Fujitsu JV KS Series

User Manual: Fujitsu JV-KS Series Datasheet - Fujitsu United States

Open the PDF directly: View PDF PDF.
Page Count: 8

1
FTR-K1 SERIES
n FEATURES
l UL, CSA, VDE, SEMKO, CQC recognized
l UL class B (130°C) wire class
l Low prole and space saving
- Height: 12.5 mm
- Mounting space: 175 mm2
l High sensitivity in small package
- Operating power: 0.112 to 0.13 W
- Nominal power: 0.2 to 0.3 W
l High insulation with reinforced insulation system
(between coil and contacts)
- Insulation distance: 8 mm
- Dielectric strength: 5,000 VAC
- Surge strength: 10,000 V
l Plastic materials
- UL94 ame class V-0 -UL CTI level class 2
l Plastic sealed type, RTIII
l RoHS compliant.
Please see page 7 for more information
Note: Actual marking omits the hyphen (-) of (*)
POWER RELAY
1 POLE - 5A/10A Medium Load Control
JV Series
n PARTNUMBER INFORMATION
JV - 12 S - K T
[Example] (a) (*) (b) (c) (d) (e)
(a) Relay type JV : JV-Series
(b) Coil rated voltage 12 : 3.....48 VDC
Coil rating table at page 3
(c) Coil type Nil : Standard type (300mW) (not for -KS type)
S : High sensitive type (200mW) (-KS type: 250mW)
(d) Enclosure K : Plastic sealed type, RTIII
(f) Construction T : High density mounting type
S : High power type 10A
2
FTR-K1 SERIES
n SPECIFICATION
* Minimum switching loads mentioned above are reference values. Please perform the conrmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
JV SERIES
Item Standard type High sensitive
type High power type
JV - ( ) JV - ( ) S JV- ( ) - KS
Contact Data Conguration 1 form A (SPST-NO)
Construction Single
Material Silver alloy AgNi + Au AgSnO2 + Au
Resistance (Initial) Max. 70 mΩ at 6 VDC, 1 A
Contact rating 5A, 250VAC / 30VDC (resistive load) 10A, 250VAC /
24VDC
Max. carrying current 5A 10A
Max. switching voltage 250VAC / 150 VDC
Max. switching power 1,250VA / 150W 2,500VA / 240W
Max. switching current 5A 10A
Min. switching load * 100 mA, 5 VDC
Life Mechanical Min. 5 x 106 operations
Electrical Min. 100 x 103 operations Min. 50 x 103
operations
Coil Data Rated power (at 20 °C) 300mW 200mW 250mW
Operate power (at 20 °C) 130mW 113mW 145mW
Operating temperature range -40 °C to +70 °C (no frost) -40 °C to +85°C
(no frost)
Timing Data Operate (at nominal voltage) Max. 8 ms (without bounce)
Release (at nominal voltage) Max. 4 ms (no diode)
Insulation Resistance (initial) Min 1,000MΩ at 500VDC
Dielectric strength Open contacts 750VAC, 1 min.
Contacts to coil 5,000VAC, 1 min.
Surge strength Coil to contacts 10,000V / 1.2 x 50µs standard wave
Other Vibration resistance Misoperation 10 to 55Hz double amplitude 1.65 mm
Endurance 10 to 55Hz double amplitude 5 mm
Shock Misoperation Min. 100m/s² (11 ± 1ms)
Endurance Min. 1,000m/s² (6 ± 1ms)
Weight Approximately 4.3 g
Sealing Plastic sealed RTIII
3
FTR-K1 SERIES
n COIL RATING
JV SERIES
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must Release
Voltage
(VDC) *
Rated Power
(mW)
3 3 30 1.98 0.15
300 mW
5 5 83.3 3.3 0.25
6 6 120 3.96 0.3
9 9 270 5.94 0.45
12 12 480 7.9 0.6
24 24 1,920 15.8 1.2
48 48 7,680 31.7 2.4
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must Release
Voltage
(VDC) *
Rated Power
(mW)
3 3 45 2.25 0.15
200 mW
5 5 125 3.75 0.25
6 6 180 4.5 0.3
9 9 405 6.75 0.45
12 12 720 9 0.6
18 18 1,620 13.5 0.9
24 24 2,880 18 1.2
Standard type (300 mW)
High sensitive type (200 mW)
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must Release
Voltage
(VDC) *
Rated Power
(mW)
3 3 36 2.1 0.3
250 mW
5 5 100 3.5 0.5
6 6 144 4.2 0.6
9 9 324 6.3 0.9
12 12 576 8.4 1.2
18 18 1,296 12.6 1.8
24 24 2,304 14.9 2.4
10A High power type (250 mW)
Note: All values in the tables are valid for 20°C and zero contact current.
* Specied operate values are valid for pulse wave voltage.
4
FTR-K1 SERIES
JV SERIES
Type Compliance Contact rating
UL UL 508, UL 873
E56140
Flammability: UL 94-V0 (plastics)
5A, 250 VAC / 30 VDC (resistive)
1/8 HP, 125VAC/250VAC
Pilot duty: C300CSA C22.2 No. 14
LR 35579
VDE 0435, 0631, 0700
40016247
5A, 250VAC (cosφ1), 100K
2A, 250VAC (cos φ0.4), 100K
5A, 30VDC (omsec), 100K
10A, 250VAC (cosφ1), JV-KS, 25K
10A, 30VDC (0msec), JV-KS, 100K
n SAFETY STANDARDS
Also complies with SEMKO, CQC.
Please contact sales ofce when SEMKO, CQC logo marking is neccessary on the cover.
n CHARACTERISTIC DATA
5
FTR-K1 SERIES
JV SERIES
6
FTR-K1 SERIES
JV SERIES
n DIMENSIONS
JV-KT type + JV-( )S-KS
Unit: mm
l Dimensions l Schematics
(BOTTOM VIEW)
l PC board mounting
hole layout
(BOTTOM VIEW)
7
FTR-K1 SERIES
JV SERIES
1. General Information
l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including
amendments.
l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l Recommended solder Sn-3.0Ag-0.5Cu.
RoHS Compliance and Lead Free Information
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
We highly recommend that you conrm your actual solder conditions
Flow Solder condition:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.
8
FTR-K1 SERIES
Fujitsu Components International Headquarter Ofces
JV SERIES
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2012 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
Fujitsu Components Europe B.V. and afliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and afliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or tness for particular use,
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. April 25, 2012

Navigation menu