Fujitsu FTR K3L WG Series
User Manual: Fujitsu FTR-K3L-WG Series Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
FTR-K1 SERIES POWER RELAY 1 POLE - 25A - Latching relay FTR-K3L-WG Series n FEATURES 1 pole, 25A 2 coils latching type l 1 Form A l Contact gap 1.5mm 2.5kV surge breakdown voltage Compliance with European photovoltaic standard (VDE0126) l High insulation in small package (between coil and contact) - Insulation distance: Clearance > 6.4mm Creepage > 9.5mm - Dielectric strength: 5,000VAC - Surge strength: 8,500V l Flammability UL94V-0 (plastics) l RoHS compliant Please see page 6 for more information Contains no lead and features cadmium-free contacts l l n PARTNUMBER INFORMATION [Example] FTR-K3L A (a) (b) B (c) 012 (d) W - WG (e) (f ) (a) Relay type FTR-K3L : FTR-K3L-Series (b) Contact configuration A : 1 form A (c) Coil type B : Standard sensitive (900mW) (d) Coil rated voltage 012 : 5.....24 VDC Coil rating table at page 3 (e) Contact material W : Silver alloy (f) Version WG : Contact gap 1.5mm Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K3LAB012W-WG Actual marking: K3LAB012W-WG 1 FTR-K1 SERIES FTR-K3L-WG SERIES n SPECIFICATION Item Contact Data Life FTR-K3L-WG Configuration 1 form A (contact gap 1.5mm) Material Silver alloy Resistance (initial) Max. 100mΩ at 1A, 6VDC Contact rating 25A / 250VAC (resistive) Max. carrying current 30A Max. switching power 6,250VA Max. switching voltage 250VAC Max. switching current 25A Min. switching load (reference) 100mA, 5VDC Mechanical Min. 1 x 106 operations Electrical Coil Data Timing Data Insulation 25A, 250VAC, 100 x 103 operations Inductive 25A, 250VAC (cosφ 0.8), 30 x 103 operations Inductive (overload) 37.5A, 250VAC (cosφ 0.8), 50 operations Rated power (at 20 °C) 900mW Operating temperature range (no frost) -40 °C to +85 °C Set (at nominal voltage) Max. 20ms (without bounce, without diode) Reset (at nominal voltage) Max. 20ms (without bounce, without diode) Coil excitation time (at nominal voltage) Min. 30ms, max. 1,000ms Contact gap Min. 1.5 mm Resistance Min. 1,000MΩ at 500VDC Dielectric strength Surge strength Other Resistive Open contacts 2,500VAC, 1min. Coil and contacts 5,000VAC, 1min. Coil to contacts 8,500V/ 1.2 x 50μs standard wave Creepage 6.4mm Clearance 9.5mm Vibration resistance Shock resistance Weight Misoperation 10 to 55Hz double amplitude 1.5 mm Endurance 10 to 55Hz double amplitude 1.5 mm Misoperation Min. 200m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Approximately 25 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1 SERIES FTR-K3L-WG SERIES COIL RATING n Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Set Voltage (VDC)* Must Reset Voltage (VDC) * Max. Set/Reset Voltage (VDC) 005 5 P 28 +4.0 - 9.0 S 28 - +4.0 P 40 +5.4 - S 40 - +5.4 P 160 +9.6 - S 160 - +9.6 P 640 +19.2 - S 640 - +19.2 006 012 024 6 12 24 Note: All values in the tables are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n Rated Power (mW) 10.8 21.6 900 43.2 P: Set coil S: Reset coil SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) 25A, 277VAC (resistive, at 60°C) CSA 22.2 No.14 (by cULus) VDE IEC61810-1 25A, 250VAC, (cosφ=1) at 60ºC 3 FTR-K1 SERIES FTR-K3L-WG SERIES n CHARACTERISTIC DATA The graphs are based on measurement data and are typical values. Electrical life tests (resistive load) 4 FTR-K1 SERIES FTR-K3L-WG SERIES n DIMENSIONS l Dimensions l Schematics P: Set coil S: Reset coil Contacts drawn in reset condition. To operate (set), apply (+) to pin 5 and (-) to pin 2. To release (reset), apply (+) to pin 5 and (-) to pin 1. l PC board mounting hole layout (BOTTOM VIEW) 5 FTR-K1 SERIES FTR-K3L-WG SERIES RoHS Compliance and Lead Free Information 1. General Information l l l l All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives. As per Annex III of directive 2011/65/EU. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Condition l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder Condition: Pre-heating: Soldering: maximum 120˚C within 9 sec. dip within 5 sec. at 255˚C ± 5˚C solder bath Relay must be cooled by air immediately after soldering Solder by Soldering Iron: Soldering Iron Temperature: Duration: 30-60W maximum 350-360˚C maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 6 FTR-K1 SERIES FTR-K3L-WG SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2013 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 22, 2013 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2013:08:22 15:57:01+02:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2013:09:06 08:22:27-07:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:624b2ebd-2ccf-4290-81d0-d3f164b2c245 Original Document ID : adobe:docid:indd:1c5e4c24-011f-11df-b670-cba7dd43a155 Document ID : xmp.id:53AAF2B3320BE3119BA1DAB68C192C00 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:52AAF2B3320BE3119BA1DAB68C192C00 Derived From Document ID : xmp.did:52AAF2B3320BE3119BA1DAB68C192C00 Derived From Original Document ID: adobe:docid:indd:1c5e4c24-011f-11df-b670-cba7dd43a155 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:08:22 15:57:01+02:00 Metadata Date : 2013:09:06 08:22:27-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 7EXIF Metadata provided by EXIF.tools