Fujitsu Client Computing WB0037 LifeBook P Series w/WLL4070 11ABG WLAN & BT User Manual P Series

Fujitsu Limited LifeBook P Series w/WLL4070 11ABG WLAN & BT P Series

Contents

Users Manal1

CopyrightCopyright & Trademark InformationFujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.Microsoft, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.Atheros and Super AG are registered trademarks of Atheros Communications, Inc.Adobe, Acrobat, and Acrobat Reader are either regis-tered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other coun-tries.Realtek is a trademark of Realtek Semiconductor Corpo-ration. All other trademarks mentioned herein are the property of their respective owners.© Copyright 2005 Fujitsu Computer Systems Corpora-tion. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu Computer Systems Corpora-tion. No part of this publication may be stored or trans-mitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation.B6FH-6861-01EN-00WARNINGHandling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.DECLARATION OF CONFORMITYaccording to FCC Part 15Responsible Party Name: Fujitsu Computer Systems CorporationAddress: 1250 E. Arques Avenue, MS 122Sunnyvale, CA 94085Telephone: (408) 746-6000Declares that product: Model Configuration:LifeBook P1510D Notebook Complies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.P Series.book Page 1 Wednesday, July 13, 2005 10:43 AMThe Bluetooth trademark is owned by Bluetooth SIG, Inc., USA.Please see "Users Manual 2.pdf" for FCC manual statements.
LifeBook P Series NotebookIMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 16 VDC, with a current of 2.5 A.AC adapter output polarity:When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:■Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.■Avoid using the modem during an electrical storm. There may be a remote risk of electric shock from lightning.■Do not use the modem to report a gas leak in the vicinity of the leak.■Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.■To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.SAVE THESE INSTRUCTIONSFor Authorized Repair Technicians OnlySystem Disposal+Danger of explosion if Lithium (clock) bat-tery is incorrectly replaced. Replace only with the same or equivalent type recom-mended by the manufacturer. Dispose of used batteries according to the manufac-turer’s instruction.For continued protection against risk of fire, replace only with the same type and rating fuse.Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, ORFEDERAL LAWS.P Series.book Page 2 Wednesday, July 13, 2005 10:43 AM
Table of ContentsFujitsu LifeBook® P Series NotebookTable of Contents1PREFACEPrefaceAbout This Guide . . . . . . . . . . . . . . . . . . . . . . . . .3Fujitsu Contact Information . . . . . . . . . . . . . . . . .3Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32GETTING TO KNOWYOUR LIFEBOOKOverviewUnpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Optional Accessories . . . . . . . . . . . . . . . . . . . . . .7Locating the Controls/ConnectorsFront and Display Components . . . . . . . . . . . . . .9Left-Side Panel Components . . . . . . . . . . . . . . .10Right-Side Panel Components . . . . . . . . . . . . . .11Rear Panel Components . . . . . . . . . . . . . . . . . . .12Bottom Components . . . . . . . . . . . . . . . . . . . . .13Status IndicatorsPower Indicator . . . . . . . . . . . . . . . . . . . . . . . . .14AC Adapter/Battery Charging Indicator . . . . . . .14Battery Level Indicator . . . . . . . . . . . . . . . . . . . .14Hard Drive Access Indicator . . . . . . . . . . . . . . . .14NumLk Indicator. . . . . . . . . . . . . . . . . . . . . . . . .15CapsLock Indicator. . . . . . . . . . . . . . . . . . . . . . .15ScrLk Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .15Display PanelOpening the Display Panel . . . . . . . . . . . . . . . . .16Using the System as a Tablet . . . . . . . . . . . . . . .16Adjusting Display Panel Brightness . . . . . . . . . . .17KeyboardUsing the Keyboard . . . . . . . . . . . . . . . . . . . . . .18Numeric Keypad. . . . . . . . . . . . . . . . . . . . . . . . .18Windows Keys . . . . . . . . . . . . . . . . . . . . . . . . . .18Cursor Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Function Keys. . . . . . . . . . . . . . . . . . . . . . . . . . .19LifeBook Application PanelChanging Button Functions . . . . . . . . . . . . . . . .21Quick Point/Touch ScreenClicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Double-Clicking . . . . . . . . . . . . . . . . . . . . . . . . .22Dragging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Quick Point Control Adjustment. . . . . . . . . . . . .23Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . .23Volume ControlControlling the Volume . . . . . . . . . . . . . . . . . . .253USING YOUR LIFEBOOKPower SourcesConnecting the Power Adapters . . . . . . . . . . . . .29Starting Your LifeBookPower On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . .30BIOS Setup Utility. . . . . . . . . . . . . . . . . . . . . . . .30Booting the System . . . . . . . . . . . . . . . . . . . . . .31Registering Your LifeBook notebook. . . . . . . . . .31Installing Click Me!. . . . . . . . . . . . . . . . . . . . . . .31Power ManagementSuspend/Resume Button . . . . . . . . . . . . . . . . . .32Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . .32Hibernate Mode . . . . . . . . . . . . . . . . . . . . . . . . .33Display Timeout . . . . . . . . . . . . . . . . . . . . . . . . .33P Series.book Page 3 Wednesday, July 13, 2005 10:43 AM
LifeBook P SeriesHard Disk Timeout . . . . . . . . . . . . . . . . . . . . . . . 33Windows Power Management . . . . . . . . . . . . . . 33Restarting the System. . . . . . . . . . . . . . . . . . . . . 33Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344USER-INSTALLABLE FEATURESLithium ion BatteryRecharging the Battery. . . . . . . . . . . . . . . . . . . . 37Replacing the Battery . . . . . . . . . . . . . . . . . . . . . 38Memory Upgrade ModuleInstalling Memory Upgrade Modules . . . . . . . . . 39Removing a Memory Upgrade Module . . . . . . . 39Checking the Memory Capacity . . . . . . . . . . . . . 40Secure Digital MediaInserting SD Cards . . . . . . . . . . . . . . . . . . . . . . . 41Removing An SD Card . . . . . . . . . . . . . . . . . . . . 41Compact Flash CardsInserting Compact Flash Cards . . . . . . . . . . . . . . 42Removing Compact Flash Cards. . . . . . . . . . . . . 43Port ReplicatorPort Replicator Components. . . . . . . . . . . . . . . . 44Attaching Port Replicator . . . . . . . . . . . . . . . . . . 44Detaching Port Replicator. . . . . . . . . . . . . . . . . . 44Device PortsModem (RJ-11) Jack . . . . . . . . . . . . . . . . . . . . . 46Internal LAN (RJ-45) jack . . . . . . . . . . . . . . . . . . 46Docking Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Universal Serial Bus Ports . . . . . . . . . . . . . . . . . . 46Microphone Jack . . . . . . . . . . . . . . . . . . . . . . . . 46Headphone Jack. . . . . . . . . . . . . . . . . . . . . . . . . 46External Video Port . . . . . . . . . . . . . . . . . . . . . . 475TROUBLESHOOTINGTroubleshootingIdentifying the Problem . . . . . . . . . . . . . . . . . . . 51Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . 51Troubleshooting Table . . . . . . . . . . . . . . . . . . . . 52Power On Self Test Messages . . . . . . . . . . . . . . 58Modem Result Codes. . . . . . . . . . . . . . . . . . . . . 59Restoring Your Pre-installed SoftwareRestoring the Factory Image . . . . . . . . . . . . . . . 60Automatically Downloading Driver Updates. . . . 616CARING FOR YOUR LIFEBOOKCare and MaintenanceLifeBook P Series notebook . . . . . . . . . . . . . . . . 65Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Floppy Disk Drive and Floppy Disks . . . . . . . . . . 66Optional Optical Drive and Discs . . . . . . . . . . . . 67CF Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677SYSTEM SPECIFICATIONSSpecificationsConfiguration Label . . . . . . . . . . . . . . . . . . . . . . 71Physical Specifications . . . . . . . . . . . . . . . . . . . . 71Processing Specifications . . . . . . . . . . . . . . . . . . 71Memory/Storage Specifications . . . . . . . . . . . . . 71Display Specifications. . . . . . . . . . . . . . . . . . . . . 71Interface Specifications . . . . . . . . . . . . . . . . . . . 71Power Specifications . . . . . . . . . . . . . . . . . . . . . 72Environmental Specifications . . . . . . . . . . . . . . . 72Agency Approval Specifications . . . . . . . . . . . . . 72Additional Specifications . . . . . . . . . . . . . . . . . . 72Regulatory Information . . . . . . . . . . . . . . . . . . . 738GLOSSARYGlossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77P Series.book Page 4 Wednesday, July 13, 2005 10:43 AM
Table of ContentsAPPENDIX A: INTEGRATED WIRELESS LAN USER’S GUIDEBefore Using the Wireless LANWireless LAN Modes Using this Device. . . . . . . .86Wireless Network Considerations . . . . . . . . . . . .87Deactivating the WLAN Device . . . . . . . . . . . . .87Activating the WLAN Device . . . . . . . . . . . . . . .88Configuration of the WLAN DeviceFlow of Operations. . . . . . . . . . . . . . . . . . . . . . .89Configuration Using Atheros Client Utility . . . . .89Connection to the network. . . . . . . . . . . . . . . . .90Troubleshooting the WLANTroubleshooting Table . . . . . . . . . . . . . . . . . . . .93Wireless LAN GlossaryGlossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94IP address informationAbout IP Addresses . . . . . . . . . . . . . . . . . . . . . .96WLAN SpecificationsSpecifications . . . . . . . . . . . . . . . . . . . . . . . . . . .97APPENDIX B: USING THE FINGERPRINT SWIPE SENSORFingerprint Sensor DeviceIntroducing the Fingerprint Sensor Device . . . . 101Getting Started. . . . . . . . . . . . . . . . . . . . . . . . .101Installing OmniPass . . . . . . . . . . . . . . . . . . . . .101User Enrollment . . . . . . . . . . . . . . . . . . . . . . . .102Using OmniPass . . . . . . . . . . . . . . . . . . . . . . . .103Configuring OmniPass . . . . . . . . . . . . . . . . . . .105OmniPass Control Center. . . . . . . . . . . . . . . . .106Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .107P Series.book Page 5 Wednesday, July 13, 2005 10:43 AM
LifeBook P SeriesP Series.book Page 6 Wednesday, July 13, 2005 10:43 AM
11PrefaceP Series.book Page 1 Wednesday, July 13, 2005 10:43 AM
2LifeBook P Series NotebookP Series.book Page 2 Wednesday, July 13, 2005 10:43 AM
3PrefacePrefaceABOUT THIS GUIDEThe LifeBook® P Series notebook from Fujitsu Computer Systems Corporation is a small yet powerful convertible computer. It can be used either as a standard notebook using keyboard input, or in tablet configura-tion using pen input. It is powered by an Intel® Pentium® M microprocessor, has a built-in color display with a passive digitizer, and brings the computing power of desktop personal computers (PCs) to a versatile portable environment.This manual explains how to operate your LifeBook P Series notebook’s hardware and built-in system soft-ware. Your notebook comes with the Windows® XP operating system pre-installed.Your LifeBook P Series notebook is a completely self-contained unit with an active-matrix (TFT) color LCD display. The notebook has a powerful interface that enables it to support a variety of optional features.Conventions Used in the GuideKeyboard keys appear in brackets. Example: [Fn], [F1], [Esc], [Enter] and [Ctrl].Pages with additional information about a specific topic are cross-referenced within the text.Example: (See page xx.)On screen buttons or menu items appear in bold.Example: Click OK to restart your notebook.DOS commands you enter appear in Courier type. Example: Shutdown the computer?FUJITSU CONTACT INFORMATIONService and SupportYou can contact Fujitsu Computer Systems Service and Support the following ways:■Toll free: 1-800-8Fujitsu (1-800-838-5487)■Fax: 1-408-764-2724 ■E-mail: 8fujitsu@us.fujitsu.com ■Web site: http://www.computers.us.fujitsu.com/supportBefore you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:■Product name■Product configuration number■Product serial number■Purchase date■Conditions under which the problem occurred■Any error messages that have occurred■Type of device connected, if anyFujitsu OnlineYou can go directly to the online Fujitsu Product catalog for your notebook. Go to Start -> Fujitsu Weblinks -> LifeBook Accessories.You can also reach Fujitsu Service and Support online by going to Start -> Fujitsu Weblinks -> Fujitsu Service and Support.WARRANTYYour LifeBook P Series notebook is backed by an International Limited Warranty and includes toll-free technical support. Check the service kit that came with your notebook for warranty terms and conditions.The information icon highlights information that will enhance your understanding of the subject material.The caution icon highlights information that is important to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully.The warning icon warns you about possible hazards that can occur to you, your system, or your files. Please read all warning information carefully.You must have an active internet connection to use the online URL links.P Series.book Page 3 Wednesday, July 13, 2005 10:43 AM
4LifeBook P Series NotebookP Series.book Page 4 Wednesday, July 13, 2005 10:43 AM
52Getting to KnowYour LifeBookP Series.book Page 5 Wednesday, July 13, 2005 10:43 AM
6LifeBook P Series Notebook - Section TwoP Series.book Page 6 Wednesday, July 13, 2005 10:43 AM
7Getting to Know Your Tablet PC Figure 2-1. Fujitsu LifeBook P Series notebook OverviewThis section describes the components of your Fujitsu LifeBook P Series notebook. We strongly recommend that you read it before using your notebook, even if you are already familiar with mobile computers.UNPACKINGWhen you receive your LifeBook P Series notebook, unpack it carefully, and compare the parts you have received with the items listed below.For a pre-configured model you should have:■LifeBook P Series notebook (Figure 2-1)■AC adapter with AC power cord (Figure 2-2)■Phone/Modem (RJ-11) telephone cable■Pen■Pen tether■Driver and Application Restore (DAR) CD■Recovery CD■Third-party Application CD■Getting Started Guide■User’s Guide (this document)■International Limited Warranty Booklet■Certificate of Authenticity■Lithium ion battery (pre-installed)You may also have one or more of the following devices in the box, depending upon the configuration of your system:■Port Replicator (Figure 2-3)■External USB Floppy Disk Drive■Additional battery(s)■Application CD(s) for third-party software Figure 2-2. AC AdapterFigure 2-3. Optional Port ReplicatorOPTIONAL ACCESSORIESA variety of optional accessories is available for use with your LifeBook P Series notebook. For the latest list of accessories available, be sure to frequently check the Fujitsu Web site at: www.shopfujitsu.com. Refer to the instructions provided with these accessories for details on their use.P Series.book Page 7 Wednesday, July 13, 2005 10:43 AM
8LifeBook P Series Notebook - Section Two Locating the Controls and ConnectorsConnectors and peripheral interfaces on the LifeBook P Series notebook and the optional port replicator allow you to connect a variety of devices. Specific locations are illustrated in Figures 2-4 through 2-8. The table below provides a short description of each icon on the Life-Book P Series notebook. Each of the icons is either molded into or printed on the notebook chassis. Table 2-1. System iconsConnection LifeBook Icon PurposeDC in connector Connect an external power source such as the AC adapter or auto/airline adapter. Secure Digital (SD) Slot The Secure Digital (SD) card slot allows you to install a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices.USB Ports Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the notebook. Microphone Jack Connect an external microphone. The internal microphone is disabled when you plug in an external microphone. Fingerprint Sensor Use the fingerprint sensor to log onto the system using your fingerprint as the "password".Headphone Jack Connect stereo headphones or powered external speakers. The internal speaker is disabled when you plug in external headphones or powered speakers. Modem Connect a telephone line to the internal modem using a standard RJ-11 telephone plug.Port Replicator Connect the notebook port replicator or other approved docking device. Refer to documentation accompanying the dock for more information.Security lock slot The security slot allows you to secure the notebook using notebook locking devices.Suspend/Resume buttonThe Suspend/Resume button allows you to suspend notebook activity without powering off, resume from suspend mode, and power on the system when it has been shut down from Windows. Local Area Network (LAN)The LAN (RJ-45) jack is used to connect the internal 10/100 Base-T/Tx Ethernet to a Local Area Network (LAN) in your office or home, or broadband devices such as a cable modem, DSL, or satellite Internet. Battery Release LatchThe battery release latch allows you to remove the battery from your system for storage or replacement.Wireless LAN On-Off SwitchThe wireless LAN switch allows you to turn power to the optional wireless LAN device on and off.Display Rotation This icon indicates the direction in which the display should be rotated when converting to tablet mode.P Series.book Page 8 Wednesday, July 13, 2005 10:43 AM
9Getting to Know Your Tablet PCFigure 2-4. LifeBook P Series notebook with display openFRONT AND DISPLAY COMPONENTSThe following is a brief description of the front and display features of the LifeBook P Series notebook. (Figure 2-4)Display Panel LatchThe display panel latch holds the display panel in posi-tion. Display PanelThe display panel is a color LCD panel with back lighting for the display of text and graphics and touch screen functionality. Built-in MicrophoneThe built-in microphone allows you to input mono audio. LifeBook Application ButtonsThe LifeBook P Series notebook Application Buttons provide application launch capabilities. See “LifeBook Application Panel” on page 20.Suspend/Resume ButtonThe Suspend/Resume button allows you to suspend notebook activity without powering off, resume your notebook from standby mode, and power on your system when it has been shut down from the Windows operating system. See “Power On” on page 30.KeyboardA full-function keyboard with dedicated Windows keys. See “Keyboard” on page 18.Touchpad Pointing DeviceThe Touchpad pointing device consists of two mouse-like buttons and one scroll button. See “Quick Point Pointing Device/Touch Screen” on page 22.Rotation HingeThe rotation hinge allows you to transform your computer from a notebook configuration into a tablet configuration. See “Using the System as a Tablet” on page 16.Fingerprint SensorThe optional fingerprint recognition sensor allows you to start your system by swiping your finger over the sensor. See “Fingerprint Sensor Device” on page 101.Status Indicator PanelThe Status Indicator Panel displays symbols that corre-spond to specific components of your LifeBook P Series notebook. See “Status Indicators” on page 14.DisplayStatusLifeBookIndicatorPanelPanelLatchRotation HingeApplicationSuspend/ResumeButtonBuilt-in MicrophoneFingerprintSensorButtonsTouchpad PointingDevice (in front of keyboard)P Series.book Page 9 Wednesday, July 13, 2005 10:43 AM
10LifeBook P Series Notebook - Section Two Figure 2-5. LifeBook P Series notebook left-side panelLEFT-SIDE PANEL COMPONENTSFollowing is a brief description of your notebook’s left-side components. (Figure 2-5)USB 2.0 PortThe USB 2.0 port allow you to connect Universal Serial Bus devices. See “Universal Serial Bus Ports” on page 46.Compact Flash Card SlotThe Compact Flash (CF) Card Slot allows you to insert a CF Card. The CF Card Eject Button is used when ejecting a CF Card from the slot. See “Inserting Compact Flash Cards” on page 42.Microphone JackThe microphone jack allows you to connect an external mono microphone. See “Microphone Jack” on page 46.Headphone JackThe headphone jack allows you to connect stereo head-phones or powered external speakers. See “Headphone Jack” on page 46.Compact Flash Card SlotUSB 2.0 Port Compact Flash CardEject ButtonHeadphone JackMicrophone JackP Series.book Page 10 Wednesday, July 13, 2005 10:43 AM
11Getting to Know Your Tablet PCFigure 2-6. LifeBook P Series notebook right-side panelRIGHT-SIDE PANEL COMPONENTSFollowing is a brief description of your notebook’s right-side components. Pen/Pen HolderThe pen is used as the interface with the digitizer display.WLAN On/Off SwitchThe wireless LAN On/Off Switch is used to power off the wireless antenna when not in use.SD CardThe Secure Digital (SD) card slot allows you to insert a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices.USB 2.0 PortThe USB 2.0 port allow you to connect Universal Serial Bus devices. See “Universal Serial Bus Ports” on page 46.DC Power JackThe DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your notebook and charge the internal Lithium ion Battery.USB 2.0 PortSecure Digital (SD) Card SlotPen/Pen HolderWLAN On/Off Switch DC Power JackP Series.book Page 11 Wednesday, July 13, 2005 10:43 AM
12LifeBook P Series Notebook - Section Two Figure 2-7. LifeBook P Series notebook rear panelREAR PANEL COMPONENTSModem (RJ-11) Telephone PortThe Modem (RJ-11) telephone port is for attachinga telephone line to the internal multinational 56K modem. Anti-theft Lock SlotThe anti-theft lock slot allows you to attach a optional physical lock-down device.LAN (RJ-45) PortThe internal LAN (RJ-45) port is used for an internal 10/100Base-Tx Ethernet. See “Internal LAN (RJ-45) jack” on page 46.External Video PortThe external video port allows you to connect an external CRT monitor or LCD projector. Note that when the optional Port Replicator is attached to the system, you must use the external video port on the Port Repli-cator rather than the port on the system. See “External Video Port” on page 47.Air VentsThe air vents allow proper air circulation to ensure that the notebook does not overheat.External LAN (RJ-45) PortModem (RJ-11) PortVideo PortAir VentsAnti-theft Lock Slot(behind cover)The internal multinational modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook P Series notebook. Consult your PBX manufacturer’s documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem.The internal modem is designed to the ITU-T V.90 standard. Its maximum speed of 53000 bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600 bps at upload. To protect your notebook from damage and to optimize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion.P Series.book Page 12 Wednesday, July 13, 2005 10:43 AM
13Getting to Know Your Tablet PCFigure 2-8. LifeBook P Series notebook bottom panelBOTTOM COMPONENTSFollowing is a brief description of your notebook’s bottom panel components. (Figure 2-8)Lithium ion Battery CompartmentThe battery compartment contains the internal Lithium ion battery. The battery should be removed when the computer is stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery. See “Lithium ion Battery” on page 37.Port Replicator ConnectorThis connector allows you to connect the optional port replicator. SpeakerThe speaker allows you to listen to sound from your system.Main Unit and Configuration LabelThe configuration label shows the model number and other information about your LifeBook P Series note-book. In addition, the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative. It identifies the exact version of various components of your notebook. Memory Upgrade CompartmentYour notebook comes with high speed DDR2 Synchro-nous Dynamic RAM (SDRAM). The memory upgrade compartment allows you to expand the system memory capacity of your notebook, hence improving overall performance. See “Memory Upgrade Module” on page 39.Air VentsThe air vents allow proper air circulation to ensure that the notebook does not overheat.Memory Lithium ionBatteryMain Unit andConfigurationLabel (approximateBatteryPort ReplicatorConnectorlocation)PackLatchBatteryPackLatchUpgradeCompartmentSpeakerAir VentsAir VentsTo protect your notebook from damage and to optimize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion.P Series.book Page 13 Wednesday, July 13, 2005 10:43 AM
14LifeBook P Series Notebook - Section Two Figure 2-9. Status IndicatorsStatus IndicatorsThe status indicators display symbols that correspond to specific components of your notebook. (Figure 2-9) The symbols show how each of those components is oper-ating. Note that keyboard-related indicators (CapsLk, NumLk, ScrLk) are located above the keyboard.POWER INDICATORThe Power indicator symbol located on the power button shows whether your system is operational. When it is lit blue, it means that there is power to your note-book and that it is ready for use. AC ADAPTER/BATTERY CHARGING INDICATORThe AC Adapter/Battery Charging indicator shows that your notebook is operating from the AC adapter or an auto/airline adapter. This icon has two different states that can tell you the battery charge status.■Green: This means that a power adapter is currently in use and the battery is not charging.■Amber: This means that a power adapter is currently in use and the battery is charging.BATTERY LEVEL INDICATORThe Battery Level indicators shows whether the Lithium ion battery is installed and charging, and how much charge is available within the batteries. ■Green: The battery is installed and fully charged.■Amber: The battery is installed and is approximately half charged.■Red: The battery charge is low and it should be charged with an adapter or replaced with a charged battery.HARD DRIVE ACCESS INDICATORThe Hard Drive Access indicator lights green when your internal hard drive is being accessed.Battery LevelHard Drive AccessNumLkScrLkCapsLkPower Button/AC Adapter/IndicatorChargingBatteries subjected to shocks, vibration or extreme temperatures can be permanently damaged.If there is no battery activity and the power adapters are not connected, the Battery Level indicators will also be off.P Series.book Page 14 Wednesday, July 13, 2005 10:43 AM
15Getting to Know Your Tablet PCNUMLK INDICATORThe NumLk indicator shows that the integral keyboard is set in ten-key numeric keypad mode. CAPSLOCK INDICATORThe CapsLock indicator shows that your keyboard is set to type in all capital letters. SCRLK INDICATORThe ScrLk indicator shows that your scroll lock is active. P Series.book Page 15 Wednesday, July 13, 2005 10:43 AM
16LifeBook P Series Notebook - Section Two Figure 2-10. Opening the displayDisplay PanelThe convertible design of your LifeBook P Series note-book allows you to open the display fully, rotate it 180 degrees, and lay it face up on the keyboard. This allows you to use the system as a tablet, much as you would a pad of paper.OPENING THE DISPLAY PANELLift the display cover backwards, being careful not to touch the screen, until it is at a comfortable viewing angle. (Figure 2-10)USING THE SYSTEM AS A TABLETIf you would like to use the system as a tablet, perform the following steps. 1. Lift the display until it is perpendicular to the keyboard. (Figure 2-12).2. When the display is perpendicular to the keyboard, rotate it clockwise (when viewed from the top). Be very careful to rotate it in the direction indicated. (Figure 2-13). Turn the display 180 degrees so that it is facing backwards. (Figure 2-14)3. Holding the top edge of the display panel, pull it forward until it is lying nearly atop the keyboard.4. Push the latch towards the display (See “A” in Figure 2-11). The latch will click twice and the top latch disappears, and the bottom latch appears (See “B” in Figure 2-11). Lay the display flush against the system so that the latch rests in the slot in the battery pack. You can now use the system as a tablet. (Figure 2-15)Figure 2-11. Using the Display Latch5. To return the system to notebook configuration, repeat step 3 and 2. Be sure to turn the display in the opposite direction when performing step 2.Display CoverLatch Slot LatchRotate the system display only in the direction indicated in the procedure. Turning the display in the incorrect direction could damage the hinge.In the following step, be sure to position the display perpendicular to the keyboard, otherwise the keyboard or display cover could get scratched.ABTop latchBottom latchDisplay SideP Series.book Page 16 Wednesday, July 13, 2005 10:43 AM
17Getting to Know Your Tablet PCFigure 2-12. Fully open displayFigure 2-13. Rotating the displayFigure 2-14. Display rotated completelyFigure 2-15. System in tablet configurationADJUSTING DISPLAY PANEL BRIGHTNESSOnce you have turned on your notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness, keyboard, power management utility, and Fujitsu menu. Using Keyboard to Adjust BrightnessAdjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the func-tion keys automatically changes the brightness settings in the system’s Brightness Control settings). ■[Fn+F6]: Pressing repeatedly will lower the brightness of your display.■[Fn+F7]: Pressing repeatedly will increase thebrightness of the display.Using Power Management to Adjust BrightnessTo adjust brightness with the power management utility, click Start -> Control Panel -> Brightness Control. Set the screen brightness slider for battery and AC power scenarios.Using the Fujitsu Menu to Adjust BrightnessTo adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen. From the menu that appears, select Brightness Control. The Brightness Control window will open. Set the screen brightness slider for battery and AC power scenarios. 90oIf using AC power, your brightness setting is set to its highest level by default. If using battery power your brightness settings is set to approximately mid-level by default.The higher the brightness level, the more power the LifeBook P Series notebook will consume and the faster your batteries will discharge. For maximum battery life, make sure that the brightness is set as low as possible.P Series.book Page 17 Wednesday, July 13, 2005 10:43 AM
18LifeBook P Series Notebook - Section TwoFigure 2-16. KeyboardKeyboardUSING THE KEYBOARDYour LifeBook P Series notebook has an integral 82-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. (Figure 2-16)■Numeric keypad: Your notebook allows certain keys to serve dual purposes, both as standard characters and as numeric and mathematical keys. The ability to tog-gle between the standard character and numerical keys is controlled through the [NumLk] key.■Cursor keys: Your keyboard contains four arrowkeys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. ■Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. ■Windows keys: These keys work with your Windows operating system and function the same as the onscreen Start menu button, or the right button on your pointing device.NUMERIC KEYPADCertain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys. NumLk can be activated by pressing the [NumLk] key. Turning off the NumLk feature is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform addition ( + ), subtraction ( - ),multiplication ( * ), or division ( / ), and enter decimal points ( . ) using the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary func-tions. (Figure 2-16) WINDOWS KEYSYour LifeBook P Series notebook has two Windows keys: a Start key and an Application key. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The Application key func-tions the same as your right mouse button and displays shortcut menus for the selected item. (Please refer to your Windows documentation for additional informa-tion regarding the Windows keys.) (Figure 2-16)CURSOR KEYSThe cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down, left, and right in applications. In programs such as Windows Explorer, it moves the “focus” (selects the next item up, down, left, or right). (Figure 2-16)Back SpaceFn Key Start KeyFunction KeysNumeric KeypadApplication Key Cursor Keys(outlined with thickblack line) P Series.book Page 18 Wednesday, July 13, 2005 10:43 AM
19Getting to Know Your Tablet PCFUNCTION KEYSYour notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software docu-mentation to find out how these keys are used. (Figure 2-16)[Fn] KeyThe [Fn] key provides extended functions for thenotebook and is always used in conjunction with another key. ■[Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.■[Fn+F4]: Pressing [F4] while holding [Fn] will toggle the built-in pointing device on and off. Note that the [Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See “Entering the BIOS Setup Utility” on page 30)■[Fn +F5]: Pressing [F5] while holding [Fn] allows you to toggle between video compensation and no compensation. (Video compensation controls spacing on the display. When it is enabled, displays with less than 1024 x 768 or 800 x 600 pixel resolution will still cover the entire screen.)■[Fn+F6]: Pressing [F6] repeatedly while holding [Fn] will lower the brightness of your display. Note that adjusting the brightness using the keyboard changes the system setting.■[Fn+F7]: Pressing [F7] repeatedly while holding [Fn] will increase the brightness of the display.■[Fn+F8]: Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your notebook.■[Fn+F9]: Pressing [F9] repeatedly while holding [Fn] will increase the volume of your notebook.■[Fn+F10]: Pressing [F10] while holding [Fn] allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order, are: built-in display panel only, both built-in display panel, and external monitor or external moni-tor only.P Series.book Page 19 Wednesday, July 13, 2005 10:43 AM
20LifeBook P Series Notebook - Section TwoFigure 2-17. LifeBook P Series notebook application buttons LifeBook Application PanelA unique feature of your LifeBook P Series notebook is the application panel buttons. These buttons allow you to launch specific applications with the touch of a button. The five application buttons are located on the bottom left-hand side of the display when it is configured to be used as a notebook. (Figure 2-17) All five of the buttons have primary functions. Four of the buttons have secondary functions when used as application buttons. The secondary functions are acti-vated by pressing the Function (Fn) button while pressing the application button. See Table 2-2 for specific functions. The secondary functions of the Application A and B buttons can be changed to launch any application. See “Changing Button Functions” on page 21. Table 2-2. Application Button FunctionsPage Down / Application A ButtonWhen you press the Page Down button when the system is running, each press of the button will scroll the screen down one frame. This allows you to navigate quickly through large documents.When you press the Fn button while you press then release the Page Down/Application A button, you will automatically start whichever program is assigned to the button. The default application for this button is Calcu-lator.See “Changing Button Functions” on page 21 to select a different application for this button.Page Up / Application B ButtonWhen you press the Page Up button when the system is running, each press of the button will scroll the screen up one frame. This allows you to navigate quickly through large documents.When you press the Fn button while you press then release the Page Up/Application A button, you will ..ABnApplication A Application B Button 4Enter Button ButtonButton 3ButtonButton Icon Primary Function Secondary Function(Fn + Button)Page Down User-defined Application A(Default = CalculatorPage Up User-Defined Application B(Default = WordPadScreen Rotation VGA-OutSecondary Function Selection Fujitsu Menu UtilityCtl+Alt+Del Button NoneP Series.book Page 20 Wednesday, July 13, 2005 10:43 AM
21Getting to Know Your Tablet PCautomatically start whichever program is assigned to the button. The default application for this button is WordPad.See “Changing Button Functions” on page 21. to select a different application for this button.Screen Rotation / VGA-Out ButtonThe screen rotation feature would normally be used only when the system is configured as a tablet. When you would like to use the tablet as an eBook, for example, you would use the portrait orientation; when accessing spreadsheets or using the system as a note-book, you would more typically use landscape orienta-tion.When the system is changed to tablet configuration, the orientation automatically changes to portrait mode by default. When you press the Screen Rotation / VGA-Out button, the system screen orientation changes from portrait (vertical) to landscape (horizontal) or from landscape to portrait. Function / Fujitsu Menu Utility ButtonThe Function button works in conjunction with the other application buttons to provide additional func-tionality for the buttons. Refer to specific details above.Pressing the Fn button twice in succession causes the Fujitsu Menu Utility to appear on your screen, allowing you to modify certain system settings.Ctl+Alt+Del ButtonPressing and holding the Ctl-Alt-Del button for up to 750 milliseconds launches the Logon screen or the Windows Task Manager (if the system hasn’t yet been configured).CHANGING BUTTON FUNCTIONSThe Application A and B buttons can be changed to launch a program or perform an action you select. By default, the Application A button launches the Calcu-lator, and the Application B button launches WordPad.To launch different applications or cause the Applica-tion A or B buttons to perform a specific action:1. Double-click on the Tablet Button Settings icon in the Control Panel. 2. Select the button you would like to change from the list.3. Click [Change] and open the drop down list in the Action: field.4. Select the action you would like the button to perform. If you want to launch a program, click on Launch an Application then browse to the location of the program.5. Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.The screen orientation default can be changed by going to the Control Panel and double-clicking on the Fujitsu Display Control icon and selecting the desired defaults from the Display Orientation section. After changing the defaults, click [OK]. P Series.book Page 21 Wednesday, July 13, 2005 10:43 AM
22LifeBook P Series Notebook - Section TwoFigure 2-18. Touchpad pointing deviceQuick Point Pointing Device/Touch ScreenThe Quick Point is built into your LifeBook notebook. It is used to control the movement of the cursor to select items on your display panel. The Quick Point is composed of a cursor control at the center of the keyboard and three buttons on the palm rest of your notebook. The cursor control works the same way a mouse ball does, and moves the cursor around the display. It only requires light pressure with the tip of your finger, and the more pressure you use, the faster the cursor will move. The left button functions the same as a left mouse button while the right button has the same function as a right mouse button. When used with the cursor control, the middle button allows you to scroll up and down a screen. The actual functionality of the buttons may vary depending on the application that is being used. (Figure 2-19)CLICKINGClicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the cursor to the item you wish to select, press the bottom button once, and then imme-diately release it. (Figure 2-19)Figure 2-19 ClickingDOUBLE-CLICKINGDouble-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press and release the left button twice. (Figure 2-20)Figure 2-20 Double-clickingDRAGGINGDragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. (Figure 2-21)Figure 2-21 DraggingLeft ButtonRight ButtonScroll ButtonCursor Control■If the interval between clicks is too long, the double-click will not be executed.■Parameters for the Quick Point can be adjusted from the Mouse dialog box located in the Windows Control Panel.P Series.book Page 22 Wednesday, July 13, 2005 10:43 AM
23Getting to Know Your Tablet PCQUICK POINT CONTROL ADJUSTMENTThe Windows Control Panel allows you to customize your Quick Point with selections made from within the Mouse Properties dialog box. There are three aspects of Quick Point operation, which you can adjust:■Buttons: This tab lets you set up the buttons for right or left handed operation, in addition to setting up the time interval allowed between clicks in double-click-ing.■Pointers: This tab lets you set up the scheme forthe cursor depending on its functionality.■Pointer Options: This tab lets you set up a relation between the speed of your finger motion and the speed of the cursor. It also allows you to enable a Pointer Trail for the cursor arrow.TOUCH SCREENThe integrated Touch Screen allows you to use either the included stylus or your fingertip, as a pointing device. You can use the stylus to click, double-click, drag items and icons, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details. (Figure 2-22)Figure 2-22 Using the Stylus with the Touch ScreenClickingTo left-click, touch the object you wish to select and then lift the stylus tip immediately. You also have the option to perform the left-click operation by tapping lightly with your finger on the Touch Screen once. (Figure 2-23)Right-ClickingTo right-click, go to Start -> Control Panel -> Touch Panel. From the Right Button Simulation tab you can specify a right button tool by using the selected button prior to the desired right mouse click.Figure 2-23 Clicking the Touch ScreenDouble-ClickingTo double-click, touch the item twice, and then immedi-ately remove the stylus tip. You also have the option to perform the double-click operation by tapping lightly with your finger on the Touch Screen twice. (Figure 2-24)Figure 2-24 Double-clicking the Touch ScreenDo not use excessive force when tapping or writing on the screen with the stylus or your finger. Use of excessive force could result in damage to the LCD and/or Touch Screen.To avoid potential scratching and damage, never use anything but the included stylus or your finger with the Touch Screen.To purchase additional or replacement styluses, visit Fujitsu’s accessories web site at: www.shopfujitsu.com.P Series.book Page 23 Wednesday, July 13, 2005 10:43 AM
24LifeBook P Series Notebook - Section TwoDraggingDragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Touch Screen with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it. Dragging can also be done using your fingertip. (Figure 2-25)Figure 2-25 Dragging on the Touch ScreenCalibrating the Touch ScreenIn order to ensure accurate tracking between the stylus and cursor, you must run the Touch Screen Calibration Utility before you use the Touch Screen for the first time, or after you change the display resolution and/or orien-tation.To run the calibration utility:1. Go to Start -> Control Panel -> Touch Panel and select the Calibration tab.2. Press the [Calibrate Now] button.3. Adjust the display of your notebook to a comfortable angle and find the red (+) symbol in the upper-left corner of the display.4. Using the stylus, firmly touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the screen.5. Repeat step 4 until you have selected a total of nine symbols. This is the minimum number of points necessary to calibrate your touch screen.6. Once you have selected the nine symbols, press the [Update] button. 7. Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screen’s calibration, press the [Calibrate Now] button to begin again.Do not use excessive force when tapping on the screen during calibration. Use of excessive force could result in damage to the LCD and/or touch panel.When using the stylus to calibrate the screen, be sure to avoid touching the screen with your fingers; doing so could result in faulty calibration.P Series.book Page 24 Wednesday, July 13, 2005 10:43 AM
25Getting to Know Your Tablet PCVolume ControlYour Fujitsu LifeBook notebook has multiple volume controls which interact with each other. CONTROLLING THE VOLUMEThe volume can be controlled in several different ways:■Volume can be set from within the Volume Control on the Taskbar.■Volume can be controlled with the [F8] and [F9] func-tions keys. Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your notebook. Pressing [F9] repeatedly while holding [Fn] will increase the volume of your notebook.■Volume can be controlled by many volume controls that are set within individual applications.■Certain external audio devices you might connect to your system may have hardware volume controls.■Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level.Any software that contains audio files will also contain a volume control of its own. If you install an external audio device that has an independent volume control, the hardware volume control and the software volume control will interact with each other. It should be noted that if you set your software volume to Off, you will override the external volume control setting. There are twenty-six levels through which the function keys cycle. P Series.book Page 25 Wednesday, July 13, 2005 10:43 AM
26LifeBook P Series Notebook - Section TwoP Series.book Page 26 Wednesday, July 13, 2005 10:43 AM
273Using Your LifeBookP Series.book Page 27 Wednesday, July 13, 2005 10:43 AM
28LifeBook P Series Notebook - Section ThreeP Series.book Page 28 Wednesday, July 13, 2005 10:43 AM
29Getting StartedFigure 3-1. Connecting the AC AdapterPower SourcesYour LifeBook P Series notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter.CONNECTING THE POWER ADAPTERSThe AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the battery. Connecting the AC Adapter1. Plug the DC output cable into the DC power jackof your notebook.2. Plug the AC adapter into an AC electrical outlet. (Figure 3-1)Connecting the Optional Auto/Airline Adapter1. Plug the DC output cable into the DC power jackon your notebook.2. Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key inthe On or Accessories position.OR3. Plug the Auto/Airline adapter into the DC power jack on an airplane seat.Switching from AC Adapter Power or theAuto/Airline Adapter to Battery Power1. Be sure that you have a charged battery installed.2. Remove the AC adapter or the Auto/Airline adapter.DC Power PlugDC Output CableAC AdapterAC CableThe Lithium ion battery is not charged upon purchase. Initially, you will need to connect either the AC adapter or the Auto/Airline adapter to use your notebook.P Series.book Page 29 Wednesday, July 13, 2005 10:43 AM
30LifeBook P Series Notebook - Section ThreeStarting Your LifeBookPOWER ONThe Suspend/Resume button is used to turn on your LifeBook P Series notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook. (See figure 2-4 on page 9 for location).Press the Suspend/Resume button to start your system. When you are done working you can either leave your notebook in Standby mode, See “Standby Mode” on page 32., or you can turn it off. See “Power Off” on page 34..When you Power On your notebook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your notebook will emit an audio warning and/or an error message will be displayed. See “Power On Self Test Messages” on page 58. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings.After satisfactory completion of the Power On Self Test (POST), your notebook will load your operating system.BOOT SEQUENCEThe procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’s BIOS. When your notebook is first turned on, the main system memory is empty, and it needs to find instruc-tions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.The boot sequence is executed when:■You turn on the power to your notebook.■You restart your notebook from the Windows Shut Down dialog box.■The software initiates a system restart (e.g., when you install a new application).BIOS SETUP UTILITYThe BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOSis set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS’ environment to operate your notebook.The BIOS Setup Utility configures:■Device control feature parameters, such as changingI/O addresses and boot devices.■System Data Security feature parameters, suchas passwords.Entering the BIOS Setup UtilityTo enter the BIOS Setup Utility do the following: 1. Turn on or restart your notebook.2. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings.BIOS GuideA guide to your notebook’s BIOS is available online. Please visit our service and support Web site at http://www.computers.us.fujitsu.com/support. Once there, select LifeBook BIOS Guides from the pull-down menu for your notebook series. If you are unsure of your note-book’s BIOS number, refer to your packing slip.When you turn on your notebook, be sure you have a power source. This means that a battery is installed and charged, or that a power adapter is connected and has power.When the system display is closed, the Suspend/Resume button is disabled. This feature prevents the system from being accidentally powered up when not in use. Never turn off your notebook during the Power On Self Test (POST) or it will cause an error message to be displayed when you turn your notebook on the next time. See “Power On Self Test Messages” on page 58.If your data security settings require it, you may be asked for a password before the BIOS main menu will appear.P Series.book Page 30 Wednesday, July 13, 2005 10:43 AM
31Getting StartedBOOTING THE SYSTEM We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence.When you turn on your LifeBook notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.Registering Windows with MicrosoftIn order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it. After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.First of all, you will need to read and accept the End User License Agreements (EULAs). After accepting the EULAs, you will be asked if you want to enable the Auto-matic Updates feature. Acceptance of this feature is recommended because it allows your system to be updated automatically whenever an important change becomes available for your notebook.Several additional windows will appear, prompting you to enter a name and description for your computer, an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in the infor-mation as directed. You will then be automatically connected to the Internet, if you have an appropriate connection avail-able. If an automatic connection is not possible, you will be asked about how you dial out from where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button.Once you are connected to the Internet, you will be asked if you wish to continue with the registration. If you select Ye s you will then enter your name and address, and email address if desired. Click Next to complete registration.REGISTERING YOUR LIFEBOOK NOTEBOOKHow do I register my LifeBook notebook?You can register your LifeBook by going to our Web site:http://www.computers.us.fujitsu.com/supportYou will need to be set up with an Internet Service Provider (ISP) to register online. INSTALLING CLICK ME! The first time you boot up your system, you will see an icon called Click Me! in the Start menu. When you click the Click Me! icon, your system will automatically build the icon tray in the bottom right of the screen. These icons provide links to utilities that you will frequently access.■If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows or to shut down your LifeBook notebook.■You cannot use your LifeBook notebook until you have accepted the License Agreement. If you stop the process your notebook will return to the beginning of the Windows Welcome Process, even if you shut your notebook down and start it up again.ClickMe!P Series.book Page 31 Wednesday, July 13, 2005 10:43 AM
32LifeBook P Series Notebook - Section ThreePower ManagementYour LifeBook P Series notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your oper-ating conditions, such as those for the display bright-ness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility.Besides the options available for conserving battery power, there are also some things that you can do to prevent your notebook battery from running down as quickly. For example, you can create an appropriate power saving profile, put your notebook into Standby mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings.Table 3-1. System Power StatesSUSPEND/RESUME BUTTONWhen your notebook is active, the Suspend/Resume button can be used to manually put your notebook into Standby mode. Push the Suspend/Resume button when your notebook is active, but not actively accessing anything, and immediately release the button. You will hear two short beeps and your system will enter Standby mode. (See figure 2-6 on page 11 for location).If your notebook is suspended, pushing the Suspend/Resume button will return your notebook to active oper-ation. You can tell whether or not your system is in Standby mode by looking at the Power indicator. See “” on page 14. If the indicator is visible and not flashing, your notebook is fully operational. If the indicator is both visible and flashing, your notebook is in Standby mode. If the indicator is not visible at all, the power is off or your notebook is in Hibernate mode (See Hibernate Mode)STANDBY MODEStandby mode in Windows saves the contents of your notebook’s system memory during periods of inactivity by maintaining power to critical parts. This mode will turn off the CPU, the display, the hard drive, and all of the other internal components except those necessary to maintain system memory and allow for restarting. Your notebook can be put in Standby mode by:■Pressing the Suspend/Resume button when your system is turned on.■Selecting Standby from the Windows Shut Down menu.■Timing out from lack of activity.■Allowing the battery to reach the Dead BatteryWarning condition.■Closing the system cover.Your notebook’s system memory typically stores the file(s) on which you are working, open application(s) information, and any other data required to support the operation(s) in progress. When you resume operation Power Mode System Activity Events causing system to enter mode stateFully On Mode System is running. CPU, system bus, and all other interfaces operate at full speed.■From Standby mode: System operation resumed (Suspend/Resume button pressed, resume on modem ring, resume on time).■From Hibernation mode: Suspend/Resume button pressed.■From Off mode: Suspend/Resume button pressed.Standby Mode(Suspend-to-RAM)Resume system logic remains powered and RAM remains powered to maintain active data. All other devices are turned off.■Standby timeout occurs.■Suspend request issued by software or by pressing the Suspend/Resume button.■Low battery.Hibernation Mode(Suspend-to-Disk)Windows saves desktop state (including open files and documents) to hard disk. CPU stops. All other devices are turned off.■Suspend timeout occurs.■Clicking Start -> Shut Down -> Hibernate (It may be necessary to Enable Hibernate Support from Windows Power Options.)■Low battery conditionPower Off System is fully powered off except for logic components required for Suspend/Resume button and real-time clock operation.■System shutdown.■Low battery conditionP Series.book Page 32 Wednesday, July 13, 2005 10:43 AM
33Getting Startedfrom Standby mode, your notebook will return to the point where it left off. To resume operation, you must use the Suspend/Resume button to resume operation, and there must be an adequate power source available, or your notebook will not resume.HIBERNATE MODEThe Hibernate mode saves the contents of yournotebook’s system memory to the hard drive as a part of the Suspend/Resume mode. Your notebook is pre-configured to perform this function. The Hibernate mode can also be configured through the system BIOS to run in other ways depending on what you need to accomplish. See “BIOS Setup Utility” on page 30.Using Hibernate ModeHibernate default setting is enabled for Windows XP. To enable or disable the Hibernation feature follow these easy steps:1. From the Start menu, select Control Panel -> Power Options.2. Select the Hibernate tab and then select the box to enable or disable this feature.To use Hibernate mode with your system:1. From the Start menu, select Control Panel -> Power Options.2. Select the Power Schemes tab and in the System hibernates boxes, select the amount of time you want to elapse until the system goes into hibernation (when plugged in and when running on battery power).DISPLAY TIMEOUT The Video Timeout is one of the power management parameters. This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period. Any keyboard or pointer activity will cause the display to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows Power Management.HARD DISK TIMEOUTThe Hard Disk Timeout is another one of the power management parameters. This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period. Any attempt to access the hard drive will cause it to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows.WINDOWS POWER MANAGEMENT The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters. RESTARTING THE SYSTEMIf your system is on and you need to restart it, be sure that you use the following procedure. 1. Click the Start button, and then click Tur n Off Computer.2. Select the Restart button from within the Turn Off Computer window.If you are running your notebook on battery power, be aware that the battery continues to discharge while your notebook is in Standby mode, though not as fast as when fully operational. ■Standby or Hibernate modes should not be used with certain PC Cards. Check your PC Card documentation for more information.■Disabling the Suspend/Resume button prevents it from being used to put your notebook in Standby or Hibernate mode. The resume function of the button cannot be disabled.■If your notebook is actively accessing information when you enter Standby or Hibernate mode, changes to open files are not lost. The files are left open and memory is kept active during Standby mode or the memory is transferred to the hard drive during Hibernate mode.■When PC Cards or external devices are in use, Save-to-Disk mode cannot return to the exact state prior to suspension, because all peripheral devices will be re-initialized when the system restarts.■The main advantage of using Hibernate mode is that power is not required to maintain your data. This is very impor-tant if you will be leaving your notebook in a suspended state for a prolonged period of time. The drawback of using Hibernate mode is that it lengthens the power down and power up sequences and resets peripheral devices.P Series.book Page 33 Wednesday, July 13, 2005 10:43 AM
34LifeBook P Series Notebook - Section ThreePOWER OFFBefore turning off the power by choosing Turn Off Computer from the Windows Start menu, check that the Hard Drive access indicator is off. (See Figure 2-9 on page 14) If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down proce-dure.Using the correct procedure to shut down from Windows allows your notebook to complete its opera-tions and turn off power in the proper sequence to avoid errors. The proper sequence is:1. Click the Start button, and then click Turn Off Computer.2. Select the Turn Off option from within the window.If you are going to store your notebook for a month or more, see the Care and Maintenance section. Turning off your notebook without exiting Windows or turning on your notebook within 10 seconds of the notebook being shut off may cause an error when you start the next time. P Series.book Page 34 Wednesday, July 13, 2005 10:43 AM

Navigation menu