Fujitsu F09A Fujitsu F-09A Cellular Phone User Manual F 09A L01

Download:
Mirror Download [FCC.gov]
Document ID	1085709
Application ID	etvpbzYBSRw7DK2KGC+uGA==
Document Description	Manual part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.59kB (1544888 bits)
Date Submitted	2009-03-26 00:00:00
Date Available	2009-06-03 00:00:00
Creation Date	2009-03-16 17:47:31
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2009-03-16 17:47:31
Document Title	F-09A.book(L01.fm)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DocMaker

F-09A_E1kou
F-09A.book
Page 25
Thursday, March 5, 2009

a Light sensor
Sense the ambient luminance (automatic
adjustment of the brightness of the display).
* Blocking the light sensor may disable correct adjustment
of the brightness.
b Light
Turn on or blink when receiving a call, mail/i-concier
information, calling, obtaining ToruCa, accessing IC
card, GPS positioning (Position location, Notify
location and Location request), shooting an image,
recording a movie, operating Music&Video Channel
player or MUSIC Player, sounding tone of Alarm
clock (Snooze), Schedule reminder or Countdown
timer, and transmitting iC, or operate according to
the settings of Indicator light or Light alert.
c Display (touch panel) → P30, 39
d Microphone
Send your voice from here.
* Do not cover the microphone during a call or sound
recording.
* Rear microphone does not pick up your voice because it is
to cut noise.
e 1Seg antenna → P223
* The terminal has a built-in 1Seg antenna. For better signal
reception, do not cover the antenna with your hand.
* When you watch 1Seg with FOMA terminal held
sideways, it is recommended that you hold the opposite
side of the antenna section.
11:37 AM
f Earpiece
Hear other party's voice from here.
g In-camera
Shoot your own image, or send your image via
videophone.
h FOMA Built-in antenna
* The terminal has a built-in FOMA antenna. For better
voice quality, do not cover the antenna with your hand.
i Out-camera
Shoot still images or movies, send images over a
videophone call.
j Light/Shooting indication light → P78, 214, 352
Camera light for videophone calls, still image
shooting, movie recording, simple light, or it turns
on or blinks for still image shooting or movie
recording.
Mark → P280, 328
Installation of IC card
* You can use Osaifu-Keitai by placing
mark over IC
card reader or send/receive data by iC transmission. The
IC card cannot be detached.
l Back cover
m Back cover lever → P52
n Infrared data port → P327, 331
Infrared communication, Infrared remote control.
o Speaker
Hear ring alert or voice of the caller using the
speakerphone etc. from here.
p Fingerprint sensor → P48, 112
q Strap opening
r External connection jack
An integrated connection jack for charging or
connecting earphone etc.
* Available to connect an optional AC adapter, DC adapter,
FOMA USB Cable with Charge Function, Earphone Plug
Adapter for External connector terminal etc.
s Charging jack
t microSD card slot → P315
The antenna
Before Using the Handset
25
F-09A_E1kou
F-09A.book
Page 26
Thursday, March 5, 2009

The functions available by pressing keys are as
follows.
● : Press ■ : Press for 1 second or more
a mMENU key
● Display menus, perform the operation shown at
the upper left of the guide area.
b Ii-mode/i-αppli/▲ (scroll)/Character
● Establish i-mode connection and display iMenu.
● Scroll upward the mail screen or site/website
display by pages.
● Perform the operation shown in the lower-left
corner of the guide area, switch character entry
modes.
■ Display i-αppli folder list.
c cch/α/Clear key
● Display i-Channel list, switch i-αppli stand-by
display and i-αppli activation.
● Delete characters or return to previous screen.
■ Start/Cancel Self mode.
d nStart a voice call/
/Speakerphone/AF key
● Make/Receive a voice call, return to the previous
character while entering characters.
● Switching the speakerphone function, start/
cancel auto-focus.
■ Make a voice call using the speakerphone
function.
■ Restore the character string to its previous state.
e Keypads
1-9
● Enter phone numbers (1-9) or characters, select
menu/items.
■ Perform the function registered in Custom menu.
● Enter phone number (0) or characters, select
menu/items.
■ Use Auto switch of Int'l call assist when making
international calls.
26
Before Using the Handset
11:37 AM
f *＊/A/a/Line feed/Public mode (Drive mode)
key
● Enter "＊", "゛", "゜", etc., switch upper/lower
case.
● Line feed while entering characters, select menu/
items.
● Switch display/hide of guide area when shooting
a still image.
● Switch horizontal and vertical displays while
playing movie/i-motion or Music&Video Channel.
■ Start/Cancel Public mode (Drive mode).
g Multi-cursor key
gEnter key
● Perform the operation, activate Focus mode.
■ Start i-αppli registered for one-key shortcut.
uSchedule/↑ key
● Display Scheduler.
● Adjust volume, move the cursor upward.
■ Display alarm list
dPhonebook/↓ key
● Display phonebook.
● Adjust volume, move the cursor downward.
■ Add to the phonebook.
lReceived calls/← (previous) key
● Display Received calls, switch displays, move the
cursor leftward.
■ Start/Cancel privacy mode when "Activate/
Deactivate" of Activation option is set to "Hold Lcursor key".
rRedial/ →(next) key
● Display Redial, switch displays, move the cursor
rightward.
■ Start/Cancel IC card lock.
* May be described as jhk.
h CCamera key
● Start still image shooting, perform the operation
shown at the upper right of the guide area.
■ Start movie recording.
i aMail/▼ (scroll) key
● Display mail menu, perform the operation shown
at the lower right of the guide area.
● Scroll downward the mail screen or site/website
display by pages.
● Pressing twice : Check new message
■ Display mail creation screen
j fPower/End key
● Terminate on-hold, calling/operating function,
display/hide calendar layout.
■ Press for 2 seconds or more : Turn power ON/
OFF.
k ##/Macro shooting/Silent mode key
● Enter "＃", "、", "。", "?", "!", "・", select menu/
items.
● Turn Macro mode on or off while using the
camera.
■ Start/Cancel Silent mode.
l zLock key
● Activate the touch panel lock.→P125
■ Start/Cancel Operation lock, or cancel Lock when
immobile.
■ Cancel/Restart touch lock during a call with
FOMA terminal closed.→P127
m Ti-Widget/TV key
● Start/Exit i-Widget
■ Watch 1Seg or switch Multi windows.
F-09A_E1kou
F-09A.book
Page 27
Thursday, March 5, 2009
11:37 AM
n USearch key
● Enter the target word, place or name and search.
→P339
■ Start/Cancel Silent mode*
* The setting of Search key shortcut is the operation in the
default state.
o sMultitask key
● Perform another function while talking or
operating (Multiaccess/Multitask).
■ Activate/Cancel the auto rotation lock when
FOMA terminal is closed.
p ZCamera key
● Start/End/Save shooting when a camera is active,
or save a still image during 1Seg watching, when
FOMA terminal is closed.
● Stop ring alert, alarm sound or vibrator.
■ Activate still image shooting
■ Activate quick message recorder while receiving
a call, activate/stop voice memo or movie memo
during a call.
■ Start/Stop video recording during 1Seg watching
when FOMA terminal is closed.
Before Using the Handset
27
F-09A_E1kou
F-09A.book
Page 28
Thursday, March 5, 2009
11:37 AM
Available FOMA terminal usage styles
You can use functions of this FOMA terminal with touch operation in addition to
keypad operation.
･ This manual gives descriptions assuming that FOMA terminal is open unless
otherwise noted.
■ Touch style (closed state)
You can use touch operation instead of keypad operation. Auto rotation function
realized by motion sensor freely switches the vertical/horizontal display.
Slide style
(opened state (vertical))
YOKO-MOTION style
(opened state (horizontal))
･ Slide up the display section to use the terminal in the slide style. Additionally
or
･
･
･
Touch style (Vertical display)
Touch style (Horizontal display)
･ Keep this state when you carry FOMA terminal.
･ While a camera is used, horizontal display is always applied even in touch style
(vertical).
■ Slide style (opened state (vertical))/YOKO-MOTION style (opened state
(horizontal))
It is the basic operation style that corresponds to all keypad operations.
･
rotate the display 90 degrees clockwise to use the terminal in the YOKO-MOTION
style.
To close, rotate or slide in the opposite direction.
When Slide and edit is set to "ON", the edit screen for mail, schedule or notepad
can be displayed in the slide style.→P350
When Slide and answer is set to "ON", you can answer a voice call by switching
to the slide style.→P73
Use Turn-display option to set functions such as the one activated by rotating the
terminal 90 degrees clockwise etc.→P351
✔INFORMATION
･ When you use the slide style or YOKO-MOTION style, do not rotate the display
counterclockwise nor more than 90 degrees clockwise.
･ i-Widget, i-concier information and i-schedule are unavailable in the touch style
(horizontal) and YOKO-MOTION style.
･ Do not forcibly open/close or rotate FOMA terminal. It may cause malfunction or
damage to the keys and display.
･ Do not close FOMA terminal with the strap held inside. It may cause malfunction or
damage.
･ Do not attach labels or stickers on the rear side of the display or the key side. It may
cause malfunction, damage, etc.
･ When you carry FOMA terminal, activate Operation lock or Lock when immobile to
prevent inadvertent operations of the touch panel or to save battery power
consumption.
･ When you open/close or rotate FOMA terminal, avoid touching the touch panel with
your finger to prevent inadvertent operations.
28
Before Using the Handset
F-09A_E1kou
F-09A.book
Page 29
Thursday, March 5, 2009
11:37 AM
･ Keep magnetic materials such as a magnet away from FOMA terminal. It may cause
failure or malfunction.
･ Do not place the terminal with the display side down on a desk. It may scratch the
display surface.
･ When carrying this terminal in a bag, do not allow a hard object to hit the display. It
may scratch the display, causing malfunction or damage.
Before Using the Handset
29
F-09A_E1kou
F-09A.book
Page 30
Thursday, March 5, 2009
11:37 AM
Viewing display
The current state can be checked by the icon appearing on the screen.
a-m
: Battery icon→P57
: Antenna icon→P58
: Out of service area→P58
: Self mode ON→P117
: Data transfer mode ON*1 →P124, 315, 327, 365
/ : In i-mode (during i-mode connection)/(during
packet communication)→P174
*2
o-z
: Bluetooth connection established→P363
: Communication using handsfree-compatible
device in progress→P72
: Communication using a Bluetooth handsfree
device in progress→P364
: Communication using a Bluetooth headset in
progress→P364
: Speakerphone function in use→P65
(blue)/ (red)/ / : Network in use→P398
: Power saving mode activated→P102
*2
Vertical display
o-z
*2
: Positioning with GPS→P291
(blue)/
(gray) : Location request setting with
GPS/Out of permission period→P294
*2
a-m
(gray) : Operation lock or Lock when immobile is
temporarily cancelled→P127
(Red) : Operation lock activated (Authentication
ON/OFF is set to "ON") or Lock when immobile
activated→P127
(Yellow) : Operation lock activated
(Authentication ON/OFF is set to "OFF")→P127
: Auto rotation lock is activated→P49
: A phonebook entry or schedule has secret
attribute→P87, 347
h Unread Area Mail, mail, i-concier information or
MessageR/F state→P145, 163, 165, 168, 200
: Unread Area Mail
Horizontal display
30
: Infrared communication in operation→P327
Infrared remote control in operation→P331
(blue)/ (gray) : Bluetooth power ON/Power
saving mode activated→P363
: The total calls cost exceeds the limit→P356
Before Using the Handset
F-09A_E1kou
F-09A.book
Page 31
Thursday, March 5, 2009
: Unread i-mode mail and SMS storage space is
full on UIM
: Unread i-mode mail and SMS storage space is
full
: SMS storage space is full on UIM
: Unread i-mode mail and SMS exist
: Unread i-mode mail exists
: Unread SMS exists
: Arrival i-concier information exists
(red)/
(blue) : Unread MessageR storage
space is full or unread MessageR exists
: Unread mail and unread i-concier information
exist
(red)/ (green) : Unread MessageF storage
space is full or unread MessageF exists
*2
i Storage state in i-mode Center, Full Browser screen
display→P145, 163, 178, 189
: i-mode mail and MessageR/F storage are full or
one of these spaces is full and unreceived mails
exist in Data Center
: i-mode mail or MessageR/F storage
space is full in Data Center
: Unreceived i-mode mail and MessageR/F exist
in Data Center
: Unreceived i-mode mail, MessageR or
MessageF exists in Data Center
: Scrolling Full Browser screen by tilting the
terminal
: Full Browser screen is displayed (Mobile mode)
: Full Browser screen is displayed (PC mode(full
scale))
11:37 AM
: Music&Video Channel program obtaining
reservation exists→P239
k i-αppli/i-αppliDX/i-αppli call state→P255, 272, 273
: During i-αppli operation
(gray) : i-αppli stand-by display ON
(orange) : i-αppli is being started from the i-αppli
stand-by display
: i-αppliDX is running
(gray) : i-αppliDX stand-by display ON
(orange) : i-αppli is being started from the iαppliDX stand-by display
: i-αppli call received while i-αppli is running
(gray) : i-αppli call received while displaying iαppli stand-by display
(orange) : i-αppli call received while i-αppli is
being started from i-αppli stand-by display
: i-αppli call received while i-αppliDX is running
(gray) : i-αppli call received while displaying iαppliDX stand-by display
(orange) : i-αppli call received while i-αppli is
being started from i-αppliDX stand-by display
: i-αppli call received
*3
: Alarm clock ON→P341
: 1Seg watching/recording reservation, schedule
reminder ON→P232, 344
: Schedule reminder or 1Seg watching/recording
reservation and alarm clock are simultaneously
ON→P232, 341, 344
*3
: Inside OFFICEED area→P394
: Arrival information→P38
: Shortcut icons→P348
: Silent mode ON→P95
: Personalized silent mode ON→P96
: Call alert volume is Silent→P92
: Vibrator for voice call ON→P93
: Call alert volume is Silent and vibrator for voice
call ON→P93
: In Public mode (Drive mode)→P74
: Record message ON/recorded messages
full→P76
: Keypad dial lock ON→P118
*2
: Location request of GPS success/
failure/end as unanswered→P293
: Personal data lock ON→P117
: Music&Video Channel obtaining failure/
success→P239
: 1Seg recording reservation completed/
failed→P234
*2
: Displaying SSL/TLS page/Executing SSL
session with i-αppli, using i-αppli downloaded
from SSL page→P175
: Frame of SSL page is enlarged→P180
: Mail failed to Auto-send exists→P144
: Auto-send mail exists→P144
: Frame is enlarged→P180
Before Using the Handset
31
F-09A_E1kou
F-09A.book
Page 32
Thursday, March 5, 2009
*2
11:37 AM
(blue)/
(gray) : microSD card installed or not
: Reading UIM→P50, 58
during microSD mode
(key is yellow) : IC card lock ON→P282
(blue)/
(gray) : microSD card installed or not
: Individual IC card lock→P282
during MTP mode
: Displaying available multi-cursor key in
*2
y : Connected to external device using USB cable→
Focus mode→P38
: Remote customization ON→P133
P80, 322
: Pedometer/Activity monitor is set→P359
: Performing 1Seg recording reservation/1Seg
*2
recording (only watching stopped)→P231, 234
: Software update notice→P456
: i-αppli Auto start failed→P272
: Software update pre-specified→P457
x State of USB mode settings and microSD card→
: Update notification icon→P456
P315, 322
: Auto-update of the latest pattern definition
: microSD card installed during Communication
failed/succeeded→P459
mode
*1 When data transfer mode is activated, the terminal is in the same state as out of service area and Multitask becomes unavailable.
*2 The current highest-priority item is displayed. These icons are listed in descending order of the priority from the top.
*3 Time appears on a screen other than the stand-by display.
A Stand-by touch button→P41
✔INFORMATION
･ Depending on the displayed function, an icon may be displayed at a different position, or some or all icons may not be displayed.
32
Before Using the Handset
F-09A_E1kou
F-09A.book
Page 33
Thursday, March 5, 2009
11:37 AM
◆ Task area
The icon indicating the function (task) in progress appears in the task area. During
Multiaccess or Multitasks, the icons show which functions are running.
Task area
Vertical display
Horizontal display
Task area
Horizontal full-display
❖ Icons indicated on the task area
: Voice call
: Received calls
: Redial
: Record message/Voice memo
: Videophone call
: Videophone using an external device
: Call (switching)
: Call (disconnecting)
: FOMA terminal phonebook
: Contact setting of Privacy mode
: Kisekae Tool
: Mail/MessageR/F
: Area Mail
: Receiving i-mode mail
: Checking new message/SMS
: Sent msg. log/Received msg. log
: Receiving SMS
: Displaying i-mode/PDF data (except data saved from Full Browser)
: Displaying Full Browser/PDF data (data saved from Full Browser)
: i-mode Bookmark/Go to location/Browser history/Screen memo/two-touch site
: i-concier
: Still camera
: Movie camera
: Bar code reader
: 1Seg
: Activating Music&Video Channel
: Music&Video Channel program obtaining
: MUSIC Player
: i-αppli
: ToruCa
: Position location of GPS
: Location request of GPS
: Notify location of GPS
: Location history (GPS)
: My Picture
: Movie/i-motion
: Chara-den
: Melody
(blue)/ (gray) : Accessing microSD card/Standing by for accessing
: Sound recorder
: Displaying a folder of My Document (PDF data) or data list
: Other (Word, Excel, PowerPoint file)
: Adjusting volume by Multitask
: Countdown timer
: Alarm clock
: Scheduler/Schedule reminder ringing (including activation notification of
1Seg)
: Fake call
: User information
: Calculator
: Pedometer/Activity monitor
Before Using the Handset
33
F-09A_E1kou
F-09A.book
Page 34
Thursday, March 5, 2009
11:37 AM
: Search engine
: Notepad
: Dictionaries
: Bluetooth function
: Packet transmission or communication/Sending or receiving packets in
progress via Bluetooth function
: 64K data communication via Bluetooth function
: Accessing Data Center
: Displaying synchronization log
: Network services set
: Calling or communicating packets via USB/Sending or receiving packets
via USB
: 64K data communication
: Accessing external data
: Updating software/Software update notified
: Updating pattern definition/Displaying version
/ (gray) : Each function set or on hold
◆ Guide area
Operations that can be performed by pressing m, I, g, C and a are
displayed in the guide area. Displayed operations vary by the screen.
Display locations and keys correspond as shown in the figure.
Guide area
･
34
on the guide area corresponds to multi-cursor keys k (It may be different
depending on the function you are using or how the site or website is made).
Before Using the Handset
◆ List screen
a When a list extends to multiple pages, the currently displayed page number and
the total number of pages appear.
F-09A_E1kou
F-09A.book
Page 35
Thursday, March 5, 2009
11:37 AM
b Items with numbers or symbols displayed can also be selected even by pressing
the corresponding key (1-9, 0, *, #). Items without numbers
of symbols displayed can be selected by moving the cursor to the item and
pressing g. Pressing the key corresponding to the item number or pressing the
following keys allows you to select the item.
c indicates that there are items that can be selected above and below the cursor
position. Press j to move the cursor. When d is pressed on the last item of
the page, the next page appears, when u is pressed on the first item of the
page, the previous page appears.
indicates that there are items that can be selected over the multiple pages.
Press h to change the page. Some screens such as an icon selection screen
cannot be switched.
◆ i-Widget screen
仮
Selecting functions from menu
･ This manual mainly gives descriptions assuming that Kisekae Tool is set to
"White".
･ Menus are categorized by function.→P412
◆ Menu screen and switching method
❖ Menu screen
The following menu screens are available.
Kisekae menu : A menu that you can change the design using Kisekae tool.
In addition to menus compatible with movies, "拡大メニュー (enlarged menu)"
that is easy to view with large font and "Simple Menu" are available. A Kisekae
menu matched with the color of FOMA terminal is set by default.
･ Some Kisekae menu changes the menu structure according to usage frequency.
In the Kisekae Tool stored by default, "切替メニュー (Switch menu)" and "ダイレ
クトメニュー (Direct menu)" in the "Preinstalled" folder support this function.
･ Some Kisekae menu does not support English display when setting Select
language to "English".
Basic menu : A basic menu that the menu structure and menu numbers are fixed.
･ Menu icons or background design can be changed by customizing Kisekae Tool
or menu.→P103, 105
･ The font size of the menu changes synchronized with Kisekae Tool.
Custom menu : A menu that menu items can be freely registered.→P349
e.g. : i-Widget screen
･ While i-Widget is running, operations that correspond to m, I, g, C, a
and k are displayed on the screen as in the guide area. Displayed operations
differ depending on screens.
･ Using i-Widget→P276
Before Using the Handset
35
F-09A_E1kou
F-09A.book
Page 36
Thursday, March 5, 2009
11:37 AM
❖ To switch the menu screen temporarily
❖ Selecting menu items by keypad (Shortcut operations)
In each menu screen, you can temporarily switch to a different menu screen by the
following operations. You can also set which menu to display when pressing m
on the stand-by display.→P103
When numbers (item number) are assigned to menu items, a menu item can be
selected by pressing the corresponding keypad (1-9, 0, *, #).
･ Press the item number displayed with the preferred menu item.
･ Item numbers differ when "Simple Menu" is set by Kisekae Tool.→P425
･ Item number of the menu→P412
 Selecting "Calculator"
C*1
1 m74
C*2
Basic menu
Kisekae menu
Custom menu
*1 Cannot be switched when Kisekae menu or Shortcut menu is set as Select startup menu.
*2 Cannot be switched when Basic menu is set as Select startup menu.
✔INFORMATION
･ Some types of Kisekae menus change the menu structure according to usage
frequency. Also, the number assigned to menu item (item number) may not be applied.
◆ Selecting a function
Press m in stand-by and select and perform the functions from the menu
displayed.
There are 2 ways. One method involves using the keypad corresponding to the
menu items (Shortcut operation). In the other method, the multi-cursor key is used
to select from among the menu items.
･ If any function is restricted by lock functions or no UIM is installed,
icon
appears or the font color changes indicating that the function is disabled. Note
that the display does not change for Kisekae menu. When a function is selected,
the reason that the function cannot be performed etc. is displayed.
･ Function description about the menu item at the cursor position may appear for
some types or levels of the menu. The current setting may also displayed in some
menu items.
36
Before Using the Handset
F-09A_E1kou
F-09A.book
Page 37
Thursday, March 5, 2009
11:37 AM
❖ Selecting menu items by multi-cursor key
 Selecting "Calculator"
meMove the cursor to "Accessory"eg
◆ Selecting method of submenu
When "MENU" is displayed at upper-left of the guide area, various operations can
be performed with submenus.
 Selecting the redial submenu
On the redial list screen, mePress a keypad for the submenu item
1 number
Cursor
position
Kisekae menu
Basic menu
There are menu
items in lower
level
･ If you press k to move the cursor, the color and/or design of the cursor
position change. Moving by h is unavailable for some menus.
･ When "Simple Menu" is set for Kisekae menu, you can also move the cursor
and press r to select a menu (second level or upper).
2 Move the cursor to "Calculator"eg
❖ To return to stand-by display or previous menu
After selecting a menu item, you can return to the stand-by display or previous
menu by pressing the following keys.
f : Return to the stand-by display.
c : Return to the previous menu. Depending on the menu, you can return to the
previous menu also by pressing l.
･ You can also select an item by moving the cursor to and pressing g or r.
･ Item numbers of the submenu with the same functions may vary by the
operating screen.
･ Pressing m or c closes the submenu.
◆ Operating procedure of each item
■ Selection of an item
When numbers or
is displayed, press the corresponding keys. You can also
select an item by moving the cursor with k and press g. When moving the
cursor, the item at the cursor may be framed or change in color.
･ Depending on the function, you can check vibration pattern of the vibrator, color
or lighting pattern of light alert, the color scheme of screen settings or brightness
of the display by moving the cursor to an item.
Before Using the Handset
37

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2009:03:16 17:47:31+09:00
Create Date                     : 2009:03:16 17:47:31+09:00
Metadata Date                   : 2009:03:16 17:47:31+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : F-09A.book(L01.fm)
Creator                         : DocMaker
Document ID                     : uuid:34e98642-b8f3-49ab-af59-6253af8998e7
Instance ID                     : uuid:fb3dc088-c1f3-44e5-b7a0-6c334d5ba457
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 13
Author                          : DocMaker

EXIF Metadata provided by EXIF.tools