Fujitsu Fmc 16Fx Family Users Manual Ug 960011 10 ADA ETHERNET V11
ADA-16FX ug-960011-10-ADA-16FX-ETHERNET-V11
2015-01-25
: Fujitsu Fujitsu-Fmc-16Fx-Family-Users-Manual-218871 fujitsu-fmc-16fx-family-users-manual-218871 fujitsu pdf
Open the PDF directly: View PDF 
.
Page Count: 14
| Download | |
| Open PDF In Browser | View PDF |
Fujitsu Microelectronics Europe User Guide FMEMCU-UG-960011-10 F²MC-16FX FAMILY ADAPTER BOARD ADA-16FX-ETHERNET USER GUIDE ADA-16FX-ETHERNET Revision History Revision History Date 11.01.2008 Issue V1.0, TKi, First Release This document contains 14 pages. UG-960011-10 -2- © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the ADA-16FX-ETHERNET Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the ADA-16FX-ETHERNET Board and all its deliverables are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer’s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its supplier’s liability are restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH -3- UG-960011-10 ADA-16FX-ETHERNET Chapter 1 Contents 1 Contents REVISION HISTORY ............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 1 CONTENTS...................................................................................................................... 4 2 OVERVIEW...................................................................................................................... 5 2.1 Abstract................................................................................................................... 5 2.2 Features of adapter board ADA-16FX-ETHERNET v1.1 ......................................... 5 2.3 Features supported by base board SK-16FX-EUROSCOPE (SK-16FX-100PMC) .. 5 3 INSTALLATION ............................................................................................................... 6 3.1 Jumper settings of ADA-16FX-ETHERNET v1.1 ..................................................... 7 4 JUMPERS AND LED’S .................................................................................................... 8 4.1 Chip select (JP: 1, 2, 3) ........................................................................................... 8 4.2 Ethernet jack Select (JP: 4, 5) ................................................................................. 8 4.3 Link LED, Activity LED (LINK, ACT) ........................................................................ 9 5 CONNECTORS.............................................................................................................. 10 5.1 Ethernet connector (X1) ........................................................................................ 10 5.2 Edge Connectors (X2, X3, X11) ............................................................................ 10 6 SILK-PLOT OF THE BOARD ........................................................................................ 11 7 RELATED PRODUCTS ................................................................................................. 12 8 INFORMATION IN THE WWW....................................................................................... 13 UG-960011-10 -4- © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 2 Overview 2 Overview 2.1 Abstract The ADA-16FX-ETHERNET is an adapter board that can be used together with the evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET extends the evaluation board with Ethernet connectivity. It can be used for software development and testing. The board allows the designer immediately to start with the software development before a final target system is available. 2.2 < Features of adapter board ADA-16FX-ETHERNET 10BaseT Ethernet connectivity < Software example including openTCP stack is available < Multiplexed bus interface < Selectable chip select via Jumper < Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board (Note: SK-16FX-EUROSCOPE has to be ordered separately) 2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC) < 1x UART-Transceiver (SUB-D9 connector) < 1x USB to serial converter (Type-B connector) < 1x High-speed CAN-Transceiver (SUB-D9 connector) < 2x LED-Display (7-Segment) < 2x User-button < 1x Reset-button, Reset-LED < All 100 pins routed to pin-header < On-board 5V and 3V voltage regulators, Power-LED < USB power-supply (external power supply possible) This board must only be used for test applications in an evaluation laboratory environment. © Fujitsu Microelectronics Europe GmbH -5- UG-960011-10 ADA-16FX-ETHERNET Chapter 3 Installation 3 Installation Remove carefully the board from the shipping box and check for any damages. Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB and external power supply. Select the correct Voltage supply: ADA-16FX-ETHERNET is designed for 5V power supply. Jumper JP10 (5V/3V3) Setting Description 1-2 VCC is set to 5V (ADA-16FX-ETHERNET) 2-3 VCC is set to 3.3V Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to face to the outer edge. Ethernet jack Note: Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET. UG-960011-10 -6- © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 3 Installation 3.1 Jumper settings of ADA-16FX-ETHERNET The following jumper settings are set by default: Jumper Description / Function Type Default JP1 Use chip select line 2 solder JP 2pol. Closed JP2 Use chip select line 3 solder JP 2pol. Open JP3 Use chip select line 4 solder JP 2pol. Open JP4 Select center tap A of Ethernet jack solder JP 3pol. 1-2 JP5 Select center tap B of Ethernet jack solder JP 3pol. 1-2 Please refer to the documentation of the evaluation board for detailed information about the jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC). © Fujitsu Microelectronics Europe GmbH -7- UG-960011-10 ADA-16FX-ETHERNET Chapter 4 Jumpers and LED’s 4 Jumpers and LED’s This chapter describes all jumpers that can be modified and all LED’s on the adapter board. The default setting is shown with a grey shaded area. 4.1 Chip select (JP: 1, 2, 3) One out of the three chip select signals CS2, CS3 or CS4 can be selected: JP1, JP2, JP3 connect chip select signal of MCU to chip select signal of Ethernet chip Jumper JP1 (CS2) JP2 (CS3) JP3 (CS4) Setting Description ON (closed) CS2 is connected to CHIPSEL of CS8900A OFF (open) CS2 is not connected ON (closed) CS3 is connected to CHIPSEL of CS8900A OFF (open) CS3 is not connected ON (closed) CS4 is connected to CHIPSEL of CS8900A OFF (open) CS4 is not connected Default: JP1 is closed By default, the chip select signal CS2 of the MB96F348HS is connected to the Ethernet chip. 4.2 Ethernet jack select (JP: 4, 5) The board layout is designed to be used with different Ethernet jacks. JP4, JP5 Select center tap pin of Ethernet jack Jumper JP4 (AVss) JP5 (AVcc) Setting Description 1-2 Capacitor 9 is connected to pin 4 of the Ethernet jack 2-3 Capacitor 9 is connected to pin 7 of the Ethernet jack 1-2 Capacitor 10 is connected to pin 5 of the Ethernet jack 2-3 Capacitor 10 is connected to pin 8 of the Ethernet jack Default: JP4 and JP5 are set to 1-2 By default the pins 4 and 5 of the assembled Ethernet jack are used as center tap pin. This setting depends on the type and manufacturer of the used Ethernet jack (see chapter 5.1). UG-960011-10 -8- © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 4 Jumpers and LED’s 4.3 Link LED, Activity LED (LINK, ACT) These LEDs display the status of the Ethernet interface. LED Colour Description LINK Green Indicates that a link is established ACT Yellow Indicates activity on the Ethernet By default the LINK LED should light directly after connected to a network. © Fujitsu Microelectronics Europe GmbH -9- UG-960011-10 ADA-16FX-ETHERNET Chapter 5 Connectors 5 Connectors 5.1 Ethernet connector (X1) This is the Ethernet jack for connecting the ADA-16FX-ETHERNET to the Ethernet. The connector complies with the 10BaseT standard. The used connector has integrated transformers for transmit and receive lines. The Ethernet jack and the Ethernet controller depends on the power supply voltage: Supply Voltage Used jack Ethernet Chip Adapter Board Rx Transitions Tx Transitions 5V Halo HFJ111043E CS8900CQZ ADA-16FXETHERNET 1:1 1:1.41 3V3 Halo HFJ111041E CS8900CQ3Z - 1:1 1:2.5 5.2 Edge Connectors (X2, X3, X11) The edge connectors are assembled on the bottom side of the adapter board. They are used to attach the ADA-16FX-ETHERNET adapter board to the SK-16FX-EUROSCOPE (SK16FX-100PMC) evaluation board. All used signals are provided by the edge connectors. Connector MCU Pins X2 (1 – 20) 1 – 20 X3 (71 – 100) 71 – 100 X11 (51 – 70) 51 – 70 The adapter board is powered via the edge connectors. UG-960011-10 - 10 - © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 6 Silk-Plot of the Board 6 Silk-Plot of the Board X2 Ethernet connector X1 X3 Latch Cirrus CS8900A Latch X11 © Fujitsu Microelectronics Europe GmbH - 11 - UG-960011-10 ADA-16FX-ETHERNET Chapter 7 Related Products 7 Related Products < SK-16FX-EUROSCOPE Evaluation board with MB96F348HS FPT-100P-M20 package < ADA-16FX-ETHERNET Adapterboard for SK-16FX-EUROSCOPE (SK-16FX-100PMC) < MB96F348HS MB96340 Series Flash MCU UG-960011-10 - 12 - © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 8 Information in the WWW 8 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16-, and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics/linears/ Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw/ For more information about FUJITSU MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics/ © Fujitsu Microelectronics Europe GmbH - 13 - UG-960011-10 ADA-16FX-ETHERNET Chapter 8 Information in the WWW Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a D-63225 Langen Germany UG-960011-10 - 14 - © Fujitsu Microelectronics Europe GmbH
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 14 Create Date : 2008:01:11 15:56:44-01:00 Creator : PScript5.dll Version 5.2 Producer : Jaws PDF Creator v3.4.1834 Author : HWECH@FME04873 Title : Microsoft Word - ug-960011-10-ADA-16FX-ETHERNET-V11.docEXIF Metadata provided by EXIF.tools