Fujitsu Client Computing WB0073 AR5BHB92 WLAN & EYSMJCS BT IN LIFEBOOK U SERIES User Manual Appendix G

Download:
Mirror Download [FCC.gov]
Document ID	1048391
Application ID	Bscbo0/qUSmtWgPkQfR9Qg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	279.11kB (3488916 bits)
Date Submitted	2008-12-22 00:00:00
Date Available	2008-12-22 00:00:00
Creation Date	2008-07-09 14:12:57
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-11-27 10:15:42
Document Title	Microsoft Word - Appendix G_User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	donna3

FCC ID: EJE-WB0073 (IC: 337J-WB0073)
AR5BHB92
APPENDIX H
FUJITSU USER MANUAL
EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia
www.emctech.com.au
User’s Guide
Learn how to use
your Fujitsu LifeBook
U820 notebook
Copyright and Trademark Information
Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as
ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents
of this document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.
Intel and Atom are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft, Windows, Windows Vista, and OneNote are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
ArcSoft WebCam Companion is a trademark of ArcSoft, Inc.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
ENERGY STAR and the ENERGY STAR certification mark are registered trademarks of the U. S. Government.
OmniPass is a trademark of Softex, Inc.
Realtek is a trademark of Realtek Semiconductor Corporation.
AT&T, the AT&T logo, AT&T slogans, and other AT&T product/service names and logos are trademarks and service marks of AT&T
Intellectual Property or AT&T affiliated companies.
Atheros and Super AG are registered trademarks of Atheros Communications.
Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
All other trademarks mentioned herein are the property of their respective owners.
WARNING
HANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
WASH HANDS AFTER HANDLING.
© Copyright 2008 Fujitsu Computer Systems Corporation. All rights reserved.
No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication
may be stored or transmitted in any electronic form without the written consent of Fujitsu.
B5FJ-8471-01ENZ0-00
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name:
Fujitsu Computer Systems Corporation
Address:
1250 E. Arques Avenue, M/S 122
Sunnyvale, CA 94085
Telephone:
(408) 746-6000
Declares that product:
Base Model Configuration:
LifeBook U820 notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device
may not cause harmful interference, (2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 16 VDC, with a current
of 2.5 A (40 W).
AC adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
•
Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
•
•
•
Avoid using a modem during an electrical storm. There may be a remote risk of electric shock from lightning.
•
•
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.
Do not use a modem to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with
local codes for possible special disposal instructions.
For TV tuner use: To protect from overvoltages and transients on the Cable Distribution System, make sure that the outer shield of
the coaxial cable is connected to earth (grounded) at the building premise as close to the point of cable entrance as practicable, as
required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV installation, contact your service
provider.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTION.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND
RATING FUSE.
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural
occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important
that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of
improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery
Recycling Corporation (RBRC)**, a non-profit public service organization dedicated to protecting our environment
by recycling old batteries at no cost to you.
RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the
location nearest you, go to www.RBRC.org or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website
(http://EIAE.org/) and search for a convenient disposal location.
Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future
generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or
www.fujitsu.ca/products/notebooks in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with
Fujitsu.
Contents
Preface
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 1
Getting to Know Your LifeBook
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Locating the Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Top Components (notebook mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top Components (tablet mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
20
23
25
27
Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Opening the Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the System as a Tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Display Panel Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Touch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Fujitsu Zoom Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
33
34
35
35
Handling the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using in Notebook Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using in Tablet Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Button Control Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Clicking on Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Right-Clicking on Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Double-Clicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Calibrating the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Dragging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Controlling the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
LifeBook Application/Tablet PC Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Button functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changing Tablet PC Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chapter 2
Getting Started with Your LifeBook
Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connecting the Power Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Starting Your LifeBook Notebook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Hard Disk Drive Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Booting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Starting Windows Vista the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Starting Windows XP the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Registering Your LifeBook notebook with Fujitsu . . . . . . . . . . . . . . . . . . 61
installing ClickMe! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Fujitsu Driver Update Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Power/Suspend/Resume Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Hibernation (Save-to-Disk) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Windows Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Restarting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Powering Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
ENERGY STAR® Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Chapter 3
User-Installable Features
Lithium ion Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Recharging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Secure Digital (SD) Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Removing an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Compact Flash (CF) Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Inserting Compact Flash Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Removing Compact Flash Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Universal Serial Bus Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Microphone Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
External Video Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LAN (RJ-45) Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Port Replicator Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Chapter 4
Troubleshooting Your LifeBook
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Identifying the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Power On Self Test Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Restoring Your Pre-installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Re-installing Individual Drivers and Applications . . . . . . . . . . . . . . . . . . . 100
Restoring the Operating System for Windows Vista Systems . . . . . . . . . . 101
Restoring the Operating System for Windows XP Systems. . . . . . . . . . . . 104
Automatically Downloading Driver Updates . . . . . . . . . . . . . . . . . . . . . . . 105
Chapter 5
Care and Maintenance
Caring for your LifeBook Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Cleaning your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Storing your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Traveling with your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Chapter 6
System Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Mass Storage Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Popular Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Pre-Installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Learning About Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Glossary/Regulatory
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Appendix A: Wireless Device User’s Guide
Before Using the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Wireless LAN Device Covered by this Document. . . . . . . . . . . . . . . . . . . 143
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . 146
Deactivation Using the Wireless On/Off Switch . . . . . . . . . . . . . . . . . . . . 147
Disconnection Using the Icon in the Taskbar. . . . . . . . . . . . . . . . . . . . . . . 147
Activating the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Configuring the Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Configuring the WLAN Using Windows Vista . . . . . . . . . . . . . . . . . . . . . 148
Configuring the WLAN Using Windows XP . . . . . . . . . . . . . . . . . . . . . . 149
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
10
Troubleshooting the WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
WLAN Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Using the Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
What is Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Where to Find Information About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 154
Using the FM Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Getting started with the FM Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Using the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Register and Delete a Radio Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Appendix B: Fingerprint Sensor Device
Introducing the Fingerprint Sensor Device . . . . . . . . . . . . . . . . . . . . . . . . 158
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Installing OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Uninstalling OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
User Enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Using OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Configuring OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
OmniPass Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
11
Preface
About This Guide
The LifeBook U820 notebook from Fujitsu Computer Systems Corporation is an ultra-mobile
convertible computer. It can be used either as a standard notebook using keyboard input, or in tablet
configuration using pen input. It is powered by an Intel® Atom™ Z530 processor, has a built-in color
display with a passive digitizer, and brings the computing power of desktop personal computers (PCs)
to a handheld, versatile environment.
This manual explains how to operate your LifeBook U820 notebook’s hardware and pre-installed
system software. Your LifeBook U820 notebook comes with Windows® XP Tablet PC Edition 2005,
Windows Vista® Business, or Windows Vista Home Premium pre-installed.
Conventions Used in the Guide
Keyboard and on-screen keys appear in brackets. Example: [Fn], [F1], [ESC], [ENTER] and [CTRL].
Pages with additional information about a specific topic are cross-referenced within the text.
For example: (“See Installation Procedure on page 43”.) Note that all cross-references are linked to the
referenced items, so by clicking the link, you will automatically go to the referenced item or page.
On-screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”.
12
THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF
THE SUBJECT MATERIAL.
THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR
PLEASE READ ALL CAUTION INFORMATION
CAREFULLY.
COMPUTER, OR TO THE INTEGRITY OF YOUR FILES.
THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR
LIFEBOOK NOTEBOOK, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY.
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
• Toll free: 1-800-8Fujitsu (1-800-838-5487)
• E-mail: 8fujitsu@us.fujitsu.com
• Website: http://www.computers.us.fujitsu.com/support
Before you place the call, you should have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
13 - About This Guide
•
•
•
•
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
Fujitsu Shopping Online
You can go directly to the online by going to the website at: www.shopfujitsu.com.
YOU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE URL LINKS.
Limited Warranty
Your LifeBook U820 ultra-mobile notebook is backed by a Fujitsu International Limited Warranty.
Check the service kit that came with your notebook for the Limited Warranty period and terms and
conditions.
14 - About This Guide
Chapter 1
Getting to Know Your LifeBook
Overview
This section describes the
components of your Fujitsu
LifeBook U820 notebook. We
strongly recommend that you read
it before using your notebook –
even if you are already familiar
with notebook computers.
Figure 1. Fujitsu LifeBook U820 notebook
15
Locating the Controls and Connectors
Connectors and peripheral interfaces on the LifeBook U820 notebook and the optional port replicator
allow you to connect and control a variety of devices. Specific locations are illustrated in Figures 2
through 6. The table below provides a short description of each icon on the LifeBook U820 notebook
and/or optional port replicator. Each of the icons is either molded into or printed on the notebook or port
replicator chassis.
Connection
Notebook
Icon
Purpose
DC in connector
Connect an external power source such as the AC adapter or auto/airline
adapter.
Secure Digital
(SD) Slot
Insert an SD flash memory card for data storage. Flash memory cards
allow you to transfer data to and from a variety of different digital devices.
USB Port
Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the
notebook.
Microphone Jack
Connect an external microphone. The internal microphone is disabled
when you plug in an external microphone.
Headphone Jack
Connect stereo headphones or powered external speakers. The internal
speaker is disabled when you plug in external headphones or powered
speakers.
Suspend/ Resume
button
The Power/Suspend/Resume button allows you to suspend notebook
activity without powering off, resume your notebook from suspend mode,
and power on the system when it has been shut down from Windows.
16 - Locating the Controls and Connectors
Connection
Notebook
Icon
Purpose
Local Area
Network (LAN)
(Available using optional port replicator or with external monitor/LAN
adapter cable only.)
The LAN (RJ-45) jack is used to connect the internal 10/100 Base-T/Tx
Ethernet to a Local Area Network (LAN) in your office or home, or
broadband devices such as a cable modem, DSL, or satellite Internet.
Wireless LAN/
Bluetooth
On-Off Switch
The wireless LAN/Bluetooth switch allows you to turn power to the wireless
LAN device and Bluetooth devices on and off.
External Video
port
(Available using optional port replicator or with external monitor/LAN
adapter cable only.)
The external video port allows you to connect an external monitor or LCD
projector to your computer.
Volume Control
The volume control allows you to increase, decrease, or mute the system
volume.
17 - Locating the Controls and Connectors
Web camera
Built-in Microphone
Pen/Pen Holder
Display Panel
LifeBook Application/
Tablet Buttons
Keyboard Light
Fingerprint Sensor
Speaker
Keyboard Light
Keyboard
Port Replicator or External Monitor/
LAN Adapter Cable Connector
Status Indicator Panel
Figure 2. LifeBook U820 notebook in notebook mode
18 - Locating the Controls and Connectors
Top Components (notebook mode)
The following is a brief description of your LifeBook notebook’s top components when it is in notebook
mode. (See Figure 2 on page 18 for location)
Web Camera
The 1.3 megapixel web camera allows you to take pictures of yourself to send over the internet.
Built-in Microphone
The built-in microphone allows you to input audio.
Pen/Pen Holder
The pen is used as the interface with the display.
Display Panel
The display panel is a color LCD panel with backlighting for the display of text and graphics and passive
digitizer functionality.
LifeBook Application/Tablet Buttons
The LifeBook Application/Tablet buttons provide one-touch application launch capability as well as tabletspecific functions. See “LifeBook Application/Tablet PC Buttons” on page 48.
Fingerprint Sensor
The fingerprint sensor device allows you to log onto your system as well as password-protected websites
and applications by swiping your finger over the sensor. See “Introducing the Fingerprint Sensor Device”
on page 158.
Keyboard Lights
The two keyboard lights allow you to illuminate the keyboard under low-light conditions.
Keyboard
A keyboard with dedicated Windows keys. See “Keyboard” on page 39.
19 - Locating the Controls and Connectors
Status Indicator Panels
The Status Indicator Panels display symbols that correspond with a specific component of your LifeBook
notebook. The indicators above the keyboard relate to the keyboard states, while the indicator panel below
the keyboard relates to power and hard drive access. See “Status Indicator Panel” on page 29
Port Replicator or External Monitor/LAN Adapter Cable Connector
This connector allows you to connect the optional Port Replicator or the adapter cable to your notebook.
Top Components (tablet mode)
The following is a brief description of your LifeBook notebook’s top components when it is in tablet
mode. (See Figure 3 on page 21 for location)
Fingerprint Sensor
The fingerprint sensor device allows you to log onto your system as well as password-protected websites
and applications by swiping your finger over the sensor. See “Introducing the Fingerprint Sensor Device”
on page 158
Ctrl-Alt-Del Button
Holding the button down for approximately two seconds causes it to act as if Ctl-Alt-Del had actually
been entered from a keyboard.
Left Button
This button acts the same as the left button on a mouse.
Right Button
This button acts the same as the right button on a mouse.
20 - Locating the Controls and Connectors
Left Button
Ctrl-Alt-Del
Button
Right Button
Fingerprint
Sensor
Rotation Button
Button 1
Button 2
Down/Page Down
Function (Fn) Button
Up/Page Up
Cursor
Control
Pen/Pen Holder
Figure 3. LifeBook U820 notebook in tablet mode
21 - Locating the Controls and Connectors
Rotation Button
When you press the Rotation button, the system screen orientation changes from portrait (vertical) to
landscape (horizontal) or from landscape to portrait. When you would like to use the Tablet PC as an
eBook, for example, you would use the portrait orientation, when accessing spreadsheets, you would more
typically use a landscape orientation.
Application Buttons 1 and 2
The Application Buttons can be used to automatically open pre-selected applications. These buttons can
also be used with the [Fn] button to perform additional tasks. See “LifeBook Application/Tablet PC
Buttons” on page 48 for more information about using the Application Buttons.
Down and Up Buttons
The Down and Up Buttons can be used to navigate through multiple pages. They can also be used to
automatically open pre-selected applications. When used with the [Fn] button, they can be used to Page
Down and Page Up. See “LifeBook Application/Tablet PC Buttons” on page 48 for more information
about using these buttons.
Function Button
The Function Button is used in conjunction with the other Application and Tablet Buttons to perform
specified tasks such as opening applications or utilities. When pressed twice in succession, the [Fn] button
will open the Fujitsu menu.
Cursor Control
The cursor control is used to move the cursor around the screen.
22 - Locating the Controls and Connectors
Microphone Jack
USB 2.0 Port
Headphone Jack
Anti-Theft Lock Slot
SD Card Slot
Volume Control
Figure 4. LifeBook notebook left-side panel
Left-Side Panel Components
The following is a brief description of your LifeBook notebook’s left-side components.
Microphone Jack
The microphone jack lets you connect an external mono microphone. See “Microphone Jack” on page 80.
Headphone Jack
The headphone jack allows you to connect headphones. See “External Video Port” on page 80.
USB 2.0 Port
The USB 2.0 port allows you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480
Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12 Mbps. See
“Universal Serial Bus Ports” on page 78
23 - Locating the Controls and Connectors
Secure Digital (SD) Card Slot
The Secure Digital (SD) card slot allows you to install an SD card for data storage. This architecture
allows you to transfer data from a variety of different digital devices. See “Inserting an SD Card” on
page 75.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional physical lock down device.
Volume Control
The volume control allows you to increase, decrease, or mute the system volume. See “Controlling the
Volume” on page 47.
24 - Locating the Controls and Connectors
Suspend/Resume Button
Wireless LAN/
Bluetooth Switch
Compact Flash Card Slot
DC Power Jack
Figure 5. LifeBook notebook right-side panel
Right-Side Panel Components
The following is a brief description of your LifeBook notebook’s right-side components.
Wireless LAN/Bluetooth Switch
The wireless LAN/Bluetooth switch is used to turn the WLAN and Bluetooth devices on and off.
Switching the device off when not in use will help to extend battery life. See “Activating the WLAN
Device” on page 147
Compact Flash (CF) Card Slot
Allows you to insert a Compact Flash card. See “Compact Flash (CF) Cards” on page 76
Suspend/Resume Button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off,
resume your LifeBook notebook from sleep mode, and power on your notebook when it has been shut
down from Windows. See “Power/Suspend/Resume Button” on page 63
25 - Locating the Controls and Connectors
DC Power Jack
The DC power jack allows you to plug in the AC adapter to power your LifeBook notebook and charge
the internal Lithium ion battery.
26 - Locating the Controls and Connectors
Lithium ion Battery
Air Vents
Battery Latches
Air Vents
Figure 6. LifeBook notebook bottom panel
Bottom Components
The following is a brief description of your LifeBook notebook’s bottom panel components.
Lithium ion Battery
The battery bay contains the internal Lithium ion battery. It can be unlatched to remove for the battery
when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion
battery. See “Lithium ion Battery” on page 69
27 - Locating the Controls and Connectors
Battery Latches
The battery latches are used to secure the Lithium ion battery in the battery bay.
Air Vents
The air vents allow air to circulate through the system to cool down the components.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO
KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE
PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
DO NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
28 - Locating the Controls and Connectors
NumLk
Charge/
DC In
ScrLk
CapsLk
Hard Drive
Access
Battery Level
Power
Figure 7. Status Indicator Panel
Status Indicator Panel
The Status Indicators display symbols that correspond to specific components of your Fujitsu LifeBook
notebook. The LEDs below each symbol tell you how each of those components is operating. The Status
Indicators are located in two different areas (Figure 7). Keyboard-related indicators are above the
keyboard on the right, and the remaining indicators are below the keyboard on the right. Note that when
the system is in tablet mode, it is not possible to see the keyboard-related indicators; this is fine, since the
keyboard is not accessible when the system is in tablet mode.
29 - Status Indicator Panel
Battery Charge/DC-In Indicator
• Orange, solid: AC adapter and battery are available and system is being charged.
• Green, solid: AC adapter and battery are available and system is fully charged, or AC adapter is
plugged in but battery is not installed.
• Orange, blinking: AC adapter and battery are available and waiting to charge battery (battery is
out of thermal range).
• Off: AC adapter is not plugged in.
Battery Level Indicator
The Battery Level indicators display the charge level of the indicated battery pack, as follows:
Green, solid: Battery is between 51% and 100% charged.
Orange, solid: Battery is between 13% and 50% charged.
Red, solid: Battery is 12% or less charged.
Orange, blinking: Blinks during battery status measurement (Four seconds after the battery is
installed).
• Red, blinking: There is a problem with the battery.
•
•
•
•
• Off: There is no battery installed or the battery has no charge.
•
If the battery pack is installed and the AC adapter is connected while the power is turned off, the
battery level indicator will display the charge level for five seconds after it blinks orange.
• If the AC adapter is not connected or the battery pack is not fully charged when the computer is
switched to sleep mode, the indicator will blink. The LED blinks at the rate of one second on/six
seconds off.
30 - Status Indicator Panel
• Batteries subjected to shocks, vibration or extreme temperatures can be permanently
damaged.
• A shorted battery is damaged and must be replaced.
Hard Drive Access Indicator
The Hard Drive Access indicator glows green when your internal hard drive is being accessed. Note that
flickering is normal.
Power Indicator
The Power indicator glows blue when your system is turned on.
NumLk Indicator - TBD
The NumLk indicator states that the integral keyboard is set in numeric keypad mode.
CapsLock Indicator
The CapsLock indicator states that your keyboard is set to type in all capital letters.
ScrLk Indicator
The ScrLk indicator states that your scroll lock is active.
31 - Status Indicator Panel
Display Cover
Figure 8. Opening the Display Panel
Display Panel
Your LifeBook U820 notebook contains an LCD display panel that is backlit for easier viewing in bright
environments. The convertible design of your notebook allows you to open the display fully, rotate it in a
clockwise direction 180 degrees, and lay it face up on the keyboard. This allows you to use the system as
a tablet, much as you would a pad of paper.
Opening the Display Panel
Lift the display backwards, being careful not to touch the screen with your fingers, until it is at a
comfortable viewing angle. (See Figure 8)
32 - Display Panel
Using the System as a Tablet
If you would like to use the system as a tablet, perform the following steps.
• When putting the system into tablet mode, the display must be rotated in a clockwise direction
only. Be sure to turn it counter-clockwise when returning the system to notebook mode (i.e.,
the reverse of how you turned it when you opened it.) Turning the display in the incorrect
direction could cause hinge damage.
• When lifting the display, be sure to hold the panel at the top center edge.
• In the following step, be sure to position the display perpendicular to the keyboard, otherwise
the keyboard or display cover could get scratched.
Lift the display until it is perpendicular to the keyboard. (Figure 9).
When the display is perpendicular, rotate it 180o in clockwise direction (Figure 10) so that it is facing backwards.
Holding the top edge of the display panel, pull it forward until it is lying flush against the system. You can now
use your system as a tablet. (Figure 11)
To return the system to notebook mode, raise the display until it is perpendicular, then rotate it counter-clockwise.
Figure 9. Fully Open Display
Figure 10. Rotating Display
33 - Display Panel
Figure 11. Tablet Mode
Adjusting Display Panel Brightness
Once you have turned on your notebook, you may want to adjust the brightness level of the screen to a
more comfortable viewing level. There are three ways to adjust the brightness: keyboard, power
management utility, and Fujitsu Menu.
Using Keyboard to Adjust Brightness
Adjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the
function keys automatically changes the brightness settings in the system’s Pen and Tablet Settings).
• [Fn]+[+ / =]: Pressing repeatedly will lower the brightness of your display.
• [Fn]+[" / ']: Pressing repeatedly will increase the brightness of the display.
Using Power Management to Adjust Brightness
To adjust brightness with the power management utility,:
Windows XP: Click Start -> Control Panel. If you are not in Classic View, select it in the left panel.
Double-click the Tablet and Pen Settings icon, then select the Display tab. Set the screen brightness slider
for When plugged in and Powered by batteries scenarios.
Windows Vista: Click Start -> Control Panel. If you are not in Classic View, select it in the left panel.
Double-click the Windows Mobility Center icon, then double-click the icon adjacent to Display
brightness. Set the screen brightness sliders for On battery and Plugged in scenarios.
Using the Fujitsu Menu to Adjust Brightness
Windows XP: To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system
tray in the lower right corner of the screen or press the [Fn] button twice. From the menu that appears,
select Brightness Control. The Tablet and Pen Settings window will open. Select the Display tab and set
the screen brightness slider for battery and AC power scenarios.
Windows Vista: To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system
tray in the lower right corner of the screen or press the [Fn] button twice. Click Windows Mobility Center,
then click the icon adjacent to Display brightness. Set the screen brightness sliders for On battery and
Plugged in scenarios.
34 - Display Panel
IF USING AC POWER, YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT. IF USING
BATTERY POWER, YOUR BRIGHTNESS SETTINGS IS SET TO APPROXIMATELY MID-LEVEL BY DEFAULT.
THE HIGHER THE BRIGHTNESS LEVEL, THE MORE POWER THE TABLET PC WILL CONSUME AND THE
FASTER YOUR BATTERIES WILL DISCHARGE. FOR MAXIMUM BATTERY LIFE, MAKE SURE THAT THE
BRIGHTNESS IS SET AS LOW AS POSSIBLE.
Changing Touch Settings
(Windows Vista only) Touch settings can be optimized to increase the size of certain items in the Windows
user interface such as Start menu items, scroll bars, title bars and taskbars, icons and buttons. These
settings apply only to Windows Vista. In order to optimize the settings, follow the steps below;
Launch Touch Settings: Click [Start] --> All Programs --> Microsoft Origami Experience Pack --> Touch
Settings.
Select Optimize touch settings and click the [OK] button.
Touch settings will be optimized after logging off and logging in again.
Using the Fujitsu Zoom Utility - TBD
Your computer has a handy Fujitsu Zoom utility that lets you toggle the screen resolution between 1024
x 600 resolution and 800 x 600 resolution.
The Fujitsu Zoom utility has a magnifying glass icon in the Windows notification area of the Windows
taskbar. You can zoom in (800 x 600 resolution) or zoom out (1024 x 600 resolution) by right-clicking on
the icon and selecting the appropriate action. You can also assign an application button to zoom in or zoom
out. For example, in order to assign the [Fn] + [Button II] function to the zoom utility, follow the
instructions below.
35 - Display Panel
Button Mapping on Windows XP Tablet PC Edition:
Open the Control Panel, then double-click Tablet and Pen Settings.
Highlight Button II, then click on [Change].
In Program Location, click on [Browse] (do not change Action: Launch an Application).
Change Look In to Local Disk (C:).
Double-click on the Program Files folder, then double-click on the Fujitsu Computer Systems folder.
Double-click on the Fujitsu Zoom Utility folder, then click on FjChgRes.
Press [OK].
Button Mapping on Windows Vista:
Open the Control Panel, then double-click Tablet PC Settings.
Click the Buttons tab, and highlight Fn + Button II, then click [Change].
In Program Location, click on Browse (do not change Press: Start a Program alone).
Double-click on the Program Files folder, then double-click on Fujitsu Computer Systems folder.
Double-click on Fujitsu Zoom Utility folder, then click on FjChgRes.
Click [OK].
36 - Display Panel
Handling the System
Your LifeBook U820 notebook is designed to be handheld, used on a secure surface, or docked in the
optional tablet dock. When holding the notebook, use the following methods for optimal results.
DO NOT USE THE NOTEBOOK ON YOUR LAP. USING IT ON YOUR LAP WILL BLOCK THE AIR VENTS, WHICH
COULD RESULT IN DAMAGE TO THE SYSTEM AND ALSO CAN REDUCE THE RF EXPOSURE SAFETY
DISTANCE DURING RADIO OPERATION.
Using in Notebook Configuration
To use your LifeBook in notebook configuration,
place it on a flat, secure surface or hold it as shown
in Figure 12. Note that when holding the system,
most of the keying will be done with the thumbs,
since the fingers are used to hold the device.
If you hold the system with one hand, grasp it
securely to prevent it from slipping.
Figure 12. Notebook Orientation
Figure 13. Tablet Configuration (landscape mode)
37 - Handling the System
Using in Tablet Configuration
Landscape Mode: To use your LifeBook in tablet
configuration in landscape (horizontal) mode,
first convert it as directed in “Using the System as
a Tablet” on page 33. Hold the system as shown in
Figure13, or place it on a flat, secure surface.
Portrait Mode: To use your LifeBook in tablet
configuration in portrait (vertical) mode, first
convert it as directed in “Using the System as a
Tablet” on page 33. Hold the system as shown in
Figure 13, or place it on a flat, secure surface
Figure 14. Tablet Orientation (portrait mode)
38 - Handling the System
Keyboard
External Display.
Bright (down)
Bright (up)
Function Keys
Numeric Keys
CpsLck
Fn Key
Alt Key
Cursor Keys
Start Key
Figure 15. Keyboard
Using the Keyboard
Your Fujitsu LifeBook notebook has an integral 68-key keyboard. The keys perform all the standard
functions of a 101-key keyboard, including the special function keys. This section describes the special
keys: Your keyboard also has “headlights” that help you to see it under darker conditions.
Start Key
Your LifeBook notebook Start key displays the Start menu. This button functions the same as your
onscreen Start menu button. (Please refer to your Windows documentation for additional information
regarding the Windows keys.)
39 - Keyboard
Cursor Keys
The cursor keys are the four arrow keys on the keyboard which are used in conjunction with the [Fn} key
to allow you to move the cursor up, down, left and right in applications. In programs such as Windows
Explorer, it moves the “focus” (selects the next item up, down, left, or right).
Function Keys
Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ
for each application. You should refer to your software documentation to find out how these keys are used.
Due to the ultra-mobile design of the system and keyboard, some of the functions that are normally
assigned to function keys have been reassigned to other keys, as noted below:
• The [Fn] key provides extended functions for the notebook and is always used in conjunction with
another key.
• [Fn] + [+ / =]: Pressing repeatedly will lower the brightness of your display.
• [Fn] + [" / ']: Pressing repeatedly will increase the brightness of the display.
• [Fn] + [_ / -]: Pressing the [_ / -] key while holding [Fn] allows you to change your selection of
where to send your display video. Each time you press the combination of keys you will step to the
next choice. The choices, in order, are: built-in display panel only, external monitor only, and both
built-in display panel and external monitor.
Keyboard Lights
Your keyboard has a pair of lights which help you to se the keyboard under darker conditions. The lights
are located just behind the keyboard. To turn the lights on and off, please refer to “Button 1: Keyboard
Lights / Application A” on page 49.
40 - Keyboard
Using the Cursor Buttons
Right Button
Scroll Button (down)
Left Button
Scroll Button (up)
Cursor Control
Figure 16. Cursor Buttons (shown in Tablet mode)
The button array across the top of your LifeBook notebook is used to control the movement of the cursor
and to select items on your display panel. The buttons consist of a cursor control at the top right, left and
right buttons on the top left, and scroll buttons adjacent to the cursor control.
The cursor control works the same way a mouse does by moving the cursor around the display. It only
requires light pressure with the tip of your finger, and the more pressure you use, the faster the cursor will
move. Note that the cursor control can be used in the same manner as the left button; first use it to position
the cursor, then tap on it to activate your selection.
The left button functions the same as a left mouse button while the right button has the same function as
a right mouse button. The scroll buttons allow you to scroll up and down a screen. The actual functionality
of the buttons may vary depending on the application that is being used and how they are assigned in the
Tablet PC Settings utility in the Control Panel.
41 - Using the Cursor Buttons
Clicking
Clicking means pushing and releasing a
button. To left-click, move the cursor to the
item you wish to select, press the Left
button once, and then immediately release
it. You can also left-click by moving the
cursor to the item you wish to select, then
tapping the cursor control once. To rightclick, move the cursor to the item you wish
to select, press the Right button once, and
then immediately release it.
Figure 17. Clicking
Double-Clicking
Double-clicking means quickly pushing
and releasing the left button twice. This
procedure does not function with the right
button. To double-click, move the cursor to
the item you wish to select, then press and
release the left button twice. You can also
double-click by moving the cursor to the
item you wish to select, then doubletapping the cursor control.
Figure 18. Double-clicking
• IF THE INTERVAL BETWEEN CLICKS IS TOO LONG, THE DOUBLE-CLICK WILL NOT BE EXECUTED.
• PARAMETERS FOR THE BUTTONS CAN BE ADJUSTED FROM THE MOUSE DIALOG BOX LOCATED IN THE
WINDOWS CONTROL PANEL.
42 - Using the Cursor Buttons
Dragging
Dragging means pressing and holding the
left button, while moving the cursor
control. To drag, move the cursor to the
item you wish to move. Press and hold the
left button while moving the item to its new
location and then release it.
Figure 19. Dragging
Scrolling
Use the Scrolling buttons to navigate
through a document quickly without using
the window scroll bars. This is particularly
useful when you are navigating through
on-line pages. To scroll, press and hold the
scroll up or scroll down button, depending
upon which direction you want to scroll.
Scroll down
Scroll up
Figure 20. Scrolling
Button Control Adjustment
Going to Control Panel > Mouse allows you to customize your cursor buttons with selections made via the
Mouse Properties dialog box. There are four aspects of button operation that you can adjust:
• Buttons: This tab lets you set up the buttons for right or left handed operation, in addition to setting
up the time interval allowed between clicks in double-clicking.
• Pointers: This tab lets you set up the scheme for the cursor depending on its functionality.
• Pointer Options: This tab lets you set up a relation between the speed of your finger motion and
the speed of the cursor. It also allows you to enable a Pointer Trail for the cursor arrow.
• Stick: This tab allows you to change the cursor control speed and functionality.
43 - Using the Cursor Buttons
Using the Touch Screen
The integrated Touch Screen allows
you to use the included stylus as a
pointing device. You can use the
stylus to click, double-click, drag
items and icons, or to draw like a
pen or pencil in applications that
support this behavior, such as
drawing or painting programs. See
the documentation that came with
your application for details.
Figure 21. Using the touch screen
• DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS.
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH SCREEN.
• TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT FUJITSU’S ACCESSORIES WEBSITE
AT: WWW.SHOPFUJITSU.COM.
44 - Using the Touch Screen
Clicking on Touch Screen
To left-click, touch the object you wish to select and
then lift the stylus tip immediately.
Right-Clicking on Touch Screen
Windows Vista
Right-click can be accomplished by holding the pen
down until a circular icon appears. To change the
settings for the right-click feature, go to Start >
Control Panel > Pen and Input Devices. In the Pen
Options tab, select Press and Hold then click the
[Settings] button.
Figure 22. Clicking on the touch screen
Windows XP Tablet PC Edition:
Right-click can be accomplished by holding the pen down until a circular icon appears. To change the
settings for the right-click feature, go to Start > Control Panel > Tablet and Pen Settings. In the Pen
Options tab, select Press and Hold then click the [Settings] button.
Double-Clicking
To double-click, touch the item twice, and then
immediately remove the stylus tip.
Figure
23.
Double-clicking on the touch screen
45 - Using the Touch Screen
Dragging
Dragging means moving an item with the stylus by
touching the screen, moving and then lifting the stylus.
To drag, touch the Touch Screen with your stylus on
the item you wish to move. While continuing to touch
the screen with the stylus, drag the item to its new
location by moving the stylus across the screen, and
then lifting the stylus to release it. Dragging can also
be done using your fingertip.
Figure 24. Dragging on the touch screen
Calibrating the Touch Screen
In order to ensure accurate tracking between the stylus and cursor, you must run the Tablet Calibration
utility before you use the Touch Screen for the first time, or after you change the display resolution.
To run the calibration utility:
Go to Start -> Control Panel. If you are not in Classic View, select Switch to Classic View in the left panel.
Double-click the Tablet Calibration icon.
Adjust the display of your notebook to a comfortable angle.
DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH PANEL.
WHEN USING THE STYLUS TO CALIBRATE THE SCREEN, BE SURE TO AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS; DOING SO COULD RESULT IN FAULTY CALIBRATION.
Touch the stylus to various points on the screen to verify that the screen is correctly calibrated.
46 - Using the Touch Screen
Volume Control
Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other.
ANY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN. IF
YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL, THE
HARDWARE VOLUME CONTROL AND THE SOFTWARE VOLUME CONTROL WILL INTERACT WITH EACH
OTHER. IT SHOULD BE NOTED THAT IF YOU SET YOUR SOFTWARE VOLUME TO
OFF, YOU WILL OVERRIDE
THE EXTERNAL VOLUME CONTROL SETTING.
Controlling the Volume
The volume can be controlled in several different ways:
• Volume can be controlled using the
volume dial on the left side of the
system (Figure 25). To change the
volume, simply rotate the dial. You can
also mute the sound by pressing the dial
towards the system.
• Volume can be changed or muted from
within the Volume Control in the system
tray.
• Volume can be controlled by many
volume controls that are set within
individual applications.
Volume dial
Figure 25. Volume Dial
• Certain external audio devices you connect to your system may have hardware volume controls.
Each source discussed above puts an upper limit on the volume level that must then be followed by the
other sources. We recommend that you experiment with the various volume controls to discover the
optimal sound level.
47 - Volume Control
Rotation
Button 1
Button 2
Function
Down
Up
Ctl-Alt-Del Button
Figure 26. LifeBook U820 Notebook Application/Tablet PC Buttons
LifeBook Application/Tablet PC Buttons
A unique feature of your LifeBook U820 notebook is the array of Application and Tablet PC buttons.
These buttons allow you to launch specific applications and functions with the touch of a button.
Button functions
All seven buttons can be used after logging on to Windows. Four of the buttons have secondary functions.
See Table 1 for information about each of the post-logon functions.
NOTE THAT IT IS NOT NECESSARY TO PRESS THE [FN] BUTTON SIMULTANEOUSLY WITH THE
APPLICATION/TABLET BUTTON; ONCE YOU PRESS AND RELEASE THE [FN] BUTTON, IT WILL REMAIN
ACTIVE UNTIL YOU HAVE PRESSED THE DESIRED APPLICATION/TABLET BUTTON.
48 - LifeBook Application/Tablet PC Buttons
Button 1: Keyboard Lights / Application A
When you press Button 1, each press of the button will toggle the keyboard lights on and off.
When you press the [Fn] button then press and release Button 1, you will automatically start whichever
program is assigned to the button. The default application for this button is the Power Saving Utility. See
“Changing Tablet PC Button Functions” on page 51 to select a different application for this button.
Button
Name/Icon
Primary Notebook Function
Secondary Functions (Fn + Button)
Button 1
Keyboard Lights On/Off
Default = Power Saving Utility, or,
User-defined Application A (
Button 2
On-Screen Keyboard
Default = Windows Journal, or,
User-Defined Application B
Down
Page Down
Page Up
Up
Page Up
Rotation
Screen Rotation
Display Switching: 1. LED only, 2. CRT only, 3. Dual Display
Function
Secondary Function Selection
Fujitsu Menu Utility
Ctl+Alt+Del Button
None
Page Down
Ctl-Alt-Del
Table 1. Post-logon Tablet PC Button Functions
49 - LifeBook Application/Tablet PC Buttons
Button 2: On Screen Keyboard / Application B
When you press Button 2, each press of the button will toggle the on-screen keyboard on and off. When
you press the [Fn] button then press and release Button 2, you will automatically start whichever program
is assigned to the button. The default application for this button is Microsoft Journal. See “Changing
Tablet PC Button Functions” on page 51. to select a different application for this button.
Down / Page Down Button
When you press the Down button, you will scroll down a page for quicker navigation. When you press the
[Fn] button then press and release the Down button, you will jump to the next page. This allows you to
navigate quickly through large documents. See “Changing Tablet PC Button Functions” on page 51. to
select a different function for this button.
Up / Page Up Button
When you press the Up button, you will scroll up a page for quicker navigation. When you press the [Fn]
button then press and release the Up button, you will jump to the previous page. This allows you to
navigate quickly through large documents. See “Changing Tablet PC Button Functions” on page 51. to
select a different function for this button.
Screen Rotation / Display Switching Button
The screen rotation feature would normally be used only when the system is configured as a tablet. When
you would like to use the tablet as an eBook, for example, you would use the portrait orientation; when
accessing spreadsheets or using the system as a notebook, you would more typically use landscape
orientation.
When the system is changed to tablet configuration, the orientation automatically changes to portrait mode
by default.
THE SCREEN ORIENTATION DEFAULT CAN BE CHANGED BY GOING TO THE CONTROL PANEL (IN CLASSIC
VIEW) AND DOUBLE-CLICKING ON TABLET AND PEN SETTINGS (IN WINDOWS XP) OR TABLET PC
SETTINGS (WINDOWS VISTA) AND SELECTING THE DESIRED SETTINGS IN THE DISPLAY PROPERTIES.
AFTER CHANGING THE SETTINGS, SAVE THEM IN FUJITSU TABLET CONTROLS.
50 - LifeBook Application/Tablet PC Buttons
When you press the [Screen Rotation / Display Switching] button, the system screen orientation changes
from portrait (vertical) to landscape (horizontal) or from landscape to portrait.
Pressing the [Fn] button while pressing the [Screen Rotation] button will switch the display output in the
following order: built-in display only, external display only, dual display.
Function / Fujitsu Menu Utility Button
The [Function] button works in conjunction with the other application buttons to provide additional
functionality for the buttons. Refer to specific details above.
Pressing the [Fn] button twice in succession causes the Fujitsu Menu Utility to appear on your screen,
allowing you to modify certain system settings.
Ctl+Alt+Del Button
Pressing and holding the [Ctl-Alt-Del] button for up to 750 milliseconds launches the Logon screen or the
Windows Task Manager.
Changing Tablet PC Button Functions
Button 1 and Button 2 can be changed to launch a program or perform an action you select. By default,
Button 1 launches the Power Saving Utility, and Button 2 launches MS Journal.
To launch different applications or cause the buttons to perform a specific action:
Windows XP:
Double-click on the Tablet and Pen Settings icon in the Control Panel.
Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.
Select the Tablet Buttons tab and select the button you would like to change from the list.
Click [Change] and open the drop down list in the Action: field.
Select the action you would like the button to perform. If you want to launch a program, click on Launch an
Application then browse to the location of the program.
51 - LifeBook Application/Tablet PC Buttons
Windows Vista:
Double-click on the Tablet PC Settings icon in the Control Panel.
Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.
Select the Buttons tab and select the button you would like to change from the list.
Click [Change] and open the drop down list in the Press: field.
Select the action you would like the button to perform. If you want to launch a program, click on Launch an
Application then browse to the location of the program.
Precautions
Opening and Closing the Cover
By default, closing the cover automatically places your system into Sleep mode.
Windows XP systems:
You can change the action the system takes when the cover is closed by opening the Power Options
Properties icon in the Control Panel, and selecting the Advanced tab. Make a choice from the drop down
menu for When I close the lid of my portable computer and click the [OK] button.) Normally, opening
the cover does not automatically place the notebook into normal operation. Instead, you must enter the
proper security password after pushing the Power/Suspend/Resume button. If you prefer, you can have the
system resume automatically (without the password) when you press the power button by unchecking the
Prompt for password when computer resumes from standby in the Advanced tab.
Windows Vista systems:
To change the default for Windows Vista systems when the cover is closed:
Open the system Control Panel.
If the display is in Category view, click Change battery settings under the Mobile PC category. If it is in Classic
view, click Power Options.
Click Choose what closing the lid does in the left pane.
Select the desired action for When I close the lid, then click the [Save changes] button.
52 - LifeBook Application/Tablet PC Buttons
Chapter 2
Getting Started with Your LifeBook
Power Sources
Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC
adapter or an optional Auto/Airline adapter.
Connecting the Power Adapters
The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and
charging the batteries.
Connecting the AC Adapter
1 Plug the DC output cable into the DC power jack of your LifeBook notebook (Figure 27).
2 Plug the AC adapter into an AC electrical outlet.
Connecting the Optional Auto/Airline Adapter
1 Plug the DC output cable into the DC power jack on your notebook.
2 Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Access
OR
Plug the Auto/Airline adapter into the DC power jack on an airplane seat.
53
Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power
Be sure that you have at least one charged battery installed.
Remove the AC adapter or the Auto/Airline adapter.
THE LITHIUM ION BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT
AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR NOTEBOOK.
EITHER THE
AC Adapter
Figure 27. Connecting the AC Adapter
54 - Power Sources
Starting Your LifeBook Notebook
Power On
Power/Suspend/Resume Button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off,
resume your LifeBook notebook from sleep mode, and power on your notebook when it has been shut
down from Windows.
WHEN YOU TURN ON YOUR LIFEBOOK NOTEBOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS
THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE
ADAPTER IS CONNECTED AND HAS POWER.
To turn on your LifeBook notebook from its off state, push the Power/Suspend/Resume button (located
on the right side of the system) towards the back of the system (See figure 5 on page 25 for location). When you are
done working you can either leave your notebook in Suspend mode, See “Sleep Mode” on page 64 or you
can turn it off. See “Powering Off” on page 66.
DO NOT CARRY YOUR LIFEBOOK NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS
OR VIBRATION, AS YOU RISK DAMAGING YOUR NOTEBOOK.
When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit an
audio warning and/or an error message will be displayed. See “Power On Self Test Messages” on page 95.
Depending on the nature of the problem, you may be able to continue by starting the operating system or
by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your notebook will load your operating system.
55 - Starting Your LifeBook Notebook
NEVER TURN OFF YOUR LIFEBOOK NOTEBOOK DURING THE POWER ON SELF TEST (POST) OR IT WILL
CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK NOTEBOOK ON THE
NEXT TIME. See “Power On Self Test Messages” on page 95.
Boot Sequence
The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’s
BIOS. When your LifeBook notebook is first turned on, the main system memory is empty, and it needs
to find instructions to start up your notebook. This information is in the BIOS program. Each time you
power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until
your operating system is loaded. During booting, your notebook is performing a standard boot sequence
including a Power On Self Test (POST). When the boot sequence is completed without a failure and
without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.
The boot sequence is executed when:
• You turn on the power to your LifeBook notebook.
• You restart your notebook from the Windows Shut Down dialog box.
• The software initiates a system restart. Example: When you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This
feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about
accessing the utility.
REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND SUPERVISOR HARD DISK
FUJITSU COMPUTER SYSTEMS WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND
HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE.
PASSWORDS,
56 - Starting Your LifeBook Notebook
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook notebook.
Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change
the BIOS’ environment to operate your notebook.
The BIOS Setup Utility configures:
• Device control feature parameters, such as changing I/O addresses and boot devices.
• System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following (or use the TrustedCore Menu, as detailed below):
Turn on or restart your LifeBook notebook.
Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the following menus and information screens:
•
•
•
•
•
•
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
57 - Starting Your LifeBook Notebook
Clicking on any of the fields will invoke the screen, information, or action described.
The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the screen.
BIOS Guide
A guide to your notebook’s BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select User’s Guides under Online Support. Select
your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.
Booting the System
We strongly recommend that you not attach any external devices until you have gone through the initial
power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.
Depending upon your operating system (Windows Vista or XP edition), there is a different procedure for
starting your system for the first time, as outlined below.
Starting Windows Vista the first time
• THE FIRST TIME YOU INITIALIZE YOUR WINDOWS VISTA SYSTEM, THE SCREEN WILL BE BLANK FOR
APPROXIMATELY TWO MINUTES. THIS IS NORMAL. AFTER INITIALIZATION, A “SET UP WINDOWS” DIALOG
BOX WILL APPEAR.
• IMPORTANT: DURING THE SETUP PROCEDURE, DO NOT DISCONNECT THE POWER SUPPLY, PRESS ANY
BUTTONS, OR USE ANY PERIPHERAL DEVICES SUCH AS A MOUSE, KEYBOARD, OR REMOTE CONTROL.
• THE FIRST TIME YOU INITIALIZE YOUR WINDOWS VISTA SYSTEM, YOU MAY BE ASKED TO SELECT YOUR
LANGUAGE.
BE SURE TO SELECT THE CORRECT LANGUAGE THE FIRST TIME, OTHERWISE IT WILL BE
NECESSARY TO RESTORE YOUR SYSTEM USING THE RESTORE MEDIA.
In order to ensure that you receive the most benefits from the Windows Vista operating system, it should
be registered the first time you use it.
58 - Starting Your LifeBook Notebook
1
First of all, you will need to read and accept the End User License Agreements (EULAs).
• IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE
LICENSE AGREEMENTS FOR INFORMATION ON RETURNING TO
WINDOWS OR TO SHUT DOWN YOUR
LIFEBOOK NOTEBOOK.
• YOU CANNOT USE YOUR NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENTS. IF YOU
STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME
PROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
You will be prompted to enter your User Name and Password and you will be given a chance to select an
icon for your account.
The next screen asks for a Computer Name and allows you to choose a desktop background.
On the next screen set your time and date settings.
The "Thank you" screen appears, followed by several screens while Windows checks the system performance.
You will next see a "Help protect Windows automatically" screen in which the default choice is "Use
recommended settings”. The other two choices are "Install important updates only" and "Ask me later". Select
from the three choices.
You will next see the "Select your computer's current location" screen. Make your selection from Home, Work
(Default), and Public location.
Windows will then boot up for the first time. As noted above, the first time you initialize your Windows Vista
system, the screen will be blank for approximately two minutes. This is normal. During this period, do not
disconnect the power supply, press any buttons, or use any peripheral devices such as mouse, keyboard, or
remote control.
Registering Windows Vista with Microsoft
After Windows has booted up for the first time, the Control Panel Welcome Center will appear. If the Register
Windows Online icon is not seen in the window, click on Show all xx items (where “xx” is the number of topics
in the Welcome Center).
Click on Register Windows Online and follow the instructions that appear to register your copy of Windows.
59 - Starting Your LifeBook Notebook
Starting Windows XP the First Time
Registering Windows XP with Microsoft
In order to ensure that you receive the most benefits from the Windows operating system, it should be
registered the first time you use it.
After you receive the Windows Welcome screen, you will be prompted to enter registration information
in the following order.
First of all, you will need to read and accept the End User License Agreements (EULAs). After accepting
the EULAs, you will be asked if you want to enable the Automatic Updates feature. Acceptance of this
feature is recommended because it allows your system to be updated automatically whenever an important
change becomes available for your notebook.
• IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENT YOU WILL BE ASKED TO REVIEW THE LICENSE
AGREEMENT FOR INFORMATION ON RETURNING
WINDOWS OR TO SHUT DOWN YOUR NOTEBOOK.
• YOU CANNOT USE YOUR LIFEBOOK NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE
AGREEMENT. IF YOU STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE
WINDOWS WELCOME PROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
Several additional windows will appear, prompting you to enter a name and description for your computer,
an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in
the information as directed.
You will then be automatically connected to the Internet, if you have an appropriate connection available.
If an automatic connection is not possible, you will be asked about how you dial out from where you will
be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later
time, you may click the [Skip] button.
Once you are connected to the Internet, you will be asked if you wish to continue with the registration. If
you select [Yes] you will then enter your name and address, and email address if desired. Click [Next] to
complete registration.
60 - Starting Your LifeBook Notebook
Registering Your LifeBook notebook with Fujitsu
You will need to be set up with an Internet Service Provider (ISP) to register online. You can register your
LifeBook by going to our website at: us.fujitsu.com/computers
Installing ClickMe!
ClickMe!
BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN SWITCH IS TURNED ON.
Windows Vista Systems
The first time you boot up your system, you will see a “Primary Settings for the PC” window. This window
explains the installations which will be performed by the Click Me! utility. If you click [Execute],
ClickMe! will begin installing. If after clicking the button you receive a “User Account Control” window,
you will be asked for your permission to continue. Click [Continue] to continue. If you cancel the
operation, the ClickMe! icon will appear on your desktop for later installation.
Windows XP Systems
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. We highly
recommend that you install the ClickMe! utility the first time you boot up. When you click the Click
Me! icon, your system will automatically create the related icons in the system tray in the bottom right of
the screen. These icons provide links to utilities that you will frequently access, such as wireless LAN
software provided by the wireless LAN manufacturer.
IN ADDITION TO THE UTILITIES AND APPLICATIONS INSTALLED BY CLICKME!, OTHER THIRD-PARTY
CDS/DVDS.
APPLICATIONS MAY NEED TO BE INSTALLED FROM THE INCLUDED
61 - Starting Your LifeBook Notebook
Fujitsu Driver Update Utility
Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can
choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For
more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on
page 105.
62 - Starting Your LifeBook Notebook
Power Management
Your LifeBook notebook has many options and features for conserving battery power. Some of these
features are automatic and need no user intervention. However, others depend on the parameters you set
to best suit your operating conditions, such as those for the display brightness. Internal power management
for your notebook may be controlled from settings made in your operating system, pre-bundled power
management application, or from settings made in BIOS setup utility.
PLEASE NOTE THAT “STANDBY MODE” IN WINDOWS XP IS KNOWN AS “SLEEP MODE” IN WINDOWS
VISTA. THE TWO TERMS ARE INTERCHANGEABLE. FOR PURPOSES OF THIS DOCUMENT, “SLEEP MODE”
WILL BE USED.
Besides the options available for conserving battery power, there are also some things that you can do to
prevent your battery from running down as quickly. For example, you can create an appropriate power
saving profile, put your notebook into Sleep mode when it is not performing an operation, and you can
limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off
between performance and power savings.
Power/Suspend/Resume Button
When your notebook is active, the Power/Suspend/Resume button can be used to manually put the
notebook into Sleep mode. Push the Power/Suspend/Resume button when the notebook is active, but not
actively accessing anything, and immediately release the button.
If your notebook is suspended, pushing the Power/Suspend/Resume button returns your notebook to
active operation. You can tell whether the system is Suspended by looking at the Power indicator. If the
indicator is visible and not flashing, your notebook is fully operational. If the indicator is visible and
flashing, your notebook is in Sleep mode. If the indicator is not visible, the power is off or your notebook
is in Hibernation mode. (See Hibernation Feature)
63 - Power Management
Sleep Mode
Sleep mode in Windows saves the contents of your system memory during periods of inactivity by
maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal
components except those necessary to maintain system memory and for restarting.
Your notebook can be put in Sleep mode by:
• Pressing the Power/Suspend/Resume button when your system is turned on.
• Selecting Sleep (“Standby” in Windows XP) from the Windows Shut Down menu.
• Timing out from lack of activity.
• Allowing the battery to reach the Dead Battery Warning condition.
System memory typically stores the files on which you are working, open application information, and
any other data required to support operations in progress. When you resume operation from Sleep, your
system will return to where it left off. You must use the Power/Suspend/Resume button to resume
operation, and there must be an adequate power source available, or your notebook will not resume.
■
IF RUNNING YOUR NOTEBOOK ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE
WHILE YOUR NOTEBOOK IS IN SLEEP MODE, THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL.
■
DISABLING THE POWER/SUSPEND/RESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO
SLEEP OR HIBERNATION (SAVE-TO-DISK) MODE. THE BUTTON RESUME FUNCTION CAN’T BE DISABLED.
■
THE SLEEP OR HIBERNATION (SAVE-TO-DISK) MODE SHOULD NOT BE USED WITH CERTAIN PC CARDS. CHECK
YOUR PC CARD DOCUMENTATION FOR MORE INFORMATION. WHEN PC CARDS OR EXTERNAL DEVICES ARE IN
USE, HIBERNATION (SAVE-TO-DISK) MODE CANNOT RETURN TO THE EXACT STATE PRIOR TO SUSPENSION,
BECAUSE ALL OF THE PERIPHERAL DEVICES WILL BE RE-INITIALIZED WHEN THE SYSTEM RESTARTS.
■
IF YOUR NOTEBOOK IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE SLEEP OR HIBERNATION MODE,
CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING SLEEP
MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING HIBERNATION MODE.
THE MAIN ADVANTAGE OF USING HIBERNATION (SAVE-TO-DISK) IS THAT POWER IS NOT REQUIRED TO MAINTAIN
YOUR DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR NOTEBOOK IN A SUSPENDED STATE
FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT LENGTHENS THE
POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES.
64 - Power Management
Hibernation (Save-to-Disk) Feature
The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part
of the Power/Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
Windows XP: The default settings are not enabled. To enable or disable the Hibernation feature follow
these steps:
From the Start menu, select Settings, and then select Control Panel.
From the Control Panel select Power Options.
Select the Hibernate tab. Select the box to enable or disable this feature.
Windows Vista: The default settings are not enabled. To enable or disable the Hibernation feature, follow
these steps:
From the Start menu, select Control Panel > Power Options.
Select Choose what the power button does or Choose what closing the lid does, then make your selection
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows Power Management
The Power Options icon in the Windows Control Panel allows you to configure some of the power
management settings. For example, you can use Power Options to set the timeout values for turning off
the display and hard disks whether you are running the notebook on battery or one of the adapters.
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows Vista:
Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
Select Restart from the list.
65 - Power Management
Windows XP:
Click the [Start] button, and then click Shut Down...
Select the Restart option. Your notebook will shut down and then reboot.
TURNING OFF YOUR LIFEBOOK NOTEBOOK WITHOUT EXITING WINDOWS OR TURNING ON YOUR
NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN
YOU START THE NEXT TIME.
Powering Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off
the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down
without error, use the Windows shut down procedure.
BE SURE TO CLOSE ALL FILES AND EXIT ALL APPLICATIONS PRIOR TO TURNING OFF THE POWER. IF
FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL LOSE ANY CHANGES THAT HAVE NOT
BEEN SAVED, AND MAY CAUSE DISK ERRORS.
Using the correct procedure to shut down from Windows allows your notebook to complete its operations
and turn off power in the proper sequence to avoid errors. The proper sequence is:
Windows Vista:
Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the righthand pane. Select Shut Down from the list.
Windows XP:
Click the [Start] button, click Shut Down..., and then select the Shut Down option.
66 - Power Management
If you are going to store your notebook for a month or more, see Care and Maintenance Section.
ENERGY STAR® Compliance
Your Fujitsu system is an ENERGY STAR® qualified mobile PC. By choosing a computer
with the latest energy-saving technology, you’re helping to preserve our environment for
future generations.
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S.
Department of Energy, Natural Resources Canada, and other governments around the world
helping us save money while protecting the environment through energy efficient products
and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to
offering solutions that help consumers conserve energy and improve the quality of our environment.
Sleep Mode:
You will notice that your computer is initially set so that the display goes into Sleep mode after 15 minutes
of user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When going
into Sleep mode, the computer also reduces the speed of any active Ethernet network links. To “wake” the
computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment –
saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the
environment. Did you know that the average house can be responsible for twice the greenhouse gas
emissions as the average car? That’s because every time you flip on a light switch, run your dishwasher,
or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So
the more energy we can save through energy efficiency, the more we help to reduce greenhouse gases and
the risks of global warming.
To learn more about the important ENERGY STAR program, visit: www.energystar.gov.
67 - Power Management
To read about how Fujitsu is supporting Sustainable Management along with several other environmental
activities, visit the Fujitsu Corporate Citizenship page at:
http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php
68 - Power Management
Chapter 3
User-Installable Features
Lithium ion Battery
Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when
no external power source is available. The battery is durable and long lasting, but should not be exposed
to extreme temperatures, high voltages, chemicals or other hazards.
The Lithium ion battery operating time may become shorter if it is used under the following conditions:
• When used at temperatures that exceed a low of 5°C or a high of 35°C. Extreme temperatures not
only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the
Status Indicator panel will flash when you try to charge a battery that is outside its operating
temperature range.
• When using a high current device such as an external optical drive or the hard drive, using the AC
adapter will conserve your battery life.
DO NOT LEAVE A FAULTY BATTERY IN YOUR NOTEBOOK. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL
AUTO/AIRLINE ADAPTER, ANOTHER BATTERY OR YOUR NOTEBOOK ITSELF. IT MAY ALSO PREVENT
OPERATION OF YOUR NOTEBOOK BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY.
69
•
BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER
MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. OPTICAL DRIVE
OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE.
THE BATTERY
CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW
QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE.
• UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING
THEM IN THE TRASH.
PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES
PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING
OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT
YOUR SUPPORT REPRESENTATIVE AT
1-800-8FUJITSU (1-800-838-5487)
Recharging the Batteries
If you want to know the condition of the Lithium ion battery, check the Battery Level indicator located on
the Status Indicator panel. The indicator changes as the battery level changes.
The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge
the battery make sure the battery that needs to be charged is installed in your LifeBook notebook and
connect the AC or Auto/Airline adapter.
MAKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON
STATUS INDICATOR PANEL.
THE
There is no memory effect on the Lithium ion battery, therefore you do not need to discharge the battery
completely before recharging. The charge times will be significantly longer if your notebook is in use
while the battery is charging. If you want to charge the battery more quickly, put your notebook into Sleep
mode, or turn it off while the adapter is charging the battery. (See Power Management on page 63 for more
information on Sleep mode and shutdown procedure)
70 - Lithium ion Battery
USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT
CHARGING COMPLETELY.
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond to
the low battery message, the batteries will continue to discharge until they are too low to operate. When
this happens, your notebook will go into Sleep mode. There is no guarantee that your data will be saved
once the notebook reaches this point.
■
ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT
LIFEBOOK NOTEBOOK INTO SLEEP MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD
PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE.
YOUR
■
WHEN YOU ARE IN SLEEP MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU
LIFEBOOK NOTEBOOK IS IN SLEEP MODE, ANY DATA THAT HAS NOT
BEEN SAVED TO THE HARD DRIVE WILL BE LOST.
REMOVE ALL POWER SOURCES WHILE YOUR
Dead Battery Suspend mode shows on the Status indicator just like the normal Sleep mode. Once your
notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide
a source of power either from an adapter, or a charged battery. Once you have provided power, you will
need to press the Power/Suspend/Resume button to resume operation.
In Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not
provided promptly, the Power indicator will stop flashing and go out, meaning you have lost the data that
was not stored. Once you provide power, you can continue to use your notebook while an adapter is
charging the battery.
71 - Lithium ion Battery
Shorted Batteries
The Status Indicator panel indicator associated with the Battery Level indicator displays the operating
level available in that battery. If this display shows a flashing red LED, it means the battery is damaged
and must be replaced so it does not damage other parts of your LifeBook notebook.
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps (Figure 28):
Have a charged battery ready to install.
Shut down your notebook and disconnect the AC adapter.
While pushing the battery bay release latches as shown, slide the battery out of the bay.
Insert a new battery into the bay, and press it in firmly so that the latch clicks into place.
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT
USE AN
AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
Plug an AC Adapter into the system and connect it to a power outlet.
72 - Lithium ion Battery
Battery Pack
Battery Bay Release Latches
Figure 28. Removing a Battery
Follow steps 3 through 6 in “Cold Swapping Batteries”.
IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR
NOTEBOOK OR CHARGE YOUR BATTERY.
73 - Lithium ion Battery
SD Card
Figure 29. Installing a Secure Digital Card
Secure Digital (SD) Cards
Your LifeBook notebook supports Secure Digital (SD) cards, on which you can store and transfer data to
and from a variety of digital devices. These cards use flash memory architecture, which means they don’t
need a power source to retain data.
Secure Digital is a flash memory technology that allows portable storage among a variety of devices, such
as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery
consumption.
74 - Secure Digital (SD) Cards
Inserting an SD Card
SD Cards are inserted in the SD Card slot. To install an SD Card, follow these steps:
INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR
BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
See your specific card manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
Insert your card into the slot with the product label facing up.
Push the card firmly into the slot until it is seated in the connector.
Removing an SD Card
To remove an SD Card, follow these easy steps:
SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME
CARDS MAY REQUIRE YOUR LIFEBOOK NOTEBOOK TO BE IN SLEEP MODE OR OFF WHILE REMOVING
THEM.
Left-click Safely Remove Hardware from the system tray, then select the device to remove.
Push the SD Card in until it unlatches. It will then eject from the slot for removal.
75 - Secure Digital (SD) Cards
CF Slot Plug
CF Card
Figure 30. Removing CF Card Slot Plug
Figure 31. Inserting CF Card
Compact Flash (CF) Cards
Your Fujitsu LifeBook notebook supports Compact Flash (CF) cards, which can perform a variety of
functions.
Some available Compact Flash Cards include:
• Memory cards
• Fax/data modem cards
• Local area network (LAN) cards
For further information, refer to the instructions supplied with your CF Card.
76 - Compact Flash (CF) Cards
Inserting Compact Flash Cards
Compact Flash Cards are inserted in the Compact Flash Card slot. To insert a Compact Flash Card:
• INSERTING OR REMOVING A COMPACT FLASH CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN
OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR NOTEBOOK.
• DO NOT INSERT A COMPACT FLASH CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE
ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR
LIFEBOOK NOTEBOOK, OR BOTH.
See your Compact Flash Card manual for specific instructions on the insertion of your card. Some Compact
Flash Cards may require your notebook to be Off while inserting them.
When you receive your LifeBook, there will be a protective plug inserted in the slot (Figure 30). Whenever you
don’t have a Compact Flash Card inserted, be sure to replace the plug to prevent system contamination. To
remove the plug, simply pull it out from the slot.
Insert your Compact Flash Card into the slot, with the product label facing up (Figure 31).
Push the card into the slot firmly until it is seated in the opening.
Removing Compact Flash Cards
To remove a Compact Flash Card, follow these easy steps:
WINDOWS HAS A SHUTDOWN PROCEDURE FOR COMPACT FLASH CARDS THAT MUST BE FOLLOWED
BEFORE REMOVING A CARD. (PLEASE REVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT
PROCEDURE). IT IS GOOD PRACTICE TO REMOVE DEVICES USING THE SAFELY REMOVE HARDWARE
ICON IN THE SYSTEM TRAY.
See your Compact Flash Card manual for specific instructions on removing your card. Some Compact Flash
Cards may require your notebook to be in Sleep Mode or Off while removing them.
IF THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED, YOU MUST SAVE ALL OF YOUR
OPEN FILES, CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK.
With a fingernail, pull the Compact Flash Card out of the slot using the lip on the bottom of the card.
77 - Compact Flash (CF) Cards
Device Ports
Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports to
which you can connect external devices including: disk drives, keyboards, printers, etc.
The following table indicates the ports on the system and/or the port replicator.
Port Type
Notebook
Quantity
Port Replicator
Quantity
USB 2.0
DC In
Headphone Jack
Microphone Jack
External Video Connector
1*
LAN connector (RJ-45)
1*
Port Replicator Connector
* When used in conjunction with Port Replicator connector and included external monitor/LAN adapter
cable.
Universal Serial Bus Ports
The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads,
pointing devices, keyboards and/or speakers. There is one USB 2.0 port on your notebook: four on the
optional port replicator.
In order to connect a USB device follow these steps:
Open the USB cover on the right side of the system.
78 - Device Ports
2
Align the connector with the port opening.
Push the connector into the port until it is seated..
NOTE THAT IN ORDER FOR THE USB PORTS ON THE PORT REPLICATOR TO WORK, THE PORT
REPLICATOR MUST BE POWERED USING AN AC ADAPTER.
USB connectors on optional port replicator
(three on rear and one on side)
USB connector
Figure 32. Connecting USB to System
Figure 33. Connecting USB to Port Replicator
DUE TO ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR
DRIVERS ARE GUARANTEED TO WORK.
79 - Device Ports
Headphone Jack
The headphone jack allows you to connect headphones or powered external speakers to your notebook.
Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect
headphones or speakers follow these easy steps:
Align the connector with the port opening.
Push the connector into the port until it is seated.
Microphone Jack
The microphone jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook.
In order to connect a microphone follow these easy steps:
Align the connector with the port opening.
Push the connector into the port until it is seated.
External Video Port
The external video port allows you to connect an external monitor or LCD projector. Note that in order to
use an external video device directly with the system, you must first attach the included external video/LAN
adapter cable. When connecting an external video device with the optional port replicator, it can be
connected directly to the dedicated port on the port replicator.
In order to connect an external video device, follow these easy steps:
Connecting external video to the system
If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 34). Align the cable connector with the port replicator connector
and push the connector into the port until it is seated.
Align the external video cable to the adapter cable. Tighten the two hold-down screws, located on each side of
the connector.
80 - Device Ports
PRESSING THE [FN] + [A] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND YOUR
EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE,
STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL MONITOR ONLY, FINALLY
MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL MONITOR.
DISPLAY VIDEO.
External Monitor/
LAN Adapter
External Video Cable
Port Replicator Connector
External Video Connector
Figure 34. Connecting External Video to System
Figure 35. Connecting to Port Replicator
Connecting external video to the optional port replicator
If connecting directly to the optional port replicator, align the external video cable to the connector on the port
replicator (Figure 35).
Tighten the two hold-down screws, located on each side of the connector.
81 - Device Ports
LAN (RJ-45) Jack
Note that in order to use the internal LAN device directly with the system, you must first attach the included
external video/LAN adapter cable. When connected with the optional port replicator, you can connect
directly to the dedicated LAN port on the port replicator
The LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may need to
configure your notebook to work with your particular network. (Please refer to your network administrator
for information on your network configuration.) To connect the LAN cable follow these easy steps:
External Monitor/
LAN Adapter
LAN Cable
Figure 36. Connecting the LAN and Adapter
Figure 37. Connecting the LAN/Port Replicator
Connecting directly to the internal LAN
If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 36). Align the cable connector with the port replicator connector
and push the connector into the port until it is seated.
82 - Device Ports
2
Align the LAN connector with the port opening.
Push the connector into the port until it is seated.
Plug the other end of the cable into a LAN outlet.
Connecting to the internal LAN via optional Port Replicator
Align the LAN connector with the port opening on the rear of the port replicator (Figure 37).
Push the connector into the port until it is seated.
Plug the other end of the cable into a LAN outlet.
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator or
for connection of the external video/LAN adapter cable. In order to connect your notebook to this device,
follow the instructions that came with your port replicator.
83 - Device Ports
Chapter 4
Troubleshooting Your LifeBook
Troubleshooting
There may be occasions when you encounter simple setup or operating problems that you can solve on the
spot, or problems with peripheral devices that can be solved by replacing the device. The information in
this section helps you isolate and resolve some of these straightforward issues and identify failures that
require service.
Identifying the Problem
If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
Turn off your LifeBook notebook.
Make sure that any devices connected to the external connectors are plugged in properly. You can also
disconnect such devices, thus eliminating them as possible causes of failure.
Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it back on.
Make sure the AC adapter is plugged into your notebook and to an active AC power source.
Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the
slot, thus eliminating it as a possible cause of failure.
Go through the boot sequence.
If the problem has not been resolved, refer to the Troubleshooting Table that follows for more detailed
troubleshooting information.
84
IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE
ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE.
If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support
representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487)
E-mail: 8fujitsu@us.fujitsu.com
Web site: http://www.computers.us.fujitsu.com/support.
Before you place the call, you should have the following information ready so that the customer support
representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Type of device connected, if any
See the Configuration Label on the bottom of your notebook for configuration and serial numbers.
85 - Troubleshooting
Specific Problems
Using the Troubleshooting Table
When you have problems with your LifeBook notebook, try to find the symptoms under the Problem
column of the troubleshooting table for the feature giving you difficulty. You will find a description of
common causes for that symptom under the column Possible Cause and what, if anything, you can do to
correct the condition under Possible Solutions. All possible causes or solutions may not apply to your
notebook.
Troubleshooting Table
Problem
Page
Problem
Page
Audio Problems . . . . . . . . . . . . . . page 86
Modem Problems
page 89
Optical Drive Problems . . . . . . . . page 87
USB Device Problems . . . . . . . . . page 89
Port Replicator Problems. . . . . . . page 88
Power Failures . . . . . . . . . . . . . . . page 89
Hard Drive Problems . . . . . . . . . . page 88
Shutdown and Startup Problems . page 92
Keyboard or Mouse Problems . . . page 88
Video Problems . . . . . . . . . . . . . . page 92
Memory Problems . . . . . . . . . . . . page 89
Miscellaneous Problems . . . . . . . . page 94
Problem
Possible Cause
Possible Solutions
The volume is turned too low.
Adjust the volume control on the left side of your notebook
Headphones are plugged into
your notebook.
Plugging in headphones disables the built-in speakers.
Remove the headphones.
Audio Problems
There is no sound coming
from the built-in speaker.
86 - Troubleshooting
Problem
Possible Cause
Possible Solutions
There is no sound coming
from the built-in speaker
(continued)
Software driver is not
configured correctly.
The audio driver may be installed or reinstalled using the
Drivers and Applications CD that came with your Fujitsu
LifeBook. Refer to your application and operating system
documentation for help.
The speakers have been
muted using the Volume icon
in the system tray.
Click on the Volume icon in the system tray on the bottom
right of the screen. (It looks like a speaker). If the Mute box is
checked (Windows XP) or the Mute icon has a red circle on it
(Windows Vista), click on it to deselect it.
Optical Drive Problems (optional external device)
LifeBook notebook fails to
recognize optical discs.
The disc is not pushed down
onto raised center circle of the
drive.
Open optical drive tray and re-install the disc properly.
Optical drive tray is not
latched shut.
Push on the front of the optical drive tray until it latches. If
that doesn’t work, pull out the modular drive latch to remove
the device from the bay, then re-insert the drive until it
latched; this ensures that the drive is properly seated.
Incorrect DVD Player or no
DVD Player software is
installed.
Install DVD Player software.
Wrong drive designator was
used for the disc in the application.
Verify the drive designator used by the application is the
same as the one used by the operating system. When the
operating system is booted from a DVD/CD, drive designations are automatically adjusted. Note that the drive designation can be changed with the Disk Management tool located
at Administrative Tools > Computer Management.
DVD/CD-RW/CD-ROM is dirty
or defective.
Wipe the disc with a non-abrasive CD cleaning cloth and
reinsert. It if still will not work try another DVD/CD-RW/CDROM in the drive.
87 - Troubleshooting
Problem
Possible Cause
Possible Solutions
Port Replicator Problems
Notebook does not turn on
when installed in the
optional Port Replicator
Port Replicator AC adapter is
not plugged in.
Provide power to the Port Replicator.
Notebook is not properly
seated in the Port Replicator.
Remove and re-dock your LifeBook notebook.
The wrong drive designator
was used by an application
when a bootable disc was
used to start the notebook.
Verify drive designator used by application is in use by the
operating system. When the operating system is booted from
a CD, drive designations are automatically adjusted.
Security is set so your operating system cannot be started
without a password.
Verify your password and security settings.
Hard Drive Problems
You cannot access your
hard drive.
Keyboard or Mouse Problems
The built-in keyboard does
not seem to work.
You have installed an
external keyboard or
mouse, and it does not
seem to work.
An external keyboard or a
mouse and it seems to be
locking up the system.
The notebook has gone into
Sleep mode.
Push the Power/Suspend/Resume button.
Your application has locked
out your keyboard.
Try to use your integrated pointing device to restart your
system.
Your external device is not
properly installed.
Re-install your device. See “Device Ports” on page 78.
Your operating system is not
set up with correct software
driver for that device.
Check your device and operating system documentation and
activate the proper driver.
Your operating system is not
set up with correct software
driver for that device.
Check your device and operating system documentation
and activate the proper driver.
Your system has crashed.
Try to restart your notebook. I
88 - Troubleshooting
Problem
Possible Cause
Possible Solutions
You have a memory failure.
Check for Power On Self Test (POST) messages. See
“Power On Self Test Messages” on page 95.
Memory Problems
Your System screen in the
Control Panel does not
show the correct amount
of installed memory.
Modem Problems (optional device)
Messages about modem
operation.
Messages about modem
operation are generated by
whichever modem application is in use.
See your application software documentation for additional
information.
The device is not properly
installed.
Remove and re-install the device. See “Device Ports” on
page 78.
The device may have been
installed while an application
was running, so the notebook
is not aware of its installation.
Close the application and restart your notebook.
Your device may not have the
correct software driver active.
See your software documentation and activate the correct
driver.
The installed battery is completely discharged or there is
no Power adapter (AC or
Auto/Airline) installed.
Check the Status Indicator Panel to determine the presence
and condition of the battery. See “Status Indicator Panel” on
page 29. Install a charged battery or a Power adapter.
The battery is installed but is
faulty.
Use the Status Indicator panel to verify the presence and
condition of the battery. See “Status Indicator Panel” on
page 29. If the battery indicates a short, remove it and
operate from another power source or replace that battery.
USB Device Problems
You have installed a USB
device. Your LifeBook
notebook does not recognize the device, or the
device does not seem to
work properly.
Power Failures
You turn on your LifeBook
notebook and nothing
seems to happen.
89 - Troubleshooting
Problem
Possible Cause
Possible Solutions
You turn on your LifeBook
notebook and nothing
seems to happen.
(continued)
The battery is low.
Check the Status Indicator Panel to determine the presence
and condition of the battery. See “Status Indicator Panel” on
page 29. Use a Power adapter to operate until a battery is
charged or install a charged battery.
The power adapter (AC or
auto/airline) is not plugged in
properly.
Verify that your adapter is connected correctly. See “Power
Sources” on page 53.
The power adapter (AC or
auto/airline) has no power
from the AC outlet, airplane
jack, or car cigarette lighter.
Move the AC cord to a different outlet, check for a line switch
or tripped circuit breaker for the AC outlet. If you are using an
auto/airline adapter in a car make sure the ignition switch is
in the On or Accessories position.
The power adapter (AC or
auto/airline) is faulty.
Try a different power adapter.
The power management
parameters are set for auto
timeouts which are too short
for your operating needs.
Press any button on the keyboard, or move the mouse to
restore operation. If that fails, push the Power/ Suspend/
Resume button. Check your power management settings, or
close your applications and go to the Power Options located
in the Control Panel to adjust the timeout values to better suit
your needs.
You are operating on battery
power and ignored a low battery alarm until the battery
was at the dead battery state
and the system has entered
Dead Battery Suspend mode.
Install a power adapter, then push the Power/Suspend/Resume button. See “Power Sources” on page 53.
You have a battery failure.
Verify the condition of the battery using the Status Indicator
panel. If the battery is shorted, replace or remove it. See
“Status Indicator Panel” on page 29.
Your power adapter has failed
or lost its power source.
Make sure the adapter is plugged in and the outlet has
power.
Your LifeBook notebook
turns off all by itself.
90 - Troubleshooting
Problem
Possible Cause
Possible Solutions
Your LifeBook notebook
will not work on battery
alone.
The installed battery is dead.
Replace the battery with a charged one or install a power
adapter.
No battery is installed.
Install a charged battery.
The battery is improperly
installed.
Verify that the battery is properly connected by re-installing it.
Your installed battery is faulty.
Verify the condition of the battery using the Status Indicator
panel and replace or remove any batteries that are shorted.
See “Status Indicator Panel” on page 29.
Battery has been exposed to
high temperatures.
Replace the battery.
You are running an application that uses a lot of power
due to frequent hard drive
access or optical drive
access, or use of a modem,
LAN PC card, Wireless LAN,
or Bluetooth device.
Use a power adapter for this application when at all possible.
The power savings features
may be disabled.
Check the Power Options menu settings and adjust according to your operating needs.
The brightness is turned all
the way up.
Turn down the brightness adjustment. The higher the
brightness the more power your display uses.
The battery is very old.
Replace the battery.
The battery has been
exposed to high temperatures.
Replace the battery.
The battery is too hot or too
cold.
Restore the notebook to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
The battery seems to
discharge too quickly.
91 - Troubleshooting
Problem
Possible Cause
Possible Solutions
Shutdown and Startup Problems
The Power/Suspend/
Resume button does not
work.
Power/Suspend/Resume
button is disabled.
In Windows XP, enable the button by going to the Control
Panel -> Power Options Properties and clicking on the
Advanced tab. In the Power buttons area, select the option
that best suits your needs. In Windows Vista, select the
Choose what the power button does option.
There may be application
software. conflict
Close all applications and try the button again.
The boot sequence settings
of the setup utility are not
compatible with your configuration.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See “BIOS Setup Utility” on page 57.
You have a secured system
requiring a password to load
your operating system.
Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as
accordingly. See “BIOS Setup Utility” on page 57.
An error message is displayed on the screen during the notebook (boot)
sequence.
Power On Self Test (POST)
has detected a problem.
See the Power On Self Test (POST) messages to determine
the meaning and severity of the problem. Not all messages
are errors; some are simply status indicators. See “Power On
Self Test Messages” on page 95.
Your notebook appears to
change setup parameters
when you start it.
BIOS setup changes were not
saved when made and you
exited the setup utility.
Make sure you select Save Changes And Exit when exiting
the BIOS setup utility.
The BIOS CMOS hold-up battery has failed.
Contact your support representative for repairs. This is not a
user serviceable part but has a normal life of 3 to 5 years.
Display angle and brightness
settings are not adequate for
your lighting conditions.
Move the display and the brightness control until you have
adequate visibility.
The system powers up,
and displays power on
information, but fails to
load the operating system.
Video Problems
The built-in display is blank
when you turn on your
LifeBook notebook.
92 - Troubleshooting
Problem
Possible Cause
Possible Solutions
The built-in display is blank
when you turn on your
LifeBook notebook.
(continued)
The notebook is set for an
external monitor only.
Pressing [A] while holding down the [Fn] key allows you to
change your selection of where to send your display video.
Each time you press the keys you will step to the next choice.
The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor.
Power management timeouts
are set for short intervals and
you didn’t see the display go
on and off again.
Press a keyboard button or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume button.
(The display may be shut off by Sleep mode, Auto Suspend
or Video Timeout)
The notebook turned on
with a series of beeps and
the built-in display is blank.
Power On Self Test (POST)
has detected a failure which
does not allow the display to
operate.
Contact your support representative.
The display goes blank by
itself after you have been
using it.
The notebook has gone into
Video timeout, Sleep mode,
or Save-to-Disk mode
because you have not used it
for a period of time.
Press any button on the keyboard, or move the mouse to
restore operation. If that fails, push the Power/Suspend/
Resume button. Check your power management settings, or
close your applications and go to the Power Savings menu of
the setup utility to adjust the timeout values to better suit your
operation needs. See “BIOS Setup Utility” on page 57.
The power management timeouts may be set for very short
intervals and you failed to
notice the display come on
and go off again.
Press any button on the keyboard, or move the mouse to
restore operation. If that fails, push the Power/Suspend/
Resume button. (The display may be shut off by Sleep Mode,
Auto Suspend or Video Timeout)
If the spots are very tiny and
few in number, this is normal
for a large LCD display.
This is normal; do nothing.
If the spots are numerous or
large enough to interfere with
your operation needs.
Display is faulty; contact your support representative.
The display has bright or
dark spots.
93 - Troubleshooting
Problem
Possible Cause
Possible Solutions
The Display is dark when
on battery power.
The Power Management utility default is set on low brightness to conserve power.
Press [Fn] + [" / '] to increase brightness or double-click on
the battery gauge and adjust Power Control under battery
settings.
You have connected an
external monitor and it
does not display any
information.
Your BIOS setup is not set to
enable your external monitor.
Toggle the video destination by pressing[Fn] + [_ / -] together,
or check your BIOS setup and enable your external monitor.
(See the Video Features submenu, located within the
Advanced Menu of the BIOS. See “BIOS Setup Utility” on
page 57.
Your external monitor is not
properly installed.
Reinstall your device. See “External Video Port” on page 80.
Your operating system is not
setup with the correct software driver for that device.
Check your device and operating system documentation and
activate the proper driver.
Your external monitor is not
compatible with your LifeBook
notebook.
See your monitor documentation and the External Monitor
Support portions of the Specifications section. See “Specifications” on page 115.
Application software often has
its own set of error message
displays.
See your application manual and help displays screens for
more information. Not all messages are errors some may
simply be status.
You have connected an
external monitor and it
does not come on.
Miscellaneous Problems
Error message is displayed on the screen during the operation of an
application.
94 - Troubleshooting
Power On Self Test Messages
The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating
system can generate and an explanation of each message. Error messages are marked with an *. If an error
message is displayed that is not in this list, write it down and check your operating system documentation
both on screen and in the manual. If you can find no reference to the message and its meaning is not clear,
contact your support representative for assistance.
nnnn Memory Cache Passed
Where nnnn is the amount of system cache in kilobytes successfully tested by the Power On Self
Test. (This can only appear if you have an SRAM PC Card installed.)
Floppy Disk drive A error or Floppy Disk drive B error
Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive
is defined with the proper diskette type in the Setup Utility, See “BIOS Setup Utility” on page 57. and that
the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid using it
and contact your support representative.
*Extended Memory Failed at address line: xx
Extended memory not working or not configured properly. If you have an installed memory upgrade
module, verify that the module is properly installed. If it is properly installed, you may want to check your
Windows Setup to be sure it is not using unavailable memory until you can contact your support
representative.
nnnn Extended RAM Passed
Where nnnn is the amount of memory in kilobytes successfully tested.
95 - Troubleshooting
*Failure Fixed Disk n (where x=1-4)
The fixed disk is not working or not configured properly. This may mean that the hard drive type identified
in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility
to check for the hard drive type settings and correct them if necessary. If the settings are OK and the
message appears when you restart the system, there may be a serious fault which might cause you to lose
data if you continue. Contact your support representative.
*Incorrect Drive A type – run SETUP
Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type
identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the
setup utility to correct the inconsistency.
*Incorrect Drive B type – run SETUP
Type of floppy drive B: not correctly identified in Setup. This means that the floppy disk drive type
identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the
setup utility to correct the inconsistency.
*Invalid NVRAM Data
Problem with NVRAM access. In the unlikely case that you see this message you may have some display
problems. You can continue operating but should contact your support representative for more
information.
*Keyboard controller error
The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but
may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error
Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to
use an external keyboard until then. Contact your support representative.
96 - Troubleshooting
*Stuck Key
BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your
keyboard but may be able to use an external keyboard until then. Contact your support representative.
*Monitor type does not match CMOS – Run SETUP
Monitor type not correctly identified in Setup. This error probably means your BIOS is corrupted, run the
setup utility and set all settings to the default conditions. If you still get this error, contact your support
representative.
*Operating system not found
Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both
the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you
have changed your installation greatly, the operating system should be on drive C:. If the setup utility is
correctly set, your hard drive may be corrupted.
*Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If
it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact your
support representative.
*Parity Check 2 nnnn
Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it
cannot locate the address, it displays ????. This is a potentially data-destroying failure. Contact
your support representative.
*Press  to resume,  to SETUP
Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2]
key to enter Setup and change any settings.
97 - Troubleshooting
*Previous boot incomplete – Default configuration used
Previous Power On Self Test did not complete successfully. The Power On Self Test will load default
values and offer to run Setup. If the previous failure was caused by incorrect values and they are not
corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a
successful boot sequence, you should turn off the power and contact your support representative.
*Real time clock error
Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Shadow RAM Failed at offset: nnnn
Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data
corruption if you continue. Contact your support representative.
nnnn Shadow RAM Passed
Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
*System battery is dead – Replace and run SETUP
The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted
battery which requires a support representative to change. You can continue operating but you will have
to use setup utility default values or reconfigure your setup utility every time you turn off your notebook.
System BIOS shadowed
System BIOS copied to shadow RAM.
*System CMOS checksum bad – Default Configuration Used
BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that
changes data stored in BIOS memory. Run Setup and reconfigure the system.
98 - Troubleshooting
*System RAM Failed at offset: nnnn
System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that
there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact
your support representative for repairs.
nnnn System Memory Passed
Where nnnn is the amount of system memory in kilobytes successfully tested.
*System timer error
The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board.
Contact your support representative for repairs.
Video BIOS shadowed
Video BIOS successfully copied to shadow RAM.
99 - Troubleshooting
Restoring Your Pre-installed Software
The Drivers and Applications Restore (DAR) DVD contains sets of device drivers and Fujitsu utilities (in
specific directories) that are unique to your computer configuration for use as documented below.
IN ORDER TO INSTALL APPLICATIONS AND/OR DRIVERS FROM THE DAR CD, YOU WILL NEED TO USE A
DVD DRIVE ATTACHED EXTERNALLY.
IF YOU HAVE ACCESS TO THE INTERNET, VISIT THE FUJITSU SUPPORT WEBSITE AT
HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO CHECK FOR THE MOST CURRENT
INFORMATION, DRIVERS AND HINTS ON HOW TO PERFORM RECOVERY AND SYSTEM UPDATES.
Re-installing Individual Drivers and Applications
The Drivers and Applications CD can be used to selectively re-install drivers and/or applications that may
have been uninstalled or corrupted.
THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT
ARE NOT ON THE DAR CD. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED FROM
THE THIRD-PARTY’S WEBSITE.
To re-install drivers and/or applications:
Connect an external DVD drive to your LifeBook
After reading the License Agreement, click [I agree].
Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed
after the CD is inserted.
100 - Restoring Your Pre-installed Software
3
A window will appear containing a list of applications, drivers, and utilities that you can install from the Drivers
and Applications CD.
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES
THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE
INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS
CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE
COMPONENT IS ALREADY INSTALLED.
In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green
components separately.
Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
Restoring the Operating System for Windows Vista Systems
The Recovery and Utility disc contains four utilities:
• The Recovery utility allows you to restore the system operating system (OS). The restored OS is
the same one that was originally installed on the hard disk drive. After the OS is restored, you will
need to reinstall the drivers and applications from the Drivers and Applications Restore disc and
from any application discs that were bundled with the system when you purchased it.
• The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk
and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are
absolutely certain that you want to erase your entire hard disk, including all partitions.
• The Partition Creation utility allows you to create a new D: partition or resize existing
partitions on your hard disk. NOTE: Creating or resizing partitions with this utility will cause
all data on the hard disk to be completely erased.
• The Diagnostics utility allows the IT professional to determine device status/condition by
executing diagnostics tests on selected system components.
101 - Restoring Your Pre-installed Software
Methods for accessing the utilities
In order to determine the method for accessing the Recovery and Utility applet, perform the
following procedures in order.
Determining whether Recovery and Utility is pre-loaded
Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key.
You can also use the TrustedCore menu to determine whether the utility is pre-loaded by powering on your
system then pressing the {Enter] key when the Fujitsu logo appears on the screen. The TrustedCore Menu will
appear and the Recovery and Utility option will appear in the menu.
From the Boot Menu that appears, check whether the  option is present. If it is not
present, it means that the utility must be used from the disc. Proceed to “Running Recovery and Utility from the
disc” if  is unavailable.
Running Recovery and Utility from hard disk
Cursor down to  and press the [Enter] key.
While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next].
When the Operating System dialog appears, click [Next].
If necessary, enter your password, then click [OK].
When System Recovery Options window appears, click on Recovery and Utility.
The Recovery and Utility screen appears on the screen with three tabs: Diagnostics, Recovery and Utility.
Please note that Diagnostics tab is not supported on certain LifeBook/Stylistic models when running Recovery
and Utility from the hard disk. In order to restore the operating system, please insert the “Recovery and Utility”
disc in the CD/DVD drive and use the Start Recovery function under the Recovery tab. For more information
about the tabs, go to “Recovery and Utility tabs” on page 103.
Running Recovery and Utility from the disc
To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy
disk drive), perform the following steps:
102 - Restoring Your Pre-installed Software
1
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
Select the Boot Menu from the TrustedCore Menu.
Highlight the CD/DVD option.
Insert the Recovery and Utility Disc into the drive tray.
Click [OK]. While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
When the Recovery and Utility screen appears, three tabs will be present: Diagnostics, Recovery, and Utility.
Recovery and Utility tabs
Diagnostics tab: The Diagnostics tool is designed for use by IT professionals. It is not likely you will
need to use this tool. When you select devices from the Diagnosis window then click [Execute], several
tests are performed on the selected components.
Recovery tab: The Recovery tab contains the Start Recovery tool. Note that the recovery process erases
all data from the C: drive. If you decide to use the recovery tool, be sure to back up all data that you don’t
want to lose. Also note that you must run the system using your AC adapter while running the recovery
tool. To use the Recovery tool, select the Start Recovery function, click on the [Execute] button, then
follow the instructions on the screen.
Utility tab: The Utility tab contains three tools: System Restore, Hard Disk Data Delete and Partition
Creation.
• System Restore can help fix problems that might be making your computer run slowly or stop
responding. System Restore enables you in rolling back the system to an earlier restore point, and
does not affect any of your documents, pictures, or other personal data.
• The Hard Disk Data Delete utility is used to delete all data on the hard disk and prevent the data
from being reused. NOTE: Do not use the Hard Disk Data Delete utility unless you are
absolutely certain that you want to erase your entire hard disk, including all partitions.
• The Partition Creation utility allows you to create a D: partition or resize existing partitions on
your hard disk. NOTE: Creating or resizing partitions with this utility will cause all data on the hard
disk to be completely erased.
103 - Restoring Your Pre-installed Software
Restoring the Operating System for Windows XP Systems
The Recovery and Utility disc contains three utilities:
• The Recovery utility allows you to restore the system operating system (OS). The restored OS is
the same one that was originally installed on the hard disk drive. After the OS is restored, you will
need to reinstall the drivers and applications from the Drivers and Applications Restore disc and
from any application discs that were bundled with the system when you purchased it.
• The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and
prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely
certain that you want to erase your entire hard disk, including all partitions.
• The Partition Creation utility allows you to create or resize partitions on your hard disk. NOTE:
Creating or resizing partitions with this utility will cause all data on the hard disk to be
completely erased.
Running Recovery and Utility from the disc
To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy
disk drive), perform the following steps:
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
Select the Boot Menu from the TrustedCore Menu.
Highlight the CD/DVD option.
Insert the Recovery and Utility Disc into the drive tray.
Click [OK]. While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
When the Recovery and Utility screen appears, three tabs will be present: Diagnostics, Recovery, and Utility.
See “Recovery and Utility tabs” on page 103.
104 - Restoring Your Pre-installed Software
Automatically Downloading Driver Updates
Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can
choose to automatically or manually go to the Fujitsu site to check for new updates for your system.
The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the
icons to find the correct one). If the icon does not appear in the system tray, go to [Start] -> All Programs,
and click on Fujitsu Driver Update; this will create the icon automatically.
To invoke the FDU menu, you can either right-click on the FDU icon or hold the pen on the icon for a
couple of seconds until the menu appears. The menu contains the following items:
Check for updates now
Allows for manual driver update search. The first time it is used, you are prompted to agree to a user
agreement. After clicking on icon, FDU automatically connects with the Fujitsu site to check for updates
and downloads them. While downloading, the icon has a red bar through it, indicating that it cannot be
used while the download is in process. When update is complete, a message appears to inform you.
Enable Automatic Update Notifications
Automatically searches for new updates on a regular basis (approximately every 3 days).
Show update history
Brings up a screen that displays a history of updates that have been made via the FDU.
About Fujitsu Driver Update
Displays the FDU version number and copyright information
Fujitsu Driver Update Readme
Displays the FDU readme.
105 - Restoring Your Pre-installed Software
Chapter 5
Care and Maintenance
106
Caring for your LifeBook Notebook
If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section
provides some tips for looking after the notebook and its devices.
• THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC
DISCHARGE
(ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING
PRECAUTIONS:
- BEFORE DOCKING OR UNDOCKING YOUR LIFEBOOK NOTEBOOK (WHEN USING A PORT
REPLICATOR), IT IS A GOOD PRACTICE TO ALWAYS TOUCH A GROUNDED METAL OBJECT TO
DISCHARGE STATIC ELECTRICITY BUILT UP IN YOUR BODY.
- BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING SYSTEM COMPONENTS.
EVEN IF THE SYSTEM IS IN HIBERNATE OR SLEEP STATES, DATA COULD BE LOST OR MEMORY
COULD BE DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM.
- WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO
TOUCH ANY CONTACTS OR CHIPS. BE CAREFUL NOT TO TOUCH ANY INTERNAL COMPUTER
TERMINALS OR COMPONENTS; THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE
COMPONENTS.
• ELECTRICAL EQUIPMENT MAY BE HAZARDOUS IF MISUSED. OPERATIONS OF THIS PRODUCT OR SIMILAR
PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT.
DO NOT ALLOW CHILDREN ACCESS TO THE
INTERIOR OF ANY ELECTRICAL PRODUCTS AND DO NOT PERMIT THEM TO HANDLE ANY CABLES.
• Your LifeBook notebook is a durable but sensitive electronic device. Treat it with respect and care.
• Make a habit of transporting it in a suitable carrying case.
• Do not attempt to service the computer yourself. Always follow installation instructions closely.
• Keep it away from food and beverages.
• To protect your notebook from damage and to optimize system performance, be sure to keep all air
all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending
upon the environment in which the system is used.
107 - Caring for your LifeBook Notebook
• Do not operate the notebook in areas where the air vents can be obstructed, such as in tight
enclosures or on soft surfaces like a bed or cushion.
• If you accidentally spill liquid on your
LifeBook notebook:
Turn it off immediately.
Position it so that the liquid can run out.
Let it dry out for 24 hours, or longer if needed.
If your notebook will not boot after it has dried out, call your support representative.
• Do not use your LifeBook notebook in a wet environment (near a bathtub, swimming pool).
• Always use the AC adapter and batteries that are approved for your notebook.
• Avoid exposure to sand, dust and other environmental hazards.
• Do not expose your notebook to direct sunlight for long periods of time as temperatures above 140°
F (60° C) may damage your notebook.
• Keep the covers closed on the connectors and slots when they are not in use.
• Do not put heavy or sharp objects on the computer.
• If you are carrying your notebook in a briefcase, or any other carrying case, make sure that there
are no objects in the case pressing on the lid.
Cleaning your LifeBook notebook
• Always disconnect the power plug. (Pull the plug, not the cord.)
• Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents.
• Use a soft cloth to remove dust from the screen. Never use glass cleaners.
• Always shut down the computer, unplug the power adapter, and remove the battery when cleaning
or disinfecting the computer exterior, keyboard or LCD display.
108 - Caring for your LifeBook Notebook
Cleaning guidelines using recommended off-the-shelf cleaners
Computer exterior, computer keyboard
To clean the exterior and keyboard, use one of the following off-the-shelf products:
• Office Depot® #154-616 Notebook Cleaning Kit
• Meridrew Enterprises Klear_Screen® Wipes
• 3M CL563 Cleaner Wipes
Note: After cleaning with one of these products, gently polish with a dry, soft, lint-free cloth until the
solution is no longer visible.
LCD display
To clean the LCD display or fingerprint sensor, use one of the following off-the-shelf products:
• Office Depot® #154-616 Notebook Cleaning Kit
• Meridrew Enterprises Klear_Screen® Wipes
Wipe the LCD surface gently, allowing it to dry before turning on the computer.
Disinfecting LifeBook computers
Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide
which has been registered as a hospital disinfectant by the EPA.
•
USE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE LCD AND/OR DAMAGE TO THE
COMPUTER. ALWAYS REFER TO THE CLEANER MANUFACTURER'S GUIDELINES AND MATERIAL SAFETY DATA SHEETS
FOR PROPER HANDLING AND USE OF THE PRODUCTS.
•
NEVER USE AMMONIA, ACIDIC, OR ALKALINE CLEANERS OR ORGANIC CHEMICALS SUCH AS PAINT THINNER,
ACETONE, PROPYL OR ISOPROPYL ALCOHOL, OR KEROSENE. IT MAY DAMAGE SURFACE FINISHES AND THE COATING
OF THE LCD SCREEN.
•
NEVER USE COMPRESSED AIR FOR CLEANING STYLISTIC AND LIFEBOOK PCS.
109 - Caring for your LifeBook Notebook
Storing your LifeBook notebook
• If storing your notebook for a month or longer, turn your LifeBook notebook off, fully charge the
battery(s), then remove and store all Lithium ion batteries.
• Store your notebook and batteries separately. If you store your LifeBook with a battery installed,
the battery will discharge, and battery life will be reduced. In addition, a faulty battery might
damage your LifeBook.
• Store your Fujitsu LifeBook in a cool, dry location. Temperatures should remain between 13ºF
(-25ºC) and 140ºF (60ºC).
Traveling with your LifeBook notebook
• Do not transport your notebook while it is turned on.
• Never put your notebook through a metal detector. Have your notebook hand-inspected by security
personnel. You can however, put your notebook through a properly tuned X-ray machine. To avoid
problems, place your notebook close to the entrance of the machine and remove it as soon as
possible or have your notebook hand-inspected by security personnel. Security officials may
require you to turn your notebook on, so make sure you have a charged battery on hand.
• Always bring your System Recovery CD that came with your notebook when you travel. If you
experience system software problems while traveling, you may need it to correct any problems.
110 - Caring for your LifeBook Notebook
• Take the necessary plug adapters if you're traveling overseas. Check the following diagram to
determine which plug adapter you'll need or ask your travel agent.
Outlet Type
Location
United States, Canada, parts of Latin America, Mexico,
Japan, Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent States (CIS),
most of Europe, parts of Latin America, the Middle East,
parts of Africa, Hong Kong, India, most of South Asia
United Kingdom, Ireland, Malaysia, Singapore, parts of Africa
China, Australia, New Zealand
• It is recommended that you carry your notebook with you while traveling, rather than checking it
in as baggage.
111 - Caring for your LifeBook Notebook
Batteries
Caring for your Batteries
• Always handle batteries carefully.
• Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object).
Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal
objects. Doing so may cause an explosion or fire.
• Do not drop, puncture, disassemble, mutilate or incinerate the battery.
• Recharge batteries only as described in this manual and only in ventilated areas.
• Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten the life
of your battery.
• Do not leave a battery in storage for longer than 6 months without recharging it.
Increasing Battery Life
• Power your LifeBook notebook through the AC or optional auto/airline adapter whenever possible.
• If your notebook is running on battery power all day, connect it to the AC adapter overnight to
recharge the battery.
• Keep brightness to the lowest level comfortable.
• Set the power management for maximum battery life.
• Put your notebook in Sleep mode when it is turned on and you are not actually using it.
• Disable the Media Player auto insert notification function.
• Always use fully charged batteries.
112 - Caring for your LifeBook Notebook
Media Care
Caring for your Media (DVD/CD/CD-R)
If you have an optional external optical drive connected to your system, be sure to handle the media discs
carefully. Media discs are precision devices and will function reliably if given reasonable care.
• Always store your media disc in its case when it is not in use.
• Always handle discs by the edges and avoid touching the surface.
• Avoid storing any media discs in extreme temperatures.
• Do not bend media discs or set heavy objects on them.
• Do not spill liquids on media discs.
• Do not scratch media discs.
• Do not get dust on media discs.
• Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen.
• If a media disc is subjected to a sudden change in temperature, cold to warm condensation may form
on the surface. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room
temperature. DO NOT use a hair dryer or heater to dry media discs.
• If a disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting
from the inner edge and wiping to the outer edge.
Caring for your Optional External Optical Drive
Your optional external optical drive is durable but you must treat it with care. Please pay attention to the
following points:
• The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock
or vibration with the power on.
• Avoid using or storing the drive where it will be exposed to extreme temperatures.
113 - Caring for your LifeBook Notebook
• Avoid using or storing the drive where it is damp or dusty.
• Avoid using or storing the drive near magnets or devices that generate strong magnetic fields.
• Avoid using or storing the drive where it will be subjected to shock or vibration.
• Do not disassemble or dismantle the optical drive.
• Use of a commercially available lens cleaner is recommended for regular maintenance of your
drive.
114 - Caring for your LifeBook Notebook
Chapter 6
System Specifications
Specifications
This section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook.
Specifications of particular configurations will vary.
Configuration Label
The configuration label located on the bottom of your notebook contains specific information regarding the
options you’ve chosen for your notebook. Following is an example configuration label.
Part Number
Configuration ID
Configuration P/N: A3QXXXXXXXXXXXX
FPC P/N: FPCXXXXXX
U820, Z530, 5.6 WSVGA, VBE, 60G, 1GB
Processor
Model #
Operating System
Screen Size/Type
115
Memory
Hard Drive
Microprocessor
Intel® Atom™ Z530 processor (Refer to the system label to determine the speed of your processor).
Chipset
• Intel 945GU Express
• Intel ICH7-U Controller Hub
Memory
System Memory
• DDR2-533 MHz SDRAM dual-channel memory module.
• Total of 1 GB pre-installed. No DIMM slots for expansion.
Cache Memory
512 KB L2 cache on-die
Video
Built-in color flat-panel TFT active matrix LCD display with simultaneous display capability.
Video Color and Resolution
5.6" Crystal View Wide SVGA display
• Internal: 1280 x 800 pixel resolution, 16M colors
• External: 1280 x 1024 pixel resolution, 16M colors
• Simultaneous:
Windows Vista mode: 1024 x 600 pixel resolution
Windows XP Tablet PC model: 1280 x 1024 pixel resolution
116 - Specifications
Video RAM
Intel® 945GU Express with Intel® ICH7U I/O Controller Hub. Up to 224 MB shared video memory
Audio
• Audio Realtek Codec ALC269 with High Definition (HD) audio.
• Headphones: Stereo headphone jack, 3.5 mm, 400mVrms or less, minimum impedance 32 Ohms
• Microphone: Stereo microphone jack, 3.5 mm, 100 mVp-p or less, minimum impedance 1.2K
Ohms
• One built-in speaker, 16 mm diameter, mono
• One built-in digital microphone
Mass Storage Device Options
Hard Drive
• Parallel ATA, Ultra DMA 100, 4200 rpm, 1.8”, 5 mm
• Shock-mounted
Features
Integrated Pointing Device
Cursor control button
Communications
• Internal LAN: Internal wired 10/100 Ethernet LAN
• WLAN: Integrated Atheros® AR9280AL1E (AR5BHB92) Half Mini-Card Wireless network
card (802.11a/b/g/n)
• Bluetooth: Optional Bluetooth device for wireless personal area network communication
117 - Specifications
Trusted Platform Module
The LifeBook U820 has a Trusted Platform Module (TPM) installed for added system security.
Programmable LifeBook Application/Tablet PC Buttons .
Button
Button Function
Default Application
Default Application with Fn Button
Application A
Keyboard “headlights” on/off
Power Saving Mode
//
Application B
On-screen Keyboard/Writing Pad
Windows Journal
Fn
Function
Used in conjunction with Application
Buttons to change functions.
Press Fn twice for Fujitsu Menu
Ó
Scroll Down
Scroll Down
Page Down
Ò
Scroll Up
Scroll Up
Page Up
Figure 38. Application Launcher Defaults
Device Ports
On the LifeBook notebook:
• Secure Digital (SD) Card slot
• One Compact Flash (CF) slot
• One USB 2.0 (Universal Serial Bus) connector for input/output devices
• One DC In connector
• Port Replicator connector (also accommodates external video/LAN cable adapter)
• One stereo headphone jack
• One stereo microphone jack
118 - Specifications
On the Optional Port Replicator:
• One 15-pin D-SUB connector for VGA external monitor
• Four USB 2.0 connectors for input/output devices
• One LAN (RJ-45) connector
• One DC-in connector
Keyboard
Built-in keyboard
• Total number of keys: 68
• Function keys: [F1] through [F12] when used in conjunction with [Fn] key
• Two Windows keys: one Start key, one application key
• Key pitch: 15 mm; key stroke: 13.0 mm
• Built-in cursor control button with left and right buttons and scroll buttons.
• External USB keyboard/mouse support
Power
Batteries
• Standard Lithium ion battery, rechargeable, 2-cell 7.2V, 2900 mAh, or,
• High-capacity Lithium ion battery, rechargeable, 4-cell 7.2V, 5800 mAh
AC Adapter
Autosensing 100-240V AC, supplying 16V DC, 2.5A, 40W to the LifeBook; includes an AC cable
Power Management
Conforms to ACPI (Advanced Configuration and Power Interface).
119 - Specifications
Dimensions and Weight
Overall Dimensions
With 2-cell battery: Approximately 6.73"(w) x 5.31"(d) x 1.16”/1.46”(h) (171.0 mm x 135.0 mm x
29.5/37.0 mm)
With 4-cell battery: Approximately 6.73"(w) x 6.14"(d) x 1.16”/1.46”(h) (171.0 mm x 156.0 mm x
29.5/37.0 mm)
Weight
Approximately 1.56 lbs. (707 g) with battery
Environmental Requirements
Temperature
Operating: 41° to 95° F (5° to 35° C). Non-operating: 5° to 140° F (–15° to 60° C)
Humidity
Operating: 20% to 85%, relative, non-condensing. Non-operating: 8% to 85%, relative, non-condensing
Altitude
Operating: 10,000 feet (3,048 m) maximum
Popular Accessories
For ordering or additional information on Fujitsu accessories please visit our Web site at
www.shopfujitsu.com or call 1-800-FUJITSU.
120 - Specifications
Pre-Installed Software
Depending on your operating system, your notebook comes with pre-installed software for playing audio
and video files of various formats. In addition there is file transfer software, virus protection software and
Power Management software. The following list indicates the pre-installed software on your system.
• Adobe Acrobat Reader
• ArcSoft WebCam Companion 2
• Microsoft Origami for Vista (Windows Vista models only)
• TBD - AT&T Connection Manager
• TBD - AT&T Modem Auto Activation Agent
• OmniPass Fingerprint application (located in “3rd Party Software” folder on Desktop)
• Fujitsu Driver Update utility
• Microsoft Office Ready with Office Activation Assistant
• Microsoft Reader
• Microsoft Works with Office 2007 Student and Home Trial Edition (Windows Vista Home
Premium only)
• Microsoft Office OneNote 2007
• Operating System: Microsoft Windows Vista Home Premium, Windows Vista Business, or
Windows XP Tablet PC Edition
Learning About Your Software
Tutorials
All operating systems and most application software have tutorials built into them upon installation. We
highly recommend that you step through the tutorial before you use an application.
121 - Specifications
Manuals
Included with your notebook you will find manuals for your installed operating system and other preinstalled software. If any manuals are not included, information about the application is available online
or through the help system of the software. We recommend that you review these manuals for general
information on the use of these applications.
Adobe Acrobat Reader
The Adobe Acrobat Reader allows you to view, navigate, and print PDF files from across all of the major
computing platforms.
ArcSoft WebCam Companion 2
WebCam Companion 2 offers a variety of webcam-optimized functions such as automatically recording
movement detected by the cam, launching video chat sessions, capturing still and video images, and
editing photos.
OmniPass Fingerprint application
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows,
applications, and on-line passwords, and presents a convenient user interface through which you can
securely manage passwords, users, and multiple identities for each user. Note that the OmniPass
application is not pre-installed, but is located in the “3rd Party Software” folder on your desktop.
Fujitsu Driver Update Utility
The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose to
automatically or manually go to the Fujitsu site to check for new updates for your system. See
“Automatically Downloading Driver Updates” on page 105.
Operating System Options
Depending upon your system, one of the following operating system configurations will be installed:
122 - Specifications
•
Microsoft Windows XP Tablet PC Edition
•
Windows Vista Business Edition
•
Microsoft Windows Vista Home Premium Edition
With Microsoft Works and Office 2007 Student and Home Trial Edition
Microsoft Works with Office 2007 Student and Home Trial Edition (Windows Vista Home Premium
only)
Microsoft Works 9.0 is a software suite containing the basic tools to write letters and reports, track family
and friends with address books, manage home finances, and create a home inventory.
Microsoft Origami for Vista (Windows Vista only)
Origami contains three applications: Origami Experience helps you easily access your programs and
music/photo/video files. Sudoku is a touch screen version of the popular game. Touch Settings lets you
customize how you interact with the touch screen.
Microsoft Tablet PC Experience Pack (Windows XP Tablet PC only)
Tablet PC Experience Pack contains a number of different tools and games. The Experience Pack lets you
take notes directly to your desktop, paint on-screen, snip and capture sections from the screen, organize
your media files, and play word games.
123 - Specifications
Glossary
AC Adapter
A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your
LifeBook notebook.
Access point
Wireless network device used to bridge wireless and wired network traffic.
ACPI
Advanced Configuration and Power Interface
Active-Matrix Display
A type of technology for making flat-panel displays which has a transistor or similar device for every
pixel on the screen.
Ad Hoc Mode
Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between
multiple computers is established without a central wireless network device, typically known as Access
Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion.
124
Auto/Airline Adapter
A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power
outlet to the DC voltage needed to power your LifeBook notebook.
BIOS
Basic Input-Output System. A program and set of default parameters stored in ROM which tests and
operates your LifeBook notebook when you turn it on until it loads your installed operating system
from disk. Information from the BIOS is transferred to the installed operating system to provide it with
information on the configuration and status of the hardware.
Bit
An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0).
bps
An abbreviation for bits per second. Used to describe data transfer rates.
Boot
To start-up a computer and load its operating system from disk, ROM or other storage media into
RAM.
Bus
An electrical circuit which passes data between the CPU and the sub-assemblies inside your LifeBook
notebook.
Byte
8 bits of parallel binary information.
Cache Memory
A block of memory built into the micro-processor which is much faster to access than your system
RAM and used in specially structured ways to make your overall data handling time faster.
125 - Glossary
CardBus
A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI
architecture.
CD-ROM
Compact disk read only memory. This is a form of digital data storage which is read optically with a
laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not
subject to heads crashing into the surface and destroying the data when there is a failure nor to wear
from reading.
Channel
Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11
channels, 22 MHz wide channels.
Command
An instruction which you give your operating system. Example: run a particular application or format
a floppy disk.
Configuration
The combination of hardware and software that makes up your system and how it is allocated for use.
CRT
Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent
screen. It produces a visual image by varying the position and intensity of the beam.
Data
The information a system stores and processes.
DC
Direct current. A voltage or current that does not fluctuate periodically with time.
126 - Glossary
Default Value
A pre-programmed value to be used if you fail to set your own.
DHCP
Dynamic Host Configuration Protocol. A protocol used to automatically acquire parameters required
for the communication, such as IP address. The sender of IP address is called a DHCP server, and the
receiver is called a DHCP client.
DIMM
Dual-in-line memory module.
Disk
A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is
highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly
called a diskette.
Disk Drive
The hardware which spins the disk and has the heads and control circuitry for reading and writing the
data on the disk.
DMA
Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require
CPU action.
DMI
Desktop Management Interface. A standard that provides PC management applications with a
common method of locally or remotely querying and configuring PC computer systems, hardware and
software components, and peripherals.
127 - Glossary
DNS
Domain Name System. A function to control the association between the IP address and the name
assigned to the computer. If you do not know the IP address but if you know the computer name, you
can still communicate to that computer.
DOS
Disk Operating System (MS-DOS is a Microsoft Disk Operating System).
Driver
A computer program which converts application and operating system commands to external devices
into the exact form required by a specific brand and model of device in order to produce the desired
results from that particular equipment.
DVMT
Dynamic Video Memory Technology. A video memory architecture that increases the efficiency of the
motherboard by using innovative memory utilization and direct AGP.
ECP
Extended Capability Port. A set of standards for high speed data communication and interconnection
between electronic devices.
Encryption Key (Network Key)
Data encryption key used to encrypt message text and for computing message integrity checks. Data
encryption protects data from unauthorized viewing.
This device uses the same encryption key to encode and decode the data, and the identical encryption
key is required between the sender and receiver.
128 - Glossary
ESD
Electrostatic Discharge. The sudden discharge of electricity from a static charge which has built-up
slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing
hair on a dry day.
FCC
Federal Communication Commission.
GB
Gigabyte. One billion bytes.
Hard drive
A spinning platter of magnetic data storage media where the platter is very stiff.
I/O
Input/Output. Data entering and leaving your notebook in electronic form.
I/O Port
The connector and associated control circuits for data entering and leaving your notebook in electronic
form.
IDE
Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive
unit.
IEEE802.11a
Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the
5 GHz lower and middle UNII bands.
129 - Glossary
IEEE802.11b
Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the
2.4 GHz ISM band.
IEEE802.11g
Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the
2.4 GHz ISM band.
Infrared
Light just beyond the red portion of the visible light spectrum which is invisible to humans.
Infrastructure
A name of a wireless LAN configuration. This type of communication uses an access point. Another
type of communication is called Ad Hoc.
IP Address
An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol
route messages based on the IP address of the destination. The format of an IP address is a 32-bit
numeric address written as four numbers separated by periods. Each number can be zero to 255. For
example, 1.160.10.240 could be an IP address.
Within an isolated network, you can assign IP addresses at random as long as each one is unique.
However, connecting a private network to the Internet requires using registered IP addresses (called
Internet addresses) to avoid duplicates.
The four numbers in an IP address are used in different ways to identify a particular network and a
host on that network. Three regional Internet registries -- ARIN, RIPE NCC and APNIC -- assign
Internet addresses from the following three classes.
Class A - supports 16 million hosts on each of 126 networks
130 - Glossary
Class B - supports 65,000 hosts on each of 16,000 networks
Class C - supports 254 hosts on each of 2 million networks
The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR
is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6.
IR
An abbreviation for infrared.
IrDA
Infrared Data Association. An organization which produces standards for communication using
infrared as the carrier.
IRQ
Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred
which needs to be processed.
KB
Kilobyte. One thousand bytes.
LAN
Local Area Network. An interconnection of computers and peripherals within a single limited
geographic location which can pass programs and data amongst themselves.
LCD
Liquid Crystal Display. A type of display which makes images by controlling the orientation of
crystals in a crystalline liquid.
Lithium ion Battery
A type of rechargeable battery which has a high power-time life for its size and is not subject to the
memory effect as Nickel Cadmium batteries.
131 - Glossary
MAC Address
Media Access Control Address. A unique physical address of a network card. For Ethernet, the first
three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes
are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique
physical address in the world, being assigned with a different address from other cards. For Ethernet,
frames are sent and received based on this address.
MB
Megabyte. One million bytes.
Megahertz
1,000,000 cycles per second.
Memory
A repository for data and applications which is readily accessible to your LifeBook notebook’s CPU.
MHz
Megahertz.
MIDI
Musical Instrument Digital Interface. A standard communication protocol for exchange of
information between computers and sound producers such as synthesizers.
Modem
A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data
terminal to a communication line.
Monaural
A system using one channel to process sound from all sources.
132 - Glossary
MTU
Maximum Transmission Unit
The maximum data size that can be transferred at a time through the Internet or other networks. You
can set a smaller MTU size to obtain successful communication, if you have difficulty transferring
data due to the fact that the maximum size is too large.
Network key
Data that is used for encrypting data in data communication. The personal computer uses the same
network key both for data encryption and decryption, therefore, it is necessary to set the same network
key as the other side of communication.
Network name (SSID: Service Set Identifier)
When a wireless LAN network is configured, grouping is performed to avoid interference or data theft.
This grouping is performed with “Network name (SSID)”. In order to improve security, the network
key is set allowing no communication unless “Network name (SSID)” coincides with the network key.
NTSC
National TV Standards Commission. The standard for TV broadcast and reception for the USA.
Open system authentication
Null authentication method specified in the 802.11 standard that performs no authentication checks on
a wireless client before allowing it to associate.
Operating System
A group of control programs that convert application commands, including driver programs, into the
exact form required by a specific brand and model of microprocessor in order to produce the desired
results from that particular equipment.
133 - Glossary
Partition
A block of space on a hard drive which is set aside and made to appear to the operating system as if it
were a separate disk, and addressed by the operating system accordingly.
Peripheral Device
A piece of equipment which performs a specific function associated with but not integral to a
computer. Examples: a printer, a modem, a CD-ROM.
Pitch (keyboard)
The distance between the centers of the letter keys of a keyboard.
Pixel
The smallest element of a display, a dot of color on your display screen. The more pixels per area the
clearer your image will appear.
POST
Power On Self Test. A program which is part of the BIOS which checks the configuration and
operating condition of your hardware whenever power is applied to your notebook. Status and error
messages may be displayed before the operating system is loaded. If the self test detects failures that
are so serious that operation can not continue, the operating system will not be loaded.
PPPoE
Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol (PPP),
which is used for connection on the phone line.
Program
An integrated set of coded commands to your computers telling your hardware what to do and how
and when to do it.
134 - Glossary
Protocol
Procedures and rules use to send and receive data between computers.
- Method of sending and receiving data
- Process used to handle communication errors
Conditions required for communication are organized in procedures for correct transfer of
information.
RAM
Random Access Memory. A hardware component of your LifeBook notebook that holds binary
information (both program and data) as long as it has the proper power applied to it.
RAM Module
A printed circuit card with memory and associated circuitry which allows the user to add additional
memory to the computer without special tools.
Reset
The act of reloading the operating system. A reset erases all information stored in RAM.
Restart
See Reset.
Resume
To proceed after interruption. In your notebook this refers to returning to active operation after having
been in one of the suspension states.
ROM
Read Only Memory. A form of memory in which information is stored by physically altering the
material. Data stored in this way can not be changed by your notebook and does not require power to
maintain it.
135 - Glossary
SDRAM
Synchronous Dynamic Random Access Memory.
Serial Port
A connection to another device through which data is transferred one bit at a time on a single wire with
any other wires only for control of the device not for transfer of data.
Shared key authentication
802.11 network authentication method in which the AP sends the client device a challenge text packet
that the client must then encrypt with the correct WEP key and return to the AP. If the client has the
wrong key or no key, authentication will fail and the client will not be allowed to associate with the
AP. Shared key authentication is not considered secure, because a hacker who detects both the cleartext challenge and the same challenge encrypted with a WEP key can decipher the key.
SSID
Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a
WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID
differentiates one WLAN from another, so all access points and all devices attempting to connect to a
specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can
provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security
to the network.
Standby
To make inoperative for a period of time. Your LifeBook notebook uses various suspension states to
reduce power consumption and prolong the charge of your battery.
Status Indicator
A display which reports the condition of some portion of your hardware.
136 - Glossary
Subnet mask
TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address
consists of the subnet address and the address of each computer. Subnet mask defines how many bits
of IP address comprise the subnet address. The same value shall be set among computers
communicating with each other.
SVGA
Super VGA.
S-Video
Super Video. A component video system for driving a TV or computer monitor.
System Clock
An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted
to provide time of day and date.
TCP/IP
Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely
used.
TFT
Thin Film Transistor – A technology for flat display panels which uses a thin film matrix of transistors
to control each pixel of the display screen individually.
UL
Underwriters Laboratories – An independent organization that tests and certifies the electrical safety
of devices.
137 - Glossary
USB
Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such
as game pads, pointing devices, printers, and keyboards to your computer.
VRAM
Video Random Access Memory. A memory dedicated to video display data and control.
WFM
Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of
business computing without sacrificing power and flexibility.
Wi-Fi Compatible
Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by
the WECA (Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of
wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA
Web site at: www.wirelessethernet.com.
WLAN
Wireless Local Area Network. A wireless interconnection of computers and peripherals within a
single limited geographic location which can pass programs and data amongst themselves.
138 - Glossary
Regulatory Information
Notice
Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the
equipment.
FCC NOTICES
Notice to Users of Radios and Television
This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet that is on a different circuit than the receiver.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF
emission limits governing this device.
•
•
•
•
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du
Canada.
139 - Regulatory Information
Appendix A: Wireless Device User’s Guide
FCC Regulatory Information
Please note the following regulatory information related to the optional wireless LAN device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however,
are much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices
are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and
recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
• On board an airplane, or
• In an explosive environment, or
• In situations where the interference risk to other devices or services is perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports,
hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the
equipment.
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user
documentation provided with the product. Any changes or modifications made to this device that are not expressly approved
by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio
or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting
cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any
140
interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized
resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to
comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor
environments, and the antenna of this device must be integral.
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must
accept any interference, including interference that may cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions,
it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure statement
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to
low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not
found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been
confirmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits
set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
141
Figure A-1. Ad Hoc Mode Network
DO NOT USE THE NOTEBOOK ON YOUR LAP. USING IT ON YOUR LAP WILL BLOCK THE AIR VENTS, WHICH
COULD RESULT IN DAMAGE TO THE SYSTEM AND ALSO CAN REDUCE THE RF EXPOSURE SAFETY
DISTANCE DURING RADIO OPERATION.
Minimum Separation Distance from Transmitting Antennas
The actual RF exposure from the Radio antenna largely depends on the distance between the antenna and the user. For mobile applications
where antenna is at least 20cms away from the user body, SAR (Specific Absorption Rate) tests are exempt and RF evaluation or Maximum
Permissible Exposure (MPE) applies.
This equipment has been evaluated for “Mobile Devices” RF safety and COMPLIES with International Guidelines for Electromagnetic
Radiation — Human Exposure standards: USA FCC OET 65 supplement C / IEEE C95.1 / European EN50371 / Australian RF Human
exposure standard 2003.
RF safety standard for most other countries are derived from one of the standards stated above.
Export restrictions
This product or software contains encryption code which may not be exported or transferred from the US or Canada without
an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES
003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu Computer Systems Corp. may invalidate the user's right to operate this
equipment.
Canadian Notice
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel
mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz
bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority)
of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
142
Before Using the Wireless LAN
This manual describes the procedures required to properly set up and configure the integrated Wireless
LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN
device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for
future reference.
Wireless LAN Device Covered by this Document
This document is applicable to systems containing Atheros® AR9280AL1E (AR5BHB92) Half
Mini-Card Wireless network card (802.11a/b/g/n)
Characteristics of the WLAN Device
• The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.
• The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating
license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower,
middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
• The WLAN device is capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and
IEEE802.11n (draft)
• The WLAN device is Wi-Fi certified and operate (as applicable) at a the maximum data rate of 540 Mbps
(theoretical) in IEEE802.11n (draft) mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in
IEEE802.11b mode.
• The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption.
• The Wireless LAN device is compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0,
and CCX4.0.
143 Before Using the Wireless LAN
Wireless LAN Modes Using this Device
Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between
multiple computers is established without a central wireless network device, typically known as Access
Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad
Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive
method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the
SSID, network authentication, and encryption key settings are identically configured on all computers in
the Ad Hoc network.
Figure 39. Ad Hoc Mode Network
144 Before Using the Wireless LAN
Access Point (Infrastructure) Mode
Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless
or wired network devices by communicating through an Access Point. In infrastructure mode, wireless
devices can communicate with each other or with a wired network. Corporate wireless networks operate
in infrastructure mode because they require access to the WLAN in order to access services, devices, and
computers (e.g., file servers, printers, databases).
Internet
Wired LAN
ADSL modem,
cable modem,
or similar
Access Point*
Wireless LAN
*An optional hub for a wired
LAN may be required depending
upon the type of access point used.
Figure 40. Access Point (Infrastructure) Mode Network
145 Before Using the Wireless LAN
How to Handle This Device
The WLAN device is a device that comes pre-installed in your mobile computer. Under normal
circumstances, it should not be necessary for you to remove or re-install it. The operating system that your
mobile computer comes with has been pre-configured to support the WLAN device.
• The Atheros WLAN device supports IEEE802.11a, IEEE802.11b, IEEE802.11g and IEEE802.11n.
• The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.
• Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz
frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a
radio which operates in the 5 GHz RF band.
• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in
IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects,
and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure
proper operation of the WLAN device.
Deactivating/Disconnecting the WLAN Device
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where
certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be
deactivated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the WLAN
icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio;
it continues to transmit and receive even though it’s not connected.).
BEFORE USING THE WIRELESS LAN DEVICE, YOU MUST FIRST INSTALL CLICKME! TO ENSURE THAT THE
CORRECT SOFTWARE FOR YOUR DEVICE IS INSTALLED. SEE “INSTALLING CLICKME!” ON PAGE 61. IN
ORDER TO RUN CLICKME!, THE WLAN SWITCH MUST BE IN THE ON POSITION.
146 Before Using the Wireless LAN
Deactivation Using the Wireless On/Off Switch
The WLAN device can be deactivated quickly and efficiently by
toggling the Wireless LAN/Bluetooth On/Off Switch to the Off
position. The switch has no effect
on non-Wireless LAN models.
The switch is located on the left
side of the system (Figure 41)
WLAN/Bluetooth Switch
Figure 41. Wireless LAN/Bluetooth On/Off Switch Location
Disconnection Using the Icon in the Taskbar
Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit
and receive even though it’s not connected.
Right-click the WLAN icon in the taskbar at the bottom right of your screen.
Choose Disconnect from a network.
Activating the WLAN Device
Activation of the WLAN device can be accomplished using the same methods as the deactivation process
• Using the Wireless On/Off Switch
• In Windows Vista, by right-clicking the WLAN icon then clicking Connect to a network.
In Windows XP, by right-clicking the WLAN icon then clicking View Available Wireless Networks.
147 Before Using the Wireless LAN
Configuring the Wireless LAN
The WLAN device can be configured to establish wireless network connectivity using the software that
is built into Windows Vista. Support for most industry standard security solutions is contained in this
software.
Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:
Configuring the WLAN Using Windows Vista
Click the Start button, then select Control Panel.
Select Connect to a network in the left panel.
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and
Sharing Center icon.
Select one of the listed networks, then click [Connect].
Follow the directions that appear.
In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel ->
Network and Sharing Center), and type in relevant keywords in the Search box.
Connecting to a Network
After you have configured your computer, you can connect to an active network by performing the
following steps:
Click on the WLAN icon in the system tray.
Select “Connect to a network”.
Select a network from the list that appears, and click the [Connect] button.
148 Configuring the Wireless LAN
Configuring the WLAN Using Windows XP
Procedure
Click the [Start] button, then select Control Panel.
Select “New Connection” wizard.
Enter any required information. It may be necessary to consult with your network administrator for some of the
information.
In the event you require assistance, go to [Start] -> Help and Support -> Networking and the Web. Select the
main topic in which you are interested, then type in relevant keywords in the Search box.
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network
Connections icon.
Click the [Next] button.
Select “Connect to the Internet”, then click [Next].
Depending upon what type of connection you would like to make, make a selection. For an infrastructure
network, select “Manually create a network profile. For ad hoc network, select “Choose from a list of Internet
service providers”.
Connection to the network
After you have configured your computer, you can connect to an active network by clicking on the
Wireless Network icon in the system tray:
149 Configuring the Wireless LAN
Troubleshooting the WLAN
Troubleshooting
Causes and countermeasures for troubles you may encounter while using your wireless LAN are described
in the following table. If you are unfamiliar with the steps required, consult your System Administrator or
go to [Start] -> Help and Support -> Networking and the Web
Problem
Unavailable
network
connection
Possible Cause
Possible Solution
Incorrect network
name (SSID) or
network key
Ad hoc connection: verify that the network names (SSID’s) and
network keys (WEP) of all computers to be connected have been
configured correctly. SSID’s and WEP key values must be identical on
each machine.
Access Point (Infrastructure) connection: set network name (SSID)
and network key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access
Point. Consult your network administrator for this value, if necessary.
Weak received
signal strength
and/or link quality
The WLAN
device has been
deactivated or
disabled
Ad hoc connection: Retry connection after shortening the distance to the
destination computer or removing any obstacles for better reception.
Access Point (Infrastructure) connection: Retry connection after
shortening the distance to the access point or removing any obstacles
for better sight.
Check if the wireless switch is turned On. In Windows XP, go to Start ->
Control Panel-> Network Connections and right-click on Wireless
Network Connection. If Enable appears at the top of the menu, click it
to enable the device. In Windows Vista, go to Start -> Control Panel, and
double-click on Windows Mobility Center. If the wireless network is off,
click the [Turn wireless on] button.
150 Troubleshooting the WLAN
Problem
Unavailable
network
connection
(continued)
Possible Cause
Possible Solution
The computer to
be connected is
turned off
Check if the computer to be connected is turned ON.
RF interference
from Access
Points or other
wireless
networks
The use of identical or overlapping RF channels can cause interference
with the operation of the WLAN device. Change the channel of your
Access Point to a channel that does not overlap with the interfering
device.
Wireless network
authentication
has failed
Re-check your Network Authentication, Encryption, and Security
settings. Incorrectly configured security settings such as an incorrectly
typed WEP key, a mis-configured LEAP username, or an incorrectly
chosen authentication method will cause the LAN device to associate but
not authenticate to the wireless network.
Incorrectly
configured
network settings
Recheck the configuration of your network settings.
Incorrect IP
address
configuration
This only applies to networks using static IP addresses. Please contact
your network administrator for the correct settings.
151 Troubleshooting the WLAN
WLAN Specifications
Specifications
Item
Specification
Type of network
The Atheros AR9280AL1E (AR5BHB92) Half Mini-Card Wireless network card conforms to IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n, Wi-Fi based*
Transfer rate
(Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined
Active frequency
Typical operating distances**
Number of channels
•
•
•
802.11n (draft): 2.4 GHz or 5 GHz
•
•
•
•
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps
•
•
•
802.11a: 8 independent channels
802.11b/g: 2400~2473 MHz
802.11a: 4900 ~ 5850 MHz
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps
802.11n (draft): Operating distance to be determined upon release of standard.
802.11b/g: 11 channels, 3 non-overlapping channels
802.11n (draft):
2.4 GHz - 3 non-overlapping channels when Channel Bonding is not used; 2
non-overlapping channels when Channel Bonding is used.
5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding
Security
Encryption Types - WEP, TKIP, AES***, WPA, WPA 1.0, WPA 2,CCX compliant
Encryption Key lengths Supported: 64 bits and 128 bits 802.1x/EAP
Maximum recommended number
of computers to be connected over
wireless LAN (during ad hoc
connection)
10 units or less ****
152 WLAN Specifications
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of
wireless LAN (Wi-Fi Alliance) has been passed.
** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective
material, or interference from external RF sources.
*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104
bits after subtracting the fixed length of 24 bits.
**** Depending on practical environments, the allowable number of computers to be connected may be decreased.
153 WLAN Specifications
Using the Bluetooth Device
The Integrated Bluetooth module (EYTF3CSFT) is an optional device available for Fujitsu mobile
computers.
What is Bluetooth
Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop
computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks
(PANs) between devices in short-range of each other.
THE WIRELESS LAN/BLUETOOTH ON/OFF SWITCH WILL POWER OFF BOTH THE OPTIONAL WIRELESS
LAN AND BLUETOOTH DEVICES AT THE SAME TIME. TO ENABLE OR DISABLE EITHER ONE OF THE
DEVICES INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:
Slide the Wireless LAN/Bluetooth on/off switch to On position.
In the Start > All Programs > Bluetooth > Bluetooth Settings.
Click on Options under the Bluetooth menu, then click on the [Bluetooth Radio Power] button.
Click [OK].
Where to Find Information About Bluetooth
The Bluetooth module contains a robust Help user’s guide to assist you in learning about operation of the
Bluetooth device.
Windows XP: To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select
Bluetooth, then select User’s Guide.
Windows Vista: To access the Help file, click [Start] -> All Programs, and click on Bluetooth, then select
User’s Guide.
For additional information about Bluetooth Technology, visit the Bluetooth Web site at:
www.bluetooth.com.
154 Using the Bluetooth Device
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The Bluetooth antenna is located above the [Backspace/Delete] key and is exempt from minimum
distance criteria due to its low power.
The transmitters in this device must not be co-located or operated in conjunction with any other antenna
or transmitter.
Canadian Notice
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed written permission
from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and
Industry Canada and the warranty.
155 Using the Bluetooth Device
Using the FM Transmitter
Inside of your mobile computer there is an FM Transmitter that allows you to play MP3 songs from your
computer on an FM radio or through your car radio speakers.
Getting started with the FM Transmitter
To begin using the FM Transmitter, perform the following steps:
Click Start > All Programs, and select FM Transmitter from the list that appears. FM Transmitter and Help
selections will appear.
Click on FM Transmitter. The FM Transmitter window will appear on the display and an FM Transmitter icon will
be placed in the task tray.
Using the software
Switch on your car radio and tune your car radio to a frequency that is not being used by a radio station. Note
that if you drive into an area where a radio station transmits on the same frequency you are using for the FM
Transmitter, you may have to use another frequency.
Select a transmit frequency using the Frequency Select slider bar in the FM Transmitter window, or use the
buttons located on either side of the [Frequency Select] slider bar to select a transmit frequency.
Click the [On] button to enable FM radio transmission.
Register and Delete a Radio Frequency
Register a Radio Frequency
You can register up to four of your favorite radio frequencies. To do so, follow the steps below:
THE FREQUENCY RANGE IN WHICH THE TRANSMITTER OPERATES IS BETWEEN 89 MHZ AND 98 MHZ.
WHEN SELECTING YOUR RADIO FREQUENCIES, BE SURE THEY ARE WITHIN THAT RANGE.
156 Using the FM Transmitter
1
Adjust the Frequency Select slider bar to the frequency you want to register.
Click the [Add] button.
When the Favorites window appears, select an icon.
Enter a registration name in the Name: box, then click the [Save] button. The registered frequency is now
displayed under Memory. Three icons are displayed under Memory, although up to four frequencies can be
registered. To reveal the additional frequency, use the arrow buttons on either side of the memory icons.
Delete a Radio Frequency
To delete a registered frequency, perform the following steps:
Select the icon representing the frequency you want to delete under Memory.
Click the [Del] button. When asked to verify the deletion, click [Yes]. The icon is removed from Memory.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The FM Transmitter antenna is located in the base of the unit and is exempt from minimum distance
criteria due to its low power.
The transmitters in this device must not be co-located or operated in conjunction with any other antenna
or transmitter.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed written permission
from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and
Industry Canada and the warranty.
157 Using the FM Transmitter
Appendix B: Fingerprint Sensor Device
Introducing the Fingerprint Sensor Device
Your system has a fingerprint sensor device at the bottom right of the display screen (when the computer
is in notebook mode), or at the top left (when the system is in tablet mode).
Fingerprint
Sensor Device
Figure 42. Fingerprint sensor
With a fingerprint sensor, you can avoid having to enter a username and password every time you want to:
• Log onto Windows
• Resume from sleep mode
• Cancel a password-protected screen saver
• Log into websites that require a username and password
158
After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the
sensor for the system to recognize you.
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all
Windows, applications, and on-line passwords.
OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to
the Windows desktop. This device results in a secure authentication system for restricting access to your
computer, applications, web sites, and other password-protected resources.
OmniPass presents a convenient graphical user interface, through which you can securely manage
passwords, users, and multiple identities for each user.
Getting Started
This section guides you through the preparation of your system for the OmniPass fingerprint recognition
application. You will be led through the OmniPass installation process. You will also be led through the
procedure of enrolling your first user into OmniPass.
Installing OmniPass
The OmniPass application is not initially installed on your system In order to install the application, go to
the “3rd Party Software” folder on your desktop.
System Requirements
The OmniPass application requires space on your hard drive; it also requires specific Operating Systems
(OS’s). The minimum requirements are as follows:
• Windows XP Professional operating system
• At least 35 MB available hard disk space
159 - Introducing the Fingerprint Sensor Device
Installing the OmniPass Application
To install OmniPass, go to the “3rd Party Software” folder on your desktop. Double-click the OmniPass
Installation icon and follow the instructions to install the application.
Verifying Information about OmniPass
After you have completed installing OmniPass and restarted your system, you may wish to check the
version of OmniPass on your system.
To check the version information of OmniPass:
From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the
lower right corner of the screen),
or,
Click the [Start] button, select Settings, and click Control Panel (if you are using Windows XP you will see the
Control Panel directly in the Start menu; click it, then click Switch to Classic View). Double-click Softex
OmniPass in the Control Panel, and the OmniPass Control Center will appear. If it does not appear, then the
program is not properly installed,
or,
Click the [Start] button, select Programs, and from the submenu select the Softex program group, from that
submenu click OmniPass Control Center.
Windows XP: Select the About tab at the top of the OmniPass Control Panel. The About tab window appears
with version information about OmniPass.
Windows Vista: Version detail appears in the left pane.
160 - Introducing the Fingerprint Sensor Device
Uninstalling OmniPass
FOR UNINSTALLATION, OMNIPASS REQUIRES THAT THE USER UNINSTALLING OMNIPASS HAVE
ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE
ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE
PROCEEDING WITH OMNIPASS UNINSTALLATION.
To remove the OmniPass application from your system:
Windows XP:
Click Start on the Windows taskbar. Select Settings, and then Control Panel.
Double-click Add/Remove Programs.
Select OmniPass, and then click Change/Remove.
Follow the directions to uninstall the OmniPass application.
Once OmniPass has finished uninstalling, reboot your system when prompted.
Windows Vista:
Click Start on the Windows taskbar. Select Control Panel.
Double-click Programs and Features.
Select OmniPass, and then click Uninstall.
Follow the directions to uninstall the OmniPass application.
Once OmniPass has finished uninstalling, reboot your system when prompted.
User Enrollment
Before you can use any OmniPass features you must first enroll a user into OmniPass.
Master Password Concept
Computer resources are often protected with passwords. Whether you are logging into your computer,
accessing email, e-banking, paying bills online, or accessing network resources, you often have to supply
credentials to gain access. This can result in dozens of sets of credentials that you have to remember.
161 - Introducing the Fingerprint Sensor Device
During user enrollment a "master password” is created for the enrolled user. This master password
“replaces” all other passwords for sites you register with OmniPass.
Example: A user, John, installs OmniPass on his system (his home computer) and enrolls an OmniPass
user with username “John_01” and password “freq14”. He then goes to his webmail site to log onto his
account. He inputs his webmail credentials as usual (username “John_02” and password “lifebook”), but
instead of clicking [Submit], he directs OmniPass to Remember Password. Now whenever he returns to
that site, OmniPass will prompt him to supply access credentials.
John enters his OmniPass user credentials (“John_01” and “freq14”) in the OmniPass authentication
prompt, and he is allowed into his webmail account. He can do this with as many web sites or password
protected resources he likes, and he will gain access to all those sites with his OmniPass user credentials
(“John_01” and “freq14”). This is assuming he is accessing those sites with the system onto which he
enrolled his OmniPass user. OmniPass does not actually change the credentials of the password protected
resource. If John were to go to another computer without he OmniPass account to access his webmail, he
would need to enter his original webmail credentials (“John_02” and “lifebook”) to gain access. If he
attempts his OmniPass credentials on a system other than a system he’s enrolled on, he won’t gain access.
THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR
OMNIPASS. IF YOU DESIRE
SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT.
ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH
Basic Enrollment
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified
otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do
not see the Enrollment Wizard, you can bring it up by clicking [Start] on the Windows taskbar; select
Programs; select Softex; click OmniPass Enrollment Wizard (or, in Windows Vista, select OmniPass
Control Center).
Click [Enroll a new user].
162 - Introducing the Fingerprint Sensor Device
If you have already registered:
Click [Enroll an existing Windows user], then enter your password to continue.
If you have not yet registered:
Click [Create and Enroll a new Windows user] to proceed to username and password verification. Enter the
password you use to log in to Windows. This will become the “master password” for this OmniPass user. In most
cases, the Domain: value will be your Windows computer name. In a corporate environment, or when
accessing corporate resources, the Domain: may not be your Windows computer name.
Click [Next] to continue.
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your system and streamline the authentication
procedure.
You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click
the system tray OmniPass icon. Click on Run user management wizard, then select Add a new user to
OmniPass. Select either Enroll an existing Windows user or Create and enroll a new Windows user,
as appropriate.
During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have
already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked
by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled
and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to
enroll and click [Next].
It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before
OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen
times out, click [Back] to restart the fingerprint enrollment process.
Your system has a “swipe” fingerprint sensor. A swipe sensor is small and resembles a skinny elongated
rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second
163 - Introducing the Fingerprint Sensor Device
knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger
screen has a [Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how
your fingerprint is captured, proceed to enroll a finger.
Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically
appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were
having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture
window and the text Verification Successful under the capture window.
THE ENROLLMENT PROCEDURE REQUIRES THAT UOU ENROLL AT LEAST TWO FINGERS, SO REPEAT THE
STEPS ABOVE WITH A SECOND FINGER.T.
After you have enrolled your fingerprints and returned to the Omnipass Control Center, you will presented with
a menu containingthe following selections:
• Manage Your Passwords
• Change Your User Settings
• Change Your System Settings
• Run User Management Wizard
Each of these selections offers a variety of tools to manage your passwords and notifications. Click on
each of the menu items to modify the OmniPass application to suit your individual needs.
164 - Introducing the Fingerprint Sensor Device
Using OmniPass
You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your
authentications.
Password Replacement
You will often use the password replacement function. When you go to a restricted access website (e.g.,
your bank, your web-based email, online auction or payment sites), you are always prompted to enter your
login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials.
The next time you go to that website, you can authenticate with your fingerprint to gain access.
OmniPass Authentication Toolbar
After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows
Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass
authentication system is invoked. The OmniPass authentication system may be invoked frequently: during
Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from sleep
or hibernate, when unlocking a password-enabled screensaver, during password replacement for
remembered site or application logins, and more. When you see this toolbar, OmniPass is prompting you
to authenticate.
The Logon Authentication window indicates what OmniPass-restricted function you are attempting. The
icons in the lower left (fingerprint and key) show what authentication methods are available to you.
Selected authentication methods are highlighted while unselected methods are not. When you click the
icon for an unselected authentication method, the authentication prompt associated with that method is
displayed.
When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for the
fingerprint capture window or your master password for the master password prompt (the key icon).
165 - Introducing the Fingerprint Sensor Device
Remembering a Password
OmniPass can remember any application, GUI, or password protected resource that has a password
prompt.
Using the following procedure, you can store a set of credentials into OmniPass. These credentials will
then be linked to your “master password” or fingerprint.
Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt,
enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter],
[Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember Password
from the submenu. The Windows arrow cursor will change to a golden key OmniPass cursor. Click the
OmniPass cursor in the login prompt area, but don’t click [Login] or [Submit].
Associating a Friendly Name
After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a
“friendly name” for this site. You should enter something that reminds you of the website, the company,
or the service you are logging into. In its secure database, OmniPass associates this friendly name with
this website.
Additional Settings for Remembering a Site
When OmniPass prompts you to enter a “friendly name” you also have the opportunity to set how
OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles a
remembered site.
The default setting is Automatically click the “OK” or “Submit” button for this password protected
site once the user is authenticated. With this setting, each time you navigate to this site OmniPass will
prompt you for your master password or fingerprint authentication device. Once you have authenticated
with OmniPass, you will automatically be logged into the site.
Less secure is the option to Automatically enter this password protected site when it is activated. Do
not prompt for authentication. Check the upper box to get this setting, and each time you navigate to
this site OmniPass will log you into the site without prompting you to authenticate.
166 - Introducing the Fingerprint Sensor Device
THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS
SETTING, YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE
SITE. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR OMNIPASS USER LOGGED IN,
ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN
AUTOMATIC ACCESS.
If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master
password or fingerprint authentication device. Once you have authenticated with OmniPass your
credentials will be filled in to the site login prompt, but you will have to click the website [OK], [Submit],
or [Login] button to gain access to the site.
Click [Finish] to complete the remember password procedure. The site location, the credentials to access
the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure
database. The OmniPass authentication settings (Settings for this Password Site) can always be changed
in Vault Management.
Logging in to a Remembered Site
Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined
by Settings for this Password Site and can be changed in Vault Management.
The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and
all other password protected resources.
With Master Password
Once you return to a site you have remembered with OmniPass, you may be presented with a master
password prompt. Enter your master password and you will be allowed into the site.
167 - Introducing the Fingerprint Sensor Device
Logging into Windows with a Fingerprint Device
When logging into Windows with a fingerprint device, the fingerprint capture window will now appear
next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will
be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have
used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above.
IF A MACHINE IS LOCKED AND OMNIPASS DETECTS A DIFFERENT USER LOGGING BACK IN WITH A
FINGERPRINT, THE FIRST USER WILL BE LOGGED OUT AND THE SECOND USER LOGGED IN.
In Windows XP, your login options must be set either for classic login, or for fast user switching and logon
screen to be enabled to use your fingerprint to log on to Windows. To change this go to Control Panel,
select User Accounts and then click Change the way users log on or off. If your Windows screensaver
is password protected, the fingerprint capture window will now appear next to screensaver password
dialog during resume. You can authenticate to your screensaver password prompt with your enrolled
finger.
Password Management
OmniPass provides an interface that lets you manage your passwords. To access this GUI, double-click
the OmniPass key in the system tray. Click Vault Management; you will be prompted to authenticate.
Once you gain access to Vault Management, click Manage Passwords under Vault Settings. You will
see the Manage Passwords interface, with a list of friendly names.
You can view the credentials stored for any remembered website by highlighting the desired resource
under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an
account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under
Password Protected Dialog and click Delete Page. You will be prompted to confirm the password
deletion.
168 - Introducing the Fingerprint Sensor Device
The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or
directly logs you into the remembered site.
OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember
Password on an already remembered site.
The exception to the above rule is when resetting the Windows password. If your password is reset in
Windows, the next time you login to Windows, OmniPass will detect the password change and prompt
you to “Update” or “Reconfirm” the password with OmniPass. Enter your new Windows password in the
prompt and click [OK]. Your OmniPass "master password" will still be your Windows password.
OmniPass User Identities
Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com and
boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to
remembering one account per site.
To create and manage identities, double-click the OmniPass key in the system tray. Click Vault
Management; OmniPass will prompt you to authenticate. Once you gain access to Vault Management,
click Manage Identities under Vault Settings. You can only manage the identities of the currently logged
in OmniPass user
To add a new identity, click New Identity or double-click Click here to add a new identity. Name the
new identity and click [OK], then click [Apply]. You can now switch to the new identity and start
remembering passwords.
To delete an identity, highlight the identity you want to delete and click [Delete Identity], then click
[Apply].
WHEN YOU DELETE AN IDENTITY, ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD
PROTECTED DIALOGS ARE LOST.
169 - Introducing the Fingerprint Sensor Device
To set the default identity, highlight the identity you want as default and click [Set as Default]; click
[Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will
automatically be logged in to the default identity for that OmniPass user. You can choose the identity with
which you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your username in the User Name: field. Press [Tab] and see
that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you will see
the pull-down menu in the Identity: field. Select the identity to login as, then click [OK].
Switch User Identity
To switch identities at any time, right-click the OmniPass system tray icon and click Switch User Identity
from the submenu. The Switch Identity dialog will appear. Select the desired identity, then click [OK].
Identities and Password Management
On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center,
there is a pull-down selection box labeled, Identity. This field lets you choose which identity you are
managing passwords for. When you select an identity here, only those password protected dialogs that are
associated with that identity are shown. You can perform all the functions explained in “Password
Management” on page 168.
Configuring OmniPass
This section gives an overview of both the Export/Import function and the OmniPass Control Center.
Exporting and Importing Users
YOU CANNOT IMPORT A USER INTO OMNIPASS IF THERE ALREADY IS A USER WITH THE SAME NAME
ENROLLED IN OMNIPASS.
170 - Introducing the Fingerprint Sensor Device
Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export
process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All
OmniPass data for a user is backed up to a single encrypted database file. During the import process, the
Windows login of the exported user is required. If the proper credentials cannot be supplied, the user
profile will not be imported.
• YOU SHOULD PERIODICALLY EXPORT YOUR USER PROFILE AND STORE IT IN A SAFE PLACE. IF
ANYTHING HAPPENS TO YOUR SYSTEM, YOU CAN IMPORT YOUR
OMNIPASS PROFILE TO A NEW
SYSTEM AND HAVE ALL YOUR REMEMBERED SETTINGS AND FINGERPRINTS INSTANTLY.
• YOU DON'T FORGET THE WINDOWS LOGIN CREDENTIALS WHEN EXPORTING. WHEN YOU EXAMINE
THE IMPORTATION, YOU ARE PROMPTED FOR AUTHENTICATION.
ALLOW A USER PROFILE TO BE IMPORTED ARE THE
EXPORTED USER.
THE CREDENTIALS THAT WILL
WINDOWS LOGIN CREDENTIALS OF THE
THEY ARE THE CREDENTIALS THAT HAD TO BE SUBMITTED WHEN THE USER
YOU WILL NEED USER NAME, PASSWORD, AND DOMAIN.
PROFILE WAS EXPORTED.
Exporting an OmniPass User Profile
To export a user, open the OmniPass Control Center, and click Import/Export User under Manage
Users.
Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon successfully
authentication, you must name the OmniPass user profile and decide where to save it. An .opi file is
generated, and you should store a copy of it in a safe place.
This .opi file contains all your user specific OmniPass data, and it is both encrypted and password
protected. This user profile does NOT contain any of your encrypted data files.
Importing an OmniPass User Profile
To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under
Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File
(*.opi) and click [Next]. OmniPass will then prompt you to browse for the file you had previously
exported (.opi file). When you select the .opi file for importation, OmniPass will prompt you for
authentication. The credentials that will allow a user profile to be imported are the Windows login
171 - Introducing the Fingerprint Sensor Device
credentials of the exported user. They are the credentials that had to be submitted when the user profile
was exported. You will need User Name, Password, and Domain. If you don’t remember the value for
Domain, in a PC or SOHO environment Domain should be your computer name.
OmniPass will notify you if the user was successfully imported.
Things to Know Regarding Import/Export
• Assume you export a local Windows User profile from OmniPass. You want to import that profile
to another machine that has OmniPass. Before you can import the profile, a Windows user with the
same login credentials must be created on the machine importing the profile.
Example: I have a Windows user with the username “Tom” and the password “Sunshine” on my
system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my
passwords to new system. I export Tom’s OmniPass user profile. I go to my new system and using
the Control Panel I create a user with the username "Tom" and the password "Sunshine". I can now
successfully import the OmniPass user data to the new system.
• If you export an OmniPass-only user, you can import that user to any computer running OmniPass,
provided that a user with that name is not already enrolled in OmniPass.
• If you attempt to import a user profile who has the same name as a user already enrolled in
OmniPass, the OmniPass import function will fail.
OmniPass Control Center
This section will explain functions within the OmniPass Control Center that weren’t explained earlier.
You can access the OmniPass Control Center any of three ways:
• Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lowerright corner of the desktop)
• Click the Start button; select the Programs group; select the Softex program group; and click the
OmniPass Control Center selection.
172 - Introducing the Fingerprint Sensor Device
• Open the Windows Control Panel (accessible via Start button --> Settings --> Control Panel) and
double-click the Softex OmniPass icon.
User Management
The User Management tab has two major interfaces: Add/Remove User and Import/Export User.
Import/Export User functionality is documented in “Exporting and Importing Users” on page 170.
Add/Remove User functionality is straightforward.
If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The
Enrollment Wizard is documented in “User Enrollment” on page 161.
If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate
with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you
to confirm user removal. Click [OK] to complete user removal.
REMOVING A USER WILL AUTOMATICALLY DESTROY ALL OMNIPASS DATA ASSOCIATED WITH THAT USER.
ALL IDENTITIES AND CREDENTIALS ASSOCIATED WITH THE USER WILL BE LOST.
IF YOU’RE SURE YOU WANT TO REMOVE THE USER, WE RECOMMEND YOU EXPORT THE USER PROFILE.
User Settings
The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings
allow users to customize OmniPass to suit their individual preferences. Under User Settings (Audio
Settings and Taskbar Tips) you can set how OmniPass notifies the user of OmniPass events (e.g.,
successful login, access denied, etc.). The details of each setting under the Audio Settings and Taskbar
Tips interfaces are self-explanatory.
The Enrollment interface allows you to enroll fingerprints. To enroll additional fingerprints, click Enroll
Authentication Device, and authenticate with OmniPass. Select the fingerprint recognition device in the
Select Authentication Device screen (it should already be marked by a green check if you have a finger
enrolled) and click [Next].
173 - Introducing the Fingerprint Sensor Device
System Settings
The OmniPass Startup Options interface can be found in the System Settings tab. With these options you
can specify how your OmniPass Logon is tied to your Windows Logon.
The first option, Automatically log on to OmniPass as the current user, will do just as it says; during
Windows login, you will be logged on to OmniPass using your Windows login credentials. If the user
logging into Windows was never enrolled into OmniPass, upon login no one will be logged on to
OmniPass. This setting is appropriate for an office setting or any setting where users must enter a
username and password to log into a computer. This is the default setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login
once you have logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be
logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in
User from the right-click menu.
Troubleshooting
You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will
need administrative privileges to do that. Once the Windows user is created, you can add that user to
OmniPass using the same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local
security settings. You can do this by going to Start, Control Panel, Administrative Tools, and Local
Security Settings. Expand Local Policies, expand Security Options, and double-click Network Access:
Sharing and Security Model for Local Accounts. The correct setting should be Classic - Local Users
Authenticate as Themselves.
174 - Introducing the Fingerprint Sensor Device
Cannot add a User with a Blank Password to OmniPass
If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust
your local security settings. First attempt the procedure explained in the Cannot add Windows user to
OmniPass section. If the difficulties persist, then try the following procedure.
Click [Start] > Control Panel > Administrative Tools > Local Security Settings. Expand Local
Policies, expand Security Options, and double-click Accounts: Limit local account use of blank
passwords to console login only. This setting should be set to Disabled.
Dialog appears after OmniPass authentication during Windows Logon
After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You
authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs you
into Windows. You may, during this OmniPass authentication, see a Login Error dialog box.
This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied
(username and password). This could happen for any of the following reasons:
• Your Windows password has changed
• Your Windows account has been disabled
If you are having difficulties due to the first reason, you will need to update OmniPass with your changed
Windows account password. Click Update Password and you will be prompted with a dialog to
reconfirm your password.
Enter the new password to your Windows user account and click [OK]. If the error persists, then it is
unlikely the problem is due to your Windows user account password changing.
175 - Introducing the Fingerprint Sensor Device
Index
guide 58
setup utility 57
Bluetooth 154
Boot Sequence 56
Booting the System 58
Built-in Microphone 19
Button Functions 48
Button Icons 49
About This Guide 12
AC
adapter 53
plug adapters 111
Air Vents 26, 28
Application Buttons 1 and 2 22
Auto/Airline Adapter 53, 54
Automatically Downloading Driver Updates 105
CF Card
installing 77
removing 77
Click Me! 61
clicking 42
Compact Flash (CF) Cards 76
Configuration Label 115
Contact Information 13
Controls and Connectors 16
Conventions Used in the Guide 12
Ctrl-Alt-Del Button 20
Cursor Buttons
button control adjustment 43
clicking 42
double-clicking 42
dragging 42
scrolling 43
using 41
Cursor Control 22
Battery 69
care 112
cold-swapping 72
conserving power 63
dead 91
faulty 91
hot-swapping 72
increasing life 112
lithium ion battery 69
low 71
problems 91
recharging 70
replacing 72
shorted 72
Sleep mode 71
Battery Latch 28
BIOS
176
Cursor Keys 40
user enrollment 161
using OmniPass 165
Fujitsu Contact Information 13
Fujitsu Driver Update utility 62, 105, 122
Fujitsu LifeBook
cleaning 108
storing 110
traveling 110
Fujitsu Shopping Online 14
Fujitsu Zoom Utility 35
Function Button 22
Function Key
Fn 40
DC in connector 16
DC Output Cable 53
DC Power Jack 26, 53
Device Ports 78
Display Panel 19, 32
brightness 34
Changing Touch Settings 35
opening 32
problems 92, 93
Double-Clicking 42
Down and Up Buttons 22
dragging 42
Drivers and Application Restore CD 100
Glossary 124
Error Messages 95
External Monitor/LAN Adapter Cable Connector 20
External Video Port 80
External Video port 17
Handling the System 37
Hard Disk Drive Passwords 56
Headphone Jack 16, 23, 80
Hibernation Feature 65
disable/enable 65
FDU 62, 105, 122
Fingerprint Sensor 19
Fingerprint Sensor Device 158
enrolling a fingerprint 163
getting started 159
installing OmniPass 159
logging into a remembered site 167
OmniPass authentication toolbar 165
password replacement 165
remembering a password 166
uninstalling OmniPass 161
Keyboard 19, 39
problems 88
Keyboard Lights 19
LAN Jack 82
Left Button 20
LifeBook Application/Tablet Buttons 19
LifeBook Application/Tablet PC Buttons 48
Lithium ion Battery 27
177
Local Area Network (LAN) 17
Right Button 20
RJ-45 82
Media Care 113
Microphone Jack 16, 23, 80
Microsoft Works 123
scrolling 43
SD Card
installing 75
removing 75, 77
slot 24
Secure Digital Card
removing 75
Secure Digital Cards 74
Secure Digital Slot 16
Sleep Mode 63, 64
Specifications 115
audio 117
chipset 116
device ports 118
dimensions and weight 120
environmental requirements 120
keyboard 119
mass storage device options 117
memory 116
microprocessor 116
power 119
video 116
Start Key 39
Status Indicator Panel 20, 29
Battery Charge/DC-In Indicator 30
Battery Level Indicator 30
CapsLock 31
Hard Disk Drive access indicator 31
Hard Drive Access Indicator 31
NumLk 31
Power Indicator 31
Pen 19
Port Replicator 20
connector 83
Power
AC adapter 53
Auto/Airline adapter 53
failure 90
management 63
off 66
on 55
problems 92
sources 53
Power Management 63
Power On Self Test 55, 95
Pre-Installed Software 121
Adobe Acrobat Reader 122
ArcSoft WebCam Companion 121
Google Toolbar 122
manuals 122
Microsoft Origami 121
Microsoft Works 121
Registration 61
Regulatory Information 139
Restarting 65
Restoring Your Pre-installed Software 100
178
ScrLk 31
Suspend/ Resume button 16
Warranty 14
Web Camera 19
Windows Power Management 65
Windows Vista
configuring the WLAN 148
restoring the Operating System 101
starting the first time 58
Windows XP
configuring the Wireless LAN 149
restoring the Operating System 101
starting the first time 60
Wireless LAN
before using 143
characteristics 143
connection to the network 149
deactivating/disconnecting 146
modes 144
specifications 152
troubleshooting 150
Wireless LAN On-Off Switch 17
Wireless LAN/Bluetooth On/Off Switch 24
Tablet Configuration 33
Touch Screen
calibrating 46
clicking 45
Double-Clicking 45
dragging 46
right-clicking 45
using 44
Troubleshooting 84
audio 86, 87
hard disk drive 88
mouse 88
optical drive 87
Port Replicator 88
power 89
USB 89
U800
handling the system 37
Using in Notebook Configuration 37
Using in Tablet Configuration 37
Universal Serial Bus Ports 78
USB 78
USB 2.0 Ports 16, 23
Using the Touch Screen 44
Volume Control 17, 24
Volume control 47
179

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 180
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:75ae7245-4e4c-4806-9ee8-d6c4824a0875
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:07:09 14:12:57+10:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:11:27 10:15:42+11:00
Metadata Date                   : 2008:11:27 10:15:42+11:00
Document ID                     : uuid:abde108b-09cb-4457-8fa8-a32608d131b2
Format                          : application/pdf
Title                           : Microsoft Word - Appendix G_User Manual.doc
Creator                         : donna3
Author                          : donna3

EXIF Metadata provided by EXIF.tools