Contents
- 1. manual1
- 2. manual2
manual2
F-05C_EN_ninshou Usage style Introduction You can use the FOMA terminal function even when the FOMA terminal is closed. ・ ・Slide the FOMA terminal upward (open the FOMA terminal) to use in slide style. To use in closed style, slide in the reverse direction (close the FOMA terminal). ・ All key operations are available in slide style. In closed style, menu operations, power ON/Off operation can be done. ・ In closed style, vertical and horizontal views can be switched according to tilt of the FOMA terminal by the auto rotation in Motion sensor. Point ・ Do not give excessive force when opening/closing the FOMA terminal. It may cause malfunction or damage of the keypad or the display. ・ Do not close the FOMA terminal with the strap held inside. It may cause malfunction or damage. ・ Do not put label, sticker, etc. on the back side of the display or the keypad side. It may cause malfunction or damage. ・ When you carry the FOMA terminal, close the FOMA terminal and activate Operation lock to avoid erroneous key operation and save battery consumption. ・ Do not place the terminal with the face of display downward on a desk etc. It may cause scratch on the display surface. ・ When you put the terminal in a bag etc., be careful not to have a scrape on the display by solid object. It may cause scratch, malfunction or damage. Information ・ You can set to view editing screen etc. by opening the FOMA terminal 【 スライド編集設定 (Slide and edit)】or answer an incoming voice call by opening the FOMA terminal 【 着信オープン応答 (Open and answer)】. F-05C_EN_ninshou Precautions (ALWAYS FOLLOW THESE DIRECTIONS) ・ Before using the FOMA terminal, or when necessary, read the DANGER WARNING CAUTION This sign denotes that death or serious injury may directly result from improper use. This sign denotes that death or serious injury may result from improper use. This sign denotes that minor injury or damage to property may result from improper use. ・ The symbols below show specific directions. This symbol denotes that the action is prohibited. Don’t No disassembly No wet hands No liquids Do Unplug This symbol denotes that disassembling the phone or its components is not allowed. Introduction precautions below to ensure safe use and handling. After reading this manual, keep it carefully. ・ These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. ・ The signs below differentiate between the levels of danger that can occur if the product is not used within the specified guidelines. This symbol denotes that using the phone or its components with wet hands is not allowed. This symbol denotes that using the phone or its components in a bathroom or other highly humid area is not allowed. This symbol denotes that an instruction must be obeyed at all times. This symbol denotes that the equipment should be unplugged. ■ Precautions contain the description below. Handling FOMA terminal, battery pack, adapter, UIM and touch pen (common) .....................................................................................................................................8 Handling FOMA terminal...................................................................................... 9 Handling battery pack ......................................................................................... 10 Handling adapter................................................................................................. 11 Handling UIM....................................................................................................... 12 Handling touch pen............................................................................................. 12 Handling mobile phones near electronic medical equipment ........................ 12 F-05C_EN_ninshou Handling FOMA terminal, battery pack, adapter, UIM and touch pen (common) Introduction DANGER Do not use, store, or leave the equipment in hot areas such as near Don’t flames or in areas under strong direct sunlight such as inside a vehicle. Keep conductive materials (metal pieces, pencil lead, etc.) from coming Don’t in contact with the charging jack or external connection jack. Do not put those materials inside the terminal. Do not cover or wrap the terminal with a blanket, etc while using or Don’t charging. Do The gas may catch fire. When using Osaifu-Keitai in a place as a gas station, turn OFF the terminal before using it. (When IC card lock is activated, deactivate it before turning OFF the terminal.) Do not disassemble or remodel the equipment. No disassembly May cause fire, burns, injuries, electric shock. May cause fire, burns, injuries, electric shock. Do Use the battery pack and adapter specified by NTT DOCOMO for your FOMA terminal. Failure to do so may cause fire, burns, injuries, electric shock. WARNING Do not throw the equipment or give hard shock to it. Don’t May cause fire, burns, injuries, electric shock. Turn FOMA terminal OFF and stop charging before entering a place such as a gas station where flammable gases are generated. Do If the equipment starts giving off a strange smell, overheats, becomes discolored or deformed during use, charging or in storage, immediately perform the following operations. ・ Remove the power plug from the wall outlet or cigarette lighter socket. ・ Turn FOMA terminal OFF. ・ Remove the battery pack from FOMA terminal. Failure to do so may cause fire, burns, injuries, electric shock. The terminal may fall and cause injuries. Do not store the equipment in extremely humid, dusty or hot areas. Don’t May cause fire or burns. May cause fire, burns, injuries, electric shock. Do not let the terminal get wet with water, drinking water, urine of pet No liquids animals, etc. Don’t May cause fire, burns, injuries, electric shock. May cause fire, burns or injuries. Do not put the terminal into heating cooking device such as microwave Don’t oven or high-pressure container. CAUTION Do not leave the equipment on unstable or sloping surfaces. Do May cause fire, burns, electric shock. Children using the equipment should be instructed in proper operation by an adult. Do not allow them to use the equipment without adult supervision. May cause injuries. Store the equipment out of reach of small children. Do Do May be accidentally swallowed or cause injuries. Be careful especially when using FOMA terminal connected to the adapter continuously for a long time. If you use i-αppli, a videophone call or 1Seg watching while charging the battery for a long time, FOMA terminal, battery pack and adapter may be heated. Directly touching a hot part for a long time, you may have redness, itching or rash on your skin, or it may result in low-temperature burns depending on your constitution and/or health condition. F-05C_EN_ninshou Handling FOMA terminal WARNING Do Do not direct the infrared data port toward home electric appliances etc. Don’t equipped with infrared device when using infrared communication. May cause an accident because of malfunction of infrared device. Do May impair eyesight. And may cause accidents like injury etc., by dazzling or astounding other people. Do not put foreign objects such as liquid like water, metal pieces or Don’t burnable things into UIM slot or microSD card slot. Don’t Failure to do so may cause the equipment to fail or malfunction. * Examples of electronic equipment to avoid. Hearing aids, implanted pacemakers or defibrillators, other electronic medical equipment, fire alarms, automatic doors and other automatic control equipment. Users wearing implanted pacemakers or defibrillators or other electronic medical equipment should check with the manufacturer or sales outlet about the effect of radio frequencies on the equipment. Do Do If you have weak heart, be careful when setting the Vibrate alert (vibration) or alert volume setting. May cause harmful effect on heart. May disturb driving and cause an accident. Do Do To sound the high-pitched alarm, always keep FOMA terminal away from your ears. Failure to do so may cause hearing defect. When you use electronic medical equipment, check with the equipment manufacturer to determine how the device is affected by radio waves before using. May cause harmful effect on electronic medical equipment etc. When the display or camera lens is accidentally broken, be careful of broken glass or exposed internal parts of FOMA terminal. Surfaces of display and camera lens are made of plastic panels and they are structured for the glass not to scatter, however, if you mistakenly touch broken or exposed parts, you may be injured. Too loud volume may cause a hearing loss. And, if you cannot hear the sound around you clearly, it may cause an accident. May cause fire, burns, injuries, electric shock. Do not turn on the light aiming directly at the driver of the car etc. When you talk by setting handsfree or ring alert is sounding, keep FOMA terminal away from your ear. And, when connecting the earphone/ microphone to FOMA terminal and play a game or music, adjust the volume moderately. Turn FOMA terminal OFF near highprecision electronic control equipment or electronic equipment using low-power signals. Introduction May cause harmful effect on eyes. Do not turn on the light by getting the lighting part closer to other person's Don’t eyes. Do Failure to do so may cause electronic equipment or electronic medical equipment to fail or malfunction. If the function which automatically turns the power ON is set, cancel the setting before turning the power OFF. When using the phone in a medical facility, be sure to observe the regulations of the facility. If you do prohibited act such as using the phone in an airplane, you will be punished according to law. Do not direct the infrared data port toward your eye and transmit signals. Don’t Turn FOMA terminal OFF in areas where use is prohibited, such as in airplanes and hospitals. CAUTION Do not swing FOMA terminal by its antenna or strap. Don’t May cause accident such as injury to yourself or others by hitting. F-05C_EN_ninshou Do not use damaged FOMA terminal. May cause fire, burns, injuries, electric shock. Don’t Do Introduction When using the motion tracking or motion sensor, check the safety Don’t around you, hold FOMA terminal firmly, and do not shake it unnecessarily. May cause accident such as injuries. If the display part is accidentally broken and liquid crystal leaks out, do Don’t not make the liquid contact with your skin of face or hands. May cause loss of sight or skin problems. If the liquid gets into your eyes or mouth, rinse it with clean water and see a doctor immediately. And, if the liquid adheres to skin or clothing, use alcohol etc. to wipe it off, then wash with soap. Do To use the terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using. In rare cases, using the phone in some vehicle models can cause the vehicle's electronic equipment to malfunction. In that case, stop using the terminal immediately. Do 10 Mobile phones can give some users skin problems such as itching, allergic reactions or rashes. If you develop skin problems, stop using the phone immediately, and see a doctor. ⇒ "Material list (P13)" When opening or closing FOMA terminal, take care not to have your fingers or strap caught by the terminal. Do not throw the battery pack into the fire. Don’t May cause accident such as injuries. Do When watching the display, take a certain distance from the display in a fully bright place. Do not nail the battery pack, hit with a hammer or step on it. Don’t May reduce visual acuity. Handling battery pack ■ Check that the battery type matches the type displayed on the battery pack label. Display Li-ion 00 Do DANGER Check the orientation of battery pack to install it to FOMA terminal, and do Don’t not try to force the battery pack onto FOMA terminal if you are having trouble installing it. May cause battery pack to ignite, burst, heat or leak. If the battery packs fluid etc. contacts eyes, immediately flush the eyes with clean water and see a doctor right away. Do not rub the eyes. WARNING If the battery pack seems to have abnormalities such as deformation or Don’t scratches due to falling, never use it. May cause battery pack to ignite, burst, heat or leak. Do not connect a wire or other metal objects to the jack. And, do not carry Don’t or store FOMA terminal with objects like a metal necklace. May cause battery pack to ignite, burst, heat or leak. May cause battery pack to ignite, burst, heat or leak. May cause loss of sight. Battery type Li-ion battery May cause battery pack to ignite, burst, heat or leak. Do If the battery pack leaks or gives off a strange smell, immediately remove it from the vicinity of open flames. The vapors from leaking battery pack fluid may ignite or explode. Be careful not to let your pet bite the battery pack. Do May cause battery pack to ignite, burst, heat or leak. F-05C_EN_ninshou CAUTION Do not discard old battery packs together with other garbage. Don’t Do not use or charge a wet battery pack. Don’t Do May cause battery pack to ignite, burst, heat or leak. When it starts to thunder, do not touch adapter. Don’t If incorrect voltage is used, this may cause fire, burns or electric shock. AC adapter : AC100V DC adapter : 12 or 24V DC (specific for negative ground vehicle) AC adapter for global use : Between 100V and 240V AC (Connect to the AC outlet for internal household use) May cause electric shock. Do not short the charging jack while it is connected to the outlet or cigarette Don’t lighter socket. Do not touch the charging jack with a part of your body such as your hand or finger. If the DC adapter's fuse blows, replace it only with the specified fuse. May cause fire, burns, electric shock. If fluid etc. leaks out from battery pack, do not make the fluid contact with your skin of face or hands. May cause loss of sight or skin problems. If the fluid etc. put into your eyes or mouth, or contacts skin or clothes, immediately flush the contacted area with clean water. If the fluid put into the eyes or mouth, immediately see a doctor after flushing. Do May cause fire, burns, electric shock. Do not place heavy objects on the adapter cord. Don’t Do May cause fire, burns, electric shock. When you insert and remove AC adapter from power outlet, do not Don’t contact a metal strap or other metal objects with the jack. WARNING Do not touch the adapter cord or outlet with wet hands. Do Do No wet hands May cause fire, burns, electric shock. May cause fire, burns, electric shock. Do not use the AC adapter or desktop holder in a bathroom or other highly Don’t humid area. Failure to do so may cause fire, burns, electric shock. When you connect the AC adapter to an outlet, do not fail to properly connect to the outlet. May cause fire, burns, electric shock. Do not use the adapter cord if it gets damaged. Don’t Failure to do so may cause fire, burns, electric shock. For the specified fuse, see the instructions that come with the DC adapter. Wipe off any dust that accumulates on the power plug. May cause fire, burns, electric shock. Handling adapter Only use with the specified power source and voltage. When charging FOMA terminal overseas, use AC Adapter for global use. Introduction May cause igniting or environmental destruction. Tape the terminals of old battery packs to insulate them, and then bring them into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for. Always use the DC adapter with a negative-ground vehicle. Do not plug Don’t it into a positive-ground vehicle. Do When you disconnect the adapter from the outlet or cigarette lighter socket, do not pull the adapter cord with excessive force. Instead, hold the power plug to disconnect. May cause fire, burns, electric shock. May cause fire, burns, electric shock. 11 F-05C_EN_ninshou Always remove the power plug from the outlet or cigarette lighter when Unplug not using the adapter for an extended period. Do not swing around the FOMA terminal by the touch pen when the Don’t touch pen is attached to the FOMA terminal. Introduction Failure to do so may cause fire, burns, electric shock. Immediately remove the power plug from the outlet or cigarette lighter Unplug socket if water or other fluids get into the adapter. May cause fire, burns, electric shock. Always remove the power plug from the outlet or cigarette lighter socket Unplug when cleaning the equipment. Failure to do so may cause fire, burns, electric shock. CAUTION Do May cause injuries. ■ These precautions are based on the guidelines produced at the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from radio waves emitted by mobile phone units. WARNING Obey the following rules inside medical facilities. Do ・ Do not bring FOMA terminal into operating ・ ・ Handling touch pen WARNING Do not point the touch pen at person. Don’t 12 May cause injury or loss of sight by hitting yourself or others. FOMA terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. Handling mobile phones near electronic medical equipment Handling UIM Be careful of the cut surface when removing UIM. Do May cause accident such as injury to yourself or others by hitting. ・ ・ rooms (ORs), intensive care units (ICUs) or coronary care units (CCUs). Turn FOMA terminal OFF in hospital wards. Turn FOMA terminal OFF in hospital lobbies and corridors if electronic medical equipment could be nearby. If the medical facility has specified zones where use or possession of mobile devices is prohibited, obey those instructions. If the function to automatically turn ON the power is set, cancel the setting before turning the power OFF. Turn FOMA terminal OFF in crowded trains or other public places where pacemaker or defibrillator wearers could be nearby. Do Wearers of implanted pacemakers or defibrillators must carry and use FOMA terminal at least 22 cm away from the implanted device. FOMA terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. Do When electronic medical equipment other than implanted pacemakers or defibrillators are in use outside of medical facilities (such as in home care settings), check with the device manufacturer to determine how the device is affected by electrical signals. FOMA terminal's signals may affect the performance of electronic medical equipment. F-05C_EN_ninshou Material list Material Surface treatment Kurukuru-key cover PC+ABS resin UV hard coating Movable PA-GF resin part Display UV hard coating Movable side operation key PC resin Operation keys Movable ABS resin part Exterior side surface UV hard coating Material Movable Stainless steel UV hard part Back coating surface Movable ABS resin part Rear surface (top end side) UV hard coating Fixed part PC+ABS resin UV hard Keypad coating Fixed part PC+ABS resin UV hard Battery coating Back cover PC+ABS resin UV hard coating Movable part Screw cap ABS resin UV hard coating Display panel Acrylic resin+PET sheet None Kurukuru-key PC resin UV hard coating Part Surface treatment None UV hard coating Battery PPS resin contacts connector body PC resin UV hard coating Battery contacts Gold plating Side keys PC resin UV hard coating Screw (Battery install Stainless steel None recess) Lock key PC resin UV hard coating Battery install recess face PC board Camera panel Acrylic resin UV hard coating Charging jack Stainless steel Gold plating Mobile light panel Acrylic resin Wrinkled UIM card tray POM resin None Battery pack PC resin None Fixed part Screw cap Silicon rubber None External connection jack cap Elastomer resin (TPEE) UV hard coating External connection jack Stainless steel Tin plating Antenna for digital terrestrial broadcasti ng Antenna top PC+ABS resin Wrinkled Pipe Stainless steel None Root bend section Nickel titanium Root rotation part Stainless steel Nickel plating Battery contacts Material Battery pack Beryllium copper Contacts Beryllium copper Introduction Surface treatment Part Exterior case Part Gold plating Gold plating None 13 F-05C_EN_ninshou Handling precautions General Introduction 14 FOMA terminal ・ Do not get wet. ・ Do not press the surface of the touch panel strongly or operate it with sharp - The FOMA terminal, battery pack, adapter, UIM are not waterproof. Do not use in a bathroom or other highly humid area or do not let rain attached. Or putting the terminal on your body, humidity of sweat may cause internal corrosion and malfunction. Note that malfunctions, which are determined to be caused by such water as result of inspections, are not covered by the warranty. Since these conditions are outside the scope of the warranty, a repair, if at all possible, is charged. ・ Clean FOMA terminal with a dry soft cloth (such as a cloth for eyeglasses). - Rubbing it roughly with a dry cloth may scratch the display. - Drops of water or dirt left on the display may cause stains. - If FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade. ・ Clean the jack occasionally with a dry cotton swab etc. - If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. Also, be careful never to damage the jack when cleaning it. ・ Do not place FOMA terminal near an air-conditioner outlet. - The rapid change in temperature may cause condensation, causing internal corrosion and malfunction. ・ When using, be careful not to subject excessive force to FOMA terminal or the battery. - If FOMA terminal is crammed into a brimming bag or placed in a pocket and sat on, display, internal PCBs or battery pack may be damaged or malfunction. And, if external devices are plugged into the external connection jack (earphone/ microphone jack), the breakage of the connector or malfunction may result. ・ Do not rub or scrape the display with a metal piece etc. - It may scratch the display, causing malfunction or damage. ・ Carefully read the separate instructions that come with the battery pack, adapter and desktop holder. objects such as a nail, a ballpoint pen and a pin. - It may damage the touch panel. ・ Avoid extreme temperature. - Use the FOMA terminal where the temperature ranges between 5 and 35℃ and humidity ranges between 45 and 85%. ・ FOMA terminal may affect land-line phones, TVs or radios in use nearby, so use it as far as possible from these appliances. ・ Maintain a separate record of the data you saved in your FOMA terminal. - If the data is deleted, DOCOMO assumes no responsibility for the loss of any data. ・ Do not drop FOMA terminal or subject it to shocks. - May cause malfunction or damage. ・ Do not plug external devices into the external connection jack (earphone/ microphone jack) at a slant, or do not pull it forcibly while it is plugged. - May cause malfunction or damage. ・ Do not close FOMA terminal with the strap etc. held inside. - May cause malfunction or damage. ・ It is normal for FOMA terminal to become warm during use or charging. Continue to use it. ・ Do not leave FOMA terminal with the camera in areas under strong direct sunlight. - May cause discoloring or burn-in of materials. ・ FOMA terminal should normally be used with the external connection jack cap closed. - Dust and/or water brought into FOMA terminal cause troubles. ・ Do not use FOMA terminal with the back cover removed. - It may cause the battery to come off, or may cause a malfunction or damage. ・ Do not put extremely thick stickers on the display or the key side. - May cause malfunction or damage. ・ While microSD card is being used, do not take the card out and do not turn off FOMA terminal. - May cause data loss or malfunction. F-05C_EN_ninshou ・ Do not bring magnetic cards etc. close to FOMA terminal or clip it with the terminal. - Magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased. ・ Do not bring magnetized objects close to FOMA terminal. - Bringing strong magnetism close may cause malfunction. - Replace the battery pack if FOMA terminal has extremely short operation time on a full charge, though it may vary by operating conditions. Purchase a new battery pack of the specified type. ・ Charge the battery in an area within the proper ambient temperature range (535℃). ・ The operation time provided by the battery pack varies by the operating environment and battery pack's deterioration. ・ The battery pack may swell out as it comes to near the end of its lifetime depending on the usage conditions, but it is not a problem. ・ Be careful especially about the following points when preserving the battery pack. - Keeping under the state of the full charge (right after charging ends) - Keeping under the state of the empty charge (too exhausted to turn on FOMA terminal) They may cause the battery pack performance to be degraded or its lifetime to be shortened. A recommended battery level to preserve the battery pack is the battery icon in 2 cells as a guide. 35℃). ・ Do not charge the battery in the areas below. - In areas of excessive humidity, dust or vibrations - Near land-line phones or TVs/radios ・ It is normal for the adapter to become hot while charging. Continue to use it. ・ When using the DC adapter for charging, keep the vehicle engine running. - The vehicle's battery could become flat. ・ When using an outlet with a mechanism preventing unplugging, follow the handling instructions for that outlet. ・ Do not give strong shock. Do not deform the charging jack. - May cause malfunction. Introduction Battery pack ・ The battery pack is a consumable part. Adapter ・ Charge the battery in an area within the proper ambient temperature range (5- UIM ・ Do not use excessive force to install/remove UIM. ・ Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using a UIM with another IC card reader/writer. ・ Always keep UIM ICs clean. ・ Clean UIM with a soft, dry cloth (such as a cloth for eyeglasses). ・ Maintain a separate record of the data you saved in UIM. - If the data is deleted, DOCOMO assumes no responsibility for the loss of any data. ・ To preserve the environment, bring the old UIM to a sales outlet such as docomo Shop. ・ Take care not to scratch, touch accidentally or short IC. - May cause data loss or malfunction. ・ Do not drop UIM or subject it to shocks. - May cause malfunction. ・ Do not bend UIM or place heavy objects on it. - May cause malfunction. ・ Do not install UIM into the FOMA terminal with a label or sticker put on UIM. - May cause malfunction. 15 F-05C_EN_ninshou Touch pen ・ Use the attached touch pen for using the FOMA terminal. Introduction - If you use other than specified accessory, it may cause damage or turbidity of the display. ・ Do not use the attached touch pen for another device. - It may cause malfunction or damage of the device. FeliCa reader/writer ・ FeliCa reader/writer function of FOMA terminal uses weak waves requiring no licenses for radio stations. ・ It uses 13.56 MHz frequency band. When using other reader/writers in your surroundings, keep FOMA terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby. CAUTION ・ Do not use a remodeled FOMA terminal. Using a remodeled terminal violates the Radio Law. FOMA terminal is certified according to technical standard conformance of specified wireless equipment based on the Radio Law, and as a proof of it, the "Technical Compliance Mark " is depicted on the engraved sticker of FOMA terminal. If you remodel FOMA terminal by removing its screws, your certification of technical standard conformance becomes invalid. Do not use FOMA terminal with its certification of technical standard conformance invalid as it violates the Radio Law. ・ Be careful when you use FOMA terminal while driving a car etc. Using a mobile phone while driving is subject to penal regulations. If you inevitably receive a call, tell the caller that you will "call back" by handsfree, then park in a safe place and call back. ・ Use FeliCa reader/writer function only in Japan. FeliCa reader/writer function of FOMA terminal conforms to Japanese radio standards. If you use this function overseas, you may be punished. 16 F-05C_EN_ninshou Before Using Attaching UIM/battery pack After turning power OFF, close FOMA terminal and hold it in your hand so that you can properly attach UIM/battery pack. ✜ Removing Back Cover With the label side of the battery pack upward, align convex parts of the battery pack with concave parts of FOMA terminal and insert the battery pack in the direction of a, press the battery pack in the direction of b to set it in. Convex parts Basic Operation Slide the lever in the direction of a to unlock, hold the FOMA terminal firmly with one hand not to slide, press the back cover with a thumb of the other hand and slide approximately 3mm in the direction of b to remove. ✜ Installing battery pack Press here with your thumb Back cover Battery pack Concave parts ✜ Installing back cover ✜ Attaching UIM Pull the tab with your nail and pull out the tray until it clicks (a). Hold UIM with the IC side down, align the corner cut with the tray (b) and push into the tray until it stops (c). Tab Align the 8 tabs of the back cover to the notches of the FOMA terminal, press the back cover in the direction of a without forming any gap between the FOMA terminal and back cover and slide it in the direction of b to install. Back cover UIM IC Corner cut Tray Point ・ UIM (blue) is not available for this FOMA terminal. If you have the UIM (blue), bring it to a docomo Shop. 17 F-05C_EN_ninshou Before Using Charging The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to charge the battery before using FOMA terminal. Charging using AC adapter Basic Operation a Open jack cap (a) of FOMA terminal, hold the connector horizontally with the arrows side upward and insert it to the jack (b) b Unfold the power plug and insert it into a 100V AC outlet * Check that the light turns on. c When charging is over, pull out the power plug from the outlet, and pull out from FOMA terminal horizontally while pressing the release buttons on both sides of the connector Charging using desktop holder in combination a Insert the AC adapter to the attached desktop holder, with the arrows on the AC adapter's connector upward b Unfold the AC adapter's power plug and insert it into a 100V AC outlet c With FOMA terminal closed, insert it into the attached desktop holder * Check that the light turns on. d After charging is completed, remove FOMA terminal from the desktop holder AC adapter Light Power plug Release buttons External connection jack 100V AC outlet Insert at the back side Connector Light Power plug 100V AC outlet Connector Desktop holder Release buttons AC adapter Jack cap 18 ✜ Operations for charging When charging starts, a charge start alert sounds. While charging, the light turns on and the battery icons on the display and the sub-display blink. When charging is over, a charge completion alert sounds. F-05C_EN_ninshou Before Using Before Using Turning power ON - Configuring default setting User information Perform the following operations after turning the power ON for the first time. Check your own phone number. For details of checking/changing a mail address, refer to "Mobile Phone User's Guide [i-mode] FOMA version". a f (2 sec. or more) b On a confirmation screen of enlarged menu setting, "Yes" or "No" a me0 User information The screen shown to the right appears. The screen shown to the right appears. Always set Terminal security code. If you exit without setting, Initial setting screen reappears when the power is turned ON the next time.d On a confirmation screen of software update function, g The stand-by display appears. Basic Operation c Set required itemseC [Complete] Point ・ Besides your phone number and mail address, birthday, postal code/ Point ・ If no operation is performed, the display light is turned off automatically according to the settings in Light time-out or eco mode. The display light turns on again if there is any operation or incoming call. Turning power off : f (2 sec. or more) Changing the initial setting : mehgdg Changing screen display to English : mehbfceSelect "English" address, company name, etc. can be saved in User information. Editing user information : On User information edit screen, Ce AuthenticateeEditeC Checking the user information during a call etc. : se0 19 F-05C_EN_ninshou Screen Explanation Viewing display Basic Operation 20 The current state can be checked by the icon appearing on the screen. Major icons are as follows. : Arrival i-concier information exists : Music&Video Channel program Top of the display obtaining failure : Unreceived i-mode mail exists in iBattery level (Battery icon) mode Center : Reading UIM : Displaying SSL/TLS page etc. : IC card lock ON : Auto-send mail exists : Available multi-cursor key Ample Almost exhausted : Music&Video Channel program : Performing reserved 1Seg recording charge (Charge the battery) obtaining reservation exists : i-αppli Auto start failed Signal strength (Antenna icon) : During i-αppli operation : microSD card installed during Communication mode : i-αppli call exists Out of service area or where : Alarm clock ON : Connected to external device using Strong Weak radio waves do not reach USB cable : Schedule reminder ON : Self mode ON : Inside OFFICEED area : Pedometer/ACT monitor is set : In data transfer mode : Software update rewrite notice Bottom of the display : Connecting to i-mode : Auto-update of latest pattern definition : Infrared communication in operation failure : The total calls cost exceeds the limit Arrival information (Starting from the left, : Communication using handsfreemissed call, recorded message, voice mail compatible device in progress service, unread message, unread ToruCa, : Handsfree ON i-αppli call) : eco mode ON : Silent mode ON : Lock on close or Lock when immobile : Call alert volume OFF ON : Vibrator for voice call ON : Kid-safe mode ON : In Public mode (Drive mode) : A phonebook entry or schedule has : Record message ON secret attribute : Keypad dial lock ON : High-pitched alarm ON : Personal data lock ON : Unread Area Mail exists : Unread i-mode mail exists F-05C_EN_ninshou Task area The icon indicating the function (task) in progress appears in the task area. Task area Guide area and key operation Operations that can be performed by pressing m, a, g, C and I are displayed in the guide area. To perform an operation in the guide area, press the corresponding key. on the guide area corresponds to multi-cursor keys k. Guide area Basic Operation 21 F-05C_EN_ninshou Screen Explanation Menu operation On the stand-by display, press m and then perform the functions from the menu. You can select a menu item with shortcut operations, which use the keypad, * and #, or with multi-cursor operation, which uses the multi-cursor key to move the cursor. Selecting "Calculator" Basic Operation Shortcut operations a me7e4 a meMove the cursor to "g Accessory"eg [Select]eMove the cursor to "d Calculator"eg [Select] Point ・ Even when a function is running, you can perform the same operation if "MENU" is displayed on the guide area. ・ To return to the previous screen, press c. To return to the stand-by display, press f. ・ On the stand-by display with Info/calendar layout, shortcut icons set, or with arrival information icon or i-concier information displayed, press g to change the display to focus mode that allows you to quickly display the related information. Multi-cursor key operations 22 Switching menu screens You can switch among "Kisekae menu", the design of which can be changed using Kisekae Tool (⇒P33), "Basic menu", which has the fixed menu numbers, and "Custom menu", to which menu items can be saved freely. A Kisekae menu matched with the color of FOMA terminal is set by default. Point ・ In some types of Kisekae menus, the menu structure is changed according to usage frequency, or the number assigned to menu item (item number) may not be applicable. ・ The menu that appears when m is pressed on the stand-by display can be changed in Select startup menu. ⇒ P29 F-05C_EN_ninshou Screen Explanation Screen Explanation Motion sensor 使いかたガイド (Guide) You can operate FOMA terminal by double-tapping (tapping it twice) or tilting it. You can check overviews and operations of functions, and troubleshooting. (In Japanese only) ✜ Stopping alarm a mef LifeKite* GuideeSelect a search method When FOMA terminal is closed and the alarm sounds, double-tapping the front or back side stops the alarm. ✜ Tilting FOMA terminal Setting Motion sensor a meh Settings & NWserviceseg Clock & Other ef Motion sensor eSet required itemseC [Set] Basic Operation Tilting FOMA terminal while pressing and holding S or D when Browser screen is displayed scrolls the screen or switches the clock view orientation on the sub-display. 目次 (Contents) : Search from a list of functions. 索引 (Index) : Search from a list of words sorted according to Japanese syllabary. フリーワード検索 (Free word search) : Enter a keyword to search for. ブックマーク (Bookmark) : Search from a list of registered bookmarks. 困ったときには (Troubleshooting) : Search from lists of troubles or error messages. Point ・ On a description screen, select "この機能を使う (Use this function)" to perform a function. Selecting a link item in "関連機能 (Related functions)", or "→コチラ (See more)" displays a corresponding description screen. ・ Terms indicated with 【 】in this manual are index terms in "Guide". 23 F-05C_EN_ninshou Caller ID notification (At subscription : Notify) You can notify your phone number (caller ID) to the other party's terminal when making a voice call. a meh Settings & NWserviceseh NW Servicese d Caller IDea Caller ID notificationea Activate/ Deactivateea Notify Select "b Not notify" if you do not want to inform. Basic Operation 24 Point ・ Caller ID is your important personal information. Carefully consider whether you want to include caller ID information when making a call. ・ If an announcement of requesting caller ID is heard when making a call, make a call again after setting Caller ID notification or adding prefix "186". F-05C_EN_ninshou Appendix Specific absorption rate (SAR) of mobile phone Others 128 This model F-05C mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves (*1) and limits to exposure to radio waves recommended by a set of equivalent international guidelines. This set of international guidelines was set out by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with the World Health Organization (WHO), and the permissible limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health condition. The technical regulations and international guidelines set out limits for radio waves as the Specific Absorption Rate, or SAR, which is the value of absorbed energy in any 10 grams of tissue over a 6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for use at the ear is 0.623 W/kg. There may be slight differences between the SAR levels for each product, but they all satisfy the limit. The actual SAR of this mobile phone while operating can be well below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum required to reach the network. Therefore in general, the closer you are to a base station, the lower the power output of the device. This mobile phone can be used in positions other than against your ear. This mobile phone satisfies the international guidelines when used with a carrying case or a wearable accessory approved by NTT DOCOMO, INC.(*2) In case you are not using the approved accessory , please use a product that does not contain any metals, and one that positions the mobile phone at least 1.5 cm away from your body. The World Health Organization has stated that present scientific information does not indicate that there are harmful effects attributed to the use of mobile devices. They recommend that if you are worried about your exposure then you can limit your usage or simply use a hands-free kit to keep the mobile device away from the head and body. Please refer to the WHO website if you would like more detailed information. http://www.who.int/docstore/peh-emf/publications/facts_press/ fact_english.htm Please refer to the websites listed below if you would like more detailed information regarding SAR. Ministry of Internal Affairs and Communications Website: http:// www.tele.soumu.go.jp/e/sys/ele/index.htm Association of Radio Industries and Businesses Website: http://www.aribemf.org/index02.html(in Japanese only) NTT DOCOMO, INC. Website: http://www.nttdocomo.co.jp/english/product/sar/ FUJITSU LIMITED Website: http://www.fmworld.net/product/phone/sar/ *1 Technical regulations are defined by the Ministerial Ordinance Related to Radio Law (Article 14-2 of Radio Equipment Regulations). *2 Regarding the method of measuring SAR when using mobile phones in positions other than against the ear, international standards (IEC62209-2) were set in March of 2010. On the other hand, technical regulation is currently being deliberated on by national council. (As of November, 2010) Declaration of Conformity The product "F-05C" is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2.The Declaration of Conformity can be found on http://www.fmworld.net/product/phone/doc/. This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency(RF) energy, which SAR* value, when tested for compliance against the standard was 0.508W/Kg. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure. The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. F-05C_EN_ninshou ** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/ Kg) averaged over ten grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. *** Tests for SAR have been conducted using standard operation positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. Federal Communications Commission (FCC) Notice ・ This device complies with part 15 of the FCC rules. ・ Operation is subject to the following two conditions : a this device may not cause harmful interference, and b this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made in or to the radio phone, not expressly approved by the manufacturer, will void the user's authority to operate the equipment. FCC RF Exposure Information Others This model phone meets the U.S. Government's requirements for exposure to radio waves. This model phone contains a radio transmitter and receiver. This model phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy as set by the FCC of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions as accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output level of the phone. Before a phone model is available for sale to the public, it must be tested and certified to prove to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed on position and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC, when tested for use at the ear, is 0.380W/kg, and when worn on the body, is 0.485W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirements. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Equipment Authorization Search section at http:// www.fcc.gov/oet/ea/fccid/ (please search on FCC ID VQK-F05C). For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and which positions the handset at a minimum distance of 1.5 cm from the body. * In the United States, the SAR limit for wireless mobile phones used by the general public is 1.6 Watts/kg (W/kg), averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements and the network band. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 129 F-05C_EN_ninshou These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Important Safety Information Others 130 AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers flight mode or similar feature consult airline staff as to whether it can be used on board. DRIVING Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed. HOSPITALS Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment. PETROL STATIONS Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff. INTERFERENCE Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pace maker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and does not carry it in a breast pocket. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. For other Medical Devices : Please consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. F-05C_EN_ninshou Appendix Appendix Export Administration Regulations Intellectual Property Right This product and its accessories may be under coverage of the Export Administration Regulations of Japan ("Foreign Exchange and Foreign Trade Control Laws" and the related laws and regulations). And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense. For details, contact Ministry of Economy, Trade and Industry of Japan or US Department of Commerce. Copyrights and portrait rights Except for the case protected by copyright laws such as personal use, use of FOMA terminal to reproduce, alter, or publicly transmit recorded pictures or sounds, or copyrighted text, images, music or software downloaded from websites without the copyright holder's authorization is prohibited. Note that taking photos or recordings at some demonstrations, performances or exhibitions may be prohibited even when only for personal use. Avoid taking pictures of others with FOMA terminal without their consent or disclosing recorded pictures of others without their consent to general public through Internet websites etc., because they may infringe on portrait rights. Trademarks Others Company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders. ・ "FOMA", "i-mode", "i-αppli", "i-motion", "Deco-mail", "Chara-den", "ToruCa", "mopera", "WORLD CALL", "DCMX", "iD", "WORLD WING", "OFFICEED", "2in1", "docomo STYLE series" and logos of "FOMA", "i-mode", "i-αppli", "Music&Video Channel", "DCMX", "iD" and "iC" are trademarks or registered trademarks of NTT DOCOMO. ・ "Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation. ・ Free Dial logo mark is a registered trademark of NTT Communications Corporation. ・ McAfee® is registered trademarks or trademarks of McAfee, Inc. and/or its affiliates in the US and/or other countries. ・ G-GUIDE, G-GUIDE MOBILE and their logos are registered trademarks in Japan of U.S. Gemstar-TV Guide International, Inc. and/or its affiliates. ・ Contains Adobe® Flash® Lite® and Adobe Reader® Mobile technology by Adobe Systems Incorporated. Adobe Flash Lite Copyright© 2003-2010 Adobe Systems Incorporated. All rights reserved. Adobe Reader Mobile Copyright© 1993-2010 Adobe Systems Incorporated. All rights reserved. 131 F-05C_EN_ninshou ・ ・ ・ ・ ・ ・ ・ ・ ・ Others 132 ・ ・ Adobe, Adobe Reader, Flash and Flash Lite are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. This product contains NetFront Browser, NetFront Sync Client of ACCESS CO., LTD. ACCESS, the ACCESS logo and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the United States, Japan and/or other countries. Copyright© 2010 ACCESS CO., LTD. All rights reserved. Powered by JBlend™ Copyright 2002-2009 Aplix Corporation. All rights reserved. JBlend and JBlend-related trademarks are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. is a registered trademark of FeliCa Networks, Inc. QR code is a registered trademark of Denso Wave Inc. microSDHC Logo is a trademark of SD-3C,LLC. "Multitask" is a registered trademark of NEC Corporation. QuickTime is a registered trademark of Apple Inc., in the US and other countries. Microsoft®, Windows®, Windows Vista®, Windows Media® and PowerPoint® are trademarks or registered trademarks of "Microsoft Corporation" in the US and other countries. The abbreviations of operating systems (Japanese versions) below are used in this manual. - Windows 7 stands for Microsoft® Windows® 7(Starter, Home Basic, Home Premium, Professional, Enterprise Ultimate). - Windows Vista stands for Windows Vista® (Home Basic, Home Premium, Business, Enterprise and Ultimate). - Windows XP indicates the Microsoft® Windows® XP Professional operating system or Microsoft® Windows® XP Home Edition operating system. Google and Google Map for Mobile are trademarks of Google Inc. ATOK + APOT of Justsystem Corporation is installed in this product as Japanese character conversion function. "ATOK" "APOT (Advanced Prediction Optimization Technology)" are registered trademarks of Justsystem Corporation. ・ This product contains software licensed by Symbian Foundation Limited. ・ ・ ・ ・ ・ ・ Symbian is a registered trademark of Symbian Foundation Limited. "Privacy mode" is a registered trademark of FUJITSU LIMITED. "Uni-Type" is a registered trademark of LIM Corp., Ltd. Blu-ray Disc and its logo are trademarks. ズーキーパー (Zookeeper) is a trademark or registered trademark of KITERETSU Inc. "日英版しゃべって翻訳 for F (J-E Speech Translation for F)" is trademark of ATR-Trek. Other company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders. F-05C_EN_ninshou Others ・ FeliCa is a contactless IC card technology developed by Sony Corporation. FeliCa is a registered trademark of Sony Corporation. ・ This product contains a module developed by the Independent JPEG Group. ・ This product is equipped with the technologies of GestureTek, Inc. Copyright© 2006-2010, GestureTek, Inc. All Rights Reserved. ・ "学研モバイル国語辞典 (Gakken Mobile JpnDic)", "学研モバイル和英辞典 ・ ・ Others (Gakken Mobile JE Dic)", "学研モバイル英和辞典 (Gakken Mobile EJ Dic)", "今 日は何の日 (Today's trivia)" and "今日の歴史 (Today in history)" are copyrighted by GAKKEN CO., LTD. This product is licensed based on MPEG-4 Visual Patent Portfolio License. The use of MPEG-4 Video Codec function is allowed for personal and nonprofit use only in the cases below. - Recording moving pictures and i-motion that conform to MPEG-4 Visual Standard (hereinafter referred to as MPEG-4 Video) - Playing MPEG-4 Videos recorded personally by consumers not engaged in profit activities - Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA For further utilizing such as promotion, in-house use or profit-making business, please contact MPEG LA, LLC in U.S. Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-protected content. If the WMDRM software fails to protect the content, content owners may ask Microsoft to revoke the software's ability to use WMDRM to play or copy protected content. Revocation does not affect unprotected content. When downloading licenses for protected content, you agree that Microsoft may include a "Revocation List" with the licenses. Content owners may require you to upgrade WMDRM to access their content. If you decline an upgrade, you cannot access a content that requires the upgrade. 133 General Inquiries 0120-005-250 (toll free) * Service available in: English, Portuguese, Chinese, Spanish, Korean. * Unavailable from part of IP phones. Repairs ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) ■ From land-line phones (In Japanese only) 0120-800-000 (toll free) (Business hours : 9:00 a.m. to 8:00 p.m.) * Unavailable from land-line phones, etc. ■ From DOCOMO mobile phones (In Japanese only) (Business hours : 24 hours (open all year round)) ■ From land-line phones (In Japanese only) (No prefix) 151 (toll free) * Unavailable from land-line phones, etc. * Unavailable from part of IP phones. 0120-800-000 (toll free) * Unavailable from part of IP phones. (Business hours : 9:00 a.m. to 8:00 p.m. (open all year round)) ● Please confirm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site. NTT DOCOMO website http://www.nttdocomo.co.jp/english/ i-mode site iMenu⇒お客様サポート (user support)⇒ドコモショップ (docomo Shop) * In Japanese only Loss or theft of FOMA terminal or payment of cumulative cost overseas (available 24 hours a day) (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay Failures encountered overseas ■ From DOCOMO mobile phones -81-3-6832-6600 (toll free) International call access code for the country you stay -81-3-6718-1414* (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc. ※If you use F-05C, you should dial the number +81-3-6832-6600 (to enter '+', press and hold the '0' key for at least one second). * You are charged a call fee to Japan when calling from a land-line phone, etc. ※If you use F-05C, you should dial the number +81-3-6718-1414 (to enter '+', press and hold the '0' key for at least one second). ■ From land-line phones ■ From land-line phones Universal number international prefix Universal number international prefix -8000120-0151 * You might be charged a domestic call fee according to the call rate for the country you stay. ※For international call access codes for major countries and universal number international prefix, refer to DOCOMO International Services website. -8005931-8600* * You might be charged a domestic call fee according to the call rate for the country you stay. ※For international call access codes for major countries and universal number international prefix, refer to DOCOMO International Services website. ● If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal. ● If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan. To prevent damage to the environment, bring used battery packs to a docomo service counter, a docomo agent or a recycle center. Don't forget your mobile phone ・・・ or your manners! When using your mobile phone in a public place, don't forget to show common courtesy and consideration for others around you. 2011.1 (1st Edition) CA92002-XXXX
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2010:10:29 17:08:39+09:00 Create Date : 2010:10:29 17:08:30+09:00 Metadata Date : 2010:10:29 17:08:39+09:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : L01.fm Creator : DocMaker Document ID : uuid:0856687b-db73-492c-9df9-7e274032d321 Instance ID : uuid:16153797-34dc-44c6-8ce1-69fd1aed637d Producer : Acrobat Distiller 8.1.0 (Windows) Page Count : 26 Author : DocMakerEXIF Metadata provided by EXIF.tools