating system cannot be located on either drive A: or
drive C: Enter the setup utility and see if both the fixed
disk, and drive A: are properly identified and that the
boot sequence is set correctly. Unless you have changed
your installation greatly, the operating system should be
on drive C:. If the setup utility is correctly set, your hard
drive may be corrupted and your system may have to be
re-installed from your back up media.
*Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts
to locate the address and display it on the screen. If it
cannot locate the address, it displays ????. This is a
potentially data destroying failure. Contact your
support representative.
75
P7010.book Page 76 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
*Parity Check 2 nnnn
Parity error found in the I/O bus. BIOS attempts to
locate the address and display it on the screen. If it
cannot locate the address, it displays ????. This is a
potentially data-destroying failure. Contact your
support representative.
*Press  to resume,  to SETUP
Displayed after any recoverable error message. Press
the [F1] key to continue the boot process or the [F2]
key to enter Setup and change any settings.
*Previous boot incomplete –
Default configuration used
Previous Power On Self Test did not complete successfully. The Power On Self Test will load default values and
offer to run Setup. If the previous failure was caused by
incorrect values and they are not corrected, the next
boot will likely fail also. If using the default settings does
not allow you to complete a successful boot sequence,
you should turn off the power and contact your support
representative.
*Real time clock error
Real-time clock fails BIOS test. May require board repair.
Contact your support representative.
*Shadow RAM Failed at offset: nnnn
Shadow RAM failed at offset nnnn of the 64k block at
which the error was detected. You are risking data corruption if you continue. Contact your support representative.
nnnn Shadow RAM Passed
Where nnnn is the amount of shadow RAM in kilobytes
successfully tested.
*System battery is dead – Replace and run SETUP
The BIOS CMOS RAM memory hold up battery is dead.
This is part of your BIOS and is a board mounted
battery which requires a support representative to
change. You can continue operating but you will have to
use setup utility default values or reconfigure your setup
utility every time you turn off your notebook. This
battery has an expected life of 2 to 3 years.
nnnn System RAM Passed
Where nnnn is the amount of system memory in
kilobytes successfully tested.
*System timer error
The timer test failed. The main clock that operates the
computer is faulty. Requires repair of system board.
Contact your support representative for repairs.
UMB upper limit segment address: nnnn
Displays the address of the upper limit of Upper
Memory Blocks, indicating released segments of the
BIOS memory which may be reclaimed by a virtual
memory manager.
Video BIOS shadowed
Video BIOS successfully copied to shadow RAM.
EMERGENCY DVD TRAY RELEASE
If for some reason the eject button fails, you can open
the DVD/CD-RW tray with a paper clip or similar tool
inserted into the eject hole in the far right side of the
front of the tray. Straighten one side of a paper clip
and push it gently into the hole. The tray will pop out
a short distance.
MODEM RESULT CODES
The operating system and application software that is
factory installed detects the modem characteristics and
provides the necessary command strings to operate the
modem. The internal modem operation is controlled by
generic AT commands from the operating system and
application software. The standard long form result
codes may, in some cases, be displayed on your screen to
keep you informed of the actions of your modem. The
operating system and application software may suppress
display of the result codes.
Examples of result codes are:
■
■
■
■
System BIOS shadowed
System BIOS copied to shadow RAM.
*System CMOS checksum bad – run SETUP
BIOS CMOS RAM has been corrupted or modified
incorrectly, perhaps by an application program that
changes data stored in BIOS memory. Run Setup and
reconfigure the system.
*System RAM Failed at offset: nnnn
System memory failed at offset nnnn of in the 64k block
at which the error was detected. This means that there is
a fault in your built-in memory. If you continue to
operate, you risk corrupting your data. Contact your
support representative for repairs.
76
■
■
■
■
■
OK
NO CARRIER
NO DIALTONE
CONNECT 53000 (Connection complete
at 53,000 bps.)
ERROR
FAX
RING (This means an incoming call.)
BUSY
NO ANSWER
When using the internal modem with applications
that are not factory installed refer to the
application documentation.
P7010.book Page 77 Wednesday, June 1, 2005 3:39 PM
Troubleshooting
Restoring Your
Pre-installed Software
6. After the components are installed, click [OK], then
click [Yes] when asked if you want to reboot the
system.
The Drivers and Applications Restore (DAR) CD
contains sets of device drivers and Fujitsu utilities (in
specific directories) that are unique to your notebook
configuration for use as documented below.
RESTORING THE FACTORY IMAGE
If you have access to the internet, visit the
Fujitsu Support web site at http://
www.computers.us.fujitsu.com/support to
check for the most current information,
drivers and hints on how to perform
recovery and system updates. (See
Automatically Downloading Driver
Updates on page 78 for more information)
Re-Installing Individual Drivers and Applications
The Drivers and Applications CD can be used to selectively re-install drivers and/or applications that may have
been un-installed or corrupted.
There may be certain free third-party
applications pre-installed on your system
that are not on the DAR CD. The latest
versions of the applications can be
downloaded from the third-party’s website.
To re-install drivers and/or applications:
1. Boot up the system and insert the DAR CD after
Windows has started. A Fujitsu Installer screen is
displayed after the CD is inserted.
2. After reading the License Agreement, click [I agree].
3. A window will appear containing a list of applications, drivers, and utilities that you can install from
the Drivers and Applications CD.
The components listed are color-coded in
terms of their install status. Blue indicates
that the component can be installed. Green
indicates that the component needs to be
installed separately. Grey indicates a
component that is already installed; grey
items can be reinstalled, but prior to
installation you will receive a reminder that
the component is already installed.
4. In the list, check off all the components you want to
install. If you want to install all components, click
[Select All]. Clicking [Select All] will select all of the
blue-coded components; you must select grey and
green components separately.
5. Once you have selected the components you wish to
install, click [Install Selected Subsystems]; the
components will be installed.
The Restore Disc that came with your system contains
two utilities:
■
■
The Recovery utility allows you to restore the original
contents of the C: drive.
The Hard Disk Data Delete utility on this disc is used
to delete all data on your hard disk and prevent it from
being reused. Do not use the Hard Disk Data Delete
utility unless you are absolutely certain that you want
to erase your entire hard disk, including all partitions.
• The use of this disc requires that you
have a device capable of reading DVDs
attached to your system. If you do not
have a built-in DVD player, you will need
to attach an external player. For more
information on available external devices,
visit our Web site at: us.fujitsu.com/
computers.
• This disc can only be used with the
system with which it was purchased.
BOOT Priority Change
Before restoring an image, you must first verify that your
system is set up to boot from the DVD drive. To verify/
change the boot-up priority (rather than booting-up
from the hard drive or an external floppy disk drive),
perform the following steps:
1. Start your system and press the [F2] key when the
Fujitsu logo appears. You will enter the BIOS Setup
Utility.
2. Using the arrow keys, go to the Boot menu.
3. Arrow down to the Boot Device Priority submenu.
Press [Enter].
4. If “Optical Media Drive” or “CD-ROM Drive” is not
at the top of the list, arrow down to the drive in the
list, and press the space bar (or the + key) to move it
to the top of the list. (The system attempts to boot
from the devices in the order in which they are
listed.). Note that the BIOS for some systems will
indicate “CD-ROM Drive”, even when a DVD drive
is connected.
5. If you have an external DVD drive connected,
proceed to step 6; otherwise, proceed to step 7.
6. If you have an external DVD drive connected:
• Select the Advanced menu in the BIOS window.
• Scroll down to the USB Features submenu and
press the Enter key to open it.
77
P7010.book Page 78 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Six
• If Legacy USB Support is disabled, press the space
bar to enable it.
AUTOMATICALLY DOWNLOADING
DRIVER UPDATES
• Scroll down to SCSI SubClass Support and press
the space bar to enable it.
Your system has a convenient tool called the Fujitsu
Driver Update (FDU) utility. With FDU, you can choose
to automatically or manually go to the Fujitsu site to
check for new updates for your system.
7. Press [F10], then click on [Yes] to exit the BIOS
Setup Utility and return to the boot process.
After you have changed the boot priority, you can restore
a backup image when you are booting up.
Procedure
1.
Turn on the power to your system.
2.
Ensure that you have a device that can read DVDs
either installed in your system or attached externally to it.
3.
Insert the Restore Disc into the drive tray.
4.
Reboot your system.
5.
After the system reboots, follow the instructions
that appear to either restore your system image or
erase all data from your hard disk.
78
The FDU icon
should appear in the system tray at
the bottom right of your screen (roll the cursor over the
icons to find the correct one). If the FDU icon does not
appear in the system tray, it can be started by going to
[Start] -> All Programs, and clicking on Fujitsu Driver
Update; this will create the icon automatically.
To invoke the FDU menu, right-click on the FDU icon.
The menu contains the following items:
■
Check for updates now
Allows for manual driver update search. The first
time it is used, you are prompted to agree to a user
agreement. After clicking on the icon, the FDU automatically connects with the Fujitsu site to check for
updates and downloads them. While downloading,
the icon has a red bar through it, indicating that it
cannot be used while the download is in process.
When the update is complete, a message appears
informing you of the fact.
■
Enable Automatic Update Notifications
Automatically searches for new updates on a regular
basis (approximately every 3 days).
■
Show update history
Brings up a screen that displays a history of updates
that have been made via the FDU.
■
About Fujitsu Driver Update
Displays the FDU version number and copyright
information
■
Fujitsu Driver Update Readme
Displays the FDU readme.
P7010.book Page 79 Wednesday, June 1, 2005 3:39 PM
Care and Maintenance
79
P7010.book Page 80 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Seven
80
P7010.book Page 81 Wednesday, June 1, 2005 3:39 PM
Care and Maintenance
Care and Maintenance
If you use your Fujitsu LifeBook notebook carefully, you
will increase its life and reliability. This section provides
some tips for looking after the notebook and its devices.
Electrical equipment may be hazardous if
misused. Operations of this product or similar products, must always be supervised by
an adult. Do not allow children access to
the interior of any electrical products and
do not permit them to handle any cables.
Caring for your LifeBook notebook
■ Your LifeBook notebook is a durable but sensitive electronic device. Treat it with respect and care.
■
Make a habit of transporting it in a suitable carrying
case.
■
Do not attempt to service the computer yourself.
Always follow installation instructions closely.
■
To protect your notebook from damage and to optimize system performance, be sure to keep all air all
vents unobstructed, clean, and clear of debris. This
may require periodic cleaning, depending upon the
environment in which the system is used.
■
Keep the computer away from food and beverages.
■
If you accidentally spill liquid on your LifeBook notebook:
1. Turn it off.
2. Position it so that the liquid can run out.
3. Let it dry out for 24 hours, or longer if needed.
4. If your notebook will not boot after it has dried
out, call your support representative.
■
Do not use your Fujitsu LifeBook notebook in a wet
environment (near a bathtub, swimming pool).
■
Always use the AC adapter and batteries that are
approved for your notebook.
■
Avoid exposure to sand, dust and other
environmental hazards.
■
Do not expose your notebook to direct sunlight for long
periods of time as temperatures above 140° F (60° C)
may damage your notebook.
■
Keep the covers closed on the connectors and slots when
they are not in use.
■
Do not put heavy or sharp objects on the computer.
■
If you are carrying your LifeBook notebook in a briefcase, or any other carrying case, make sure that there are
no objects in the case pressing on the lid.
■
Never position your notebook such that the DVD/CDRW drive is supporting the weight of the notebook.
■
Do not drop your notebook.
■
Do not touch the screen with any sharp objects.
Cleaning your LifeBook notebook
■ Always disconnect the power plug. (Pull the plug, not
the cord.)
■
Clean your LifeBook notebook with a damp, lint-free
cloth. Do not use abrasives or solvents.
■
Use a soft cloth to remove dust from the screen.
Never use glass cleaners.
Storing your LifeBook notebook
■ If storing your notebook for a month or longer, turn
your LifeBook notebook off, charge the battery, then
remove and store all Lithium ion batteries.
■
Store your notebook and batteries separately. If you
store your LifeBook with a battery installed, the battery
will discharge, and battery life will be reduced. In addition, a faulty battery might damage your LifeBook.
■
Store your Fujitsu LifeBook in a cool, dry location.
Temperatures should remain between 13ºF (-10ºC) and
140ºF (60ºC).
Traveling with your LifeBook notebook
■
Do not transport your notebook while it is turned on.
■
Do not check your notebook as baggage. Carry it with
you.
■
Always bring your backup disk and Drivers and
Applications CD that came with your notebook when
you travel. If you experience system software problems
while traveling, you may need it to correct any problems.
■
Never put your notebook through a metal detector.
Have your notebook hand-inspected by security personnel. You can however, put your notebook through a
properly tuned X-ray machine. To avoid problems,
place your notebook close to the entrance of the
machine and remove it as soon as possible or have your
notebook hand-inspected by security personnel. Security officials may require you to turn your notebook
On. Make sure you have a charged battery on hand.
■
When traveling with the hard drive removed, wrap the
drive in a non-conducting materials (cloth or paper). If
you have the drive checked by hand, be ready to install
the drive if needed. Never put your hard drive through a
metal detector. Have your hard drive hand-inspected by
security personnel. You can however, put your hard
drive through a properly tuned X-ray machine.
■
Take the necessary plug adapters if you're traveling overseas. Check the following diagram to determine which
plug adapter you'll need or ask your travel agent.
81
P7010.book Page 82 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Seven
Outlet Type
■
Put your notebook in Suspend mode when it is turned
on and you are not actually using it.
■
Limit your media drive access.
■
Disable the DVD/CD-RW Combo Drive auto insert notification function.
■
Always use fully charged batteries.
■
Eject PCMCIATM cards when not in use.
Location
United States, Canada,
parts of Latin America,
Mexico, Japan, Korea,
the Philippines, Taiwan
Russia and the Commonwealth
of Independent States (CIS),
most of Europe, parts of Latin
America, the Middle East, parts
of Africa, Hong Kong, India,
most of South Asia
United Kingdom, Ireland,
Malaysia, Singapore,
parts of Africa
FLOPPY DISKS AND DRIVES
Caring for your Floppy Disks
■
Avoid using the floppy disks in damp and
dusty locations.
■
Never store a floppy disk near a magnet or magnetic
field.
■
Do not use a pencil or an eraser on a disk or disk label.
■
Avoid storing the floppy disks in extremely hot or cold
locations, or in locations subject to severe temperature
changes. Store at temperatures between 50º F (10ºC)
and 125ºF (52ºC).
■
Do not touch the exposed part of the disk
behind the metal shutter.
China, Australia,
New Zealand
BATTERIES
Caring for your Batteries
■
Always handle batteries carefully.
■
Do not short-circuit the battery terminals (that is, do
not touch both terminals with a metal object). Do not
carry lose batteries in a pocket or purse where they may
mix with coins, keys, or other metal objects. Doing so
may cause an explosion or fire.
■
Do not drop, puncture, disassemble, mutilate or incinerate the battery.
■
Recharge batteries only as described in this manual and
only in ventilated areas.
■
■
Do not leave batteries in hot locations for more than a
day or two. Intense heat can shorten battery life.
Do not leave a battery in storage for longer than 6
months without recharging it.
Increasing Battery Life
■ Power your LifeBook notebook through the AC or
optional auto/airline adapter whenever possible.
■
If your notebook is running on battery power all day,
connect it to the AC adapter overnight to recharge the
battery.
■
Keep brightness to the lowest level comfortable.
■
Set the power management for maximum battery life.
82
Caring for your Floppy Disk Drive
■
To clean, wipe the floppy disk drive clean with a dry soft
cloth, or with a soft cloth dampened with water or a
solution of neutral detergent. Never use benzene, paint
thinner or other volatile material.
■
Avoid storing the floppy disk drive in extremely hot or
cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50º F (10º
C) and 125ºF (52º C).
■
Keep the floppy disk drive out of direct sunlight and
away from heating equipment.
■
Avoid storing the floppy disk drive in locations subject
to shock and vibration.
■
Never use the floppy disk drive with any liquid, metal,
or other foreign matter inside the floppy disk
drive or disk.
■
Never disassemble or dismantle your floppy disk drive.
P7010.book Page 83 Wednesday, June 1, 2005 3:39 PM
Care and Maintenance
MEDIA CARE
PC CARDS
Caring for your Media Discs
Media discs are precision devices and will function reliably if given reasonable care.
Caring for your PC Cards
PC Cards are durable, but you must treat them with
care. The documentation supplied with your PC Card
will provide specific information, but you should pay
attention to the following points:
■
Always store your media disc in its case when it is not in
use.
■
Always handle discs by the edges and avoid touching the
surface.
■
Avoid storing any media discs in extreme temperatures.
■
Do not bend media discs or set heavy objects on them.
■
■
To keep out dust and dirt, store PC Cards in their
protective sleeves when they are not installed in your
LifeBook notebook.
■
Avoid prolonged exposure to direct sunlight or
excessive heat.
Do not spill liquids on media discs.
■
Keep the cards dry.
■
Do not scratch media discs.
■
■
Do not get dust on media discs.
Do not flex or bend the cards, and do not place heavy
objects on top of them.
■
■
Never write on the label surface with a ballpoint pen or
pencil. Always use a felt pen.
Do not force cards into the slot.
■
Avoid dropping cards, or subjecting them to
excessive vibration.
■
If a media disc is subjected to a sudden change in temperature, cold to warm condensation may form on the
surface. Wipe the moisture off with a clean, soft, lint
free cloth and let it dry at room temperature. DO NOT
use a hair dryer or heater to dry media discs.
■
If a disc is dirty, use only a DVD/CD cleaner or wipe it
with a clean, soft, lint free cloth starting from the inner
edge and wiping to the outer edge.
Caring for your Optical Drive
Your optical drive is durable but you must treat it with
care. Please pay attention to the following points:
■
The drive rotates the compact disc at a very high speed.
Do not carry it around or subject it to shock or
vibration with the power on.
■
Avoid using or storing the drive where it will be exposed
to extreme temperatures.
■
Avoid using or storing the drive where it is damp or
dusty.
■
Avoid using or storing the drive near magnets or devices
that generate strong magnetic fields.
■
Avoid using or storing the drive where it will be subjected to shock or vibration.
■
Do not disassemble or dismantle the DVD/CD-RW
drive.
■
Occasional use of a commercially available lens cleaner
kit is recommended to maintain your drive.
83
P7010.book Page 84 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Seven
84
P7010.book Page 85 Wednesday, June 1, 2005 3:39 PM
Specifications
85
P7010.book Page 86 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Eight
86
P7010.book Page 87 Wednesday, June 1, 2005 3:39 PM
Specifications
Specifications
CONFIGURATION LABEL
This section provides the hardware and environmental
specifications for your Fujitsu LifeBook notebook.
Specifications of particular configurations will vary.
Part Number
The configuration label located on the bottom of your
LifeBook notebook (See figure 2-7 on page 11 for location)
contains information regarding the options you’ve chosen
for your notebook. Following is an example label and
information on how to read your own configuration label.
Configuration ID
Configuration P/N: AWPXXXXXXXXXXXXX
FPC P/N: FPCMXXXXXX
P7010, PM ULV 733, 10.6 WXGA, 256M, 60G, MODEM/LAN/WLAN, WIN XPH
Model #
Hard Drive
Processor
Screen Size
Communications
Memory
Operating
System
Figure 8-1 Configuration Label
MICROPROCESSOR
AUDIO
Intel® Pentium® M Processor ULV 753 (1.2 GHz, 2 MB
L2 Cache, 400 MHz Front Side Bus), or,
■
■
■
Intel® Pentium® M Processor ULV 373 (1.0 GHz, 512
KB L2 Cache, 400 MHz Front Side Bus)
For the processor speed of your LifeBook notebook,
check the configuration label.
■
■
■
MEMORY
System Memory
■
256 MB minimum, 1 GB maximum, micro-DIMM
DDR SDRAM
■
Two micro-DIMM slots
■
256 MB and 512 MB memory modules are available
BIOS Memory
1 MB Firmware Hub (FWH) Flash ROM
VIDEO
Built-in color 10.6” Wide XGA Crystal View TFT active
matrix LCD display with simultaneous display capability.
Intel® 855GME (in systems with Intel Pentium M
Processor) or 852GML (in systems with Intel Celeron
Processor) video graphics chip with integrated 32-bit
3D/2D gfx core and Accelerated Graphics Port (AGP)
support.
Up to 64 MB shared video memory using Dynamic
Video Memory Technology 2.0.
Video Color and Resolution
10.6" TFT Wide XGA
■
Internal: 1280 x 768 pixel resolution, 16M colors
■ External: 1600 x 1200 pixel resolution, 16M colors
Simultaneous Video: 1024 x 768, 16M colors, XGA,
SVGA and VGA compatible
Realtek ALC203 codec with 18-bit stereo audio
Stereo headphone/Optical Digital (SPDIF) port
Mono microphone jack, 100 mVrms max.
Dolby Headphone signal processing utility (in the
InterVideo DVD software)
Two built-in stereo speakers, 25 mm x 14 mm, bass
reflex
Built-in microphone on palm rest
MASS STORAGE DEVICE OPTIONS
Hard Drive
40 GB, 60 GB, 80 GB, or 100 GB fixed hard drive, 2.5”,
ATA 100
Modular DVD/CD-RW Combo Drive
8x DVD / 10x CD-RW / 24x CD-R / 24x CD-ROM
Modular Dual-Layer Multi-Format DVD Writer
2.4x DVD+R DL, 4x DVD-R, 2x DVD-RW, 4x DVD+R,
2.4x DVD+RW, 2x DVD-RAM, 8x DVD-ROM, 24x CDR, 10x CD-RW, 24x CD-ROM
FEATURES
Communications
■
Modem: Internal V.90 standard 56K fax/modem
(ITU V.90, 56K data, 14.4K fax)
■
LAN: 10/100 Base-TX Ethernet
■ Integrated Intel PRO/Wireless 2915ABG Network
Connections (802.11a+b/g*) with Antenna On/Off
switch (available in LifeBook P7010 model), or,
■
Integrated Atheros Super AG Wireless LAN (802.11a/
b/g*) with Antenna On/Off switch (available in LifeBook P7010D model)
■ Optional Bluetooth device for wireless personal area
network communication
* Operates at 2.4 GHz and 5.0 GHz; communications range may
vary, depending upon environment.
87
P7010.book Page 88 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Eight
Integrated Pointing Device
Touchpad pointing device with scroll button. (Scroll
button is replaced with optional fingerprint sensor* in
some configurations.)
Power Management
Conforms to ACPI (Advanced Configuration and Power
Interface)
* Optional Fingerprint Sensor: AuthenTec fingerprint slide
sensor (AES2501)
Overall Dimensions
Approximately 10.28"(w) x 7.83"(d) x 1.26/1.43"(h)
(261mm x 199 mm x 32/36 mm)
Theft Prevention Lock Slot
Slot for use with physical restraining security systems.
DEVICE PORTS
■
■
■
■
■
■
■
■
■
■
■
PC Card slot for one Type II card: PCMCIA Standard
2.1 with CardBus support
One connector for external monitor
(see Display specifications)
One Compact Flash Card slot
One SD/Memory Stick slot
Two USB 2.0 connectors for input/output devices
One S-Video Out port
One modular modem (RJ-11) connector
One LAN (RJ-45) port
One IEEE 1394 port
One stereo headphone/Optical Digital (SPDIF) jack.
(See Audio specifications)
One mono microphone jack. (See Audio specifications)
KEYBOARD
Built-in keyboard with all functions of 101 key
keyboards.
■
Total number of keys: 82
■
Function keys: [F1] through [F12]
■
Feature extension key: [Fn]
■
Two Windows keys: one Start and one application key
■
Key pitch: 17.5 mm
■
Key stroke: 2 mm
■
Built-in Touchpad pointing device with left and right
buttons and scroll button.
■
Built-in palm rest
External Keyboard Support
USB-compatible
External Mouse Support
USB-compatible
POWER
Batteries
■ One standard 6-cell high-capacity Lithium ion battery,
rechargeable, 10.8V, 4800 mAh. (Approximate charge
time: system off: 6.5 hours, system running: 17 hours)
■
Optional second bay battery: 6-cell Lithium ion
battery, rechargeable, 10.8V, 2300 mAh
AC Adapter
Autosensing 100-240V AC, 60W, supplying 16V DC,
3.75A to the LifeBook notebook, which includes an
AC cable.
88
DIMENSIONS AND WEIGHT
Weights
Approximately 3.28 lbs (1.50 kg) with standard high
capacity battery and DVD/CD-RW combo drive
ENVIRONMENTAL REQUIREMENTS
Temperature
Operating: 41° to 95° F (5° to 35° C)
Non-operating: 13° to 140° F (–10° to 60° C)
Humidity
Operating: 20% to 85%, relative, non-condensing
Non-operating; 8% to 85%, relative, non-condensing
Altitude
Operating: 10,000 feet (3,048 m) maximum
POPULAR ACCESSORIES
For ordering or additional information on Fujitsu
accessories please visit our Web site at:
us.fujitsu.com/computers or call 1-877-372-3473.
P7010.book Page 89 Wednesday, June 1, 2005 3:39 PM
Specifications
PRE-INSTALLED SOFTWARE
Depending on your pre-installed operating system, your
Fujitsu LifeBook notebook comes with pre-installed
software for playing audio and video files of various
formats. In addition there is file transfer software, virus
protection software and Power Management software.
LEARNING ABOUT YOUR
APPLICATION SOFTWARE
MS Works
Microsoft Works is a suite of software containing the
basic tools to write letters and reports, track family and
friends with address books, manage home finances, and
create a home inventory.
Depending upon your system configuration, one of the
following applications will be installed on your notebook:
Tutorials
All operating systems and most application software
have tutorials built into them upon installation. We
highly recommend that you step through the tutorial
before you use an application.
Microsoft Works 8.0
Microsoft Works 8.0 is a suite of software containing the
basic tools to write letters and reports, track family and
friends with address books, manage home finances, and
create a home inventory.
Manuals
Included with your notebook you will find manuals for
your installed operating system and other pre-installed
software. Any manuals that are not included, are available online through the help system of the software. We
recommend that you review these manuals for general
information on the use of these applications.
Microsoft Office SBE
(On Microsoft Windows XP Professional models only)
Microsoft Small Business Edition (SBE) is a suite of
applications designed to help run a small business while
increasing productivity. Among the programs included
in Microsoft SBE are Microsoft Word, Excel, and PowerPoint.
Adobe Acrobat Reader
The Adobe Acrobat Reader allows you to view, navigate,
and print PDF files from across all of the major
computing platforms.
Norton AntiVirus 2005
Your system is preinstalled with a free 90-day trial
version of Symantec’s Norton AntiVirus™ 2005. Norton
AntiVirus is a program designed to protect your LifeBook notebook from computer viruses. It assists in the
protection of the data currently residing on your hard
disk from destruction or contamination. The 90-day
trial version is activated upon your acceptance of software license agreement. After 90 days, it will be necessary to purchase a subscription from Symantec to
download latest virus definitions.
(See your online help or manual for more information on
how and when to run this program).
Fujitsu HotKey Utility
Utility for adjusting the brightness level on your
LifeBook notebook.
Fujitsu Driver Update
The Fujitsu Driver Update (FDU) utility allows you to
choose to automatically or manually go to the Fujitsu
site to check for new updates for your system.
Quicken 2005 New User Edition
Quicken 2005 New User Edition by Intuit is a personal
money management program. It has features such as
portfolio management, account registries, on-line
banking and bill paying. This application is for new
users who are using Quicken software for the first time.
Full version upgrade information is available on line.
89
P7010.book Page 90 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Eight
90
P7010.book Page 91 Wednesday, June 1, 2005 3:39 PM
Regulatory Information
Regulatory Information
NOTICE
Changes or modifications not expressly approved by
Fujitsu could void this user’s authority to operate the
equipment.
FCC NOTICES
Notice to Users of Radios and Television
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet that is on a
different circuit than the receiver.
Consult the dealer or an experienced radio/TV
technician for help.
Shielded interconnect cables must be employed with this
equipment to ensure compliance with the pertinent RF
emission limits governing this device.
Notice to Users of the US Telephone Network
This equipment (Ambit T60M283.00 Modem) complies
with Part 68 of the FCC rules, and the requirements
adopted by ACTA. On the bottom of this equipment is a
label that contains, among other information, the FCC
registration number and ringer equivalence number
(REN) for this equipment; or a product identifier in the
format US:AAAEQ##TXXXX. If requested, this information or number must be provided to the telephone
company.
This equipment is designed to be connected to the telephone network or premises wiring using a standard jack
type USOC RJ11C. A plug and jack used to connect this
equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided
with this product. It is designed to be connected to a
compatible modular jack that is also compliant.
The ringer equivalent number (REN) of this equipment
is 0.6B as shown on the label. The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone may
result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company.
If this equipment causes harm to the telephone network,
the telephone company will notify you in advance that
temporary discontinuance of service may be required.
But if advance notice isn’t practical, the telephone
company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
effect the operation of the equipment. If this happens
the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair
or warranty information, please refer to the manual or
contact Fujitsu Computer Systems Corporation,
Customer Service. If the equipment is causing harm to
the telephone network, the telephone company may
request that you disconnect the equipment until the
problem is resolved.
The equipment cannot be used on public coin service
provided by the telephone company. Connection to
party line service is subject to state tariffs. (Contact the
state public utility commission, public service commission or corporation commission for information).
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this computer does not disable your alarm equipment. If you have any questions about what will disable
alarm equipment, consult your telephone company or a
qualified installer.
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device to send any message via a telephone fax
machine unless such message clearly contains in a
margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date an time it
is sent and an identification of the business or other
entity, or other individual sending the message and the
telephone number of the sending machine or such business, other entity, or individual.
91
P7010.book Page 92 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook - Section Eight
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of
Canadian Interference-Causing Equipment Regulations.
CET appareil numérique de la class B respecte toutes les
exigence du Réglement sur le matérial brouilleur du
Canada.
Notice to Users of the Canadian Telephone Network
NOTICE: This equipment (Ambit T60M283.00
Modem) meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed
by the registration number. The abbreviation, IC, before
the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that Industry Canada technical specifications
were met. It does not imply that Industry Canada
approved the equipment.
Before connecting this equipment to a telephone line
the user should ensure that it is permissible to connect
this equipment to the local telecommunication facilities.
The user should be aware that compliance with the
certification standards does not prevent service
degradation in some situations.
Repairs to telecommunication equipment should be
made by a Canadian authorized maintenance facility.
Any repairs or alterations not expressly approved by
Fujitsu or any equipment failures may give the telecommunication company cause to request the user to
disconnect the equipment from the telephone line.
NOTICE: The Ringer Equivalence Number (REN) for
this terminal equipment is 0.6. The REN assigned to
each terminal equipment provides an indication of the
maximum number of terminals allowed to be connected
to a telephone interface. The termination on an interface
may consist of any combination of devices subject only
to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
For safety, users should ensure that the
electrical ground of the power utility, the
telephone lines and the metallic water
pipes are connected together. Users should
NOT attempt to make such connections
themselves but should contact the appropriate electric inspection authority or electrician. This may be particularly important
in rural areas.
92
Avis Aux Utilisateurs Du Réseau
Téléphonique Canadien
AVIS: Le présent matériel (FMD MBH7MD33 Modem)
est conforme aux spécifications techniques d’Industrie
Canada applicables au matériel terminal. Cette conformité est confirmée par le numéro d’enregistrement. Le
sigle IC, placé devant le numéro d’enregistrement,
signifie que l’enregistrement s’est effectué conformément à une déclaration de conformité et indique que les
spécifications techniques d’Industrie Canada ont été
respectées. Il n’implique pas qu’Industrie Canada a
approuvé le matériel.
Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifier s’il est permis de
connecter cet équipement aux installations de télécommunications locales. L’utilisateur est averti que même la
conformité aux normes de certification ne peut dans
certains cas empêcher la dégradation du service.
Les réparations de l’équipement de télécommunications
doivent être eVectuées par un service de maintenance
agréé au Canada. Toute réparation ou modification, qui
n’est pas expressément approuvée par Fujitsu, ou toute
défaillance de l’équipement peut entraîner la compagnie
de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
AVIS: L’indice d’équivalence de la sonnerie (IES) du
présent matériel est de 0.6. L’IES assigné à chaque
dispositif terminal indique le nombre maximal de
terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d’une interface peut
consister en une combinaison quelconque de dispositifs,
à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
Pour assurer la sécurité, les utilisateurs
doivent vérifier que la prise de terre du service d’électricité, les lignes télphoniques et
les conduites d’eau métalliques sont connectées ensemble. Les utilisateurs NE
doivent PAS tenter d’établir ces connexions eux-mêmes, mais doivent contacter
les services d’inspection d’installations
électriques appropriés ou un électricien.
Ceci peut être particulièrement important
en régions rurales.
P7010.book Page 93 Wednesday, June 1, 2005 3:39 PM
Glossary
93
P7010.book Page 94 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Nine
94
P7010.book Page 95 Wednesday, June 1, 2005 3:39 PM
Glossary
Glossary
AC Adapter
A device which converts the AC voltage from a wall
outlet to the DC voltage needed to power your LifeBook
notebook.
ACPI
Advanced Configuration and Power Interface. An
industry specification for the efficient handling of power
consumption in mobile computers. ACPI determines
how a computer's BIOS, operating system, and peripherals communicate with each other about power
management.
Active-Matrix Display
A type of technology for making flat-panel displays
which has a transistor or similar device for every pixel
on the screen.
ADSL
Asymmetric Digital Subscriber Line. Technology for
transporting high bit-rate services over ordinary phone
lines.
APM
Advanced Power Management.
Auto/Airline Adapter
A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to
the DC voltage needed to power your LifeBook notebook.
BIOS
Basic Input-Output System. A program and set of
default parameters stored in ROM which tests and
operates your LifeBook notebook when you turn it on
until it loads your installed operating system from disk.
Information from the BIOS is transferred to the installed
operating system to provide it with information on
the configuration and status of the hardware.
Bit
An abbreviation for binary digit. A single piece of
information which is either a one (1) or a zero (0).
bps
An abbreviation for bits per second. Used to describe
data transfer rates.
Boot
To start-up a computer and load its operating system
from disk, ROM or other storage media into RAM.
Bus
An electrical circuit which passes data between the CPU
and the sub-assemblies inside your LifeBook notebook.
Byte
8 bits of parallel binary information.
Cache Memory
A block of memory built into the micro-processor which
is much faster to access than your system RAM and used
in specially structured ways to make your overall data
handling time faster.
CardBus
A faster, 32-bit version of the PC Card interface
which offers performance similar to the 32-bit
PCI architecture.
CD-ROM
Compact disc read only memory. This is a form of
digital data storage which is read optically with a laser
rather than a magnetic head. A typical CD-ROM can
contain about 600MB of data and is not subject to heads
crashing into the surface and destroying the data when
there is a failure nor to wear from reading.
CMS
Code Morphing Software. Crusoe processor software
architecture that results in longer battery life. For more
information on CMS, click on the Technology link on
the refer to the Transmeta web site at: www.transmeta.com.
Command
An instruction which you give your operating system.
Example: run a particular application or format a floppy
disk.
Configuration
The combination of hardware and software that makes
up your system and how it is allocated for use.
Data
The information a system stores and processes.
DC
Direct current. A voltage or current that does not
fluctuate periodically with time.
Default Value
A pre programmed value to be used if you fail to
set your own.
DIMM
Dual-in-line memory module.
Disk
A spinning platter of magnetic data storage media. If the
platter is very stiff it is a hard drive, if it is highly flexible
it is a floppy disk, if it is a floppy disk in a hard housing
with a shutter it is commonly called a diskette.
95
P7010.book Page 96 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Nine
Disk Drive
The hardware which spins the disk and has the heads
and control circuitry for reading and writing the data
on the disk.
Diskette
A floppy disk in a hard housing with a shutter.
DMA
Direct Memory Access. Special circuitry for memory
to memory transfers of data which do not require
CPU action.
DMI
Desktop Management Interface. A standard that
provides PC management applications with a common
method of locally or remotely querying and configuring
PC computer systems, hardware and software components, and peripherals.
DOS
Disk Operating System (MS-DOS is a Microsoft Disk
Operating System).
Driver
A computer program which converts application and
operating system commands to external devices into the
exact form required by a specific brand and model of
device in order to produce the desired results from that
particular equipment.
ESD
Electro-Static Discharge. The sudden discharge of electricity from a static charge which has built-up slowly.
Example: the shock you get from a doorknob on a dry day
or the sparks you get from brushing hair on a dry day.
Extended Memory
All memory more than the 640KB recognized by
MS-DOS as system memory.
FCC
Federal Communication Commission.
Floppy Disk
A spinning platter of magnetic data storage media which
is highly flexible.
I/O
Input/Output. Data entering and leaving your LifeBook
notebook in electronic form.
I/O Port
The connector and associated control circuits for data
entering and leaving your LifeBook notebook in electronic form.
IDE
Intelligent Drive Electronics. A type of control interface
for a hard drive which is inside the hard drive unit.
IEEE 1394
The IEEE 1394 (also known as “Firewire” or “iLink”)
standard allows you to connect devices that are
compliant with IEEE standard 1394. This port is effectively a very fast communications port. This architecture
is very good for transferring large files, such as those
from digital cameras.
IRQ
Interrupt Request. An acronym for the hardware signal
to the CPU that an external event has occurred which
needs to be processed.
KB
Kilobyte.
LAN
Local Area Network. An interconnection of computers
and peripherals within a single limited geographic
location which can pass programs and data amongst
themselves.
LCD
Liquid Crystal Display. A type of display which makes
images by controlling the orientation of crystals in a
crystalline liquid.
Lithium ion Battery
A type of rechargeable battery which has a high powertime life for its size and is not subject to the memory
effect as Nickel Cadmium batteries.
MB
Megabyte.
GB
Gigabyte.
Megahertz
1,000,000 cycles per second.
Hard drive
A spinning platter of magnetic data storage media where
the platter is very stiff.
Memory
A repository for data and applications which is readily
accessible to your LifeBook notebook CPU.
Hexadecimal
A decimal notation for the value of a 4 bit binary
number. (0-9, A, B, C, D, E, F) Example: 2F in
hexadecimal = 00101111 in binary = 47 in decimal.
MHz
Megahertz.
96
P7010.book Page 97 Wednesday, June 1, 2005 3:39 PM
Glossary
Modem
A contraction for MOdulator-DEModulator. The
equipment which connects a computer or other data
terminal to a communication line.
PPPoE
Point to Point Protocol over Ethernet. A protocol for
Ethernet, using a Point-to-Point Protocol (PPP), which
is used for connection on the phone line.
Monaural
A system using one channel to process sound
from all sources.
Program
An integrated set of coded commands to your
computers telling your hardware what to do and how
and when to do it.
NTSC
National TV Standards Commission. The standard for
TV broadcast and reception for the USA.
Operating System
A group of control programs that convert application
commands, including driver programs, into the exact
form required by a specific brand and model of microprocessor in order to produce the desired results from
that particular equipment.
Partition
A block of space on a hard drive which is set aside
and made to appear to the operating system as if it
were a separate disk, and addressed by the operating
system accordingly.
PCMCIA
PCMCIA is a trademark of the Personal Computer
Memory Card International Association. The Personal
Computer Memory Card International Association is an
organization that sets standards for add-in cards for
personal computers.
Peripheral Device
A piece of equipment which performs a specific
function associated with but not integral to a computer.
Examples: a printer, a modem, a CD-ROM.
Pitch (keyboard)
The distance between the centers of the letter keys
of a keyboard.
Pixel
The smallest element of a display, a dot of color on your
display screen. The more pixels per area the clearer your
image will appear.
POP3
Post Office Protocol. Protocol that is used to retrieve
email from a mail server.
POST
Power On Self Test. A program which is part of the BIOS
which checks the configuration and operating condition
of your hardware whenever power is applied to your
LifeBook notebook. Status and error messages may be
displayed before the operating system is loaded. If the
self test detects failures that are so serious that operation
can not continue, the operating system will not be
loaded.
PS/2
A series of personal computers which established a
number of standards for connecting external devices
such as keyboards and monitors.
RAM
Random Access Memory. A hardware component of
your LifeBook notebook that holds binary information
(both program and data) as long as it has the proper
power applied to it.
RAM Module
A printed circuit card with memory and associated
circuitry which allows the user to add additional
memory to the computer without special tools.
Reset
The act of reloading the operating system. A reset erases
all information stored in RAM.
Restart
See Reset.
Resume
To proceed after interruption. In your LifeBook notebook, this refers to returning to active operation after
having been in one of the suspension states.
ROM
Read Only Memory. A form of memory in which information is stored by physically altering the material. Data
stored in this way can not be changed by your LifeBook
notebook and does not require power to maintain it.
SDRAM
Synchronous Dynamic Random Access Memory.
Shadow RAM
A technique of copying data or applications stored in
ROM (Read Only Memory) into RAM (Random Access
Memory) for access during actual operation. RAM is
much faster to access than ROM, however ROM
contents are not lost when power is removed.
Shadowing allows permanently stored information
to be rapidly accessed.
SPDIF
Sony Philips Digital Interface. Technology that allows
you to download digital audio data onto a MiniDisc
recorder.
97
P7010.book Page 98 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Section Nine
SSID
Service Set Identifier. Specifies which network you are
joining. Some systems allow you to specify any SSID as
an option so you can join any network.
mice, modems, and scanners. USB 1.1 has a transfer
speed of a maximum of 12Mb/s. USB 2.0 is much faster,
transferring at up to 480Mb/s. USB 2.0 is backwardcompatible to work with USB 1.1 devices.
Status Indicator
A display which reports the condition of some portion
of your hardware. On your LifeBook notebook this is an
LCD screen just above the keyboard.
VGA
Video Graphics Array. A video display standard which
provides resolutions of 720 x 400.
Stereo (audio)
A system using two channels to process sound from two
different sources.
Stroke (keyboard)
The amount of travel of a key when it is pressed from
resting to fully depressed.
Suspend
To make inoperative for a period of time. Your LifeBook
notebook uses various suspension states to reduce power
consumption and prolong the charge of your battery.
SVGA
Super VGA. Standard that provides 800x600 pixel
resolution and a palette of 16M colors.
S-Video
Super Video. A component video system for driving a
TV or computer monitor.
System Clock
An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted to
provide time of day and date.
TFT
Thin Film Transistor. A technology for flat display
panels which uses a thin film matrix of transistors to
control each pixel of the display screen individually.
UL
Underwriters Laboratories – An independent organization that tests and certifies the electrical safety of devices.
USB
Universal Serial Bus. An external bus standard that
allows for fast data transfer. A single USB port can be
used to connect up to 127 peripheral devices, such as
98
VRAM
Video Random Access Memory. A memory dedicated to
video display data and control.
WEP
Wired Equivalent Privacy. WEP is a protocol for
increasing privacy over wireless LANs. The protocol
works by encrypting data while being transmitted over
radio waves.
WFM
Wired for Management is Intel’s broad-based initiative
to reduce the total cost of ownership (TCO) of business
computing without sacrificing power and flexibility.
Wi-Fi Compatible
Wi-Fi (Wireless Fidelity) identifies that the product has
passed the interoperability test, supplied by the WECA
(Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of wireless IEEE 802.11 LAN
products. For more information on the Wi-Fi standard,
go to the WECA website at: www.wirelessethernet.com.
Write Protect
Prevent alteration of the binary state of all bits in a
storage media. Example: all information on a device
such as a floppy diskette; a block of space in a storage
media such as a partition of a hard drive; a file or directory of floppy diskette or hard drive.
XGA
Extended graphics array. Standard that provides
resolutions of 640x480 or 1024x764, supporting 64k
colors.
P7010.book Page 99 Wednesday, June 1, 2005 3:39 PM
Appendix A
Using the
Fingerprint Sensor*
* Optional Device
99
P7010.book Page 100 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Appendix
100
P7010.book Page 101 Wednesday, June 1, 2005 3:39 PM
Using the Fingerprint Sensor
Fingerprint Sensor Device
INTRODUCING THE OPTIONAL
FINGERPRINT SENSOR DEVICE
Your system may have an optional fingerprint sensor
device in the location at which other models have a
scroll button. (Figure 1)
GETTING STARTED
This section guides you through the preparation of your
system for the OmniPass fingerprint recognition
application. You will be led through the OmniPass
installation process. You will also be led through the
procedure of enrolling your first user into OmniPass.
INSTALLING OMNIPASS
If OmniPass has already been installed on your system,
skip this section and go directly to “User Enrollment” on
page 102. You can determine whether OmniPass has
already been installed by checking to see if the following
are present:
■
■
Figure A-1 Fingerprint sensor
Although the system may have a
fingerprint sensor in place of a scroll
button, the fingerprint sensor can be used
for scrolling. Simply move your fingerprint
over the sensor the same as you would use
a scroll button.
With a fingerprint sensor, you can avoid having to enter
a username and password every time you want to:
■
Log onto Windows
■
Recover from suspend mode
■
Cancel a password-protected screen saver
■
Log into homepages that require a username and password
After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the
sensor for the system recognize you.
The fingerprint sensor uses Softex OmniPass which
provides password management capabilities to
Microsoft Windows operating systems. OmniPass
enables you to use a "master password" for all Windows,
applications, and on-line passwords.
OmniPass requires users to authenticate themselves
using the fingerprint sensor before granting access to the
Windows desktop. This device results in a secure
authentication system for restricting access to your
computer, applications, web sites, and other passwordprotected resources.
OmniPass presents a convenient graphical user interface,
through which you can securely manage passwords,
users, and multiple identities for each user.
The presence of the gold key-shaped OmniPass icon in
the system tray at the bottom right of the screen.
The presence of the Softex program group in the
Programs group of the Start menu
System Requirements
The OmniPass application requires space on your hard
drive; it also requires specific Operating Systems (OS’s).
The minimum requirements are as follows:
■
■
Windows XP Home Edition or Windows XP Professional operating system
At least 35 MB available hard disk space
Installing the OmniPass Application
If OmniPass is already installed on your system, go to
“User Enrollment” on page 102. Otherwise continue
with this section on software installation.
For installation, OmniPass requires that the
user installing OmniPass have
administrative privileges to the system. If
your current user does not have
administrative privileges, log out and then
log in with an administrator user before
proceeding with OmniPass installation.
To install OmniPass on your system you must:
1. Insert the installation media for the OmniPass application into the appropriate drive. If you are
installing from CD-ROM or DVD-ROM, you must
find and launch the OmniPass installation program
(setup.exe) from the media.
2. Follow the directions provided in the OmniPass
installation program. Specify a location to which
you would like OmniPass installed. It is recommended that you NOT install OmniPass in the root
directory (e.g. C:\).
3. Once OmniPass has completed installation you will
be prompted to restart you system. Once your
system has rebooted you will be able to use
OmniPass. If you choose not to restart immediately
after installation, OmniPass will not be available for
use until the next reboot.
101
P7010.book Page 102 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Appendix
The installation program automatically places an icon
(Softex OmniPass) in the Windows Control Panel as well
as a golden key shaped icon in the taskbar.
network resources, you often have to supply credentials
to gain access. This can result in dozens of sets of credentials that you have to remember.
Verifying Information about OmniPass
After you have completed installing OmniPass and
restarted your system, you may wish to check the version
of OmniPass on your system.
During OmniPass user enrollment a "master password”
is created for the enrolled user. This master password
“replaces” all other passwords for sites you register with
OmniPass.
To check the version information of OmniPass:
Example: A user, John, installs OmniPass on his system
(his home computer) and enrolls an OmniPass user with
username “John_01” and password “freq14”. He then
goes to his webmail site to log onto his account. He
inputs his webmail credentials as usual (username
“John_02” and password “lifebook”), but instead of
clicking [Submit], he directs OmniPass to Remember
Password. Now whenever he returns to that site,
OmniPass will prompt him to supply access credentials.
1. From the Windows Desktop, double-click the keyshaped OmniPass icon in the taskbar (usually
located in the lower right corner of the screen),
or,
Click the Start button, select Settings, and click
Control Panel (if you are using Windows XP you
will see the Control Panel directly in the Start menu;
click it, then click Switch to Classic View). Doubleclick Softex OmniPass in the Control Panel, and the
OmniPass Control Center will appear. If it does not
appear, then the program is not properly installed,
or,
Click the Start button, select Programs, and from
the submenu select the Softex program group, from
that submenu click OmniPass Control Center.
2. Select the About tab at the top of the OmniPass
Control Panel. The About tab window appears with
version information about OmniPass.
Uninstalling OmniPass
For uninstallation, OmniPass requires that
the user uninstalling OmniPass have
administrative privileges to the system. If
your current user does not have
administrative privileges, log out and then
log in with an administrator user before
proceeding with OmniPass uninstallation.
To remove the OmniPass application from your system:
1. Click Start on the Windows taskbar. Select Settings,
and then Control Panel.
2. Double-click Add/Remove Programs.
3. Select OmniPass, and then click Change/Remove.
4. Follow the directions to uninstall the OmniPass
application.
5. Once OmniPass has finished uninstalling, reboot
your system when prompted.
USER ENROLLMENT
Before you can use any OmniPass features you must first
enroll a user into OmniPass.
Master Password Concept
Computer resources are often protected with passwords.
Whether you are logging into your computer, accessing
your email, e-banking, paying bills online, or accessing
102
John enters his OmniPass user credentials (“John_01”
and “freq14”) in the OmniPass authentication prompt,
and he is allowed into his webmail account. He can do
this with as many web sites or password protected
resources he likes, and he will gain access to all those
sites with his OmniPass user credentials (“John_01” and
“freq14”). This is assuming he is accessing those sites
with the system onto which he enrolled his OmniPass
user. OmniPass does not actually change the credentials
of the password protected resource. If John were to go to
an Internet cafe to access his webmail, he would need to
enter his original webmail credentials (“John_02” and
“lifebook”) to gain access. If he attempts his OmniPass
user credentials on a system other than where he
enrolled that OmniPass user, he will not gain access.
The enrollment procedure assumes you
have no hardware authentication devices
or alternate storage locations that you
wish to integrate with OmniPass. If you
desire such functionality, consult the
appropriate sections of this document.
Basic Enrollment
The Enrollment Wizard will guide you through the
process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard
will launch on Windows login. If you do not see the
Enrollment Wizard, you can bring it up by clicking Start
on the Windows taskbar; select Programs; select Softex;
click OmniPass Enrollment Wizard.
1. Click Enroll to proceed to username and password
verification. By default, the OmniPass Enrollment
Wizard enters the credentials of the currently logged
in Windows user.
2. Enter the password you use to log in to Windows.
This will become the “master password” for this
OmniPass user. In most cases, the Domain: value
P7010.book Page 103 Wednesday, June 1, 2005 3:39 PM
Using the Fingerprint Sensor
will be your Windows computer name. In a corporate environment, or when accessing corporate
resources, the Domain: may not be your Windows
computer name. Click [Next] to continue.
3. In this step OmniPass captures your fingerprint.
Refer to “Enrolling a Fingerprint” on page 103 for
additional information.
4. Next, choose how OmniPass notifies you of various
events. We recommend you keep Taskbar Tips on
Beginner mode taskbar tips and Audio Tips on at
least Prompt with system beeps only until you get
accustomed to how OmniPass operates. Click [Next]
to proceed with user enrollment. You will then see a
Congratulations screen indicating your completion
of user enrollment.
5. Click [Done] to exit the OmniPass Enrollment
Wizard. You will be asked if you’d like to log in to
OmniPass with your newly enrolled user; click [Yes].
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your
system and streamline the authentication procedure.
You enroll fingerprints in the OmniPass Control Center.
With an OmniPass user logged in, double-click the
system tray OmniPass icon. Select the User Settings tab
and click Enrollment under the User Settings area. Click
Enroll Authentication Device and authenticate at the
authentication prompt to start device enrollment.
1. During initial user enrollment, you will be
prompted to select the finger you wish to enroll.
Fingers that have already been enrolled will be
marked by a green check. The finger you select to
enroll at this time will be marked by a red arrow.
OmniPass will allow you re-enroll a finger. If you
choose a finger that has already been enrolled and
continue enrollment, OmniPass will enroll the
fingerprint, overwriting the old fingerprint. Select a
finger to enroll and click [Next].
2. It is now time for OmniPass to capture your selected
fingerprint. It may take a several capture attempts
before OmniPass acquires your fingerprint. Should
OmniPass fail to acquire your fingerprint, or if the
capture screen times out, click [Back] to restart the
fingerprint enrollment process.
Your system has a “swipe” fingerprint sensor. A
swipe sensor is small and resembles a skinny elongated rectangle. To capture a fingerprint, gently
swipe or pull your fingertip over the sensor (starting
at the second knuckle) towards yourself. Swiping
too fast or too slow will result in a failed capture.
The Choose Finger screen has a [Practice] button;
click it to practice capturing your fingerprint. When
you are comfortable with how your fingerprint is
captured, proceed to enroll a finger.
3. Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically appear. To verify your enrolled fingerprint,
place your fingertip on the sensor and hold it there
as if you were having a fingerprint captured.
Successful fingerprint verification will show a green
fingerprint in the capture window and the text Verification Successful under the capture window.
USING OMNIPASS
You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentications.
Password Replacement
You will often use the password replacement function.
When you go to a restricted access website (e.g., your
bank, your web-based email, online auction or payment
sites), you are always prompted to enter your login
credentials. OmniPass can detect these prompts and you
can teach OmniPass your login credentials. The next
time you go to that website, you can authenticate with
your fingerprint to gain access.
OmniPass Authentication Toolbar
After installing OmniPass and restarting, you will notice
a dialog you have not seen before at Windows Logon.
This is the OmniPass Authentication Toolbar, and it is
displayed whenever the OmniPass authentication system
is invoked. The OmniPass authentication system may be
invoked frequently: during Windows Logon, during
OmniPass Logon, when unlocking your workstation,
when resuming from standby or hibernate, when
unlocking a password-enabled screensaver, during password replacement for remembered site or application
logins, and more. When you see this toolbar, OmniPass
is prompting you to authenticate.
The Logon Authentication window indicates what
OmniPass-restricted function you are attempting. The
icons in the lower left (fingerprint and key) show what
authentication methods are available to you. Selected
authentication methods are highlighted while unselected
methods are not. When you click the icon for an unselected authentication method, the authentication
prompt associated with that method is displayed.
When prompted to authenticate, you must supply the
appropriate credentials: an enrolled finger for the fingerprint capture window or your master password for the
master password prompt (the key icon).
Remembering a Password
OmniPass can remember any application, GUI, or password protected resource that has a password prompt.
Using the following procedure, you can store a set of
credentials into OmniPass. These credentials will then be
linked to your “master password” or fingerprint.
103
P7010.book Page 104 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Appendix
Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt,
enter your username and password in the prompted
fields, but do not enter the site (do not hit [Enter],
[Submit], [OK], or Login). Right-click the OmniPass
system tray icon and select Remember Password from
the submenu. The Windows arrow cursor will change to
a golden key OmniPass cursor. Click this OmniPass
cursor in the login prompt area, but do not click the
[Login] or [Submit] button.
Associating a Friendly Name
After clicking the OmniPass key cursor near the login
prompt, OmniPass will prompt you to enter a “friendly
name” for this site. You should enter something that
reminds you of the website, the company, or the service
you are logging into. In its secure database, OmniPass
associates this friendly name with this website.
Additional Settings for Remembering a Site
When OmniPass prompts you to enter a “friendly name”
you also have the opportunity to set how OmniPass
authenticates you to this site. There are three effective
settings for how OmniPass handles a remembered site.
The default setting is Automatically click the “OK” or
“Submit” button for this password protected site once
the user is authenticated. With this setting, each time
you navigate to this site OmniPass will prompt you for
your master password or fingerprint authentication
device. Once you have authenticated with OmniPass,
you will automatically be logged into the site.
Less secure is the option to Automatically enter this
password protected site when it is activated. Do not
prompt for authentication. Check the upper box to get
this setting, and each time you navigate to this site
OmniPass will log you into the site without prompting
you to authenticate.
This setting is more convenient in that
whenever you go to a site remembered
with this setting, you will bypass any
authentication procedure and gain instant
access to the site. But should you leave
your system unattended with your
OmniPass user logged in, anyone using
your system can browse to your password
protected sites and gain automatic access.
If you uncheck both boxes in Settings for this Password
Site, OmniPass will prompt you for your master password or fingerprint authentication device. Once you
have authenticated with OmniPass your credentials will
be filled in to the site login prompt, but you will have to
click the website [OK], [Submit], or [Login] button to
gain access to the site.
104
Click Finish to complete the remember password procedure. The site location, the credentials to access the site,
and the OmniPass authentication settings for the site are
now stored in the OmniPass secure database. The
OmniPass authentication settings (Settings for this Password Site) can always be changed in Vault Management.
Logging in to a Remembered Site
Whether or not OmniPass prompts you to authenticate
when you return to a remembered site is determined by
Settings for this Password Site and can be changed in
Vault Management.
The following cases are applicable to using OmniPass to
login to: Windows, remembered web sites, and all other
password protected resources.
With Master Password
Once you return to a site you have remembered with
OmniPass, you may be presented with a master password prompt. Enter your master password and you will
be allowed into the site.
Logging into Windows with a Fingerprint Device
When logging into Windows with a fingerprint device,
the fingerprint capture window will now appear next to
the Windows Login screen. Place your enrolled fingertip
on the sensor to authenticate. You will be simultaneously
logged into Windows and OmniPass. The capture
window will also appear if you have used Ctrl-Alt-Del to
lock a system, and the fingerprint device can be used to
log back in as stated above.
If a machine is locked and OmniPass
detects a different user logging back in
with a fingerprint, the first user will be
logged out and the second user logged in.
In Windows XP, your login options must be set either for
classic login, or for fast user switching and logon screen
to be enabled to use your fingerprint to log on to
Windows. To change this go to Control Panel, select
User Accounts and then click Change the way users log
on or off. If your Windows screensaver is password
protected, the fingerprint capture window will now
appear next to screensaver password dialog during
resume. You can authenticate to your screensaver password prompt with your enrolled finger.
Password Management
OmniPass provides an interface that lets you manage
your passwords. To access this GUI, double-click the
OmniPass key in the system tray. Click Vault Management; you will be prompted to authenticate. Once you
gain access to Vault Management, click Manage Passwords under Vault Settings. You will see the Manage
Passwords interface, with a list of friendly names.
P7010.book Page 105 Wednesday, June 1, 2005 3:39 PM
Using the Fingerprint Sensor
You can view the credentials stored for any remembered
website by highlighting the desired resource under Password Protected Dialog and clicking Unmask Values.
Should a password be reset, or an account expire, you
can remove stored credentials from OmniPass. Highlight
the desired resource under Password Protected Dialog
and click Delete Page. You will be prompted to confirm
the password deletion.
The two check boxes in Manage Passwords govern
whether OmniPass prompts you to authenticate or
directly logs you into the remembered site.
OmniPass will overwrite an old set of credentials for a
website if you attempt to use Remember Password on an
already remembered site.
The exception to the above rule is the resetting of your
Windows password. If your password is reset in
Windows, then the next time you login to Windows,
OmniPass will detect the password change and prompt
you to “Update” or “Reconfirm” your password with
OmniPass. Enter your new Windows password in the
prompt(s) and click OK and your OmniPass "master
password" will still be your Windows password.
OmniPass User Identities
Identities allow OmniPass users to have multiple
accounts to the same site (e.g., bob@biblomail.com and
boballen@biblomail.com). If OmniPass did not provide
you identities, you would be limited to remembering
one account per site.
To create and manage identities, double-click the
OmniPass key in the system tray. Click Vault Management; OmniPass will prompt you to authenticate. Once
you gain access to Vault Management, click Manage
Identities under Vault Settings. You can only manage
the identities of the currently logged in OmniPass user
To add a new identity, click New Identity or double-click
Click here to add a new identity. Name the new identity
and click [OK], then click [Apply]. You can now switch
to the new identity and start remembering passwords.
To delete an identity, highlight the identity you want to
delete and click [Delete Identity], then click [Apply].
When you delete an identity, all of its
associated remembered sites and password
protected dialogs are lost.
To set the default identity, highlight the identity you
want as default and click [Set as Default]; click [Apply]
to ensure the settings are saved. If you log in to
OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that
OmniPass user. You can choose the identity with which
you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your username in the User Name: field. Press [Tab] and see that
the Domain: field self-populates. Click the Password:
field to bring the cursor to it, and you will see the pulldown menu in the Identity: field. Select the identity you
wish to login as and then click OK to login.
Switch User Identity
To switch identities at any time, right-click the
OmniPass system tray icon and click Switch User Identity from the submenu. The Switch Identity dialog will
appear. Select the desired identity and then click OK.
Identities and Password Management
On the Manage Passwords interface of the Vault
Management tab of the OmniPass Control Center, there
is a pull-down selection box labeled, Identity. This field
lets you choose which identity you are managing passwords for. When you select an identity here, only those
password protected dialogs that are associated with that
identity are shown. You can perform all the functions
explained in “Password Management” on page 104.
CONFIGURING OMNIPASS
This section gives an overview of both the Export/
Import function and the OmniPass Control Center.
Exporting and Importing Users
Using the OmniPass Control Center, you can export and
import users in and out of OmniPass. The export
process backs up all remembered sites, credentials, and
any enrolled fingerprints for an OmniPass user. All
OmniPass data for a user is backed up to a single
encrypted database file. During the import process, the
Windows login of the exported user is required. If the
proper credentials cannot be supplied, the user profile
will not be imported.
■
■
You should periodically export your user
profile and store it in a safe place. If
anything happens to your system, you
can import your OmniPass profile to a
new system and have all your remembered settings and fingerprints instantly.
You don't forget the Windows login
credentials when exporting. When you
examine the importation, you are
prompted for authentication. The
credentials that will allow a user profile
to be imported are the Windows login
credentials of the exported user. They
are the credentials that had to be
submitted when the user profile was
exported. You will need User Name,
Password, and Domain.
105
P7010.book Page 106 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Appendix
Exporting an OmniPass User Profile
To export a user, open the OmniPass Control Center,
and click Import/Export User under Manage Users.
Click Exports an OmniPass user profile. OmniPass will
prompt you to authenticate. Upon successfully authentication, you must name the OmniPass user profile and
decide where to save it. An .opi file is generated, and you
should store a copy of it in a safe place.
This .opi file contains all your user specific OmniPass
data, and it is both encrypted and password protected.
This user profile does NOT contain any of your
encrypted data files.
Importing an OmniPass User Profile
You cannot import a user into OmniPass if
there already is a user with the same name
enrolled in OmniPass.
To import an OmniPass user open the OmniPass
Control Center, and click Import/Export User under
Manage Users. Click Imports a new user into OmniPass
and then select OmniPass Import/Export File (*.opi)
and click Next. OmniPass will then prompt you to
browse for the file you had previously exported (.opi
file). When you select the .opi file for importation,
OmniPass will prompt you for authentication. The
credentials that will allow a user profile to be imported
are the Windows login credentials of the exported user.
They are the credentials that had to be submitted when
the user profile was exported. You will need User Name,
Password, and Domain. If you don’t remember the value
for Domain, in a PC or SOHO environment Domain
should be your computer name.
OmniPass will notify you if the user was successfully
imported.
Things to Know Regarding Import/Export
Assume you export a local Windows User profile from
OmniPass. You want to import that profile to another
machine that has OmniPass. Before you can import
the profile, a Windows user with the same login credentials must be created on the machine importing the
profile.
■
If you export an OmniPass-only user, you can import
that user to any computer running OmniPass, provided that a user with that name is not already
enrolled in OmniPass.
■
If you attempt to import a user profile who has the
same name as a user already enrolled in OmniPass, the
OmniPass import function will fail.
OMNIPASS CONTROL CENTER
This section will serve to explain functions within the
OmniPass Control Center that weren’t explained earlier.
You can access the OmniPass Control Center any of
three ways:
■
Double-click the golden OmniPass key shaped icon in
the Windows taskbar (typically in the lower-right corner of the desktop)
■
Click the Start button; select the Programs group;
select the Softex program group; and click the
OmniPass Control Center selection.
■
Open the Windows Control Panel (accessible via Start
button --> Settings --> Control Panel) and doubleclick the Softex OmniPass icon.
User Management
The User Management tab has two major interfaces:
Add/Remove User and Import/Export User. Import/
Export User functionality is documented in “Exporting
and Importing Users” on page 105. Add/Remove User
functionality is straightforward.
If you click Adds a new user to OmniPass you will start
the OmniPass Enrollment Wizard. The Enrollment
Wizard is documented in “User Enrollment” on
page 102.
If you click Removes a user from OmniPass, OmniPass
will prompt you to authenticate. Authenticate with the
credentials (or enrolled fingerprint) of the user you wish
to remove. OmniPass will prompt you to confirm user
removal. Click OK to complete user removal.
■
Example: I have a Windows user with the username
“Tom” and the password “Sunshine” on my system. I
have enrolled Tom into OmniPass and remembered
passwords. I want to take all my passwords to new system. I export Tom’s OmniPass user profile. I go to my
new system and using the Control Panel I create a user
with the username "Tom" and the password "Sunshine". I can now successfully import the OmniPass
user data to the new system.
106
Removing a user will automatically destroy
all OmniPass data associated with that
user. All identities and credentials
associated with the user will be lost.
If you are sure about removing the user,
we recommend you export the user
profile.
User Settings
The User Settings tab has four interfaces: Audio Settings,
Taskbar Tips, and Enrollment. User settings allow users
to customize OmniPass to suit their individual preferences. Under User Settings (Audio Settings and Taskbar
Tips) you can set how OmniPass notifies the user of
OmniPass events (e.g., successful login, access denied,
P7010.book Page 107 Wednesday, June 1, 2005 3:39 PM
Using the Fingerprint Sensor
etc.). The details of each setting under the Audio
Settings and Taskbar Tips interfaces are self-explanatory.
The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll and authentication
device refer to Chapter 2.3. To enroll additional fingerprints, click Enroll Authentication Device, and authenticate with OmniPass. Select the fingerprint recognition
device in the Select Authentication Device screen (it
should already be marked by a green check if you have a
finger enrolled) and click Next.
System Settings
The OmniPass Startup Options interface can be found
in the System Settings tab. With these options you can
specify how your OmniPass Logon is tied to your
Windows Logon.
The first option, Automatically log on to OmniPass as
the current user, will do just as it says; during Windows
login, you will be logged on to OmniPass using your
Windows login credentials. If the user logging into
Windows was never enrolled into OmniPass, upon login
no one will be logged on to OmniPass. This setting is
appropriate for an office setting or any setting where
users must enter a username and password to log into a
computer. This is the default setting.
With the second option, Manually log on to OmniPass
at startup, OmniPass will prompt you to login once you
have logged on to Windows.
With the third option, Do not log on to OmniPass at
startup, OmniPass will not prompt for a user to be
logged on.
You can manually log on to OmniPass by right-clicking
the OmniPass taskbar icon and clicking Log in User
from the right-click menu.
TROUBLESHOOTING
Cannot add a User with a Blank Password to OmniPass
If you experience difficulties adding a user with a
blank password to OmniPass, you may need to adjust
your local security settings. First attempt the procedure explained in the Cannot add Windows user to
OmniPass section. If the difficulties persist, then try
the following procedure.
Click Start, Control Panel, Administrative Tools,
and Local Security Settings. Expand Local Policies,
expand Security Options, and double-click
Accounts: Limit local account use of blank passwords to console login only. This setting should be
set to Disabled.
Dialog appears after OmniPass authentication during
Windows Logon
After installing OmniPass on your system, you can
choose to logon to Windows using OmniPass. You
authenticate with OmniPass (via master password, or
an enrolled security device) and OmniPass logs you
into Windows. You may, during this OmniPass
authentication, see a Login Error dialog box.
This dialog box occurs when OmniPass was unable to
log you into Windows with the credentials supplied
(username and password). This could happen for any
of the following reasons:
■
■
Your Windows password has changed
Your Windows account has been disabled
If you are having difficulties due to the first reason,
you will need to update OmniPass with your changed
Windows account password. Click Update Password
and you will be prompted with a dialog to reconfirm
your password.
Enter the new password to your Windows user
account and click OK. If the error persists, then it is
unlikely the problem is due to your Windows user
account password changing.
You cannot use OmniPass to create Windows users. You
must first create the Windows user, and you will need
administrative privileges to do that. Once the Windows
user is created, you can add that user to OmniPass using
the same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user
to OmniPass, you may need to adjust your local security settings. You can do this by going to Start,
Control Panel, Administrative Tools, and Local
Security Settings. Expand Local Policies, expand
Security Options, and double-click Network Access:
Sharing and Security Model for Local Accounts. The
correct setting should be Classic - Local Users Authenticate as Themselves.
107
P7010.book Page 108 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook – Appendix
108
P7010.book Page 109 Wednesday, June 1, 2005 3:39 PM
Index
Index
AC
adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 95
plug adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
DC
output cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
power jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 23
Anti-theft lock slot . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Auto Insert Notification . . . . . . . . . . . . . . . . . . . . . . . 36
DIMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Auto/Airline Adapter . . . . . . . . . . . . . . . . . . . . . . 23, 95
Disk care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Automatically Downloading Driver Updates . . . . . . 78
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 24
adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
battery bay release button . . . . . . . . . . . . . . . . . . . 11
care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
charging indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12
conserving power . . . . . . . . . . . . . . . . . . . . . . . . . . 27
increasing life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
level indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
lithium ion battery . . . . . . . . . . . . . . . . . . . . . . 31, 96
low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
recharging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
shorted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
suspend mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
setup utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Dolby Headphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Drivers and Application Restore CD . . . . . . . . . . . . .77
DVD/CD-RW drive
control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
tray release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
DVD-RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Extended Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
External Floppy Disk Drive . . . . . . . . . . . . . . . . . . . . .33
Built-in Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
External Monitor Port . . . . . . . . . . . . . . . . . . . . . . .9, 46
Cache Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
FDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78, 89
Click Me! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fingerprint Sensor Device . . . . . . . . . . . . . . . . . . . . .101
enrolling a fingerprint . . . . . . . . . . . . . . . . . . . . . .103
getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
installing OmniPass . . . . . . . . . . . . . . . . . . . . . . . .101
logging into a remembered site . . . . . . . . . . . . . . .104
OmniPass authentication toolbar . . . . . . . . . . . . .103
password replacement . . . . . . . . . . . . . . . . . . . . . .103
remembering a password . . . . . . . . . . . . . . . . . . . .103
uninstalling OmniPass . . . . . . . . . . . . . . . . . . . . . .102
user enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
using OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Cold-swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Compact Flash
card slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
eject button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cursor control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cursor Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Firewire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 45
109
P7010.book Page 110 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook
Flexible bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 18
cold-swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
hot-swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
release latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Floppy Disk
ejecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
preparing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
write protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
33
33
33
33
33
Floppy Disk Drive
care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Fujitsu Driver Update utility . . . . . . . . . . . . . . . . 78, 89
Fujitsu HotKey Utility . . . . . . . . . . . . . . . . . . . . . . . . 89
Fujitsu LifeBook
care and maintenance . . . . . . . . . . . . . . . . . . . . . . . 81
traveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Function Key
F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
14
14
14
14
14
14
14
14
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Hard Disk Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hard Disk/CD Access Indicator . . . . . . . . . . . . . . . . . 12
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 45
Hibernation Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 27
disable/enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hot-swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
IEEE 1394 port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 45
Indicators
Caps Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Num Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Scroll Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Integrated Wireless LAN . . . . . . . . . . . . . . . . . . . . . . 47
Internal LAN port . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
110
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6, 13
cursor keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
key indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . .13
numeric keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Windows keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
windows keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
LAN (RJ-45) port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
LifeBook P7000 notebook . . . . . . . . . . . . . . . . . . . . . . .5
unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Lithium ion Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Memory
capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Memory Module Cover . . . . . . . . . . . . . . . . . . . . . . . .11
Memory Stick/SD Card . . . . . . . . . . . . . . . . . . . . . . . . .6
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6, 40
Memory Upgrade Module . . . . . . . . . . . . . . . . . . . . . .42
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Microphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 46
Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
result codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Modular Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Optical Digital
audio connector . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
audio-out jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Optical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
DVD/CD-RW combo . . . . . . . . . . . . . . . . . . . . . . .34
emergency tray release . . . . . . . . . . . . . . . . . . . . . . .36
Multi-Format DVD Writer . . . . . . . . . . . . . . . . . . .34
software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
P7010.book Page 111 Wednesday, June 1, 2005 3:39 PM
Index
Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
PC Card
care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
eject button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 39
slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
device ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
dimensions and weight . . . . . . . . . . . . . . . . . . . . . .88
environmental requirements . . . . . . . . . . . . . . . . . .88
features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
mass storage device options . . . . . . . . . . . . . . . . . . .87
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
MS Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
popular accessories . . . . . . . . . . . . . . . . . . . . . . . . . .88
power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Port Access Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 97
error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Power
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
auto/airline adapter . . . . . . . . . . . . . . . . . . . . . . . .
management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
23
27
28
23
Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . . . .7, 12
Stereo Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Power Management . . . . . . . . . . . . . . . . . . . . . . . 27, 28
Suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Suspend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Power On Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Suspend/Resume/Power On Button . . . . . . . . . . . .7, 27
Pre-Installed Software . . . . . . . . . . . . . . . . . . . . . . . . .
Adobe Acrobat Reader . . . . . . . . . . . . . . . . . . . . . .
manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Norton AntiVirus 2004 . . . . . . . . . . . . . . . . . . . . .
Quicken New User Edition . . . . . . . . . . . . . . . . . .
tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
89
89
89
89
89
S-Video Out Port . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 45
Pre-installed Software
restoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
clicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
double-clicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
dragging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
pointing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
scroll button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
scrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PS/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . 91
Re-Installing Individual Drivers and Applications . 77
Restarting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Restoring software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Restoring the Factory Image . . . . . . . . . . . . . . . . . . . 77
RJ-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 44
RJ-45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 44
SD Card
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SDRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Secure Digital Card
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Swapping batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .87
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
built-in speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
display panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
DVD/CD-RW drive . . . . . . . . . . . . . . . . . . . . . . . . .68
hard disk drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
identifying the problem . . . . . . . . . . . . . . . . . . . . . .67
keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71, 72
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Troubleshooting Table . . . . . . . . . . . . . . . . . . . . . . . . .68
111
P7010.book Page 112 Wednesday, June 1, 2005 3:39 PM
LifeBook P7000 Notebook
Universal Serial Bus Ports . . . . . . . . . . . . . . . . . . . . . . 45
USB
ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 45
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Windows keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
application key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
start keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Wireless LAN
access point (infrastructure) mode . . . . . . . . . . . . 51
activating the WLAN device . . . . . . . . . . . . . . . . . 52
ad hoc mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
before using the wireless LAN . . . . . . . . . . . . . . . . 50
configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
deactivating the WLAN device . . . . . . . . . . . . . . . 51
Devices covered by this document . . . . . . . . . . . . 50
IP address information . . . . . . . . . . . . . . . . . . . . . . 62
modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
on/off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
using Atheros Client Utility software . . . . . . . . . . 54
using Intel PROSet software . . . . . . . . . . . . . . . . . 53
wireless LAN glossary . . . . . . . . . . . . . . . . . . . . . . . 60
wireless network considerations . . . . . . . . . . . . . . 51
112

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:08:29 02:46:36Z
Modify Date                     : 2005:08:29 13:07:59+10:00
Page Count                      : 61
Creation Date                   : 2005:08:29 02:46:36Z
Mod Date                        : 2005:08:29 13:07:59+10:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Donna3
Metadata Date                   : 2005:08:29 13:07:59+10:00
Creator                         : Donna3
Title                           : Microsoft Word - Appendix I User Manual_2.doc
Has XFA                         : No

EXIF Metadata provided by EXIF.tools