Fujitsu Fi 6670A Users Manual P3PC 2252 02ENZ0

2015-01-25

• How to Use This Manual
• Introduction
• Regulatory Information
• Conventions
• Precautions
• Safety Information
• Contents
• Chapter 1 Scanner Overview
  • 1.1 Features
    • Features
  • 1.2 Scanner Parts and Their Functions
    • fi-6670/fi-6670A (ADF Type)
    • fi-6770/fi-6770A/fi-6750S (Flatbed Type)
    • Model-Common Parts
  • 1.3 Functions of the Operator Panels
    • Operator Panel
    • Indications on the Function Number Display
  • 1.4 Turning the Scanner ON and OFF
    • Turning the Scanner ON
    • Turning the Scanner OFF
  • 1.5 Power Save Mode
    • Returning from Power Save Mode
  • 1.6 Basic Flows of Scanning Documents
• Chapter 2 Loading Documents
  • 2.1 Loading Documents on the ADF
  • 2.2 ADF-Loaded Documents
    • Sizes
    • Paper Quality
    • Maximum Document Loading Capacity
    • Area Not to be Perforated
    • Loading Documents with Tabs or Non-Rectangular Documents
    • Multifeed Detection Conditions
    • Limiting the Background Color Area
    • Job Separation Sheet
  • 2.3 Changing the ADF Position (Flatbed Type Only)
  • 2.4 Loading Documents on the Flatbed (Flatbed Type Only)
• Chapter 3 How to Use ScandAll PRO
  • 3.1 Overview of ScandAll PRO
  • 3.2 Launching ScandAll PRO
  • 3.3 Selecting a Scanner Driver
  • 3.4 Selecting a Scanner Model
  • 3.5 Scan Parameters
  • 3.6 Scanning Approaches
    • Scanning with [Scan]
    • Scanning with [Batch Scan]
  • 3.7 Scanning with [Scan]
  • 3.8 Scanning with [Batch Scan]
    • Creating and Editing Profiles
    • Scanning Documents
• Chapter 4 Scan Parameters
  • 4.1 FUJITSU TWAIN 32 Scanner Driver
    • Resolution
    • Scan Type
    • Paper Size
    • Image Mode
    • [Scan] Button
    • [Preview] Button
    • [Close]/[OK] Button
    • [Reset] Button
    • [Help] Button
    • [About] Button
    • [Option] Button
    • [Advance] Button
    • [Config] Button
  • 4.2 FUJITSU ISIS Scanner Driver
    • [Main] Tab
    • [Layout] Tab
    • [Image Processing] Tab
    • [Paper Handling] Tab
    • [Gamma] Tab
    • [Color Dropout] Tab
    • [Blank Page Deletion] Tab
    • [Compression] Tab
    • [Imprinter] Tab
    • [About] Tab
• Chapter 5 Various Documents
  • 5.1 Summary
  • 5.2 Scanning Documents of Different Types or Sizes
    • Scanning Both Sides of A Document (fi-6670/fi-6670A/fi-6770/fi-6770A Only)
    • Scanning A Large-Size Document or Book (Flatbed Type Only)
    • Scanning Documents of Different Widths
    • Scanning A Document Longer Than A3 Size
  • 5.3 Advanced Scanning
    • Excluding Color(s) from Images (Dropout Color)
    • Skipping Blank Pages
    • Removing Punch Holes from A Scanned Image
    • Scanning A Document from the ADF in Manual Loading Mode
    • Duplex Scanning Using the ADF Virtual Duplex Function (fi-6750S Only)
  • 5.4 Setting Post-Scan Operations and Handling
    • Automatically Correcting Skewed Document Images
    • Setting Auto Correction for Document Page Orientations
    • Saving Scanned Images in PDF Format
    • Dividing Multipage Documents Using Patch Codes
    • Dividing a Multipage Document Using Barcodes
    • Horizontally Splitting a Scanned Image into Two
    • Outputting in Multi-Image Mode
    • Setting Auto Detection for Content Colors (Color/ Monochrome)
  • 5.5 Customizing the Hardware Settings
    • Using the Scanner Buttons to Start A Scan Quickly
    • Detecting Multifeeds
    • Bypassing Multifeed Detection for a Fixed Format
• Chapter 6 Daily Care
  • 6.1 Cleaning Materials and Locations Requiring Cleaning
    • Cleaning Materials
    • Locations to Clean and Cleaning Frequency
  • 6.2 Cleaning the ADF
    • Cleaning with a Cloth Moistened with Cleaner F1
  • 6.3 Cleaning the Flatbed (Flatbed Type Only)
• Chapter 7 Consumables
  • 7.1 Consumables and the Replacement Cycles
  • 7.2 Replacing the Pick Rollers
  • 7.3 Replacing the Brake Roller
• Chapter 8 Troubleshooting
  • 8.1 Paper Jams
  • 8.2 Errors Indicated on the Operator Panel
    • Temporary Errors
    • Device Errors
  • 8.3 Troubleshooting
    • Scanner cannot be turned on.
    • Indication on Function Number Display goes out.
    • Scanning does not start.
    • Quality of scanned pictures or photos is not satisfactory when scanning in black and white.
    • Quality of scanned text or lines is unsatisfactory.
    • Images are distorted or blurred.
    • Vertical lines appear in scanned images.
    • Function Number Display indicates an error code (alphabetical letter plus number) alternately after the scanner is turned ON.
    • Multifeed errors occur frequently.
    • Pickup errors occur frequently.
    • Paper jams occur frequently.
    • Scanned images are elongated when scanned from the ADF.
    • There is a shadow on leading edge of scanned image.
    • The scanner is not recognized by your computer when Kofax VRS is used.
  • 8.4 Before Contacting Your Dealer or Scanner Service Provider
    • General Details
    • Troubles
  • 8.5 Checking Labels on the Scanner
    • Positions of Labels on the Scanner
• Chapter 9 Operational Settings
  • 9.1 Starting Up the Software Operation Panel
  • 9.2 Configurable Items
    • Device Setting
    • Device Setting 2
  • 9.3 Settings Related to Consumables and Useful Life Counters
    • Confirming and Resetting the Counters
    • Cycle for Cleaning the Scanner [Cleaning Cycle]
    • Cycle for Replacing the Consumables [Useful life counter]
  • 9.4 Settings Related to Scanning
    • Adjusting the Starting Position for Scanning [Offset/Vertical Magnification Adjustment]
    • Eliminating Shadows or Stripes on the Scanned Image Edge [Page Edge Filler]
    • Scanning with Particular Color(s) Dropped Out [Dropout color]
    • Shorting the Scanning Intervals [Pre-Pick]
    • Cropping the Image Boundary [AutoCrop Boundary]
    • Configuring the Data Transfer Width [SCSI Bus Width]
    • Scan Setting for Documents with Tabs or Non- Rectangular Documents [Scan Setting for Documents with Tab (Automatic Paper Size Detection)]
    • Scan Setting for The Document Whose One Side Is in Dark Background Color [Scan Setting for Document in Dark Background Color]
    • Adjusting the Scanned Document Output Images [Overcrop/Undercrop]
    • Adjusting the Paper Picking Pressure [Pick Pressure]
  • 9.5 Settings Related to Multifeed Detection
    • Multifeed Detection
    • Specifying the Multifeed Detection Range [Document Check Area Specification for Multifeed Detection]
    • Setting A Non-Multifeed-Detection Range [Intelligent Multifeed Function]
  • 9.6 Settings Related to Wait Time
    • Timeout for Manual Feeding [Manual-feed timeout]
    • Setting the Wait Time in Power Saving Mode [Power saving]
  • 9.7 Settings Related to Power ON/OFF Control
    • Power ON/OFF Control [Power SW Control]
• Appendix
  • A.1 Basic Specification
  • A.2 Installation Specification
  • A.3 Outer Dimensions
    • ADF type
    • Flatbed type
  • A.4 Scanner Options
  • A.5 Uninstalling the Software
• Glossary
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • H
  • I
  • L
  • O
  • P
  • R
  • S
  • T
  • U
  • V