Fujitsu F-01A Fujitsu F-01A Cellular Phone User Manual docomo F 01X E eps
Fujitsu Limited Fujitsu F-01A Cellular Phone docomo F 01X E eps
Fujitsu >
Contents
User manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1001415 |
| Application ID | bPu00Svf1OOwp55HOL9b5w== |
| Document Description | User manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 219.27kB (2740932 bits) |
| Date Submitted | 2008-09-16 00:00:00 |
| Date Available | 2008-11-13 00:00:00 |
| Creation Date | 2008-09-05 14:17:40 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2008-09-08 09:20:45 |
| Document Title | docomo_F-01X_E.eps |
| Document Creator | Adobe Illustrator(R) 12 |
| Document Author: | YIT2_103 |
F-01A_E1kou F-01A.book Page 20 Tuesday, September 2, 2008 6:34 PM ◆ Important precautions Waterproofness F-01A is waterproof to IPX5 (former JIS protection code 5)*1 and IPX7 (former JIS protection code 7)*2 standards if the external connection jack cap is strictly closed as well as the back cover is mounted and locked. *1 IPX5 means that F-01A phone keeps functioning after directly applying a jet flow of 12.5 L/ min. for at least 3 minutes from a distance of 2.5-3 m on a rotating turntable. *2 IPX7 means that F-01A phone keeps functioning after it is slowly submerged to depth of 1 m in static tap water at room temperature, left there for 30 minutes and then taken out. To keep the FOMA terminal waterproof, be sure to observe the points below. ・ Securely close the external connection jack cap and back cover. ・ Make sure that the cap and back cover are completely closed without floating. ・ Before using, make sure that the back cover lever is at the LOCK position. ■ Closing external connection jack cap ❖ Advantages in actual operation ・ You can talk or watch 1Seg programs without using an umbrella in the rain (for rainfall of 20 mm or less per hour). * When your hands or FOMA terminal are wet, avoid installing/removing the back cover or opening/closing the external connection jack cap. ・ You can wash the FOMA terminal by submerging and moving it forth and back in still water in a basin etc. * When washing, use only your hands, not a brush or sponge, with FOMA terminal locked, the back cover installed and the external connection jack cap held in position. ・ You can use the FOMA terminal in a poolside area. Do not put the terminal in the water of a swimming pool. * If FOMA terminal gets wet with water from the swimming pool, wash it as described above. * Do not use FOMA terminal underwater. May cause malfunction. ・ You can use FOMA terminal in a bathroom. Do not put the terminal in the bathtub. * Never put FOMA terminal in hot spring water or water containing soap, detergent or bath powder. * Do not use FOMA terminal underwater. May cause malfunction. 20 Easy Search/Contents/Precautions ■ Installing back cover a Align 8 tabs of the back cover with concaves of FOMA terminal. While pressing the back cover in the direction of a so that there is no gap between FOMA terminal and back cover, slide the back cover in the direction of b to install. Back Cover F-01A_E1kou F-01A.book Page 21 Tuesday, September 2, 2008 6:34 PM b Lock the back cover by sliding its lever in the direction of the arrow. Lever ・ Securely lock the back cover and firmly close the external connection jack cap. ・ Do not use FOMA terminal underwater (including opening/closing and keypad operations). ・ Do not let FOMA terminal get wet with liquids other than water at room temperature.Soap/Detergent/Bath powder Hot spring Ocean water ◆ Precautions Swimming pool Sand/Mud To keep the FOMA terminal waterproof, replacement of parts is required every 2 years regardless of whether FOMA terminal appears normal or abnormal. DOCOMO replaces the parts as a chargeable service. Bring FOMA terminal to a sales outlet such as a DOCOMO Shop. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter. ・ If FOMA terminal gets wet with water or other liquids with the external connection jack cap or back cover open, the liquid may get inside the terminal causing electric shocks or malfunction. Stop using FOMA terminal, turn the power OFF, remove the battery pack and contact a DOCOMO-specified repair office. ・ The external connection jack cap and the rubber packing of the inner lid play an important role for keeping waterproof. Do not remove or scratch them. Also, prevent dust from adhering to them. ・ Do not leave water on FOMA terminal. In a cold region, water may freeze causing malfunction. ・ Do not apply water flow stronger than allowed (e.g., such water flow that gives you pain when applied to your skin directly from a faucet or shower). May cause malfunction though F-01A provides waterproof performance of IPX5. ・ Do not wash FOMA terminal in a washing machine etc. ・ Accessories and optional devices are not waterproof. When watching 1Seg etc. with FOMA terminal installed in the desktop holder, do not use it in a bath room, shower room, kitchen or lavatory even if it is not connected to the AC adapter. ・ Do not put FOMA terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ・ Never try to charge the battery pack when FOMA terminal is wet. ・ Do not poke the microphone, earpiece or speaker with a swab or sharp object. May damage the waterproof performance. ・ Do not leave FOMA terminal wet. May short-circuit the power jacks. ・ FOMA terminal does not float on water. ・ Do not let FOMA terminal fall. It may become scratched causing the waterproof performance to degrade. ・ If the back cover is damaged, replace it. Water may enter inside from a damaged section causing troubles such as electric shocks or corrosion of the battery. ・ Do not leave water on the microphone, earpiece or speaker. Such water may interfere with talking. Easy Search/Contents/Precautions 21 F-01A_E1kou F-01A.book Page 22 Tuesday, September 2, 2008 6:34 PM DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. b Shake FOMA terminal approximately 20 times, firmly holding its hinge section, until there is no more water splattering. ◆ Draining water when FOMA terminal gets wet When FOMA terminal is wet, water may flow out after wiping it off; drain the water following the steps below. a Wipe FOMA terminal surface with dry, clean cloth etc. To drain water off the speaker, shake FOMA terminal with the speaker upward * When draining water from periphery of the back cover, shake FOMA terminal keeping its back cover side upward. 22 Easy Search/Contents/Precautions F-01A_E1kou F-01A.book Page 23 Tuesday, September 2, 2008 6:34 PM c Softly press dry, clean cloth etc., against FOMA terminal to wipe off water remaining in the microphone, earpiece, speaker, keys or hinges. e Wipe off water drained from FOMA terminal with dry, clean cloth etc. * Water, if any, remaining in FOMA terminal may ooze up after wiping off. * Do not wipe off water remaining in concaves directly with a cotton swab etc. ◆ Charging d Remove the back cover and wipe off any drops of water around the inner lid and the rear side of the back cover. After wiping off the water, install and lock the back cover. Removing back cover→P48 ■Installing a in "Installing/Removing battery pack" * Never open the inner lid. Around the inner lid Accessories and optional devices are not waterproof. Check the following before and after charging. ・ Check that FOMA terminal is not wet. If wet, adequately drain FOMA terminal and wipe off water with dry, clean cloth etc. before connecting a desktop holder or opening the external connection jack cap. ・ When charging the battery after FOMA terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting a desktop holder or opening the external connection jack cap. ・ When the external connection jack cap is opened for charging, close the cap firmly after charging. It is recommended that the desktop holder be used for charging to prevent water from seeping inside from the external connection jack. * Never try to charge the battery pack when FOMA terminal is wet. * Do not touch the AC adapter or desktop holder with wet hands. May cause electric shock. * Do not use the AC adapter or desktop holder in a place subject to water. May cause fire or electric shock. * Do not use the AC adapter or desktop holder in a bathroom, kitchen, lavatory or other highly humid area. May cause fire or electric shock. Back side of the back cover Easy Search/Contents/Precautions 23 F-01A_E1kou F-01A.book Page 24 Tuesday, September 2, 2008 6:34 PM Basic package and optional accessories F-01A (including Back Cover F33 and the written warranty) FOMA AC Adapter 01/02 (including written warranty and operation manual) Battery Pack F10 Instruction manual Man ua * Quick Manual is appended on PXXX. CD-ROM for F-01A * The PDF version of "Manual for PC Connection" and "Kuten Code List" are contained in the CD-ROM. Other optional accessories→P442 24 Easy Search/Contents/Precautions Desktop Holder F27 (including operation manual) F-01A_E1kou F-01A.book Page 25 Tuesday, September 2, 2008 6:34 PM Before Using the Handset Names and functions of parts ............................................................................................................................................ Available FOMA terminal usage styles ............................................................................................................................. Display overview ................................................................................................................................................................. Sub-display/Light overview ............................................................................................................................................... Selecting functions from menu .......................................................................................................................................... Selecting function in flip style ...................................................................................................................... Touch panel Pointing operation using fingerprint sensor ......................................................................................... Pointing device Using motion sensor ........................................................................................................................................................... Using UIM (FOMA card) ...................................................................................................................................................... Installing/Removing battery pack ..................................................................................................................................... Charging ............................................................................................................................................................................... Checking remaining battery level ............................................................................................ Remaining battery level Turning power ON/OFF ........................................................................................................................... Power ON/OFF Switching to English .............................................................................................................................. Select language Setting date and time ................................................................................................................................... Date & time Notifying your phone number to the other party ........................................................................ Caller ID notification Checking your own phone number ..................................................................................................... User information 26 29 30 33 36 39 44 45 46 48 50 53 53 55 55 56 56 25 F-01A_E1kou F-01A.book Page 26 Tuesday, September 2, 2008 6:34 PM Names and functions of parts 26 Before Using the Handset a Earpiece Hear other party's voice from here. b Light sensor Sense the ambient luminance (automatic adjustment of the brightness of the display). * Blocking the light sensor may disable correct adjustment of the brightness. c Display → P30 d Microphone Send your voice from here. * Do not cover with your finger while talking or recording sound. * The rear microphone is used for reducing noise. It does not pick up your voice. e 1Seg antenna → P231 * The terminal has a built-in 1Seg antenna. For better signal reception, do not cover the antenna with your hand. f Call light → P35 g Sub-display → P33 h Mail light → P35 i Light → P112 Turn on or blink when activating Lock on close, shooting an image, recording a movie, operating Music&Video Channel player or Music player operate according to the settings of Indicator light or Light alert. j FOMA Built-in antenna * The terminal has a built-in FOMA antenna. For better voice quality, do not cover the antenna with your hand. k Light/Shooting indication light → P75, 218, 355 Camera light for videophone calls, still image shooting, movie recording, simple light, or it turns on or blinks for still image shooting or movie recording. F-01A_E1kou F-01A.book Page 27 Tuesday, September 2, 2008 l Fingerprint sensor → P44, 118 Operation of pointing device, register/authenticate fingerprint m Infrared data port → P333, 337 Infrared communication, Infrared remote control. n FeliCa mark → P282, 333 Installation of IC card * You can use Osaifu-Keitai by placing it over IC card reader or send/receive data by iC transmission. The IC card cannot be detached. o Speaker Hear ring alert or voice of the caller using the speakerphone etc. from here. p Camera Shoot still images or movies, send images over a videophone call. q Back cover * Remove the back cover and the battery pack to access microSD card slot.→P321 r Back cover lever → P48 s Charging jack t Strap opening (2 openings) u External connection jack Connecting Earphone/Microphone with Switch→ P364 6:34 PM The functions available by pressing keys are as below. ● : Press ■ : Press for 1 second or more a mMENU key ● Display menus, perform the operation shown at the upper left of the guide area. ■ Start/Cancel side key hold. b Ii-mode/i-αppli/▲ (scroll)/Character ● Display i-mode Menu. ● Scroll upward the mail screen or site/website display by pages. ● Perform the operation shown in the lower-left corner of the guide area, switch character entry modes. ■ Display i-αppli folder list. c cch/α/Clear key ● Display i-Channel list, switch i-αppli stand-by display and i-αppli activation. ● Delete characters or return to previous screen. ■ Start/Cancel Self mode. d nStart a voice call/ /Speakerphone/AF key ● Make/Receive a voice call, return to the previous character while entering characters. ● Switching the speakerphone function, start/ cancel auto-focus. ■ Make a voice call using the speakerphone function. ■ Restore the character string to its previous state. e Keypads 1-9 ● Enter phone numbers (1-9) or characters, select menu/items. ■ Perform the function registered in Custom menu. ● Enter phone number (0) or characters, select menu/items. ■ Use Auto switch of Int'l call assist when making international calls. f *＊/A/a/Line feed/Public mode (Drive mode) key ● Enter "＊", "゛", "゜", etc., switch upper/lower case. ● Line feed while entering characters, select menu/ items. ● Switch display/hide of guide area when shooting a still image. ● Switch horizontal and vertical displays while playing movie/i-motion. ■ Start/Cancel Public mode. g Ti-Widget/TV key ● Activate i-Widget. ■ Watch 1Seg or switch Multi window. h USearch key→P345 ● Enter the target word, place or name and search. i Multi-cursor key gEnter key ● Perform the operation, activate Focus mode. ■ Start i-αppli registered for one-key shortcut. uSchedule/↑ key ● Display Scheduler. ● Adjust volume, move the cursor upward. ■ Display alarm list. dPhonebook/↓ key ● Display phonebook. ● Adjust volume, move the cursor downward. ■ Add to the phonebook. lReceived calls/← (previous) key ● Display Received calls, switch displays, move the cursor leftward. ■ Start/Cancel privacy mode when "Activate/ Deactivate" of Activation option is set to "Hold Lcursor key". rRedial/ →(next) key ● Display Redial, switch displays, move the cursor rightward. ■ Start/Cancel IC card lock. * May be described as jhk. Before Using the Handset 27 F-01A_E1kou F-01A.book Page 28 Tuesday, September 2, 2008 j CCamera key ● Start still image shooting, perform the operation shown at the upper right of the guide area. ■ Start movie recording. k aMail/▼ (scroll) key ● Display mail menu, perform the operation shown at the lower right of the guide area. ● Scroll downward the mail screen or site/website display by pages. ● Press 2 times : Check new message ■ Display mail creation screen l fPower/End key ● Terminate on-hold, calling/operating function, display/hide calendar layout. ■ Press for 2 seconds or more : Turn power ON/ OFF. m ##/Macro shooting/Silent mode key ● Enter "＃", "、", "。", "?", "!", "・", select menu/ items. ● Turn Macro mode on or off while using the camera. ■ Start/Cancel Silent mode. n sMultitask key ● Perform another function while talking or operating (Multiaccess/Multitask). o Side keys PPushTalk/REC key ● Operate PushTalk or execute menu items on the sub-display. ● Save a still image during 1Seg watching. ■ Start/Stop video recording during 1Seg watching. MMusic key ● Display the menu on the sub-display, operate Music&Video Channel player or Music player. ● In flip style, show/hide menu. ■ Start/End Music player. ■ In flip style, display the Multitask menu. 28 Before Using the Handset 6:34 PM ● Stop ring alert, alarm sound or vibrator. ● Adjust volume*1, increase volume during a call or PushTalk session (decrease volume in flip style). ● Turn sub-display light on, switch display or select menu item while FOMA terminal is folded. ■ Activate the quick answer machine while receiving a call, activate/stop voice memo or movie memo during a call. ■ With FOMA terminal folded, start/cancel Silent mode*2, with FOMA terminal open, start Ans.Machine&Voice memo on stand-by display. ● Adjust volume*1, decrease volume during a call or PushTalk session (increase volume in flip style). ● Turn sub-display light on, switch display or select menu item while FOMA terminal is folded. ■ Check new messages when FOMA terminal is folded *2, mute while watching 1Seg or playing video when the terminal is open, check new messages on the stand-by display. *1 This function is not available when playing i-motion in flip style. *2 The setting of Side key shortcut is the operation in the default state. Note that it does not operate in the flip style. F-01A_E1kou F-01A.book Page 29 Tuesday, September 2, 2008 6:34 PM Available FOMA terminal usage styles With this FOMA terminal, in addition to "Normal style" in which the terminal is open, you can use "Flip style" in which the display is rotated out. ･ This guide uses "Normal style" to describe operations unless especially noted. ■ Flip style You can use FOMA terminal with the display rotated out. ･ Operations in flip style→P39 a Open FOMA terminal and rotate the display clockwise 180 degrees until it stops ■ Folded You can obtain information from the sub-display or the light. ･ Carry FOMA terminal in this status. b Fold the display forward ■ Normal style This basic style is suitable for all functions. * To restore normal style, raise the display and rotate it counterclockwise 180 degrees until it stops. ✔INFORMATION ･ To switch to flip style, do not rotate the display counterclockwise or rotate beyond 180 degrees. Also, do not allow a corner of the display to touch the terminal or keys. Doing so may scratch or damage them. * You can talk over a videophone call looking at the other party's image after rotating the display clockwise 180 degrees to face the camera toward you in normal style.→P76 Precautions on rotating display ･ Take care to avoid catching your fingers when switching to flip style. Before Using the Handset 29 F-01A_E1kou F-01A.book Page 30 Tuesday, September 2, 2008 6:34 PM Display overview The current state can be checked by the icon appearing on the screen. a-m : Unread i-mode mail and SMS storage space is full on UIM : Unread i-mode mail and SMS storage space is full : SMS storage space is full on UIM : Unread i-mode mail and SMS exist : Unread i-mode mail exists : Unread SMS exists : There is information about unread i-concier (red)/ (blue) : Unread MessageR storage space is full or unread MessageR exists : There is unread mail and information about unread i-concier (red)/ (green) : Unread MessageF storage space is full or unread MessageF exists : Battery icon→P53 : Signal level icon→P53 : Out of service area→P53 : Self mode ON→P123 : Data transfer mode ON*1 →P129, 321, 333, 369 / : In i-mode (during i-mode connection)/(during packet communication)→P180 : In infrared communication→P333 Infrared remote control in operation→P337 (blue)/ (gray) : Bluetooth power ON/Power saving mode activated : The total calls cost exceeds the limit→P359 *2 o-z Normal style (Stand-by display) a-k : Bluetooth connection established→P367 : Communication using handsfree-compatible device in progress→P369 : Communication using a Bluetooth handsfree device in progress→P369 : Communication using a Bluetooth headset in progress→P61 : Speakerphone function in use→P61 : Power saving mode activated→P107 (blue)/ (red)/ / : Network in use→P398 *2 仮 *2 : Positioning with GPS→P292 (blue)/ (gray) : Location request setting with GPS/Out of permission period→P301 : A phonebook entry or schedule has secret attribute→P93, 352 h Unread Area Mail, unread mail, information of iconcier or MessageR/F state→P151, 169, 171, 174, 200 : Unread Area Mail Flip style (Folder list screen) 30 Before Using the Handset *2 i PushTalk state or storage state in i-mode Center→ P79, 151, 169 : During PushTalk session : Downloading phonebook page on the network : i-mode mail and MessageR/F storage are full or one of these spaces is full and unreceived mails exist in Data Center : i-mode mail or MessageR/F storage space is full in Data Center : Unreceived i-mode mail and MessageR/F exist in Data Center : Unreceived i-mode mail, MessageR or MessageF exists in Data Center *2 : Displaying SSL page/Executing SSL session with i-αppli or using i-αppli downloaded from SSL page→P181 Displaying an SSL/TLS page→P202 : Mail failed to Auto-send exists→P150 F-01A_E1kou F-01A.book Page 31 Tuesday, September 2, 2008 : Auto-send mail exists→P150 : Music&Video Channel program obtaining reservation exists→P247 k i-αppli/i-αppliDX state→P261, 276 : During i-αppli operation (gray) : i-αppli stand-by display ON (orange) : i-αppli is being started from the i-αppli stand-by display : i-αppliDX is running (gray) : i-αppliDX stand-by display ON (orange) : i-αppli is being started from the iαppliDX stand-by display : i-αppli call received while i-αppli is running (gray) : i-αppli call received while displaying iαppli stand-by display (orange) : i-αppli call received while i-αppli is being started from i-αppli stand-by display : i-αppli call received while i-αppliDX is running (gray) : i-αppli call received while displaying iαppliDX stand-by display (orange) : i-αppli call received while i-αppli is being started from i-αppliDX stand-by display : i-αppli call received 6:34 PM *3 *2 : Inside OFFICEED area→P394 : Arrival information→P39 : Shortcut icons→P353 : Silent mode ON→P101 : Personalized silent mode ON→P101 : Call alert volume is Silent→P98 : Vibrator for voice call ON→P99 : Call alert volume is Silent and vibrator for voice call ON→P99 : In Public mode (Drive mode)→P72 : Answer machine ON/recorded messages full→P73 *2 : Keypad dial lock ON→P125 : Side key hold ON→P130 *2 : Location request of GPS success/ failure/end as unanswered→P300 : Personal data lock ON→P124 : Music&Video Channel obtaining failure/ success→P247 : 1Seg recording reservation completed/ failed→P241 *3 : Alarm clock ON→P347 : 1Seg watching/recording reservation, schedule reminder ON→P239, 349 : Schedule reminder or 1Seg watching/recording reservation and alarm clock are simultaneously ON→P239, 347, 349 *1 When data transfer mode is activated, the terminal is in the same state as out of service area and Multitask becomes unavailable. *2 The current highest-priority item is displayed. These icons are listed in descending order of the priority from the top. *3 Time appears on a screen other than the stand-by display. : Reading UIM→P46, 53 (key is yellow) : IC card lock ON→P288 : Individual IC card lock→P289 : Displaying available multi-cursor key in Focus mode→P39 : Lock on close ON→P131 : Remote control in progress : Performing 1Seg recording reservation/1Seg recording (only watching stopped)→P238, 241 : i-αppli Auto start failed→P274 x State of USB mode settings and microSD card→ P321, 328 : microSD card installed during Communication mode (blue)/ (gray) : microSD card installed or not during microSD mode (blue)/ (gray) : microSD card installed or not during MTP mode *2 : Connected to external device using USB cable→ P78, 328 : Pedometer ON→P363 *2 : Software update notice→P455 : Software update pre-specified→P456 : Update notification icon→P455 : Auto-update of the latest pattern definition failed/succeeded→P458 ✔INFORMATION ･ Depending on the displayed function, an icon may be displayed at a different position, or some or all icons may not be displayed. Before Using the Handset 31 F-01A_E1kou F-01A.book Page 32 Tuesday, September 2, 2008 6:34 PM ◆ Task area The icon indicating the function (task) in progress appears in the task area. During Multiaccess or Multitasks, the icons show which functions are running. Task area ❖ Icons indicated on the task area : Voice call : Received calls : Redial : Answer machine/Voice memo : Videophone call : Videophone using an external device : Call (switching) : Call (disconnecting) : PushTalk : FOMA terminal phonebook : Contact setting of Privacy mode : Kisekae Tool : Still camera : Movie camera : Bar code reader : i-mode : i-mode Bookmark/Go to location/Browser history/Screen memo/two-touch site :i-concier : Mail/MessageR/F : Area Mail : Receiving i-mode mail : Inquiring for i-mode mail/SMS : Sent msg log/Received msg log : Receiving SMS : i-αppli : ToruCa : Position location of GPS : Location request of GPS 32 Before Using the Handset : Notify location of GPS : Location history (GPS) : Full Browser : 1Seg : My Picture : Movie/i-motion : Chara-den : Melody (blue)/ (gray) : Accessing microSD card/Standing by for accessing : Activating Music&Video Channel : Music&Video Channel program obtaining : Music player : Sound recorder : My Document (PDF data) : Other (Word, Excel, PowerPoint file) : Adjusting volume by Multitask : Countdown timer : Alarm clock : Scheduler/Schedule reminder ringing (including activation notification of 1Seg) : Fake call : User information : Calculator : Pedometer : Search engine : Notepad : Dictionaries : Bluetooth : Packet transmission or communication/Sending or receiving packets in progress via Bluetooth : 64K data communication via Bluetooth : Accessing Data Center : Displaying synchronization log : Network services set : Calling or communicating packets via USB/Sending or receiving packets via USB : 64K data communication : Accessing external data : Updating software/Software update notified F-01A_E1kou F-01A.book Page 33 Tuesday, September 2, 2008 6:34 PM : Updating pattern definition/Displaying version / (gray) : Each function set or on hold ◆ Guide area Operations that can be performed by pressing m, I, g, C and a are displayed in the guide area. Displayed operations vary by the screen. Display locations and keys correspond as shown in the figure. Guide area b Pressing the keypads corresponding to the item number or pressing the keys below allows you to select an item. :S :* :# :D :M c indicates that there are items that can be selected above and below the cursor position. Press j to move the cursor. When d is pressed on the last item of the page, the next page appears, when u is pressed on the first item of the page, the previous page appears. indicates that there are items that can be selected over the multiple pages. Press h to change the page. Some screens such as an icon selection screen cannot be switched. Sub-display/Light overview With sub-display or light of FOMA terminal, various information or states can be checked. ･ on the guide area corresponds to multi-cursor keys k (It may be different depending on the function you are using or how the site or website is made). ◆ List screen a When a list extends to multiple pages, the currently displayed page number and the total number of pages appear. ◆ Displaying sub-display When FOMA terminal is folded, the sub-display shows icons or messages. Selecting a menu item or displaying detail information of a missed call or unread message is also available. ･ When a missed call or unread mail exists, animation that notifies you of accumulated information appears when folding FOMA terminal. The clock appears after the animation stops or by pressing SD or P while the animation is displayed. Design of animation differs according to the setting of "Clock style" of Clock & alert image. ･ In All lock, Omakase Lock or Side key hold, pressing one of SD, P or M shows a message indicating the lock is set, and after a period of time, the display is switched to the clock display screen. ･ When FOMA terminal is folded, sub-display light turns on. If no operation is performed for approximately 15 seconds, light turns off, but it turns on again if one of SD, P or M is pressed. When Auto light on of Sub-display is set to "ON", picking up or tilting FOMA terminal turns light on. ･ When opening FOMA terminal with information displayed on the sub-display, the display disappears. Before Using the Handset 33 F-01A_E1kou F-01A.book Page 34 Tuesday, September 2, 2008 6:34 PM ･ By pressing P while watching/recording 1Seg, playing video or activating Music player or Music&Video Channel player, you can display clock. ❖ Displayed icon or state a bcd e f g h i j kl m Icon and date/time State display (e.g. : While Alarm clock is emitting) : Battery icon : Signal level icon : Out of service area : Self mode ON : In data transfer mode c / : In i-mode communication (connected to i-mode site)/(packet communication) d : Silent mode ON : Personalized silent mode ON : While playing Music player : While watching 1Seg e / : Location request setting with GPS/Out of permission period f : Bluetooth power ON (blinks during communication) : Bluetooth power saving ON g : IC card lock ON : i-αppli call i / : Auto-send mail exists/Failed auto-send mail exists : Information about unread i-concier exists k / : i-mode mail or MessageR/F exists in the Center/Storage space in full l : Missed calls/Recorded messages/Voice messages in Voice Mail service exist / / : Unread Area Mail exists/Unread i-mode mail and SMS exist/Storage space is full / : Unread MessageR exists or unread MessageR storage space is full / : Unread MessageF exists or unread MessageF storage space is full ･ Displayed in smaller size when unread i-mode mail or SMS exists. n The clock is displayed according to the settings of "Clock style" of Clock & alert image. 34 Before Using the Handset ･ When pedometer is activated, the number of steps and walked distance for the day appear. o The states below are notified by message or image. ･ State display of voice call, videophone call (including Chaku-moji and voice messages in Voice Mail service), PushTalk, recorded message ･ While i-mode mail, SMS or Message R/F is being checked for or received, Area Mail or i-concier is being received ･ State display of Position location, Location request, Notify location function of GPS ･ While watching /recording 1Seg, playing video, playing melody, activating Music&Video Channel player, activating Music player or using microSD card ･ While alarm clock or schedule reminder (including activation notification of 1Seg) is sounding, Countdown timer is operating/sounding ･ Status display of packet, 64K, USB, infrared or Bluetooth communication ✔INFORMATION ･ Because of the characteristics of surface panel, sub-display may not be seen clearly at places in the sunlight. In this case, check the display in the shade, or make a shadow with your hand to check the display. F-01A_E1kou F-01A.book Page 35 Tuesday, September 2, 2008 6:34 PM ❖ Selecting functions from the menu of sub-display ❖ Displaying missed call or unread mail You can select from 7 functions : Activate/End Music player, Lock/Unlock IC card, Silent mode ON/OFF, Check new msg, Quick light, Fake call and Bluetooth ON/OFF. ･ While IC appli is activated, you cannot perform IC card Lock/Unlock. Performing i-mode inquiry When missed calls, recorded messages, unread messages, unread MessageR/F or voice messages in Voice Mail service exist, turn on the sub-display light and press D to check the number of these items. Pressing [▲] while checking the number of items displays the detail information for approximately 5 seconds (except voice messages in Voice Mail service). ･ Up to 10 detail information can be checked by pressing D. Switching to detail information of missed calls clock is displayed, MeUsing SD, move the cursor to "Check 1 While new msg"eP 仮 Cursor ･ While the menu is displayed, press M to return to clock display or state display of running function. ･ Authentication is required when "Unlock IC card" is selected. 1 S while confirming the number of items The number of items, total number of items, receive date/time, and the caller information are scroll-displayed. ◆ Displaying call light and mail light Call light and mail light on sub-display blink in the cases below. (Call light) : When unchecked missed call exists (Mail light) : When unread message exists ･ Effective when Indicator light is set to "ON". ･ Checking missed call or arrival information stops blinking. ◆ Displaying light ･ Turn on or blink in the cases below. - When receiving a call, mail/i-concier information, calling, obtaining ToruCa or accessing IC card - When opening/closing FOMA terminal or GPS positioning (Position location, Notify location and Location request) - When activating Lock on close, shooting still image or movie, operating Music&Video Channel player or Music player - When alarm clock, schedule reminder or countdown timer is sounding - During iC transmission ･ For some functions, operation is performed according to Light alert setting. Before Using the Handset 35 F-01A_E1kou F-01A.book Page 36 Tuesday, September 2, 2008 6:34 PM ❖ To switch the menu screen temporarily Selecting functions from menu ◆ Menu screen and switching method In each menu screen, you can temporarily switch to a different menu screen by the operations below. You can also set which menu to display when pressing m on the stand-by display.→P108 C*1 ❖ Menu screen The menu screen below is available. Kisekae menu : A menu that you can change the design using Kisekae tool. In addition to menus compatible with movies, "拡大メニュー (AdvancedMode)" that is easy to view with large font and "Simple Menu" are available. A Kisekae menu matched with the color of FOMA terminal is set by default. ･ Some Kisekae menu changes the menu structure according to usage frequency. In the Kisekae Tool stored by default, "ダイレクトメニュー (Direct menu)" in the "Preinstalled" folder supports this function. ･ Some Kisekae menu does not support English display when setting Select language to "English". Basic menu : A basic menu that the menu structure and menu numbers are fixed. ･ Menu icons or background design can be changed by customizing Kisekae Tool or menu.→P108, 111 ･ The font size of the menu changes synchronized with Kisekae Tool. Custom menu : A menu that menu items can be freely registered.→P354 C*2 仮 Basic menu 仮 Kisekae menu Custom menu *1 Cannot be switched when Kisekae menu or Shortcut menu is set as Select startup menu. *2 Cannot be switched when Basic menu is set as Select startup menu. ✔INFORMATION ･ Some types of Kisekae menus change the menu structure according to usage frequency. Also, the number assigned to menu item (item number) may not be applied. ◆ Selecting a function Press m in stand-by and select and perform the functions from the menu displayed. There are 2 ways. One method involves using the keypad corresponding to the menu items (Shortcut operation). In the other method, the multi-cursor key is used to select from among the menu items. ･ If any function is restricted by lock functions or no UIM is installed, icon appears or the font color changes indicating that the function is disabled. Note that the display does not change for Kisekae menu or Basic menu. When a function is selected, the reason that the function cannot be performed etc. is displayed. 36 Before Using the Handset F-01A_E1kou F-01A.book Page 37 Tuesday, September 2, 2008 6:34 PM ･ Function description about the menu item at the cursor position may appear for some types or levels of the menu. The current setting may also displayed in some menu items. ❖ Selecting menu items by keypad (Shortcut operations) ❖ Selecting menu items by multi-cursor key Selecting "Calculator" 1 meMove the cursor to "Accessory"eg When numbers (item number) are assigned to menu items, a menu item can be selected by pressing the corresponding keypad (1-9, 0, *, #). ･ Press the item number displayed with the preferred menu item. ･ Item numbers differ when "Simple Menu" is set by Kisekae Tool. ･ Item number of the menu→P412 Selecting "Calculator" 仮 Cursor position 1 m74 Kisekae menu Basic menu ･ If you press k to move the cursor, the color and/or design of the cursor position change. Moving by h is unavailable for some menus. ･ When setting "Simple Menu" for Kisekae menu, you can select menu (to the second layer) also by placing the cursor and pressing r. 2 Move the cursor to "Calculator"eg ❖ To return to stand-by display or previous menu After selecting a menu item, you can return to the stand-by display or previous menu by pressing the keys below. f : Return to the stand-by display. c : Return to the previous menu. Depending on the menu, you can return to the previous menu also by pressing l. Before Using the Handset 37 F-01A_E1kou F-01A.book Page 38 Tuesday, September 2, 2008 6:34 PM ◆ Selecting method of submenu When "MENU" is displayed at upper-left of the guide area, various operations can be performed with submenus. Selecting the redial submenu ■ Pulldown menu operation Move the cursor to the item to set and press g, and then press the keypads corresponding to the item number. Pulldown menu the redial list screen, mePress a keypad for the submenu item 1 On number ･ You can also select an item by moving the cursor to it and pressing g. ■ Check box operation Press the keypads corresponding to the item number. There are menu items in lower level ･ You can also select an item by moving the cursor to and pressing g or r. ･ Item numbers of the submenu with the same functions may vary by the operating screen. ･ Pressing m or c closes the submenu. ◆ Operating procedure of each item ･ You can also select an item by moving the cursor to it and pressing g. ･ Pressing keypad for the item number or pressing g after placing the cursor, the check box switches (Select) and (Cancel). ･ For some functions, you can select or cancel all items by pressing m. ■ Confirmation screen operation If a confirmation screen for performing functions appears while deleting, setting data, etc., move the cursor to "Yes" or "No" and press g. ■ Selection of an item When numbers or is displayed, press the corresponding keys. You can also select an item by moving the cursor with k and press g. When moving the cursor, item at the cursor position may be framed or change in color. ･ For some functions, items other than "Yes" or "No" may appear. ･ Depending on the function, you can check vibration pattern of the vibrator, color or lighting pattern of light alert, the color scheme of screen settings or brightness of the display by moving the cursor to an item. 38 Before Using the Handset F-01A_E1kou F-01A.book Page 39 Tuesday, September 2, 2008 6:34 PM ◆ Displaying information quickly ･ You can perform the same operations when the next icon appears. When g is pressed on the stand-by display with arrival information icon or iconcier information displayed, or with Info/calendar layout or Shortcut icons set, the display is changed to Focus mode that allows you to quickly display the related information. ･ i-concier information→P200 ･ Shortcut icons→P353 ･ When i-concier information is displayed with Info/calendar layout set, the cursor cannot be moved to Info/calendar layout. - : Connect to external device using USB cable : Software update advance notice/notification : Auto-update of latest pattern definition success/failure : Location request success/failure/end as unanswered : Music&Video Channel program obtaining success/failure : 1Seg recording reservation completion/failure : Performing 1Seg recording reservation/1Seg recording (only watching stopped) : Pedometer Canceling Focus mode : c or f 1 geMove the cursor to an iconeg An icon at the cursor position is surrounded with a red frame. The direction is indicated that it can be moved to by using multi-cursor key. ✔INFORMATION ･ When moving the cursor to the icon for arrival information and press c for 1 second or more, the icon disappears temporarily. For a voice message icon of Voice Mail service, a confirmation screen appears asking you to delete the display. Select "Yes" to delete the display. It reappears when the number of items is changed by accumulating new information or viewing existing information. ･ In Focus mode, you cannot display the menu by pressing m. ･ A screen matched for the selected icon appears. (Missed calls) : Received call list appears. With 2in1 set to Dual mode, appears when there is a missed call only to Number B and appears when there are missed calls to both Number A and B. (Recorded messages) : The recorded message list appears. (Voice messages in Voice Mail service) : A confirmation screen for playing message appears. With 2in1 set to Dual mode, appears when there is a message only to Number B and appears when there are messages to both Number A and B. (Unread messages) : The folder list of Inbox appears. (Unread ToruCa) : The ToruCa list of the folder containing the latest unread ToruCa appears. (i-αppli call) : i-αppli call log appears. Touch panel Selecting function in flip style In flip style, you can activate Still camera, Movie camera, Full Browser,1Seg image/ video, Activate 1Seg, My Picture, i-motion, My Document (PDF data) and Other Document (other documents) from flip menu. You can also view mail, answer a call or PushTalk call, stop alarms, perform Location request or Notify location, etc. You can select a function by touching the display with your finger (touch operation) or using side keys. ･ The display is used horizontally all the time. ･ You can also operate functions or view mail that can be activated from flip menu after changing the style from normal to flip style during the operation. ･ Images, movies/i-motion, PDF files and other files (Word, Excel or PowerPoint) are always displayed in Full screen in flip style. ･ If message indicating that function you attempted to use is not available in flip style appears, return the terminal to normal style. ･ Pointing device, motion sensor (except the change in Flash graphics or scrolling the Full Browser screen) and operations set in Side key shortcut do not work in flip style. Before Using the Handset 39 F-01A_E1kou F-01A.book Page 40 Tuesday, September 2, 2008 6:34 PM ･ Do not scrape with your finger or use a pointed object such as a pen on the ◆ Touch operation ･ Touch operation is enabled in the range below. Touch the display with the ball of your finger. display. Doing so may cause scratches on the display or malfunction of the sensor. ◆ Flip menu Effective area ❖ Displaying flip menu If changing style from normal to flip while stand-by display or a menu screen is displayed, flip menu appears. Flip menu also appears if the running function is terminated while in flip style. ･ Types of touch operations are as described below. Required operation varies depending on functions or screens. Touch : Touch the display lightly and release the finger. Double-touch : Touch the display lightly twice and release the finger. Slide : Keep touching the display, move your finger up, down, right or left and release the finger. Slide quickly : Touch the display slightly and flick your finger up, down, right or left. ･ Touch operation may be disabled except for MENU or selecting items depending on screens. On Full-screen display, touch operation on some part of the screen may also be disabled depending on functions used. ❖ Notes for touch operations ･ Touch operations do not work in the cases below. - Operations with a glove, 2 or more fingers, finger nail, pen, ball-point pen or pencil - Operations with a foreign object placed on the display ･ Note that the actions below may cause malfunction. - Hitting the display with a metal object or jewelry - Allowing water drops or dust to get on the display, allowing the display to get wet or dirty, or touching the display with a sweaty finger - Moving a finger too quickly - Attaching protect sheet or label on the display ･ Do not use excessive force. It may cause injury or damage. 40 Before Using the Handset a b c d e f Flip menu a Still camera Activate Still camera. b Movie camera Activate Movie camera. c Full Browser Display Full Browser screen from "Home", "Bookmark" or "Browser history". ･ The menu has 2 levels. d 1Seg image/video Display "1Seg" in Data Box. e Activate 1Seg Start Activate 1Seg. f My Picture Display "My Picture" in Data Box. g i-motion Display "i-motion" in Data Box. h My Document Display "My Document" in Data Box.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2008:09:08 09:20:45+09:00 Create Date : 2008:09:05 14:17:40+09:00 Metadata Date : 2008:09:08 09:20:45+09:00 Creator Tool : Adobe Illustrator(R) 12 Format : application/pdf Title : docomo_F-01X_E.eps Creator : YIT2_103 Document ID : uuid:49b934f2-20f2-48ae-91d3-4e3630dc22ac Instance ID : uuid:30e812e4-c89d-400c-8913-5c7ee3fd616e Producer : Acrobat Distiller 5.0.5 (Windows) Has XFA : No Page Count : 21 Author : YIT2_103EXIF Metadata provided by EXIF.tools