Contents
- 1. user manual1
- 2. user manual2
user manual2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1314016 |
| Application ID | U2ZcB5i6v8n16O5EMlGReg== |
| Document Description | user manual2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 259.91kB (3248844 bits) |
| Date Submitted | 2010-07-20 00:00:00 |
| Date Available | 2010-09-06 00:00:00 |
| Creation Date | 2010-07-02 10:04:49 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2010-07-12 13:17:41 |
| Document Title | L01.fm |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | DocMaker |
F-10B_EN_ninshou Do Failure to do so may cause hearing defect. In rare cases, using the phone in some vehicle models can cause the vehicle's electronic equipment to malfunction. In that case, stop using the terminal immediately. CAUTION Do not swing FOMA terminal by its strap. Don’t May cause accident such as injury to yourself or others by hitting. Do not use damaged FOMA terminal. Do May cause fire, burns, injuries, electric shock. Don’t When using the motion tracking or motion sensor, check the safety Don’t around you, hold FOMA terminal firmly, and do not shake it unnecessarily. To use the terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using. Do Mobile phones can give some users skin problems such as itching, allergic reactions or rashes. If you develop skin problems, stop using the phone immediately, and see a doctor. ⇒ "Material list (P12)" When opening or closing FOMA terminal, take care not to have your fingers or strap caught by the terminal. DANGER Do not connect a wire or other metal objects to the jack. And, do not carry Don’t or store FOMA terminal with objects like a metal necklace. May cause battery pack to ignite, burst, heat or leak. Check the orientation of battery pack to install it to FOMA terminal, and do Don’t not try to force the battery pack onto FOMA terminal if you are having trouble installing it. May cause battery pack to ignite, burst, heat or leak. Do not throw the battery pack into the fire. Don’t May cause accident such as injuries. May cause accident such as injuries. If the display part is accidentally broken and liquid crystal leaks out, do Don’t not make the liquid contact with your skin of face or hands. May cause loss of sight or skin problems. If the liquid gets into your eyes or mouth, rinse it with clean water and see a doctor immediately. And, if the liquid adheres to skin or clothing, use alcohol etc. to wipe it off, then wash with soap. Do When watching the display, take a certain distance from the display in a fully bright place. Don’t Handling battery pack Display Li-ion 00 May cause battery pack to ignite, burst, heat or leak. Do not nail the battery pack, hit with a hammer or step on it. May reduce visual acuity. ■ Check that the battery type matches the type displayed on the battery pack label. Introduction Do To sound the high-pitched alarm, always keep FOMA terminal away from your ears. Do May cause battery pack to ignite, burst, heat or leak. If the battery pack's fluid contacts eyes, immediately flush the eyes with clean water and see a doctor right away. Do not rub the eyes. May cause loss of sight. Battery type Li-ion battery F-10B_EN_ninshou WARNING Introduction If the battery pack seems to have abnormalities such as deformation or Don’t scratches due to falling, never use it. Do May cause loss of sight or skin problems. If the fluid put into your eyes or mouth, or contacts skin or clothes, immediately flush the contacted area with clean water. If the fluid put into the eyes or mouth, immediately see a doctor after flushing. May cause battery pack to ignite, burst, heat or leak. Do If the battery pack leaks or gives off a strange smell, immediately remove it from the vicinity of open flames. The vapors from leaking battery pack fluid may ignite or explode. Handling adapter and desktop holder WARNING Be careful not to let your pet bite the battery pack. Do Do not use the adapter cord if it gets damaged. May cause battery pack to ignite, burst, heat or leak. Don’t CAUTION Do not discard old battery packs together with other garbage. Don’t May cause igniting or environmental destruction. Tape the terminals of old battery packs to insulate them, and then bring them into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for. 10 May cause battery pack to ignite, burst, heat or leak. May cause fire, burns, electric shock. Do not use the AC adapter or desktop holder in a bathroom or other highly Don’t humid area. Do not short the charging jack while it is connected to the outlet or cigarette Don’t lighter socket. Do not touch the charging jack with a part of your body such as your hand or finger. May cause fire, burns, electric shock. Do not place heavy objects on the adapter cord. Don’t Always use the DC adapter with a negative-ground vehicle. Do not plug Don’t it into a positive-ground vehicle. May cause fire, burns, electric shock. When it starts to thunder, do not touch adapter. Don’t May cause electric shock. May cause fire, burns, electric shock. When you insert and remove AC adapter from power outlet, do not Don’t contact a metal strap or other metal objects with the jack. May cause fire, burns, electric shock. Do not touch the adapter cord, desktop holder or outlet with wet No wet hands hands. May cause fire, burns, electric shock. May cause fire, burns, electric shock. Do not use or charge a wet battery pack. Don’t If fluid leaks out from battery pack, do not make the fluid contact with your skin of face or hands. Do Only use with the specified power source and voltage. When charging FOMA terminal overseas, use AC Adapter for global use. If incorrect voltage is used, this may cause fire, burns or electric shock. AC adapter : AC100V DC adapter : 12 or 24V DC (specific for negative ground vehicle) AC adapter for global use : Between 100V and 240V AC (Connect to the AC outlet for internal household use) F-10B_EN_ninshou Do Failure to do so may cause fire, burns, electric shock. For the specified fuse, see the instructions that come with the DC adapter. Wipe off any dust that accumulates on the power plug. Do Do May cause fire, burns, electric shock. Do When you disconnect the adapter from the outlet or cigarette lighter socket, do not pull the adapter cord with excessive force. Instead, hold the power plug to disconnect. May cause fire, burns, electric shock. Always remove the power plug from the outlet or cigarette lighter when Unplug not using the adapter for an extended period. Handling UIM CAUTION May cause fire, burns, electric shock. Do Do May cause injuries. Handling mobile phones near electronic medical equipment Do ■ These precautions are based on the guidelines produced at the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from radio waves emitted by mobile phone units. Obey the following rules inside medical facilities. Do ･ Do not bring FOMA terminal into operating rooms (ORs), intensive care units (ICUs) or coronary care units (CCUs). ･ Turn FOMA terminal OFF in hospital wards. ･ Turn FOMA terminal OFF in hospital lobbies and corridors if electronic medical equipment could be nearby. Wearers of implanted pacemakers or defibrillators must carry and use FOMA terminal at least 22 cm away from the implanted device. FOMA terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. Do WARNING Turn FOMA terminal OFF in crowded trains or other public places where pacemaker or defibrillator wearers could be nearby. FOMA terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. Be careful of the cut surface when removing UIM. Failure to do so may cause fire, burns, electric shock. Immediately remove the power plug from the outlet or cigarette lighter Unplug socket if water or other fluids get into the adapter. where use or possession of mobile devices is prohibited, obey those instructions. ･ If the function to automatically turn ON the power is set, cancel the setting before turning the power OFF. Failure to do so may cause fire, burns, electric shock. Failure to do so may cause fire, burns, electric shock. When you connect the AC adapter to an outlet, do not fail to properly connect to the outlet. ･ If the medical facility has specified zones Always remove the power plug from the outlet or cigarette lighter socket Unplug when cleaning the equipment. Introduction If the DC adapter's fuse blows, replace it only with the specified fuse. When electronic medical equipment other than implanted pacemakers or defibrillators are in use outside of medical facilities (such as in home care settings), check with the device manufacturer to determine how the device is affected by electrical signals. FOMA terminal's signals may affect the performance of electronic medical equipment. 11 F-10B_EN_ninshou Material list Part Surface treatment Introduction UV hard coating Movable ABS resin part Subdisplay UV hard coating Sub-display panel Acrylic resin IrDA panel Acrylic resin Movable PA-GF resin part Display UV hard coating Side keys PC+ABS resin UV hard coating Fixed part PA-GF resin Keypad UV hard coating Operation keys Urethane UV hard acrylate resin coating Screw (Battery install Stainless steel None recess) Body External connection jack cap Bending part PC+ABS resin UV hard coating Battery install recess face PC board Gold plating Elastomer resin (TPE) Battery pack PC resin None Hinge PC+ABS resin UV hard Fixed side coating Back cover PC+ABS resin UV hard coating POM resin Back cover lock lever Back cover inner plate None Stainless steel None None UV hard coating Battery PPS resin contacts connector body UV hard coating Battery contacts Gold plating (Ni-Pd plating based) None Water PC resin stop part None D ring None External connection jack Synthetic rubber (EPDM) Stainless steel Tin plating Battery contacts Material Acrylic resin Hinge PC+ABS resin UV hard Movable coating side 12 Surface treatment Display panel Material Fixed part PC+ABS resin UV hard Battery coating Case pad Material Surface treatment Part Exterior case Part Battery pack Contacts Beryllium copper Battery Body cover plate Gasket (inner lid) Charging jack Gold plating Stainless steel None Silicone None rubber (VMQ) Contacts Stainless steel Gold part plating Contacts LCP resin holder UIM card tray Polyurethane None resin Beryllium copper POM resin None None F-10B_EN_ninshou Handling precautions General FOMA terminal ・ Avoid extreme temperature. and do not allow accessories or optional devices to get wet. - Waterproofness of IPX5 and IPX7, and dustproofness of IP5X are provided on FOMA terminal by firmly closing the external connection jack cap and installing the back cover in a locked state. However it is not completely waterproofed. Do not attach/remove the battery pack in the rain or with waterdrop attached, or do not open/close the external connection jack cap or back cover. Water seepage may cause corrode of inside or malfunction. Accessories and optional devices are not waterproof. Malfunctions deemed to be caused by water are not covered by the warranty. Since these conditions are outside the scope of the warranty, a repair, if at all possible, is charged. ・ Clean FOMA terminal with a dry soft cloth (such as a cloth for eyeglasses). - Rubbing it roughly with a dry cloth may scratch the display. - Drops of water or dirt left on the display may cause stains. - If FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade. ・ Clean the jack occasionally with a dry cotton swab etc. - If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. Also, be careful never to damage the jack when cleaning it. ・ Do not place FOMA terminal near an air-conditioner outlet. - The rapid change in temperature may cause condensation, causing internal corrosion and malfunction. ・ When using, be careful not to subject excessive force to FOMA terminal or the battery. - If FOMA terminal is crammed into a brimming bag or placed in a pocket and sat on, display, internal PCBs or battery pack may be damaged or malfunction. And, if external devices are plugged into the external connection jack (earphone/ microphone jack), the breakage of the connector or malfunction may result. ・ Carefully read the separate instructions that come with FOMA terminal and adapter. ・ Do not rub or scrape the display with a metal piece etc. - It may scratch the display, causing malfunction or damage. - Use FOMA terminal where the temperature ranges between 5 and 40℃ (for more than 36℃, temporary use in bathroom etc. only) and humidity ranges between 45 and 85%. ・ FOMA terminal may affect land-line phones, TVs or radios in use nearby, so use it as far as possible from these appliances. ・ Maintain a separate record of the data you saved in your FOMA terminal. - If the data is deleted, DOCOMO assumes no responsibility for the loss of any data. ・ Do not drop FOMA terminal or subject it to shocks. - May cause malfunction or damage. ・ Do not plug external devices into the external connection jack (earphone/ microphone jack) at a slant, or do not pull it forcibly while it is plugged. - May cause malfunction or damage. ・ Do not close FOMA terminal with the strap etc. held inside. - May cause malfunction or damage. ・ It is normal for FOMA terminal to become warm during use or charging. Continue to use it. ・ Do not leave FOMA terminal with the camera in areas under strong direct sunlight. - May cause discoloring or burn-in of materials. ・ FOMA terminal should normally be used with the external connection jack cap closed. - Dust and/or water brought into FOMA terminal cause troubles. ・ Do not use FOMA terminal with the back cover removed. - It may cause the battery to come off, or may cause a malfunction or damage. ・ Do not put extremely thick stickers on the display or the key side. - May cause malfunction or damage. ・ While microSD card is being used, do not take the card out and do not turn off FOMA terminal. - May cause data loss or malfunction. Introduction ・ F-10B is waterproof, however, do not allow water to seep into FOMA terminal 13 F-10B_EN_ninshou ・ Do not bring magnetic cards etc. close to FOMA terminal or clip it with the Introduction terminal. - Magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased. ・ Do not bring magnetized objects close to FOMA terminal. - Bringing strong magnetism close may cause malfunction. Battery pack ・ The battery pack is a consumable part. - Replace the battery pack if FOMA terminal has extremely short operation time on a full charge, though it may vary by operating conditions. Purchase a new battery pack of the specified type. ・ Charge the battery in an area within the proper ambient temperature range (535℃). ・ The operation time provided by the battery pack varies by the operating environment and battery pack's deterioration. ・ The battery pack may swell out as it comes to near the end of its lifetime depending on the usage conditions, but it is not a problem. ・ Be careful especially about the following points when preserving the battery pack. - Keeping under the state of the full charge (right after charging ends) - Keeping under the state of the empty charge (too exhausted to turn on FOMA terminal) They may cause the battery pack performance to be degraded or its lifetime to be shortened. A recommended battery level to preserve the battery pack is the battery icon in 2 cells as a guide. 14 Adapter ・ Charge the battery in an area within the proper ambient temperature range (535℃). ・ Do not charge the battery in the areas below. - In areas of excessive humidity, dust or vibrations - Near land-line phones or TVs/radios ・ It is normal for the adapter to become hot while charging. Continue to use it. ・ When using the DC adapter for charging, keep the vehicle engine running. - The vehicle's battery could become flat. ・ When using an outlet with a mechanism preventing unplugging, follow the handling instructions for that outlet. ・ Do not give strong shock. Do not deform the charging jack. - May cause malfunction. UIM ・ Do not use excessive force to install/remove UIM. ・ Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using a UIM with another IC card reader/writer. ・ Always keep UIM ICs clean. ・ Clean UIM with a soft, dry cloth (such as a cloth for eyeglasses). ・ Maintain a separate record of the data you saved in UIM. - If the data is deleted, DOCOMO assumes no responsibility for the loss of any data. ・ To preserve the environment, bring the old UIM to a sales outlet such as docomo Shop. ・ Take care not to scratch, touch accidentally or short IC. - May cause data loss or malfunction. ・ Do not drop UIM or subject it to shocks. - May cause malfunction. F-10B_EN_ninshou Waterproofness ・ Do not bend UIM or place heavy objects on it. CAUTION ・ Do not use a remodeled FOMA terminal. Using a remodeled terminal violates the Radio Law. FOMA terminal is certified according to technical standard conformance of specified wireless equipment based on the Radio Law, and as a proof of it, the "Technical Compliance Mark " is depicted on the engraved sticker of FOMA terminal. If you remodel FOMA terminal by removing its screws, your certification of technical standard conformance becomes invalid. Do not use FOMA terminal with its certification of technical standard conformance invalid as it violates the Radio Law. ・ Be careful when you use FOMA terminal while driving a car etc. Using a mobile phone while driving is subject to penal regulations. If you inevitably receive a call, tell the caller that you will "call back" by handsfree, then park in a safe place and call back. ・ Use FeliCa reader/writer function only in Japan. FeliCa reader/writer function of FOMA terminal conforms to Japanese radio standards. If you use this function overseas, you may be punished. F-10B is provided with the following waterproofness by firmly closing the external connection jack cap, installing the back cover and locking the cover. ・ IPX5 (Former JIS protection code 5)*1 ・ IPX7 that is a higher standard than IPX7 (former JIS protection code 7)*2 Also, F-10B is provided with IP5X (JIS protection code 5)*3 dustproofness by firmly closing the external connection jack cap, installing the back cover and locking the cover. *1 Code IPX5 means that a phone keeps functioning after directly applying a jet flow of 12.5 L/min. for at least 3 minutes from a distance of 2.5-3 m on a rotating turntable. *2 Code IPX7 means that a phone keeps functioning after it is slowly submerged to depth of 1 m in static tap water at room temperature, left there for 30 minutes and then taken out. *3 Code IP5X means a protection degree that the mobile phone keeps functioning after it is placed in a device with dust in diameter 75 μm or less for 8 hours, agitated and then taken out. Introduction - May cause malfunction. ・ Do not install UIM into FOMA terminal with a label or sticker put on UIM. - May cause malfunction. 15 F-10B_EN_ninshou ✜ What you can do with waterproofness of F-10B ・ You can talk without using an umbrella in the rain (for rainfall of 20 Introduction mm or less per hour). - When your hands or FOMA terminal are wet, avoid installing/ removing the back cover or opening/closing the external connection jack cap. ・ You can use FOMA terminal in a bathroom. - Do not put the terminal in the bathtub. Do not use the terminal in hot water. Doing so may cause malfunction. - Never put FOMA terminal in hot spring water or water containing soap, detergent or bath powder. ・ You can immerse FOMA terminal in static water of wash bowl and wash dirt out with shaking the terminal. - Install the back cover and with it locked, holding the external connection jack cap not to open and wash it not using brush, sponge, etc. To ensure waterproofness/dustproofness To avoid water ingress, be sure to observe the points below. ・ Do not throw any liquid other than room-temperature tap water on FOMA terminal, or soak it in such liquid. ・ Open/close the external connection jack cap as described below.Place your finger at groove on the hinge side to open the cap. Groove on the hinge side Close with the tab for the back cover at the rear side of the cap fitted into the concave of this terminal. Make sure that the cap is completely closed without slack. Tab on the back side cover 16 F-10B_EN_ninshou ・ Install the back cover as described below. Back cover ・ Do not let FOMA terminal fall. It may become scratched causing the waterproof performance to degrade. ・ The external connection jack cap and the rubber packing of the inner lid play an important role for keeping waterproof performance. Do not remove or scratch it. Also, prevent dust from adhering to it. To keep the FOMA terminal waterproof/dustproofness, replacement of parts is required every 2 years regardless of whether FOMA terminal appears normal or abnormal. DOCOMO replaces the parts as a chargeable service. Bring FOMA terminal to a sales outlet such as a DOCOMO-specified repair office. Introduction Align 8 tabs of the back cover with concaves of FOMA terminal. While pressing the back cover in the direction of a so that there is no gap between FOMA terminal and back cover, slide the back cover in the direction of b to install, then slide the back cover lever in the direction of c to lock. Important precautions Do not perform actions shown in the illustrations below. Lever * Make sure that the back cover is completely closed without slack. Slide the back cover in the direction of the arrow shown on the lever, and then make sure the cover is securely locked before using. ・ Securely lock the back cover and firmly close the external connection jack cap. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter. ・ Do not poke the microphone, earpiece or speaker with a swab or sharp object. Using Soap/Detergent/ Bath power Washing with brush/sponge Using in hot spring Washing by washing machine Applying strong water flow Soaking in ocean Using in pool water water 17 F-10B_EN_ninshou Observe the following precautions to use FOMA terminal properly. ・ Accessories and optional devices are not waterproof. When Introduction 18 watching 1Seg etc. with FOMA terminal installed in the included desktop holder, do not use it in a bathroom, shower room, kitchen or lavatory even if it is not connected to the AC adapter. ・ Do not apply water flow stronger than allowed (⇒P15) (e.g., such water flow that gives you pain when applied to your skin directly from a faucet or shower). F-10B provides the following waterproof performances of IPX5. Water may seep into the inside and it causes electric shock or corrosion of the battery. ・ Do not put FOMA terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ・ Do not move in water or slam the terminal against the surface of water with FOMA terminal opened. ・ If you put the terminal in tap water or in water of swimming pool, be sure to have it within 30 minutes. ・ When you use the terminal in swimming pool, obey rules of the facility. ・ FOMA terminal does not float on water. ・ Do not leave water on FOMA terminal. May short-circuit the power jacks, or in a cold region, water may freeze causing malfunction. ・ Do not leave water on the microphone, earpiece or speaker. Such water may interfere with talking. ・ If the back cover is damaged, replace it. Water may enter inside from a damaged section causing troubles such as electric shocks or corrosion of the battery. ・ If FOMA terminal gets wet with water or other liquids with the external connection jack cap or back cover open, the liquid may get inside the terminal causing electric shocks or malfunction. Stop using FOMA terminal, turn the power OFF, remove the battery pack and contact a DOCOMO-specified repair office. ・ If rubber gasket on the external connection jack cap or inner lid is damaged or deformed, replace it at DOCOMO-specified repair office. DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. Draining the water from FOMA terminal When FOMA terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Wipe FOMA terminal surface with dry, clean cloth etc. F-10B_EN_ninshou b Shake FOMA terminal approximately 20 times, firmly holding its hinge section, until there is no more water splattering. Introduction To drain water off the speaker, shake FOMA terminal with the speaker upward d Remove the back cover and wipe off any drops of water around the inner lid and the rear side of the back cover. Never open the inner lid. After wiping off the water, install and lock the back cover. Removing back cover ⇒P21 Around the inner lid c Softly press dry, clean cloth etc., against FOMA terminal to wipe off water remaining in the microphone, earpiece, speaker, keys, hinges or charging jack. Rear side of the back cover e Wipe off water drained from FOMA terminal with dry, clean cloth etc., and dry naturally. ･ Water, if any, remaining in FOMA terminal may ooze up after wiping off. ･ Do not wipe off water remaining in concaves directly with a cotton swab etc. 19 F-10B_EN_ninshou Charging Introduction 20 Check the following before and after charging. ・ Check that FOMA terminal is not wet. Never try to charge the battery pack when FOMA terminal is wet. ・ Accessories and optional devices are not waterproof/dustproof. ・ When charging the battery when or after FOMA terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the included desktop holder or opening the external connection jack cap. ・ When the external connection jack cap is opened for charging, close the cap firmly after charging. It is recommended that the desktop holder be used for charging to prevent water from seeping inside from the external connection jack. ・ Do not use the AC adapter or desktop holder in a bathroom, shower room, kitchen, lavatory or other highly humid area. May cause fire or electric shock. ・ Do not touch the AC adapter or desktop holder with wet hands. May cause electric shock. F-10B_EN_ninshou Before Using Attaching UIM (FOMA card)/battery pack After turning power OFF, close FOMA terminal and hold it in your hand so that you can properly attach UIM/battery pack. ✜ Removing Back Cover Slide the lever in the direction of a to unlock, pressing the back cover with a thumb and slide approximately 2 mm in the direction of b to remove. Pinch the tab of inner lid and hold it up in the direction of c to open until it stops. ✜ Installing battery pack With the label side of the battery pack upward, align convex parts of the battery pack with concave parts of FOMA terminal and slide the battery pack in the direction of a, press the battery pack in the direction of b to set it in and close the inner lid. Convex parts Basic Operation Press here with your thumb Battery pack Lever Concave parts ✜ Installing back cover Back cover Tab ✜ Installing UIM Pull the tab with your nail and pull out the tray until it clicks (a). Hold UIM with the IC side down, align the corner cut with the tray (b) and push into the tray until it stops (c). Tab Place the 8 tabs of back cover to the notches, press back cover in the direction of a to avoid forming any clearance between FOMA terminal and back cover, then slide it in the direction of b to install and slide the lever of the back cover in the direction of c to lock it. Back cover UIM IC Corner cut Tray Point ･ UIM (blue) is not available for this FOMA terminal. If you have the UIM (blue), bring it to a docomo Shop. Lever Point ･ The inner lid is designed to be closed firmly to maintain waterproofness. Note that forcibly opening may hurt your nail or finger. ･ To avoid damage by forcible opening, hinge of the inner lid (joint part to terminal body) is designed to be removed. If it is removed, align the pin metal of the inner lid with groove of FOMA terminal and push it until it clicks. 21 F-10B_EN_ninshou Before Using Charging The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to charge the battery before using FOMA terminal. Charging using desktop holder in combination Basic Operation a Insert the AC adapter to the attached desktop holder, with the arrows on the AC adapter's connector upward b Unfold the AC adapter's power plug and insert it into a 100V AC outlet c With FOMA terminal closed, insert it into the attached desktop holder Charging using AC adapter a Open jack cap (a) of FOMA terminal, hold the connector horizontally with the arrows side upward and insert it to the jack (b) b Unfold the power plug and insert it into a 100V AC outlet * Check that the light turns on. c When charging is over, pull out the power plug from the outlet, and pull out from FOMA terminal horizontally while pressing the release buttons on both sides of the connector * Check that the light turns on. d After charging is completed, remove FOMA terminal from the desktop holder Light AC adapter 100V AC outlet Light Power plug 100V AC outlet Connector Release buttons Power plug Insert at the back side Release buttons External connection Jack cap jack AC adapter Connector ✜ Operations for charging 22 Desktop holder When charging starts, a charge start alert sounds. While charging, the light turns on and the battery icons on the display and the sub-display blink. When charging is over, a charge completion alert sounds. F-10B_EN_ninshou Before Using Before Using Turning power ON - Configuring default setting User information Perform the following operations after turning the power ON for the first time. Check your own phone number. For details of checking/changing a mail address, refer to "Mobile Phone User's Guide [i-mode] FOMA version". a f (2 sec. or more) b On a confirmation screen of enlarged menu setting, "Yes" or "No" a me0 User information The screen shown to the right appears. Basic Operation The screen shown to the right appears. c Set required itemseC [Complete] Always set Terminal security code. If you exit without setting, Initial setting screen reappears when the power is turned ON the next time. d On a confirmation screen of software update function, g The stand-by display appears. Point ･ Besides your phone number and mail address, birthday, postal code/ Point ･ If no operation is performed, the display light is turned off automatically according to the settings in Light time-out or eco mode. The display light turns on again if there is any operation or incoming call. Turning power off : f (2 sec. or more) Changing the initial setting : mehgdg Changing screen display to English : mehbfceSelect "English" address, company name, etc. can be saved in User information. Editing user information : On User information edit screen, Ce AuthenticateeEditeC Checking the user information during a call etc. : se0 23 F-10B_EN_ninshou Screen Explanation Viewing display Basic Operation The current state can be checked by the icon appearing on the screen. Major icons are as follows. : The total calls cost exceeds the limit : Displaying SSL/TLS page etc. Top of the display : Communication using handsfree: Auto-send mail exists Battery level (Battery icon) : During i-αppli operation compatible device in progress : Handsfree ON : i-αppli call exists : eco mode ON : Alarm clock ON Ample Almost exhausted : Lock on close or Lock when immobile : Schedule reminder ON charge (Charge the battery) ON : Inside OFFICEED area Signal strength (Antenna icon) : A phonebook entry or schedule has secret attribute Out of service area or where : High-pitched alarm ON Strong Weak radio waves do not reach : Unread Area Mail exists : Self mode ON : Unread i-mode mail exists : In data transfer mode : Arrival i-concier information exists : Connecting to i-mode : Unreceived i-mode mail exists in i: Infrared communication in operation mode Center Bottom of the display 24 Arrival information (Starting from the left, missed call, recorded message, voice mail service, unread message, unread ToruCa, i-αppli call) : Silent mode ON : Call alert volume OFF : Vibrator for voice call ON : In Public mode (Drive mode) : Record message ON : Keypad dial lock ON : Personal data lock ON : Reading UIM : IC card lock ON : Available multi-cursor key : i-αppli Auto start failed : microSD card installed during Communication mode : Connected to external device using USB cable : Pedometer/ACT monitor is set : Software update rewrite notice : Auto-update of latest pattern definition failure F-10B_EN_ninshou Screen Explanation Viewing sub-display and light Task area The icon indicating the function (task) in progress appears in the task area. Task area ✜ Switching views ✜ Arrival information Guide area and key operation Operations that can be performed by pressing m, a, g, C and I are displayed in the guide area. To perform an operation in the guide area, press the corresponding key. on the guide area corresponds to multi-cursor keys k. Each time you press M, the view switches in the order of date and clock ⇒ icon and clock ⇒ big clock. When "Use" is set to Set Pedometer/Activity monitor, each time you press S, the view switches in the order of steps ⇒ activity ⇒ clock. Guide area Basic Operation Even when FOMA terminal is closed, the icons in the sub-display and light provide information. When no operation is performed for a certain period of time, the sub-display light is turned off, but it turns on again when you press either side key. When a missed call, recorded message, unread message, or voice message of Voice Mail service, etc. exists, press D with clock displayed to display the number of calls or messages, and then press S to scroll reception date/time and information about the senders. ✜ Light The light turns on or blinks when the battery charges, the camera is activated, light alert (⇒P39) is set, etc. Information ･ The light on the sub-display turns on just by tilting FOMA terminal. 【 背面自動点灯設定 (Auto light on)】 25 F-10B_EN_ninshou Screen Explanation Menu operation On the stand-by display, press m and then perform the functions from the menu. You can select a menu item with shortcut operations, which use the keypad, * and #, or with multi-cursor operation, which uses the multi-cursor key to move the cursor. Selecting "Calculator" Basic Operation Shortcut operations a me7e4 a meMove the cursor to "g Accessory"eg [Select]eMove the cursor to "d Calculator"eg [Select] Point ･ Even when a function is running, you can perform the same operation if "MENU" is displayed on the guide area. ･ To return to the previous screen, press c. To return to the stand-by display, press f. ･ On the stand-by display with Info/calendar layout, shortcut icons set, or with arrival information icon or i-concier information displayed, press g to change the display to focus mode that allows you to quickly display the related information. Multi-cursor key operations 26 Switching menu screens You can switch among "Kisekae menu", the design of which can be changed using Kisekae Tool (⇒P40), "Basic menu", which has the fixed menu numbers, and "Custom menu", to which menu items can be saved freely. A Kisekae menu matched with the color of FOMA terminal is set by default. Point ･ In some types of Kisekae menus, the menu structure is changed according to usage frequency, or the number assigned to menu item (item number) may not be applicable. ･ The menu that appears when m is pressed on the stand-by display can be changed in Select startup menu. ⇒ P35 F-10B_EN_ninshou Screen Explanation Screen Explanation Motion sensor 使いかたガイド (Guide) You can operate FOMA terminal by double-tapping (tapping it twice) or tilting it. You can check overviews and operations of functions, and troubleshooting. (In Japanese only) ✜ Stopping alarm a mef LifeKiteg GuideeSelect a search method When FOMA terminal is closed and the alarm sounds, double-tapping the front or back side stops the alarm. Tilting FOMA terminal while pressing and holding S or D when Browser screen is displayed scrolls the screen or switches the clock view orientation on the sub-display. Basic Operation ✜ Tilting FOMA terminal 目次 (Contents) : Search from a list of functions. 索引 (Index) : Search from a list of words sorted according to Japanese syllabary. フリーワード検索 (Free word search) : Enter a keyword to search for. ブックマーク (Bookmark) : Search from a list of registered bookmarks. 困ったときには (Troubleshooting) : Search from lists of troubles or error messages. Point Setting Motion sensor a meh Settings & NWserviceseg Clock & Other ef Motion sensor eSet required itemseC [Set] ･ On a description screen, select "この機能を使う (Use this function)" to perform a function. Selecting a link item in "関連機能 (Related functions)", or "→コチラ (See more)" displays a corresponding description screen. ･ Terms indicated with 【 】in this manual are index terms in "Guide". Information ･ You can also access the free word search (フリーワード検索) from the quick search. ⇒P75 27 F-10B_EN_ninshou Caller ID notification (At subscription : Notify) You can notify your phone number (caller ID) to the other party's terminal when making a voice call. Basic Operation a meh Settings & NWserviceseh NW Servicese d Caller IDea Caller ID notificationea Activate/ Deactivateea Notify Select "b Not notify" if you do not want to inform. Point ･ Caller ID is your important personal information. Carefully consider whether you want to include caller ID information when making a call. ･ If an announcement of requesting caller ID is heard when making a call, make a call again after setting Caller ID notification or adding prefix "186". 28 F-10B_EN_ninshou Appendix Specific absorption rate (SAR) of mobile phone This model phone FOMA F-10B meets the MIC's*1 technical regulation governing exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The regulation employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)*2 averaged over 10 grams of tissue. The limit includes a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The value of the limit is equal to the international guidelines recommended by ICNIRP.*3 All phone models should be confirmed to comply with the regulation, before they are available for sale to the public. The highest SAR value for this FOMA F-10B is 1.080 W/kg. It was taken by the Telecom Engineering Center (TELEC). The test for SAR was conducted according to the MIC testing procedure using standard operating positions with the phone transmitting at its highest permitted power level in all tested frequency bands. While there may be differences between the SAR levels of various phones and at various positions, they all meet the MIC's technical regulation. Although the SAR is determined at the highest certified power level, the actual SAR of the phone during operation can be well below the maximum value. For further information about SAR, please see the websites below. Others 96 World Health Organization (WHO) : http://www.who.int/peh-emf/en/ ICNIRP : http://www.icnirp.de/ MIC : http://www.tele.soumu.go.jp/e/sys/ele/index.htm TELEC : http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO : http://www.nttdocomo.co.jp/english/product/sar/ FUJITSU LIMITED : http://www.fmworld.net/product/phone/sar/ (In Japanese only) *1 Ministry of Internal Affairs and Communications. *2 The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment. *3 International Commission on Non-Ionizing Radiation Protection. Declaration of Conformity The product "F-10B" is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2.The Declaration of Conformity can be found on http://www.fmworld.net/product/phone/doc/. This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency(RF) energy, which SAR* value, when tested for compliance against the standard was 1.120W/Kg. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure. The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. ** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/ Kg) averaged over ten grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. *** Tests for SAR have been conducted using standard operation positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. F-10B_EN_ninshou Federal Communications Commission (FCC) Notice ･ This device complies with part 15 of the FCC rules. ･ Operation is subject to the following two conditions : a this device may not cause harmful interference, and b this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made in or to the radio phone, not expressly approved by the manufacturer, will void the user's authority to operate the equipment. FCC RF Exposure Information Others This model phone meets the U.S. Government's requirements for exposure to radio waves. This model phone contains a radio transmitter and receiver. This model phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy as set by the FCC of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions as accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output level of the phone. Before a phone model is available for sale to the public, it must be tested and certified to prove to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed on position and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC, when tested for use at the ear, is 1.560W/kg, and when worn on the body, is 0.649W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirements. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Equipment Authorization Search section at http:// www.fcc.gov/oet/ea/fccid/ (please search on FCC ID VQK-F10B). For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and which positions the handset at a minimum distance of 1.5 cm from the body. * In the United States, the SAR limit for wireless mobile phones used by the general public is 1.6 Watts/kg (W/kg), averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements and the network band. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 97 F-10B_EN_ninshou If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Important Safety Information Others 98 AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers flight mode or similar feature consult airline staff as to whether it can be used on board. DRIVING Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed. HOSPITALS Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment. PETROL STATIONS Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff. INTERFERENCE Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pace maker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and does not carry it in a breast pocket. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. For other Medical Devices : Please consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. F-10B_EN_ninshou Appendix Appendix Export Administration Regulations Intellectual Property Right This product and its accessories may be under coverage of the Export Administration Regulations of Japan ("Foreign Exchange and Foreign Trade Control Laws" and the related laws and regulations). And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense. For details, contact Ministry of Economy, Trade and Industry of Japan or US Department of Commerce. Copyrights and portrait rights Except for the case protected by copyright laws such as personal use, use of FOMA terminal to reproduce, alter, or publicly transmit recorded pictures or sounds, or copyrighted text, images, music or software downloaded from websites without the copyright holder's authorization is prohibited. Note that taking photos or recordings at some demonstrations, performances or exhibitions may be prohibited even when only for personal use. Avoid taking pictures of others with FOMA terminal without their consent or disclosing recorded pictures of others without their consent to general public through Internet websites etc., because they may infringe on portrait rights. Trademarks Others Company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders. ･ "FOMA", "i-mode", "i-αppli", "i-motion", "Deco-mail", "Chara-den", "ToruCa", "mopera", "WORLD CALL", "DCMX", "iD", "WORLD WING", "OFFICEED", "2in1" and logos of "FOMA", "i-mode" and "i-αppli" are trademarks or registered trademarks of NTT DOCOMO. ･ "Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation. ･ Free Dial logo mark is a registered trademark of NTT Communications Corporation. ･ McAfee® is registered trademarks or trademarks of McAfee, Inc. and/or its affiliates in the US and/or other countries. 99 F-10B_EN_ninshou ･ Contains Adobe® Flash® Lite® and Adobe Reader® Mobile technology by ･ ･ ･ ･ ･ ･ Others 100 ･ Adobe Systems Incorporated. Adobe Flash Lite Copyright© 2003-2010 Adobe Systems Incorporated. All rights reserved. Adobe Reader Mobile Copyright© 1993-2010 Adobe Systems Incorporated. All rights reserved. Adobe, Adobe Reader, Flash and Flash Lite are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. This product contains NetFront Browser, NetFront Sync Client of ACCESS CO., LTD. ACCESS, the ACCESS logo and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the United States, Japan and/or other countries. Copyright© 2010 ACCESS CO., LTD. All rights reserved. Powered by JBlend™ Copyright 2002-2009 Aplix Corporation. All rights reserved. JBlend and JBlend-related trademarks are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. QR code is a registered trademark of Denso Wave Inc. microSDHC Logo is a trademark of SD-3C,LLC. "Multitask" is a registered trademark of NEC Corporation. QuickTime is a registered trademark of Apple Inc., in the US and other countries. Microsoft®, Windows®, Windows Vista®, Windows Media® and PowerPoint® are trademarks or registered trademarks of "Microsoft Corporation" in the US and other countries. ･ The abbreviations of operating systems (Japanese versions) below are used ･ ･ ･ ･ ･ ･ in this manual. - Windows 7 stands for Microsoft® Windows® 7(Starter, Home Basic, Home Premium, Professional, Enterprise Ultimate). - Windows Vista stands for Windows Vista® (Home Basic, Home Premium, Business, Enterprise and Ultimate). - Windows XP indicates the Microsoft® Windows® XP Professional operating system or Microsoft® Windows® XP Home Edition operating system. Google and Google Map for Mobile are trademarks of Google Inc. ATOK + APOT of Justsystem Corporation is installed in this product as Japanese character conversion function. "ATOK" "APOT (Advanced Prediction Optimization Technology)" are registered trademarks of Justsystem Corporation. This product contains software licensed by Symbian Foundation Limited. Symbian is a registered trademark of Symbian Foundation Limited. "Privacy mode" is a registered trademark of FUJITSU LIMITED. "Uni-Type" is a registered trademark of LIM Corp., Ltd. Other company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders. F-10B_EN_ninshou Others ･ This product contains a module developed by the Independent JPEG Group. ･ This product is equipped with the technologies of GestureTek, Inc. Copyright© 2006-2010, GestureTek, Inc. All Rights Reserved. ･ "学研モバイル国語辞典 (Gakken Mobile JpnDic)", "学研モバイル和英辞典 ･ ･ Others (Gakken Mobile JE Dic)", "学研モバイル英和辞典 (Gakken Mobile EJ Dic)", "今 日は何の日 (Today's trivia)" and "今日の歴史 (Today in history)" are copyrighted by GAKKEN CO., LTD. This product is licensed based on MPEG-4 Visual Patent Portfolio License. The use of MPEG-4 Video Codec function is allowed for personal and nonprofit use only in the cases below. - Recording moving pictures and i-motion that conform to MPEG-4 Visual Standard (hereinafter referred to as MPEG-4 Video) - Playing MPEG-4 Videos recorded personally by consumers not engaged in profit activities - Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA For further utilizing such as promotion, in-house use or profit-making business, please contact MPEG LA, LLC in U.S. Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-protected content. If the WMDRM software fails to protect the content, content owners may ask Microsoft to revoke the software's ability to use WMDRM to play or copy protected content. Revocation does not affect unprotected content. When downloading licenses for protected content, you agree that Microsoft may include a "Revocation List" with the licenses. Content owners may require you to upgrade WMDRM to access their content. If you decline an upgrade, you cannot access a content that requires the upgrade. 101 General Inquiries (Business hours : 9:00 a.m. to 9:00 p.m.) 0120-005-250 (toll free) * Service available in: English, Portuguese, Chinese, Spanish, Korean. * Available from mobile phones and PHSs (including non-DOCOMO phones). * Unavailable from part of IP phones. (Business hours : 9:00 a.m. to 8:00 p.m. (open all year round)) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (In Japanese only) (No prefix) 151 (toll free) Repairs (Business hours : 24 hours (open all year round)) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (In Japanese only) (No prefix) 113 (toll free) * Unavailable from land-line phones, etc. 0120-800-000 (toll free) * Available from mobile phones and PHSs (including non-DOCOMO phones). * Unavailable from part of IP phones. 0120-800-000 (toll free) * Unavailable from land-line phones, etc. * Available from mobile phones and PHSs (including non-DOCOMO phones). * Unavailable from part of IP phones. ● Please confirm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site. NTT DOCOMO website http://www.nttdocomo.co.jp/english/ i-mode site iMenu⇒お客様サポート (user support)⇒ドコモショップ (docomo Shop) * In Japanese only Loss or theft of FOMA terminal or payment of cumulative cost overseas (available 24 hours a day) (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay ■ From DOCOMO mobile phones -81-3-6832-6600* (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc. ※If you use F-10B, you should dial the number ＋81-3-6832-6600 (to enter '＋', press and hold the '0' key for at least one second). ■ From land-line phones Universal number international prefix Failures encountered overseas -8000120-0151* International call access code for the country you stay -81-3-6718-1414* (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc. ※If you use F-10B, you should dial the number ＋81-3-6718-1414 (to enter '＋', press and hold the '0' key for at least one second). ■ From land-line phones Universal number international prefix -8005931-8600* * You might be charged a domestic call fee according to the call rate for the country you stay. * You might be charged a domestic call fee according to the call rate for the country you stay. ※For international call access codes for major countries/universal number ※For international call access codes for major countries/universal number international prefix, refer to DOCOMO International Services website. international prefix, refer to DOCOMO International Services website. ● If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal. ● If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan. To prevent damage to the environment, bring used battery packs to a docomo service counter, a docomo agent or a recycle center. Don't forget your mobile phone ･･･ or your manners! When using your mobile phone in a public place, don't forget to show common courtesy and consideration for others around you. 2010.X (1st Edition)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : DocMaker Create Date : 2010:07:02 10:04:49+09:00 Modify Date : 2010:07:12 13:17:41+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2010:07:12 13:17:41+09:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : L01.fm Creator : DocMaker Document ID : uuid:9d6ee940-2d06-4795-8abd-ca54535bfb9b Instance ID : uuid:69eecca5-bede-43b1-a149-4c141cbf235f Producer : Acrobat Distiller 8.1.0 (Windows) Page Count : 27EXIF Metadata provided by EXIF.tools