Fujitsu Client Computing WB0097 FUJITSU STYLISTIC Q736 User Manual

Fujitsu Limited FUJITSU STYLISTIC Q736

User Manual

SystemOperating ManualFUJITSU Tablet STYLISTIC Q736
Contact address in North AmericaFUJITSU AMERICA INC.1250 East Arques Avenue, Sunnyvale,CA 94085-3470, U.S.A.Telephone: 800 831 3183 or 408 746 6000"http://solutions.us.fujitsu.com""http://solutions.us.fujitsu.com/contact"Have a question? Email us at: "AskFujitsu@us.fujitsu.com"Copyright©2015Fujitsu America, Inc. All rights reservedB5FK-5521-01ENZ0-00
FUJITSU Tablet STYLISTIC Q736Operating ManualDeclarations of conformity 7Fujitsu Contact Information 8Ports and controls 10Important notes 14First-time setup of your device 18WorkingwiththeTabletPC 23Accessories for your Tablet PC(optional) 46Security functions 66Connecting external devices 77Settings in BIOS Setup Utility 81Troubleshooting and tips 84Technical data 93Manufacturer’s notes 99Declarations of conformity 102FCC and IC Regulatory Information 103Appendix 107Index 122
Copyright and Trademark InformationFujitsu America, Incorporated has made every effort to ensure the accuracy and completenessof this document; however, as ongoing development efforts are continually improving thecapabilities of our products, we cannot guarantee the accuracy of the contents of thisdocument. We disclaim liability for errors, omissions, or future changes.Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limitedor its subsidiaries in the United States and other countries.Intel and Intel Core are trademarks or registered trademarks of Intel Corporation orits subsidiaries in the United States and other countries.Microsoft and Windows are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.The ExpressCard word mark and logo are owned by the Personal ComputerMemory Card International Association (PCMCIA) and any use of such marks byFujitsu America, Incorporated is under license.Google is a trademark or registered trademark of Google Incorporated.Bluetooth is a trademark of Bluetooth SIG, Inc., USA.OmniPass is a trademark of Softex, Inc.Roxio is a trademark of Roxio, a division of Sonic Solutions.PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp.Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.
ContentsContentsDeclarations of conformity ............................................................. 7Fujitsu Contact Information ............................................................ 8Notational conventions .................................................................. 9Portsandcontrols ..................................................................... 10Importantnotes ........................................................................ 14Safetyinstructions ...................................................................... 14Additional safety notes for devices with wireless components . . ............................. 15Protecting the displayscreen ............................................................ 15Energysaving .......................................................................... 15Energy saving under Windows ....................................................... 15Traveling with your TabletPC ............................................................ 16Beforeyoutravel ................................................................... 16Transporting the TabletPC ........................................................... 17Cleaning the TabletPC .................................................................. 17First-timesetup ofyourdevice ......................................................... 18Unpacking and checking the device . . . ................................................... 18Choose a location . ...................................................................... 19Mounting rubber feet (only for device options with palm vein sensor) . . . ..................... 19Connecting the AC adapter . . . ........................................................... 20Switching on the device for the firsttime .................................................. 21Installing Bonus Apps . . . . . ........................................................... 22Working with theTabletPC ............................................................ 23Status indicators ........................................................................ 23Switching theTabletPCon .............................................................. 25Programing theON/OFFbutton ...................................................... 26Switching theTabletPCoff .............................................................. 26Handwriting recognition .................................................................. 26Touchscreen ............................................................................ 27Select displayorientation(portraitorlandscapeformat) .................................... 28Using fingers ........................................................................... 28Calibrate the Dual Digitizer for finger-based operation of the device. ..................... 28Actions with one finger (Windows 8.1 Modern) . ........................................ 29Actions with one finger (Windows 7 / Windows 8.1 Desktop) . . . ......................... 31Actions with two fingers (Windows 7 / Windows 8.1 Desktop) . . ......................... 32Using thestylus ......................................................................... 34Stylus location ...................................................................... 35Adjustingthestylus .................................................................. 35Calibratingthestylus ................................................................ 36Securingthestylustether(optional) ................................................... 36Tabletbuttons .......................................................................... 37Webcam ............................................................................... 37Rechargeablebattery ................................................................... 38Chargingandmaintainingthebattery ................................................. 38Using the energy saving functions . ....................................................... 39Memorycards .......................................................................... 40Supportedformats .................................................................. 40Insertingthememorycard ........................................................... 40Fujitsu 3
ContentsRemovingthememorycard .......................................................... 41SIMcard ............................................................................... 42InsertingaSIMcard ................................................................. 42Removinga SIMcard ............................................................... 43WirelessLAN/Bluetooth/4G/LTE/NFCwirelesscomponents ................................. 43Switching the wireless components on and off ......................................... 43ConfiguringWLANaccess ........................................................... 43FurtherinformationonWLANandBluetooth ........................................... 44AccessviaUMTS ................................................................... 44AccessviaWirelessWAN ............................................................ 44Accessvia4G ...................................................................... 44NFC (Near Field Communication, optional) . . . ......................................... 44Ethernet and LAN (only with performance docking cradle, keyboard docking station or powerkeyboard docking station) ................................................................ 45GPS ................................................................................... 45Accessories for your Tablet PC (optional) . ............................................. 46Your performance docking cradle (optional) . . ............................................. 47Performance docking cradle components . ............................................. 47Settinguptheperformancedockingcradle ............................................ 47Connecting the Tablet PC to the performance docking cradle . .......................... 48Disconnecting the Tablet PC from the performance docking cradle . . . ................... 49Keyboard docking station or power keyboard docking station (optional) . . . ................... 50Ports on the keyboard docking station or power keyboard docking station . ............... 51Connecting the Tablet PC to the keyboard docking station or power keyboard dockingstation .............................................................................. 53Separating the Tablet PC from the keyboard docking station or power keyboard dockingstation .............................................................................. 54Removable rechargeable battery for the power keyboard docking station (optional) . . . .... 55Intermediary VESA Mount Plate (optional) . . . ............................................. 58Hand strap (optional) . . . . ................................................................ 60Shoulder strap (optional) ................................................................ 62Folio case (optional) . . . . . ................................................................ 64Securityfunctions ..................................................................... 66Configuring the fingerprint sensor ........................................................ 67Using the palm vein sensor (device-dependent) . . ......................................... 68UsingtheSecurityLock ................................................................. 70ConfiguringpasswordprotectioninBIOSSetupUtility ...................................... 70Protecting BIOS Setup Utility (supervisor password and user password) . . ............... 71Password protection for booting the operating system .................................. 72Passwordprotectionfortheharddisk ................................................. 73SmartCard reader (optional) . ............................................................ 74InsertingtheSmartCard ............................................................. 75Trusted Platform Module - TPM (device dependent) . . . . . . .................................. 76EnablingTPM ....................................................................... 76DisablingTPM ...................................................................... 76Connectingexternaldevices ........................................................... 77Connecting an external monitor . . ........................................................ 77MicroHDMIport .................................................................... 77HDMI port (only performance docking cradle, keyboard docking station or power keyboarddockingstation) ..................................................................... 784Fujitsu
ContentsVGA monitor port (only performance docking cradle, keyboard docking station or powerkeyboarddockingstation) ............................................................ 78Connecting USB devices . . . . . ........................................................... 79HowtoremoveUSBdevicescorrectly ................................................ 79Connecting external audio devices ....................................................... 80Connecting headphones or other audio output devices . . . . ............................. 80Connecting a microphone or other audio input devices . . . . ............................. 80Settings in BIOS Setup Utility . . . ....................................................... 81StartingtheBIOSSetupUtility ........................................................... 81BIOSSetupUtilityoperation ............................................................. 82ExitingBIOSSetupUtility ................................................................ 83Exit Saving Changes - save changes and exit BIOS Setup Utility . . ..................... 83Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . .............. 83Load Setup Defaults – load default values . ............................................ 83Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . .............. 83Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 83Savechangesandpoweroff ........................................................ 83Troubleshooting and tips .............................................................. 84Executingareset ....................................................................... 85Forcedshutdown .................................................................... 85Resetting the rechargeable battery . ................................................... 85Helpifproblemsoccur ................................................................... 85RecoveringyourFactoryImage .......................................................... 85TheTabletPC’sdateortimeisincorrect .................................................. 85Battery indicator does not illuminate . . . ................................................... 86TheTabletPC’stouchscreenremainsdark ................................................ 86The display on the Tablet PC’s touchscreen is difficult to read. . ............................. 86Theexternalmonitorremainsblank ...................................................... 87Theexternalmonitorisblankortheimageisunstable ..................................... 87The cursor does not correctly follow the stylus movements . . . . ............................. 87Stylusinputnotworking ................................................................. 88TheTabletPCdoesnotstartafterswitchon ............................................... 88TheTabletPCstopsworking ............................................................. 88The printer does not print . . . . . ........................................................... 89The wireless connection to a network does not work . . . .................................... 89Thebatterydischargestooquickly ........................................................ 89Smart Card reader is not recognized . . . ................................................... 90SmartCardPINforgotten ................................................................ 90User and/or supervisor Smart Card lost . . . . . . ............................................ 90SmartCardlost ......................................................................... 91Acousticwarning ........................................................................ 91Errormessagesonthescreen ........................................................... 91Technicaldata ......................................................................... 93TabletPC .............................................................................. 93WLAN specifications .................................................................... 94Rechargeablebattery ................................................................... 96AC adapter 65 W for the Tablet PC ....................................................... 96Performance docking cradle (optional) . ................................................... 96AC adapter 65 W for the performance docking cradle (optional) ......................... 97Keyboard docking station or power keyboard docking station (optional) . ..................... 97Rechargeable battery for power keyboard docking station (device-dependent) . . .......... 97Fujitsu 5
ContentsIntermediary VESA Mount Plate . . ........................................................ 98Hand strap (optional) . . . . ................................................................ 98Shoulder strap (optional) ................................................................ 98Folio case (optional) . . . . . ................................................................ 98Manufacturer’s notes .................................................................. 99Disposalandrecycling .................................................................. 99Recyclingyourbattery ............................................................... 99DOC (Industry CANADA) Notices ........................................................ 99ULNotice ........................................................................... 100ENERGYSTARCompliance ............................................................. 101Declarations of conformity ............................................................. 102FCC and IC RegulatoryInformation .................................................... 103RegulatoryNotesandStatements ........................................................ 103WirelessLAN,HealthandAuthorizationforuse ........................................ 103Regulatory Information/Disclaimers . . ................................................. 103Federal Communications Commission and Industry Canada statement: . . . ............... 103Déclaration d’Industrie Canada . . . . . . ................................................. 104FCCInterferenceStatement ......................................................... 104FCC Radio Frequency Exposure statement . . . ......................................... 104Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences ........... 105Exportrestrictions ................................................................... 105Restrictions concernant l’exportation . ................................................. 105Canadian Notice . ................................................................... 105Avis pour le Canada . ................................................................ 106Appendix .............................................................................. 107Before Using the Optional Wireless LAN . ................................................. 107WirelessLANDevicesCoveredbythisDocument ...................................... 107CharacteristicsoftheWLANDevice .................................................. 107Wireless LAN Modes Using this Device . . ............................................. 107Deactivating/DisconnectingtheWLANDevice ......................................... 110ConfiguringtheWirelessLAN ............................................................ 110Connection to the network . . . ........................................................ 110TroubleshootingtheWLAN ........................................................... 111Image Backup and Recovery Procedures ................................................. 112CreatingaBackupofBootableDiskandRecoveryImage .............................. 113RECOVERYOUR SYSTEMWHENTHEHARDDRIVEISSTILLACCESSIBLE ............. 114UsingtheRecoveryandUtilityTools .................................................. 114Restore the Recovery Image from Hidden Partition . . . .................................. 116RECOVERYOUR SYSTEMWHENTHEHARDDRIVEISNOTBOOTABLE ................ 117RestoretheRecoveryImageforFullHardDrive ....................................... 117Recovering Your Recovery Image Using Recovery and Utility (for new hard drive ornon-bootableharddrive) ............................................................. 118InstallingtheSoftwareaftertheRecoveryImageisRestored ............................ 119Index .................................................................................. 1226Fujitsu
Declarations of conformityDeclarations of conformityDECLARATION OF CONFORMITYaccording to FCC Part 15Responsible Party Name: Fujitsu America, Inc.Address: 1250 E. Arques AvenueTelephone:Declares that product: Sunnyvale, CA 94085(408) 746-6000 Base Model Configuration: STYLISTIC Q736 Complies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.Fujitsu 7
Fujitsu Contact InformationFujitsu Contact InformationService and SupportYou can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• Product name• Product configuration number• Product serial number• Purchase date• Conditions under which the problem occurred• Any error messages that have occurred• Type of device connected, if anyFujitsu Shopping OnlinePlease go to "http://www.shopfujitsu.com/store/ ".Maintaining Latest ConfigurationTo ensure that you always have the most current driver updates related to your system, occasionallyaccess the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available fromthe Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilitiesand applications to determine whether you have the latest versions. If you have a Windows 7or or Windows 8/8.1 operating system, you will need to go to the Support Site to download theFSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".Limited WarrantyYour STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the servicekit that came with your Tablet PC for the Limited Warranty period and terms and conditions.8Fujitsu
Fujitsu Contact InformationNotational conventionsPay particular attention to text marked with this symbol. Failure to observethis warning will endanger your life, will damage the device or lead to lossof data. The warranty will be invalidated if the device becomes defectivethrough failure to observe these warnings.Indicates important information which is required to use the device properly.►indicates an activity that must be performedindicates a resultThis style indicates data entered using the keyboard in a program dialogue or atthe command line, e.g. your password (Name123)oracommandusedtostart a program (start.exe)This style indicates information that is displayed on the screen by a program, e.g.:Installation is complete.This style indicates• terms and texts used in a software interface, e.g.: Click on Save.• names of programs or files, e.g. Windows or setup.exe."This style" indicates• Cross-references to another section, e.g. "Safety information"• cross-references to an external source, e.g. a web address: For moreinformation, go to "http://solutions.us.fujitsu.com/"• names of CDs, DVDs and titles or designations of other materials, e.g.:"CD/DVD Drivers & Utilities" or "Safety/Regulations" manualKey indicates a key on the keyboard, e.g: F10This style indicates terms and text that are emphasized or highlighted, e.g.: Do notswitch off the deviceFujitsu 9
Ports and controlsPorts and controlsThis chapter presents the individual hardware components of your device. It gives anoverview of the indicators and connections of the device. Please familiarize yourselfwith these items before you start to work with the device.Front (device option without palm vein sensor)Depending on your selected device option, the Tablet PC may be equipped with a palmvein sensor on its right side, see “Right-hand side” subchapters on the following pages.123455479861 = Touchscreen2 = Webcam3 = Webcam LED4 = Speaker5 = Mechanical mounting for (power)keyboard docking station / performancedocking cradle6 = Power-on indicator7 = Docking port8 = Windows button9 = Ambient light sensor10 Fujitsu
Ports and controlsLeft-hand side1 2 3 97 84 561 = Security Lock device2 = DC jack (DC IN)3 = Tether eyelet for stylus tether4 = Power-on indicator5 = Battery charging indicator6 = Wireless indicator7 = Micro HDMI port8 = Storage card slot (micro SD,protected by cover)9=SIMcardslot(microSIM, protectedby cover)Right-hand side (device option without palm vein sensor)1 2 64589731 = Shortcut button2 = Decrease volume button3 = Increase volume button4 = ON/OFF button5=USBport(USB2.0)6 = USB port (USB 3.0)7 = Combined headphones andmicrophone port8 = Stylus slot9 = Eyelet for stylus cordFujitsu 11
Ports and controlsRight-hand side (device option with palm vein sensor)1562374891 = Shortcut button2 = Decrease volume button3 = Increase volume button4 = ON/OFF button5 = USB port (USB 2.0)6 = Palm vein sensor7 = Combined headphones and microphoneport (not visible in the image)8 = Stylus slot9 = Eyelet for stylus cord12 Fujitsu
Ports and controlsRear (2 options: without screw holes or with screw holes and Smart Card reader)43216432155555771 = Fingerprint sensor2 = Camera light3 = Webcam4 = Webcam LED5 = Screw holes (device-dependent) forsecuring accessories6 = SmartCard reader (device dependent)7 = NFC (Near Field Communication)(device-dependent)Fujitsu 13
Important notesImportant notesImportantnotesNotesThis chapter contains essential safety information which must be followed when workingwith your Tablet PC. The other notes provide useful information about your Tablet PC.Safety instructionsSafetyinformationInform ation,Please follow the safety notes provided in the "Safety/Regulations" manualas well as the safety notes given below.Please pay special attention to the sections in the manual markedwith the symbol on the left.When connecting and disconnecting cables, observe the relevantnotes in this operating manual.Read the information on the ambient conditions in the "Technical data", Page 93 chapterand the information in the "First-time setup of your device", Page 18 chapter beforepreparing your Tablet PC for use and switching it on for the first time.When cleaning the device, please observe the relevant notes in thesection "Cleaning the Tablet PC", Page 17.Pay attention to the additional safety notes for devices with wireless componentsprovided in the "Safety/Regulations" manual.When handling this device, you come into contact with lead, a chemical which inCalifornia is held to be a possible cause of birth defects and other damage to fertility.Wash your hands after using the device.This Tablet PC complies with the relevant safety regulations for data processing equipment. Ifyou have questions as to whether you can set up the Tablet PC in the intended environment,please contact your sales outlet or our hotline/service desk.14 Fujitsu
Important notesAdditional safety notes for devices withwireless componentsWirelesscom ponentsWirelessLANBluetooth,SafetynotesIf a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you mustbe sure to observe the following safety precautions when using your Tablet PC:• Switch off the wireless components when you are in an aircraft or driving in a car.• Switch off the wireless components when you are in a hospital, an operatingroom or near a medical electronics system. The transmitted radio wavescan impair the operation of medical devices.• Switch off the wireless components, when you let the device get near flammablegases or into hazardous environments (e.g. gas station, paint stores), as thetransmitted radio waves can cause an explosion or a fire.For further information on how to switch the wireless components on and off, referto section "Switching the wireless components on and off", Page 43.Protecting the display screenDo not pour liquids on the system or wash it with a heavily soaked cloth. Do not placeitemsonthetopof the monitor in order to prevent it from being damaged.During normal use of the device, small particles from the environmentcan become embedded in the stylus tip and scratch the screen. Thewarranty does not cover a scratched screen.Energy savingNotesEnergyPowersavingIf you will not be using your Tablet PC, switch it off. Switch off any connected external devices whenthey are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you dothis, you will be able to work longer with the Tablet PC before having to recharge the battery.The energy efficiency is increased and environmental pollution is reduced.You save money and help protect the environment.Energy saving under Windows►Make use of the available energy-saving functions as described in chapter"Using the energy saving functions", Page 39.Fujitsu 15
Important notesTraveling with your Tablet PCMobileoperationNotesTrans portati onTabletPCPlease follow the instructions below when traveling with your Tablet PC.Before you travel►Back up important data stored on your hard disk.beforeyou travelTravel►Switch off the wireless component for data security reasons. With data traffic via a wirelessconnection, it is also possible for unauthorized third parties to receive data.Information on activating data encryption is provided in the documentationfor your wireless component.►If you want to use your Tablet PC during a flight, ask the flight attendants to seeit is safe to use it.When traveling in other countries►If you are traveling abroad, check that the AC adapter can be operated with thelocal AC voltage. If this is not the case, obtain the appropriate AC adapter foryour Tablet PC. Do not use any other voltage converter!►Check whether the local AC voltage and the AC cable are compatible. If this is notthe case, buy an AC cable that suits the local conditions.►Enquire with the appropriate government office of the country you will be traveling in as towhether you may there operate the wireless component integrated in your Tablet PC.►Take the necessary travel adapters with you when traveling abroad. Check in the followingtable for which travel adapters you will need, or ask your travel organizer.Power connection Travel destinationUnited States, Canada, Mexico, parts of LatinAmerica, Japan, Korea, Philippines, TaiwanRussia and the Commonwealth of IndependentStates (CIS), much of Europe, parts of LatinAmerica, the Middle East, parts of Africa, HongKong, India, much of south-east AsiaUnited Kingdom, Ireland, Malaya, Singapore,parts of AfricaChina, Australia, New Zealand16 Fujitsu
Important notesTransporting the Tablet PCProtect the Tablet PC from severe shocks and extreme temperatures(e.g. direct sunlight in a car).• Do not transport your Tablet PC while it is turned on.• Carry your Tablet PC with you while traveling. Do not check it in as baggage.• Never put your Tablet PC through a metal detector. Have it hand-inspected bysecurity personnel. You can however put your Tablet PC through a properlytuned X-ray machine. To avoid problems, place it close to the entrance ofthe machine and remove it as soon as possible or have it hand-inspected bysecurity personnel. Security officials may require you to turn your Tablet PCon. So make sure you have a charged battery on hand for this.►Switch the Tablet PC off.►Unplug the AC plug of the AC adapter and all external devices from the power outlets.►Disconnect the AC adapter cable and the data cables for all external devices.►To protect against damaging jolts and bumps, use a suitable Tablet PCcarrying case to transport your Tablet PC.Cleaning the Tablet PCDo not clean any interior parts yourself; leave this job to a service technician.Only use detergents designed for computers. Normal household cleanersand polishes can damage the labels on the keyboard and the TabletPC, the paintwork or the Tablet PC itself.Ensure that no liquid enters the Tablet PC.The touchscreen is very sensitive to scratches! Only clean the displaysurface with a very soft, slightly damp cloth.►Switch the Tablet PC off.CleaningInstructionsTab l e t P CKeyboardTouchpadTouchscreenCrystalView screen►To prevent the device from being switched on unintentionally, remove the ACplug of the AC adapter from the power outlet.The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which hasbeen moistened in mild domestic detergent and then carefully wrung out.Fujitsu 17
First-time setup of your deviceFirst-time setup of your deviceFirst- timese tupGettingstartedPlease read the chapter "Important notes", Page 14.If your device is equipped with a Windows operating system, the necessaryhardware drivers and supplied software are already pre-installed.Beforeswitchingitonforthefirst time, connect the device to the AC voltage usingthe AC adapter, see "Connecting the AC adapter", Page 20. The AC adapter mustremain connected during the whole of the installation process.A system test is performed when your device is first switched on. Various messagescan appear. The display may remain dark for a short time or may flicker.Please follow the instructions on the screen.NEVER switch off your device during the first-time setup process.The battery must be charged if you want to operate your device using the battery.When used on the move, the built-in battery provides the device with the necessary power. Youcan increase the operating time by using the available energy-saving functions.For instructions on how to connect external devices (e.g. mouse, printer) to your TabletPC, please refer to the operating manual for your device.Unpacking and checking the deviceIf you find that damage has occurred during transport, please notifyyour local sales outlet immediately!►Unpack all the individual parts.PackagingTransport►Check your device for any visible damage which may have occurred during transportation.You may need to reuse the packaging in the future, for example ifyou need to ship your device.18 Fujitsu
First-time setup of your deviceChoosealocationChoosealoc ationSetupAC adapterChoose a suitable location for the device before setting it up. In doingso, please follow these instructions:• Never place the device or the AC adapter on a heat-sensitive surface.The surface could be damaged as a result.• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,bed). This can result in damage caused by overheating.• The back of the device heats up during normal operation. Prolonged contactwith skin can become unpleasant or even result in burns.• Place the device on a stable, flat, non-slippery surface. Please note that therubber feet of the device may mark certain types of delicate surfaces.• Keep other objects at least 100 mm / 4 inches away from the deviceand its AC adapter to ensure adequate ventilation.• Do not expose the device to extreme environmental conditions. Protectthe device against dust, humidity and heat.Mounting rubber feet (only for device optionswith palm vein sensor)Prior to using the device options mentioned above for the first time Fujitsurecommends the installation of the provided rubber feet.►Install the rubber feet, see section "Using the palm vein sensor (device-dependent)", Page 68.Fujitsu 19
First-time setup of your deviceConnecting the AC adapterMakingreadytouseACadapterObserve the safety notes in the enclosed "Safety/Regulations" manual.The supplied AC cable conforms to the requirements of the country in whichyou purchased your device. Make sure that the AC cable is approved foruse in the country in which you intend to use it.312►Connect the AC cable (1) to the AC adapter.►Plug the AC cable (2) into a power outlet.►Connect the AC adapter cable (3) to theDC jack (DC IN) of the device.20 Fujitsu
First-time setup of your deviceSwitching on the device for the first timeSwitchingonforthefirstt imeTo make it easier to use your device for the first time, the operating systemis pre-installed on the hard disk.212►Press the ON/OFF button (1) for about one second to switch the device on.The power-on indicators (2) light up whenever the system is switched on.Fujitsu 21
First-time setup of your device►During the installation process, follow the on-screen instructions.You can find information and help on the Windows operating systemfunctions online at "http://windows.microsoft.com".If a Windows 8.1 operating system is installed on your Tablet PC, a tutorialis automatically started when a new user logs on for the firsttimetoshowyou how to use the new functions of Windows 8.1.Installing Bonus AppsBonusAppsAfter you have started your system the first time, you will see a Bonus Apps icon on your desktop.►Click on the icon to see which additional applications are available for you to install.Applications that are already installed appear in grey, those that areavailable for installation appear in blue.►Select the applications you wish to install by selecting the checkbox adjacent to your selection.or►Click Select All if you would like to install all available applications.►To confirm your selection, click Install.Note that in some cases (depending upon which application was selected forinstallation) after installation completes, the system will prompt you to reboot.There are also cases in which if multiple applications are selected to installbut one of them needs a reboot, the system will reboot and continueinstalling the rest of the selected applications.22 Fujitsu
Working with the Tablet PCWorking with the Tablet PCTablet,operationTabletThis chapter describes the basics for operating your Tablet PC. You can find instructionson how to connect external devices (e.g. mouse, flash storage) to the Tablet PC inthe chapter "Connecting external devices", Page 77.Please refer to the notes in the chapter "Important notes", Page 14.Status indicatorsStatusindicatorsSymbolsThe status indicators (1, 2, 3) provide information about the status of the powersupply, the drives and the keyboard functions, etc.2113Fujitsu 23
Working with the Tablet PCNo. Status indicator Description1Power-on indicator• The indicator lights up white: The Tablet PC isswitched on.• The indicator flashes: The Tablet PC is in sleep mode(Save-to-RAM).• The indicator is not lit: The Tablet PC is switched offor in Save-to-Disk mode.2Battery charging indicator• The indicator light is orange: The battery is beingcharged.• The indicator is not illuminated: The battery is notbeing charged (the battery is already fully charged orthe AC adapter is not connected).3Wireless indicator• The indicator lights up white: The wireless componentsare switched on, while the Tablet PC is operating.• The indicator is flashing: The wireless componentsare switched on while the Tablet PC is in sleep mode,Save-to-Disk mode or switched off.• The indicator is not illuminated: The wirelesscomponents are switched off.24 Fujitsu
Working with the Tablet PCSwitching the Tablet PC onTablet:SwitchingonPower-onPower-onindicatorSuspend/Resume button212►Press the ON/OFF button (1) for about one second to switch the device on.The power-on indicators (2) light up whenever the system is switched on.Fujitsu 25
Working with the Tablet PCPrograming the ON/OFF buttonYou can program the ON/OFF button:Operating system MenuWindows 7 Start - (Settings) - Control Panel - System andSecurity - Power OptionsWindows 8.1 Windows 8.1 Desktop - Control Panel - Hardwareand Sound - Power OptionsIf you have assigned a password, you must enter this when requested todo so in order to start the operating system. Detailed information can befound in the chapter "Security functions", Page 66.Switching the Tablet PC offBack up your data and close all applications before you switch off yourdevice. Otherwise data might be lost.►Shut down the operating system correctly.Switchingoffthe►If the Tablet PC does not switch itself off automatically, press the ON/OFFbutton for approx. five seconds.Handwriting recognitionFor detailed information on handwriting recognition, see the documentation for your operating system.At present, handwriting recognition under Windows 7 or Window 8.1 supports the following languages:English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.Under Windows 8.1 you can set the required language under ControlPanel–Time, Language and Region – Language.26 Fujitsu
Working with the Tablet PCTouchscreenTou ch s c re e nNotesHigh-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons,these screens are manufactured for a specific resolution. An optimal, clear picture canonly be ensured in the resolution intended for the particular screen. A screen resolutionwhich differs from the specification can result in an unclear picture.The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.Current production technology cannot guarantee an absolutely fault-free screen display. A fewisolated constantly lit or unlit pixels (picture elements) may be present. The maximum permittednumber of such faulty pixels is specified in the international standard ISO 9241-307 (Class 2).Example:A monitor with a resolution of 1,280 x 800 has 1,280 x 800 = 1,024,000 pixels. Each pixel consists ofthree subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO9241-307 (class 2), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixelsor an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.Pixel A pixel consists of 3 subpixels, normally red, green andblue. A pixel is the smallest element that can be generatedby complete functionality of the display.Subpixel A subpixel is a separately addressable internal structurewithin a pixel that enhances the pixel function.Cluster A cluster contains two or more defective pixels orsubpixels in a 5 x 5 pixel block.Background lightingLCD screens are operated with background lighting. The luminosity of the backgroundlighting can decrease over the period of use of the Tablet PC. However, you canadjust the brightness of your monitor yourself.Ambient light sensorIf your Tablet PC was shipped with the Windows operating system,the screen brightnessis regulated by the ambient light sensor and is dependent on the particular light conditions.This results in optimum readability and longer battery life at the same time.If your Tablet PC was shipped with Windows 8.1, the adaptive brightness setting is deactivated. Tochange the ambient light sensor settings, select Control Panel - System and Security - Power Options -Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..Select On to activate the adaptive brightness setting with the help of the ambient light sensor.Synchronizing the display on the touchscreen and an external monitorIn Windows 7, you can switch between touchscreen and external monitor, if you openControl Panel - Windows Mobility Center, section External Display.In Windows 8.1 wipe your finger over the screen from the right-hand edge. The settingCharms - Devices - Second monitor opens. Select the desired output type.You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type.Fujitsu 27
Working with the Tablet PCSelect display orientation (portrait orlandscape format)Landscapeform atPortraitformatDisplayorientationYou can choose to use either portrait or landscape format for the display.Windows 7You can change these settings in the Fujitsu menu or under Start -(Settings -)Control Panel -Hardware and Sound -Display -Settings.Windows 8.1You can change these settings under Windows 8.1 Desktop - Control Panel -Hardware and Sound - Windows Mobility Center / Rotate screen.In the Fujitsu Tablet Controls settings, profiles are saved for operationwith different screen orientations. These profiles have preset standardconfigurations that can be modified as desired.These settings do not just affect the monitor settings on the Tablet PC,but also on external monitors that are connected.Using fingersYou can execute certain commands by using your finger tip on the touchscreen of your device.Alternatively, everything which you can select or activate using your fingertip can also be selected or activated using the stylus.Calibrate the Dual Digitizer for finger-basedoperation of the device.You must calibrate your Tablet PC with your fingers before first use, so thatit recognizes your fingertips as accurately as possible.As soon as you notice that the accuracy is becoming worse, youmust recalibrate the device.Please note: There are separate calibration programs available for calibratingthe stylus and for calibrating finger-based operation. Do not use the calibrationtool for the pen to calibrate finger-based operation.Operating system MenuWindows 7 /Windows 8.1 DesktopTo calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.28 Fujitsu
Working with the Tablet PCActions with one finger (Windows 8.1 Modern)Action DescriptionWipe your finger over the screen from theright-hand edge.►Open Charms with system commands(equivalent to pressing the Windows key +Ckey on a keyboard).►Working with the mouse: Position the mousepointer at the bottom right-hand edge of thescreen.Wipe your finger over the screen from theleft-hand edge.►Switch between the most recently usedapplications (equivalent to pressing theWindows key + Ctrl +Spaceonakeyboard).►Working with the mouse: Position the mousepointer at the bottom left-hand edge of thescreen.Wipe your finger over the screen from the topor bottom edge.►Open the App commands (equivalent topressing the Windows key + Zkey on akeyboard). Wipe from the top to the bottom ofthe screen to dock or close the current App.►Working with the mouse: Right-click on theApptodisplay the App commands.Fujitsu 29
Working with the Tablet PCAction DescriptionPress and hold ►Keep your finger pressed on an object on thescreen to display a menu with further options.►Workingwiththemouse:Movethemousepointer over the object to display a menu withfurther options.Taponanobject ►Tap your finger on an object on the screento open an App or a link or to execute acommand.►Working with the mouse: Left-click on theobject.Scroll / Move object / Swivel object ►Use this function to scroll through lists orwebsites or to swivel or move an object.►Working with the mouse: Left-click on theobject, keep the mouse button pressed andmove / swivel the object or scroll.30 Fujitsu
Working with the Tablet PCActions with one finger (Windows 7 / Windows 8.1 Desktop)Action DescriptionSelecting objects (click with the left mousebutton)►Tap once briefly with the finger on the object.Starting programs (double-click with the leftmouse button)►Use one finger to tap twice in quicksuccession on the program symbol.Moving objects/windows (while holding the leftmouse button pressed, drag & drop)►Place your finger on the object/window,keep your fingertip pressed againstthe touchscreen and move the desiredobject/window.Opening a context menu (click with the rightmouse button)►Tap your finger on the desired item.Keep your fingertip pressed against thetouchscreen.The context menu appears.Moving the cursor ►Position one finger on the touchscreen andmove your finger in the desired direction.Fujitsu 31
Working with the Tablet PCActions with two fingers (Windows 7 / Windows 8.1 Desktop)Action DescriptionScrolling►Place two fingers on the touchscreen.►Move the fingers up to scroll up.or►Move the fingers down to scroll down.Rotating►Position your thumb on the touchscreenand rotate the image clockwise orcounter-clockwise using your index finger.32 Fujitsu
Working with the Tablet PCAction DescriptionIncrease or decrease view►Put two fingers on the touch screen andmove them apart to increase the size of theview.or►Put two fingers on the touch screen andmove them together to decrease the sizeof the view.Lock context-sensitive menus ►Use two fingers to tap twice in quicksuccession on the touchscreen.Fujitsu 33
Working with the Tablet PCUsing the stylusPen1231 = stylus tip2 = stylus button (right mouse button)3 = eyelet for optional stylus tetherYou can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and tonavigate through the programs. Programs that support handwriting recognition also allow you towrite directly on the screen with the stylus. You can also use the stylus as a drawing tool.You can secure the optional stylus tether to the eyelet of the stylus and to the eyelet of the Tablet PC.Use only the stylus that was provided with your Tablet PC. Do not use any other pointedobject as a substitute, that was not specially designed for your Tablet PC. Replacethe stylus tip if it is worn. The warranty does not cover a scratched screen.While writing, take care that you do not scratch the surface of thedisplay (e.g. with a wristwatch or bracelet).The stylus of the Tablet PC is an electronic instrument that can be damagedif used improperly. Handle the stylus with care.Our recommendations for proper handling of the stylus are as follows:• Do not gesture with the stylus.• Do not use the stylus as a pointer.• Do not use the stylus on surfaces other than the screen of the Tablet PC.• Do not try to turn the grip of the stylus. The grip is used to put thestylus into its slot or to take it out of its slot.• Never store the stylus with its weight on the tip (e.g. with the tip down in a styluscontainer). If the stylus is stored with the tip pointing down, this may have anadverse effect on the stylus mechanism (particularly in high temperatures). In thiscase, the stylus tip may react as though it is constantly being pressed down. Toavoid damage, the stylus should be stored in the slot when not in use.The stylus can be influenced by electromagnetic fields (cursor quivers orjumps). There may be a few areas on the screen where the cursor quiversslightly in spite of pressing the stylus down firmly.The screen responds to entries made with the tip of the finger or the stylus when thetip of the finger or the stylus directly touches the screen.You can use the stylus to perform almost all functions for which you would otherwise use a mouse.Delete functions are not supported by the stylus.34 Fujitsu
Working with the Tablet PCAction Mouse StylusSelecting menuitemsClick with the left mouse button.Tap on the menu entry with the tip ofthe stylus.Starting programs Double-click with the left mousebutton.Tap on the program symbol twice inrapid succession using the stylus tip.Moving an objector windowDrag with the left mouse buttonpressed.Place the stylus tip directly on theobject or window. Keep the stylus tipheld against the screen. Drag thedesired object or window.Opening a contextmenuClick with the right mouse button. Tap on the desired element with thestylus and keep the stylus pressedagainst the screen.Moving the cursor Move the mouse Place the tip of the stylus directly onthe screen.Stylus locationTo prevent the stylus from jamming in its slot, always make sure that you insert the styluscorrectly into its slot (flat part of the stylus points towards the bottom of the Tablet PC).On delivery, the stylus is located in the stylusslot (1):1Adjusting the stylusOperating system MenuWindows 7 Under Hardware and Sound - Pen and Input Devices, you can make varioussettings for the stylus in the control panel (assignment and function ofthe stylus button).Windows 8.1 Under Windows 8.1 Desktop - Control Panel - Hardware and Sound - Pen andInput Devices you can make various settings for the stylus (assignmentand function of the stylus button).Fujitsu 35
Working with the Tablet PCCalibrating the stylusYou must calibrate your Tablet PC with the stylus before first use, so that itrecognizes the stylus as accurately as possible.You should also always repeat the calibration if the coordination between thestylus and the cursor movement deteriorates.Operating system MenuWindows 7 /Windows 8.1 DesktopTo calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.Securing the stylus tether (optional)To prevent accidentally dropping or losing the stylus, you should secure itwith the optional stylus tether.►Secure one end of the stylus tether to the stylus and the other end to the Tablet PC.36 Fujitsu
Working with the Tablet PCTablet buttonsIn addition to an on/off switch (4), your Tablet PC is fitted with three tablet buttons.1 2 43No. Description Functions1Shortcut button Start function manager or screen shot function2 Decrease volume button Decrease volume3 Increase volume button Increase volumeIf the Windows key of the Tablet PC is pressed in combination with the ON/OFF switch (4),the function corresponds with the key combination Ctrl +Alt +Del on a keyboard.WebcamWebcamYour device has two webcams: one on the front of the device and one on the rear.The webcam has its own status indicator. The indicator lights up when the webcam is active.Depending on the software used, you can use your webcam to take pictures,record video clips or take part in web chats.• The picture quality depends on the lighting conditions and the software being used.• You can only operate the webcam with a particular application (e.g. an Internet telephonyprogram or a video conferencing program which supports a webcam).• When using the webcam the support of the Tablet PC must not wobble.• The webcam automatically adjusts itself to the current light level. For this reason,the touchscreen may flicker while the light level is adjusted.Further information on use of the webcam and additional settings for your webcamcan be found in the help function of the program using the webcam.Fujitsu 37
Working with the Tablet PCRechargeable batteryBatteryBatteryServicelife,batteryRechargeablebatteryBatteryThe built-in battery provides the Tablet PC with the necessary power for use on the move.You can increase the service life of the battery by caring for the battery properly. Theaverage battery service life is around 500 charge/discharge cycles.You can extend the battery service life by taking advantage of the available energy-saving functions.Charging and maintaining the batteryBatteryBatteryThe Tablet PC battery can only be charged when the ambient temperature isbetween 5°C / 41 °F and max. 35°C / 95°F.You can charge the battery by connecting the Tablet PC to the AC adapter(see "Connecting the AC adapter", Page 20).If the battery is running low you will hear a warning alarm. If you do not connect the AC adapterwithin five minutes of hearing the warning alarm, your Tablet PC will switch off automatically.Monitoring the battery state of chargeBatterybatterychargemeterA battery symbol for monitoring the battery capacity is displayed in the system bar /status indicator. The battery symbol shows you the battery charge.38 Fujitsu
Working with the Tablet PCUsing the energy saving functionsEnergyEnergyBatteryThe Tablet PC uses less power when the energy saving features are enabled. You will thenbe able to work longer when using the battery before having to recharge it.The energy efficiency is increased and environmental pollution is reduced.By choosing the best power options, you can make significant savings andat the same time help protect the environment.We recommend the following settings:Function Operating on AC power Operating on battery powerTurn off monitor After 10 minutes After 5 minutesTurn off hard disk(s) After 15 minutes After 10 minutesEnergy saving (S3) After 20 minutes After 15 minutesHibernate mode (S4)After 1 hour After 30 minutes►Set the energy saving functions in your Control Panel.►Set the screen saver in your Control Panel.or►Keep a finger pressed on the desktop to display the context menu. Configure the screensaver under Change screen saver.If you need further information about an option, you can get help with most settings bypressing the ?symbol in the upper right of the screen to open the Microsoft Help.When the Tablet PC is in a power-saving mode, you must remember the following:During power-saving mode, open data is held in main memory orin a swap file on the hard disk.Never switch off the Tablet PC while it is in a power-saving mode. If the built-in batteryis nearly flat, close all open files and do not go into power-saving mode.If you do not intend to use your Tablet PC for a long period of time:►Exit the power-saving mode if necessary by touching the screen or by switching the TabletPC on.►Close all opened programs and completely shut down the Tablet PC.Fujitsu 39
Working with the Tablet PCMemory cardsSlotYour Tablet PC is equipped with an integrated storage card reader. Use storagecards to enlarge the storage of your Tablet PC.Follow the manufacturer’s instructions when handling the memory cards.MemorycardSupported formatsThe following formats are supported:• Micro Secure Digital (Micro SDTM Card)• Micro SDHC•MicroSDXCInserting the memory card21►Open the slot cover (1).►Carefully slide the storage card into the slot (2). The label area must be facing upward. Donot apply any force, otherwise the delicate contact surfaces could be damaged.Memorycard►Close the slot cover.40 Fujitsu
Working with the Tablet PCRemoving the memory cardMemorycardTo avoid any loss of data, always follow the correct procedure for removing thecard (see the documentation for your operating system).►Open the slot cover.13a12►Press the edge of the memory card so that the memory card jumps (1) slightly out of the slot (a).►Pull the memory card out of the slot (a) in the direction of the arrow (2).►Close the slot cover (3).Fujitsu 41
Working with the Tablet PCSIM cardA SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or TabletPC and, together with an integrated 4G module, enables access to a cellular radio network.Follow the instructions supplied by the provider of the SIM card. If you do not feel thethe SIM card engage as you insert it, use a pointed object to insert the SIM card.Please note that the SIM card format must be micro-SIM (3FF). Other SIMcard formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) donot fit in the SIM card slot of your Tablet PC.Please do not insert any other format of SIM card as they may becometwisted, they could even damage the system.Inserting a SIM card21a►Open the slot cover (1).►Carefully push the SIM card into the slot (a) in the direction of the arrow (2) until youfeel the SIM card engage. The label area must be facing upward. Do not apply anyforce, otherwise the delicate contact surfaces could be damaged.►Close the slot cover.42 Fujitsu
Working with the Tablet PCRemoving a SIM card►Open the slot cover.3a21►Press the edge of the SIM card so that the SIM card jumps slightly out of the slot (1).►Pull the SIM card out of the slot (a) in the direction of the arrow (2).►Close the slot cover (3).Wireless LAN/Bluetooth/4G/LTE/NFC wirelesscomponentsThe installation of wireless components not approved by Fujitsu willinvalidate the certifications issued for this device.Switching the wireless components on and offThe wireless components are switched on and off using the appropriatefunctions of the operating system.►To switch wireless components on and off individually, select Settings – ChangePC settings – Network – Airplane mode.Configuring WLAN access• Requirement: A WLAN is available and you have the necessary access data to hand.Information on configuring WLAN access can be found in thedocumentation for your operating system.Fujitsu 43
Working with the Tablet PCFurther information on WLAN and BluetoothFor further information about WLAN or Bluetooth, please refer to theappendix of this Operating Manual.For WLAN specifications, see chapter "WLAN specifications", Page 94.Access via UMTSIf you ordered an integrated UMTS module with your system, you can enjoy optimumreception and maximum energy efficiency without awkward cables or antennas. Theoptional UMTS module is ready for use immediately.You will find information on establishing the connection with the UMTS networkin the documentation for the hardware used.Your device can connect to the Internet via UMTS. To do this, use one ofthe following types of connection:• Integrated UMTS module (availability dependent on your configuration)• USB dongle (a USB stick containing a SIM card from your cellular phone network provider)• A mobile end-device (e.g. cellular phone with Bluetooth or cable connection)Access via Wireless WANYou can purchase the accessories for Wireless WAN reception from your Fujitsu dealer.If you have ordered a Wireless WAN module, your device will alreadybe prepared when you receive it.You will find information on establishing the connection with the Wireless WANnetwork in the documentation for the hardware you plan to use.Access via 4GYou can order the accessories for 4G reception from your Fujitsu dealer.If you have ordered an integrated 4G module with your system, the 4Gmodule is ready for use straight away.You can find information on establishing the connection with the 4G networkin the documentation for the hardware used.NFC (Near Field Communication, optional)Your Tablet PC can be equipped with an optional built-in NFC chip. Near Field Communication isused for contactless exchange of data via radio over short distances (a few centimeters).44 Fujitsu
Working with the Tablet PCEthernet and LAN (only with performancedocking cradle, keyboard docking station orpower keyboard docking station)EthernetLANThe internal network module of your Tablet PC supports Ethernet LAN. You can use it toestablish a connection to a local network (LAN = Local Area Network).21►Connect the network cable to the LAN portof the performance docking cradle (1).or►Connect the network cable to the LANport of the keyboard docking station orpower keyboard docking station (1).►Connect the network cable to yournetwork connection (2).Your network administrator can help you to configure and use the LAN connections.The network cable is not included in the delivery scope. This type ofcable can be obtained from a specialist dealer.GPSGPSWhether your device has this function depends on the chosen equipment level.Fujitsu 45
Accessories for your Tablet PC (optional)Accessories for your Tablet PC (optional)The following accessories are available for your Tablet PC:• Performance docking cradle for charging the Tablet PC and with additional ports• Keyboard docking station with additional ports (without replaceable battery)• Power keyboard docking station with additional ports (with replaceable battery)• Intermediary VESA Mount Plate• Hand strap• Shoulder strap• Folio caseThe following sections provide more information on handling the accessories.46 Fujitsu
Accessories for your Tablet PC (optional)Your performance docking cradle (optional)As well as fast charging, your performance docking cradle is a device that also allows you toquickly connect your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc.You only need to dock the Tablet PC to be able to work with your peripheral devices.Performance docking cradle componentsPortsPortsPerformancedockingcradle1234561278910111 = Slide-out button2 = Connector on the performance dockingcradle for the docking port of the Tablet PC3=USBport3.04=USBport3.05=USBport3.06 = Microphone port7 = Headphones port8 = VGA monitor port9=HDMIport10 = LAN port11 = Security Lock device12 = DC jack socket (DC IN)Setting up the performance docking cradleSelect a suitable location for the performance docking cradle before settingit up. In doing so, please follow these instructions:• Place the performance docking cradle on a flat, stable, non-slippery surface.• Never place the performance docking cradle or the AC adapter on a heat-sensitive surface.• Do not expose the performance docking cradle to extreme environmental conditions.• Protect the performance docking cradle from dust, moisture and heat.Fujitsu 47
Accessories for your Tablet PC (optional)Connecting the Tablet PC to the performance docking cradleIt is possible to connect the Tablet PC to the performance docking cradle while it is running.Disconnect the AC adapter from the Tablet PC before connecting theTablet PC to the performance docking cradle.When the Tablet PC is connected to the performance docking cradle, you mustconnect the AC adapter to the performance docking cradle.Performancedockingcradle►Remove the AC plug of the AC adapter from the power outlet.►Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.1243Your performance docking cradle is supplied with a separate AC adapter (19 V, 3.42 A).Make sure that you only use this AC adapter for the performance docking cradle.►Position the Tablet PC so that it lies against the storage surface of the performance docking cradle.48 Fujitsu
Accessories for your Tablet PC (optional)►Push the Tablet PC onto the performance docking cradle in the direction of the arrow (1) untilyou feel it engage on the connector and until the slide-out position returns to its original position.►Plug the AC adapter cable into the DC jack (DC IN) on the performance docking cradle (2).►Connect the AC cable to the AC adapter (3).►Plug the AC cable into the power outlet (4).Disconnecting the Tablet PC from the performancedocking cradleIt is possible to separate the Tablet PC from the performance dockingcradle while it is running.21►Press the slide-out button in the direction of the arrow (1) until it firmlyremains in pressed position (red marking visible).►While holding down the lower part of the performance docking cradle, lift the Tablet PCoff the performance docking cradle in the direction of the arrow (2).Fujitsu 49
Accessories for your Tablet PC (optional)Keyboard docking station or power keyboarddocking station (optional)The keyboard docking station is available in two options:• normal keyboard docking station without replaceable battery• power keyboard docking station with replaceable batteryThe (power) keyboard docking station is a device which has been optimized for convenient input oftexts and allows external devices to be connected. It only needs to be docked with the Tablet PC.50 Fujitsu
Accessories for your Tablet PC (optional)Ports on the keyboard docking station or powerkeyboard docking stationKeyboarddo ckingstationPorts71561012 1113892341=Releasebutton2 = Num Lock indicator (switch virtualkeypad on and off)3 = Caps Lock indicator (switch upper casewriting function on and off)4 = Scroll indicator (Scroll Lock, functiondepends on application program)5 = Battery indicator of the battery in thepower keyboard docking station (optional)6 = Battery charging indicator of thebattery in the power keyboard dockingstation (optional)7 = Docking port for the Tablet PC8 = DC jack (DC IN)9=Security Lock device10 = LAN port11 = HDMI port12 = VGA monitor port13 = USB ports (3 x USB 3.0)Fujitsu 51
Accessories for your Tablet PC (optional)Status indicators for the power keyboard docking stationwith additional replaceable batteryThis section does not apply to the normal keyboard docking stationwithout replaceable battery!Status indicator DescriptionBattery indicator The battery indicator shows the state of charge of the battery.• The indicator lights up white: The battery is between 50% and100% charged.• The indicator lights up orange: The battery is between 13 %and 49 % charged.• The indicator lights up red: The battery is charged between 0% and 12 %.Battery charging indicator The battery charging indicator shows whether the battery is beingcharged.• The indicator lights up orange: The AC adapter has beenconnected; the battery is charging.• The indicator lights up white: The AC adapter is connected andthe battery is fully charged / is not being charged.• The indicator is not lit up: The AC adapter is not connected.52 Fujitsu
Accessories for your Tablet PC (optional)Connecting the Tablet PC to the keyboard docking stationor power keyboard docking stationIf the Tablet PC is connected to the keyboard docking station or powerkeyboard docking station, you can connect the AC adapter either to thekeyboard docking station or to the Tablet PC.Keyboarddo ckingstation►Position the keyboard docking station as shown.1234►Push the Tablet PC onto the keyboard docking station in the direction of thearrow (1) until you notice it engage with the plug.►Connect the AC adapter cable to the DC input connector (DC IN) ofthe keyboard docking station (2).►Connect the AC cable to the AC adapter (3).►Plug the AC cable into the power outlet (4).Fujitsu 53
Accessories for your Tablet PC (optional)Separating the Tablet PC from the keyboard dockingstation or power keyboard docking stationIt is possible to separate the Tablet PC from the keyboard docking stationor power keyboard docking station while it is running. However, to preventany problems, we recommend that you execute the appropriate undockingfunction provided by the operating system.21►Keep the unlocking button pressed (1) until it remains in the pressedposition (red marking becomes visible).►Lift the Tablet PC away from the keyboard docking station in the direction of the arrow (2).54 Fujitsu
Accessories for your Tablet PC (optional)Removable rechargeable battery for the power keyboarddocking station (optional)BatteryBatteryServicelife,batteryRechargeablebatteryBatteryThis section does not apply to the normal keyboard docking stationwithout replaceable battery!Removing and installing the batteryOnly use rechargeable batteries approved by Fujitsu for your Tablet PC.Never use force when fitting or removing a battery.Make sure that no foreign bodies get into the battery connections.Never store a battery for long periods in the discharged state. Thiscan make it impossible to recharge.Removing the rechargeable batteryPlease observe the safety information in chapter "Important notes", Page 14.Remove the AC plug from the power outlet!►Switch the TabletPCoff.The device must not be in energy saving mode.►Disconnect all cables from the keyboard docking station.►Turn the keyboard docking station over and place it on a stable, flat and cleansurface. If necessary, lay an anti-slip cloth on this surface to prevent thekeyboard docking station from being scratched.Fujitsu 55
Accessories for your Tablet PC (optional)112►Disconnect the catches of the battery compartment cover and open thebattery compartment cover (1).►Lift the battery at the deep point in the middle of the battery compartment andtake the battery out of the battery compartment (2).56 Fujitsu
Accessories for your Tablet PC (optional)Installing a rechargeable battery13322►Position the rechargeable battery on the edge of the battery compartment and insertthe rechargeable battery into the battery compartment (1).►Insert the catches of the battery compartment cover in the openings on the device (2).►Close the battery compartment cover (3).Fujitsu 57
Accessories for your Tablet PC (optional)Intermediary VESA Mount Plate (optional)On models with screw holes, Smart Card reader option or palm vein sensor option, anoptional Intermediary VESA Mount Plate can be attached.Use the Intermediary VESA Mount Plate to secure the Tablet PC to a monitorwith the corresponding screw holes, for example.The Intermediary VESA Mount Plate cannot be used in conjunctionwith the hand strap or shoulder strap.The Intermediary VESA Mount Plate Kit includes the following components:Intermediary VESA Mount Plate, two M2x8 screws and two spacers.58 Fujitsu
Accessories for your Tablet PC (optional)• Use the appropriate tool of the correct size when securing the screws.• Keep the screws out of the reach of children.4444311112222►Remove the covers from the screw holes on the rear of the tablet PC (1).►Position the spacers between the tablet PC and the Intermediary VESA Mount Plate (2).Fujitsu 59
Accessories for your Tablet PC (optional)►Position the Intermediary VESA Mount Plate on the tablet PC (3). Make sure that the screw holesof the Intermediary VESA Mount Plate and of the tablet PC line up exactly above one another.►Secure the Intermediary VESA Mount Plate with the screws (4).Hand strap (optional)On models with screw holes, Smart Card reader option or palm vein sensoroption, an optional hand strap can be attached.The hand strap cannot be used in conjunction with the IntermediaryVESA Mount Plate or shoulder strap.The hand strap accessory contains the following components: Hand straps,two M2x6 screws, two M2x8 screws and two spacers.60 Fujitsu
Accessories for your Tablet PC (optional)• Use the appropriate tool of the correct size when securing the screws.• Keep the screws out of the reach of children.• Do not shake the device too much when you are holding it on thehand strap, otherwise it may fall down.1122443►Remove the covers from the screw holes on the rear of the tablet PC (1).►Position the spacers between the tablet PC and the hand strap (2).►Put the hand strap in position on the tablet PC (3). Make sure that the screw holes ofthe hand strap and the tablet PC line up exactly above one another.Fujitsu 61
Accessories for your Tablet PC (optional)Only use the M2x8 screws to secure the hand strap.►Secure the hand strap with the screws (4).Shoulder strap (optional)On models with screw holes, Smart Card reader option or palm vein sensor option,an optional shoulder strap can be attached.The shoulder strap cannot be used in conjunction with the IntermediaryVESA Mount Plate or hand strap.The shoulder strap accessory contains the following components: Shoulder strap,two mountings, two M2x6 screws, two M2x8 screws and two spacers.62 Fujitsu
Accessories for your Tablet PC (optional)• Use the appropriate tool of the correct size when securing the screws.• Keep the screws and mountings out of the reach of children.• To prevent damaging the screws, do not use a motorized screwdriver.112332►Remove the covers from the screw holes on the rear of the tablet PC (1).Fujitsu 63
Accessories for your Tablet PC (optional)Only use the M2x8 screws to secure the mountings.►Position spacers under the mountings, position the mountings on the rear of thetablet PC and secure the mountings with the screws (2).►Secure the shoulder strap on the mountings (3).Folio case (optional)If you are using the folio case, we do not recommend that you connect the Tablet PCto the keyboard docking station or power keyboard docking station. Note that the unitcannot be closed in clamshell mode while the Tablet PC is attached to the folio case.• This folio case contains magnets. Keep it away from objects that may be easilyaffected by the influence of magnetism, e.g. pacemakers and magnetic cards.• Make sure the device is firmly fitted into the folio case fasteners inorder to prevent it from falling out.• The folio case is only designed to safely store and transport the device.Do not use the folio case for any other purpose.• Keep the folio case away from fire or heaters.• Neither put the folio case in direct sunlight nor expose it tohigh temperature or humidity.►Position the Tablet PC on the cover as shown.The following illustration shows you the many ways in which the cover can be used:64 Fujitsu
Accessories for your Tablet PC (optional)Fujitsu 65
Security functionsSecurity functionsSecurityfunctionsYour Tablet PC has several security features that you can use to secure your systemand your personal data from unauthorized access.This chapter explains how to use these functions, and what the benefits are.Please remember that in some cases, for example, forgetting your password,you may be locked out of the system and unable to access your data.Therefore, please note the following information:• Back up your data on external data carriers at regular intervals.• Some security functions need you to choose passwords. Make a noteof the passwords and keep them in a safe place.If you forget your passwords you will need to contact our Service Desk.Deletion or resetting of passwords are not covered by your warrantyand a charge will be made for assistance.66 Fujitsu
Security functionsConfiguring the fingerprint sensorFingerprintsens orFinger printsensorThe fingerprint sensor can record the image of a fingerprint. With additional fingerprintsoftware, this image can be processed and used instead of a password.11►Install the fingerprint software to be able to use the fingerprint sensor (1).Fujitsu 67
Security functionsUsing the palm vein sensor (device-dependent)PalmveinsensorPalmveinsensorWhether your device has a palm vein sensor or not depends on thedevice configuration which you ordered.The palm vein sensor (1) can record the image of the veins on the palm of your hand. Thisimage is evaluated with additional software and can be used in place of a password.1Prior to using the palm vein sensor for the first time Fujitsu recommends theinstallation of the provided rubber feet:►Turn the device over and place it on a stable, flat and clean surface. If necessary, lay ananti-slip cloth on this surface to prevent the device from being scratched.68 Fujitsu
Security functions22►Fasten the rubber feet with the screws (2).►Install the software to use the palm vein sensor.You can obtain further information on the palm vein sensor in the"Appendix: Miscellaneous Information".Fujitsu 69
Security functionsUsing the Security LockSecurityLockAnti-theftprotectionSecurityLockYour device comes with a Security Lock device for the Kensington Lock Cable. With theKensington Lock Cable, a sturdy steel cable, you can protect your device and the port replicatoragainst theft. The Kensington Lock Cable is available as an accessory.►Fit the Kensington Lock Cable to thecorresponding mechanism on your device.Attach another Kensington Lock Cable to your performance dockingcradle, keyboard docking station or power keyboard docking station toprotect your port replicator from theft as well.Configuring passwordprotectioninBIOSSetupUtilityBefore using the various options for password protection in the BIOS SetupUtility, please proceed as follows to increase data security:Make a note of the passwords and keep them in a safe place. If you forget yoursupervisor password you will not be able to access your Tablet PC. Passwords arenot covered by your warranty and a charge will be made for assistance.Password protectionYour password can be up to eight characters long and can contain letters andnumbers. No distinction is made between uppercase and lowercase.70 Fujitsu
Security functionsProtecting BIOS Setup Utility (supervisor passwordand user password)If you have opened these operating instructions on the screen, we recommendthat you print them out. You cannot call up the instructions on the screenwhile you are setting up the password.BIOSSetupUtilityThe supervisor password and the user password both prevent unauthorized use of the BIOSSetup Utility. The supervisor password allows you to access all of the functions of the BIOS SetupUtility, while the user password will only give you access to some of the functions. You canonly set up a user password if a supervisor password has already been assigned.Calling and using the BIOS Setup Utility is described in the chapter"Settings in BIOS Setup Utility", Page 81.Assigning the supervisor and user passwords►Start the BIOS Setup Utility and go to the Security menu.►Select the Set Supervisor Password field and press the Enter key.With Enter new Password: you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.Changes have been saved is displayed as a confirmation that the new password has been saved.►To set the user password, select Set User Password and proceed exactly aswhen configuring the supervisor password.If you do not want to change any other settings, you can exit BIOS Setup Utility.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.PasswordSupervisor passwordUserpasswordThe Tablet PC is rebooted and the new password is effective. It will now be necessary tofirst enter your supervisor or user password in order to open the BIOS Setup Utility. Pleasenote that the user password only provides access to a few of the BIOS settings.Changing the supervisor password or user passwordYou can only change the supervisor password when you have logged into theBIOS Setup Utility with the supervisor password.PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►When changing the password, proceed exactly as when assigning a password.Fujitsu 71
Security functionsRemoving passwordsTo remove a password (without setting a new password) perform the following steps:PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.You will be requested to enter the current password by the Enter Current Password prompt.Enter New Password will appear and you will be requested to enter a new password.►Press the Enter key twice at this request.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.The Tablet PC is rebooted and the password is removed.Removing the supervisor password simultaneously deactivates the user password.Password protection for booting the operating systemWith the supervisor password you have set in the BIOS Setup Utility (seesection "Assigning the supervisor and user passwords", Page 71), you canalso prevent booting of the operating system.Operating systemActivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the Password on Boot option and press the Enter key.►Select the option you require (First Boot or Every Boot) and press the enter key►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).Deactivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the Password on Boot option and press the Enter key.►Select the Disabled option and press the Enter key.If you do not want to change any other settings, you can exit BIOS Setup Utility.►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. The system is no longer password-protected.72 Fujitsu
Security functionsPassword protection for the hard diskPasswordprotect ionThe hard disk password prevents unauthorized access to the hard disk drivesand is checked internally each time the system is booted. The condition for thisis that you have assigned at least the supervisor password.Activating hard disk protection►Call up the BIOS Setup and select the Security menu.If you have not assigned BIOS passwords yet, define the supervisor and the userpassword now, if desired (see "Security functions", Page 66).►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0, mark the field Set Master Password and press the Enter key.Enter new Password then appears and you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.With Setup Notice: Changes have been saved you receive confirmation thatthe new password has been saved.►If you wish to enter a password for a second hard disk (Drive1), in the areaDrive1 mark the field Set Master Password and proceed in exactly the same wayas for the set up of the first hard disk (Drive0).The field Password Entry on Boot is set to Enabled by default. You can exit the BIOSSetup once you have finished changing the settings.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and your hard disk is now protected with a password. Thepassword prompt is enabled as soon as the Tablet PC has rebooted.Deactivating hard disk protectionTo cancel a password (without setting a new password) proceed as follows:►Call up the BIOS Setup and select the Security menu.►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0, mark the field Set Master Password and press the Enter key.With the prompt Enter current Password you are first asked to enter the old password again.With Enter new Password you are then prompted to enter a new password.►After the request, press the Enter key three times.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and there is no longer any password protection for this hard disk.►If you wish to remove a password for a second hard disk (Drive1), in the areaDrive1 mark the field Set Master Password and proceed in exactly the same wayas for the removal of the first hard disk (Drive0).Fujitsu 73
Security functionsSmartCard reader (optional)SecurityfunctionsSecurityfunctionsDepending on the selected model, your device is equipped with a Smartcard reader(only on models with screw hole and SmartCard reader option).SmartCards are not supplied as standard equipment. You can use all SmartCards that comply withthe ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.With the appropriate software you can use your SmartCard as an alternative to password protection,but also as a digital signature, for encrypting your e-mails or for home banking.We recommend that you always use two SmartCards. Always keep one of the SmartCardsin a safe place if you are carrying the other SmartCard with you.In order to be able to take advantage of all the security features of your TabletPC, you will need a CardOS SmartCard from Fujitsu.The SmartCard can only be used with a PIN, so maximum protection is maintainedeven when the SmartCard is lost. In order to maximize your security, the CardOSSmartCard is disabled if three incorrect attempts are made to enter the PIN.During first time use of your CardOS SmartCard, you must either enter the preset PIN"12345678" or the PIN which has been notified to you by your system administrator.74 Fujitsu
Security functionsInserting the SmartCardDepending on the selected model, your device is equipped with a Smartcard reader(only on models with screw hole and SmartCard reader option).Do not use force when inserting and removing the SmartCard.Make sure that foreign objects do not fall into the SmartCard reader.1►Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC.Fujitsu 75
Security functionsTrusted Platform Module - TPM (device dependent)TPMTrustedPlatform ModuleTo use the TPM, you must enable the TPM in the BIOS Setup before the software isinstalled. The requirement for this is that you have assigned at least the supervisorHDD password (see "Security functions", Page 66).Enabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 66).►Call BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select the entry Enabled to enable the TPMOnce you have enabled the TPM the Clear Security Chip menu item appears.You can clear the holder in the TPM using Clear Security Chip.WithEnabled,all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keysetc.) generated by applications are deleted.Take note that you can then no longer access the data you haveencrypted on the holder-based keys!►Select the Exit Saving Changes option in the Exit menu.►Press the Enter key and select Yes.The Tablet PC restarts and the TPM is enabled after the reboot.Disabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 66).►Call BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select the entry Disabled to disable the TPM.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC is rebooted and the TPM is disabled.76 Fujitsu
Connecting external devicesConnecting external devicesUnder all circumstances, please observe the safety notes provided in the"Important notes", Page 14 chapter before connecting or disconnectingany devices to or from your Tablet PC.Always read the documentation supplied with the device you wish to connect.Never connect or disconnect cables during a thunderstorm.Never pull at a cable when disconnecting it. Always grasp the plug.With some devices, such as USB devices, it is not necessary to switch offthe Tablet PC and the device before connecting/disconnecting. For moreinformation about whether or not devices need to be switched off, please referto the documentation supplied with your external device.Some of the external devices require special drivers (see the operatingsystem and external device documentation).Connecting an external monitorMicro HDMI portHDMIportThe micro HDMI port on your device can be used to connect an external amplifier,LCD TV or a plasma TV with an HDMI connection.►Connect the data cable to theexternal device.►Connect the data cable to the microHDMI port.Some LCD televisions have only two speakers/speaker ports and thereforecannot reproduce Dolby Digital or DTS. To play back HDMI sound, youmust change the HDMI sound settings accordingly.You can find the settings under Control Panel - Hardware and Sound. Deactivate thesettings for DTS Audio and Dolby Digital to enable playback of HDMI sound.Fujitsu 77
Connecting external devicesHDMI port (only performance docking cradle, keyboarddocking station or power keyboard docking station)HDMIportThe HDMI port can be used to connect an external amplifier, LCD TV or aplasma TV with an HDMI connection.►Connect the data cable to theexternal device.►Connect the data cable to the HDMI port.Some LCD televisions have only two speakers/speaker ports and thereforecannot reproduce Dolby Digital or DTS. To play back HDMI sound, youmust change the HDMI sound settings accordingly.You can find the settings under Control Panel - Hardware and Sound. Deactivate thesettings for DTS Audio and Dolby Digital to enable playback of HDMI sound.VGA monitor port (only performance docking cradle, keyboarddocking station or power keyboard docking station)An analog monitor is connected to the analog VGA monitor port. Screen output islimited to a maximum of two screens at the same time.MonitorVGAportScreenconnectionMonito rconnection►Switch off the Tablet PC and theexternal monitor.►Plug the data cable of the externalmonitor into the monitor port.►First switch on the external monitor andthen switch on the Tablet PC.You can also switch back and forth between the external monitor and the LCDscreen of the Tablet PC, see "Touchscreen", Page 27.You can display the same image on the external monitor and on the LCDscreen of the Tablet PC at the same time.78 Fujitsu
Connecting external devicesConnecting USB devicesUSBportsOn the USB ports you can connect external devices that also have a USB port(e.g. a DVD drive, a printer, a scanner or a modem).USB devices are hot-pluggable. This means you can connect and disconnect thecables of USB devices while the operating system is running.USB 1.x has a maximum data transfer rate of 12 Mbps.USB 2.0 has a data transfer rate of up to 480 Mbps.USB 3.0 has a data transfer rate of up to 5 Gbps.Additional information can be found in the documentation for the USB devices.►Connect the data cable to theexternal device.►Connect the data cable to the USBport on the Tablet PC.or►Connect the data cable to a USB portof the performance docking cradle.or►Connect the data cable to a USB portof the keyboard docking station.or►Connect the data cable to a USB port ofthe power keyboard docking station.Device driversUSB devices will be automatically recognized and installed by your operating system.How to remove USB devices correctlyAlways correctly remove the device according to the rules described below,to ensure that none of your data is lost.►Tap the symbol for safe removal of the hardware.►Select the device you wish to shut down and remove.►Tap OK.Wait for the dialog box which tells you that it is now safe to remove the device.Fujitsu 79
Connecting external devicesConnecting external audio devicesYour tablet PC has a combined headphone and microphone port, your (optional) performancedocking cradle has separate ports for headphones and a microphone.Connecting headphones or other audio output devicesConnectingaudio devicesAudioconnectionsConnectingheadphonesThe combined headphone and microphone port of the Tablet PC or the headphoneport of the multifunctional cable (optional) allows you to connect output devices suchas headphones, external speakers, etc., to your tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cabletothecombinedheadphone and microphone port of thetablet PC or to the headphone port of theperformance docking cradle (optional).The internal speakers are disabled.If you buy a cable from a retailer, please note the following:The combined headphone and microphone port on your Tablet PCis a "3.5 mm jack socket".If you want to connect headphones or speakers you will need a "3.5 mm jack plug".Connecting a microphone or other audio input devicesConnectingaudio devicesAudioconnectionsConnectingmicrophoneThe combined headphone and microphone port of the tablet PC or the microphone port ofthe performance docking cradle (optional) allows you to connect an external microphone,MiniDisc player, MP3 player, CD player or a tape deck to your tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cable to the combinedheadphone and microphone port of thetablet PC or to the microphones port of theperformance docking cradle (optional).80 Fujitsu
Settings in BIOS Setup UtilitySettings in BIOS Setup UtilityBIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSS etupUtilitySetupConfiguringsystemConfiguringhardwareTo navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard.The BIOS Setup Utility allows you to set the system functions and the hardwareconfiguration for the Tablet PC.When the Tablet PC is delivered, the default settings are effective. You can changethese settings in the menus of the BIOS Setup Utility. Any changes you make takeeffect as soon as you save and exit the BIOS Setup Utility.The BIOS Setup Utility program contains the following menus:About Displays information relating to the BIOS, processor and Tablet PCSystem Advanced system settingsAdvanced Configuration of various hardware components, such as mouse, keyboard,processorSecurity Password settings and security functionsBoot Configuration of the start-up sequenceExit Exits the BIOS Setup UtilityStarting the BIOS Setup Utility►Keep the decrease volume button pressed down and switch the Tablet PC on.BIOSSetupUtility►If a password has been assigned, enter the password and press the Enter key.If you have forgotten the password, contact your system administratoror contact our customer service centre.The BIOS Setup Utility starts.Fujitsu 81
Settings in BIOS Setup UtilityBIOS Setup Utility operationBIOSSetupUtilityPress the F1 key to display help about operation of the BIOS Setup Utility. The descriptionof the individual settings is shown in the right-hand window of the BIOS Setup Utility.With the F9 key you can load the default settings of the BIOS Setup Utility.►Use the cursor keys ←or →to select the menu you wish to access to make changes.The menu is displayed on the screen.►Select the option you want to change with the cursor keys ↑or ↓.►Press the "Enter" key.►Press the ESC key to exit the selected menu.►For future reference, make a note of the changes you have made (for example, in this manual).82 Fujitsu
Settings in BIOS Setup UtilityExiting BIOS Setup UtilityBIOSSetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:Exit Saving Changes - save changes and exit BIOS Setup Utility►To save the current menu settings and exit the BIOS Setup Utility,selectExit Saving Changes and Yes.The Tablet PC is rebooted and the new settings come into effect.Exit Discarding Changes - Reject changes andexit BIOS Setup Utility►To discard the changes, select Exit Discarding Changes and Yes.The settings which were valid when BIOS Setup Utility was called remain effective.The BIOS Setup Utility ends and the Tablet PC is rebooted.Load Setup Defaults – load default values►To copy the standard entries for all menus of the BIOS Setup Utility,choose Load Setup Defaults and Ye s .Discard Changes - Discard Changes withoutexiting BIOS Setup Utility►To discard the changes you have made, select Discard Changes and Yes.ThesettingsinplacewhenBIOS Setup Utility was called remain effective.You can now make additional settings in the BIOS Setup Utility.►If you want to exit the BIOS Setup Utility withthesesettings,selectExit Saving Changes and Yes.Save Changes - save changes without exitingthe BIOS Setup Utility►To save the changes, select Save Changes and Yes.The changes are saved. You can now make additional settings in the BIOS Setup Utility.►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.Save changes and power off►To save the changes and switch off your device, select Save Changes and Power Off and Yes.The changes are saved. Your device is shut down.Fujitsu 83
Troubleshooting and tipsTroubleshooting and tipsTroubleshootingTipsFaultProblemsolvingIf a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:►Make a note of the steps and the circumstances that led to the fault. Alsomake a note of any error messages displayed.►Switch the Tablet PC off.►Please contact the Hotline/Service Desk.You can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• The model name and serial number of the Tablet PC. The serial numberis located on a sticker on the underside of the Tablet PC.• Notes with the messages that appeared on the screen andinformationonacoustic signals.• All changes you have made to the hardware or software after receiving the Tablet PC.• All changes you have made to the BIOS Setup settings after receiving the Tablet PC.• Your system configuration and all peripheral devices connected to your system.• Your sales contract.Our Tablet PCs have been designed primarily with mobile applications in mind.This means that considerable effort has been made to optimize components andequipment in terms of weight, space and energy requirements. Depending on theparticular configuration you have purchased, it is possible that functionality may beslightly reduced compared to a desktop PC if you are running processor-intensivegaming software, e.g. games with intensive 3D graphics. Updating your hardware withdrivers which have not been approved by Fujitsu may result in performance losses,data losses or malfunction of the equipment. A list of approved drivers and currentBIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"84 Fujitsu
Troubleshooting and tipsExecuting a resetIf the device no longer responds to your inputs, choose one of the following options:Forced shutdown►Press and hold the ON/OFF button for at least 4 seconds.The device will be shut down. You can then restart it.Resetting the rechargeable battery►Shut down the device.If the device does not respond, you may have to force the shutdown,as described in the previous section.►Disconnect the AC adapter from the device.►Press the increase volume button and the shortcut button at the same time.The device resets in a similar way to the removal of the rechargeablebattery. You can then restart it.Help if problems occurShould you encounter a problem with your computer that you cannot resolve yourself:►Note the ID number of your device. The ID number is found on the type ratingplate on the back or underside of the casing.►For further clarification of the problem, contact the Fujitsu Service Desk. When you dothis, please have ready the ID number and serial number of your system.Recovering your Factory ImageIn the event you need to restore your original Factory Image, please refer tothe appendix of this Operating Manual.The Tablet PC’s date or time is incorrectSummertimeWintertim eIncorrecttim eTimenotcorr ectWrongdate/timeDatenotcorrectCharging back-upbat teryCause TroubleshootingTime and date are incorrect. ►With the BIOS-Setup-Utility, you can set thedate and time in the Main menu.Date and time are still set incorrectly afterswitchingontheTabletPC.►Please contact your sales outlet or ourhotline/service desk.Fujitsu 85
Troubleshooting and tipsBattery indicator does not illuminateCause TroubleshootingThe battery is discharged. ►Charge the battery.or►Connect the Tablet PC to a poweroutletusing the AC adapter.The Tablet PC’s touchscreen remains darkTou ch s c re e ndark touchscreenCause TroubleshootingTouchscreen is switched off. ►Press a key (external keyboard) or tap onthe touchscreen.External monitor or television set connected. ►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The display on the Tablet PC’s touchscreenis difficult to read.Tou ch s c re e nTo u ch s c re e nCause TroubleshootingReflected glare ►Move the Tablet PC into a different position.►Increase the brightness of the screen.86 Fujitsu
Troubleshooting and tipsThe external monitor remains blankMonitorCause TroubleshootingMonitor is switched off. ►Switch the external monitor on.Power saving has been activated (monitor isblank).►Press a key (external keyboard) or tap onthe touchscreen.Brightness is set to dark. ►Adjust the brightness of the monitor.Screen output is set to the Tablet PCtouchscreen.►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The external monitor’s AC cable or data cable isnot connected properly.►Switch off the Tablet PC and the externalmonitor.►Check whether the AC cable is pluggedproperly into the external monitor and intothe power outlet.►Check that the data cable is properlyconnected to the Tablet PC and the externalmonitor (if it is plugged in with a connector).►Switch on the external monitor and theTablet PC.The external monitor is blank or the image is unstableMonitorM onitorCause TroubleshootingThe wrong external monitor has been selectedor the wrong screen resolution has been set forthe application program.►Terminate the application program inWindows. If the error persists afterterminating the program, use the keycombination for switching the screen outputin order to switch to the touchscreen of theTablet PC. Change the following setting:►Set the screen resolution: Set the screenresolution as described in the documentationfor your operating system.►Select monitor: Select monitor 1 or 2 asdescribed in the documentation for youroperating system.The cursor does not correctly follow thestylus movementsCause TroubleshootingStylus incorrectly calibrated. ►Calibrate the stylus as described in chapters"Adjusting the stylus", Page 35 and"Calibrating the stylus", Page 36.Fujitsu 87
Troubleshooting and tipsStylus input not workingCause TroubleshootingIncorrect driver installed. ►If your device is one which can only beoperated using the stylus, install the driverfor the standard model.or►If your device is one which can beoperated using the stylus and by finger,install the driver for the "Dual Digitizer"model.The Tablet PC does not start after switch onTabletPCCause TroubleshootingThe battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.The AC adapter is not connected properly. ►Check whether the AC adapter is properlyconnected to the Tablet PC.►Switch the Tablet PC on.The Tablet PC stops workingTabletPCEndingCause TroubleshootingThe Tablet PC is in energy saving mode. ►End energy saving mode.An application program has caused themalfunction.►Close the application program or restartthe Tablet PC (by restarting the operatingsystem or switching the device off and backon again).The battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.88 Fujitsu
Troubleshooting and tipsThe printer does not printPrinterdoesnot printCause TroubleshootingThe printer is not switched on. ►Make sure that the printer is switchedon and ready for operation (refer to thedocumentation supplied with the printer).The printer is not connected correctly. ►Check that the data cable between the TabletPC and the printer is properly connected.The printer driver is faulty or not correctlyinstalled, or it is the wrong printer driver.►Check that the data cable between the TabletPC and the printer is properly connected.►Check whether the correct printer driver isloaded (refer to the printer documentation).The wireless connection to a network does not workThewireless connectionto anetwork doesnotwor kCause TroubleshootingThe wireless component is switched off. ►Switch the wireless component on (see"Switching the wireless components on andoff", Page 43).The wireless component is switched on. Despitethis, the wireless connection to a network doesnot work.►Check whether the wireless connection isenabled by the software.►Further information on using the wirelesscomponent can be found in the help files.The battery discharges too quicklyBatteryCause TroubleshootingThe battery is either too hot or too cold. In thiscase the battery indicator flashes.►Bring the Tablet PC up/down to a normaloperating temperature again.►If the operating time of the battery life isextremely short, the battery is probably tooold. Replace the battery if necessary.You may have an application running thatconsumes a great deal of power due to frequentaccessing of the hard disk or optical drive.►Use the AC adapter whenever possible.The maximum brightness may have been setfor the screen.►Reduce the brightness of the screen tolower energy consumption: You will find thesetting under Control Panel – Hardware andSounds – Windows Mobility Center.Fujitsu 89
Troubleshooting and tipsSmart Card reader is not recognizedCause TroubleshootingSmart Card inserted incorrectly. ►Make sure you have inserted your SmartCard into the Smart Card reader withthe chip facing upwards / downwards(device-dependent).►Check whether the Smart Card you areusing is supported. Your Smart Card mustcomply with the ISO standard 7816-1, -2,-3 and -4.SmartCard PIN forgottenCause TroubleshootingPIN forgotten ►If you work in a network, contact yoursystem administrator, who can unlock yourTablet PC using a supervisor PIN.User and/or supervisor Smart Card lostCause TroubleshootingUser and/or Supervisor Smart Card lost. ►If you have lost your user Smart Card, youcan continue working with the SupervisorSmart Card and initialize a new user SmartCard.►If you have lost the Supervisor Smart Card,you can also continue working, but you nolonger have all rights and cannot initializeanother Supervisor Smart Card.►If you have lost both Smart Cards, youcannot boot your system. Please contact ourcustomer service center. You must provideproof of ownership for the device. Thecustomer service center will then refer youto our service partner, who will unlock yourdevice (for a charge).90 Fujitsu
Troubleshooting and tipsSmartCard lostCause TroubleshootingSmartCard lost. ►If you work in a network, contact yoursystem administrator, who can boot yourTablet PC with a supervisor SmartCard.Acoustic warningAcous tic wa rnin gsErrorsCause TroubleshootingA beep sounds every few seconds.The battery is almost dead.►Charge the battery.Error messages on the screenErrormessages onthes creenErrorsThis section describes the error messages generated by the BIOS Setup. Error messages displayedby the operating system or programs are described in the documentation for these programs.If the error message appears repeatedly despite troubleshooting measures,contact the place of purchase or our customer service center.Fujitsu 91
Troubleshooting and tipsError message/cause TroubleshootingCMOS battery badIf the error message occurs repeatedly, thebuffer battery in the Tablet PC is flat.►Contact your sales outlet or our customerservice center.System CMOS checksum bad - Default configurationusedThe system configuration information isincorrect.►Switch the Tablet PC off.►Switch the Tablet PC on.►In the BIOS Setup, select the Exit menu.►Select the entry Load Setup Defaults.►Select OK and press the Enter key.Extended memory failed at offset: xxxx Failing Bits:zzzz zzzzWhen testing the extended memory. an errorhas resulted at the address xxxx.►Contact your sales outlet or our customerservice center.Failure Fixed Disk nThe settings of theharddiskdriveareincorrect.►Start the BIOS Setup (Primary Mastersubmenu) and select the correct settings.Keyboard controller error ►Switch your Tablet PC off with the ON/OFFbutton.►Wait 3 - 5 seconds and switch the Tablet PCon again.Keyboard error If you use an external keyboard:►Check the connection and reboot the TabletPC.nn Stuck key ►Make sure that no key is pressed.Operating system not found ►Check in the BIOS Setup whether your harddisk has been set correctly.►Make sure that the operating system isinstalled on the corresponding drive.Press <F1> to resume, <F2> to SETUPThis error message appears if an error occursduring the self-test before starting the operatingsystem.►Press theAlt tablet button to boot theoperating systemReal time clock error ►Contact your sales outlet or our customerservice center.nnnnK Shadow RAM failed at offset: xxxx FailingBits: zzzz►Contact your sales outlet or our customerservice center.System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customerservice center.System cache error - Cache disabled ►Contact your sales outlet or our customerservice center.System timer error ►Contact your sales outlet or our customerservice center.92 Fujitsu
Technical dataTechnical dataTablet PCGeneralProcessor 5th Generation Intel® Core™ with vPro™technology (vPro optional, dependent onconfiguration)Main memory (SO DIMM) 4 GByte / 8 GByte DIMM onboardElectrical dataSafety regulations complied with CEProtection class IIMaximum power consumption (when theTablet PC is switched on, connected to thekeyboard docking station and the battery isbeing charged):65 WTouchscreenSize 13.3" Full HD Wide ViewScreen resolution 1920 x 1080 / 16 million colorsPixel class IIBrightness control 12 levelsTechnology Wide-View High-Bright Display with LEDbackground lightingDigitizer and glass panel Dual digitizer with anti-glare touch screenCameras • Front: HD camera• Back: 5 megapixels, autofocus, mobile lightGraphics cardChip Intel (c) HD Graphics 5500Maximum resolution of external display: 4096 x 2160DimensionsWidth x Depth x Height •Standard Shell tablet only: 12.56 x 8.19 x0.5 inches (319 x 208 x 12.7 mm)• Standard Shell tablet with keyboard dockingstation w/o battery: 12.56 x 9.76 x 1.1.7inches (319 x 248 x 29.6 mm)•Standard Shell tablet with power keyboarddocking station w/ battery: 12.56 x 9.76 x1.33 inches (319 x 248 x 33.8 mm)Fujitsu 93
Technical dataWeight depending on configuration • Standard Shell tablet only: 2.15 lbs / 0.98 kg• Standard Shell tablet with keyboard dockingstation w/o battery: 4.13 lbs / 1.87 kg• Standard Shell tablet with power keyboarddocking station w/ battery: 4.56 lbs / 2.07 kgWeight may vary depending on actualconfiguration (including battery pack).Input devicesTablet buttons 3 keysStylus Stylus with a pressure buttonSlotsMemory card slot 1 x Micro SDSIM card slot 1 x Micro SIMSmart Card slot (optional shell) 1xPortsCombined headphones and microphone port 3.5mmstereominijackDocking port 1 xMicro HDMI port 1 xUSB (Universal Serial Bus) 1 x USB 2.0, 1 x USB 3.0Security Lock device 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35 °C / 41 °F .... 95 °FTransport temperature (2K2) –15 °C .... 60 °C / 5 °F .... 140 °FWLAN specificationsType of networkIntel® Dual Band Wireless-AC 8260 (Snowfield Peak – 11ac/abgn), 8260NGW Wi-Fi based*Transfer rate (Automatic switching) IEEE802.11 a and g: 54Mbps max. data rate; IEEE802.11n: 300 Mbpsmax. data rate, IEEE802.11ac: 867 Mbps max.data rateActive frequency • 802.11n: 2.4 GHz or 5 GHz• 802.11b/g: 2400~2473 MHz• 802.11a: 4900~5850 MHz• 802.11ac: 2.4 GHz / 5 GHz94 Fujitsu
Technical dataTypical operating distances** • 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91m)@6Mbps• 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91m)@6Mbps• 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.(91m)@1Mbps• 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.(91m)@1Mbps• 802.11n: Estimated double the operatingdistance of 802.11g and 802.11a in theirrespective frequenciesNumber of channels • 802.11a: 8 independent channels• 802.11b/g: 11 channels, 3 non-overlappingchannels• 802.11n: Channel bonding takes two ofthe non-overlapping 20MHz channels andcombines it into one 40MHz channel. It isactually 12 non-overlapping channels withchannel bonding and 24 without. Also it is 1non-overlapping channel in 2.4GHz whenchannel bonding is used.• 802.11ac: 5 independent channelsSecurity Encryption types: compatible with WEP, TKIP,AES***, WPA 1.0 and WPA 2.0Encryption key, lengths supported: 64 bits and128 bitsMaximum recommended number of computersto be connected over wireless LAN (during adhoc connection)10 units or less ***** “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees theinterconnectivity of wireless LANs (Wi-Fi Alliance) was passed.** The operating distances given above increase or decrease depending on factors such as thenumber of walls, reflecting material or interference by external RF sources.*** Network key encryption (WEP) occurs with the number of bits given above, after deduction ofthe fixed length of 24 bits the user may however also set 40 or 104 bits.**** Depending on the particular practical application, the number of computers which can benetworked is reduced if necessary.Fujitsu 95
Technical dataRechargeable batteryYou can find information on the batteries used in your device on the Internet at"http://solutions.us.fujitsu.com/www/content/support/contact/index.php".3-cell lithium polymer battery 4250 mAhRated voltage 10.8 VRated capacity 46 WhAC adapter 65 W for the Tablet PCTechnicaldataRated voltage 19 VMax. rated current 3.42 AAn additional AC adapter or AC cable can be ordered at any time.Performance docking cradle (optional)Electrical dataSafety regulations complied with CEProtection class IIIPortsHeadphone port 3.5 mm stereo mini jackMicrophone port 3.5 mm stereo mini jackDocking port 40-pinHDMI port 1 xVGA monitor port 1xUSB (Universal Serial Bus) 3xUSB3.0LAN port 1 xSecurity Lock device 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35 °C / 41 °F .... 95 °FTemperature in transit –15 °C .... 60 °C / 5 °F .... 140 °F96 Fujitsu
Technical dataAC adapter 65 W for the performance docking cradle (optional)TechnicaldataRated voltage 19 VMax. rated current 3.42 AAn additional AC adapter or AC cable can be ordered at any time.Keyboard docking station or power keyboarddocking station (optional)Electrical dataSafety regulations complied with CEProtection class IIIPortsDocking port 16-pinUSB (Universal Serial Bus) 3xUSB3.0VGA monitor port 1xLAN port 1 xHDMI port 1 xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35 °C / 41 °F .... 95 °FTemperature in transit –15 °C .... 60 °C / 5 °F .... 140 °FRechargeable battery for power keyboard dockingstation (device-dependent)You can find information on the batteries used in your device on the Internet at"http://solutions.us.fujitsu.com/www/content/support/contact/index.php".3-cell lithium polymer battery 4170 mAhRated voltage 10.8 VRated capacity 45 WhFujitsu 97
Technical dataIntermediary VESA Mount PlateDimensionsWidth x Depth x Height 222 mm x 91 mm x 12.2 mm /8.74 in x 3.58 in x 0.48 inWeight 130 g / 0.29 lbsHand strap (optional)DimensionsWidth x Depth x Height 478 mm x 77 mm x 13 mm /18.8 in x 3.03 in x 0.51 inWeight approx. 24 g / 0.053 lbs.Shoulder strap (optional)DimensionsWidth x Depth x Height 1265 mm x 25 mm x 4.8 mm /49.80 in x 0.98 in x 0.189 inWeight approx. 33.4 g / 0.074 lbs.Folio case (optional)DimensionsWidth x Depth x Height 460 mm x 273 mm x 16 mm /18.11 in x 10.75 in x 0.63 inWeight approx. 390 g / 0.86 lbs.98 Fujitsu
Manufacturer’s notesManufacturer’s notesDisposal and recyclingNotesYou can find information on this subject on your Tablet PC or on our website("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/").Recycling your batteryOver time, the batteries that run your mobile computer will begin to hold a charge for ashorter amount of time; this is a natural occurrence for all batteries. When this occurs,you may want to replace the battery with a fresh one*. If you replace it, it is importantthat you dispose of the old battery properly because batteries contain materials thatcould cause environmental damage if disposed of improperly.Fujitsu is very concerned with environmental protection, and has enlisted the services of theRechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organizationdedicated to protecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thousands of locations throughout the United States andCanada. To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.If there are no convenient RBRC locations near you, you can also go to the EIA ConsumerEducation Initiative website "http://EIAE.org/ " and search for a convenient disposal location.Remember – protecting the environment is a cooperative effort, and we mustmake every effort to protect it for current and future generations.* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping siteat "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.** RBRC is an independent third party to which Fujitsu provides funding forbattery recycling; RBRC is in no way affiliated with Fujitsu.DOC (Industry CANADA) NoticesDOC(INDUSTRYCANADA)NOTICESRadios and TelevisionThis Class B digital apparatus meets all requirements of Canadian Interference-Causing EquipmentRegulations.CET appareil numérique de la class B respecte toutes les exigence du Réglementsur le matérial brouilleur du Canada.Fujitsu 99
Manufacturer’s notesUL NoticeIMPORTANT SAFETY INSTRUCTIONSThis unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output ratingof 19 VDC, with a minimum current of 3.42A (65W). The correct output rating is indicated on theAC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:When using your Tablet PC equipment, basic safety precautions should always be followed toreduce the risk of fire, electric shock and injury to persons, including the following:• Do not use this product near water for example, near a bathtub, washbowl, kitchensink or laundry tub, in a wet basement or near a swimming pool.• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in afire. They may explode. Check with local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSFor Authorized Repair Technicians OnlyCAUTION:For continued protection against risk of fire, replace only with thesame type and rating fuse.WARNING:Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace onlywith the same or equivalent type recommended by the manufacturer.Dispose of used batteries according to the manufacturer’s instruction.100 Fujitsu
Manufacturer’s notesENERGY STAR ComplianceYour Fujitsu system is an ENERGY STAR qualified mobile PC. Bychoosing a computer with the latest energy-saving technology, you’rehelping to preserve our environment for future generations. ENERGYSTAR is a joint program of the U.S. Environmental Protection Agency,U.S. Department of Energy, Natural Resources Canada, and othergovernments around the world helping us save money while protectingthe environment through energy efficient products and practices. Withenergy costs and global warming top-of-mind for consumers, Fujitsu iscommitted to offering solutions that help consumers conserve energyand improve the quality of our environment.Sleep mode:You will notice that your computer is initially set so that the display turns off after 10 minutes ofuser inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. Whengoing into Sleep mode, the computer also reduces the speed of any active Ethernet networklinks. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.Energy saving benefits:Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standardequipment – saving half in utility costs. But more than that, ENERGY STAR also makes a differencefor the environment. Did you know that the average house can be responsible for twice thegreenhouse gas emissions as the average car? That’s because every time you flip on a lightswitch, run your dishwasher, or turn on your PC, you use energy, which means more greenhousegas emissions from power plants. So the more energy we can save through energy efficiency,the more we help to reduce greenhouse gases and the risks of global warming.To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".To read about how Fujitsu is supporting Sustainable Management along withseveral other environmental activities, visit the Fujitsu Corporate Citizenship page at:"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".Fujitsu 101
Declarations of conformityDeclarations of conformityDeclarationsof conformityThis device complies with Part 15 of the FCC Rules. Operations are subject to the following twoconditions: (1) This device may not cause harmful interference, (2) this device must accept anyinterference received, including interference that may cause undesired operation.102 Fujitsu
FCC and IC Regulatory InformationFCC and IC Regulatory InformationPlease note the following regulatory information related to the wireless LANdevice.Regulatory Notes and StatementsWireless LAN, Health and Authorization for useRadio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels ofthese emissions, however, are far much less than the electromagnetic energy emissions from wirelessdevices such as mobile phones. Wireless LAN devices are safe for use by consumers because theyoperate within the guidelines found in radio frequency safety standards and recommendations. Theuse of Wireless LAN devices may be restricted in some situations or environments, such as:• On board an airplane, or• In an explosive environment, or• In situations where the interference risk to other devices or services isperceived or identified as harmful.In cases in which the policy regarding use of Wireless LAN devices in specific environments isnot clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtainauthorization to use these devices prior to operating the equipment.Regulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructionsincluded in the user documentation provided with the product. Any changes or modifications madeto this device that are not expressly approved by the manufacturer may void the user’s authority tooperate the equipment. The manufacturer is not responsible for any radio or television interferencecaused by unauthorized modification of this device, or the substitution or attachment of connectingcables and equipment other than those specified by the manufacturer. It is the responsibility of theuser to correct any interference caused by such unauthorized modification, substitution or attachment.The manufacturer and its authorized resellers or distributors will assume no liability for any damageor violation of government regulations arising from failure to comply with these guidelines.This device must not be co-located or operated in conjunction with any other antenna or transmitter.For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it isrestricted to indoor environments, and the antenna of this device must be integral.Federal Communications Commission and IndustryCanada statement:This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not causeinterference, and, (2) This device must accept any interference, including interferencethat may cause undesired operation of this device.Fujitsu 103
FCC and IC Regulatory InformationDéclaration d’Industrie CanadaCet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnementest soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférencenuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris cellespouvan t causer un mauvais fonctionnement de l’appareil.FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy. If not installed and used in accordance withthe instructions, it may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the distance between the equipment and the receiver.3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.4. Consult the dealer or an experienced radio/TV technician for help.FCC Radio Frequency Exposure statementThe available scientific evidence does not show that any health problems are associated withusing low power wireless devices. There is no proof, however, that these low power wirelessdevices are absolutely safe. Low power wireless devices emit low levels of radio frequencyenergy (RF) in the microwave range while being used. Whereas high levels of RF can producehealth effects (by heating tissue), exposure to low-level RF that does not produce heatingeffects causes no known adverse health effects. Many studies of low-level RF exposure havenot found any biological effects. Some studies have suggested that some biological effectsmight occur, but such findings have not been confirmed by additional research.The wireless LAN radio device has been tested and found to comply with FCC radiationexposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency(RF) Exposure Guidelines in Supplement C to OET65.The exposure standard for wireless devices employs a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.This device is compliant with SAR for general population /uncontrolled exposure limits inANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance withthe measurement methods and procedures specified in OET Bulletin 65 Supplement C,and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposureguidelines when tested with the device operating conditions.104 Fujitsu
FCC and IC Regulatory InformationDéclaration de la FCC/d’Industrie Canada surl’exposition aux radiofréquencesLa norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unitéde mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ontdéfini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limitesd’exposition générales de la population/non contrôlées définies par les règles C95.1-1992 del’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodeset procédures de mesure spécifiées dans le supplément C du bulletin 65 de l’OET (Officed’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testéselon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révéléconforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.Export restrictionsThis product or software contains encryption code which may not be exported or transferredfrom the US or Canada without an approved US Department of Commerce export license.This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interferencethat may cause undesirable operation. Modifications not expressly authorized by FujitsuAmerica, Inc. may invalidate the user’s right to operate this equipment.Restrictions concernant l’exportationCe produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré duCanada ou des États-Unis sans un permis d’exportation du département du commerce desÉtats-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à lanorme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit acceptertoutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnementde l’appareil. Toute modification n’ayant pas été expressément approuvée par la société FujitsuAmerica Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.Canadian NoticeThe device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potentialfor harmful interference to co-channel mobile satellite systems.In addition, users are cautioned to take note that high power radars are allocated as primaryusers (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and theseradars could cause interference and/or damage to LE-LAN devices.Fujitsu 105
FCC and IC Regulatory InformationAvis pour le CanadaLe matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utiliséuniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé auxsystèmes mobiles par satellite fonctionnant sur un même canal.En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissancesont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) desbandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférenceset/ou des dommages aux appareils de réseau exempts de licence.106 Fujitsu
AppendixAppendixBefore Using the Optional Wireless LANThis manual describes the procedures required to properly set up and configure the optionalintegrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of themanual). Before using the WLAN device, read this manual carefully to ensure its correctoperation. Keep this manual in a safe place for future reference.Wireless LAN Devices Covered by this DocumentThis document is applicable to systems containing the following device:•Intel® Dual Band Wireless-AC 8260Characteristics of the WLAN Device• The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.• The WLAN devices operate in license-free RF bands, eliminating the need to procurean FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHzUnlicensed National Information Infrastructure (UNII) bands.• The WLAN devices are capable of five operating modes: IEEE802.11a, IEEE802.11ac,IEEE802.11b, IEEE802.11g, and IEEE802.11n.• The WLAN device is Wi-Fi certified and operates (as applicable) at a the maximumdata rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this configuration); 54 Mbpsin IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.• The WLAN devices support the following encryption methods - WEP,TKIP, CKIP, and AES encryption.• The Wireless LAN devices are compliant with the following standards: WPA,WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.Wireless LAN Modes Using this DeviceAd Hoc Mode"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivitybetween multiple computers is established without a central wireless network device, typicallyknown as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peerfashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hocnetworks are an easy and inexpensive method for establishing network connectivity betweenmultiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryptionkey settings are identically configured on all computers in the Ad Hoc network.Fujitsu 107
AppendixAccess Point (Infrastructure) ModeInfrastructure mode refers to a wireless network architecture in which devices communicate withwireless or wired network devices by communicating through an Access Point. In infrastructuremode, wireless devices can communicate with each other or with a wired network. Corporatewireless networks operate in infrastructure mode because they require access to the WLAN inorder to access services, devices, and computers (e.g., file servers, printers, databases).108 Fujitsu
Appendix**** = An optional hub for a wired LAN maybe required depending upon the typeof access point used.** = ADSL modem, cable modem, or similarHow to Handle This DeviceThe WLAN device is an optional device that may come pre-installed in your mobile computer. Undernormal circumstances, it should not be necessary for you to remove or re-install it. The OperatingSystem that your mobile computer comes with has been pre-configured to support the WLAN device.• Integrated Intel Centrino wireless LAN devices support IEEE802.11a,IEEE802.11b, IEEE802.11g, and IEEE802.11n.• The WLAN device operates in the 2.4 GHz ISM band and the 5 GHzlower, middle, and upper UNII bands.• Microwave ovens may interfere with the operation of WLAN devices since they operate in thesame 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwavesdoes not occur with IEEE802.11a radio which operates in the 5 GHz RF band.• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLANdevices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,intermittent disconnects, and many frame errors. It is HIGHLY recommended that theseinterfering devices be powered off to ensure proper operation of the WLAN device.Fujitsu 109
AppendixDeactivating/Disconnecting the WLAN DeviceDisconnecting the WLAN device may be desired in certain circumstances (to extend batterylife) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). TheWLAN device can be disconnected in Windows using the WLAN icon in the system tray(Note that disconnecting via the icon in the system tray does not turn off the radio; itcontinues to transmit and receive even though it’s not connected.)The radio components are switched on and off using the appropriate functions of the operating system.►To switch radio components on and off individually, select Settings – ChangePC settings – Wireless – Wireless devices – Off.Configuring the Wireless LANThe optional WLAN device can be configured to establish wireless network connectivityusing the software that is built into Windows. Support for most industry standardsecurity solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult withyour network administrator for these parameters:Connection to the networkAfter you have configured your computer, you can connect to an active networkby performing the following steps:1. Click on the WLAN icon in the system tray.2. Select Connecttoanetwork.3. Select a network from the list that appears, and click the Connect button.110 Fujitsu
AppendixTroubleshooting the WLANCauses and countermeasures for troubles you may encounter while using yourwireless LAN are described in the following table.Problem Possible Cause Possible SolutionIncorrect network name (SSID)or network keyAd hoc connection: verify thatthe network names (SSID’s)and network keys (WEP) ofall computers to be connectedhave been configured correctly.SSID’s and WEP key valuesmust be identical on eachmachine.Access Point (Infrastructure)connection: set the networkname (SSID) and network keyto the same values as those ofthe access point.Set the Network Authenticationvalue identically to that of theAccess Point. Please consultyour network administrator forthis value, if necessary.Unavailable network connectionWeak received signal strengthand/or link qualityAd hoc connection: Retryconnection after shorteningthe distance to the destinationcomputer or removing anyobstacles for better sight.Access Point (Infrastructure)connection: Retry connectionafter shortening the distance tothe access point or removingany obstacles for better sight.Fujitsu 111
AppendixProblem Possible Cause Possible SolutionThe WLAN device wasdeactivated or is disabledCheck if the wireless switchis turned On. Go to Start >Control Panel, and doubleclickon Windows Mobility Center.Ifthe wireless network is off, clickthe Turn wireless on button.The computer to be connectedis turned offCheck if the computer to beconnected is turned ON.Incorrectly configured networksettingsRecheck the configuration ofyour network settings.RF interference from AccessPoints or other wirelessnetworksThe use of identical oroverlapping RF channelscancause interference with theoperation of the WLAN device.Change the channel of yourAccess Point to a channelthat does not overlap with theinterfering device.Wireless network authenticationhas failedRe-check your NetworkAuthentication, Encryption,and Security settings.Incorrectly configuredsecurity settings such asan incorrectly typed WEPkey, a mis-configured LEAPusername, or anincorrectlychosen authentication methodwill cause theLANdevicetoassociate but not authenticateto the wireless network.Unavailable network connection(continued)Incorrect IP addressconfigurationThis only applies to networksusing static IP addresses.Please contact your networkadministrator for the correctsettings.Image Backup and Recovery ProceduresThank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing youthe best computing experience with your new system.It is very important that you create DVD copies of your Recovery Image and Bootable Diskbefore beginning to use your system. To do so, follow the instructions in the “Creating aBackup of Bootable Disk and Recovery Image” section of this document.It is also important that you create a copy of the software that is essential for your system to access theinternet (hereafter called “essential access software”) to external writable media or an external drive.To do so, follow the instructions in the “Creating a Backup of the System-Specific Software Drivers”.112 Fujitsu
AppendixCreating a Backup of Bootable Disk and Recovery ImageWhen you purchased your new system, a copy of the recovery image was loaded into ahidden partition on your hard disk drive. Having a copy of the recovery image available toyou means that in the event of system failure, you will be able to restore it and re-installthe essential access software using Fujitsu Software Auto Installer.To make a copy of the recovery image to DVD disks, you will need three or four blankdisks to create the copy. After creating the copy, be sure to label the disks and keepthem in a safe place to ensure they do not get damaged.Note: If your system does not have an internal writable DVD drive, connect yoursystem to an external drive* before beginning the following steps.1. Launch System Restore and Recovery from the desktop icon. It will allow you to createthe Bootable Disk and the Recovery Image Disk Set.2. On “Step 1: Select the Bootable Disk from the list”:a. Select a media type.b. Notice the number of disks that are needed for the set.c. Click Next to proceed.3. On “Step 2: Confirm your Recovery Disk”, click Next.4. On “Step 3:” follow the on-screen instructions to make the disk or disk set, then clickStart. It takes approximately 20 minutes to make one disk.5. On “Step 4”, when the disk creation is completed, a message appears.Click Finish to exit the program.6. Repeat Step 1: Select Recovery Disk from the list and repeat the abovesteps 2(a), 2(b), 2(c), 3, 4 and 5.* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, SOME MEDIATYPES MAY BE INCOMPATIBLE FOR CREATING IMAGE BACKUPS.Fujitsu 113
AppendixCreating a Backup of Essential Access SoftwareWhen you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to“C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packagesalong with the extracted Auto Installer software package to a selected location. It is recommendedthat you save these packages to writable media or an external drive. This ensures that in theevent of system failure you will be able to re-install the essential access software.1. Open the C:\Fujitsu\Drivers\AutoInstaller\ folder2. Run “Fujitsu Software Extractor” as an Administratora. Right-click on Fujitsu Software Extractor.b. Select the “Run as Administrator” option from the menu that is displayed.3. The default save location is C:\Fujitsu\ AutoInstaller\ Drivers\. You can change the locationby clicking on the Browse button and selecting your preferred location.Note: It is recommended that you change the default location and save thesoftware packages to the external writable media or drive.4. Click on the Save Packages button.5. Fujitsu Software Extractor copies the zipped software packages and Readme files,and extracts the Auto Installer folder to the selected location.Note: The extracted Auto Installer will later be used to install the softwareautomatically on the system in the event of generic image restoration whenthe software is not pre-installed in the image.RECOVER YOUR SYSTEM WHEN THE HARDDRIVE IS STILL ACCESSIBLEUsing the Recovery and Utility ToolsThe Recovery and Utility tools consist of a variety of tools that will help you recover yourrecovery image and system images, and delete the data from your hard disk.Methods for accessing the utilitiesRecovery and Utility Tools are preinstalled in a hidden partition by the factory, orthey can be accessed by using the bootable disk.Note: The Recovery and Utility tools may be deleted from your hard diskdrive if you modify the partitions. If that occurs, you will not be able touse the hidden partition for booting to Recovery and Utility Tools, but youwill still be able to boot from the Bootable Disk.114 Fujitsu
AppendixDetermining whether Recovery and Utility is pre-loaded1. Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key.2. Use the Tab key to get to the Application Menu.3. Check whether the Recovery and Utility option is present. If it is not present, it meansthat the utility must be used from the Bootable Disk. Proceed to “Running Recovery andUtility from the Bootable Disk” if Recovery and Utility is unavailable.Running Recovery and Utility from hard disk1. Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key.2. Use the Tab key to get to the Application Menu.3. Cursor down to Recovery and Utility and press the Enter key.4. Choose your language, if necessary. Select Recovery and Utility to proceed.5. Three tool options appear: Diagnostics,Recovery, and Utility (refer to the Recovery andUtility tools section below for instructions on how to use these tools).6. If this was successful please skip the next step and go to “Recovery and Utility tools.”7. If this was NOT successful, please go to the next step.Running Recovery and Utility from the Bootable diskTo verify/change the boot-up priority (rather than booting-up from the hard drive oran external media drive), perform the following steps:1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.2. Insert the bootable disk into the drive tray.3. Highlight the CD/DVD option from the Boot menu, then press Enter .4. Click OK.5. Select CD/DVD boot mode: UEFI Mode, if applicable, and then press Enter .While the files are being loaded from the disk, the Fujitsu logo screen will appearfollowed by a progress bar at the bottom of the screen.Fujitsu 115
AppendixRecovery and Utility toolsNote: Recovery and Utility tools may not be available on your system dependingon the region from which the system was shipped.Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely youwill need to use this tool. If you should need to use this tool, perform the following steps:1. Press the Diagnostics Tool button to start the Diagnostics tool.2. Read the note, and then click OK.3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware DiagnosticsTool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.4. Click the Option button in the Tool menu to specify how many times the toolshould run diagnostics on each selected component.5. Press Execute to start the Diagnostics tool.6. After the execution is completed, the selected components are circled in red to indicate that theyhave been diagnosed and the result dialog window opens. Click Close to close the window.7. Click End to close the Diagnostics tool, and then click Yes to confirm the end of diagnostics session.Recovery tool: The Recovery tool contains two options:• Restore C Drive: Restore recovery image (only C: drive)• Restore Full Hard Drive: Restore recovery image (full hard drive).You can use these tools to restore the Recovery Image from the hidden partition, and perform a fullhard drive recovery. Please refer to instructions above for details on how to create a Recovery Image.Restore the Recovery Image from Hidden Partition1. Click [Restore C: drive] from Recovery and Utility tools2. The progress bar is followed by “Restore Recovery image (only C: drive)” screenconfirming that the Image will be restored to the C: drive. Click Next.3. Read the instruction screen and select Agree, then click Next.4. Click OK to acknowledge the warning message to restore recovery image to the C: drive.5. When the progress bar appears, wait for the process to complete.6. Click Finish when the process completes; the computer will restart to Windows.7. Follow the steps listed in the “Auto Installation support for software packagesfrom hidden partition” section.8. Download FSDM (Fujitsu Software Download Manager) from the support site and downloadall the software applicable to the model and OS using FSDM.9. Follow the steps listed in “Auto Installation support for software packagesdownloaded from support website” section.116 Fujitsu
AppendixRECOVER YOUR SYSTEM WHEN THE HARDDRIVEISNOTBOOTABLERestore the Recovery Image for Full Hard DriveFollow the steps in the “Recovering your Recovery Image using Recovery andUtility (for new hard drive or non-bootable hard drive)” section. You will need theBootable Disk and the Recovery Disk Set for this task.Utility tool: If applicable for your region, the Utility tool contains two options:Hard Disk Data Delete and Partition Creation.The Hard Disk Data Delete utility is used to delete all data on the hard diskand prevent the data from being reused.NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certainthat you want to erase your entire hard disk, including all partitions.To delete hard disk data:1. Click the Hard Disk Data Delete button. The progress bar appears, followed by the EULA screen.2. Agree to the EULA and click Next.3. Choose the hard disk from which the data should be deleted in the list of hard disks and click Next.The Partition Creation utility is used to change the C: and D: drive partition sizes.To run this utility: (This is not an option when using Windows 7.)1. Click the Partition Creation button.2. A progress bar appears, followed by the EULA screen. Agree to the EULA.3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK.4. Click Yes in the Partition Creation confirmation dialog.WARNING: It is highly recommended that you send your product to FujitsuService to replace a hard drive. A mistake could possibly destroy yourcomputer, your new hard drive or both.Fujitsu 117
AppendixRecovering Your Recovery Image Using Recovery and Utility(for new hard drive or non-bootable hard drive)If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.Note: You will need the Bootable disk and Recovery Image disk set for this recovery.1. Power on your system. When the Fujitsu logo appears on the screen, press the Enter key.2. Insert the bootable disk in your DVD drive, then click OK.3. Highlight the CD/DVD option from the Boot Menu and press Enter .4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press Enter .While the files are being loaded from the disk, the Fujitsu logo screen appearsfollowed by a progress bar at the bottom of the screen.5. Choose your language, if necessary.6. Three tool options appear: Diagnostics,Recovery and Utility.SelectRecovery.• For Windows 8.1: Select Restore full hard drive• For Windows 7: Select Restoring the Factory Image (full hard drive recovery)7. Click Next to confirm full hard drive restoration. All data on HDD will be deleted.8. Agree to EULA by selecting Agree option and clicking Next.9. Click Next on the Recovery Disk Check screen to verify that the bootabledisk has been inserted into the optical drive.10. The Checking for Recovery Disk screen appears followed by the prompt to insert thefirst disk. Click OK to continue. Repeat this step for all disks. After all recovery diskshave been checked and the check has been completed, click Next.11. Follow the prompt to reinsert the first recovery disk and click Next.12. Click OK when you receive the final warning informing you that all data on driveC will be lost. This starts the recovery process.13. Follow the prompts to insert the next recovery disks and click OK.14. After the copying of the image to the HDD completes the restore process iscomplete, click Finish to restart the system. The computer will restart automaticallyand then go through the first boot process.15. Follow the steps listed in “Auto Installation support for essential accesssoftware from backup location” section.16. Download FSDM (Fujitsu Software Download Manager) from support site and downloadall the software applicable to the model and OS using FSDM.17. Follow the steps listed in “Auto Installation support for essential accesssoftware downloaded from support website.118 Fujitsu
AppendixInstalling the Software after the Recovery Image is RestoredAuto-installation support for essential access softwarefrom hidden partitionThe below listed steps are applicable only in cases in which the recovery image restoreand hidden partition contents have not been wiped out.1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”.2. Double-click on “Fujitsu Software Auto Installer” desktop icon.3. Click Yes on User Account Control Dialog box. This will take some time toprocess the software packages. A message will be displayed during this time,“Please wait while the content is being processed”.4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.5. Then Fujitsu Software Auto Installer user interface will be launched providing abilityto auto-install the essential access software on the system.6. It is recommended that you install all the software in the listed order. You canSelect All, to install the software in the order listed.7. Click Install to start the installation.8. After installing all the selected drivers, Installation Results window will be displayed. Click OK.9. “You must restart the system for the settings to take effect. Do you wish toreboot now?” message appears. Select Yes.10. The system will now reboot.11. You can now connect to the internet and download FSDM (Fujitsu Software DownloadManager) from the support site and download all the software applicable to themodel and OS using FSDM if they are not downloaded yet.Fujitsu 119
AppendixAuto-installation support for essential access softwarefrom backup locationThe below listed steps are applicable in cases in which a backup copy was created asmentioned in the section “Creating a Backup of essential access software”.1. It is important to have the extracted Auto installer software package folderand Readme file in the same location as other software folders. Otherwiseauto-installation of the software will not be supported.2. Inside the Auto Installer software package, launch FjAutoinstall.exe as an Administrator.3. Click Yes on the User Account Control dialog box. This will take some time toprocess the software packages. A message will be displayed during this time stating,“Please wait while the content is being processed”.4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.5. The Fujitsu Software Auto Installer user interface will be launched providing abilityto auto install the essential access software on the system.6. It is recommended that you install all the software in the listed order. You can“Select All”, to install the software in the order listed.7. Click the Install button to start the installation.8. After installing all the selected drivers, Installation Results window is be displayed. Click OK.9. “You must restart the system for the settings to take effect. Do you wish toreboot now?” message appears. Select Yes.10. The system will now reboot.Auto Installation support for the software downloaded from support website1. Download FSDM (Fujitsu Software Download Manager) from the support site and download allthe drivers applicable to the model and OS using FSDM if they are not downloaded yet.2. When the software packages are downloaded from web, it is important to downloadthe Auto Installer Software package and the model/language- specific Readmefile if you prefer to auto install the software.3. It is important to have the extracted Auto Installer software package folderand Readme file in the same location as other software folders. Otherwiseauto-installation of the software will not be supported.4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.5. Click Yes on the User Account Control dialog box. This will take some time toprocess the software packages. A message will be displayed during this time stating“Please wait while the content is being processed”.6. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.7. The Fujitsu Software Auto Installer user interface will be launched providing the abilityto auto install the software downloaded from support site.8. It is recommended that you install all the software in the listed order. You canSelect All, to install the software in the order listed.9. Click the Install button to start the installation.10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.11. “You must restart the system for the settings to take effect. Do you wish toreboot now?” message appears. Select Yes.12. The system will now reboot.120 Fujitsu
AppendixDownloading Driver UpdatesTo ensure that you always have the most current driver updates related to your system,you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to viewand download a list of the most current drivers, utilities, and applications to determinewhether you have the latest versions. To download the FSDM Utility, go to the Support Site:"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".If you are planning on downgrading, upgrading or changing versions of your operating system duringthis process please see the User’s Guide for more information at "http://solutions.us.fujitsu.com".Fujitsu 121
IndexIndexAAC adapterconnecting 20Set up 19Acoustic warnings 91Anti-theft protection 70Audio connections 80BBattery 38, 55battery charge 39Caring for and maintaining 38charge level 38Charging 38Discharges too quickly 89see Rechargeable battery 38, 55Service life 38, 55battery charge meter 38before you travel 16BIOS Setup Utility, protecting with password 71calling 81exiting 83operation 82Settings 81Bluetooth, Safety notes 15Bonus Apps 22CCharging back-up battery 85Choose a location 19Cleaning 17Configuration, BIOS Setup Utility 81Configuring hardware 81Configuring system 81Connecting audio devices 80Connecting headphones 80Connecting microphone 80CrystalViewscreencleaning 17Ddark touchscreen 86Date not correct 85Declarations of conformity 102Display orientationselect 28DOC (INDUSTRY CANADA) NOTICES 99EEndingenergy saving mode 88EnergyEnergy consumption 39Energy saving 15Energy saving functions 39Error messages on the screen 91ErrorsAcoustic warnings 91Screen messages 91Ethernet LAN 45FFaultElimination 84Fingerprint sensor 67configuring 67First-time setup 18GGetting started 18GPS 45HHDMI port 77–78IImportant notes 14Incorrect time 85Information,safety 14InstructionsCleaning 17KKeyboardcleaning 17Keyboard docking stationConnecting a Tablet PC 53Ports 51LLandscape formatdisplay 28122 Fujitsu
IndexMMaking ready to use 20Memory cardhandling 40inserting 40removing 41Mobile operation 16Monitorconnection 78no image 87remains blank 87unstable image 87Monitor connectionsee VGA port 78NNotes 14disposal / recycling 99Energy saving 15touchscreen 27Transport 16OOperating systemactivating system protection 72cancel system protection 72Protecting with password 72PPackaging 18Palm vein sensor 68setting up 68Passwordchanging 71entering 71removing 72Password protection 70hard disk 73Pen 34Performance docking cradle 47Connecting a Tablet PC 48Portrait formatdisplay 28Ports 47Keyboard docking station 51Power saving 15Power-on Power-on indicator 25Printer does not print 89Problem solving 84RRechargeable batterysee battery 38, 55SSafety information 14Screen connectionsee VGA port 78Security functions 66SmartCard 74SystemLock 74Security LockAnti-theft protection 70using 70Service life, battery 38, 55Set upDevice 19Setupsee BIOS Setup Utility 81SlotMemory cards 40Status indicators 23Summer time 85Supervisor passwordchange 71entering 71removing 72Suspend/Resume button 25Switching off theTablet PC 26Switchingonforthefirst time 21SymbolsIndicators 23System settings, BIOS Setup Utility 81TTabletoperating 23Tablet PCcannot be started 88cleaning 17doesn’t work 88transporting 16Tablet, operation 23Tablet: Switching on 25Technical dataAC adapter 96–97The wireless connection to a networkdoes not work 89Time not correct 85Tips 84Fujitsu 123
IndexTouchpadcleaning 17Touchscreencleaning 17difficult to read 86notes 27reflected glare 86remains dark 86TPM 76TransportDamage during transportation 18Transportation 16Travel 16Troubleshooting 84Trusted Platform Module 76UUSB ports 79User passwordchange 71entering 71removing 72VVGA port 78WWebcam 37Winter time 85Wireless componentsSafety notes 15Wireless LANSafety notes 15Wrong date/time 85124 Fujitsu

Navigation menu