Fujitsu Client Computing WL0003 Pentablet PC ST5010 User Manual Part2
Fujitsu Limited Pentablet PC ST5010 Part2
Contents
- 1. EUT User Guide
- 2. User Manual Part1
- 3. User Manual Part2
- 4. User Manual
User Manual Part2
Appendix B Regulatory Compliance
FCC Part 15 Declaration of Conformity (DoC)
The following equipment:
Product Name: Wireless LAN Card
is herewith confirmed to comply with the requirements of FCC Part 15 rules. The
operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC Rules and Regulations - Part 15
Warning: This device has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
Relocate your WLAN equipped laptop computer.
Increase the separation between the WLAN equipped laptop computer and other electronics.
Connect the WLAN equipped laptop computer into an outlet on a circuit different from that
of other electronics.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The RF ransmission power from the antenna conforms to the general public
FCC limit of SAR(Specific Absorption Rate), 1.6W/kg.
The maximum SAR value measured from this device was 0.36 W/kg.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter.
Canadian Notice
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject
to licensing."
WARRANTY
Users are not authorised to modify this product. Any modifications invalidate the Warranty.
This equipment may not be modified, altered or changed in any way without signed written permission
From Fujitsu. Unauthorised modification will void the equipment authorisation from the FCC and
Industry Canada and the warranty.