Fujitsu Client Computing WB0102 Tablet Computer User Manual Print Preview C DOCUME 1 julbec LOCALS 1 Temp aptcache ae2dgpn9 tf2dgvgw

Fujitsu Limited Tablet Computer Print Preview C DOCUME 1 julbec LOCALS 1 Temp aptcache ae2dgpn9 tf2dgvgw

TempConfidential_tentetive3_for_R727_FCC_UG_B5FK-7101-01ENZ0-00_en-us

SystemOperating ManualFUJITSU Tablet STYLISTIC R727
Contact address in North AmericaFUJITSU AMERICA INC.1250 East Arques Avenue, Sunnyvale,CA 94085-3470, U.S.A.Telephone: 800 831 3183 or 408 746 6000"http://solutions.us.fujitsu.com""http://solutions.us.fujitsu.com/contact"Have a question? Email us at: "AskFujitsu@us.fujitsu.com"Copyright©2016Fujitsu America, Inc. All rights reservedB5FK-7101-01ENZ0-00
FUJITSU Tablet STYLISTIC R727Operating ManualDeclarations of conformity 7Fujitsu Contact Information 8Ports and controls 10Important notes 13First-time setup of your device 18WorkingwiththeTabletPC 24Accessories for your Tablet PC(optional) 43Security functions 57Connecting external devices 62Settings in BIOS Setup Utility 68Troubleshooting and tips 71Technical data 80Manufacturer’s notes 86Declarations of conformity 89FCC Regulatory Information 90Canada, Industry Canada (IC) 93Appendix 95Index 105
Copyright and Trademark InformationFujitsu America, Incorporated has made every effort to ensure the accuracy and completenessof this document; however, as ongoing development efforts are continually improving thecapabilities of our products, we cannot guarantee the accuracy of the contents of thisdocument. We disclaim liability for errors, omissions, or future changes.Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limitedor its subsidiaries in the United States and other countries.Intel and Intel Core are trademarks or registered trademarks of Intel Corporation orits subsidiaries in the United States and other countries.Microsoft and Windows are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.Google is a trademark or registered trademark of Google Incorporated.Bluetooth is a trademark of Bluetooth SIG, Inc., USA.OmniPass is a trademark of Softex, Inc.Roxio is a trademark of Roxio, a division of Sonic Solutions.PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp.Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.
ContentsContentsDeclarationsofconformity ............................................................. 7Fujitsu Contact Information ............................................................ 8Notational conventions .................................................................. 9Portsandcontrols ..................................................................... 10Importantnotes ........................................................................ 13Safetyinstructions ...................................................................... 13Additional safety notes for devices with wireless components . . ............................. 14Protecting the displayscreen ............................................................ 14Energysaving .......................................................................... 14Energy saving under Windows ....................................................... 14Traveling with your TabletPC ............................................................ 15Beforeyoutravel ................................................................... 15Transporting the TabletPC ........................................................... 16Cleaning the TabletPC .................................................................. 16Further informationoncleaningtheTabletPC ......................................... 16Cleaning with disinfectantwipes .......................................................... 17First-timesetupofyourdevice ......................................................... 18Unpacking and checking the device . . . ................................................... 18Choose a location . ...................................................................... 19Settingupthedevice .................................................................... 20Connecting the AC adapter . . . ........................................................... 21Switching on the device for the firsttime .................................................. 22Installing Bonus Apps . . . . . ........................................................... 23Working with theTabletPC ............................................................ 24Status indicators ........................................................................ 24Switching theTabletPCon .............................................................. 25ProgrammingtheON/OFFbutton ..................................................... 25Switching theTabletPCoff .............................................................. 26Handwriting recognition .................................................................. 26Touchscreen ............................................................................ 27Select displayorientation(portraitorlandscapeformat) .................................... 28Using fingers ........................................................................... 28Calibrate the Dual Digitizer for finger-based operation of the device. ..................... 28Actions with one finger . . . . ........................................................... 29Actions with two fingers . . . ........................................................... 30Using the stylus (optional, configuration dependent) ........................................ 32Energy savingfunctionsofthestylus .................................................. 33Adjustingthestylus .................................................................. 33Calibratingthestylus ................................................................ 33Removingthestylusbattery .......................................................... 34Installingthestylusbattery ........................................................... 34Changingthepentip ................................................................ 35Volumerocker .......................................................................... 36Camera ................................................................................ 37Rechargeablebattery ................................................................... 37Chargingandmaintainingthebattery ................................................. 37Using the energy saving functions . ....................................................... 38Fujitsu 3
ContentsMemorycards .......................................................................... 39Supportedformats .................................................................. 39Insertingthememorycard ........................................................... 39Removingthememorycard .......................................................... 40Wireless LAN/Bluetooth/NFC wireless components (configuration dependent) . ............... 40Switching the wireless components on and off ......................................... 40ConfiguringWLANaccess ........................................................... 41FurtherinformationonWLANandBluetooth ........................................... 41NFC (Near Field Communication, configuration dependent) . . . .......................... 41EthernetandLAN(onlywithdockingcradle) .............................................. 41GPS ................................................................................... 42Accessories for your Tablet PC (optional) .............................................. 43Yourdockingcradle(optional) ............................................................ 44Cradle components . . ................................................................ 44Settingupthecradle ................................................................ 45Connecting the Tablet PC to the cradle . . ............................................. 46Disconnecting the Tablet PC from the cradle . ......................................... 47Magnetic keyboard (optional) ............................................................ 48Components of the magnetic keyboard . . . ............................................. 48Connecting the Tablet PC to the magnetic keyboard . . .................................. 49Separating the Tablet PC from the magnetic keyboard . . . .............................. 51Using the device with a docking cradle and magnetic keyboard (optional) . ................... 51Connecting the Tablet PC with magnetic keyboard to the docking cradle . ............... 51Separating the Tablet PC with magnetic keyboard from the docking cradle ............... 54Securityfunctions ..................................................................... 57Usingthesecuritylock(dockingcradleonly) .............................................. 57ConfiguringpasswordprotectioninBIOSSetupUtility ...................................... 57Protecting BIOS Setup Utility (supervisor password and user password) . . ............... 58Password protection for booting the operating system .................................. 59Passwordprotectionfortheharddisk ................................................. 60Trusted Platform Module - TPM (configuration dependent) .................................. 61EnablingTPM ....................................................................... 61DisablingTPM ...................................................................... 61Connectingexternaldevices ........................................................... 62Connecting an external monitor . . ........................................................ 62MiniDisplayPort .................................................................... 62DisplayPort(dockingcradleonly) .................................................... 63HDMIport(dockingcradleonly) ...................................................... 63Externalmonitorport(VGA)(dockingcradleonly) ...................................... 64Connecting USB devices ................................................................ 65USBportwithchargingfunction(AnytimeUSBcharge) ................................. 66HowtoremoveUSBdevicescorrectly ................................................ 66Connecting external audio devices . . . . . . ................................................. 67Connecting headphones or other audio output devices . . . .............................. 67Connecting a microphone or other audio input devices . . . .............................. 67Settings in BIOS Setup Utility . . ........................................................ 68StartingtheBIOSSetupUtility ........................................................... 68BIOS Setup Utility operation . ............................................................ 69ExitingBIOSSetupUtility ................................................................ 70Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . ................... 704Fujitsu
ContentsExit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . .............. 70Load Setup Defaults – load default values . ............................................ 70Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . .............. 70Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 70Savechangesandpoweroff ........................................................ 70Troubleshootingandtips .............................................................. 71Executingareset ....................................................................... 72Forcedshutdown .................................................................... 72Carryoutasystemorbatteryreset ................................................... 72Helpifproblemsoccur ................................................................... 72RecoveringyourFactoryImage .......................................................... 72TheTabletPC’sdateortimeisincorrect .................................................. 72Batterychargingindicatornotlit .......................................................... 73TheTabletPC’stouchscreenremainsdark ................................................ 73The display on the Tablet PC’s touchscreen is difficult to read. . ............................. 73Theexternalmonitorremainsblank ...................................................... 74Theexternalmonitorisblankortheimageisunstable ..................................... 74The cursor does not correctly follow the stylus movements . . . . ............................. 74Stylusinputnotworking ................................................................. 75TheTabletPCdoesnotstartafterswitchon ............................................... 75TheTabletPCstopsworking ............................................................. 75The printer does not print . . . . . ........................................................... 76The wireless connection to a network does not work . . . .................................... 76Thebatterydischargestooquickly ........................................................ 76Acousticwarning ........................................................................ 77Errormessagesonthescreen ........................................................... 78Technicaldata ......................................................................... 80TabletPC .............................................................................. 80WLAN specifications .................................................................... 82Screenresolutionsforintegratedscreenandexternalscreens .............................. 83Rechargeablebattery ................................................................... 84AC adapter 65 W for the Tablet PC and the docking cradle . . . . ............................. 84Dockingcradle(optional) ................................................................ 84Magnetic keyboard (optional) . ........................................................... 85Manufacturer’snotes .................................................................. 86Disposalandrecycling .................................................................. 86Recyclingyourbattery ............................................................... 86DOC(IndustryCANADA)Notices ..................................................... 86ENERGYSTARCompliance ......................................................... 88Declarationsofconformity ............................................................. 89FCCRegulatoryInformation ........................................................... 90Regulatory Notes and Statements . ....................................................... 90WirelessLAN,HealthandAuthorizationforuse ........................................ 90Regulatory Information/Disclaimers ................................................... 91FederalCommunicationsCommissionandIndustryCanadastatement: .................. 91FCCInterferenceStatement ......................................................... 91FCC Radio Frequency Exposure statement ............................................ 92Exportrestrictions ................................................................... 92Restrictionsconcernantl’exportation .................................................. 92Fujitsu 5
ContentsCanada,IndustryCanada(IC) .......................................................... 93Canadian Notice . ....................................................................... 93Avis pour le Canada . . . . . ................................................................ 94Appendix .............................................................................. 95Before Using the Optional Wireless LAN . ................................................. 95WirelessLANDevicesCoveredbythisDocument ...................................... 95CharacteristicsoftheWLANDevice .................................................. 95Wireless LAN Modes Using this Device . . ............................................. 96Deactivating/DisconnectingtheWLANDevice ......................................... 98ConfiguringtheWirelessLAN ............................................................ 98Connection to the network . . . ........................................................ 98TroubleshootingtheWLAN ........................................................... 99Image Backup and Recovery Procedures ................................................. 101Creatingarecoverydrive ............................................................ 101RecoveryoptionsinWindows10 ..................................................... 101Downloading driver updates . ............................................................ 104Index .................................................................................. 1056Fujitsu
Declarations of conformityDeclarations of conformityDECLARATION OF CONFORMITYaccordingtoFCCPart15Responsible Party Name: Fujitsu America, Inc.Address: 1250 E. Arques AvenueSunnyvale, CA 94085Telephone: (408) 746-6000Declares that product: Base Model Configuration: STYLISTIC R727Complies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC rules. Operations are subject to the following twoconditions: (1) This device may not cause harmful interference. (2) This device must accept anyinterference received, including interference that may cause undesired operation.In order to see the FCC information:With keyboard:1. Power on.2. Push F2 key.3. Push Enter key.Without keyboard:1. Power on by pushing the volume up key.2. Touch the Regulatory display menu.Fujitsu 7
Fujitsu Contact InformationFujitsu Contact InformationService and SupportYou can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• Product name• Product configuration number• Product serial number• Purchase date• Conditions under which the problem occurred• Any error messages that have occurred• Type of device connected, if anyFujitsu Shopping OnlinePlease go to "http://www.shopfujitsu.com/store/ ".Maintaining Latest ConfigurationTo ensure that you always have the most current driver updates related to your system, you shouldoccasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility isavailable from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers,utilities and applications to determine whether you have the latest versions. If you have a Windows7 or Windows 8 / 8.1 / 10 operating system, you will need to go to the Support Site to downloadthe FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".Limited WarrantyYour STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check theLimited Warranty Terms and Conditions Booklet that came with your Tablet PC.8Fujitsu
Fujitsu Contact InformationNotational conventionsPay particular attention to text marked with this symbol. Failure to observethis warning will endanger your life, will damage the device or lead to lossof data. The warranty will be invalidated if the device becomes defectivethrough failure to observe these warnings.Indicates important information which is required to use the device properly.►indicates an activity that must be performedindicates a resultThis style indicates data entered using the keyboard in a program dialogue or atthe command line, e.g. your password (Name123)oracommandusedtostart a program (start.exe)This style indicates information that is displayed on the screen by a program, e.g.:Installation is complete.This style indicates• terms and texts used in a software interface, e.g.: Click on Save.• names of programs or files, e.g. Windows or setup.exe."This style" indicates• Cross-references to another section, e.g. "Safety information"• cross-references to an external source, e.g. a web address: For moreinformation, go to "http://solutions.us.fujitsu.com/"• names of CDs, DVDs and titles or designations of other materials, e.g.:"CD/DVD Drivers & Utilities" or "Safety/Regulations" manualKey indicates a key on the keyboard, e.g: F10This style indicates terms and text that are emphasized or highlighted, e.g.: Do notswitch off the deviceFujitsu 9
Ports and controlsPorts and controlsThis chapter presents the individual hardware components of your device. It gives anoverview of the indicators and connections of the device. Please familiarize yourselfwith these items before you start to work with the device.Front61375421 = Touch screen2 = Ambient light sensor3=Camera4 = Mechanicalfixture for docking cradle5 = Windows button6 = Connector rail for magnetic keyboard7 = Docking port for the docking cradle10 Fujitsu
Ports and controlsLeft side1 2 3 87690°451 = Combined headphones andmicrophone port2 = USB port 3.0 with charging function(Anytime USB charge)3 = Mini Display Port4 = Power-on indicator5 = Battery charging indicator6 = DC input connector (DC IN)7 = Tablet stand8 = Memory card slot (under tablet stand,Right side1 321 = Volume Down Button2 = Volume Up Button3 = ON/OFF buttonFujitsu 119protected by additional cover)9 = SIM card slot (under tablet stand, protected by additional cover) Note) Even though existing SIM slot, this product doesn't support Wireless-WAN function in U.S.A and Canada.
Ports and controlsRear4213351 = Tablet stand2 = NFC (Near Field Communication,depending on configuration)3 = Speaker4 = Camera5 = Access to reset button12 Fujitsu
Important notesImportant notesImportantnotesNotesThis chapter contains essential safety information which must be followed when workingwith your Tablet PC. The other notes provide useful information about your Tablet PC.Safety instructionsSafetyinformationInform ation,Please follow the safety notes provided in the "Safety/Regulations" manualas well as the safety notes given below.Please pay special attention to the sections in the manual markedwith the symbol on the left.When connecting and disconnecting cables, observe the relevantnotes in this operating manual.Read the information on the ambient conditions in the "Technical data", Page 80 chapterand the information in the "First-time setup of your device", Page 18 chapter beforepreparing your Tablet PC for use and switching it on for the first time.When cleaning the device, please observe the relevant notes in thesection "Cleaning the Tablet PC", Page 16.Pay attention to the additional safety notes for devices with wireless componentsprovided in the "Safety/Regulations" manual.When handling this device, you come into contact with lead, a chemical which inCalifornia is held to be a possible cause of birth defects and other damage to fertility.Wash your hands after using the device.This Tablet PC complies with the relevant safety regulations for data processing equipment. Ifyou have questions as to whether you can set up the Tablet PC in the intended environment,please contact your sales outlet or our hotline/service desk.Fujitsu 13
Important notesAdditional safety notes for devices withwireless componentsWirelesscom ponentsWirelessLANBluetooth,SafetynotesIf a wireless component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must besure to observe the following safety precautions when using your Tablet PC:• Switch off the wireless components when you are in an aircraft or driving in a car.• Switch off the wireless components when you are in a hospital, an operatingroom or near a medical electronics system. The transmitted radio wavescan impair the operation of medical devices.• Switch off the wireless components, when you let the device get near flammablegases or into hazardous environments (e.g. gas station, paint stores), as thetransmitted radio waves can cause an explosion or a fire.For further information on how to switch the wireless components on and off, referto section "Switching the wireless components on and off", Page 40.Protecting the display screenDo not pour liquids on the system or wash it with a heavily soaked cloth. Do not placeitems on the top of the monitor in order to prevent it from being damaged.During normal use of the device, small particles from the environmentcan become embedded in the stylus tip and scratch the screen. Thewarranty does not cover a scratched screen.Energy savingNotesEnergyPowersavingIf you will not be using your Tablet PC, switch it off. Switch off any connected external devices whenthey are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you dothis, you will be able to work longer with the Tablet PC before having to recharge the battery.The energy efficiency is increased and environmental pollution is reduced.You save money and help protect the environment.Energy saving under Windows►Make use of the available energy-saving functions as described in chapter"Using the energy saving functions", Page 38.14 Fujitsu
Important notesTraveling with your Tablet PCMobileoperationNotesTranspor tationTabletPCPlease follow the instructions below when traveling with your Tablet PC.Before you travel►Back up important data stored on your hard disk.beforeyou travelTravel►Switch off the wireless component for data security reasons. With data trafficviaawirelessconnection, it is also possible for unauthorized third parties to receive data.Information on activating data encryption is provided in the documentationfor your wireless component.►If you want to use your Tablet PC during a flight, ask the flight attendants to seeit is safe to use it.When traveling in other countries►If you are traveling abroad, check that the AC adapter can be operated with thelocal AC voltage. If this is not the case, obtain the appropriate AC adapter foryour Tablet PC. Do not use any other voltage converter!►Check whether the local AC voltage and the AC cable are compatible. If this is notthe case, buy an AC cable that suits the local conditions.►Enquire with the appropriate government office of the country you will be traveling in as towhether you may there operate the wireless component integrated in your Tablet PC.►Take the necessary travel adapters with you when traveling abroad. Check in the followingtable for which travel adapters you will need, or ask your travel organizer.Power connection Travel destinationUnited States, Canada, Mexico, parts of LatinAmerica, Japan, Korea, Philippines, TaiwanRussia and the Commonwealth of IndependentStates (CIS), much of Europe, parts of LatinAmerica, the Middle East, parts of Africa, HongKong, India, much of south-east AsiaUnited Kingdom, Ireland, Malaya, Singapore,parts of AfricaChina, Australia, New ZealandFujitsu 15
Important notesTransporting the Tablet PCProtect the Tablet PC from severe shocks and extreme temperatures(e.g. direct sunlight in a car).• Do not transport your Tablet PC while it is turned on.• Carry your Tablet PC with you while traveling. Do not check it in as baggage.• Never put your Tablet PC through a metal detector. Have it hand-inspected bysecurity personnel. You can however put your Tablet PC through a properlytuned X-ray machine. To avoid problems, place it close to the entrance ofthe machine and remove it as soon as possible or have it hand-inspected bysecurity personnel. Security officials may require you to turn your Tablet PCon. So make sure you have a charged battery on hand for this.►Switch the Tablet PC off.►Unplug the AC plug of the AC adapter and all external devices from the power outlets.►Disconnect the AC adapter cable and the data cables for all external devices.►To protect against damaging jolts and bumps, use a suitable Tablet PCcarrying case to transport your Tablet PC.Cleaning the Tablet PC• Use of incorrect cleaners can result in optical impairment of the LCD and / ordamage to the computer. Always refer to the cleaner manufacturer’s guidelines andmaterial safety data sheets for proper handling and use of the products.• Never use ammonia, acidic, or alkaline cleaners or organic chemicalssuch as paint thinner, acetone or kerosene. It may damage surfacefinishes and the coating of the LCD screen.• Never use compressed air for cleaning your computer.• If your Tablet PC has a Smart Card slot, be very careful to avoid anyliquid entering the slot as this can damage the unit.Further information on cleaning the Tablet PCThe Tablet PC does not float.If the Tablet PC is exposed to water or other liquids with its connections open, liquidcan penetrate the Tablet PC and cause a malfunction. Do not continue to use theTablet PC. Switch it off and contact our hotline / our service desk (see enclosed list ofservice desks or visit our website at: "http://www.fujitsu.com/us/support/").16 Fujitsu
Important notesCleaning with disinfectant wipesThere are many ways of disinfecting surfaces. The following disinfectant wipeshave been tested successfully with the Tablet PC:• MG Chemicals Multipurpose Alcohol Wipes (alcohol-based)• PROSAT® Sterile™ PS-911EB/EtOH Life Sciences Wipes (alcohol-based)• Clorox® Healthcare Bleach Germicidal Wipes (without alcohol)Remember, if your Tablet PC is configured with the Smart Card shell, it does nothave a cover to close the port and liquid could enter and damage the device. Takeextra precautions when cleaning around the Smart Card reader.For proper use of disinfectant wipes, please read the manufacturer’s instructions.Before cleaning, please test the disinfectant wipe on a small area of the TabletPC. Some medical disinfectant wipes may leave residue on the Tablet PC whichis difficult to remove again, or they may dry out quickly. Therefore dispose ofthe wipes after one single use and do not reuse them.Fujitsu 17
First-time setup of your deviceFirst-time setup of your deviceFirst- timese tupGettingstartedPlease read the chapter "Important notes", Page 13.If your device is equipped with a Windows operating system, the necessaryhardware drivers and supplied software are already pre-installed.Beforeswitchingitonforthefirst time, connect the device to the AC voltage usingthe AC adapter, see "Connecting the AC adapter", Page 21. The AC adapter mustremain connected during the whole of the installation process.A system test is performed when your device is first switched on. Various messagescan appear. The display may remain dark for a short time or may flicker.Please follow the instructions on the screen.NEVER switch off your device during the first-time setup process.The battery must be charged if you want to operate your device using the battery.When used on the move, the built-in battery provides the device with the necessary power. Youcan increase the operating time by using the available energy-saving functions.For instructions on how to connect external devices (e.g. mouse, printer) to your TabletPC, please refer to the operating manual for your device.Unpacking and checking the deviceIf you find that damage has occurred during transport, please notifyyour local sales outlet immediately!►Unpack all the individual parts.PackagingTransport►Check your device for any visible damage which may have occurred during transportation.You may need to reuse the packaging in the future, for example ifyou need to ship your device.18 Fujitsu
First-time setup of your deviceChoosealocationChoosealoc ationSetupAC adapterChoose a suitable location for the device before setting it up. In doingso, please follow these instructions:• Never place the device or the AC adapter on a heat-sensitive surface.The surface could be damaged as a result.• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,bed). This can result in damage caused by overheating.• The back of the device heats up during normal operation. Prolonged contactwith skin can become unpleasant or even result in burns.• Place the device on a stable, flat, non-slippery surface. Please note that therubber feet of the device may mark certain types of delicate surfaces.• Keep other objects at least 100 mm / 4 inches away from the deviceand its AC adapter to ensure adequate ventilation.• Do not expose the device to extreme environmental conditions. Protectthe device against dust, humidity and heat.Fujitsu 19
First-time setup of your deviceSetting up the deviceYou can operate the device in an upright position on an even surface using the built-in tablet stand.Make sure that the device is standing safe and securely and be careful that it does nottip over. Otherwise the device may be damaged, particularly the touch screen.Open the tablet stand to a maximum angle of 90 degrees. Otherwisethe joint of the tablet stand will be damaged.90° max.►Open the tablet stand in the direction of the arrow to the desired opening angle.►Set the device in its place.20 Fujitsu
First-time setup of your deviceConnecting the AC adapterMakingreadytouseACadapterObserve the safety notes in the enclosed "Safety/Regulations" manual.The supplied AC cable conforms to the requirements of the country in whichyou purchased your device. Make sure that the AC cable is approved foruse in the country in which you intend to use it.312►Connect the AC cable (1) to the AC adapter.►Plug the AC cable (2) into a power outlet.►Connect the AC adapter cable (3) to theDC jack (DC IN) of the device.Fujitsu 21
First-time setup of your deviceSwitching on the device for the first timeSwitchingonforthefirstt imeTo make it easier to use your device for the first time, the operating systemis pre-installed on the hard disk.12►Press the ON/OFF button (1) for about one second to switch the device on.The power-on indicator (2) lights up whenever the system is switched on.►During the installation process, follow the on-screen instructions.You can find information and help on the Windows operating systemfunctions online at "http://windows.microsoft.com".22 Fujitsu
First-time setup of your deviceInstalling Bonus AppsBonusAppsAfter you have started your system the first time, you will see a Bonus Apps icon on your desktop.►Click on the icon to see which additional applications are available for you to install.Applications that are already installed appear in grey, those that areavailable for installation appear in blue.►Select the applications you wish to install by selecting the checkbox adjacent to your selection.or►Click Select All if you would like to install all available applications.►To confirm your selection, click Install.Note that in some cases (depending upon which application was selected forinstallation) after installation completes, the system will prompt you to reboot.There are also cases in which if multiple applications are selected to installbut one of them needs a reboot, the system will reboot and continueinstalling the rest of the selected applications.Fujitsu 23
Working with the Tablet PCWorking with the Tablet PCTablet,operationTabletThis chapter describes the basics for operating your Tablet PC. You can find instructionson how to connect external devices (e.g. mouse, flash storage) to the Tablet PC inthe chapter "Connecting external devices", Page 62.Please refer to the notes in the chapter "Important notes", Page 13.Status indicatorsStatusindicatorsSymbolsThe status indicators (1, 2) provide information about the status of the powersupply and of the rechargeable battery.12No. Status indicator Description1Power-on indicator• The indicator lights up white: The tablet PC isswitched on.• The indicator flashes: The Tablet PC is in sleep mode(Save-to-RAM).• The indicator is not lit: The Tablet PC is switched offor in Save-to-Disk mode.2Battery charging indicatorPlease note: If the mains adapter is connected when thestate of charge of the battery is more than 90%, chargingwill not be started. When the state of charge of the batteryis less than 90%, the battery will be charged to 100% assoon as the mains adapter is connected.• The indicator is lit orange: The battery is beingcharged.• The indicator flashes orange: An error has occurred.• The indicator is not lit:The battery is not beingcharged (the battery is already more than 90%charged or the mains adapter is not connected.)24 Fujitsu
Working with the Tablet PCSwitching the Tablet PC onTablet:SwitchingonPower-onPower-onindicatorSuspend/Resume button12►Press the ON/OFF button (1) for about one second to switch the device on.The power-on indicator (2) lights up whenever the system is switched on.Programming the ON/OFF buttonYou can program the ON/OFF button:Operating system MenuWindows 10 Control Panel - Hardware and Sound - EnergyOptionsIf you have assigned a password, you must enter this when requested todo so, in order to start the operating system. Detailed information can befound in the chapter "Security functions", Page 57.Fujitsu 25
Working with the Tablet PCSwitching the Tablet PC offBack up your data and close all applications before you switch off yourdevice. Otherwise data might be lost.►Shut down the operating system correctly.Switchingoffthe►If the Tablet PC does not switch itself off automatically, press the ON/OFFbutton for approx. five seconds.Handwriting recognitionFor detailed information on handwriting recognition, see the documentation for your operating system.At present, handwriting recognition under Windows supports the following languages:English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.Under Windows you can set the required language under Control Panel –Time, Language and Region – Language.26 Fujitsu
Working with the Tablet PCTouchscreenTou ch s c re e nNotesInformation on screen resolution can be found in the section "Screen resolutionsfor integrated screen and external screens", Page 83.Background lightingLCD screens are operated with background lighting. The luminosity of the backgroundlighting can decrease over the period of use of the Tablet PC. However, youcan set the brightness of your screen yourself.Ambient light sensorIf your Tablet PC was shipped with the Windows operating system, the screen brightness isregulated by means of the ambient light sensor and depending on the respective light conditions.This results in optimum readability and longer battery life at the same time.If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is deactivated. Tochange the ambient light sensor settings, select Control Panel - System and Security - Power Options -Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..Select On to activate the adaptive brightness setting with the help of the ambient light sensor.Synchronizing the display on the touchscreen and an external monitorIn Windows 10 you can proceed as follows to set the output type:►Wipe your finger over the screen starting from the right-hand edge.►Select All Settings.►Look for the keyword "project".►Select the required function.Fujitsu 27
Working with the Tablet PCSelect display orientation (portrait orlandscape format)Landscapeform atPortraitformatDisplayorientationYou can choose to use either portrait or landscape orientation for the display, or whether thedisplay orientation should automatically adapt to the orientation of the Tablet PC.The automatic adaptation of the display orientation is disabled whilea magnetic keyboard is attached.You can change these settings under Control Panel - Hardware and Sound- Windows Mobility Center / Rotate screen.In the settings thereareprofiles saved for operation with different screen orientations.These profiles have preset standard configurations that can be modified as desired.These settings do not just affect the screen settings on the Tablet PC, butalso on external monitors that are connected.Using fingersYou can execute certain commands by using your finger tip on the touchscreen of your device.Alternatively, everything which you can select or activate using your fingertip can also be selected or activated using the stylus.Calibrate the Dual Digitizer for finger-basedoperation of the device.Before the first finger-based operation, you must calibrate your Tablet PC via theoperating system, so that it recognizes your fingertips as accurately as possible.As soon as you notice that the accuracy is becoming worse, youmust recalibrate the device.Please note: There are separate calibration programs available for calibratingthe stylus and for calibrating finger-based operation. Do not use the calibrationtool for the stylus to calibrate finger-based operation.Operating system MenuWindows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.28 Fujitsu
Working with the Tablet PCActions with one fingerAction DescriptionSelecting objects (click with the left mousebutton)►Tap once briefly with the finger on the object.Starting programs (double-click with the leftmouse button)►Use one finger to tap twice in quicksuccession on the program symbol.Moving objects/windows (while holding the leftmouse button pressed, drag & drop)►Place your finger on the object/window,keep your fingertip pressed againstthe touchscreen and move the desiredobject/window.Opening a context menu (click with the rightmouse button)►Tap your finger on the desired item.Keep your fingertip pressed against thetouchscreen.The context menu appears.Moving the cursor ►Position one finger on the touchscreen andmove your fingers in the desired direction.Fujitsu 29
Working with the Tablet PCActions with two fingersAction DescriptionScrolling►Place two fingers on the touchscreen.►Move the fingers up to scroll up.or►Move the fingers down to scroll down.Rotating►Position your thumb on the touchscreen androtate the image clockwise or anticlockwiseusing your index finger.30 Fujitsu
Working with the Tablet PCAction DescriptionIncrease or decrease zoom►Put two fingers on the touchscreen andmove them apart to increase the size of thezoom.or►Put two fingers on the touchscreen andmove them together to decrease the sizeof the zoom/view.Lock context-sensitive menus ►Use two fingers to tap twice in quicksuccession on the touchscreen.Fujitsu 31
Working with the Tablet PCUsing the stylus (optional, configuration dependent)Pen1231 = stylus tip2 = stylus button (eraser)3 = stylus button (right mouse button, styluswake-up)You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and tonavigate through the programs. Programs that support handwriting recognition also allow you towrite directly on the screen with the stylus. You can also use the stylus as a drawing tool.Use only the stylus that was provided with your Tablet PC. Do not use any other pointedobject as a substitute, that was not specially designed for your Tablet PC. Replacethe stylus tip if it is worn. The warranty does not cover a scratched screen.While writing, take care that you do not scratch the surface of thedisplay (e.g. with a wristwatch or bracelet).The stylus of the Tablet PC is an electronic instrument that can be damagedif used improperly. Handle the stylus with care.Our recommendations for proper handling of the stylus are as follows:• Do not gesture with the stylus.• Do not use the stylus as a pointer.• Do not use the stylus on surfaces other than the screen of the Tablet PC.• Do not try to turn the grip of the stylus. The grip is used to put thestylus into its slot or to take it out of its slot.• Never store the stylus with its weight on the tip (e.g. with the tip down in a styluscontainer). If the stylus is stored with the tip pointing down, this may have anadverse effect on the stylus mechanism (particularly in high temperatures). In thiscase, the stylus tip may react as though it is constantly being pressed down. Toavoid damage, the stylus should be stored in the slot when not in use.The stylus can be influenced by electromagnetic fields (cursor quivers orjumps). There may be a few areas on the screen where the cursor quiversslightly in spite of pressing the stylus down firmly.The screen responds to entries made with the tip of the finger or the stylus when thetip of the finger or the stylus directly touches the screen.You can use the stylus to perform almost all functions for which you would otherwise use a mouse.32 Fujitsu
Working with the Tablet PCAction Mouse StylusSelecting menuitems Click with the left mouse button.Tap on the menu entry with the tip ofthe stylus.Starting programs Double-click with the left mousebutton. Tap on the program symbol twice inrapid succession using the stylus tip.Moving an objector window Drag with the left mouse buttonpressed. Place the stylus tip directly on theobject or window. Keep the stylus tipheld against the screen. Drag thedesired object or window.Opening a contextmenu Click with the right mouse button. Tap on the desired element with thestylus and keep the stylus pressedagainst the screen.Moving the cursor Move the mouse Place the tip of the stylus directly onthe screen.Energy saving functions of the stylusIn order to save energy, the stylus automatically enters suspend mode after 5 minutesof inactivity (lower energy consumption than in active mode), and sleep mode after 10minutes (lower energy consumption than in suspend mode).You can set the stylus to active mode again using the lower button on the stylus.Adjusting the stylusOperating system MenuWindows 10 Under System Control - Hardware and Sound - Pen and Touch you can makevarious settings for the stylus.Calibrating the stylusBefore first use with the stylus, you must calibrate your Tablet PC via the operatingsystem, so that it recognizes the stylus as accurately as possible.You should also always repeat the calibration if the co-ordination between thestylus and the cursor movement deteriorates.Operating system MenuWindows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.Fujitsu 33
Working with the Tablet PCRemoving the stylus batteryThe stylus contains one AAAA battery.1231►Turn the cap of the stylus in the direction ofthe arrow (1) and lift it off the stylus (2).►Remove the battery from the stylus cap (3).Installing the stylus battery1213►Insert the new battery into the stylus cap (1).►Place the stylus cap on the stylus (2) andscrew it down in the direction of the arrow (3).34 Fujitsu
Working with the Tablet PCChanging the pen tipWith use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.A damaged or worn tip may not move freely, causing unpredictable results when using the pen.If these problems appear with your pen, you should change the pen tip.►Pull the pen tip from the pen.►Replace the pen tip with one of thereplacement tips that were suppliedyour pen. Insert the pointed end of thepen tip into the barrel and push it ingently until it is in place.Do not continue to use a tip which is worn or damaged.Fujitsu 35
Working with the Tablet PCVolume rockerIn addition to the ON/OFF button (3), your Tablet PC is also equipped with a volume rocker (1, 2).1 32No. Description Functions1 Volume down button Decrease the volume.Keeping the volume down button pressed after turning onthe Tablet PC, the Boot Menu is started (this correspondsto the F12 key on a keyboard).During PXE boot thevolumedownbuttonalsocorrespondsto the F12 key on a keyboard.2 Volume up button Increase the volume.Keeping the volume up button pressed after turning on theTablet PC, the BIOS Setup is started (this corresponds tothe F2 keyonakeyboard).3ON/OFF button Switch the device on or off36 Fujitsu
Working with the Tablet PCCameraCameraYour device has two cameras: one on the front of the device and one on the rear.The camera has its own status indicator. The indicator lights up when the camera is active.Depending on the software used, you can use your camera to take pictures,record video clips or take part in web chats.• The picture quality depends on the lighting conditions and the software being used.• You can only use the camera with a particular application (e.g. an Internet telephonyprogram or a video conferencing program which supports cameras).• The support of the Tablet PC must not shake while the camera is being used.• The camera automatically adjusts itself to the current light level. For this reason,the touch screen may flicker while the light level is adjusted.Further information on the use of the camera and additional settings for it canbe found in the help function of the program using the camera.Rechargeable batteryBatteryBatteryServicelife,batteryRechargeablebatteryBatteryThe built-in battery provides the Tablet PC with the necessary power for use on the move.You can increase the service life of the battery by caring for the battery properly. Theaverage battery service life is around 500 charge/discharge cycles.You can extend the battery service life by taking advantage of the available energy-saving functions.Charging and maintaining the batteryBatteryBatteryThe Tablet PC battery can only be charged when the ambient temperature isbetween 5°C / 41 °F and max. 35°C / 95°F.You can charge the battery by connecting the Tablet PC to the AC adapter(see "Connecting the AC adapter", Page 21).If the AC adapter is connected when the state of charge of the battery is more than 90%,charging will not be started. When the state of charge of the battery is less than 90%, thebattery will be charged to 100% as soon as the AC adapter is connected.If the battery is running low you will hear a warning alarm. If you do not connect the AC adapterwithin five minutes of hearing the warning alarm, your Tablet PC will switch off automatically.Monitoring the battery state of chargeBatterybatterychargemeterA battery symbol for monitoring the battery capacity is displayed in the system bar /status indicator. The battery symbol shows you the battery charge.Fujitsu 37
Working with the Tablet PCUsing the energy saving functionsEnergyEnergyBatteryThe Tablet PC uses less power when the energy saving features are enabled. You will thenbe able to work longer when using the battery before having to recharge it.The energy efficiency is increased and environmental pollution is reduced.By choosing the best power options, you can make significant savings andat the same time help protect the environment.►Set the energy saving functions in your Control Panel.The recommended settings for the Windows energy saving functions are predefined as "FujitsuComputer EcoSettings" in the Power Options of the Control Panel and can be displayed there.When the Tablet PC is in a power-saving mode, you must remember the following:During power-saving mode, open data is held in main memory orin a swap file on the hard disk.Never switch off the Tablet PC while it is in a power-saving mode. If the built-in batteryis nearly flat, close all open files and do not go into power-saving mode.If you do not intend to use your Tablet PC for a long period of time:►Exit the power-saving mode if necessary by touching the screen or by switching the TabletPC on.►Close all opened programs and completely shut down the Tablet PC.38 Fujitsu
Working with the Tablet PCMemory cardsSlotYour Tablet PC is equipped with an integrated storage card reader. Use storagecards to enlarge the storage of your Tablet PC.Follow the manufacturer’s instructions when handling the memory cards.MemorycardSupported formatsThe following formats are supported:• Micro Secure Digital (microSDTM Card)•microSDHC•microSDXCInserting the memory card2a13►Fold out the tablet stand (1).►Open the slot cover (2).►Carefully push the memory card into the slot (a) in the direction of the arrow (3) until youfeel the memory card engage. The label area must be facing downward. Do not applyany force, otherwise the delicate contact surfaces could be damaged.Memorycard►Close the slot cover again.Fujitsu 39
Working with the Tablet PCRemoving the memory cardMemorycardTo avoid any loss of data, always follow the correct procedure for removing thecard (see the documentation for your operating system).2a31►Fold out the tablet stand (1).►Open the slot cover (2).►Press the edge of the memory card so that the memory card jumps slightly out of the slot (a).►Pull the memory card out of the slot (a) in the direction of the arrow (3).►Close the slot cover again.Wireless LAN/Bluetooth/NFC wireless components(configuration dependent)The installation of wireless components not approved by Fujitsu willinvalidate the certifications issued for this device.Switching the wireless components on and offThe wireless components are switched on and off using the appropriatefunctions of the operating system.►To switch wireless components on and off individually, select Settings – Network & Internet.40 Fujitsu
Working with the Tablet PCConfiguring WLAN access• Requirement: A WLAN is available and you have the necessary access data to hand.Information on configuring WLAN access can be found in thedocumentation for your operating system.Further information on WLAN and BluetoothFor further information about WLAN or Bluetooth, please refer to theappendix of this Operating Manual.For WLAN specifications, see chapter "WLAN specifications", Page 82.NFC (Near Field Communication, configuration dependent)Depending on the configuration chosen, your Tablet PC may be equipped with anintegrated NFC chip. Near Field Communication is used for contactless exchange ofdata via radio over short distances (a few centimeters).Ethernet and LAN (only with docking cradle)EthernetLANThe internal network module of your Tablet PC supports Ethernet LAN. You can use it toestablish a connection to a local network (LAN = Local Area Network).21►Connect the network cable to the LANport of the docking cradle (1).►Connect the network cable to yournetwork connection (2).Your network administrator can help you to configure and use the LAN connections.The network cable is not included in the delivery scope. This type ofcable can be obtained from a specialist dealer.Fujitsu 41
Working with the Tablet PCGPSGPSWhether your device has this function depends on the chosen device configuration.42 Fujitsu
Accessories for your Tablet PC (optional)Accessories for your Tablet PC (optional)The following accessories are available for your Tablet PC:• Docking cradle for charging the Tablet PC and with additional ports• Magnetic keyboard with cover function• Conversion adapter: MiniDP - VGA, MiniDP - HDMI and USB - LAN• Notebook mouseThe following sections provide more information on handling the accessories.Fujitsu 43
Accessories for your Tablet PC (optional)Your docking cradle (optional)Your docking cradle is a device that also allows you to quickly connect your Tablet PCto your peripherals such as a display, keyboard, mouse, etc. You only need to dockthe Tablet PC to be able to work with your peripheral devices.Cradle componentsPortsPortsCradle21310467891151 = Docking port2 = USB port (USB 3.0)3 = USB port (USB 3.0)4 = Microphone port5 = Headphones port6 = VGA monitor port7 = HDMI port8 = Display Port9 = LAN port10 = Security Lock device11 = DC jack socket (DC IN)Information on screen resolution can be found in the section "Screen resolutionsfor integrated screen and external screens", Page 83.44 Fujitsu
Accessories for your Tablet PC (optional)SettingupthecradleSelect a suitable location for the cradle before setting it up. In doingso, please follow these instructions:• Placethecradleonaflat, stable, non-slippery surface.• Never place the cradle or the AC adapter on a heat-sensitive surface.• Do not expose the cradle to extreme environmental conditions.• Protect the cradle from dust, moisture and heat.Fujitsu 45
Accessories for your Tablet PC (optional)Connecting the Tablet PC to the cradleIt is possible to connect the Tablet PC to the cradle while it is running.Disconnect the AC adapter from the Tablet PC before connecting theTablet PC to the docking cradle.When the Tablet PC is connected to the cradle, you must connectthe AC adapter to the cradle.Cradle►Remove the AC plug of the AC adapter from the power outlet.►Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.►Fold in the tablet stand so that it lies flat on the rear of the Tablet PC.4123►Position the Tablet PC so that it lies against the storage surface of the cradle.►Push the Tablet PC on to the docking cradle in the direction of the arrow (1)until you feel it engage on the connector.►Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2).►Connect the AC cable to the AC adapter (3).►Plug the AC cable into the power outlet (4).46 Fujitsu
Accessories for your Tablet PC (optional)Disconnecting the Tablet PC from the cradleIt is possible to separate the Tablet PC from the cradle while it is running.1►While holding the lower area of the docking cradle, lift the Tablet PC in the directionof the arrow and away from the docking cradle (1).Fujitsu 47
Accessories for your Tablet PC (optional)Magnetic keyboard (optional)The magnetic keyboard is an optimized device for the convenient input of text. Itonly needs to be docked with the Tablet PC.Components of the magnetic keyboardMagnetickeyboar dPorts23411 = Docking port for the Tablet PC2 = Num Lock indicator (to switch virtualnumeric keypad on and off)3 = Caps Lock indicator (to switchcapitalization function on and off)4 = Scroll Lock indicator (function dependenton the application program)48 Fujitsu
Accessories for your Tablet PC (optional)Connecting the Tablet PC to the magnetic keyboardMagnetickeyboar d290° max.1►Fold out the tablet stand (1).Open the tablet stand to a maximum angle of 90 degrees. Otherwisethe joint of the tablet stand will be damaged.►Position the Tablet PC so that the docking ports of the Tablet PC and the magnetic keyboardapproach in the direction of the arrow (2) and the magnetic connection clicks into place.Fujitsu 49
Accessories for your Tablet PC (optional)534►Connect the AC adapter cable to the DC input connector (DC IN) of the Tablet PC (3).►Connect the power cable to the AC adapter (4).►Plug the power cable into the power outlet (5).50 Fujitsu
Accessories for your Tablet PC (optional)Separating the Tablet PC from the magnetic keyboardIt is possible to separate the Tablet PC from the magnetic keyboard while it is running.21►While holding the lower area of the magnetic keyboard, lift the Tablet PC away fromthe magnetic keyboard in the direction of the arrow (1).►Fold in the tablet stand (2) again.Using the device with a docking cradle andmagnetic keyboard (optional)If you have both a docking cradle and a magnetic keyboard, you can also usethe device with these two accessory components.Connecting the Tablet PC with magnetic keyboardto the docking cradleThe magnetic keyboard must be connected to the Tablet PC before youconnect the Tablet PC to the docking cradle.It is possible to connect the Tablet PC to the cradle while it is running.Disconnect the AC adapter from the Tablet PC before connecting theTablet PC to the docking cradle.Fujitsu 51
Accessories for your Tablet PC (optional)When the Tablet PC is connected to the cradle, you must connectthe AC adapter to the cradle.Cradle►Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.12►Connect the Tablet PC with the magnetic keyboard (1) as described in the section"Connecting the Tablet PC to the magnetic keyboard", Page 49.►Fold together the Tablet PC and the magnetic keyboard (2).52 Fujitsu
Accessories for your Tablet PC (optional)3►Position the Tablet PC with the magnetic keyboard so that it lies on thesurface of the tray on the docking cradle.►Push the Tablet PC on to the docking cradle in the direction of the arrow (3)until you feel it engage on the connector.Fujitsu 53
Accessories for your Tablet PC (optional)7564►Fold down the magnetic keyboard in the direction of the arrow (4).►Plug the AC adapter cable into the DC input connector (DC IN) on the docking cradle (5).►Connect the power cable to the AC adapter (6).►Plug the power cable into the power outlet (7).Separating the Tablet PC with magnetic keyboardfrom the docking cradleIt is possible to separate the Tablet PC from the docking cradle during operation:You must first separate the Tablet PC from the docking cradle before you canremove the keyboard. Attempting to remove the magnetic keyboard while the TabletPC is in the docking cradle can damage the magnetic keyboard.54 Fujitsu
Accessories for your Tablet PC (optional)1►Fold the magnetic keyboard in the direction of the arrow (1).2►While holding the lower part of the docking cradle, lift the Tablet PC with themagnetic keyboard in the direction of the arrow (2).Fujitsu 55
Accessories for your Tablet PC (optional)43►Fold the Tablet PC in the direction of the arrow (3).►While holding the lower area of the magnetic keyboard, lift the Tablet PC away fromthe magnetic keyboard in the direction of the arrow (4).56 Fujitsu
Security functionsSecurity functionsSecurityfunctionsYour Tablet PC has several security features that you can use to secure your systemand your personal data from unauthorized access.This chapter explains how to use these functions, and what the benefits are.Please remember that in some cases, for example, forgetting your password,you may be locked out of the system and unable to access your data.Therefore, please note the following information:• Back up your data on external data carriers at regular intervals.• Some security functions need you to choose passwords. Make a noteof the passwords and keeptheminasafeplace.If you forget your passwords you will need to contact our Service Desk.Deletion or resetting of passwords are not covered by your warrantyand a charge will be made for assistance.Using the security lock (docking cradle only)SecurityLockAnti-theftprotectionSecurityLockYour docking cradle (optional) is equipped with a security device for a Kensington lock cable.You can use the Kensington lock cable, a sturdy steel cable, to protect your docking cradleagainst theft. The Kensington lock cable is available as an accessory.►Fit the lock cable to the device onyour docking cradle.Configuring password protection in BIOS Setup UtilityBefore using the various options for password protection in the BIOS SetupUtility, please proceed as follows to increase data security:Make a note of the passwords and keep them in a safe place. If you forget yoursupervisor password you will not be able to access your Tablet PC. Passwords arenot covered by your warranty and a charge will be made for assistance.Password protectionYour password can be up to 32 characters long and can contain letters, numbers andspecial characters. A distinction is made between upper and lower case.When using special characters, please keep in mind that they depend onthe country version of the attached keyboard.Fujitsu 57
Security functionsProtecting BIOS Setup Utility (supervisor passwordand user password)If you have opened these operating instructions on the screen, we recommendthat you print them out. You cannot call up the instructions on the screenwhile you are setting up the password.BIOSSetupUtilityThe supervisor password and the user password both prevent unauthorized use of the BIOSSetup Utility. The supervisor password allows you to access all of the functions of the BIOS SetupUtility, while the user password will only give you access to some of the functions. You canonly set up a user password if a supervisor password has already been assigned.Calling and using the BIOS Setup Utility is described in the chapter"Settings in BIOS Setup Utility", Page 68.Assigning the supervisor and user passwords►Start the BIOS Setup Utility and go to the Security menu.►Select the Set Supervisor Password field and press the Enter key.With Enter new Password: you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.Changes have been saved is displayed as a confirmation that the new password has been saved.►To set the user password, select Set User Password and proceed exactly aswhen configuring the supervisor password.If you do not want to change any other settings, you can exit BIOS Setup Utility.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.PasswordSupervisor passwordUserpasswordThe Tablet PC is rebooted and the new password is effective. It will now be necessary tofirst enter your supervisor or user password in order to open the BIOS Setup Utility. Pleasenote that the user password only provides access to a few of the BIOS settings.Changing the supervisor password or user passwordYou can only change the supervisor password when you have logged into theBIOS Setup Utility with the supervisor password.PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►When changing the password, proceed exactly as when assigning a password.58 Fujitsu
Security functionsRemoving passwordsTo remove a password (without setting a new password) perform the following steps:PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.You will be requested to enter the current password by the Enter Current Password prompt.Enter New Password will appear and you will be requested to enter a new password.►Press the Enter key twice at this request.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.The Tablet PC is rebooted and the password is removed.Removing the supervisor password simultaneously deactivates the user password.Password protection for booting the operating systemWith the supervisor password you have set in the BIOS Setup Utility (seesection "Assigning the supervisor and user passwords", Page 58), you canalso prevent booting of the operating system.Operating systemActivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the PasswordonBootoption and press the Enter key.►Select the option you require (First Boot or Every Boot) and press the enter key►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).Deactivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the PasswordonBootoption and press the Enter key.►Select the Disabled option and press the Enter key.If you do not want to change any other settings, you can exit BIOS Setup Utility.►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. The system is no longer password-protected.Fujitsu 59
Security functionsPassword protection for the hard diskPasswordprotect ionThe hard disk password prevents unauthorized access to the hard disk drivesand is checked internally each time the system is booted. The condition for thisis that you have assigned at least the supervisor password.Activating hard disk protection►Call up the BIOS Setup and select the Security menu.If you have not assigned BIOS passwords yet, define the supervisor and the userpassword now, if desired (see "Security functions", Page 57).►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0, mark the field Set Master Password and press the Enter key.Enter new Password then appears and you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.With Setup Notice: Changes have been saved you receive confirmation thatthe new password has been saved.The field Password Entry on Boot is set to Enabled by default. You can exit the BIOSSetup once you have finished changing the settings.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and your hard disk is now protected with a password. Thepassword prompt is enabled as soon as the Tablet PC has rebooted.Deactivating hard disk protectionTo cancel a password (without setting a new password) proceed as follows:►Call up the BIOS Setup and select the Security menu.►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0, mark the field Set Master Password and press the Enter key.With the prompt Enter current Password you are first asked to enter the old password again.With Enter new Password you are then prompted to enter a new password.►After the request, press the Enter key three times.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and there is no longer any password protection for this hard disk.60 Fujitsu
Security functionsTrusted Platform Module - TPM (configurationdependent)TPMTrustedPlatfor mModuleTo use the TPM, you must enable the TPM in the BIOS Setup before the software isinstalled. The requirement for this is that you have assigned at least the supervisorpassword (see "Security functions", Page 57).Enabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 57).►Call BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select the entry Enabled to enable the TPMOnce you have enabled the TPM the Clear Security Chip menu item appears.You can clear the holder in the TPM using Clear Security Chip.WithEnabled,all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keysetc.) generated by applications are deleted.Take note that you can then no longer access the data you haveencrypted on the holder-based keys!►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC restarts and the TPM is enabled after the reboot.Disabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 57).►Call BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select the entry Disabled to disable the TPM.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC restarts and the TPM is disabled.Fujitsu 61
Connecting external devicesConnecting external devicesUnder all circumstances, please observe the safety notes provided in the"Important notes", Page 13 chapter before connecting or disconnectingany devices to or from your Tablet PC.Always read the documentation supplied with the device you wish to connect.Never connect or disconnect cables during a thunderstorm.Never pull at a cable when disconnecting it. Always grasp the plug.With some devices, such as USB devices, it is not necessary to switch offthe Tablet PC and the device before connecting/disconnecting. For moreinformation about whether or not devices need to be switched off, please referto the documentation supplied with your external device.Some of the external devices require special drivers (see the operatingsystem and external device documentation).Connecting an external monitorInformation on screen resolution can be found in the section "Screen resolutionsfor integrated screen and external screens", Page 83.Mini Display PortDisplayPortThe mini Display Port of the Tablet PC can be used to connect a monitor, an LCDTV or a plasma TV with a corresponding connection.►Connect the data cable to theexternal device.►Connect the data cable to the miniDisplay Port of the Tablet PC.Some LCD televisions have only two speaker connections and thereforecannot reproduce Dolby Digital or DTS. In order to reproduce the sound, youmust go into Windows and adjust the sound settings.►To do this, deactivate the DTS Audio and Dolby Digital settings in the controlpanel for the Realtek HDMI Output.62 Fujitsu
Connecting external devicesDisplay Port (docking cradle only)DisplayPortThe Display Port of the docking cradle can be used to connect a monitor, an LCDTV or a plasma TV with a corresponding connection. Display output is limited to amaximum of two external screens at the same time.►Connect the data cable to theexternal device.►Connect the data cable to the DisplayPort of the cradle.Some LCD televisions have only two speaker connections and thereforecannot reproduce Dolby Digital or DTS. In order to reproduce the sound, youmust go into Windows and adjust the sound settings.►To do this, deactivate the DTS Audio and Dolby Digital settings in the controlpanel for the Realtek HDMI Output.HDMI port (docking cradle only)HDMIportTheHDMIportof the docking cradle can be used to connect an external amplifier,LCD TV or a plasma TV with an HDMI connection. Display output is limited to amaximum of two external screens at the same time.►Connect the data cable to theexternal device.►Connect the data cable to the HDMIport of the docking cradle.Some LCD televisions have only two speakers/speaker ports and thereforecannot reproduce Dolby Digital or DTS. To play back HDMI sound, youmust change the HDMI sound settings accordingly.You can find the settings under Control Panel - Hardware and Sound. Deactivate thesettings for DTS Audio and Dolby Digital to enable playback of HDMI sound.Fujitsu 63
Connecting external devicesExternal monitor port (VGA) (docking cradle only)An analog monitor is connected to the analog external monitor port (VGA). Display outputis limited to a maximum of two external screens at the same time.MonitorVGAportScreen connectionMonito rconnection►Switch off the Tablet PC and theexternal monitor.►Plug the data cable of the externalmonitor into the monitor port.►First switch on the external monitor andthen switch on the Tablet PC.You can also switch back and forth between the external monitor and the LCDscreen of the Tablet PC, see "Touchscreen", Page 27.You can display the same image on the external monitor and on the LCDscreen of the Tablet PC at the same time.64 Fujitsu
Connecting external devicesConnecting USB devicesUSBportsOn the USB ports you can connect external devices that also have a USB port(e.g. a DVD drive, a printer, a scanner or a modem).USB devices are hot-pluggable. This means you can connect and disconnect thecables of USB devices while the operating system is running.USB 1.x has a maximum data transfer rate of 12 Mbps.USB 2.0 has a data transfer rate of up to 480 Mbps.USB 3.0 has a data transfer rate of up to 5 Gbps.Additional information can be found in the documentation for the USB devices.►Connect the data cable to theexternal device.►Connect the data cable to the USBport of the Tablet PC.or►Connect the data cable to a USBport of the cradle.Device driversUSB devices will be automatically recognized and installed by your operating system.Fujitsu 65
Connecting external devicesUSB port with charging function (Anytime USB charge)USBchargingfunctionIt is recommended that the Tablet PC is operated with the power supply connectedwhenever the USB port with charging function is in use, as the battery runtimeis reduced if additional USB devices are being charged.The power supply must already be connected when the Tablet PC isswitched off, as otherwise the USB charging function will not be active andthe connected USB devices will not be charged.Some USB devices (e.g. mobile phones) need a driver to be able to use the USBcharging function. In this case the USB charging function will not work when the TabletPC is switched off, as no drivers are active when the Tablet PC is switched off.You can use this USB port to charge or supply power to a USB device (e.g. to chargea PDA or a mobile phone or to connect a USB lamp).This is also possible even when the Tablet PC is switched off, if in the BIOS-Setup-Utility,inthe menu Advanced, the function Anytime USB Charge is enabled. If the setting AC is selectedthereby, the device will only be charged when the mains adapter is connected.Calling and using the BIOS Setup Utility is described in the section"Settings in BIOS Setup Utility", Page 68.How to remove USB devices correctlyAlways correctly remove the device according to the rules described below,to ensure that none of your data is lost.►Tap the symbol for safe removal of the hardware.►Select the device you wish to shut down and remove.►Tap OK.Wait for the dialog box which tells you that it is now safe to remove the device.66 Fujitsu
Connecting external devicesConnecting external audio devicesYour Tablet PC has a combined headphone and microphone port, your (optional) dockingcradle has separate ports for headphones and a microphone.Connecting headphones or other audio output devicesConnectingaudio devicesAudioconnectionsConnectingheadph onesThe combined headphones and microphone port of the Tablet PC or the headphonesport of the docking cradle (optional) allows you to connect output devices, such asheadphones, external speakers, etc., to your Tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cable to the combinedheadphones and microphone port of theTablet PC or to the headphone port ofthe docking cradle (optional).The internal speakers are disabled.If you buy a cable from a retailer, please note the following:The combined headphone and microphone port on your Tablet PCisa"3.5mmjacksocket".If you want to connect headphones or speakers you will need a "3.5 mm jack plug".Connecting a microphone or other audio input devicesConnectingaudio devicesAudioconnectionsConnectingmicrophoneThe combined headphones and microphone port of the Tablet PC or the microphone portof the docking cradle (optional) allows you to connect an external microphone, a MiniDiscplayer, MP3 player, CD player or a tape deck to your Tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cable to the combinedheadphones and microphone port of theTablet PC or to the microphone port ofthe docking cradle (optional).Fujitsu 67
Settings in BIOS Setup UtilitySettings in BIOS Setup UtilityBIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupConfiguring systemConfiguringhardwareTo navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard.The BIOS Setup Utility allows you to set the system functions and the hardwareconfiguration for the Tablet PC.When the Tablet PC is delivered, the default settings are effective. You can changethese settings in the menus of the BIOS Setup Utility. Any changes you make takeeffect as soon as you save and exit the BIOS Setup Utility.The BIOS Setup Utility program contains the following menus:Info Displays information relating to the BIOS, processor and Tablet PCSystem Advanced system settingsAdvanced Configuration of various hardware components, such as mouse, keyboard,processorSecurity Password settings and security functionsBoot Configuration of the start-up sequenceExit Exits the BIOS Setup UtilityStarting the BIOS Setup Utility►Keep the Volume Down button pressed and switch on the Tablet PC.BIOSSetupUtility►If a password has been assigned, enter the password and press the Enter key.If you have forgotten the password, contact your system administratoror contact our customer service centre.The BIOS Setup Utility starts.68 Fujitsu
Settings in BIOS Setup UtilityBIOS Setup Utility operationBIOSSetupUtilityPress the F1 key to display help about operation of the BIOS Setup Utility. The descriptionof the individual settings is shown in the right-hand window of the BIOS Setup Utility.With the F9 key you can load the default settings of the BIOS Setup Utility.►Use the cursor keys ←or →to select the menu you wish to access to make changes.The menu is displayed on the screen.►Select the option you want to change with the cursor keys ↑or ↓.►Press the "Enter" key.►Press the ESC key to exit the selected menu.►For future reference, make a note of the changes you have made (for example, in this manual).Fujitsu 69
Settings in BIOS Setup UtilityExiting BIOS Setup UtilityBIOSSetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:Exit Saving Changes - save changes and exit BIOS Setup Utility►To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.The Tablet PC is rebooted and the new settings come into effect.Exit Discarding Changes - Reject changes andexit BIOS Setup Utility►To discard the changes, select Exit Discarding Changes and Yes.The settings which were valid when BIOS Setup Utility was called remain effective.The BIOS Setup Utility ends and the Tablet PC is rebooted.Load Setup Defaults – load default values►To copy the standard entries for all menus of the BIOS Setup Utility,choose Load Setup Defaults and Yes.Discard Changes - Discard Changes withoutexiting BIOS Setup Utility►To discard the changes you have made, select Discard Changes and Yes.The settings in place when BIOS Setup Utility was called remain effective.You can now make additional settings in the BIOS Setup Utility.►IfyouwanttoexittheBIOS Setup Utility with these settings, select Exit Saving Changes and Yes.Save Changes - save changes without exitingthe BIOS Setup Utility►To save the changes, select Save Changes and Yes.The changes are saved. You can now make additional settings in the BIOS Setup Utility.►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.Save changes and power off►To save the changes and switch off your device, select Save Changes and Power Off and Yes.The changes are saved. Your device is shut down.70 Fujitsu
Troubleshooting and tipsTroubleshooting and tipsTroubleshootingTipsFaultProblem solvingIf a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:►Make a note of the steps and the circumstances that led to the fault. Alsomake a note of any error messages displayed.►Switch the Tablet PC off.►Please contact the Hotline/Service Desk.You can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• The model name and serial number of the Tablet PC. The serial numberis located on a sticker on the underside of the Tablet PC.• Notes with the messages that appeared on the screen andinformationonacoustic signals.• All changes you have made to the hardware or software after receiving the Tablet PC.• All changes you have made to the BIOS Setup settings after receiving the Tablet PC.• Your system configuration and all peripheral devices connected to your system.• Your sales contract.Our Tablet PCs have been designed primarily with mobile applications in mind.This means that considerable effort has been made to optimize components andequipment in terms of weight, space and energy requirements. Depending on theparticular configuration you have purchased, it is possible that functionality may beslightly reduced compared to a desktop PC if you are running processor-intensivegaming software, e.g. games with intensive 3D graphics. Updating your hardware withdrivers which have not been approved by Fujitsu may result in performance losses,data losses or malfunction of the equipment. A list of approved drivers and currentBIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"Fujitsu 71
Troubleshooting and tipsExecuting a resetIf the device no longer responds to your inputs, choose one of the following options:Forced shutdown►Press and hold the ON/OFF button for at least 4 seconds.The device will be shut down. You can then restart it.Carry out a system or battery resetIf the device does not respond, first try to force the shutdown, asdescribed in the previous section.►Disconnect the mains adapter from the device.On the rear side of the device you can find a small hole.►Use a small pointed tool with caution to press the reset button below this hole.The device performs a reset, comparable to removing the battery. You can then restart it.Help if problems occurShould you encounter a problem with your computer that you cannot resolve yourself:►Note the ID number of your device. The ID number is found on the type ratingplate on the back or underside of the casing.►For further clarification of the problem, contact the Fujitsu Service Desk. When you dothis, please have ready the ID number and serial number of your system.Recovering your Factory ImageIn the event you need to restore your original Factory Image, please refer tothe appendix of this Operating Manual.The TabletPC’sdateortimeisincorrectSummertimeWintertimeIncorre cttimeTimenot correctWrongdate/timeDatenotcorrectChargingback-up batteryCause TroubleshootingTime and date are incorrect. ►With the BIOS-Setup-Utility, you can set thedate and time in the Main menu.Date and time are still set incorrectly afterswitching on the Tablet PC.►Please contact your sales outlet or ourhotline/service desk.72 Fujitsu
Troubleshooting and tipsBattery charging indicator not litCause TroubleshootingThe battery is not being charged. ►Connect the Tablet PC to a power outletusing the AC adapter.Note: The battery will only be charged againwhen the battery capacity is less than 90%.The Tablet PC’s touchscreen remains darkTou ch s c re e ndark touchscreenCause TroubleshootingTouchscreen is switched off. ►Press a key (external keyboard) or tap onthe touchscreen.External monitor or television set connected. ►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The display on the Tablet PC’s touchscreenis difficult to read.Tou ch s c re e nTo u ch s c re e nCause TroubleshootingReflected glare ►Move the Tablet PC into a different position.►Increase the brightness of the screen.Fujitsu 73
Troubleshooting and tipsThe external monitor remains blankMonitorCause TroubleshootingMonitor is switched off. ►Switch the external monitor on.Power saving has been activated (monitor isblank).►Press a key (external keyboard) or tap onthe touchscreen.Brightness is set to dark. ►Adjust the brightness of the monitor.Screen output is set to the Tablet PCtouchscreen.►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The external monitor’s AC cable or data cable isnot connected properly.►Switch off the Tablet PC and the externalmonitor.►Check whether the AC cable is pluggedproperly into the external monitor and intothe power outlet.►Check that the data cable is properlyconnected to the Tablet PC and the externalmonitor (if it is plugged in with a connector).►Switch on the external monitor and theTablet PC.The external monitor is blank or the image is unstableMonitorMonitorCause TroubleshootingThe wrong external monitor has been selectedor the wrong screen resolution has been set forthe application program.►Shut down the application program inWindows. If the error persists after shuttingdown the program, use the key combinationfor switching the screen output in order toswitch to the touchscreen of the Tablet PC.Change the following setting:►Set the screen resolution: Set the screenresolution as described in the documentationforyouroperatingsystem.►Select monitor: Select monitor 1 or 2 asdescribed in the documentation for youroperating system.The cursor does not correctly follow thestylus movementsCause TroubleshootingStylus incorrectly calibrated. ►Calibrate the stylus as described in chapters"Adjusting the stylus", Page 33 and"Calibrating the stylus", Page 33.74 Fujitsu
Troubleshooting and tipsStylus input not workingCause TroubleshootingIncorrect driver installed. ►If your device is one which can only beoperated using the stylus, install the driverfor the standard model.or►If your device is one which can beoperated using the stylus and by finger,install the driver for the "Dual Digitizer"model.Stylus is in sleep mode. ►Press the upper stylus button to wake thestylus from sleep mode.Stylus battery is completely discharged. ►Change the stylus battery as described inchapters "Removing the stylus battery",Page 34 and "Installing the stylus battery",Page 34.The Tablet PC does not start after switch onTabletPCCause TroubleshootingThe battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.The AC adapter is not connected properly. ►Check whether the AC adapter is properlyconnected to the Tablet PC.►Switch the Tablet PC on.The Tablet PC stops workingTabletPCEndingCause TroubleshootingThe Tablet PC is in energy saving mode. ►End energy saving mode.An application program has caused themalfunction.►Close the application program or restartthe Tablet PC (by restarting the operatingsystem or switching the device off and backon again).The battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.Fujitsu 75
Troubleshooting and tipsThe printer does not printPrinterdoesnot printCause TroubleshootingThe printer is not switched on. ►Make sure that the printer is switchedon and ready for operation (refer to thedocumentation supplied with the printer).The printer is not connected correctly. ►Check that the data cable between the TabletPC and the printer is properly connected.The printer driver is faulty or not correctlyinstalled, or it is the wrong printer driver.►Check that the data cable between the TabletPC and the printer is properly connected.►Check whether the correct printer driver isloaded (refer to the printer documentation).The wireless connection to a network does not workThewireless connectionto anetwork doesnotwor kCause TroubleshootingThe wireless component is switched off. ►Switch the wireless component on (see"Switching the wireless components on andoff", Page 40).The wireless component is switched on. Despitethis, the wireless connection to a network doesnot work.►Check whether the wireless connection isenabled by the software.►Further information on using the wirelesscomponent can be found in the help files.The battery discharges too quicklyBatteryCause TroubleshootingThe battery is either too hot or too cold. In thiscase the battery indicator flashes.►Bring the Tablet PC up/down to a normaloperating temperature again.►If the operating time of the battery life isextremely short, the battery is probably tooold. Replace the battery if necessary.You may have an application running thatconsumes a great deal of power due to frequentaccessing of the hard disk or optical drive.►Use the AC adapter whenever possible.The maximum brightness may have been setfor the screen.►Reduce the brightness of the screen tolower energy consumption: You will find thesetting under Control Panel – Hardware andSounds – Windows Mobility Center.76 Fujitsu
Troubleshooting and tipsAcoustic warningAcous tic wa rnin gsErrorsCause TroubleshootingA beep sounds every few seconds.The battery is almost dead.►Charge the battery.Fujitsu 77
Troubleshooting and tipsError messages on the screenErrormessages onthes creenErrorsThis section describes the error messages generated by the BIOS Setup. Error messages displayedby the operating system or programs are described in the documentation for these programs.If the error message appears repeatedly despite troubleshooting measures,contact the place of purchase or our customer service center.78 Fujitsu
Troubleshooting and tipsError message/cause TroubleshootingCMOS battery badIf the error message occurs repeatedly, thebuffer battery in the Tablet PC is flat.►Contact your sales outlet or our customerservice center.System CMOS checksum bad - Default configurationusedThe system configuration information isincorrect.►Switch the Tablet PC off.►Switch the Tablet PC on.►In the BIOS Setup, select the Exit menu.►Select the entry Load Setup Defaults.►Select OK and press the Enter key.Extended memory failed at offset: xxxx Failing Bits:zzzz zzzzWhen testing the extended memory. an errorhas resulted at the address xxxx.►Contact your sales outlet or our customerservice center.Failure Fixed Disk nThe settings of the hard disk drive are incorrect.►Start the BIOS Setup (Primary Mastersubmenu) and select the correct settings.Keyboard controller error ►Switch your Tablet PC off with the ON/OFFbutton.►Wait 3 - 5 seconds and switch the Tablet PCon again.Keyboard error If you use an external keyboard:►Check the connection and reboot the TabletPC.nn Stuck key ►Make sure that no key is pressed.Operating system not found ►Check in the BIOS Setup whether your harddisk has been set correctly.►Make sure that the operating system isinstalled on the corresponding drive.Press <F1> to resume, <F2> to SETUPThis error message appears if an error occursduring the self-test before starting the operatingsystem.►Press the volume up button to start theBIOS Setup.or►If you use an external keyboard, pressthe F1 or F2 key on the keyboard.Real time clock error ►Contact your sales outlet or our customerservice center.nnnnK Shadow RAM failed at offset: xxxx FailingBits: zzzz ►Contact your sales outlet or our customerservice center.System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customerservice center.System cache error - Cache disabled ►Contact your sales outlet or our customerservice center.System timer error ►Contact your sales outlet or our customerservice center.Fujitsu 79
Technical dataTechnical dataTablet PCGeneralProcessor 7.Generation Intel® CoreTM m processor familyMain memory (SO DIMM) 4 GB / 8 GB DIMM onboardElectrical dataSafety regulations complied with CEProtection class IIMaximum power consumption (when the TabletPC is switched on, connected to the magnetickeyboard and the docking cradle, and thebattery is being charged):65 WTouch screenSize 12.5" Full HD Wide ViewScreen resolution 1920 x 1080 / 16 million colorsPixel class IIBrightness control 12 levelsTechnology Wide-View High-Bright Display with LEDbackground lightingDigitizer and glass panel Dual digitizer with touch screenCameras • Front: Full HD• Rear: 5 megapixel, autofocusGraphics cardChip Intel® HD Graphics 520 (CPU integrated)Maximum resolution of external display: 4096 x 2304DimensionsWidth x Depth x Height 12.56 x 7.93 x 0.37 inches319 x 201.3 x 9.5 mmWeight depending on configuration from 1.71 lbs / 775 gInput devicesTablet buttons 3buttonsStylus (optional) Stylus with two buttonsSlotsMemory card slot 1xmicroSDPortsCombined headphones and microphone port 3.5mmstereominijackDocking port 1 x for magnetic keyboard1 x for docking cradle80 Fujitsu
Technical dataMini Display Port 1 xUSB (Universal Serial Bus) 1 x USB 3.0 (Anytime USB Charge)Ambient conditionsEnvironment class DIN IEC 7217K1Mechanism class DIN IEC 721 7M2Operating temperature 41 °F .... 95 °F / 5 °C .... 35 °CTransport temperature (2K2) 5 °F .... 140 °F / –15 °C .... 60 °CFujitsu 81
Technical dataWLAN specificationsType of network Intel® Dual Band Wireless-AC 8265 2x2 ac with integrated Bluetooth 4.2Transfer rate (Automatic switching) IEEE802.11 a and g: 54Mbps max. data rate; IEEE802.11n: 300 Mbpsmax. data rate, IEEE802.11ac: 867 Mbps max.data rateActive frequency • 802.11n: 2.4 GHz or 5 GHz• 802.11b/g: 2,400~2,473 MHz• 802.11a. 4900~5850 MHz• 802.11ac: 2.4 GHz / 5 GHzTypical operating distances • 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91m)@6Mbps• 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91m)@6Mbps• 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.(91m)@1Mbps• 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.(91m)@1Mbps• 802.11n: Estimated double the operatingdistance of 802.11g and 802.11a in theirrespective frequenciesNumber of channels • 802.11a: 8 independent channels• 802.11b/g: 11 channels, 3 non-overlappingchannels• 802.11n: Channel bonding takes two ofthe non-overlapping 20MHz channels andcombines it into one 40MHz channel. It isactually 12 non-overlapping channels withchannel bonding and 24 without. Also it is 1non-overlapping channel in 2.4GHz whenchannel bonding is used.• 802.11ac: 5 independent channelsSecurity Encryption types: WEP, TKIP, AES, WPA 1.0and WPA 2.0 compliantEncryption key, lengths supported: 64 bits and128 bitsMaximum recommended number of computersto be connected over wireless LAN (during adhoc connection)10 units or less82 Fujitsu
Technical dataScreen resolutions for integrated screenand external screensPort onthe TabletPC PortsonthedockingcradleMax.numberofscreensNumberofexternalscreensInte-gratedscreenMiniDisplay-Port HDMI DisplayPort VGAOnlyTablet PC 21 4096x2304@60Hz ----4096x2160@24Hz3840x2160@30Hz1920x1080@60Hz----4096x2304@60Hz -21---1920x1200@60Hz4096x2304@60Hz4096x2160@24Hz3840x2160@30Hz1920x1080@60Hz--4096x2304@60Hz -4096x2160@24Hz -4096x2304@60Hz --1920x1080@60Hz-1920x1080@60Hz 1920x1080@60Hz --1920x1080@60Hz-1920x1080@60HzTabletPC anddockingcradle321920x1080@60Hz--1920x1080@60Hz 1920x1080@60HzFujitsu 83
Technical dataRechargeable batteryFor information on the batteries used in your device, please see"http://solutions.us.fujitsu.com/www/content/support/contact/index.php".4-cell lithium ion rechargeable battery 4200Rated voltage 7.8 VRated capacity 34 WhAC adapter 65 W for the Tablet PC andthe docking cradleTechnicaldataRated voltage 19 VoltsMax. rated current 3.42 AAn additional AC adapter or AC cable can be ordered at any time.Docking cradle (optional)Electrical dataSafety regulations complied with CEProtection class IIIPortsHeadphone port 3.5 mm stereo mini jackMicrophone port 3.5 mm stereominijackDocking port 50-pinDisplay Port 1xHDMI port1xVGA monitor port 1xUSB (Universal Serial Bus) 2 x USB 3.0LAN port 1 xSecurity Lock device 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 41 °F .... 95 °F / 5 °C .... 35 °CTemperature in transit 5 °F .... 140 °F / –15 °C .... 60 °C84 Fujitsu
Technical dataMagnetic keyboard (optional)Electrical dataSafety regulations complied with CEProtection class IIIPortsDocking port 6-pinAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 41 °F .... 95 °F / 5 °C .... 35 °CTemperature in transit 5 °F .... 140 °F / –15 °C .... 60 °CFujitsu 85
Manufacturer’s notesManufacturer’s notesDisposal and recyclingNotesYou can find information on this subject on your notebook or on our website("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/").Recycling your batteryOver time, the batteries that run your mobile computer will begin to hold a charge for ashorter amount of time; this is a natural occurrence for all batteries. When this occurs,you may want to replace the battery with a fresh one*. If you replace it, it is importantthat you dispose of the old battery properly because batteries contain materials thatcould cause environmental damage if disposed of improperly.Fujitsu is very concerned with environmental protection, and has enlisted the services of theRechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organizationdedicated to protecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thousands of locations throughout the United States andCanada. To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.If there are no convenient RBRC locations near you, you can also go to the EIA ConsumerEducation Initiative website "http://EIAE.org/ " and search for a convenient disposal location.Remember – protecting the environment is a cooperative effort, and we mustmake every effort to protect it for current and future generations.* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping siteat "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.** RBRC is an independent third party to which Fujitsu provides funding forbattery recycling; RBRC is in no way affiliated with Fujitsu.DOC (Industry CANADA) NoticesDOC(INDUSTRYCANADA)NOTICESRadios and TelevisionThis Class B digital apparatus meets all requirements of Canadian Interference-Causing EquipmentRegulations.CET appareil numérique de la class B respecte toutes les exigence du Réglementsur le matérial brouilleur du Canada.86 Fujitsu
Manufacturer’s notesUL NoticeIMPORTANT SAFETY INSTRUCTIONSThis unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output ratingof 19 VDC, with a minimum current of 3.42 A (65 W). The correct output rating is indicated on theAC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:When using your tablet PC equipment, basic safety precautions should always be followed toreduce the risk of fire, electric shock and injury to persons, including the following:• Do not use this product near water, for example near a bathtub, washbowl, kitchensink or laundry tub, in a wet basement or near a swimming pool.• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in afire. They may explode. Check with local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSFor Authorized Repair Technicians OnlyCAUTION:For continued protection against risk of fire, replace only with thesame type and rating fuse.WARNING:Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace onlywith the same or equivalent type recommended by the manufacturer.Dispose of used batteries according to the manufacturer’s instruction.Fujitsu 87
Manufacturer’s notesENERGY STAR ComplianceYour Fujitsu system is an ENERGY STAR qualified mobile PC. Bychoosing a computer with the latest energy-saving technology, you’rehelping to preserve our environment for future generations. ENERGYSTAR is a joint program of the U.S. Environmental Protection Agency,U.S. Department of Energy, Natural Resources Canada, and othergovernments around the world helping us save money while protectingthe environment through energy efficient products and practices. Withenergy costs and global warming top-of-mind for consumers, Fujitsu iscommitted to offering solutions that help consumers conserve energyand improve the quality of our environment.Sleep mode:You will notice that your computer is initially set so that the display turns off after 10 minutes ofuser inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. Whengoing into Sleep mode, the computer also reduces the speed of any active Ethernet networklinks. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.Energy saving benefits:Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standardequipment – saving half in utility costs. But more than that, ENERGY STAR also makes a differencefor the environment. Did you know that the average house can be responsible for twice thegreenhouse gas emissions as the average car? That’s because every time you flip on a lightswitch, run your dishwasher, or turn on your PC, you use energy, which means more greenhousegas emissions from power plants. So the more energy we can save through energy efficiency,the more we help to reduce greenhouse gases and the risks of global warming.To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".To read about how Fujitsu is supporting Sustainable Management along withseveral other environmental activities, visit the Fujitsu Corporate Citizenship page at:"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".88 Fujitsu
Declarations of conformityDeclarations of conformityDeclarationsof conformityThis device complies with Part 15 of the FCC Rules. Operations are subject to the following twoconditions: (1) This device may not cause harmful interference, (2) this device must accept anyinterference received, including interference that may cause undesired operation.Fujitsu 89
FCC Regulatory InformationFCC Regulatory InformationPlease note the following regulatory information related to the wireless LANdevice.You are cautioned that changes or modifications not expressly approved by thepart responsible for compliance could void the user’s authority to operate theequipment.FCC RF Radiation Exposure Statement:1. This Transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth foran uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body. For body worn operation, thistablet has been tested and meets FCC RF exposure guidelines when used withan accessory that contains no metal and that positions the handset a minimum of0 mm from the body.Use of other accessories may not ensure compliance with FCC RF exposureguidelines. This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:1. this device may not cause harmful interference and2. this device must accept any interference received, including interference thatmay cause undesired operation of the device.The highest FCC SAR values: 1.163 W/Kg (Body)Regulatory Notes and StatementsWireless LAN, Health and Authorization for useRadio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels ofthese emissions, however, are far much less than the electromagnetic energy emissions from wirelessdevices such as mobile phones. Wireless LAN devices are safe for use by consumers because theyoperate within the guidelines found in radio frequency safety standards and recommendations. Theuse of Wireless LAN devices may be restricted in some situations or environments, such as:• On board an airplane, or• In an explosive environment, or• In situations where the interference risk to other devices or services isperceived or identified as harmful.In cases in which the policy regarding use of Wireless LAN devices in specific environments isnot clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtainauthorization to use these devices prior to operating the equipment.90 Fujitsu
FCC Regulatory InformationRegulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructionsincluded in the user documentation provided with the product. Any changes or modifications madeto this device that are not expressly approved by the manufacturer may void the user’s authority tooperate the equipment. The manufacturer is not responsible for any radio or television interferencecaused by unauthorized modification of this device, or the substitution or attachment of connectingcables and equipment other than those specified by the manufacturer. It is the responsibility of theuser to correct any interference caused by such unauthorized modification, substitution or attachment.The manufacturer and its authorized resellers or distributors will assume no liability for any damageor violation of government regulations arising from failure to comply with these guidelines.This device must not be co-located or operated in conjunction with any other antenna or transmitter.For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it isrestricted to indoor environments, and the antenna of this device must be integral.Federal Communications Commission and IndustryCanada statement:This device complies with Part 15 of FCC Rules.Operation is subject to the following two conditions: (1) This device may not causeinterference, and, (2) This device must accept any interference, including interferencethat may cause undesired operation of this device.FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy. If not installed and used in accordance withthe instructions, it may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the distance between the equipment and the receiver.3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.4. Consult the dealer or an experienced radio/TV technician for help.Fujitsu 91
FCC Regulatory InformationFCC Radio Frequency Exposure statementThe available scientific evidence does not show that any health problems are associated withusing low power wireless devices. There is no proof, however, that these low power wirelessdevices are absolutely safe. Low power wireless devices emit low levels of radio frequencyenergy (RF) in the microwave range while being used. Whereas high levels of RF can producehealth effects (by heating tissue), exposure to low-level RF that does not produce heatingeffects causes no known adverse health effects. Many studies of low-level RF exposure havenot found any biological effects. Some studies have suggested that some biological effectsmight occur, but such findings have not been confirmed by additional research.The wireless LAN radio device has been tested and found to comply with FCC radiationexposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency(RF) Exposure Guidelines in Supplement C to OET65.The exposure standard for wireless devices employs a unit of measurement known as theSpecific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.This device is compliant with SAR for general population /uncontrolled exposure limits in ANSI/IEEEC95.1-1992, and had been tested in accordance with the measurement methods and proceduresspecified in OET Bulletin 65 Supplement C. This device has been tested, and meets the FCC,IC RF exposure guidelines when tested with the device operating conditions.Export restrictionsThis product or software contains encryption code which may not be exported or transferredfrom the US or Canada without an approved US Department of Commerce export license.This device complies with Part 15 of FCC Rules, as well as ICES 003 B / NMB 003 B.Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interferencethat may cause undesirable operation. Modifications not expressly authorized by FujitsuAmerica, Inc. may invalidate the user’s right to operate this equipment.The highest FCC SAR value is 1.163 W/Kg (Body SAR).Restrictions concernant l’exportationCe produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré duCanada ou des États-Unis sans un permis d’exportation du département du commerce desÉtats-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à lanorme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit acceptertoutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnementde l’appareil. Toute modification n’ayant pas été expressément approuvée par la société FujitsuAmerica Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.La valeur FCC SAR la plus élevée est de 1,163 W / Kg (SAR Body).92 Fujitsu
Canada, Industry Canada (IC)Canada, Industry Canada (IC)This Class B digital apparatus complies with Canadian ICES-003 and RSS-247. This devicecomplies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference, including interference that maycause undesired operation of the device.IC RF Radiation Exposure Statement:For body worn operation, this device has been tested and meets RF exposure guidelines when usedwith an accessory that contains no metal and that positions the device a minimum of 0 mm from thebody. Use of other accessories may not ensure compliance with RF exposure guidelines.Cet appareil numérique de classe B est conforme à la norme NMB-003 etRSS-247. Le présent appareil est conforme aux CNR d’Industrie Canada applicablesaux appareils radio exempts de licence.L’exploitation est autorisée aux deux conditions suivantes:1. l’appareil ne doit pas produire de brouillage, et2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d’en compromettre le fonctionnement.Déclaration de l’exposition aux radiations RF:Pour le fonctionnement du corps, ce téléphone a été testé et répond aux directivesd’exposition RF lorsqu’il est utilisé avec un accessoire qui ne contient pas de métal etqui place le combiné d’un minimum de 0 mm du corps. Utilisation d’autres accessoirespeut ne pas assurer le respect des directives d’exposition RF.Canadian NoticeThe device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potentialfor harmful interference to co-channel mobile satellite systems.The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in RSS-247.In addition, users are cautioned to take note that high power radars are allocated as primaryusers (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and theseradars could cause interference and/or damage to LE-LAN devices.Fujitsu 93
Canada, Industry Canada (IC)Avis pour le CanadaLe matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utiliséuniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé auxsystèmes mobiles par satellite fonctionnant sur un même canal.Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximalepermise selon l’annexe A9.2 afférent aux périphériques RSS-247.En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissancesont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) desbandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférenceset/ou des dommages aux appareils de réseau exempts de licence.94 Fujitsu
AppendixAppendixBefore Using the Optional Wireless LANThis manual describes the procedures required to properly set up and configure the optionalintegrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of themanual). Before using the WLAN device, read this manual carefully to ensure its correctoperation. Keep this manual in a safe place for future reference.Wireless LAN Devices Covered by this DocumentThis document is applicable to systems containing the following device:•Intel® Dual Band Wireless-AC 8265 2x2 ac with integrated Bluetooth 4.0Characteristics of the WLAN Device• The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.• The WLAN devices operate in license-free RF bands, eliminating the need to procurean FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHzUnlicensed National Information Infrastructure (UNII) bands.• The WLAN devices are capable of five operating modes, IEEE802.11a, IEEE802.11ac,IEEE802.11b, IEEE802.11g, and IEEE802.11n.• The WLAN device is Wi-Fi certified and operates (as applicable) at a the maximumdata rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this configuration); 54 Mbpsin IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.• The WLAN devices support the following encryption methods - WEP,TKIP, CKIP, and AES encryption.• The Wireless LAN devices are compliant with the following standards: WPA,WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.Fujitsu 95
AppendixWireless LAN Modes Using this DeviceAd Hoc Mode"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivitybetween multiple computers is established without a central wireless network device, typicallyknown as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peerfashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hocnetworks are an easy and inexpensive method for establishing network connectivity betweenmultiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryptionkey settings are identically configured on all computers in the Ad Hoc network.96 Fujitsu
AppendixAccess Point (Infrastructure) ModeInfrastructure mode refers to a wireless network architecture in which devices communicate withwireless or wired network devices by communicating through an Access Point. In infrastructuremode, wireless devices can communicate with each other or with a wired network. Corporatewireless networks operate in infrastructure mode because they require access to the WLAN inorder to access services, devices, and computers (e.g., file servers, printers, databases).**** = An optional hub for a wired LAN maybe required depending upon the typeof access point used.** = ADSL modem, cable modem, or similarFujitsu 97
AppendixHow to Handle This DeviceThe WLAN device is an optional device that may come pre-installed in your mobile computer. Undernormal circumstances, it should not be necessary for you to remove or re-install it. The OperatingSystem that your mobile computer comes with has been pre-configured to support the WLAN device.• Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11b,IEEE802.11ac, IEEE802.11g, and IEEE802.11n.• The WLAN device operates in the 2.4 GHz ISM band and the 5 GHzlower, middle, and upper UNII bands.• Microwave ovens may interfere with the operation of WLAN devices since they operate in thesame 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwavesdoes not occur with IEEE802.11a radio which operates in the 5 GHz RF band.• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLANdevices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,intermittent disconnects, and many frame errors. It is HIGHLY recommended that theseinterfering devices be powered off to ensure proper operation of the WLAN device.Deactivating/Disconnecting the WLAN DeviceDisconnecting the WLAN device may be desired in certain circumstances (to extend batterylife) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). TheWLAN device can be disconnected in Windows using the WLAN icon in the system tray(Note that disconnecting via the icon in the system tray does not turn off the radio; itcontinues to transmit and receive even though it’s not connected.)The radio components are switched on and off using the appropriate functions of the operating system.►To switch radio components on and off individually, select Settings – ChangePC settings – Wireless – Wireless devices – Off.Configuring the Wireless LANThe optional WLAN device can be configured to establish wireless network connectivityusing the software that is built into Windows. Support for most industry standardsecurity solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult withyour network administrator for these parameters:Connection to the networkAfter you have configured your computer, you can connect to an active networkby performing the following steps:1. Click on the WLAN icon in the system tray.2. Select Connect to a network.3. Select a network from the list that appears, and click the Connect button.98 Fujitsu
AppendixTroubleshooting the WLANCauses and countermeasures for troubles you may encounter while using yourwireless LAN are described in the following table.Problem Possible Cause Possible SolutionIncorrect network name (SSID)or network key Ad hoc connection: verify thatthe network names (SSID’s)and network keys (WEP) ofall computers to be connectedhave been configured correctly.SSID’s and WEP key valuesmust be identical on eachmachine.Access Point (Infrastructure)connection: set the networkname (SSID) and network keyto the same values as those ofthe access point.Set the Network Authenticationvalue identically to that of theAccess Point. Please consultyour network administrator forthis value, if necessary.Unavailable network connectionWeak received signal strengthand/or link quality Ad hoc connection: Retryconnection after shorteningthe distance to the destinationcomputer or removing anyobstacles for better sight.Access Point (Infrastructure)connection: Retry connectionafter shortening the distance tothe access point or removingany obstacles for better sight.Fujitsu 99
AppendixProblem Possible Cause Possible SolutionThe WLAN device wasdeactivated or is disabled Check if the wireless switchis turned On. Go to Start >Control Panel, and doubleclickon Windows Mobility Center.Ifthe wireless network is off, clickthe Turn wireless on button.The computer to be connectedis turned off Check if the computer to beconnected is turned ON.Incorrectly configured networksettings Recheck the configuration ofyour network settings.RF interference from AccessPoints or other wirelessnetworksThe use of identical oroverlapping RF channelscancause interference with theoperation of the WLAN device.Change the channel of yourAccess Point to a channelthat does not overlap with theinterfering device.Wireless network authenticationhas failed Re-check your NetworkAuthentication, Encryption,and Security settings.Incorrectly configuredsecurity settings such asan incorrectly typed WEPkey, a mis-configured LEAPusername, or anincorrectlychosen authentication methodwill cause theLANdevicetoassociate but not authenticateto the wireless network.Unavailable network connection(continued)Incorrect IP addressconfiguration This only applies to networksusing static IP addresses.Please contact your networkadministrator for the correctsettings.100 Fujitsu
AppendixImage Backup and Recovery ProceduresIt is very important that you create your Recovery Drive before beginning to use your system.It is also important that you create a backup of the content of the C:\Drivers folder onyour system to writable media or an external drive. System-specificsoftwaredriversare also available for download through the Fujitsu support site.Note: Most of the information below comes from the Microsoft® page"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options" .Please refer to it for more details.Creating a recovery driveA recovery drive can help you troubleshoot and fix problems with your PC, even if itwon’t start. To create one, all you need is a USB flash drive. Windows will inform youofthesizetheUSBflash drive needed to hold the required data.1. From the taskbar, search for Create a recovery drive and then select it. You may beasked to enter an administrator password or confirm your selection.2. When the tool opens, make sure Backup system files to the recovery driveis selected and then select Next.3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number offiles need to be copied to the recovery drive, so this could take some time.4. When it’s done, select Finish.Note:If you chose not to back up the system files when you created your recovery drive onWindows 10, you won’t be able to use it to reinstall Windows.Recovery options in Windows 10If your PC isn’t running as quickly or reliably as it used to, try one of these recoveryoptions. The following table can help you decide which one to use.Problem Try thisYour PC isn’t working well and you recentlyinstalled an app, driver, or update. Restore from a system restore pointYour PC isn’t working well and it’s been a whilesince you installed anything new. Reset your PCYour PC won’t start and you’ve created arecovery drive. Use a recovery drive to reinstall WindowsYour PC won’t start and you haven’t created arecovery drive. Use installation media to reinstall WindowsRestore from a system restore pointThis option takes your PC back to an earlier point in time, called a system restore point. Restorepoints are generated when you install a new app, driver, or Windows update, and when youcreate a restore point manually. Restoring won’t affect your personal files, but it will removeapps, drivers, and updates installed after the restore point was made.Fujitsu 101
Appendix1. Right-click (or press and hold) the Start button, and then select Control Panel.2. Search Control Panel for Recovery.3. Select Recovery - Open System Restore - Next.4. Choose the restore point related to the problematic app, driver, or update,and then select Next - Finish.Note: If you don’t see any restore points, it could be because the system protection isn’t turnedon. To check, go to the Control Panel,searchforRecovery, and then select Recovery - ConfigureSystem Restore - Configure and make sure that Turn On System Protection is selected.Reset your PCOption What it doesKeep my files This reinstalls Windows 10, but keeps your personal files and anyapps that came with your PC. It removes:• Changes you made to settings• Apps and drivers you installedRemove everything This reinstalls Windows 10 and any apps that came with your PC.It removes:• Personal files• Changes you made to settings• Apps and drivers you installedIf you’re planning to donate, recycle, or sell your PC, use this optionand choose to fully clean the drive. This might take an hour ortwo, but it makes it harder for other people to recover files you’veremoved.Use a recovery drive to reinstall WindowsNote: This process utilizes the USB Recovery Drive that you created in theprevious section "Create a Recovery Drive".1. Connect the recovery drive and turn on your PC.2. On the Choose an option screen, select Troubleshoot - Reset this PC, and thenchoose the reset option that’s best for you.If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personalfiles, apps and drivers you installed, and changes you made to settings. If you repartitioned thedrive Windows is installed on, note that this will restore the drive’s default partitions.Use installation media to reinstall WindowsIf you have installation media, like a Recovery DVD that you purchased fromFujitsu, you can use it to reinstall Windows. You will need to install additionaldrivers and applications after reinstalling Windows.To reinstall Windows, follow the steps below:1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.2. Insert the bootable disc in your DVD drive.3. Highlight the CD/DVD option from the Boot Menu and press Enter .102 Fujitsu
Appendix4. Follow the on-screen instructions to restore the image.• Select the language.• At the Windows Setup dialog window, enter your OS, language and otherpreferences and click Next to continue.• Click Install now to proceed with reinstalling Windows.• At License terms, check on I accept the license terms and click Next.•AtWhich type of installation do you want, click on Custom: Install Windows only (advanced).• Delete all partitions on the drive and click Next. Installation of Windows will start. This willtake some time so please wait until the installation is finished and the system restarts.5. When the system restarts, perform all set-up steps to arrive at the Desktop.6. Connect to the Internet.7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers andapplications to your system. If it is not available, download the software from theFujitsu Support Site, as described below in the "Auto Installation support for thesoftware downloaded from support website" section below.Installation of essential access software1. Insert the bootable disc in your DVD drive.2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Driversfolder in the bootable disc, the computer does not need the essential access software.The recovery image already has the essential access software installed.3. You can now connect to the internet and download FSDM (Fujitsu Software DownloadManager) from the support site and download all the software applicable to themodel and OS using FSDM if they are not downloaded yet.Auto Installation support for the software downloaded from support website1. Download FSDM (Fujitsu Software Download Manager) from the support site and download allthe drivers applicable to the model and OS using FSDM if they are not downloaded yet.2. When the software packages are downloaded from the web, it is important todownload the Auto Installer Software package and the model/language-specificReadme file if you prefer to auto install the software.3. It is important to have the extracted Auto Installer software package folder andReadme file in the same location as the other software folders. Otherwiseauto-installation of the software will not be supported.4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.5. Click Yes on the User Account Control dialog box. This will take some time toprocess the software packages. A message will be displayed during this timestating Please wait while the content is being processed.6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.7. The Fujitsu Software Auto Installer user interface will be launched providing the abilityto auto install the software downloaded from the support site.8. It is recommended that you install all the software in the listed order. You canSelect All, to install the software in the order listed.9. Click the Install button to start the installation.10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.Fujitsu 103
Appendix11. You must restart the system for the settings to take effect. Do you wish to rebootnow? message appears. Select Yes.12. The system will now reboot.Downloading driver updatesTo ensure that you always have the most current driver updates related to your system,you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to viewand download the most current drivers, utilities and applications to determine whetheryou have the latest versions. To download the FSDM utility, go to the support site:"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".104 Fujitsu
IndexIndexAAC adapterconnecting 21Set up 19Acoustic warnings 77Anti-theft protection 57Audio connections 67BBattery 37battery charge 38Caring for and maintaining 37charge level 37Charging 37Discharges too quickly 76see Rechargeable battery 37Service life 37battery charge meter 37before you travel 15BIOS Setup Utility, protecting with password 58calling 68exiting 70operation 69Settings 68Bluetooth, Safety notes 14Bonus Apps 23CCamera 37Charging back-up battery 72Choose a location 19Configuration, BIOS Setup Utility 68Configuring hardware 68Configuring system 68Connecting audio devices 67Connecting headphones 67Connecting microphone 67Cradle 44Connecting a Tablet PC 46, 52Ddark touchscreen 73Date not correct 72Declarations of conformity 89Display orientationselect 28Display Port 62–63DOC (INDUSTRY CANADA) NOTICES 86EEndingenergy saving mode 75EnergyEnergy consumption 38Energy saving 14Energy saving functions 38Error messages on the screen 78ErrorsAcoustic warnings 77Screen messages 78Ethernet LAN 41FFaultElimination 71First-time setup 18GGetting started 18GPS 42HHDMI port 63IImportant notes 13Incorrect time 72Information,safety 13LLandscape formatdisplay 28MMagnetic keyboardConnecting a Tablet PC 49ports 48Making ready to use 21Memory cardhandling 39inserting 39removing 40Mobile operation 15Fujitsu 105
IndexMonitorconnection 64no image 74remains blank 74unstable image 74Monitor connectionsee VGA port 64NNotes 13disposal / recycling 86Energy saving 14touchscreen 27Transport 15OOperating systemactivating system protection 59cancel system protection 59Protecting with password 59PPackaging 18Passwordchanging 58entering 58removing 59Password protection 57hard disk 60Pen 32Portrait formatdisplay 28Ports 44magnetic keyboard 48Power saving 14Power-on Power-on indicator 25Printer does not print 76Problem solving 71RRechargeable batterysee battery 37SSafety information 13Screen connectionsee VGA port 64Security functions 57Security LockAnti-theft protection 57using 57Service life, battery 37Set upDevice 19Setupsee BIOS Setup Utility 68SlotMemory cards 39Status indicators 24Summer time 72Supervisor passwordchange 58entering 58removing 59Suspend/Resume button 25Switching off theTablet PC 26Switchingonforthefirst time 22SymbolsIndicators 24System settings, BIOS Setup Utility 68TTabletoperating 24Tablet PCcannot be started 75doesn’t work 75transporting 15Tablet, operation 24Tablet: Switching on 25Technical dataAC adapter 84The wireless connection to a networkdoes not work 76Time not correct 72Tips 71Touchscreendifficult to read 73notes 27reflected glare 73remains dark 73TPM 61TransportDamage during transportation 18Transportation 15Travel 15Troubleshooting 71Trusted Platform Module 61UUSB charging function 66USB ports 65106 Fujitsu
IndexUser passwordchange 58entering 58removing 59VVGA port 64WWinter time 72Wireless componentsSafety notes 14Wireless LANSafety notes 14Wrong date/time 72Fujitsu 107

Navigation menu