Fujitsu Fi 6130Z Users Manual P3PC 3342 01ENZ0

2015-01-25

: Fujitsu Fujitsu-Fi-6130Z-Users-Manual-218950 fujitsu-fi-6130z-users-manual-218950 fujitsu pdf

Open the PDF directly: View PDF PDF.
Page Count: 211 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Explains how to configure settings in the
Software Operation Panel.
Explains about troubleshooting.
Explains how to replace the consumables.
Explains how to clean the scanner.
Explains about various ways of scanning.
Explains how to use the Operator Panel.
Explains about the setting items in the
scanner drivers.
Explains how to load documents on the
scanner.
Explains the names and functions of parts
and basic scanner operation.
fi-6130Z/fi-6230Z/fi-6140Z/fi-6240Z
Appendix
Glossary
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
P3PC-3342-01ENZ0
Scanner
Overview
How to Use This Manual
Index
Introduction
Operator's Guide
Thank you for purchasing the fi-Series color image scanner.
This manual explains about the basic operations and handling of the scanner.
For information on scanner installation, connection and software installation,
refer to "Getting Started".
Glossary
Appendix
How to Use This Manual
2
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
How to Use This Manual
The following shows the tips for using this manual.
zTo display or print this manual, either Adobe® Acrobat® (7.0 or later)
or Adobe® Reader® (7.0 or later) is required.
zIn this manual, you can use the Search tool of Adobe® Acrobat® or
Adobe® Reader®.
For details, refer to the Adobe® Acrobat® or Adobe® Reader® Help.
zUse the [Page Up] key to return to the previous page, and the [Page
Down] key to go to the next page.
zClick a blue character string, tab or contents/index title (where the
mouse cursor changes into a shape such as ) to jump to the link.
- Common for all pages
- Contents page
- Index page
Jumps to the first page of each chapter.
This tab is on every page.
TOP : Jumps to the cover page.
Contents: Jumps to the contents page.
Index : Jumps to the index page.
This tab is on every page.
Jumps to this page.
Click on a title to jump to the link.
Click on a page number to jump to the link.
Introduction
3
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Introduction
Thank you for purchasing our fi-Series color image scanner.
About This Product
"This product" refers to four scanner models, which are
fi-6130Z, fi-6230Z, fi-6140Z, and fi-6240Z.
Each scanner is equipped with an Automatic Document
Feeder (ADF) that allows duplex (double-sided) scanning, and
supports USB interface.
The following table shows the differences between each
model.
: Available
- : Not available
*1 : Flatbed allows you to scan thin paper and thick documents such as a
book.
*2 : When scanning A4 size documents at 300 dpi with JPEG
compression.
Manuals
The following manuals are included for this product. Read
them as needed.
Model Scanner type Interface Scanning
speed (*2)
ADF Flatbed
(*1)
USB SCSI
fi-6130Z -- 30 ppm/60 ipm
fi-6230Z  - 30 ppm/60 ipm
fi-6140Z -40 ppm/80 ipm
fi-6240Z  40 ppm/80 ipm
Manual Description
Safety Precautions
(paper)
Contains important information about the
safe use of this product.
Make sure to read this manual before
using the scanner.
Getting Started
(paper, PDF)
Outlines the procedures from installation to
operation of the scanner.
The PDF version is included in the Setup
DVD-ROM.
Operator's Guide
(this manual) (PDF)
Provides detailed information on how to
operate and maintain the scanner daily,
how to replace the consumables, and how
to troubleshoot problems. Included in the
Setup DVD-ROM.
ScandAll PRO V2.0
User’s Guide (PDF)
Provides information on how to scan
documents by using ScandAll PRO.
Included in the Setup DVD-ROM.
fi-614PR Imprinter
Operator's Guide
(PDF)
Provides detailed information on how to
operate and maintain the option fi-614PR
imprinter daily, how to replace the
consumables, and how to troubleshoot
problems. Included in the Setup DVD-
ROM.
FUJITSU TWAIN User's
Guide (PDF)
Explains how to install and operate the
FUJITSU TWAIN driver. Included in the
Setup DVD-ROM.
Introduction
4
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
*1 : Kofax VRS Professional (hereinafter referred to as “Kofax VRS”) is
bundled with this product.
Trademarks
Microsoft, Windows, Windows Server, Windows Vista, and
SharePoint are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other
countries.
ISIS and Quick Scan are either registered trademarks or
trademarks of EMC Corporation in the United States.
Adobe, the Adobe logo, Acrobat, and Adobe Reader are either
registered trademarks or trade names of Adobe Systems
Incorporated in the United States and/or other countries.
ABBYY™ FineReader™ Engine © 2011 ABBYY. OCR by
ABBYY
ABBYY and FineReader are trademarks of ABBYY.
Kofax and VRS are registered trademarks or trademarks of
Kofax, Inc.
Other company names and product names are the registered
trademarks or trademarks of the respective companies.
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business Division,
Products Group
Solid Square East Tower,
580 Horikawa-cho, Saiwai-ku, Kawasaki, Kanagawa
212-8563, JAPAN.
Phone: (81-44) 540-4538
© PFU LIMITED 2011
Kofax VRS Installation
Guide (PDF) (*1)
Explains about the precautions for
installing Kofax VRS and other features
such as the VRS Professional features.
Included in the Setup DVD-ROM.
Image Processing
Software Option User's
Guide (PDF)
Explains how to install and operate the
Image Processing Software Option.
Included in the Setup DVD-ROM.
Scanner Central Admin
4.0 User's Guide (PDF)
Explains about the overview, installation,
operation and maintenance of Scanner
Central Admin. Included in the Setup DVD-
ROM.
Error Recovery Guide
(HTML Help)
Details the status of the scanner and
explains how to resolve problems
encountered.
Contains movies that explain how to clean
and replace the consumables. Included in
the Setup DVD-ROM.
Help (scanner driver) Explains how to use and configure the
settings for the scanner drivers.
Can be referenced from each scanner
driver.
Help (application) Explains how to use and configure the
settings for the application software.
Can be referenced from each application.
Manual Description
Conventions
5
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Conventions
Safety Information
The attached "Safety Precautions" manual contains important
information about the safe and correct use of this product.
Make sure that you read and understand it before using the
scanner.
Symbols Used in This Manual
The following indications are used in this manual to obviate
any chance of accident or damage to you, people near you,
and your property. Warning labels consist of a symbol
indicating the severity and a warning statement. The symbols
and their meanings are as follows.
Besides warning indicators, the following symbols are used in
this manual.
Abbreviations Used in This Manual
The operating systems and products in this manual are
indicated as follows.
This indication alerts operators to an operation
that, if not strictly observed, may result in severe
injury or death.
This indication alerts operators to an operation
that, if not strictly observed, may result in safety
hazards to personnel or damage to the product.
！！！
This symbol alerts operators to particularly important
information.
Be sure to read this information.
This symbol alerts operators to helpful advice regarding
operation.
Name Indication
zWindows® XP Home Edition
zWindows® XP Professional
zWindows® XP Professional x64 Edition
Windows XP
(*1)
zWindows Server® 2003, Standard Edition
zWindows Server® 2003, Standard x64 Edition
zWindows Server® 2003 R2, Standard Edition
zWindows Server® 2003 R2, Standard x64 Edition
Windows
Server 2003
(*1)
zWindows Vista® Home Basic (32/64-bit)
zWindows Vista® Home Premium (32/64-bit)
zWindows Vista® Business (32/64-bit)
zWindows Vista® Enterprise (32/64-bit)
zWindows Vista® Ultimate (32/64-bit)
Windows
Vista (*1)
zWindows Server® 2008 Standard (32/64-bit)
zWindows Server® 2008 R2 Standard (64-bit)
Windows
Server 2008
(*1)
zWindows® 7 Home Premium (32/64-bit)
zWindows® 7 Professional (32/64-bit)
zWindows® 7 Enterprise (32/64-bit)
zWindows® 7 Ultimate (32/64-bit)
Windows 7
(*1)
Conventions
6
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
*1: Where there is no distinction between the different versions of the
above operating system, the general term "Windows" is used.
Arrow Symbols in This Manual
Right-arrow symbols (J) are used to separate icons or menu
options you should select in succession.
Example: Click the [Scan] menu J [Scanner Setting].
Screen Examples in This Manual
The screen examples in this manual are subject to change
without notice in the interest of product improvement.
If the actual displayed screen differs from the screen
examples in this manual, operate by following the actual
displayed screen while referring to the user's manual of the
scanner application that you are using.
The screen examples used in this manual are of the TWAIN
driver, ISIS driver, and ScandAll PRO (image scanning
application).
This manual uses screenshots from Windows 7. The windows
that appear and the operations differ by the operating system
that you are using. Also note that with some scanner models,
the screens and operations may differ from this manual when
you update the TWAIN driver or the ISIS driver. In that case,
refer to the manual provided upon updating the driver.
zMicrosoft® Office SharePoint® Portal Server 2003
zMicrosoft® Office SharePoint® Server 2007
zMicrosoft® SharePoint® Server 2010
SharePoint
Server
ScandAll PRO ScanSnap mode Add-in ScanSnap
mode
ScanSnap Carrier Sheet Carrier Sheet
Name Indication
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
7
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Contents
How to Use This Manual ................................................................................................................................... 2
Introduction ........................................................................................................................................................ 3
Conventions ....................................................................................................................................................... 5
Chapter 1 Scanner Overview ........................................................................................................................ 14
1.1 Main Features .............................................................................................................................................................. 15
1.2 Parts and Functions .................................................................................................................................................... 16
fi-6130Z/fi-6140Z ............................................................................................................................................................ 16
fi-6230Z/fi-6240Z ............................................................................................................................................................ 19
1.3 Turning the Power ON/OFF ........................................................................................................................................ 23
How to Turn the Power ON ............................................................................................................................................ 23
How to Turn the Power OFF .......................................................................................................................................... 23
1.4 Opening/Closing the ADF ........................................................................................................................................... 24
How to Open the ADF .................................................................................................................................................... 24
How to Close the ADF.................................................................................................................................................... 24
1.5 Opening/Closing the Document Cover (fi-6230Z/fi-6240Z) ...................................................................................... 25
How to Open the Document Cover ................................................................................................................................ 25
How to Close the Document Cover ................................................................................................................................ 25
1.6 Setting Up the ADF Paper Chute ............................................................................................................................... 26
1.7 Setting Up the Stacker ................................................................................................................................................ 27
fi-6130Z/fi-6140Z ............................................................................................................................................................ 27
fi-6230Z/fi-6240Z ............................................................................................................................................................ 30
1.8 Power Saving Mode .................................................................................................................................................... 31
1.9 Basic Flow of Scanning Operation ............................................................................................................................ 32
1.10 Image Scanning Application ...................................................................................................................................... 35
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
8
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
1.11 Centralized Management of Scanners ...................................................................................................................... 36
Chapter 2 How to Load Documents ............................................................................................................. 37
2.1 Loading Documents in the ADF ................................................................................................................................. 38
Preparation..................................................................................................................................................................... 38
How to Load Documents ................................................................................................................................................ 39
2.2 Loading Documents on the Flatbed (fi-6230Z/fi-6240Z) ........................................................................................... 40
2.3 Documents for Scanning (ADF) ................................................................................................................................. 41
Paper Size...................................................................................................................................................................... 41
Conditions ...................................................................................................................................................................... 41
Loading Capacity............................................................................................................................................................ 44
Area Not to be Perforated .............................................................................................................................................. 45
Conditions for Multifeed Detection ................................................................................................................................. 45
Conditions for Mixed Batch Scanning ............................................................................................................................ 47
Conditions for Automatic Page Size Detection............................................................................................................... 49
Conditions for Using the Carrier Sheet........................................................................................................................... 50
Chapter 3 Configuring the Scan Settings ................................................................................................... 51
3.1 TWAIN Driver ............................................................................................................................................................... 52
[Resolution] .................................................................................................................................................................... 53
[Scan Type] .................................................................................................................................................................... 53
[Paper Size].................................................................................................................................................................... 53
[Image Mode] ................................................................................................................................................................. 53
[Scan] Button.................................................................................................................................................................. 53
[Preview] Button ............................................................................................................................................................. 54
[Close] / [OK] Button....................................................................................................................................................... 54
[Reset] Button................................................................................................................................................................. 54
[Help] Button................................................................................................................................................................... 54
[About] Button................................................................................................................................................................. 54
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
9
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
[Option] Button ............................................................................................................................................................... 54
[Advance] Button ............................................................................................................................................................ 55
[Config] Button................................................................................................................................................................ 55
[Browse] Button .............................................................................................................................................................. 55
3.2 ISIS Driver .................................................................................................................................................................... 56
[Main] Tab ...................................................................................................................................................................... 57
[Layout] Tab ................................................................................................................................................................... 57
[Image Processing] Tab ................................................................................................................................................. 58
[Paper Handling] Tab ..................................................................................................................................................... 59
[Gamma] Tab ................................................................................................................................................................. 59
[Color Dropout] Tab........................................................................................................................................................ 60
[Compression] Tab ......................................................................................................................................................... 60
[Imprinter] Tab ................................................................................................................................................................ 61
[Blank Page Deletion] Tab.............................................................................................................................................. 61
[About] Tab..................................................................................................................................................................... 62
Chapter 4 How to Use the Operator Panel .................................................................................................. 63
4.1 Operator Panel ............................................................................................................................................................. 64
Names and Functions .................................................................................................................................................... 64
Indications on Function Number Display........................................................................................................................ 65
Chapter 5 Various Ways to Scan ................................................................................................................. 66
5.1 Summary ...................................................................................................................................................................... 67
5.2 Scanning Documents of Different Types and Sizes ................................................................................................ 68
Scanning Both Sides at Once ........................................................................................................................................ 68
Documents with Different Widths ................................................................................................................................... 69
Documents Larger than A4/Letter Size .......................................................................................................................... 70
Scanning Photographs and Clippings ............................................................................................................................ 73
Long Page Scanning ...................................................................................................................................................... 76
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
10
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Scanning a Book (fi-6230Z/fi-6240Z) ............................................................................................................................. 78
Scanning a Large Document on the Flatbed (fi-6230Z/fi-6240Z) ................................................................................... 80
5.3 Advanced Scanning .................................................................................................................................................... 82
Removing a Color from the Scanned Image (Dropout Color) ........................................................................................ 82
Skipping Blank Pages .................................................................................................................................................... 85
Removing Punch Holes.................................................................................................................................................. 86
Scanning the Image Brighter.......................................................................................................................................... 88
Feeding Documents Manually in the ADF...................................................................................................................... 90
5.4 Configuring Post-Scan Operations and Handling .................................................................................................... 91
Automatically Correcting Skewed Images...................................................................................................................... 91
Automatically Correcting the Page Orientation .............................................................................................................. 93
Splitting the Scanned Image in Two............................................................................................................................... 95
Using the Multi Image Output......................................................................................................................................... 97
Automatically Detecting Color/Monochrome Documents ............................................................................................... 99
5.5 Customizing the Scanner Settings .......................................................................................................................... 101
Using a Button on the Scanner to Start Scanning........................................................................................................ 101
Detecting Multifeed Errors............................................................................................................................................ 103
Ignoring Multifeed for a Set Pattern.............................................................................................................................. 105
Chapter 6 Daily Care ................................................................................................................................... 108
6.1 Cleaning Materials and Locations that Require Cleaning ..................................................................................... 109
Cleaning Materials........................................................................................................................................................ 109
Location and Frequency............................................................................................................................................... 109
6.2 Cleaning the Outside ................................................................................................................................................ 110
fi-6130Z/fi-6140Z .......................................................................................................................................................... 110
fi-6230Z/fi-6240Z .......................................................................................................................................................... 110
6.3 Cleaning the Inside ................................................................................................................................................... 111
Cleaning the ADF (with Cleaning Paper) ..................................................................................................................... 111
Cleaning the ADF (with cloth)....................................................................................................................................... 112
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
11
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Cleaning the Flatbed (fi-6230Z/fi-6240Z) ..................................................................................................................... 115
6.4 Cleaning the Carrier Sheet ....................................................................................................................................... 116
Chapter 7 Replacing the Consumables ..................................................................................................... 117
7.1 Consumables and Replacement Cycles ................................................................................................................. 118
7.2 Replacing the Brake Roller ....................................................................................................................................... 119
7.3 Replacing the Pick Roller ......................................................................................................................................... 121
Chapter 8 Troubleshooting ......................................................................................................................... 124
8.1 Paper Jam .................................................................................................................................................................. 125
8.2 Error Indications on Operator Panel ....................................................................................................................... 126
Temporary Errors ......................................................................................................................................................... 127
Device Errors................................................................................................................................................................ 128
8.3 Troubleshooting ........................................................................................................................................................ 130
Scanner cannot be powered ON. ................................................................................................................................. 131
The Function Number Display switches OFF............................................................................................................... 132
Scanning does not start................................................................................................................................................ 133
Image quality is poor when scanning pictures/photos in black & white........................................................................ 134
Quality of scanned text or lines is unsatisfactory. ........................................................................................................ 135
Images are distorted or not clear.................................................................................................................................. 136
Vertical streaks appear on the scanned image. ........................................................................................................... 137
"E" (or other number/letter) is already displayed on the Function Number Display after power-on. ............................ 138
Multifeed error occurs frequently.................................................................................................................................. 139
Situation in which the document is not fed into the ADF occurs frequently.................................................................. 141
Paper jams/pick errors occur frequently....................................................................................................................... 142
Scanned images turn out elongated............................................................................................................................. 143
A shadow appears at the top or the bottom of the scanned image. ............................................................................. 144
There are black traces on the document...................................................................................................................... 145
The Carrier Sheet is not fed smoothly. / Paper jams occur.......................................................................................... 146
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
12
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Part of the image appears missing when using the Carrier Sheet. .............................................................................. 148
8.4 Before You Contact the Scanner Service Provider ................................................................................................ 149
General......................................................................................................................................................................... 149
Error Status .................................................................................................................................................................. 150
8.5 Checking the Product Labels ................................................................................................................................... 151
Location........................................................................................................................................................................ 151
Chapter 9 Operational Settings .................................................................................................................. 152
9.1 Starting Up the Software Operation Panel .............................................................................................................. 153
9.2 Password Setting ...................................................................................................................................................... 154
Setting a Password ...................................................................................................................................................... 154
Setting the [View Only mode] ....................................................................................................................................... 155
Clearing the [View Only mode]..................................................................................................................................... 156
Changing the Password ............................................................................................................................................... 157
Clearing the Password ................................................................................................................................................. 158
Resetting the Password ............................................................................................................................................... 159
9.3 Configuration Items .................................................................................................................................................. 160
Device Setting .............................................................................................................................................................. 160
Device Setting 2 ........................................................................................................................................................... 162
9.4 Settings Related to Page Counters ......................................................................................................................... 166
Checking and Resetting the Counters.......................................................................................................................... 166
Replacement Cycle of Consumables [Life Counter Alarm Setting] .............................................................................. 168
9.5 Settings Related to Scanning ................................................................................................................................... 169
Adjusting the Position to Start the Scan [Offset/Vertical magnification Adjustment] .................................................... 169
Removing Shadows/Streaks that Appear around the Scanned Image [Page Edge Filler (ADF)] /
[Page Edge Filler (FB)] (fi-6230Z/fi-6240Z)............................................................................................................... 171
Removing a Color from the Scanned Image [Dropout color]........................................................................................ 173
Shortening the Scanning Intervals [Pre-Pick]............................................................................................................... 174
Number of Paper Feeding Retries................................................................................................................................ 175
Configuring the
Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
Contents
13
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Troubleshooting
Cropping the Image Boundary [AutoCrop Boundary]................................................................................................... 176
Protecting the Documents from Being Damaged [Paper Protection] ........................................................................... 177
Specifying the Sensitivity Level for Paper Protection [Paper Protection Sensitivity] .................................................... 178
Scanning Thick Plastic Cards [Feed Mode] (fi-6140Z/fi-6240Z)................................................................................... 179
9.6 Settings Related to Multifeed Detection .................................................................................................................. 180
Specifying a Multifeed Detection Method [Multifeed] ................................................................................................... 180
Specifying the Area to Detect Multifeed [Document check area specification for Multifeed Detection]........................ 182
Specifying an Area Not to Detect Multifeed [Intelligent Multifeed Function]................................................................. 185
9.7 Settings Related to Waiting Time ............................................................................................................................ 186
Waiting Time in Manual Feed Mode [Manual-feed timeout]......................................................................................... 186
Waiting Time to Enter Power Saving Mode [Power saving] ......................................................................................... 187
9.8 Settings Related to Power ON/OFF ......................................................................................................................... 188
Method of Turning the Scanner ON/OFF [Power SW Control]..................................................................................... 188
Appendix ..................................................................................................................................................... 189
A.1 Basic Specification ................................................................................................................................................... 190
A.2 Installation Specification .......................................................................................................................................... 193
A.3 Outer Dimensions ..................................................................................................................................................... 195
fi-6130Z/fi-6140Z .......................................................................................................................................................... 195
fi-6230Z/fi-6240Z .......................................................................................................................................................... 195
A.4 Scanner Options ........................................................................................................................................................ 196
A.5 Uninstalling the Software ......................................................................................................................................... 197
Glossary ....................................................................................................................................................... 198
Index ............................................................................................................................................................. 209
Index
Contents
Appendix
Glossary
Introduction
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
Chapter 1 Scanner Overview
This chapter explains about the names and functions of the scanner components, as well as the methods for basic
operations.
1.1 Main Features.............................................................................................................................................15
1.2 Parts and Functions....................................................................................................................................16
1.3 Turning the Power ON/OFF........................................................................................................................23
1.4 Opening/Closing the ADF...........................................................................................................................24
1.5 Opening/Closing the Document Cover (fi-6230Z/fi-6240Z) ........................................................................25
1.6 Setting Up the ADF Paper Chute ...............................................................................................................26
1.7 Setting Up the Stacker................................................................................................................................27
1.8 Power Saving Mode ...................................................................................................................................31
1.9 Basic Flow of Scanning Operation .............................................................................................................32
1.10 Image Scanning Application .....................................................................................................................35
1.11 Centralized Management of Scanners .....................................................................................................36
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
15
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains about the main features of this product.
The scanner is equipped with the following features:
High speed scanning
Realizes a scanning speed of 30 ppm/60 ipm (fi-6130Z/fi-6230Z),
or 40 ppm/80 ipm (fi-6140Z/fi-6240Z) (*1). Furthermore, you can load up
to 50 sheets of documents for continuous scanning which allows you to
quickly digitize a large volume of documents.
Capable of scanning photographs, clippings, and
documents larger than A4/Letter size
The bundled "Carrier Sheet" allows you to scan documents that are
larger than A4/Letter size, as well as non-standard size documents such
as photographs and clippings. You can load multiple Carrier Sheets or
mix it with regular documents in the same batch.
Function Number Display
The scanner mounts a "Function Number Display" which displays error
indications. It is used to easily check the status of the scanner.
Improved efficiency for pre-scan work
The scanner can perform "batch scanning" which allows you to scan
documents with different paper weights and sizes at once, simplifying
the process of sorting the documents before scanning.
Reduced work loss caused by multifeeds
The scanner mounts an ultrasonic multifeed sensor that accurately
detects "multifeed" errors where two or more sheets are fed through the
scanner at once.This multifeed detection is reliable even when scanning
a mixed batch of documents with different paper weights and sizes,
avoiding potential work loss.
Intelligent Multifeed function
When there is paper of the same size attached to a designated location
on the page, the Intelligent Multifeed function enables the scanner to
recognize the location of the attachment. This allows you to continue
scanning instead of pausing the scan by detecting every paper
attachment as multifeed. Furthermore, the "paper protection" function
will reduce the risk of damaging your valuable documents.
Advanced image processing function
The scanner’s automatic detection function outputs images in color or
monochrome by the document content.
Imprinter option
Imprinter is available as an option, which is often demanded for
managing/verifying documents. Having the capability to print on the
scanned documents could drastically improve usability.
The imprinter can be installed on fi-6130Z or fi-6140Z.
Scanning on black background
Black document pad is available as an option, which allows you to
perform scanning on black background when using the flatbed. It can be
used to automatically correct skewed images or accurately detect the
size of the scanned document.
The black document pad can be used on fi-6230Z or fi-6240Z.
Centralized management of multiple scanners
The bundled "Scanner Central Admin Agent" application allows you to
manage multiple scanners together, for example, to update the scanner
settings and drivers, as well as to monitor the operating status of each
scanner.
*1: When scanning A4 size documents at 300 dpi with JPEG compression.
1.1 Main Features
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
16
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section shows the names of the scanner parts.
fi-6130Z/fi-6140Z
■Front
1.2 Parts and Functions
Stacker
Stacks up the ejected documents.
Operator panel
Consists of the Function Number Display,
buttons, and LED indicator.
Can be used to operate the scanner or
check the status.
For details, refer to "Chapter 4 How to Use
the Operator Panel" (page 63).
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet
at a time from the ADF paper chute.
Open to replace consumables or clean the
inside of the scanner.
Side guide
Guides the documents in width direction
as they are fed into the scanner.
Chute extension 2
Pull out to adjust to the document length.
ADF paper chute
Holds the documents to be scanned.
ADF release tab
Pull this tab to open the ADF.
Stacker extension 2
Lift up to adjust to the document length.
Chute extension 1
Pull out to adjust to the document length.
Stacker extension 1
Slide out to adjust to the document length.
Stacker extension 3
Lift up to adjust to the document length.
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
17
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Back
USB connector
Used to connect a USB cable.
Security cable slot
Used to connect an anti-theft security cable (commercially available).
Ventilation port
Holes for ventilating hot air from inside the scanner.
Power connector
Used to connect the power cable.
"Power cable" refers to the AC cable and AC adaptor connected together.
SCSI connector (fi-6140Z)
Used to connect a SCSI cable.
EXT connector
Used to connect the imprinter.
The imprinter is used to print text (e.g. alphabets, numbers) on the scanned
documents, and is available as an option.
It can be useful for managing documents when you add a name, date or
serial number on the scanned document.
For details, refer to "A.4 Scanner Options" (page 196).
SCSI ID switch (fi-6140Z)
Used to configure the SCSI ID (factory default: 5).
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
18
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Removable Parts
Pick roller
ADF paper chute
Brake roller
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
19
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
fi-6230Z/fi-6240Z
■Front
Stacker
Stacks up the ejected documents.
Operator panel
Consists of the Function Number Display,
buttons, and LED indicator.
Can be used to operate the scanner or
check the status.
For details, refer to "Chapter 4 How to Use
the Operator Panel" (page 63).
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet
at a time from the ADF paper chute.
Open to replace consumables or clean the
inside of the scanner.
Side guide
Guides the documents in width direction
as they are fed into the scanner.
Chute extension 2
Pull out to adjust to the document length.
ADF paper chute
Holds the documents to be scanned.
ADF release tab
Pull this tab to open the ADF.
Flatbed
For scanning documents (e.g. thin
paper, books) that cannot be scanned
with the ADF.
Chute extension 1
Pull out to adjust to the document length.
Stacker extension
Lift up to adjust to the document
length.
Transport lock switch
Locks the carrier unit (which is inside the
flatbed) to prevent damage during
transportation.
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
20
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Inside
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
21
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Back
USB connector
Used to connect a USB cable.
Security cable slot
Used to connect an anti-theft security cable (commercially available).
Ventilation port
Holes for ventilating hot air from inside the scanner.
Power connector
Used to connect the power cable.
"Power cable" refers to the AC cable and AC adaptor connected together.
SCSI connector (fi-6240Z)
Used to connect a SCSI cable.
SCSI ID switch (fi-6240Z)
Used to configure the SCSI ID (factory default: 5).
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
22
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Removable Parts
Pick roller
ADF paper chute
Brake roller
Document cover
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
23
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains how to power on/off the scanner.
How to Turn the Power ON
1Press the [Power] button on the operator panel.
DThe scanner is turned on, and the [Power] button lights in green.
During initialization, the Function Number Display changes in the
following order: "8" J "P" J "0" J "1". "1" indicates that the
scanner is ready.
How to Turn the Power OFF
1Press the [Power] button on the operator panel for more
than 2 seconds.
DThe scanner is turned off, and the [Power] button switches off.
1.3 Turning the Power ON/OFF
The method by which the scanner is powered on/off can be
specified from one of the following:
zPress the [Power] button on the operator panel
zUnplug the power cable then plug it back in
zHave the scanner turn on/off in sync with the computer's
power
For details, refer to "Method of Turning the Scanner ON/OFF
[Power SW Control]" (page 188).
！！！
When connected via SCSI, turn on the scanner and confirm
that "1" is displayed on the Function Number Display before
you turn on the computer.
Check
Function
Send to
Scan
/Stop
Power
[Power] Button
When you press the [Power] button, the LED indicator will
flash once. Note that this is an initial diagnosis and not a
malfunction.
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
24
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section describes how to open and close the ADF.
How to Open the ADF
1Remove all documents from the ADF paper chute.
2Pull the ADF release tab towards you to open the ADF.
How to Close the ADF
1Close the ADF.
Push the center of the ADF until it locks in place.
1.4 Opening/Closing the ADF
Be careful not to have your fingers caught
when the ADF closes.
ADF release tab
Be careful not to have your fingers caught
when the ADF closes.
！
！
！Make sure that there is no foreign matter caught inside
the ADF.
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
25
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section describes how to open and close the document
cover.
How to Open the Document Cover
1Open the document cover.
How to Close the Document Cover
1Gently close the document cover.
1.5 Opening/Closing the Document Cover (fi-6230Z/fi-6240Z)
Document cover
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
26
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Documents loaded in the ADF paper chute are fed into the
ADF one by one.
Using the chute extensions will keep the documents straight
and feed them smoothly.
1Pull out chute extension 1.
2Pull out chute extension 2.
1.6 Setting Up the ADF Paper Chute
Make sure to hold the scanner while you pull out the
chute extension.
Chute extension 1
Make sure to hold the scanner while you pull out the
chute extension.
Chute extension 2
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
27
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Documents loaded in the ADF paper chute are ejected onto
the stacker one by one.
Using the stacker and stacker extensions will keep the
documents straight and stack them neatly.
fi-6130Z/fi-6140Z
■A6 (landscape) or larger
1Bring down the stacker from the top towards you.
2Slide out the stacker extension 1 towards you.
1.7 Setting Up the Stacker
Stacker
Stacker extension 1
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
28
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
3Lift up the stacker extension 2 towards you.
Stacker extension 2
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
29
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■A7 (landscape) or smaller
1Bring down the stacker from the top towards you.
2Lift up the stacker extension 3.
Stacker
！！！
Do not bend the stacker extension more than 90 degrees,
because it may break.
Stacker extension 3
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
30
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
fi-6230Z/fi-6240Z
■A5 (portrait) or larger
1Lift up the stacker towards you.
■A6 (portrait)/A5 (landscape) or smaller
1Lift the stacker extension.
Stacker
！！！
Do not bend the stacker extension more than 90 degrees,
because it may break.
Stacker extension
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
31
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Power saving mode keeps the power consumption low when
the scanner has not been used for a certain period of time.
If the scanner is left powered on for 15 minutes without being
used, it automatically enters power saving mode.
When it enters power saving mode, the Function Number
Display switches off but the [Power] button remains lit in
green.
To resume from power saving mode, perform one of the
following:
zLoad a document in the ADF paper chute
zPress any button on the operator panel
Note that pressing the [Power] button for more than 2 seconds will
turn the power off.
zPerform scanning from an application
1.8 Power Saving Mode
！
！
！The scanner may not enter power saving mode if there was a
document remaining on the paper path.
For details about how to remove documents, refer to "8.1
Paper Jam" (page 125).
The waiting time for entering power saving mode can be
changed in the Software Operation Panel.
For details, refer to "Waiting Time to Enter Power Saving Mode
[Power saving]" (page 187).
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
32
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains about the basic flow of performing a
scan.
In order to perform a scan, you need a scanner driver and an
application that supports the scanner driver.
This product bundles the TWAIN driver and the ISIS driver
(compliant to the respective standards), Kofax VRS, and an
application called "ScandAll PRO" which supports both drivers
and Kofax VRS.
The following describes the normal procedure for scanning.
1Turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
2Load a document face-down in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
1.9 Basic Flow of Scanning Operation
zFor details about the scanner drivers, refer to:
-"Chapter 3 Configuring the Scan Settings" (page 51)
- TWAIN driver Help
- ISIS driver Help
zFor details about Kofax VRS, refer to:
- Kofax VRS Help
zFor details about ScandAll PRO, refer to:
- ScandAll PRO V2.0 User’s Guide
- ScandAll PRO Help
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
33
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
3Start an application for scanning.
ScandAll PRO will be used here as an example to explain the
procedure.
For details about how to start up ScandAll PRO, refer to "ScandAll
PRO V2.0 User’s Guide".
4Select a scanner driver.
5Select a scanner.
Example: ScandAll PRO
TWAIN driver:
ISIS driver:
Kofax VRS:
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
34
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
6Launch the scanner driver from the application. 7In the scanner driver's setup dialog box, configure the
scan settings.
8In ScandAll PRO, select the [Scan] menu J [Scan].
For details about scanning with ScandAll PRO, refer to "ScandAll
PRO V2.0 User’s Guide".
9Save the scanned image to a file.
TWAIN driver:
ISIS driver:
Kofax VRS:
！
！
！Do not unplug the USB cable or log off the user account
when the scanner and the computer are communicating,
for instance, during scanning.
Procedures and operations slightly vary depending on the
application used.
For more details about scanning with ScandAll PRO, refer
to "ScandAll PRO V2.0 User’s Guide".
To perform scanning with other applications, refer to the
manual bundled with the application.
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
35
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains about the bundled “ScandAll PRO”
image scanning application, which is used as an example to
explain the procedures in this manual.
ScandAll PRO supports both TWAIN and ISIS drivers. By
defining scan settings as profiles, you can customize the
settings according to your preference.
When ScandAll PRO is installed, you can also install
“ScanSnap mode”. This is an add-in application which
provides a different set of driver settings as an alternative to
using ScandAll PRO. TWAIN driver is required to use this
application. Using the ScanSnap mode enables easy
scanning with a single button.
"Chapter 5 Various Ways to Scan" (page 66) explains how to
scan different types of documents by using examples of the
TWAIN driver started via ScandAll PRO.
For more details about ScandAll PRO, refer to “ScandAll PRO
V2.0 User’s Guide”.
1.10 Image Scanning Application
！
！
！You cannot use ScanSnap mode in the following cases:
zWhen the scanner is connected to fi-5000N
zWhen the scanner is connected with a SCSI cable
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
36
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains about managing a large number of
scanners in a unified manner by providing the following
capabilities.
zSimultaneously update settings for multiple scanners and their
drivers.
Because there is no need to update each scanner one by one, a
significant reduction is achieved in the time required to update a large
number of scanners.
zMonitor scanners to check for any consumable parts that require
replacement, or the occurrence of errors.
The alerts for consumable part replacement and errors are provided
by scanners, which provides an easy way of checking the operating
status of scanners.
To enable the above functions, "Scanner Central Admin" is
required which consists of four applications bundled with this
product:
zScanner Central Admin Server
Install this application in the main computer that is used for the
centralized management of scanners.
By registering scanners on the Scanner Central Admin Server, you
can build a system to run a unified management for all scanners.
zScanner Central Admin Console
Install this application in a computer to upload update modules and to
monitor the operating status of the scanners.
The administrators can perform these tasks from the Scanner Central
Admin Console window, where they can also check the alerts for
consumable replacement and errors sent from the scanners.
zScanner Central Admin Agent
Install this application in a computer connected to a scanner. It allows
scanners to link with the Scanner Central Admin Server.
Linking with the Scanner Central Admin Server will enable you to
apply updates on scanner settings, and the scanner can also send
alerts on consumable replacement and errors.
zSCAModule Creator
Use this application to create update modules to upload onto the
Scanner Central Admin Server.
It is only required for creating update modules.
For more details, refer to the Scanner Central Admin 4.0
User’s Guide.
1.11 Centralized Management of Scanners
Scanner Central
Admin Server
Scanner Central
Admin Agent
Scanner Central
Admin Agent
Scanner Central
Admin Agent
Scanner Central
Admin Agent
Scanner Scanner Scanner Scanner
Administrator
Upload update modules/
check update status
Alerts for consumable part
replacement and errors
Alerts for consumable part
replacement and errors
Scanner Central
Admin Console
SCAModule
Creator
Update
module
Update
:
:
Index
Appendix
Glossary
Introduction
Contents
TOP
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Chapter 2 How to Load Documents
This chapter explains how to load documents on the scanner.
2.1 Loading Documents in the ADF..................................................................................................................38
2.2 Loading Documents on the Flatbed (fi-6230Z/fi-6240Z).............................................................................40
2.3 Documents for Scanning (ADF)..................................................................................................................41
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
38
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
This section explains how to load documents in the ADF.
Preparation
1If you are loading multiple sheets, check the documents.
1 Check if the documents to be loaded are of the same width or
different widths.
Ways to load documents differ depending on whether they are the
same width or not.
If the document width varies, refer to "Conditions for Mixed Batch
Scanning" (page 47) or "Documents with Different Widths" (page
69).
2 Check the number of sheets.
Up to 50 sheets can be loaded (with paper weight of 80 g/m² [20 lb]
and thickness of the document stack under 5 mm).
For details, refer to "Loading Capacity" (page 44).
2Fan the documents.
1 Grab a stack of documents, which should be 5 mm or less.
2 Hold both ends of the documents and fan them a few times.
3 Rotate the documents by 90 degrees and fan them in the same
manner.
4 Perform steps 1 to 3 for all documents.
5 Align the edges of the documents.
2.1 Loading Documents in the ADF
For details about the paper size and quality required for normal
operations, refer to "2.3 Documents for Scanning (ADF)" (page
41).
For more details about how to fan documents, refer to the
Error Recovery Guide.
The Error Recovery Guide is included in the Setup DVD-
ROM. For details about installation, refer to "Installing the
Software" in Getting Started.
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
39
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
How to Load Documents
1Pull out the chute extensions according to the length of
the document.
For details, refer to "1.6 Setting Up the ADF Paper Chute" (page 26).
2Lift the stacker and stacker extension according to the
length of the document.
For details, refer to "1.7 Setting Up the Stacker" (page 27).
3Load the document face-down in the ADF paper chute.
4Adjust the side guides to the width of the document.
Do not leave space between the side guides and the document.
Otherwise, the document may be fed skewed.
5Start up an application for scanning and perform a scan.
For details about the scanning procedure in ScandAll PRO, refer to
"ScandAll PRO V2.0 User’s Guide".
！！！
Remove all paper clips and staples. Reduce the number
of sheets if a multifeed or pick error occurs.
Side guide
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
40
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
1Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2Load a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
3Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
4Start up an application for scanning and perform a scan.
For details about the scanning procedure in ScandAll PRO, refer to
"ScandAll PRO V2.0 User’s Guide".
2.2 Loading Documents on the Flatbed (fi-6230Z/fi-6240Z)
ABC
ABC
ABC
Reference point
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
41
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Paper Size
The following paper sizes can be scanned.
A: 52 to 216 mm (2.1 to 8.5 in.)
B: 74 to 355.6 mm (2.9 to 14.0 in.) (*1)
C: 74 to 216 mm (2.9 to 8.5 in.)
D: 52 to 355.6 mm (2.1 to 14.0 in.) (*1)
*1: Long page scanning supports documents with a length up to 3,048 mm
(120 in.).
Conditions
Paper type
The following paper types are recommended:
zWood-free paper
zWood-containing paper
zPPC paper (recycled)
zPlastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper weight (thickness)
The following paper weights can be used:
z41 to 209 g/m² (11 to 56 lb)
z127 to 209 g/m² (34 to 56 lb) for A8 size
z1.4 mm or less for plastic cards (*1)
*1: Up to 1.25 mm is supported for scanning at 200 dpi (60 ppm) in
landscape when using fi-6140Z/fi-6240Z. This setting can be
changed in the Software Operation Panel to scan plastic cards with
a thickness up to 1.4 mm. For details, refer to " Scanning Thick
Plastic Cards [Feed Mode] (fi-6140Z/fi-6240Z)" (page 179).
2.3 Documents for Scanning (ADF)
Feed direction
Feed direction
A
B
C
D
Portrait Landscape
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
42
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Precautions
The following types of documents may not be scanned successfully:
zDocuments of non-uniform thickness (e.g. envelopes, documents with
attachments)
zWrinkled or curled documents
zFolded or torn documents
zTracing paper
zCoated paper
zCarbon paper
zPhotosensitive paper
zPerforated documents
zDocuments that are not square or rectangular
zThin paper (less than 41 g/m²)
zPhotographs (photographic paper)
The following types of documents must not be scanned:
zPaper-clipped or stapled documents
zDocuments on which the ink is still wet
zDocuments smaller than A8 size (portrait)
zDocuments wider than 216 mm (8.5 in.)
zDocuments other than paper/plastic card such as fabric, metal foil
and OHP film
zImportant documents such as certificates and cash vouchers which
must not be damaged
！！！
zSince carbonless papers contain chemical substances that
may harm the rollers (e.g. pick roller), take note of the
following.
zWhen scanning wood-containing papers, the life of the
brake roller and pick roller may end sooner compared to
scanning wood-free papers.
zBrake roller and pick roller may be damaged when a photo/
sticky note on the document contacts these parts during
scanning.
zThe surface of the document may be damaged when
scanning gloss papers such as photographs.
Cleaning : If paper jams occur frequently, clean the
brake roller and pick roller.
For details about cleaning, refer to
"Chapter 6 Daily Care" (page 108).
Consumable
replacement
: The life of the brake roller and pick roller
may end sooner compared to scanning
wood-containing papers.
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
43
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
！！！
zWhen you scan plastic cards, take note of the following.
- Up to three plastic cards can be loaded in the ADF paper
chute.
Note that you can only load one card at a time if the
plastic card is embossed.
- It is recommended to place the card face-down in the
ADF paper chute.
- Cards should be within the following specifications:
ISO7810 ID-1 type compliant
Make sure to check if the card can be scanned first.
*1: Up to 1.25 mm is supported for scanning at 200 dpi (60
ppm) in landscape when using fi-6140Z/fi-6240Z. This
setting can be changed in the Software Operation Panel
to scan plastic cards with a thickness up to 1.4 mm. For
details, refer to " Scanning Thick Plastic Cards [Feed
Mode] (fi-6140Z/fi-6240Z)" (page 179).
- Rigid cards may not be fed properly.
- If the surface of the card is dirty with grease marks (e.g.
fingerprints) and such, perform scanning after wiping the
dirt off.
BACKBACK
Size : 85.6 × 53.98 mm
Thickness : 1.4 mm or less (*1)
Material : PVC (polyvinyl chloride) or PVCA (polyvinyl
chloride acetate)
- Plastic cards cannot be scanned when the imprinter is
connected.
- Scanning thick documents such as plastic cards will be
falsely detected as multifeed. In that case, disable
multifeed detection.
zWhen scanning semi-transparent documents, increase the
brightness for scanning to avoid bleed-through.
zWhen you scan documents written in lead pencil, make
sure to clean the rollers frequently. Otherwise, the rollers
will be contaminated which may leave black traces on the
document or cause feeding errors.
For details about cleaning, refer to "Chapter 6 Daily Care"
(page 108).
zIf multifeeds, pick errors or paper jams occur frequently,
refer to "8.3 Troubleshooting" (page 130).
zWhen you scan documents with the ADF, all documents
must be flat on the leading edge. Make sure that curls on
the leading edge of the documents are kept within the
following range.
30 mm or more
Feeding direction
3 mm
or less
5 mm
or less
30 mm or more
Feeding direction
(0.20 in.)
(0.12 in.)
(1.18 in.) (1.18 in.)
Leading edgeLeading edge Scanned side Scanned side
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
44
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Loading Capacity
The number of sheets that can be loaded in the ADF paper
chute is determined by the paper size and paper weight.
See the graph below.
50
35
29
60
60
50
40
30
20
10
052
41 64
(g/m
2
)
80 104 127
50
41
29
24 25
157
20
A4/Letter or smaller
Legal
19
209
15
Paper weight
Capacity (sheets)
Unit Conversion
g/m² 41 52 64 75 80 90 104 127 157 209
lb 11 14 17 20 21 24 28 34 42 56
kg 35 45 55 64.5 69 77.5 90 110 135 180
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
45
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Area Not to be Perforated
An error may occur when there are punched holes in the
shaded area in the following figure. Such documents can be
scanned by using the flatbed (fi-6230Z/fi-6240Z).
Conditions for Multifeed Detection
Multifeed is an error where two or more sheets are fed through
the ADF at once. It is also called a multifeed when a different
document length is detected.
Multifeed detection is performed by either checking the
overlapping of documents, length of the documents, or the
combination of both. The following conditions are required for
an accurate detection.
Detection by overlapping
zLoad documents of the same paper weight in the ADF paper chute.
zPaper weight: 41 to 209 g/m² (11 to 56 lb)
zDo not punch holes within 35 mm (1.38 in.) over the center of the
document. See Fig.1.
zDo not attach other documents within 35 mm (1.38 in.) over the
center of the document. See Fig.1.
Detection by length
zLoad documents of the same length in the ADF paper chute.
zVariance in document lengths: 1% or less
zDo not punch holes within 35 mm (1.38 in.) over the center of the
document. See Fig.1.
Detection by overlapping and length
zLoad documents of the same paper weight and length in the ADF
paper chute.
zPaper weight: 41 to 209 g/m² (11 to 56 lb)
zVariance in document lengths: 1% or less
zDo not punch holes within 35 mm (1.38 in.) over the center of the
document. See Fig.1.
zDo not attach other documents within 35 mm (1.38 in.) over the
center of the document. See Fig.1.
！！！
The above condition applies when the document is set to the
center of the pick roller width.
If there are any holes in the 35 mm-wide central column, you
can move the document to the left or right to avoid an error.
( Unit : mm)
Top
Reference point
Front side
Feed
direction
Bottom
35
Center
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
46
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Fig. 1
！
！
！zThe above condition applies when the document is set to
the center of the pick roller width.
zWhen you use detection by overlapping, scanning thick
documents such as plastic cards will be falsely detected as
multifeed. In that case, disable multifeed detection.
( Unit : mm)
Top
Reference point
Front side
Feed
direction
Bottom
35
Center
zAccuracy of multifeed detection may drop with some
documents.
Multifeed cannot be detected for the top 30 mm of a
document.
zFor the shaded area in Fig. 1, you can also specify a length
not to detect multifeeds in the Software Operation Panel.
For details, refer to "9.6 Settings Related to Multifeed
Detection" (page 180).
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
47
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Conditions for Mixed Batch Scanning
The following conditions apply when scanning a mixed batch
of documents with different paper weights/friction coefficients/
sizes. Make sure to test a few sheets first to check if the
documents can be scanned.
For details about scanning, refer to "Documents with Different
Widths" (page 69).
Paper direction
Align the direction of the paper fiber with the feed direction.
Paper weight
The following paper weights can be used:
41 to 209 g/m² (11 to 56 lb)
Friction coefficient
It is recommended to use the same type of paper from the same
manufacturer.
When papers of different manufacturers/brands are mixed, it affects the
feeding performance as the difference in the friction coefficient
increases.
The following friction coefficients are recommended:
0.35 to 0.60 (reference value for paper friction coefficient)
Document position
Use paper sizes that fit the 39 mm width of the pick roller in the center.
Paper size
When you scan a mixed batch with different sizes, not feeding the
documents straight may cause paper jams or part of the image to
appear missing.
It is recommended to check the documents thoroughly before scanning
and also check the image if the document was skewed.
Documents that cannot be scanned in a mixed batch
The following types of documents cannot be mixed in the same batch:
zCarbonless paper
zBond paper
zPerforated documents
zThermal paper
zCarbon-backed paper
zOHP film
zTracing paper
39 mm
Pick roller
！
！
！zWhen scanning a mixed batch with different sizes,
documents are more likely to skew because the side guides
do not contact every sheet.
zDo not use [Check Length] or [Check Overlapping and
Length] for multifeed detection.
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
48
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Combinations of standard paper sizes in a mixed batch
Refer to the table below for a guideline of the range available for mixed
batch scanning.
However, note that not feeding the documents straight may cause paper
jams or part of the image to appear missing.
It is recommended to check the documents thoroughly before scanning
and also check the image if the document was skewed.
LTR: Letter size
(P) : Portrait
(L) : Landscape
Maximum size LTR (P)
Carrier Sheet
A4 (P)
A5 (L)
B5 (P)
B6 (L)
A5 (P)
A6 (L)
B6 (P)
B7 (L)
A6 (P)
A7 (L)
B7 (P)
B8 (L)
A7 (P)
A8 (L)
B8 (P) A8 (P)
Width (mm) (*1) 216 210 182 149 129 105 91 74.3 64.3 52.5
Minimum size
LTR (P)
Carrier Sheet 216
A4 (P)
A5 (L) 210
B5 (P)
B6 (L) 182 Available range
A5 (P)
A6 (L) 149
B6 (P)
B7 (L) 129
A6 (P)
A7 (L) 105
B7 (P)
B8 (L) 91
A7 (P)
A8 (L) 74.3
B8 (P) 64.3
A8 (P) 52.5
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
49
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
*1: The following picture shows how to set the widest and the
narrowest documents of the batch between the side
guides.
Conditions for Automatic Page Size Detection
[Automatic Page Size Detection] does not work with the
following types of documents:
zNon-rectangular documents
zDocuments with black background/edges
[Automatic Page Size Detection] may not work with the
following types of documents:
zThin paper (52 g/m² [14 lb] or less)
zDocuments with dark background/edges
！
！
！B8 (portrait) and A8 (portrait) cannot be scanned with other
paper sizes.
Maximum width
Minimum width
Side guide
Narrowest document
Widest document
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
50
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Conditions for Using the Carrier Sheet
■Paper size
The following paper sizes can be scanned:
zCarrier Sheet (216 × 297 mm)
zA3 (297 × 420 mm)(*1)
zA4 (210 × 297 mm)
zA5 (148 × 210 mm)
zA6 (105 × 148 mm)
zB4 (257 × 364 mm)(*1)
zB5 (182 × 257mm)
zB6 (128 × 182 mm)
zPost card (100 × 148 mm)
zBusiness card (91 × 55 mm, 55 × 91 mm)
zLetter (8.5 × 11 in./216 × 279.4 mm)
zDouble Letter (11 × 17 in./279.4 × 431.8 mm)(*1)
zCustom size
Width : 25.4 to 216 mm (1 to 8.5 in.)
Length : 25.4 to 297 mm (1 to 11.69 in.)
*1: Fold in half for scanning.
■Conditions
Paper type
The following paper type is recommended:
zStandard office paper
Paper weight
The following paper weights can be used:
zUp to 127 g/m² (34 lb)
zUp to 63.5 g/m² (17 lb) when folded in half
Precautions
Take note of the following:
zUp to three Carrier Sheets can be loaded at once.
zDepending on the amount of memory used by running applications,
there may be insufficient memory to scan a double-page spread
document with the Carrier Sheet in high resolution. In that case,
specify a lower resolution and try scanning again.
zDo not write on, color, stain, or cut the end with a black and white
pattern on the Carrier Sheet.
zDo not place the Carrier Sheet upside down. Otherwise, a paper jam
may occur and damage the Carrier Sheet and the document inside.
zDo not leave your document inside the Carrier Sheet for a long time.
Otherwise, the ink on the document may be transferred onto the
Carrier Sheet.
zTo avoid deformation, do not use or leave the Carrier Sheet in high
temperature places such as under direct sunlight or near a heating
apparatus for a long time.
zDo not fold or pull the Carrier Sheet.
zDo not use a damaged Carrier Sheet because it may damage or
cause the scanner to malfunction.
zTo avoid deformation, keep the Carrier Sheet on a flat surface without
any weight on it.
zBe careful not to cut your finger on the edge of the Carrier Sheet.
zIf paper jams occur frequently, feed about 50 sheets of PPC paper
(recycled paper) before scanning with the Carrier Sheet.
The PPC paper can either be blank or printed.
zPaper jams may occur when you place several small documents (e.g.
photos, postcards) in the Carrier Sheet for scanning. It is
recommended to place only one document at a time in the Carrier
Sheet.
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
Chapter 3 Configuring the Scan
Settings
This chapter explains about the scan parameters of the scanner drivers.
3.1 TWAIN Driver..............................................................................................................................................52
3.2 ISIS Driver ..................................................................................................................................................56
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
52
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
The TWAIN driver is a driver that conforms to the TWAIN
standard. It can be used with an application that supports
TWAIN to perform scanning.
Normally, the scanner driver is launched via an application,
and then the scan settings are configured in the setup dialog
box of the driver (some applications may not display the setup
dialog box).
Settings for TWAIN driver are configured in the above dialog
box.
The following are descriptions of the main configuration items.
For details, refer to the TWAIN driver Help.
3.1 TWAIN Driver
Ways to launch the scanner driver differ depending on the
application.
For more details, refer to the manual or the Help files of the
application.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
53
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Resolution]
Specify the resolution for scanning.
You can either select a predefined value from the list, or
specify a custom resolution which can range between 50 dpi
and 600 dpi (in increments of 1 dpi).
Also, selecting the [Predefine] check box allows you to
perform scanning easily by selecting a predefined resolution
from [Best], [Better] and [Normal].
Values in [Predefine] can be changed by clicking the [...]
button.
[Scan Type]
Specify the scanning side(s) from the following:
zADF Front Side
zADF Duplex
zLong Page (Front side)
zLong Page (Duplex)
zFlatbed (fi-6230Z/fi-6240Z)
zADF Back Side
zDouble-page spread
zClipping (Front)
zClipping (Duplex)
[Paper Size]
Select a paper size from the drop-down list.
Up to three custom sizes can be added to the list by using the
[...] button.
You can also change the order in which the items (sizes) are
listed.
[Image Mode]
Specify the type of scanned image.
[Scan] Button
Click this button to start scanning by the current settings.
Item Description
Black & White Scans in binary (black & white) mode.
Halftone Scans via halftone processing in binary (black &
white) mode.
Grayscale Scans in gradations from black to white.
Select [Grayscale] (256) or [4bit Grayscale] (16
grayscale).
Color Scans in color mode. Select [24bit Color], [256
Color] or [8 Color].
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
54
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Preview] Button
Allows you to preview the scanned image.
Perform a test scan by the current settings and display the
result in the preview window.
[Close] / [OK] Button
Click this button to save the current settings and close the
window.
[Reset] Button
Click this button to undo the changes made.
[Help] Button
Displays the TWAIN driver Help which can also be displayed
by the [F1] key.
[About] Button
Displays the version information of TWAIN driver.
[Option] Button
Configure the optional settings in the following window.
z[Rotation] Tab
Includes the binding direction of double-sided documents, image
rotation, deskew, page size detection, end of page detection,
overscan, hole punch removal, and image split.
z[Job/Cache] Tab
Includes caching, multifeed detection, and blank page skip.
z[Imprinter (Endorser)] Tab
Includes print settings for the imprinter which is available separately.
Displayed only when the imprinter is installed.
z[Generic] Tab
Specify the measurement unit to display in the [TWAIN Driver (32)]
dialog box.
Select from inch, mm, and pixel.
z[Startup] Tab
Includes settings related to the operator panel on the scanner.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
55
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
z[Filter] Tab
Select the filter for image processing.
z[Compression] Tab
Specify the compression rate for JPEG transfer.
[Advance] Button
Click this button to configure detailed settings related to image
processing.
Items such as gamma pattern, dropout color, reverse and
edge extract can be configured.
[Config] Button
Click this button to manage the setup files.
Scan settings can be changed easily if you save the settings
configured in the [TWAIN Driver (32)] dialog box onto a file
under [Setting Files].
[Browse] Button
Click this button to view a list of connected scanners.
Item Description
Digital Endorser Adds alphanumeric character strings on the
scanned image data.
Page Edge Filler Fills in the margins of the scanned image in
a specified color.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
56
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
The ISIS driver is a driver that conforms to the ISIS standard.
It can be used with an application that supports ISIS to
perform scanning.
Normally, the scanner driver is launched via an application,
and then the scan settings are configured in the setup dialog
box of the driver (some applications may not display the setup
dialog box).
Settings for ISIS driver are configured in the above dialog box.
For details, refer to the ISIS driver Help.
3.2 ISIS Driver
Ways to launch the scanner driver differ depending on the
application.
For more details, refer to the manual or the Help files of the
application.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
57
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Main] Tab
Includes settings such as the scanning side(s), color mode
(color/grayscale/black & white), resolution, brightness and
contrast.
[Layout] Tab
Includes settings such as the page orientation, feeding
direction, Carrier Sheet mode, paper size and image split.
Clicking the [Scan Area] button displays the [Scan Area]
dialog box.
！
！
！Note that [Automatic] in [Image Orientation] is available only
when ScandAll PRO is installed.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
58
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Scan Area] Dialog Box
The scanning area for the specified paper size can be
selected.
[Image Processing] Tab
You can select a configuration pattern that is used frequently
for scanning. This tab also includes a setting for hole punch
removal.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
59
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Paper Handling] Tab
Includes settings related to document feeding.
Select a method from the following:
zAutomatic (fi-6230Z/fi-6240Z)
zADF
zFlatbed (fi-6230Z/fi-6240Z)
This tab also includes settings such as pre-pick (i.e. feeding
the document to the starting position before scanning), paper
protection and multifeed detection.
[Gamma] Tab
Includes settings related to gamma pattern. You can also
customize detail settings such as the gamma value and
brightness.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
60
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Color Dropout] Tab
Select a color to remove from the scanned image.
[Compression] Tab
Select a compression rate and the image quality for scanning
in color/grayscale.
You can also configure a sample ratio used for compression.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
61
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[Imprinter] Tab
Includes print settings for the imprinter which is available
separately.
Displayed only when the imprinter is installed.
[Blank Page Deletion] Tab
Includes settings for deleting blank pages.
When scanning in black & white, you can use the dot ratio to
process the blank page(s) for white and black backgrounds
separately.
When scanning in grayscale/color, you can use the sensitivity
to process the blank page(s) for white and black backgrounds
together.
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
62
How to Load
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Use the
Operator Panel
[About] Tab
Select this tab to view information related to the version of the
ISIS driver as well as the scanner connected to the computer.
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
Chapter 4 How to Use the Operator
Panel
This chapter explains how to use the operator panel.
4.1 Operator Panel ...........................................................................................................................................64
Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
64
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
The operator panel consists of the Function Number Display,
buttons, and LED indicator.
Names and Functions
4.1 Operator Panel
Check
Function
Send to
Scan
/Stop
Power
LED indicator
Lights in orange when an error occurs.
Flashes when the ADF is open.
Function Number Display
Indicates the status of the scanner.
Switches off when the scanner enters power saving mode.
[Send to] button (*1)
Launches the linked application software.
Clears the displayed error indication.
Pauses the scan. (*2)
[Scan/Stop] button (*1)
Launches the linked application software.
Clears the displayed error indication.
Cancels or resumes the scan.
[Power] Button
Turns the power on/off.
Lights in green when the scanner is turned on.
[Function] button
Switches the number (1 to 9/C) assigned to the application
launched by the [Send to] button.
*1: For details about how to scan by pressing the [Scan/Stop] or
[Send to] button, refer to the TWAIN driver Help (included in the
Setup DVD-ROM) or "Using a Button on the Scanner to Start
Scanning" (page 101).
*2: When using TWAIN driver, pressing the [Send to] button during
scanning will pause the scan after that document is scanned.
When using ISIS driver/Kofax VRS/ScanSnap mode, pressing the
[Send to] button during scanning will cancel the scan after that
document is scanned.
！！！
Do not use the operator panel while the Software Operation
Panel is running.
Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
65
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
Indications on Function Number Display
Display Description
8 Displayed when the scanner has just been powered on.
P Processing initialization.
0 Initialization is almost complete.
1 Ready to start scanning.
Indicates that the initialization was successfully completed.
This is referred to as "ready" status.
Function
number
(flash)
A function number will flash after detecting a multifeed.
This indication prompts whether or not to memorize the
overlap pattern.
For details, refer to "Ignoring Multifeed for a Set Pattern"
(page 105).
c
(flash)
Indicates that the ADF was opened when the status was
ready ("1").
Note that the LED indicator will also flash.
To return to ready ("1") status, close the ADF by
For details, refer to "1.4 Opening/Closing the ADF" (page
24).
If the display does not return to ready ("1") after closing the
ADF, turn the power off then back on.If the problem still
persists, contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
P
(flash)
Indicates that the scan was paused by pressing the [Send
to] button.
Press the [Scan/Stop] button to resume the scan.
J
U
Indicates that a temporary error occurred during scanning.
The display will switch between either "J" or "U", and an
"error number".
For information about the error details, refer to "Temporary
Errors" (page 127).
The display will return to ready ("1") if the [Scan/Stop] or
[Send to] button is pressed.
E
F
C
H
A
L
Indicates that a device error (alarm) occurred during
initialization or scanning.
The display will switch between either "E'", "F", "C", "H", "A"
or "L", and an "alarm number".
For information about the error details, refer to "Device
Errors" (page 128).
The display will return to ready ("1") if the [Scan/Stop] or
[Send to] button is pressed.
When this alarm occurs, turn the power off then back on.If
the problem persists after turning the power back on,
contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
None The display switches off when the scanner enters power
saving mode.
Display Description
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Chapter 5 Various Ways to Scan
This chapter explains how to scan documents in various ways, by using examples of the TWAIN driver started via
ScandAll PRO.
5.1 Summary ....................................................................................................................................................67
5.2 Scanning Documents of Different Types and Sizes....................................................................................68
5.3 Advanced Scanning....................................................................................................................................82
5.4 Configuring Post-Scan Operations and Handling.......................................................................................91
5.5 Customizing the Scanner Settings ...........................................................................................................101
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
67
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
The following lists various ways of scanning documents.
Scanning documents of different types and sizes
z"Scanning Both Sides at Once" (page 68)
z"Documents with Different Widths" (page 69)
z"Documents Larger than A4/Letter Size" (page 70)
z"Scanning Photographs and Clippings" (page 73)
z"Long Page Scanning" (page 76)
z"Scanning a Book (fi-6230Z/fi-6240Z)" (page 78)
z"Scanning a Large Document on the Flatbed (fi-6230Z/fi-6240Z)"
(page 80)
Advanced scanning
z"Removing a Color from the Scanned Image (Dropout Color)" (page
82)
z"Skipping Blank Pages" (page 85)
z"Removing Punch Holes" (page 86)
z"Scanning the Image Brighter" (page 88)
z"Feeding Documents Manually in the ADF" (page 90)
Configuring post-scan operations and handling
z"Automatically Correcting Skewed Images" (page 91)
z"Automatically Correcting the Page Orientation" (page 93)
z"Splitting the Scanned Image in Two" (page 95)
z"Using the Multi Image Output" (page 97)
z"Automatically Detecting Color/Monochrome Documents" (page 99)
Customizing the scanner settings
z"Using a Button on the Scanner to Start Scanning" (page 101)
z"Detecting Multifeed Errors" (page 103)
z"Ignoring Multifeed for a Set Pattern" (page 105)
For information on how to scan documents in the following
methods, refer to "ScandAll PRO V2.0 User’s Guide".
zSaving Scanned Image in PDF File Format
zDividing a Multipage Document Using Patch Codes
zDividing a Multipage Document Using Barcodes
zSpecifying the Result of Zone OCR as a File Name
zSpecifying the Result of Barcode Recognition as a File Name
zCreating Saving Folders for Each Batch Scan
zSaving Scanned Images from a Batch Scan to Microsoft SharePoint
Server
zRestarting a Suspended Batch Scan
zOutputting Indexing Information File and Linking with an Application
5.1 Summary
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
68
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning Both Sides at Once
1Load the document in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Select [ADF (Duplex)] for [Scan Type].
4Configure other settings such as [Paper Size].
5Click the [OK] button.
DThe changes are applied.
6Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
5.2 Scanning Documents of Different Types and Sizes
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
69
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Documents with Different Widths
1To avoid skewed images and detect the paper size
automatically, select [Automatic Page Size Detection] in
[Automatic Size and Skew Detection].
For details, refer to "Automatically Correcting Skewed Images" (page
91).
2Align the top of the documents.
3Place the documents at the center of the ADF paper
chute, and adjust the side guides to the widest document
in the batch.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
4Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！！！
When you scan a mixed batch with different widths, some of
the smaller documents may be skewed or not fed into the ADF.
In that case, separate the documents by their widths, and scan
them in different batches.
For more details about scanning a mixed batch of documents,
refer to "Conditions for Mixed Batch Scanning" (page 47).
！！！
Make sure that all documents are placed underneath the
pick roller. Otherwise, some documents may be skewed
or not fed into the ADF.
Pick roller's width
Good
Pick roller's width
Bad
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
70
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Documents Larger than A4/Letter Size
The Carrier Sheet can be used to scan documents larger than
A4/Letter size, such as A3 and B4. By folding the document in
half and scanning in duplex mode, the two sides are merged
into a single image.
1Place the document inside the Carrier Sheet.
1 Fold the document in half so that the sides to be scanned are
facing out.
Fold it tightly and smooth out any creases.
Otherwise, it may cause the document to skew during feeding.
2 Place the document inside the Carrier Sheet.
Align the fold line with the right edge of the Carrier Sheet so that
the document fits in the upper right-hand corner.
2Load the Carrier Sheet face-down in the ADF paper
chute.
Secure the Carrier Sheet with the side guides to avoid skewing.
！！！
Part of the image around where the document is folded may
appear missing. Using the Carrier Sheet is not recommended
for obtaining high quality image.
You can also scan a double-sided document that is smaller
than A4 size, and output the image as a double-page spread
image.
The front side of the Carrier Sheet has a thick vertical
line on the right side of the black & white pattern.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
71
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
3Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
4Select [Double-page spread] for [Scan Type].
5Click the [Carrier Sheet] tab and configure settings such
as [Image Mode].
6Click the [OK] button.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
DThe images on the front and back are merged into a single image.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
72
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
！！！
zThere may be a line or a gap appearing between the
front and back side images.
Also when you scan thick papers, images on both left
and right may skew towards each other from the top.
These symptoms may be improved when you perform
the following:
- Fold the document tightly
- Align the edges of the document neatly with the
edges of the Carrier Sheet
- Turn over the Carrier Sheet to the other (reverse)
side
zWhen [Automatic detection] is specified for [Paper
Size], the closest standard size (A3, A4 or Double
Letter) is selected from the same drop-down list. Note
that the size of the image may become smaller than the
original document depending on the document
scanned.
Example: When you scan an A3 size document whose
content is printed to fit A4 size in the center
DThe image is output in B4 size.
To output the scanned image in the actual size of the
document, specify the document size for [Paper size].
zPart of the image around where the document is folded
may appear missing. In that case, set the document so
its edge is about 1 mm inside from the edge of the
Carrier Sheet.
zWhen [Black & White] is specified for [Image Mode],
the edges around the image may appear in black from
the shadow of the document.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
73
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning Photographs and Clippings
Using the Carrier Sheet allows you to scan documents that
can be damaged quite easily such as photographs, or
documents that are difficult to load directly such as newspaper
clippings.
1Place the document inside the Carrier Sheet.
Place it against the top center of the Carrier Sheet.
2Load the Carrier Sheet face-down in the ADF paper
chute, as shown below.
Secure the Carrier Sheet with the side guides to avoid skewing.
3Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
74
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Select [Clipping (Front)] or [Clipping (Duplex)] for [Scan
Type].
Select [Clipping (Front)] for simplex scanning and [Clipping (Duplex)]
for duplex scanning.
5Click the [Carrier Sheet] tab and configure settings such
as [Image Mode].
6Click the [OK] button.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！
！
！zThe image is output at the center of the page in the
size specified in [Paper Size].
zWhen [Automatic detection] is specified for [Paper
Size], the closest standard size is selected from the
same drop-down list. Note that the size of the image
may become smaller than the original document
depending on the document scanned, or part of the
image may appear missing.
Example: When an A5 size image is printed in the
center of an A4 size document
DThe image is output in A5 size.
To output the scanned image in the actual size of the
document, specify the document size for [Paper size].
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
75
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
In the following cases, place a blank (white) sheet of
paper underneath the document when scanning.
zThe scanned image is not output in the correct size
when [Automatic detection] is selected in the [Paper
size] drop-down list
zShadows appear around the edges of the scanned
image
zBlack lines appear around the edges of a uniquely
shaped cutting
zColors outside the document appear on the scanned
image
Blank
sheet
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
76
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Long Page Scanning
Documents with a length up to 3,048 mm (120 in.) can be
scanned by long page scanning.
1Load the document in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
！！！
zLong page documents should be loaded one sheet at a
time in the ADF paper chute.
zWhen you scan long pages, take note of the following.
- Loading
Hold the document with your hand so it does not fall
out of the ADF paper chute.
- Removing
Secure enough space around the stacker to prevent
the ejected sheet from falling off the stacker.
To scan documents longer than A4/Letter size, perform
the following:
zPull out the chute extensions all the way.
For details, refer to "1.6 Setting Up the ADF Paper
Chute" (page 26).
zLift the stacker and stacker extension towards you.
For details, refer to "1.7 Setting Up the Stacker" (page
27).
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
77
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
3In [Scan Type], select [Long page (Front Side)] or [Long
page (Duplex)].
Select [Long page (Front Side)] for simplex scanning and [Long page
(Duplex)] for duplex scanning.
DThe [Long Page Paper Size Setting] dialog box appears.
4Specify the paper size and click the [OK] button.
5Click the [OK] button.
DThe changes are applied.
6Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！！！
zTo scan documents longer than 864 mm (34 in.), set
the resolution to 200 dpi or lower.
zDepending on the application or scan settings (e.g.
paper size), there may be insufficient memory to
perform scanning.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
78
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning a Book (fi-6230Z/fi-6240Z)
1Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2Remove the document cover by pulling it out in the
direction of the arrow.
3Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Reference point
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
79
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
5Select [Flat Bed] for [Scan Type].
6Click the [OK] button.
DThe changes are applied.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
8Attach the document cover.
9Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
Do not look directly into the light source.
！！！
Do not move the document during scanning.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
80
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning a Large Document on the Flatbed
(fi-6230Z/fi-6240Z)
1Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2Remove the document cover by pulling it out in the
direction of the arrow.
3Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Reference point
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
81
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
5Select [Flat Bed] for [Scan Type].
6Click the [OK] button.
DThe changes are applied.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
8Attach the document cover.
9Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
Do not look directly into the light source.
！！！
Do not move the document during scanning.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
82
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Removing a Color from the Scanned Image
(Dropout Color)
You can select either green, red, blue (primary colors), or a
color of your choice to remove the details of the selected color
from a scanned image.
For example, if a document with black characters and a green
background is scanned, only the black characters will appear
on the scanned image if [Green] is selected.
1Load the document.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Advance] button.
DThe [Advance] dialog box appears.
5.3 Advanced Scanning
！
！
！Dropout works the best with light (low intensity) colors, and
dark colors may not drop out.
Dropout color is only available in black & white or grayscale
mode.
ABC ABC
Example: When [Green] is selected for dropout color
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
83
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Click the [Gray] tab, and then select a color from [Dropout
Color] under [More].
If you select [Panel setting], the setting of the Software Operational
Panel is enabled.
No color is dropped out when you select [None].
To drop out a color of your choice, select either [Custom], [Custom 2]
or [Custom 3].
When you select [Custom], [Custom 2], or [Custom 3], the [Select
Dropout Color] dialog box is displayed where you can select up to
three colors of your choice.
z[Original image]
A sample of the color is displayed.Click to select the color.
z[Dropout image]
The image after removing the details of the color is displayed.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
84
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
z[Color 1], [Color 2] and [Color 3] tabs
Specify the color(s) to be dropped out.
Up to three colors can be selected at once.
- [Dropout] check box
Select this check box in the [Color 2] or [Color 3] tab when two or
more dropout colors are specified.
- [Red] / [Green] / [Blue]
The specified colors are displayed in numerical values. Either
type in the value directly or use the [▲] / [▼] button to change
the value.
- [Sample color]
The specified color is displayed.
z[Priority Black] check box
Select this check box when you do not want any text/characters to
be dropped out.
This option saves low intensity colors such as black (generally
used for characters) from being removed.
z[Sensitivity]
Specify the allowable range for the selected dropout color.
Range: 15 to 180 degrees
The larger the value is set, the wider the color range becomes.
z[File] Button
You can select an image file (*.bmp) to be displayed for [Original
image], and then specify the color to be dropped out.
z[Apply] Button
Applies the configured settings and closes the dialog box.
z[Cancel] Button
Cancels the configured settings and closes the dialog box.
5Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
85
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Skipping Blank Pages
Blank pages (black or white) in the documents can be
detected and automatically deleted during scanning. For
example, when you scan a mixed batch of double-sided and
single-sided documents in duplex mode, the images are
generated without the back sides of the single-sided
documents (blank pages).
1Load the documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
4Click the [Job/Cache] tab and select the [Blank Page
Skip] check box.
DThe cache mode automatically switches to [Ram cache] or
[Use Both Memory].
5Use the slider to adjust the sensitivity.
Select from five levels. The larger the value is set, the more likely for
the pages to be detected as blank.
Blank pages will not be deleted if you select [--].
6Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
7Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
8Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
86
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Removing Punch Holes
You can remove punch holes from the output scanned image.
1Load the documents.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
4Click the [Rotation] tab and select [Automatic Page Size
Detection] or [Black Background] in the [Automatic Size
and Skew detection] drop-down list.
The [Hole punch removal] function is disabled when a setting other
than [Automatic Page Size Detection] or [Black Background] is
specified.
5Select [Fill with white] or [Background color] under [Hole
punch removal].
Select [Background color] when scanning a color document. If [Fill
with white] is selected, the punch holes will appear as if they are filled
with white squares.
！
！
！Punch holes cannot be removed when:
zThe holes are not aligned along the edge of the document
zThe size and gap between the holes vary
zThe hole is near the edge of the document
zThe document is not rectangular
zThe document has a dark background color
zThere are characters/pictures over the edge or the holes
z[Automatic Page Size Detection] is specified and the
scanned document is larger than the selected paper size
z[Black Background] is specified and the scanned document
does not match with the selected paper size.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Original Output image
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
87
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
6Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
7Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
8Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
With some types of documents, the characters or
graphics may be falsely detected as punch holes and
filled with a color, or the punch holes may not be filled at
all. In such cases, select [Automatic Page Size Detection]
and specify "3" for [Priority] to improve the accuracy of
hole punch removal.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
88
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning the Image Brighter
The brightness of the scanned image can be increased for
scanning in grayscale or color.
1Load the document.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Select grayscale or color in [Image Mode].
4Click the [Advance] button.
DThe [Advance] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
89
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
5Click the [Color] tab, and then select [Bright] in [Preset
Gamma].
6Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
7In the [TWAIN Driver (32)] dialog box, click the [OK]
button.
DThe settings are saved.
8Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
When using applications other than ScandAll PRO, you can
also increase the default brightness of the TWAIN driver.
Select [Tools] J [FtSwtGmm] J [Twain] in the Setup DVD-
ROM and double-click "FtSwtGmm.exe", and then select
[Bright) in the [Default scan setting (TWAIN)] dialog box.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
90
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Feeding Documents Manually in the ADF
Documents can also be loaded manually one sheet at a time
in the ADF.
Normally, in automatic feeding, the scanner stops scanning
once all the documents loaded in the ADF paper chute have
been scanned.
In manual feeding, the scanner waits for the next document to
be loaded within a specified time. Scanning will continue as
long as another document is loaded within the set time, and
stops if no document is loaded.
By using this method, you can perform scanning as you check
the documents one by one.
Manual feeding is effective in the following cases.
zTo scan as you check the contents of each sheet.
zTo scan documents that cause multifeed or paper jam when loaded
together in the same batch.
zTo continue scanning documents such as magazine/newspaper
clippings that cannot be loaded together.
1Enable manual feeding in the Software Operation Panel.
For details, refer to "Waiting Time in Manual Feed Mode [Manual-feed
timeout]" (page 186).
2Load a document in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
3Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
DAfter the document is scanned, the rollers inside the ADF keep
rotating, waiting for the next document to be loaded for the time
specified in the Software Operation Panel.
4Load the next document in the ADF paper chute.
DThe document is scanned.
5Repeat step 4 until all documents are scanned.
DScanning will stop if no document is loaded within the set time.
zPressing the [Send to] button on the operator panel will
stop the scan immediately.
zWhen [Manual-feed timeout] is enabled, the scanner
will wait for the set time even if you start scanning with
no document in the ADF paper chute.
zWhen you use manual feeding frequently, replacement
cycle of the consumables may be shortened.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
91
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Automatically Correcting Skewed Images
When the documents are fed into the ADF skewed, the
skewed images can be detected and straightened
automatically.
Note that upon deskewing the images, the paper size of the
documents are also detected automatically.
1Load the documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
5.4 Configuring Post-Scan Operations and Handling
！！！
Note that the image may be output a few mm larger than the
document to avoid any part of the image to appear missing.
For details about automatic page size detection, refer to "
Conditions for Automatic Page Size Detection" (page 49).
Original Output image
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
92
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Click the [Rotation] tab and select [Automatic Page Size
Detection] in the [Automatic Size and Skew detection]
drop-down list.
5Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！
！
！[Automatic Page Size Detection] may not work properly if
the documents are severely skewed.
Selecting [Automatic Page Size Detection] may slow
down the scanning speed.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
93
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Automatically Correcting the Page Orientation
When you scan a batch of documents with mixed page
orientations, the images can be adjusted to their correct page
orientations automatically.
1Load the documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
4Click the [Rotation] tab and select [Automatic] in the
[Rotation Degree] drop-down list.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Opqrstu
Vwxyz.
DEF
Opqrstu
Vwxyz.
DEF
Abcdefg
Hijklmn
Abcdefg
Hijklmn
Original Output image
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
94
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
5Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！！！
zThe following types of documents may not be adjusted
correctly because the page orientation is detected
based on the characters printed on the document:
- Documents scanned at a resolution of less than 200
dpi
- Documents with many extremely large or small
characters
- Documents on which the pitches between lines or
characters are extremely narrow, or characters are
overlapped with each other
- Documents with many photographs or figures and
few characters
- Documents with characters printed in various
directions (e.g. drawings)
- Documents written using only capital characters
- Documents with handwritten characters
- Skewed documents
- Documents written in a language other than the
supported languages: Japanese, English, French,
German, Italian, Spanish, Chinese (Simplified and
Traditional), Korean, Russian and Portuguese.
- Documents with characters on patterned
background
- Documents with a complex layout
- Documents with a large amount of image noise
zThe language selected in the Windows [Regional and
Language Options] is used for judging the text on the
document.
zThe image orientation may not be corrected properly
depending on the scanner driver setting at scanning
(e.g. dithering).
zIf you cannot correct the image orientation properly,
use the Edge Emphasis function of the driver to correct
it.
zShadows may remain on the edge of the scanned
image.
z[Automatic] in [Rotation Degree] is available only when
ScandAll PRO is installed.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
95
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Splitting the Scanned Image in Two
Each page of the scanned image can be split horizontally into
two separate pages.
1Load the document.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
！！！
This function may not work properly in some applications.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
ABC
123
ABC
123
Original Output image
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
96
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Click the [Rotation] tab and select the [Split Image] check
box.
5Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
！
！
！This option is not available with the following settings:
zMulti image output
zAuto color/monochrome detection
zResolution set to 1200 dpi
z[Double-page spread], [Clipping (Front)] or [Clipping
(Duplex)]
When scanning in duplex mode, the back of the image is
output in the following order according to the [Flip Side
Rotation] setting:
zBook: top J bottom
zFanfold: bottom J top
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
97
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Using the Multi Image Output
"Multi image output" allows you to obtain both a color/
grayscale image and a black & white image from a single
scan.
1Load the document.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Select the [Enable Multi Image] check box.
DThe [Multi Image] dialog box appears.
！
！
！This function may not work properly in some applications.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
ABC ABC
Original Output image
Example: When a color document is scanned
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
98
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Select [Multi Image Output] for [Output mode].
5In [Order (for Multi Image Output)], select the order in
which the images are output.
6Select a side in [Select Current Image Setting].
Configure the scan settings for [Primary] and then [Secondary] in the
[TWAIN Driver (32)] dialog box.
7Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
8Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
Order Description
Primary : Color/Grayscale
Secondary : Binary
A color/grayscale image is output
first, then a black & white image.
Primary : Binary
Secondary : Color/Grayscale
A black & white image is output
first, then a color/grayscale image.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
99
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Automatically Detecting Color/Monochrome
Documents
The color of the document can be automatically detected then
output in color or grayscale for color documents, and in black
& white for black & white documents.
1Load the documents.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Select the [Enable Multi Image] check box.
DThe [Multi Image] dialog box appears.
！！！
This function may not work properly in some applications.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
100
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Select [Auto Color Detection] for [Output mode].
5Select a side in [Select Current Image Setting].
You need to pre-configure the scan settings for each case when the
document is recognized as [Color/Grayscale] or [Binary].
Configure the scan settings in the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
If it is recognized as a color/grayscale document, the
image is output in the mode selected for [Image Mode] in
the [TWAIN Driver (32)] dialog box.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
101
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Using a Button on the Scanner to Start Scanning
The [Scan/Stop] and [Send to] buttons on the operator panel
can be configured to perform scanning by simply pressing one
of these buttons.
To configure this setting, you first need to assign an
application to be launched from each button.
Computer setup
1Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details, refer to “Connecting the Cables” in Getting Started.
2Select the [Start] menu J [Control Panel].
DThe [Control Panel] dialog box appears.
3Click [View devices and printers].
DThe [Devices and Printers] dialog box appears.
4Right-click on the scanner icon, and select [Scan
properties] from the displayed menu.
DThe properties dialog box of the scanner appears.
5Click the [Events] tab and select an event.
From the [Select an event] drop-down list, select an event from which
you want to launch an application.
In this function, the following events can be specified:
z[Scan Button] (press the [Scan/Stop] button)
z[Send to 1] to [Send to 9] (press the [Send to] button while a
number from 1 to 9 is displayed on the Function Number
Display)
5.5 Customizing the Scanner Settings
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
102
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
6Select an action and an application to be launched by the
scanner button event.
Click [Start this program] under [Actions], and select an application
from the drop-down list on the right.
7Click the [OK] button.
If you are using ScandAll PRO, refer to "ScandAll PRO V2.0 User’s
Guide".
If you are using an application other than ScandAll PRO, the setup of
the computer is completed here. Proceed to configure the scanner
settings.
Scanner setup
z[Scan/Stop] button
No particular setting is required.
DThe specified application is launched when you press the [Scan/
Stop] button.
z[Send to] button
Press the [Function] button to change the number displayed on the
Function Number Display.
Make this number match with the scanner button event configured in
the computer ([Send to 1] to [Send to 9]).
For example, select "2" on the Function Number Display to perform
the action configured for [Send to 2].
DThe specified application is launched when you press the [Send
to] button.
zThe windows that appear and the operations differ by
the operating system that you are using.
zTo configure multiple buttons, repeat steps 4 to 7.
zFor details about the operator panel, refer to "Chapter 4 How
to Use the Operator Panel" (page 63).
zThe number on the Function Number Display will change in
the following order: 1, 2, 3, ... 9, C, 1, 2, 3...
Numbers 1 to 9 correspond to the scanner button events
from "Send to 1" to "Send to 9" configured in the computer.
"C" corresponds to the Software Operation Panel (fixed
setting).
Check
Function
Send to
Scan
/Stop
Power
[Send to] button
[Scan/Stop] button
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
103
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Detecting Multifeed Errors
Multifeed is an error where two or more sheets are fed through
the ADF at once. It is also called a multifeed when a different
document length is detected.
You can have an error message appear when a multifeed
occurs.
Settings for multifeed detection can be configured in the
scanner driver or the Software Operation Panel.
For details about this setting in the Software Operation Panel,
refer to "Specifying a Multifeed Detection Method [Multifeed]"
(page 180).
1Load the documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 37).
2Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
3Click the [Option] button.
DThe [Option] dialog box appears.
4Click the [Job/Cache] tab and specify the detection
method in the [Multifeed Detection] drop-down list under
[ADF Option].
The following are the conditions of detecting multifeeds.
For more details about multifeed detection, refer to "Conditions for
Multifeed Detection" (page 45).
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Condition Description
None Does not detect multifeed.
Hardware
Setting
Enables the setting of the Software Operation
Panel.
Check
Overlapping
(Ultrasonic)
Uses the ultrasonic sensors inside the ADF to
monitor the documents during feeding and to
identify multifeeds according to the deviation of
the reflected ultrasonic waves.
Check length Monitors the document length during feeding, and
identifies multifeeds according to the deviation of
detected lengths.
Note that multifeeds cannot be detected
accurately when scanning a mixed batch of
different sizes.
Check
Overlapping
and length
Monitors both document overlapping and length
to detect multifeeds.
Note that multifeeds cannot be detected
accurately when scanning a mixed batch of
different sizes.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
104
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
5Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
7Scan the document by selecting the [Scan] menu J
[Scan] in ScandAll PRO.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
105
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Ignoring Multifeed for a Set Pattern
If you attempt to scan a document with a sticky note, receipt,
or photo attached while multifeed detection is enabled, the
scanner may falsely recognize this as a multifeed error and
stop the scan. To scan these types of documents, the
"Intelligent Multifeed Function" is available.
There are two modes in this function. In one mode, you can
suppress multifeeds forcibly by using the operator panel on
the scanner. In the other mode, you can suppress multifeeds
automatically by letting the scanner memorize the location and
the length of the attachment.
Intelligent Multifeed function
The following three modes are available:
The mode can be selected in the Software Operation Panel.
For details, refer to "Specifying an Area Not to Detect Multifeed
[Intelligent Multifeed Function]" (page 185).
Sticky note
Receipt
or photograph
Document
Mode Description
Manual mode
(Bypass by front
panel button)
Checks for any paper attached every time a
multifeed occurs, and continues scanning.
Auto mode 1
(Bypass by
combination of
length and position)
Used to scan documents with paper of the same
size attached in the same location.
Auto mode 2
(Bypass by length)
Used to scan documents with paper of different
sizes attached in different locations.
！
！
！Irregular images may be output when multifeeds occur.
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
106
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Preparation before using this function
1Start up ScandAll PRO, and select the [Scan] menu J
[Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
2Click the [Option] button.
DThe [Option] dialog box appears.
3Select the [Job/Cache] tab, and select [Check
Overlapping (Ultrasonic)] or [Check Overlapping and
length] for [Multifeed Detection] under [ADF Option].
4Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
5Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
DThe settings are saved.
Operational procedure
1After a multifeed error occurs, either press the [Send to]
button to eject the document from the paper path or open
the ADF to remove the document.
2Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
When you close the ADF, indication on the Function Number Display
changes as follows.
zAlternates between "J" and "2" when a multifeed is detected.
zThe function number flashes when ejecting the documents.
3Load the documents back in the ADF paper chute.
If a multifeed by difference in length is detected, either press the
[Scan/Stop] button or perform a scan from the computer (do not press
the [Function] button). If there is an attachment which is likely to be
the cause of the multifeed error, then proceed to the next step.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
！
！
！Confirm that the ADF is closed properly. Otherwise, the
document may not be fed into the ADF.
Check
Function
Send to
Scan
/Stop
Power
[Scan/Stop] button
[Function] button
Function Number Display
[Send to] button
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
107
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4Press the [Function] button and confirm that the function
number is flashing faster, and then either press the [Scan/
Stop] button or perform a scan from the computer.
From this point, note that the flashing speed of the Function Number
Display switches between "slow" Q "fast" every time you press the
[Function] button. When the flashing speed is fast, the scanner
operates in each mode as follows:
zManual mode (Bypass by front panel button)
Scans the next sheet without multifeed detection, and from the
second sheet, multifeeds are detected based on the setting
configured in the scanner driver or the Software Operation Panel.
zAuto mode 1 (Bypass by combination of length and position)
Memorizes the length and location of the paper attachment that
was detected as multifeed, and continues scanning. When a paper
attachment of a similar pattern is detected, multifeed detection is
automatically suppressed. (*1)(*2)
zAuto mode 2 (Bypass by length)
Memorizes the length of the longest paper attachment that was
detected as multifeed, and continues scanning. When a paper
attachment of the same length or shorter is detected, multifeed
detection is automatically suppressed. (*1)(*2)
*1: 32 pages (up to 4 attachments per page) worth of overlap
patterns can be memorized in this mode. When it exceeds this
limit, the first pattern that was memorized is erased from the
memory.
*2: To erase the memorized overlap patterns and the longest
overlap length, hold down the [Function] button for more than 5
seconds while the function number is flashing. The Function
Number Display will then display "□". This allows you to erase
multifeed patterns and the longest overlap length that were not
supposed to be memorized. Be careful with this operation
because all memorized patterns will be erased.
！！！
Do not hold down the [Function] button for more than 5
seconds when switching the flashing speed, because it
may erase the memorized multifeed patterns.
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Daily Care
Chapter 6 Daily Care
This chapter describes how to clean the scanner.
6.1 Cleaning Materials and Locations that Require Cleaning.........................................................................109
6.2 Cleaning the Outside................................................................................................................................ 110
6.3 Cleaning the Inside................................................................................................................................... 111
6.4 Cleaning the Carrier Sheet ....................................................................................................................... 116
Do not use aerosol spray or spray that contains alcohol to clean
the scanner. Dust blown up by strong air from the spray may
enter inside the scanner which may cause the scanner to fail or
malfunction.
Also note that sparks generated by static electricity may cause a
fire.
The glasses inside the ADF become very hot when the scanner
is being used.
Before you start cleaning the inside, make sure to turn off the
power, unplug the power cable and wait at least 15 minutes for
the ADF glass to cool down.
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
109
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning Materials
For more information about the cleaning materials, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Location and Frequency
6.1 Cleaning Materials and Locations that Require Cleaning
Name Part No. Notes
Cleaner F1 PA03950-
0352
100 ml
Moisten a cloth or Cleaning
Paper with this liquid to wipe the
scanner clean.
It may take a long time to dry if
an excessive amount is used.
Use it in small quantity. Wipe off
the cleaner completely to leave
no residue on the cleaned parts.
Cleaning Paper CA99501-
0012
10 sheets
Use this non-woven sheet with
Cleaner F1.
Cleaning Wipe PA03950-
0419
24 packets
Pre-moistened with Cleaner F1.
It can be used instead of
moistening a cloth with Cleaner
F1.
Cotton swab Commercially available
Dry cloth
！！！
In order to use the cleaning materials safely and correctly, read
the precautions on each product thoroughly.
Location Frequency
ADF Brake roller Every 5,000 sheets
Pick roller
Idler roller
Glass
Ultrasonic sensor
Feed roller
Eject roller
Flatbed
(fi-6230Z/
fi-6240Z)
Document pad
Document bed
Plastic frame
！！！
Cleaning cycles may vary depending on the condition of the
documents. Also, cleaning must be performed more frequently
when the following types of documents are scanned:
zSmooth-faced documents such as coated paper
zDocuments with printed text/graphics that almost cover the
entire surface
zChemically-treated documents such as carbonless paper
zDocuments containing a large amount of calcium carbonate
zDocuments written in lead pencil
zDocuments on which the toner is not sufficiently fused
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
110
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
The outside of the scanner, including the ADF paper chute
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
fi-6130Z/fi-6140Z
fi-6230Z/fi-6240Z
6.2 Cleaning the Outside
！！！
zNever use paint thinner or any other organic solvents
because it may result in deformation or discoloration.
zBe careful not to let any moisture or water inside the
scanner during cleaning.
zIt may take a long time to dry if an excessive amount of
Cleaner F1/mild detergent is used. Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the
cleaned parts.
Thinner
Cleaner F1
or mild detergent
Cloth
Cleaning Wipe
Thinner
Cleaner F1
or mild detergent
Cloth
Cleaning Wipe
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
111
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning the ADF (with Cleaning Paper)
The ADF can be cleaned with a sheet of Cleaning Paper
moistened with Cleaner F1.
As the scanner continues to feed the documents, paper dust
will accumulate inside the ADF and it may cause scanning
errors.
Cleaning should be performed approximately every 5,000
sheets scanned. Note that this guideline varies depending on
the types of documents you scan. For instance, it may be
necessary to clean the scanner more frequently when you
scan documents on which the toner is not sufficiently fused.
1Turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
2Spray the Cleaning Paper with Cleaner F1.
3Pull out the chute extensions according to the length of
the Cleaning Paper.
For details, refer to "1.6 Setting Up the ADF Paper Chute" (page 26).
4Lift the stacker and stacker extension according to the
length of the Cleaning Paper.
For details, refer to "1.7 Setting Up the Stacker" (page 27).
5Load the Cleaning Paper in the ADF paper chute.
6Adjust the side guides to the width of the Cleaning Paper.
Do not leave space between the side guides and the Cleaning Paper.
Otherwise, the Cleaning Paper may be fed skewed.
7Start up an application for scanning and perform a scan.
For details about the scanning procedure in ScandAll PRO, refer to
"ScandAll PRO V2.0 User’s Guide".
6.3 Cleaning the Inside
！！！
zDo not use water or mild detergent to clean the ADF.
zIt may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity.
Side guide
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
112
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning the ADF (with cloth)
The ADF can be cleaned with a piece of cloth moistened with
Cleaner F1, or a sheet of Cleaning Wipe.
As the scanner continues to feed the documents, paper dust
will accumulate inside the ADF and it may cause scanning
errors.
Cleaning should be performed approximately every 5,000
sheets scanned. Note that this guideline varies depending on
the types of documents you scan. For instance, it may be
necessary to clean the scanner more frequently when you
scan documents on which the toner is not sufficiently fused.
1Turn off the scanner and wait for at least 15 minutes.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
2Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
3Clean the following locations with a cloth moistened with
Cleaner F1 or a sheet of Cleaning Wipe.
The glasses inside the ADF become very hot
when the scanner is being used.
Before you start cleaning the inside, make sure
to turn off the power, unplug the power cable and
wait at least 15 minutes for the ADF glass to cool
down.
！！！
zDo not use water or mild detergent to clean the ADF.
zIt may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity. Wipe off the
cleaner completely to leave no residue on the cleaned
parts.
Be careful not to have your fingers caught
when the ADF closes.
！！！
Make sure that the cloth does not get caught and damage
the document sensors.
Glass (×2)
Pick roller (×2)
Ultrasonic sensor (×2)
Idler roller (×4)
Feed roller (×2)
Eject roller (×2)
Brake roller (×2)
Document
sensor
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
113
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Brake roller (×2)
Remove the roller from the scanner.
For details about removing the brake roller, refer to "7.2 Replacing the
Brake Roller" (page 119).
Gently wipe along the grooves, taking care not to damage the roller
surface.
Pick roller (×2)
Gently wipe along the grooves as you rotate the roller manually, taking
care not to damage the roller surface. Make sure that it is cleaned
properly because residue on the roller will affect the feeding
performance.
Idler roller (×4)
Gently wipe the surface of the rollers. Make sure that it is cleaned
properly because residue on the roller will affect the feeding
performance. Also be careful not to damage the sponge which is
attached on each roller.
Glass (×2)
Gently wipe the dirt and dust off the surface of the glass sections.
Ultrasonic sensor (×2)
Gently wipe the dirt and dust off the surface of the ultrasonic sensors.
Feed roller (×2) / Eject roller (×2)
The power must be turned on to rotate the feed/eject rollers.
1 Turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
2 Open the ADF when "1" is displayed on the Function Number
Display.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
！！！
Vertical streaks may appear on the scanned image when the
glass is dirty.
If it is difficult to clean, use a cotton swab.
Ultrasonic sensor
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
114
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
3 When you press the [Send to] and [Scan/Stop] buttons at the
same time, the feed/eject rollers rotate a certain amount.
4 Put a piece of cloth moistened with Cleaner F1 or a sheet of
Cleaning Wipe against the roller surface, and wipe horizontally.
Wipe the whole surface by pressing the [Send to] and [Scan/Stop]
buttons at the same time to rotate the rollers.
Make sure that it is cleaned properly because residue on the roller
will affect the feeding performance.
As a guideline, pressing the [Send to] and [Scan/Stop] buttons
seven times will rotate the feed/eject rollers one revolution.
4Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
Be careful not to touch the rollers with
your hand while they are rotating.
！！！
Confirm that the ADF is closed properly. Otherwise, the
document may not be fed into the ADF.
Check
Function
Send to
Scan
/Stop
Power
[Send to] button
[Scan/Stop] button
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
115
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning the Flatbed (fi-6230Z/fi-6240Z)
The flatbed should be cleaned with a piece of cloth moistened
with Cleaner F1, or a sheet of Cleaning Wipe.
1Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2Clean the following locations with a cloth moistened with
Cleaner F1 or a sheet of Cleaning Wipe.
3Wait for the cleaned parts to dry.
4Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
！！！
Be careful not to let the cleaner in between the document
bed and the plastic frame.
Plastic frame
Document
bed
Document pad
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
116
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
The Carrier Sheet should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1, or a sheet of
Cleaning Wipe.
Gently wipe the dirt and dust off the surface and the inside of
the Carrier Sheet.
As you keep using the Carrier Sheet, dirt and dust will
accumulate on the surface and the inside.
Clean it regularly because it may result in scanning errors.
6.4 Cleaning the Carrier Sheet
！！！
zTo avoid deformation and discoloration, never use paint
thinner or any other organic solvents.
zDo not use force to rub against the Carrier Sheet because it
may be damaged or deformed.
zAfter cleaning the inside, do not close the Carrier Sheet
until it is completely dry.
zThe Carrier Sheet should be replaced approximately every
500 scans.
For information on purchasing the Carrier Sheet, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
Chapter 7 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
7.1 Consumables and Replacement Cycles................................................................................................... 118
7.2 Replacing the Brake Roller....................................................................................................................... 119
7.3 Replacing the Pick Roller .........................................................................................................................121
zThe glasses inside the ADF become very hot
when the scanner is being used.
zBefore you replace the consumables, make sure
to turn off the power, unplug the power cable
and wait at least 15 minutes for the ADF glass to
cool down.
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
118
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
The following table shows the consumables used for the
scanner.
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables and
replace them before it reaches the end of the consumable life.
The scanner records the page count (number of sheets
scanned) after replacing the consumables, which allows you
to check the status on each consumable (See "9.4 Settings
Related to Page Counters" (page 166)).
Note that the suggested replacement cycles are guidelines for
using A4 (80 g/m² [20 lb]) wood-free or wood-containing
paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and
cleaned.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
7.1 Consumables and Replacement Cycles
Name Part No. Suggested replacement
cycle
BRAKE ROLLER PA03540
-0001
200,000 sheets or one year
PICK ROLLER PA03540
-0002
200,000 sheets or one year
Only use the specified consumables.
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
119
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
Replace the brake roller in following procedure.
1Remove all documents from the ADF paper chute.
2Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
3Remove the brake roller.
1 Hold both ends of the cover, and open it in the direction of the
arrow.
2 Lift the right side of the roller first, then pull out the shaft from the
slot on the left.
4Remove the brake roller from its shaft.
5Attach a new brake roller on the shaft.
Insert the protrusion on the shaft into the slot.
7.2 Replacing the Brake Roller
Be careful not to have your fingers caught
when the ADF closes.
Cover
1
Shaft
Brake roller
2
Shaft
Brake roller
Slot
Protrusion
Shaft
Brake roller
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
120
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
6Attach the shaft.
1 Insert the shaft from the slot on the left side.
2 Close the cover.
7Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
8Reset the consumable counter.
Start up the Software Operation Panel and reset the counter.
For details, refer to "Resetting the counters" (page 167).
！！！
Confirm that the brake roller is installed properly.
Otherwise, it may cause feeding errors such as paper
jams.
Be careful not to have your fingers caught
when the ADF closes.
Shaft
Brake roller
12
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
121
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
Replace the pick roller in following procedure.
1Remove all documents from the ADF paper chute.
2Remove the ADF paper chute.
Hold both ends of the ADF paper chute, and lift 1 then pull it out
2 in the direction of the arrow.
3Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
4Remove the pick roller.
1 Open the sheet guide by lifting the tab.
2 Rotate the bushing on the shaft.
7.3 Replacing the Pick Roller
Be careful not to have your fingers caught
when the ADF closes.
ADF paper chute
1
2
Tab
Sheet guide
Bushing
Shaft
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
122
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
3 Lift the bushing first, then pull out the shaft.
5Remove the pick roller from its shaft.
Pull out the shaft as you lift the retaining clip.
6Attach a new pick roller on the shaft.
Insert the protrusion on the shaft into the slot.
！！！
Be careful not to touch the gear near the bushing on the
shaft as it contains grease.
Bushing
Shaft
Shaft
Retaining clip
Pick roller
！！！
Lifting the retaining clip with your fingernail may hurt or
damage your fingernail.
Use a paper clip or something alike if you have trouble
lifting it up.
！！！
Confirm that the pick roller is installed properly.
Otherwise, it may cause feeding errors such as paper
jams.
Make sure to insert the pick roller until it locks in place.
1
2
Shaft
Pick roller
Protrusion
Slot
Chapter 7 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
123
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
7Attach the shaft.
1 Insert the right end of the shaft into the slot, and lower the other
end gradually.
2 Rotate the bushing to lock the shaft.
3 Close the sheet guide. Make sure that both ends of the sheet
guide are locked firmly.
8Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
9Attach the ADF paper chute.
Insert the tabs into the slots on the back of the scanner, and tilt the
ADF paper chute backwards until it locks in place.
10 Reset the consumable counter.
Start up the Software Operation Panel and reset the counter.
For details, refer to "Resetting the counters" (page 167).
！！！
Confirm that the pick roller is installed properly.
Otherwise, it may cause feeding errors such as paper
jams.
Shaft
Bushing
Shaft
Be careful not to have your fingers caught
when the ADF closes.
ADF paper chute
Tab
Side guide
1
2
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Chapter 8 Troubleshooting
This chapter explains about the countermeasures against paper jams and other troubles, items to check before contacting
your scanner service provider, and how to read the product labels on the scanner.
8.1 Paper Jam ................................................................................................................................................125
8.2 Error Indications on Operator Panel.........................................................................................................126
8.3 Troubleshooting........................................................................................................................................130
8.4 Before You Contact the Scanner Service Provider...................................................................................149
8.5 Checking the Product Labels....................................................................................................................151
！
！
！For details about errors/troubles not mentioned in this chapter,
refer to the TWAIN driver Help, ISIS driver Help or Error
Recovery Guide.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
125
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
When your document is jammed inside the scanner, remove
the document in the following procedure.
1Remove all documents from the ADF paper chute.
2Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
3Remove the jammed document.
4Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
8.1 Paper Jam
zDo not use force to pull out the jammed
document, and make sure to open the ADF
first.
zBe careful not to touch any sharp parts upon
removing jammed documents.
zBe careful not to get your accessories (e.g.
ties, necklaces) or hair caught inside the
scanner.
zThe glass surface may become extremely hot
during operation.
Be careful not to have your fingers caught
when the ADF closes.
！！！
zMake sure to check the documents and the paper
path thoroughly and remove all staples and paper
clips as they cause paper jams.
zBe careful not to damage the glass surface and the
guides when removing documents with staples or
paper clips.
！
！
！zConfirm that the ADF is closed properly. Otherwise,
the document may not be fed into the ADF.
zOccasionally when scanning is complete or canceled,
documents may remain in the ADF without any error
message displayed. In that case, remove the
documents by following the above steps 1 to 4.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
126
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
When an error occurs, the LED indicator lights in orange. The
Function Number Display alternates between either "J" or "U"
and an "error number" for temporary errors, and either "E",
"F", "C", "H", "A" or "U" and an "alarm number" for device
errors. Temporary errors can be recovered by the operator,
whereas device errors require a service engineer to perform
recovery. The indication will return to "1" (ready) if the [Scan/
Stop] or [Send to] button is pressed. Note that in case of a
paper jam, the indication will be cleared automatically after a
certain amount of time if no document is loaded.
If the Error Recovery Guide is installed in your computer, the
Error Recovery Guide window appears when the Windows
operating system is started up. When an error or a malfunction
occurs, the Error Recovery Guide window displays related
information such as the name of the error and the error code
(number).
Write down the information shown in the dialog box and click
the [More Info] button to check for troubleshooting methods.
8.2 Error Indications on Operator Panel
Check
Function
Send to
Scan
/Stop
Power
[Send to] button
[Scan/Stop] button
Function Number Display
LED indicator
The Error Recovery Guide is included in the Setup DVD-ROM.
For details about installation, refer to "Installing the Software"
in Getting Started.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
127
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Temporary Errors
The following are lists of temporary errors which can be
recovered by operators.
■Paper feeding errors
"J" and "error number" are displayed back and forth.
■Cover open and print errors
"U" and "error number" are displayed back and forth.
Display Item Resolution
J0 Paper jam
(paper protection)
1 Remove the jammed document.
For details, refer to "8.1 Paper Jam"
(page 125).
2 Check if the document is suitable for
scanning by ADF.
For details, refer to "2.3 Documents
for Scanning (ADF)" (page 41).
J1 Paper jam
J2 Multifeed When you press the [Send to] button
on the operator panel, the documents
are ejected.
Display Item Resolution
U0 Transport lock
error
(fi-6230Z/fi-6240Z)
Unlock the transport lock switch.
For details, refer to "Installing the
Scanner" in Getting Started.
U4 Cover open (ADF) Close the ADF and reload the
documents.
U5 Cover open
(Imprinter)
Close the print section of the imprinter,
and load the document again.
U6 Print cartridge not
installed
This error is related to the imprinter
(option).
For more details, refer to the fi-614PR
Imprinter Operator's Guide.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
128
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Device Errors
The following are lists of device errors which require
troubleshooting by a service engineer.
■Internal and optical errors
"E" and "alarm number" are displayed back and forth.
■Overrun error
"F" and "alarm number" are displayed back and forth.
■Chip error
"C" and "alarm number" are displayed back and forth.
Display Item Resolution
E0 Flatbed motor
malfunction
(fi-6230Z/fi-6240Z)
1 Confirm that the transport lock
switch is not locked.
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
E1 Optical error
(Flatbed)
(fi-6230Z/fi-6240Z)
E2 Optical error (ADF
Front)
1 Clean the glass section.
For details about cleaning, refer to
"Chapter 6 Daily Care" (page 108).
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
E3 Optical error (ADF
Back)
E6 Operator panel
error
Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
E7 EEPROM error
E8 SCSI error
(fi-6140Z/fi-6240Z)
E9 Memory error
Display Item Resolution
F4 Background
switching
mechanism error
Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
Display Item Resolution
C0 LSI error Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
129
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
■Motor circuit error
"H" and "alarm number" are displayed back and forth.
■Option error (when imprinter is installed)
"A" and "alarm number" are displayed back and forth.
■Sensor error
"L" and "alarm number" are displayed back and forth.
Display Item Resolution
H0 Motor circuit error Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
H6 Imprinter system
malfunction
H7 Lamp circuit error
H8 Motor circuit error
(background
switching
mechanism)
Display Item Resolution
A0 Imprinter error
(control board)
1 Confirm that the EXT cable of the
imprinter is connected properly to
the EXT connector on the back of
the scanner.
For details, refer to the fi-614PR
Operator’s Guide.
2 Confirm that the print cartridge is
installed correctly.
For details, refer to the fi-614PR
Operator’s Guide.
3 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
A1 Imprinter error
(communication
time-out)
A2 Imprinter error
(print head)
A3 Imprinter error
(EEPROM)
A4 Imprinter error
(ROM)
Display Item Resolution
L6 Sensor error 1 Clear any dust around the
ultrasonic sensors.
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
130
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
This section describes the resolutions for troubles that may
occur while using the scanner. Please check the following
items before you request a repair. If the problem persists,
check each item in "8.4 Before You Contact the Scanner
Service Provider" (page 149), and then contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service
provider.
The following are some examples of troubles that you may
experience.
8.3 Troubleshooting
Symptoms
"Scanner cannot be powered ON." (page 131)
"The Function Number Display switches OFF." (page 132)
"Scanning does not start." (page 133)
"Image quality is poor when scanning pictures/photos in black & white."
(page 134)
"Quality of scanned text or lines is unsatisfactory." (page 135)
"Images are distorted or not clear." (page 136)
"Vertical streaks appear on the scanned image." (page 137)
""E" (or other number/letter) is already displayed on the Function
Number Display after power-on." (page 138)
"Multifeed error occurs frequently." (page 139)
"Situation in which the document is not fed into the ADF occurs
frequently." (page 141)
"Paper jams/pick errors occur frequently." (page 142)
"Scanned images turn out elongated." (page 143)
"A shadow appears at the top or the bottom of the scanned image."
(page 144)
"There are black traces on the document." (page 145)
"The Carrier Sheet is not fed smoothly. / Paper jams occur." (page 146)
"Part of the image appears missing when using the Carrier Sheet."
(page 148)
Symptoms
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
131
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Scanner cannot be powered ON.
Is the power cable connected properly?
No
Connect the power cable properly.
Yes
Did you press the [Power] button on the scanner's
operator panel? No
Press the [Power] button on the operator panel.
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
132
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
The Function Number Display switches OFF.
Has the scanner been left out of operation for a long time
after being powered on? Yes
The scanner is in power saving mode.
Resume from power saving mode by one of the following methods:
zLoad a document in the ADF paper chute
zPress any button on the operator panel
(Note that pressing the [Power] button for more than 2 seconds will turn the
power off.)
zPerform scanning from an application
No
Does it remain switched off even if you turn the scanner off
then back on? No
The scanner is operating correctly.
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
133
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Scanning does not start.
Did you unlock the transport lock switch?
(fi-6230Z/fi-6240Z) No
Turn off the scanner, and unlock the transport lock switch.
For details, refer to "Installing the Scanner" in Getting Started.
Yes
Is the document loaded in the ADF paper chute correctly?
No
Reload the document in the ADF paper chute.
Yes
Is the ADF closed properly?
No
Remove the documents from the ADF paper chute, then open and close the ADF.
Yes
Is the USB/SCSI cable connected properly?
No
Connect the USB/SCSI cable properly.
For details, refer to "Connecting the Cables" in Getting Started.
Yes
Is the connector on the USB/SCSI cable broken or
damaged? Yes
Use a new cable and make sure that it is connected properly.
No
Is the SCSI ID set correctly?
(For SCSI connection) No
Turn off the scanner and the computer, and configure the correct SCSI ID. Then
restart the computer after turning the scanner back on.
For details about the SCSI ID setting, refer to “Connecting the Cables” in Getting
Started.
Yes
Does scanning start after turning the scanner off then back
on? Yes
The scanner is operating correctly.
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
134
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Image quality is poor when scanning pictures/
photos in black & white.
*1: The scanned image may differ from the original image significantly if
you simply "binarize" (output in black & white) a picture or a photo. If
the setting can be configured from the scanner driver's setup dialog
box, set the image mode to [Halftone] or [Grayscale].
Are you scanning in "Halftone" or "Grayscale"?
No
Select [Halftone] or [Grayscale] in the scanner driver and scan. (*1)
Yes
Are the glasses inside the ADF clean?
No
Clean the inside of the ADF.
For details, refer to "Chapter 6 Daily Care" (page 108).
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
135
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Quality of scanned text or lines is unsatisfactory.
*1: When scanning in halftone, grayscale or color, the scanned image may
not become sharp and clear. If it can be configured in the scanner
driver's setup dialog box, set the image mode to [Binary (black and
white)].
ADF: Are the glass and rollers inside the ADF clean?
Flatbed (fi-6230Z/fi-6240Z): Is the document pad clean? No
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page 108).
Yes
Is the resolution appropriate?
No
Specify a higher resolution in the scanner driver.
Yes
Is [Binary (black and white)] mode selected?
No
Select [Binary (black and white)] in the scanner driver. (*1)
Yes
Is there any foreign matter (e.g. dust, paper dust) on the
document? Yes
Remove the foreign matter off the document.
It may be carried onto the glass inside the ADF or the document bed of the flatbed
(fi-6230Z/fi-6240Z), and cause the image to become dirty.
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
136
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Images are distorted or not clear.
ADF: Are the glass and rollers inside the ADF clean?
Flatbed (fi-6230Z/fi-6240Z): Is the document pad clean? No
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page 108).
Yes
Is the ADF being pushed down during scanning? Is there a
heavy object on top of the ADF? Yes
Do not push down the top the ADF, or place any heavy objects on the ADF during
scanning.
No
Is anything causing the scanner to vibrate during
scanning? Yes
Do not allow the scanner to vibrate during scanning.
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner? No
Either place the scanner on a flat and level surface, or attach the rubber pads on
the bottom of the scanner.
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
137
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Vertical streaks appear on the scanned image.
Do the streaks always appear in the same location?
Yes
Clean the glass and rollers inside the ADF, or the document bed of the flatbed (fi-
6230Z/fi-6240Z).
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Does the vertical streak disappear when you set a lower
resolution? Yes
Specify a lower resolution.
No
Is there any foreign matter (e.g. paper dust, dirt) stuck on
the document? Yes
Remove any foreign matter off the document.
It may be carried onto the glass inside the ADF or the document bed of the flatbed
(fi-6230Z/fi-6240Z), and cause these streaks to appear on the image.
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
138
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
"E" (or other number/letter) is already displayed
on the Function Number Display after power-on.
Did you unlock the transport lock switch?
(fi-6230Z/fi-6240Z) No
Turn off the scanner, and unlock the transport lock switch.
For details, refer to "Installing the Scanner" in Getting Started.
Yes
Does the problem persist after turning the power off then
back on? No
The scanner is operating correctly.
Yes
Is "c" flashing on the Function Number Display, and is the
LED indicator flashing as well? Yes
Close the ADF properly.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
If the indication does not return to "1" (ready) after closing the ADF, check the
items in "8.4 Before You Contact the Scanner Service Provider" (page 149) first,
then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
139
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Multifeed error occurs frequently.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page 41)?No
Use documents that meet the requirements.
For details, refer to "2.3 Documents for Scanning (ADF)" (page 41).
Yes
If you are using the Carrier Sheet, is [Double-page
spread], [Clipping (Front)] or [Clipping (Duplex)] specified
for [Scan Type] in the scanner driver’s setup dialog box? No
Specify either [Double-page spread], [Clipping (Front)] or [Clipping (Duplex)].
For details, refer to "Documents Larger than A4/Letter Size" (page 70) or
"Scanning Photographs and Clippings" (page 73).
Yes
If multifeed detection is enabled, is there any document in
the batch that does not fulfill the conditions for an accurate
detection? Yes
Fulfill the conditions for an accurate multifeed detection.
For details, refer to "Conditions for Multifeed Detection" (page 45).
Also specify the multifeed detection area if necessary ("Detecting Multifeed Errors"
(page 103)).
No
Did you scan a plastic card or any other thick document?
Yes
Disable multifeed detection.
No
Did you fan the documents before loading them?
No
Fan the documents.
Yes
Have the documents just been printed out from a copy
machine or a laser printer? Yes
Fan the documents a few times to remove static electricity.
No
Is the document stack thinner than 5 mm?
No
Reduce the number of sheets.
Yes
Are the consumables (*1) installed correctly?
No
Install the consumables correctly.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
Yes
Are the consumables dirty?
Yes
Clean the consumables.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
140
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
*1: "Consumables" refers to the brake roller and the pick roller.
No (continued)
Are the consumables worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
141
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Situation in which the document is not fed into
the ADF occurs frequently.
*1: "Consumables" refers to the brake roller and the pick roller.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page 41)?No
Use documents that meet the requirements.
For details, refer to "2.3 Documents for Scanning (ADF)" (page 41).
Yes
Did you fan the documents before loading them in the ADF
paper chute? No
Fan the documents before loading, or reduce the amount of documents.
Yes
Are the consumables (*1) installed correctly?
No
Install the consumables correctly.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
Yes
Are the consumables dirty?
Yes
Clean the consumables.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Are the consumables worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
142
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Paper jams/pick errors occur frequently.
*1: "Consumables" refers to the brake roller and the pick roller.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page 41)?No
Use documents that meet the requirements.
For details, refer to "2.3 Documents for Scanning (ADF)" (page 41).
Yes
Is the inside of the ADF free of foreign matter?
Yes
Clean or remove any foreign matter from the ADF.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Are the consumables (*1) installed correctly?
No
Install the consumables correctly.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
Yes
Are the consumables dirty?
Yes
Clean the consumables.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Are the consumables worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
143
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Scanned images turn out elongated.
*1: "Consumables" refers to the brake roller and the pick roller.
Are the rollers dirty?
Yes
Clean the rollers.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page 41)?No
Use documents that meet the specification.
For details, refer to "2.3 Documents for Scanning (ADF)" (page 41).
Yes
Are the consumables (*1) worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
No
Have you adjusted the offset/vertical magnification?
No
In [Device Setting] of the Software Operation Panel, adjust the offset in feed
direction (vertical magnification).
For details, refer to "Adjusting the Position to Start the Scan [Offset/Vertical
magnification Adjustment]" (page 169).
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
144
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
A shadow appears at the top or the bottom of the
scanned image.
Have you adjusted the offset (position to start the scan)?
No
In [Device Setting] of the Software Operation Panel, adjust the offset in the sub-
scanning direction.
For details, refer to "Adjusting the Position to Start the Scan [Offset/Vertical
magnification Adjustment]" (page 169).
Yes
Did you use the Page Edge Filler function?
No
In [Device Setting 2] of the Software Operation Panel, use the Page Edge Filler
function to fill out the shadow around the edge.
For details, refer to "Removing Shadows/Streaks that Appear around the Scanned
Image [Page Edge Filler (ADF)] / [Page Edge Filler (FB)] (fi-6230Z/fi-6240Z)"
(page 171).
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
145
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
There are black traces on the document.
Are you scanning documents written in lead pencil?
Yes
When you scan documents written in lead pencil, make sure to clean the rollers
frequently. Otherwise, the rollers will be contaminated which may leave black
traces on the document or cause feeding errors.
For details about cleaning, refer to "Chapter 6 Daily Care" (page 108).
No
Are the glass and rollers inside the ADF clean?
No
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page 108).
Yes If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
146
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
The Carrier Sheet is not fed smoothly. / Paper
jams occur.
Did you scan just the Carrier Sheet continuously?
Yes
Feed about 50 sheets of PPC paper (recycled paper) before scanning with the
Carrier Sheet. The PPC paper can either be blank or printed.
No
Is the Carrier Sheet clean?
No
Perform one of the following.
zClean the Carrier Sheet.
For details about cleaning, refer to "Chapter 6 Daily Care" (page 108).
zReplace the Carrier Sheet.
For information on purchasing the Carrier Sheet, refer to "A.4 Scanner Options"
(page 196).
Yes
Did you start the scan after loading the Carrier Sheet in the
ADF paper chute? No
Start the scan after loading the Carrier Sheet in the ADF paper chute.
For details about loading the Carrier Sheet, refer to "Documents Larger than A4/
Letter Size" (page 70) or "Scanning Photographs and Clippings" (page 73).
Yes
Are the glass and rollers inside the ADF clean?
No
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page 108).
Yes
Are the consumables (*1) worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page 117).
No
Is there any foreign matter inside the ADF?
Yes
Remove the foreign matter and clean the ADF.
For details, refer to "Chapter 6 Daily Care" (page 108).
No
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
147
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
*1: "Consumables" refers to the brake roller and the pick roller.
No (continued)
Did you place a thick document inside the Carrier Sheet?
Yes
Some papers may be too thick to place inside the Carrier Sheet.
For details about the thickness of documents that can be placed inside the Carrier
Sheet, refer to " Conditions for Using the Carrier Sheet" (page 50).
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
148
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Part of the image appears missing when using
the Carrier Sheet.
Did you place several small documents (e.g. photos,
postcards) in the Carrier Sheet for scanning? Yes
Place only one document at a time in the Carrier Sheet.
No
Does the fold line of the document hang off the Carrier
Sheet? Yes
Part of the image around where the document is folded may appear missing.
Place the document so its fold line is set about 1 mm inside from the edge of the
Carrier Sheet.
No If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 149) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
149
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Please check the following items before contacting your
FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
General
8.4 Before You Contact the Scanner Service Provider
Item Findings
Scanner model
name Example: fi-6240Z
For details, refer to "8.5 Checking the Product
Labels" (page 151).
Serial No.
Example: 000001
For details, refer to "8.5 Checking the Product
Labels" (page 151).
Date of manufacture
Example: 2011-06 (June 2011)
For details, refer to "8.5 Checking the Product
Labels" (page 151).
Date of purchase
Symptom
Frequency of
trouble
Warranty
Options used
Example: fi-614PR
For details, refer to "A.4 Scanner Options" (page
196).
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
150
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Error Status
■Computer connection issues
■Feeding issues
■Image quality issues
■Other
Item Findings
Operating system
(Windows)
Error message
Interface
Example: USB interface
Interface controller
Item Findings
Paper type
Main purpose of use
Date of last cleaning
Date of consumable
replacement
Operator panel
status
Item Findings
Scanner driver and
version
Interface controller
Operating system
(Windows)
Application
Example: ScandAll PRO
Scanning side(s)
Example: front, back, both
Resolution
Example: 600 dpi, 75 dpi
Image mode
Example: color, grayscale, black & white
Item Findings
Can you send the
output image and a
photo that shows
the paper condition
by e-mail or fax?
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
151
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
This section explains about the product labels on the scanner.
Location
The location of the two labels are as follows:
Label A (example): Shows the scanner information.
Label B (example): Shows the standards that the scanner
conforms to.
8.5 Checking the Product Labels
Label A Label B
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Chapter 9 Operational Settings
This chapter explains how to use the Software Operation Panel to configure the scanner settings.
9.1 Starting Up the Software Operation Panel................................................................................................153
9.2 Password Setting......................................................................................................................................154
9.3 Configuration Items ..................................................................................................................................160
9.4 Settings Related to Page Counters ..........................................................................................................166
9.5 Settings Related to Scanning ...................................................................................................................169
9.6 Settings Related to Multifeed Detection ...................................................................................................180
9.7 Settings Related to Waiting Time .............................................................................................................186
9.8 Settings Related to Power ON/OFF .........................................................................................................188
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
153
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
The Software Operation Panel (SOP) is installed together with
TWAIN driver, ISIS driver and Kofax VRS.
This application allows you to configure various settings such
as the operation of the scanner and managing the
consumables.
1Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 23).
2Select the [Start] menu J [All Programs] J [Scanner
Utility for Microsoft Windows] J [Software Operation
Panel].
DThe [FUJITSU Software Operation Panel] dialog box appears.
DThe Software Operation Panel icon is displayed in the menu that
appears when you click on the taskbar.
To have the Software Operation Panel icon always displayed on
the taskbar, drag the icon and drop it onto the taskbar.
Procedures from here will be explained under the assumption that
the Software Operation Panel is always displayed on the taskbar.
9.1 Starting Up the Software Operation Panel
！
！
！zDo not use the operator panel while the Software Operation
Panel is running.
zIf you connect multiple scanners, the second scanner and
so forth will not be recognized.
Connect only one scanner at a time.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
154
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
By setting a password, the Software Operation Panel can run
in [View Only mode] which allows users to only view the
scanner settings.
The scanner settings can be configured if no password is set.
In order to prevent unnecessary changes to the settings, a
password can be used to restrict user operations.
Setting a Password
Set a password in the following procedure.
1Right-click the Software Operation Panel icon on the
taskbar, and select [Password Setting] from the menu.
DThe [Password setting] dialog box appears.
2Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
DA confirmation message appears.
3Click the [OK] button.
DThe password is set.
9.2 Password Setting
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
155
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Setting the [View Only mode]
Set the Software Operation Panel to [View Only mode] in the
following procedure.
1Set a password.
For details, refer to "Setting a Password" (page 154).
2Right-click the Software Operation Panel icon on the
taskbar, and select [View Only mode] from the menu.
DThe Software Operation Panel enters the [View Only mode].
In [View Only mode], a check mark appears next to [View
Only mode] in the menu that is displayed by right-clicking
the Software Operation Panel icon.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
156
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Clearing the [View Only mode]
Clear the [View Only mode] in the following procedure.
1Right-click the Software Operation Panel icon on the
taskbar, and select [View Only mode] from the menu.
DThe [Password setting] dialog box appears.
2Enter the current password and click the [OK] button.
D[View Only mode] is cleared, and the scanner settings can now be
changed.
When you exit [View Only mode], the check mark next to
[View Only mode] disappears from the menu that is
displayed by right-clicking the Software Operation Panel
icon.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
157
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Changing the Password
Change the password in the following procedure.
1Right-click the Software Operation Panel icon on the
taskbar, and select [Password Setting] from the menu.
DThe [Password setting] dialog box appears.
2Enter the current password and click the [OK] button.
DThe [Password setting] dialog box appears.
3Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
DA confirmation message appears.
4Click the [OK] button.
DThe password is set.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
158
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Clearing the Password
Clear the password in the following procedure.
1Right-click the Software Operation Panel icon on the
taskbar, and select [Password Setting] from the menu.
DThe [Password setting] dialog box appears.
2Enter the current password and click the [OK] button.
DThe [Password setting] dialog box appears.
3Leave both fields blank and click the [OK] button.
DA confirmation message appears.
4Click the [OK] button.
DThe password is cleared.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
159
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Resetting the Password
In case you forgot your password, it can be reset in the
following procedure.
1Right-click the Software Operation Panel icon on the
taskbar, and select [Password Setting] from the menu.
DThe [Password setting] dialog box appears.
2Enter the default password which is "fi-scanner", and click
the [OK] button.
DThe [Password setting] dialog box appears.
3Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
DA confirmation message appears.
4Click the [OK] button.
DThe password is set.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
160
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
The Software Operation Panel allows the configuration of the
following settings for the scanner that is connected to the
computer.
Device Setting
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting].
Items that can be configured in the above dialog box are shown in the
next page.
9.3 Configuration Items
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
161
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
*1: Displayed when using the fi-6230Z or fi-6240Z.
*2: Displayed when the imprinter is installed.
Item Description Parameter/Value Factory Default
Page Counter
(page 166)
Check the counters to determine when to replace
the consumables.
Also use it to reset the counters after replacing the
consumables.
Total Page Count(ADF) / Total Page Count(FB) (*1)
/ Brake Roller / Pick Roller
0
Remaining Ink (*2)
Power saving
(page 187)
Specify the waiting time before entering power
saving mode.
Range: 5 to 235 min. (in increments of 5) 15 min.
Offset Setting
(page 169)
Adjust the position to start the scan on the selected
scanning side(s).
Unit: Flat bed (*1) / ADF(front) / ADF(back)
Main/Sub: -2 to +2 mm (in increments of 0.5)
Main/Sub: 0 mm
Vertical magnification
Adjustment
(page 169)
Adjust the magnification level in feed direction for
the selected scanning method.
Unit: Flat bed (*1) / ADF
Range: -3.1 to 3.1% (in increments of 0.1)
0%
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
162
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Device Setting 2
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2].
When you click on an item from the list, the details of the setting
(parameters) are displayed on the right.
[Default] button resets the settings to factory default.
[Save] button saves the value configured in the Software Operation
Panel to a file.
[Restore] button restores the file that contains the values configured
in the Software Operation Panel.
Items that can be configured in the above dialog box are shown in the
next page.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
163
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Item Description Parameter/Value Factory Default
Multifeed
(page 180)
Specify a method for multifeed detection. Detect
multifeeds by monitoring the overlap, document
length, or the combination of both.
This setting can also be configured from the
scanner driver's setup dialog box. Note that priority
is given to the scanner driver setting.
None / Check Overlapping (Ultrasonic) / Check
Length / Check Overlapping and Length
Length (When [Check Length] is specified, select
from 10/15/20 mm)
None
Length: 10 mm
Page Edge Filler
(ADF)
Page Edge Filler
(FB)(*1)
(page 171)
Specify a width for the margin around the edge of
the scanned image to fill in white or black, according
to the background color.
With TWAIN driver, this setting can also be
configured from the scanner driver's setup dialog
box. In that case, “Page Edge Filler” of the TWAIN
driver is used on the output image.
ADF:
Top / Left / Right: 0 to 15 mm
Bottom: -7 to 7 mm (in increments of 1)
FB (*1):
Top / Bottom / Left / Right: 0 to 15 mm
(A: image, B: filled area, A+B: output)
Top/Bottom/Left/
Right: 0 mm
Dropout color
(page 173)
Select a color to be removed from the scanned
image (only available in black & white or grayscale
mode).
With TWAIN driver, this setting can also be
configured from the scanner driver's setup dialog
box. Note that priority is given to the scanner driver
setting.
With ISIS driver, the scanner driver setting is
enabled at all times.
Red / Green / Blue / None Green
Pre-Pick
(page 174)
Select [Yes] to prioritize the processing speed and
[No] for otherwise.
This setting can also be configured from the
scanner driver's setup dialog box. Note that priority
is given to the scanner driver setting.
Yes / No Yes
B
A
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
164
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Document check area
specification for
Multifeed Detection
(page 182)
Selected range: Select this item to restrict the area
to run multifeed detection.
[Selected range] check box Not selected
Enable / Disable (Middle): Specify whether to enable
or disable multifeed detection in the selected area.
Enable / Disable
(When [Selected range] is selected)
Disable
Start (Middle): Specify the start position of the area
in length (mm) from the leading edge of the
document.
0 to 510 mm (in increments of 2) 0 mm
End (Middle): Specify the end position of the area in
length (mm) from the leading edge of the document.
0 to 510 mm (in increments of 2) 0 mm
Intelligent Multifeed
Function
(page 185)
When there is a paper of the same size attached to
a designated location on the page, configure the
scanner to memorize the location of the attachment
and not detect multifeeds for that location.
Note that you first need to select [Check
Overlapping (Ultrasonic)] or [Check Overlapping
and length] in either the scanner driver’s setup
dialog box or the multifeed detection setting in
"Specifying a Multifeed Detection Method
[Multifeed]" (page 180).
Manual mode / Auto mode 1 / Auto mode 2 Manual mode
Select to clear the overlap pattern (length, location)
memorized in Auto mode.
[Clear overlap pattern] check box Not selected
Specify whether or not to memorize the multifeed
pattern upon power-off.
Remember / Do not remember Do not remember
Number of paper
feeding retries
(page 175)
Configure this setting to change the number of
feeding retries when a pick error occurs.
1 to 12 times 7 times
Life Counter Alarm
Setting
(page 168)
Specify the replacement cycle for the consumables. Pick Rollers / Brake Rollers:
10,000 to 2,550,000 sheets
(in increments of 10,000)
Pick Rollers:
200,000 sheets
Brake Rollers:
200,000 sheets
Item Description Parameter/Value Factory Default
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
165
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
*1: Displayed when using the fi-6230Z or fi-6240Z.
*2: Displayed when using the fi-6140Z or fi-6240Z.
AutoCrop Boundary
(page 176)
Specify whether or not to optimize (round up/down)
the fractional part of the scanned image data.
Optimize / Round Down Optimize
Manual-feed timeout
(page 186)
Select whether to disable or enable manual feeding. Disable / Enable Disable
Paper-out detection time: Specify the waiting time to
cancel manual feeding.
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110
(seconds)
10 seconds
Power SW Control
(page 188)
Specify the method by which the scanner is
powered on/off.
Enable power switch / Disable power switch /
Enable USB power feeding
Enable power
switch
Paper Protection
(page 177)
Specify whether to enable or disable paper
protection.
Enabling this setting reduces the risk of having the
documents damaged upon feeding errors, by
stopping the scan when the scanner detects a
document that is unusually warped.
Paper protection is disabled in manual feed mode.
This setting can also be configured from the
scanner driver's setup dialog box. Note that priority
is given to the scanner driver setting.
Enable / Disable Enable
Paper Protection
Sensitivity
(page 178)
Specify the level of sensitivity to detect anomalies
upon feeding the documents when paper protection
is enabled.
Low / Normal / High Normal
Feed Mode (*2)
(page 179)
Configure this setting to scan plastic cards with a
thickness up to 1.4 mm when using fi-6140Z/fi-
6240Z (at 200 dpi (60 ppm) in landscape).
Normal / Thick cards (1.25 mm or more) Normal
Item Description Parameter/Value Factory Default
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
166
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Checking and Resetting the Counters
■Checking the counters
The status on each consumable part can be viewed to
determine when to replace the consumables. The color of the
counter changes to prompt replacement. The consumable
counter turns light yellow when the page count after replacing
the consumable reaches 95% of the value specified in
"Replacement Cycle of Consumables [Life Counter Alarm
Setting]" (page 168), and turns yellow when it reaches 100%.
Note that the color does not change for ink counter (only
displayed when imprinter is installed).
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting].
In this dialog box, you can check the following items:
9.4 Settings Related to Page Counters
Item Description
Total Page Count
(ADF)
Approximate total number of sheets
scanned through the ADF
Total Page Count (FB)
(fi-6230Z/fi-6240Z)
Approximate total number of sheets
scanned on the flatbed (fi-6230Z/fi-6240Z)
Brake Roller Number of sheets scanned after replacing
the brake roller
Pick Roller Number of sheets scanned after replacing
the pick roller
Remaining Ink Amount of ink remaining in the print
cartridge of the imprinter (option)
(Only displayed when imprinter is
installed)
！！！
If the scanner was turned off by unplugging the power
cable, or [Disable power switch] is selected, up to nine
sheets may not be counted in [Total Page Count].
For details about disabling the power switch, refer to
"Method of Turning the Scanner ON/OFF [Power SW
Control]" (page 188).
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
167
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
■Resetting the counters
When you have replaced a consumable, reset the
corresponding counter in the following procedure.
1Click the [Clear] button for the consumable that you
replaced.
DThe counter is reset to 0.
For ink counter, the value will be set to 100.
2Click the [OK] button in the Software Operation Panel.
DA confirmation message appears.
3Click the [OK] button.
DThe settings are saved.
■Message for replacing the consumable
The following message may appear while using the scanner.
Check the message and replace the consumable accordingly.
If you click the [Ignore] button, the message disappears and
the scan can be continued. However, it is recommended that
you replace the consumable as soon as possible.
To stop the scan and replace the consumable right away, click
the [Cancel] button.
For details about replacing consumables, refer to the
following:
z"7.2 Replacing the Brake Roller" (page 119)
z"7.3 Replacing the Pick Roller" (page 121)
Message
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
168
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Replacement Cycle of Consumables
[Life Counter Alarm Setting]
The replacement cycle for each consumable can be specified.
The background color of the counter (in [Device Setting])
changes to light yellow when the page count after replacing
the consumable reaches 95% of the value specified here, and
turns yellow when it reaches 100%.
A message that prompts consumable replacement (page 167)
also appears.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Life Counter Alarm Setting].
3Specify a value as the replacement cycle.
The value can range from 10,000 to 2,550,000 sheets (in increments
of 10,000).
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
169
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Adjusting the Position to Start the Scan
[Offset/Vertical magnification Adjustment]
When the output position of the scanned image is not correct
or the image appears shortened/elongated (vertically), adjust
the offset and the vertical magnification in the following
procedure.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting] and
click the [Offset] button.
9.5 Settings Related to Scanning
！
！
！Normally, you should not have to make any adjustments as the
factory default settings are configured at appropriate values.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
170
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
3Adjust the level of offset/vertical magnification as needed.
*1: Displayed when using fi-6230Z or fi-6240Z.
Offset Setting Description
Unit Select [Flat bed] (*1), [ADF (front)] or
[ADF (back)] as the target for offset adjustment.
Main Adjusts the horizontal (width) offset.
The value can range from -2 to +2 mm (in
increments of 0.5).
Sub Adjusts the vertical (length) offset.
The value can range from -2 to +2 mm (in
increments of 0.5).
Vertical magnification
Adjustment
Description
Unit Select [Flat bed] (*1) or [ADF] as the
target for vertical magnification
adjustment.
Vertical magnification
Adjustment
(Sub: length)
Adjusts the vertical (length)
magnification.
The value can range from -3.1 to
+3.1% (in increments of 0.1).
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
171
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Removing Shadows/Streaks that Appear around
the Scanned Image [Page Edge Filler (ADF)] /
[Page Edge Filler (FB)] (fi-6230Z/fi-6240Z)
Depending on the condition of the documents that you scan,
the shadow of the document may appear as black streaks.
In that case, you can improve the image quality around the
edges of the document by using the "Page Edge Filler"
function to fill in the edges.
1Start up the Software Operation Panel.
For details, refer to "9.1 Starting Up the Software Operation Panel"
(page 153).
2From the listing on the left, select [Device Setting 2] J
[Page Edge Filler (ADF)] or [Page Edge Filler (FB)].
3Specify the width of each margin to fill in: top/bottom/left/
right.
The specified area is filled in white or black, according to the
background color.
！！！
Note that if the target range of Page Edge Filler is too
wide, some characters near the edge may appear
missing.
L R
T
B
ADF
T : top = 0 to 15 mm
B : bottom = -7 to 7 mm
L : left = 0 to 15 mm
R : right = 0 to 15 mm
FB (fi-6230Z/fi-6240Z)
T : top = 0 to 15 mm
B : bottom = 0 to 15 mm
L : left = 0 to 15 mm
R : right = 0 to 15 mm
(in 1 mm increments)
Image area
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
172
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
zThe color of the background is normally white. You can
change it to [Black background] in the scanner driver.
For example, in TWAIN driver, select the [Option]
button J [Rotation] tab J [Automatic Size and Skew
detection] and then specify [Black Background].
zDepending on the value you specify, the bottom edge
is filled in as follows:
- 1 to 7 mm
Fills the margin in white, from the detected page
bottom.
- -1 to -7 mm
Outputs the image without filling in the margin.
“Detected page bottom” refers to the bottom edge of
the scanned document detected by the scanner.
zWith TWAIN driver, this setting can also be configured
from the scanner driver's setup dialog box. In that
case, “Page Edge Filler” of the TWAIN driver is used
on the output image.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
173
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Removing a Color from the Scanned Image
[Dropout color]
With "Dropout color", you can select either green, red, or blue
(primary colors) to remove the details of the selected color
from a scanned image.
For example, if a document with black characters and a green
background is scanned, only the black characters will appear
on the scanned image if [Green] is selected.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Dropout color].
3Select a color to drop out.
！！！
Dropout works the best with light (low intensity) colors, and
dark colors may not drop out.
Dropout color is only available in black & white or grayscale
mode.
Red, Green, Blue : The selected color is dropped out.
None : No color is dropped out.
！
！
！The Software Operation Panel allows you to choose the
color from red, green, and blue only. To drop out a color of
your choice, configure the setting from the scanner driver.
For more details, refer to "Removing a Color from the
Scanned Image (Dropout Color)" (page 82).
With TWAIN driver, this setting can also be configured
from the scanner driver's setup dialog box. Note that
priority is given to the scanner driver setting.
With ISIS driver, the scanner driver setting is enabled at
all times.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
174
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Shortening the Scanning Intervals [Pre-Pick]
"Pre-pick" refers to feeding the document to the starting
position for scanning before the next scan.
Enabling [Pre-Pick] shortens the interval between scanning
each document.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Pre-Pick].
3Select [Yes] or [No].
zIf you cancel in the middle of scanning while pre-pick
is enabled, you will have to remove the pre-picked
document, then load the document again.
zThis setting can also be configured from the scanner
driver's setup dialog box. Note that priority is given to
the scanner driver setting.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
175
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Number of Paper Feeding Retries
Configure this setting to change the number of feeding retries
when a pick error occurs.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Number of paper feeding retries].
3Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
176
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Cropping the Image Boundary
[AutoCrop Boundary]
Some fractional data may be generated in the images in the
process of scanning. You can specify whether to include or
exclude such fractional data by using the "AutoCrop
Boundary" function.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[AutoCrop Boundary].
3Select whether to include or exclude the fractional data.
Select [Optimize] to prevent any exclusion of fractional data from
scanned images.
！！！
zWhile selecting [Optimize] can prevent data loss, it
may also generate black lines near the right edge.
zWhen you scan a document with text near the right
edge while [Round Down] is selected, some pixel data
there may be lost.
zFor details about setting automatic page size
detection, refer to "Automatically Correcting Skewed
Images" (page 91).
This setting is only applied in black & white mode.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
177
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Protecting the Documents from Being Damaged
[Paper Protection]
Specify whether to enable or disable paper protection.
Feeding errors during scanning could damage or tear valuable
documents.
Enabling this setting reduces the risk of having the documents
damaged upon feeding errors, by stopping the scan when the
scanner detects a document that is unusually warped.
This function can be used to scan documents such as thin
papers which are difficult to feed.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Paper Protection].
3Specify whether to enable or disable paper protection.
When you select [Enable], the scanner stops the scan when it detects
a document that is unusually warped.
！！！
zNote that paper protection is a function that
suppresses the documents from being damaged, and
does not guarantee all documents to be saved.
zWhen you enable paper protection, make sure to set
the documents with their top edges aligned (especially
for a mixed batch with different lengths).
If the top edges are not aligned properly, the paper
protection function may be activated and stop the scan
even when the documents are being fed correctly.
zPaper protection is disabled in manual feed mode.
zThis setting can also be configured from the scanner
driver's setup dialog box. Note that priority is given to
the scanner driver setting.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
178
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Specifying the Sensitivity Level for Paper
Protection [Paper Protection Sensitivity]
You can specify the level of sensitivity to detect anomalies
upon feeding the documents when paper protection is
enabled.
Documents are deformed (e.g. warped, bent, creased) when
they are not being fed by the rollers properly. To detect such a
symptom and stop the scan, select [Low] to only detect
documents that are highly deformed, and [High] to also detect
documents that are slightly deformed.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Paper Protection Sensitivity].
3Specify the sensitivity level.
Low : Decreases the sensitivity level to detect warped
documents.
Normal : Monitors the documents in normal sensitivity.
Keep this setting for normal use.
High : Increases the sensitivity level to detect warped
documents.
If paper jams occur frequently, specify [Low].
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
179
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Scanning Thick Plastic Cards [Feed Mode]
(fi-6140Z/fi-6240Z)
When you use fi-6140Z/fi-6240Z to scan at 200 dpi (60 ppm)
in landscape, plastic cards with a thickness up to 1.4 mm can
be scanned.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Feed Mode].
3Specify the feed mode.
To scan a plastic card up to 1.4 mm thick, select [Thick cards (1.25
mm or more)].
！！！
Scanning speed slows down when you select [Thick
cards (1.25 mm or more)].
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
180
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Specifying a Multifeed Detection Method
[Multifeed]
Multifeed is an error where two or more sheets are fed through
the ADF at once. It is also called a multifeed when a different
document length is detected.
Not noticing multifeed errors while scanning may put you in a
situation where important data are missing from the scanned
images. Multifeed detection can be used to prevent such
troubles. When this function is enabled, an error message is
displayed as soon as it detects a multifeed, and stops the
scan. Note that multifeed cannot be detected within 30 mm
from the leading edge of the document.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Multifeed].
9.6 Settings Related to Multifeed Detection
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
181
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
3Select a detection method.
Method Description
None Does not detect multifeed.
Check
Overlapping
(Ultrasonic)
Detects multifeed by the overlapping of
documents.
When this is selected, you can also specify the
two following options:
zSpecify the detection range by the length from
the top of the document.
Proceed to "Specifying the Area to Detect
Multifeed [Document check area specification
for Multifeed Detection]" (page 182) for more
details.
zIgnore the multifeed when there is paper of the
same size attached to a designated location
on the page.
Proceed to "Ignoring Multifeed for a Set
Pattern" (page 105) for more details.
Check Length Detects multifeed by the difference in length of the
documents.
Note that multifeeds cannot be detected
accurately when scanning a mixed batch of
different sizes.
Check
Overlapping
and Length
Detects multifeed by the combination of [Check
Overlapping (Ultrasonic)] and [Check Length].
Note that multifeeds cannot be detected
accurately when scanning a mixed batch of
different sizes.
When this is selected, you can also specify the
two following options:
zSpecify the detection range by the length from
the top of the document.
Proceed to "Specifying the Area to Detect
Multifeed [Document check area specification
for Multifeed Detection]" (page 182) for more
details.
zIgnore the multifeed when there is paper of the
same size attached to a designated location
on the page.
Proceed to "Ignoring Multifeed for a Set
Pattern" (page 105) for more details.
Length Select a length difference from 10/15/20 mm. Any
length under the specified value will not be
detected as multifeed.
！
！
！zTo scan documents with different lengths, specify
[Check Overlapping (Ultrasonic)].
zWhen a photograph or a piece of paper is attached on
the document, the overlapping part of the document
may be falsely detected as multifeed if [Check
Overlapping (Ultrasonic)] is specified. In that case,
specify [Check Length].
Note however that [Check Overlapping (Ultrasonic)]
can still be used by restricting the detection range.
zMultifeed cannot be detected when using the Carrier
Sheet.
This setting can also be configured from the scanner
driver's setup dialog box. Note that priority is given to the
scanner driver setting.
Method Description
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
182
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Specifying the Area to Detect Multifeed
[Document check area specification for Multifeed
Detection]
The following setting is only available when you specified
[Check Overlapping (Ultrasonic)] or [Check Overlapping and
Length].
1From the listing on the left, select [Device Setting 2] J
[Document check area specification for Multifeed
Detection].
Select the [Selected range] check box in the dialog box.
2Specify the detection range.
Range Description
Selected range Select the check box to specify the detection
range (colored in light blue) in the picture below.
Select the check box to enable the setting in this
dialog box. Clear the check box to disable the
setting. Clearing this check box sets both start
and end positions to "0", making the whole
document to be detected for multifeeds.
The above condition applies when the document
is set to the center of the pick roller width.
Disable
(Middle)
Does not detect multifeeds for the selected area.
Enable
(Middle)
Detects multifeeds for the selected area.
Start
(Middle)
Displays the start position of the detection by the
length from the leading edge of the document.
Range: 0 to 510 mm, in 2 mm increments,
Start<End
End
(Middle)
Displays the end position of the detection by the
length from the leading edge of the document.
Range: 0 to 510 mm, in 2 mm increments,
Start<End
35
Middle
Range
Document
Feed direction
Unit: mm
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
183
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Example 1:
Position: Middle
Selected range = Enable, Start = 50 mm, End = 200 mm
Multifeeds are detected for the area in light blue.
zWhen both [Start] and [End] are set to "0", multifeed
detection is performed for the whole area regardless of
whether it is enabled or disabled.
zTo disable multifeed detection for the whole document,
select [Disable] and set the start position to "0" and the
end position to equal the document length or longer.
zIf you set a value larger than the document length for
the start position, selecting [Disable] detects the whole
length of the document and selecting [Enable] disables
the multifeed detection.
zTo detect multifeeds, the detection range must be at
least 5 mm in length.
Configure the setting so that the value of the end
position minus the start position is 6 mm or more.
zYou can also set the start and the end positions by the
following methods:
- Draw an area with the mouse on the displayed
image.
- Drag the handles for [Start] and [End] positions on
the displayed image.
35
50
200
Feed direction
Unit: mm
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
184
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Example 2:
Position: Middle
Selected range = Enable, Start = 0 mm, End = 0 mm
Multifeeds are detected for the area in light blue.
Example 3: (Bad example)
Position: Middle
Selected range = Enable, Start = 100 mm, End = 102 mm
Since the detection range (length) is less than 5 mm,
multifeeds cannot be detected accurately.
When you use detection by overlapping, accuracy of multifeed
detection may drop if the documents are glued tightly or
attached together by static electricity.
35
300
Feed direction
Unit: mm
35
300
2
100
Feed direction
Unit: mm
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
185
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Specifying an Area Not to Detect Multifeed
[Intelligent Multifeed Function]
When there is paper of the same size attached to a
designated location on the page, the scanner memorizes the
location of the attachment and can be configured not to detect
multifeeds for that location. Note that you first need to select
[Check Overlapping (Ultrasonic)] or [Check Overlapping and
length] in either the scanner driver’s setup dialog box or the
multifeed detection setting in "Specifying a Multifeed Detection
Method [Multifeed]" (page 180).
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Intelligent Multifeed Function].
3Select an operation mode and click the [OK] button.
For details about the procedure after this step, refer to "Ignoring
Multifeed for a Set Pattern" (page 105).
Mode Description
Manual mode Does not memorize the size or location of the
paper attachment when a multifeed is detected.
Ignores the multifeed when you load the
documents back in the ADF paper chute and
scan them again.
Auto mode 1 Memorizes the size and location of the paper
attachment when a multifeed is detected. The
memorized pattern is ignored from the next
scan.
Auto mode 2 Memorizes the size of the paper attachment
when a multifeed is detected. The memorized
pattern (including any length less than the
attachment) is ignored from the next scan.
zBy selecting the [Clear overlap pattern] check box, you
can erase the overlapping patterns (length, position)
that were memorized in Auto mode.
zIn [Remember multifeed pattern at power-off], you can
select whether or not to keep the multifeed pattern
upon turning the power off. When [Remember] is
selected, you can use eight (pages worth) of the most
recent patterns the next time the scanner is powered
on.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
186
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Waiting Time in Manual Feed Mode
[Manual-feed timeout]
When you scan by manually loading one sheet at a time, you
can specify the waiting time (interval) for loading the next
document in the ADF paper chute. This enables continuous
scanning as long as you load a document within the set time.
If not, the scan is finished automatically and manual feeding
will be canceled. Note that you can also press the [Send to]
button on the operator panel to cancel manual feeding.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Manual-feed timeout].
3Specify whether to enable or disable [Manual-feed
timeout].
If you selected [Enable], then also specify the time in [Paper-out
detection time].
9.7 Settings Related to Waiting Time
When [Manual-feed timeout] is enabled, the scanner will
wait for the set time even if you start scanning with no
document in the ADF paper chute.
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
187
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Waiting Time to Enter Power Saving Mode
[Power saving]
The waiting time for the scanner to enter power saving mode
can be specified.
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting].
3Use the slider to specify the waiting time before entering
power saving mode.
The value can range from 5 to 235 minutes (in increments of 5).
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
188
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Method of Turning the Scanner ON/OFF
[Power SW Control]
The method by which the scanner is powered on/off can be
specified from one of the following:
zPress the [Power] button on the operator panel
zUnplug the power cable then plug it back in
zHave the scanner turn on/off in sync with the computer's power
1Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2From the listing on the left, select [Device Setting 2] J
[Power SW Control].
3Select one of the following:
9.8 Settings Related to Power ON/OFF
[Enable power switch] : Press the [Power] button on the operator
panel.
[Disable power switch] : Unplug the power cable then plug it back
in.
[Enable USB power
feeding]
: Have the scanner turn ON/OFF in sync
with the computer's power.
！
！
！Some types of computers and USB hubs keep supplying
power to the USB bus even after the computer is turned
off.
In that case, the [Enable USB power feeding] mode may
not work properly.
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Appendix
Glossary
Introduction
Index
Contents
TOP
Operational
Settings
Appendix
This appendix provides the following information.
A.1 Basic Specification ...................................................................................................................................190
A.2 Installation Specification...........................................................................................................................193
A.3 Outer Dimensions ....................................................................................................................................195
A.4 Scanner Options ......................................................................................................................................196
A.5 Uninstalling the Software .........................................................................................................................197
Appendix
Appendix
Glossary
Introduction
Index
Contents
190
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
A.1 Basic Specification
Item Specification Notes
fi-6130Z fi-6230Z fi-6140Z fi-6240Z
Scanner type ADF ADF + Flatbed ADF ADF + Flatbed -
Image sensor Color CCD ×2
(front, back)
Color CCD ×3
(front, back,
flatbed)
Color CCD ×2
(front, back)
Color CCD ×3
(front, back,
flatbed)
-
Light source White cold
cathode
fluorescent lamp
×2
(front, back)
White cold
cathode
fluorescent lamp
×3
(front, back,
flatbed)
White cold
cathode
fluorescent lamp
×2
(front, back)
White cold
cathode
fluorescent lamp
×3
(front, back,
flatbed)
-
Scanning area Minimum ADF 52 × 74 (mm) / 2.05 × 2.91 (in.) (landscape/portrait) (*1)
Maximum ADF 216 × 355.6 (mm) / 8.5 × 14 (in.) (*2)
Flatbed -216 × 297 (mm) /
8.5 × 11.69 (in.) -216 × 297 (mm) /
8.5 × 11.69 (in.)
-
Paper weight (thickness) 41 to 209 g/m² (11 to 56 lb)
127 to 209 g/m² (34 to 56 lb) for A8 size
1.4 mm or less for plastic cards (*3)
(*4)
Appendix
Appendix
Glossary
Introduction
Index
Contents
191
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
*1: The minimum scanning area (A8 size) only applies to using the ADF. There is no limitation when using the flatbed.
*2: Long page scanning supports documents with a length up to 3,048 mm (120 in.).
For documents longer than 864 mm (34.02 in.), the resolution must be set to 200 dpi or less.
Scanning
speed
(A4 landscape)
(*5)
Binary
(black & white) Simplex: 40 ppm
Duplex : 80 ipm
Simplex: 60 ppm
Duplex : 120 ipm
200 dpi
Grayscale
Color
Binary
(black & white) Simplex: 30 ppm
Duplex : 60 ipm
Simplex: 40 ppm
Duplex : 80 ipm
300 dpi
Grayscale
Color
Loading capacity (*6) 50 sheets Paper weight: 80 g/m² (20 lb)
Total thickness: 5 mm or less
Optical resolution 600 dpi -
Output
resolution
Binary
(black & white)
50 to 600 dpi, 1200 dpi
50 to 600 dpi: configurable in 1
dpi increments
1200 dpi: available from scanner
driver
Grayscale
Color
Grayscale level 8-bit for each color 10-bit during internal processing
Halftone pattern Dither/error diffusion -
Interface (*7)(*8) USB 2.0/1.1 (*9) B Type
- Ultra SCSI Shielded 50-pin high-density type
Other Hardware real-time JPEG compression -
Item Specification Notes
fi-6130Z fi-6230Z fi-6140Z fi-6240Z
Appendix
Appendix
Glossary
Introduction
Index
Contents
192
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
*3: Up to 1.25 mm is supported for scanning at 200 dpi (60 ppm) in landscape when using fi-6140Z/fi-6240Z. This setting can be changed in the Software
Operation Panel to scan plastic cards with a thickness up to 1.4 mm.
For details, refer to " Scanning Thick Plastic Cards [Feed Mode] (fi-6140Z/fi-6240Z)" (page 179).
*4: The paper weight only applies to using the ADF. There is no limitation when using the flatbed.
*5: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*6: The capacity varies depending on the paper weight. See "2.3 Documents for Scanning (ADF)" (page 41) for details.
*7: USB 2.0/1.1 and Ultra SCSI interfaces cannot be used at the same time.
*8: You cannot connect multiple computers to the scanner using both types of interface cables at the same time.
*9: Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when using USB 1.1.
Appendix
Appendix
Glossary
Introduction
Index
Contents
193
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
A.2 Installation Specification
Item Specification
fi-6130Z fi-6230Z fi-6140Z fi-6240Z
Outer dimensions (W × D × H) (*1) 301 × 160 × 158 (mm) /
15.75 × 31.5 × 17.72 (in.)
301 × 567 × 229 (mm) /
15.75 × 31.5 × 17.72 (in.)
301 × 160 × 158 (mm) /
15.75 × 31.5 × 17.72 (in.)
301 × 567 × 229 (mm) /
15.75 × 31.5 × 17.72 (in.)
Installation space (W × D × H) (*2) 400 × 700 × 380 (mm) /
15.75 × 27.56 × 14.96 (in.)
400 × 800 × 450 (mm) /
15.75 × 31.5 × 17.72 (in.)
400 × 700 × 380 (mm) /
15.75 × 27.56 × 14.96 (in.)
400 × 800 × 450 (mm) /
15.75 × 31.5 × 17.72 (in.)
Weight 4.2 kg (9.26 lb) 8.8 kg (19.4 lb) 4.2 kg (9.26 lb) 8.8 kg (19.4 lb)
Input power Voltage range 100 Vac ±10%
Phase Single phase
Frequency range 50/60 ±3 Hz
Power
consumption
Operation ADF 38 W or less 42 W or less
Flatbed - 45 W or less - 50 W or less
Power saving 5.36 W or less 5.70 W or less
Power OFF 1.0 W or less
Ambient
condition
Temperature Operating: 5 to 35°C (41 to 95°F), Not operating: -20 to 60°C (-4 to 140°F)
Humidity Operating: 20 to 80% Not operating: 8 to 95%
Calorific value Operation ADF 32.7 kcal/Hr or less 36.2 kcal/Hr or less
Flatbed - 38.7 kcal/Hr or less - 43.0kcal/Hr or less
Power saving 5.2 kcal/Hr or less
Power OFF 0.86 kcal/Hr or less
Shipping weight (*3) 6.5 kg (14.33 lb) 13.0 kg (28.66 lb) 6.5 kg (14.33 lb) 13.0 kg (28.66 lb)
Appendix
Appendix
Glossary
Introduction
Index
Contents
194
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
*1: The depth excludes the ADF paper chute and stacker.
*2: The required installation space is a reference for scanning A4 size documents.
*3: Includes the package weight.
Appendix
Appendix
Glossary
Introduction
Index
Contents
195
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
The outer dimensions are as follows:
fi-6130Z/fi-6140Z
Unit: mm (in.)
fi-6230Z/fi-6240Z
Unit: mm (in.)
A.3 Outer Dimensions
301
(11.85)
160
(6.30)
327
(12.87)
158
(6.22)
220
(8.66)
301
(11.85)
567
(22.32)
633
(24.92)
229
(9.02)
291
(11.45)
Appendix
Appendix
Glossary
Introduction
Index
Contents
196
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
For details about purchasing the scanner options and more information, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
A.4 Scanner Options
Name Model Supported
model
Description
Imprinter FI-614PR fi-6130Z
fi-6140Z
An option imprinter that can print text (e.g. alphabets, numbers) on the back of the
document after scanning.
It can be used to organize your documents by printing a name, date or serial number on
the scanned document.
For more details, refer to the fi-614PR Imprinter Operator's Guide.
Black document pad FI-624BK fi-6230Z
fi-6240Z
An option that enables scanning in black background on the flatbed.
It is available as a document cover with a black document pad, and can be replaced with
the standard document cover that has a white document pad.
It can be used to automatically correct skewed images or accurately detect the size of the
document when scanning with the flatbed.
ScanSnap Carrier Sheet PA03360-
0013
fi-6130Z
fi-6230Z
fi-6140Z
fi-6240Z
Use this option to scan documents larger than A4/Letter size, as well as non-standard size
documents such as photographs and clippings.
When the bundled Carrier Sheet (×1) is too damaged or worn out to be used for scanning,
it can be purchased separately (5 sheets per set).
The Carrier Sheet should be replaced approximately every 500 scans. However, replace it
if damage or dirt is noticeable.
Appendix
Appendix
Glossary
Introduction
Index
Contents
197
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
1Turn on the computer.
2Exit all running software.
3Select the [Start] menu J [Control Panel].
DThe [Control Panel] dialog box appears.
4Select [Uninstall a Program].
DThe [Programs and Features] dialog box appears with a list of the
currently installed software.
5Select a software to uninstall.
zTWAIN driver: [Scanner Utility for Microsoft Windows]
zISIS driver: [ISIS Driver - Fujitsu fi-6x30Z/fi-6x40Z]
zKofax VRS: [Kofax VRS]
zSoftware Operation Panel: [Software Operation Panel]
(Software Operation Panel is installed together with TWAIN driver/
ISIS driver/Kofax VRS)
zError Recovery Guide: [Error Recovery Guide - Fujitsu fi-6x30Z/fi-
6x40Z]
zImage Processing Software Option (Trial): Uninstall by referring to
the Image Processing Software Option User’s Guide.
zScandAll PRO: [Fujitsu ScandAll PRO]
After ScandAll PRO and ScanSnap mode, you can also remove
Scan to Microsoft SharePoint and ABBYY FineReader for
ScanSnap™.
zScanSnap mode: [Fujitsu ScandAll PRO ScanSnap mode Add-in]
zMicrosoft SharePoint: [Scan to Microsoft SharePoint]
zABBYY FineReader for ScanSnap™: [ABBYY FineReader for
ScanSnap(TM)]
zQuickScan Pro: [QuickScan]
zOperating manuals: [fi-Scanner manuals for fi-6x30Z/fi-6x40Z]
zScanner Central Admin Agent: Uninstall by referring to the Scanner
Central Admin 4.0 User’s Guide.
zAdobe® Reader®: [Adobe Reader]
zFUJITSU Scanner USB HotFix: [FUJITSU Scanner USB HotFix]
6Click the [Uninstall] button or the [Uninstall/Change]
button.
7If a confirmation message appears, click [OK] or [Yes].
DThe software is uninstalled.
A.5 Uninstalling the Software
！
！
！Log on as a user with administrator privileges.
The windows that appear and the operations differ by the
operating system that you are using.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
198
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Glossary
A
A4 size
A5 size
A6
A7
A8 size
ADF (Automatic Document
Feeder)
Automatic size/skew detection
B
Blank Page Skip
Brake roller
Brightness
C
Canadian DOC
Carrier Sheet
CCD (Charge-Coupled Device)
Image Sensor
Color balance
D
Default setting
Density
Device Errors
Dither
Double Letter size
dpi (dots per inch)
Driver
Dropout color
Duplex scanning mode
E
Edge Extract
Edge Processing
Eject roller
Energy Star
Error diffusion
F
FCC
Feed roller
Filter
Flatbed
G
Gamma
Grayscale
H
Halftone
I
Image processing
Imprinter
Intelligent Multifeed Function
Interface
Inversion
ISIS
J
Job Separator
L
Landscape
Letter size
M
Moiré patterns
Multi Image
Multifeed
N
Noise removal
O
OCR (Optical Character
Recognition)
Operating environment
Operator panel
Optical sensor
Overscan
P
Paper jam
Paper protection
Patch code
Pick roller
Pick start time
Pixel
Portrait
Pre-pick
R
Resolution
S
SCSI
SCSI ID
Simplex scanning mode
Smoothing
T
Temporary error
Threshold
TÜV
TWAIN
U
Ultrasonic sensor
USB
W
White reference sheet
Z
Zone OCR
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
199
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
A
A4 size
A standard paper size which is 210 × 297 mm (8.27 × 11.7 in.).
A5 size
A standard paper size which is 148 × 210 mm (5.83 × 8.27 in.).
A6
A standard paper size which is 105 × 148 mm (4.13 × 5.83 in.).
A7
A standard paper size which is 74 × 105 mm (2.91 × 4.13 in.).
A8 size
A standard paper size which is 52 × 74 mm (2.05 × 2.91 in.).
ADF (Automatic Document Feeder)
A paper feeding mechanism which allows multiple sheets of documents to be scanned one sheet at a time.
Automatic size/skew detection
End of Page Detection:
Detects the end of the page and scans the length of the document.
Automatic Page Size Detection:
Detects the paper size and outputs the image data in the same size.
Black Background:
Sets the background color to black for scanning.
B
Blank Page Skip
A function that detects and automatically deletes blank (white or black) pages in a batch of documents.
Brake roller
A roller that prevents more than one sheet of documents to be fed into the ADF at once.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
200
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Brightness
Refers to the brightness of a scanned image.
C
Canadian DOC
A standard issued by Industry Canada, a department of the Canadian government, which sets out the technical
requirements relative to the radiated and conducted radio noise emissions from digital apparatus.*******
Carrier Sheet
A transparent plastic sheet designed for scanning documents that are larger than A4/ Letter size.
CCD (Charge-Coupled Device) Image Sensor
A sensor which perceives the light reflected from the document and converts it into digital form. CCD technology is the
basis of high quality image acquisition in scanners, cameras and other devices.
Color balance
The balance of colors in an image.
D
Default setting
(Hardware)
Preset values from the factory.
(Software)
Values set upon installation of software.
Density
Refers to the deepness of a color in an image.
Device Errors
The following are lists of device errors which require troubleshooting by a service engineer.
Dither
The process by which a group of dots is arranged to reproduce the density of grayscale. Grayscale density is reproduced
by configuring preset dot patterns.This method requires less memory compared to multilevel gray.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
201
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Double Letter size
A standard paper size used in the United States and other countries (11 × 17 in.).
dpi (dots per inch)
A measurement of resolution which is used for scanners and printers. Higher dpi indicates better resolution.
Driver
A program specifically designed for operating systems, which enables interaction with a hardware device.
Dropout color
A function which removes a specified color from a scanned image.
Duplex scanning mode
A mode for scanning both sides of the document at once. (Ù simplex scanning mode)
E
Edge Extract
A function which traces the boundaries between black and white areas, and extracts them as outlines.
Edge Processing
A function which decreases the density of bright colors (except for white) around black areas. Increasing the value for this
function removes dotted image noise and also produces “softened” images.
Eject roller
Rollers that feed documents from the ADF onto the stacker.
Energy Star
ENERGY STAR is an international standard for energy-efficient electronic equipment which was established by the US
Environmental Protection Agency (EPA) in 1992. The standard program has now been adopted by countries around the
world.
Error diffusion
Method of halftone (pseudo-grayscale) image processing which is based on black & white pixel binarization. It sums the
optical density of a pixel and its adjacent pixels, then relocates black pixels in the order of density to minimize the difference
between scanned and output images. By diffusing the errors onto other pixels, the density data of adjacent pixels can be
binarized. This function suppresses moire patterns of dotted halftone images such as newspapers, and reproduces its
grayscale gradation.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
202
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
F
FCC
Acronym for "The Federal Communications Commission", an independent United States government agency which is in
charge of regulating interstate and international communications via radio, television, wire, satellite and cable. The Part 15
of the FCC regulations mentioned in this manual is designed to prevent harmful interferences on radio communication of
radio receivers and other devices which radiate radio frequency energy, and provides for the certification of radio receivers.
It also provides the certification of low power transmitters and the operation of certified transmitters without a license.
Feed roller
A roller that feeds the document through the ADF.
Filter
Refers to the following types of processing on a scanned image.
Digital Endorser:
Adds alphanumeric character strings on the scanned image data.
Page Edge Filler:
Fills in the margins of the scanned image in a specified color.
Flatbed
An input device of the scanner.
Used to scan documents that cannot be scanned in the ADF, such as books and magazines.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
203
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
G
Gamma
A unit which indicates the changes in the brightness of an image. It is expressed as a function of the electric input power to
devices (e.g. scanner, display) and the brightness of the image. If the gamma rate is larger than 1, the brightness of an
image increases and vice versa. Normally, the gamma rate is set to 1 when reproducing the same brightness as the
original.
Grayscale
A method which expresses the gradation (density) from black to white in 256 levels.Suitable for scanning images such as
photographs.
H
Halftone
Reproduces the color density in black & white by using dot patterns. This method is effective for scanning images such as
photographs in black & white.
I
Image processing
Refers to processing and outputting the scanned image via specified scan parameters.
Imprinter
A printer that can print text (e.g. alphabets, numbers) on the back of the scanned document.
It can be use to manage the documents by adding a name, date or serial number on the scanned document.
Intelligent Multifeed Function
A function that excludes certain patterns of overlapping of documents that is detected as multifeed, by letting the scanner
memorize the overlap pattern.
For instance, when there is paper of the same size attached to a designated location on the page, the scanner memorizes
the location of the attachment and can be configured not to detect multifeeds for that location.
Interface
The connection that allows communication between the computer and the scanner.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
204
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Inversion
A scanning method in which the black part and the white part of the image are inverted.
ISIS
ISIS (Image Scanner Interface Specification) is an API (Application Program Interface) standard for imaging devices (e.g.
scanners, digital cameras) which was developed by Captiva, a division of EMC Corporation (the former Pixel Translations)
in 1990. In order to use devices that comply with this standard, it is necessary to install a driver software that supports ISIS
standard.
J
Job Separator
A sheet to insert between documents in a batch for separating different jobs.
The following types of job separators are available:
Job separator with patch codes:
A sheet with patch codes printed.
Job separator with barcodes:
A sheet with barcode(s) printed.
L
Landscape
Orientation in which the short side of the document is set parallel to the feed direction.
Letter size
A standard paper size used in the United States and other countries (8.5 × 11 in.).
M
Moiré patterns
Recurrent patterns on scanned images caused by incorrect settings of angles.
Multi Image
A function which outputs the image in both color/grayscale and black & white at once.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
205
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Multifeed
Multifeed is an error when two or more sheets are fed through the ADF at once. It is also called a multifeed when a different
document length is detected.
N
Noise removal
A function which improves the quality of an image by removing isolated noise that appear as black dots in a white area (or
vice versa).
O
OCR (Optical Character Recognition)
A device or a technology that recognizes the text on documents and converts them into text data that can be edited. The
shape of the characters are recognized by the differences in the light reflected off the documents.
Operating environment
Conditions (e.g. temperature, humidity) required to operate or store the scanner.
Operator panel
A panel that consists of a display and buttons. It is used for scanner operations such as selecting functions and changing
settings.
Optical sensor
A sensor which detects the changes in the amount of light transmission. Paper feeding errors such as multifeed and paper
jam are detected by monitoring the passing of documents.
Overscan
A function that scans the document in a size larger than the specified paper size.
P
Paper jam
Refers to an error in which a document is jammed inside the paper path or feeding is interrupted by documents slipping.
Paper protection
A function that detects anomalies in document feeding and stops the scan.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
206
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Patch code
A special code to let the scanner recognize the start and the end of each job or image mode.
Pick roller
A set of rollers which separates one sheet off the documents loaded in the ADF paper chute, and feeds the document into
the ADF.
Pick start time
The period of time between setting the document and until picking starts after the document passes the hopper empty
sensor.
Pixel
The dots that make up a scanned image.
Portrait
Orientation in which the long side of the document is set parallel to the feed direction. Documents/images are set/displayed
vertically.
Pre-pick
Refers to feeding the document in advance to the position to start scanning.
It shortens the interval between setting the document and feeding the document to the starting position.
R
Resolution
A measurement to indicate the quality (fineness) or an image. Resolution is displayed by the number of pixels within an
inch. Since image data is a collection of small dots (pixels), if the same image contains different amount of pixels, the one
with more pixels can express greater details. Therefore, the higher the resolution, the finer the image becomes.
S
SCSI
SCSI (Small Computer System Interface) is a standard for interfaces, used to connect devices such as hard disks and
scanners. Up to seven devices can be connected by this interface (daisy chain). The data transfer rate is 10 MB/sec. at
maximum for Fast SCSI, and 20 MB/sec. at maximum for Wide SCSI.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
207
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
SCSI ID
Used to specify a particular SCSI device when the initiator selects a target or the target reconnects to the initiator.
Simplex scanning mode
A mode for scanning only one side (front or back) of the document.(Ù duplex scanning mode)
Smoothing
Refers to the removal of irregularities on diagonal lines and curves, which is a processing method commonly used in OCR
applications.
T
Temporary error
An error that can be fixed by the operator.
Threshold
The value which is used to determine whether a certain color is black or white. Threshold value must be configured in order
to scan images with grayscale gradation. Each pixel is converted into black or white according to the specified value.
TÜV
TWAIN (Technology Without Any Interesting Name) is an API (Application Program Interface) standard for imaging devices
(e.g. scanners, digital cameras) developed by TWAIN Working Group. In order to use devices that comply with this
standard, it is necessary to install a driver software that supports TWAIN standard.
TWAIN
An institution that controls products for conformity with various standards related to security, usability and environmental
issues.
U
Ultrasonic sensor
A sensor that detects multifeed errors by ultrasonic soundwave. It detects multifeeds by monitoring the difference in the
amount of ultrasonic waves transmitted through the documents.
Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
208
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
USB
USB (Universal Serial Bus) is a standard for interfaces used to connect devices such as keyboards and scanners. Up to
127 devices can be connected by this interface. It can be connected and disconnected without powering off the devices.
For USB 2.0, the data transfer rate is 1.5 Mbps in Low-Speed, 12 Mbps in Full-Speed, and a maximum of 480 Mbps in Hi-
Speed mode.
For USB 1.1, the data transfer rate is 1.5 Mbps in Low-Speed and 12 Mbps in Full Speed mode.
W
White reference sheet
The white part located inside the ADF which the scanner defines as white, in order to adjust the brightness of all other areas
accordingly.
Z
Zone OCR
A function which performs text recognition on the specified area of the scanned image.
Index
Appendix
Glossary
Introduction
Index
Contents
TOP
209
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
A
ADF
cleaning........................................................... 111, 112
loading documents ..................................................... 38
open/close.................................................................. 24
ADF paper chute setup................................................... 26
automatic page size detection........................................ 49
B
basic flow of scanning operation .................................... 32
before you contact the scanner service provider.......... 149
black document pad ..................................................... 196
brake roller.................................................................... 119
C
Carrier Sheet ................................................................ 196
cleaning
ADF (with Cleaning Paper) ...................................... 111
ADF (with cloth)........................................................ 112
Carrier Sheet............................................................ 116
flatbed ...................................................................... 115
inside........................................................................ 111
outside...................................................................... 110
cleaning materials......................................................... 109
configuring the scan settings.......................................... 51
consumables ................................................................ 118
conventions ...................................................................... 5
customizing the scanner settings ................................. 101
D
daily care ...................................................................... 108
documents for scanning ................................................. 41
E
error indications............................................................ 126
F
flatbed
cleaning.................................................................... 115
loading documents..................................................... 40
open/close.................................................................. 25
H
how to use this manual..................................................... 2
I
image scanning application ............................................ 35
imprinter ....................................................................... 196
introduction....................................................................... 3
ISIS driver....................................................................... 56
L
loading documents .................................................. 37, 39
long page scanning ........................................................ 76
Index
Appendix
Glossary
Introduction
Index
Contents
TOP
210
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
M
main features.................................................................. 15
manual feeding............................................................... 90
mixed batch scanning..................................................... 47
multifeed detection ....................................................... 180
O
operational settings ...................................................... 152
operator panel ................................................................ 64
outer dimensions .......................................................... 195
P
page counter................................................................. 166
paper jam...................................................................... 125
pick roller ...................................................................... 121
post-scan operations and handling................................. 91
power saving mode ........................................................ 31
product label................................................................. 151
R
replacement cycles....................................................... 118
replacing consumables................................................. 117
S
[Scan/Stop] button........................................................ 101
scanner
options...................................................................... 196
parts and functions..................................................... 16
power on/off ............................................................... 23
Scanner Central Admin .................................................. 36
scanning
advanced scanning .................................................... 82
documents of different types and sizes...................... 68
ways of scanning........................................................ 67
[Send to] button ............................................................ 101
Software Operation Panel ............................................ 153
configuration items................................................... 160
Document check area specification for Multifeed
Detection .......................................................... 182
Dropout color............................................................ 173
Feed Mode............................................................... 179
Intelligent Multifeed Function ................................... 185
Manual-feed timeout ................................................ 186
Number of paper feeding retries .............................. 175
Offset/Vertical magnification Adjustment ................. 169
Page Edge Filler....................................................... 171
Paper Protection ...................................................... 177
password.................................................................. 154
Power SW Control.................................................... 188
specifications
basic specification.................................................... 190
documents.................................................................. 41
scanner installation .................................................. 193
stacker setup .................................................................. 27
T
troubleshooting.................................................... 124, 130
TWAIN driver.................................................................. 52
U
uninstalling software..................................................... 197
W
waiting time .................................................................. 186
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
fi-6130Z/fi-6230Z/fi-6140Z/fi-6240Z Image Scanner
Operator's Guide
P3PC-3342-01ENZ0
Issue date: June 2011
Issued by: PFU LIMITED
zThe contents of this manual are subject to change without notice.
zPFU LIMITED is not liable whatsoever for any damages resulting from the use of this scanner and procedures
described in this manual, profit loss due to defects, and any claims by a third party.
zCopying of the contents of this manual in whole or in part and copying of the scanner applications is prohibited under
the copyright.

Navigation menu