Fulcrum ML26 Wireless Remote Control LED Wall Sconce User Manual WRC Sconce Instructions
Fulcrum Products, Inc. Wireless Remote Control LED Wall Sconce WRC Sconce Instructions
Fulcrum >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2523723 |
| Application ID | E8FK7zc8YJB2SOPOI5549w== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.94kB (824252 bits) |
| Date Submitted | 2015-02-04 00:00:00 |
| Date Available | 2015-02-04 00:00:00 |
| Creation Date | 2015-01-16 15:16:58 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2015-01-16 15:16:58 |
| Document Title | WRC Sconce Instructions |
| Document Creator | Adobe Illustrator CC 2014 (Macintosh) |
Wireless Remote Wall Sconce Operating Instructions located in different rooms, different closets, or even on different floors of the house if desired. We recommend choosing the desired location for the lights and testing the operation of the system before commencing the actual installation. Locate the lights where they are most needed without regard for physical barriers and test by turning them on and off several times. You may occasionally experience a slight delay in one or more lights. This is normal. Although we have made every effort to synchronize the operation of these lights, external conditions may cause a slight delay and on rare occasions the lights may not turn on or off. If this happens, simply turn the lights off and then on again. If it happens repeatedly, there may be external factors that are disrupting the signal and the location of the light may need to be altered. Once the final location of the lights has been determined, please remove the battery cover and follow steps below to mount the light. Battery Installation & Replacement 1) Remove the battery cover by depressing the tab on the back of the sconce as shown in the diagram. push to open 2) Install 3 AA batteries making certain to match the polarity as shown in the diagram in the battery compartment. 3) Do not mix battery types. Use only fresh batteries. Alkaline are recommended. Please note: For optimal performance we recommend installing the lights 12” or more apart from each other. 4) Check light operation to confirm that batteries are correctly installed. Mounting Instructions 5) Replace the battery cover. Determine the location of the lights and switch, as noted above, then remove the mounting plate from the switch and the battery cover/mounting plate from the light and follow the steps below to mount them. Operating the Lights Double-sided Tape Mounting: Be certain that the intended mounting surface is clean, dry, and suitable for attachment. Take care to select a location that will not be damaged by the adhesive tape. Remove the protective film and apply the tape to the mounting bracket. Peel off the protective film and press the mounting bracket firmly to the intended surface. You can operate the lights one of two ways: manually or by using a wireless remote control switch, purchased separately.* Manual Operation Screw Mounting – Wood Surfaces: Drill a 1/16” pilot hole, insert the screw and gently tighten it until the mounting plate is secure. Do not over tighten. 1) Press the power button once to turn the light on. 2) Press the power button again to turn it off. 3) To the dim or brighten the light, slide the dimmer switch, located on the bottom front of the light, to the desired level. Screw Mounting – Drywall: Drill a 3/16” pilot hole, insert the drywall anchor and press firmly until it is fully seated into the wall. Insert the screw and gently tighten it until the mounting plate is secure. Do not over tighten. RC System Compatible FCC Statement Use any combination of up to 20 RC compatible lights or switches to solve your lighting problems. Remote Control Switch Operation* (2) this device must accept any interference received, including interference that may cause undesired operation. 1) Press the on symbol I once to turn the lights on. 2) Press the off symbol O once to turn the lights off. Group Code/ DIP Switches Each light and switch comes with 3 DIP switches that enable the user to operate 2 or more groups of lights without interfering with each other. These switches come preset from the factory and will not require adjustment unless: 1) You are adding lights to the group, or 2) You are operating 2 or more groups of lights within 60’ of each other. Adding Lights to Your Group 1) Remove the battery cover. 2) Use a pointed object to gently move the DIP switches to match the settings on the switch. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by The switch positions turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: on the light should match the switch • Reorient or relocate the radio or TV antenna. positions on the switch 3) Check operation by pressing the switch on and off. 4) Replace the battery cover. 5) Repeat the process with all of the remaining lights in the group. • Increase the separation between the lights and the radio or TV. • Consult the dealer or an experienced radio/TV technician for help. Limited 1 Year Warranty This product is guaranteed against defect and workmanship for a period of 1 year from the date of purchase. If the product fails during normal use, please return it to the place of purchase together with a copy of the sales receipt. Alternatively, you may contact us at info@fulcrumproducts.com and we will arrange to have the product replaced or repaired at our discretion. WARNING: Modifications to this or other products by anyone other than an authorized repair agent may Adding Switches to Your Group void that product's warranty. 1) Simply follow the instructions above and arrange the 3 DIP switches to match the code of the group to which you are adding lights. Specifications Model # 30031-308 2) We do not recommend groups in excess of 20 lights and switches (total combined). Installing additional Lights The chief benefit of using 433Mhz radio frequency control is that it works through most common barriers (walls, clothing, shelving, etc.) and so does not require line of sight operation as is the case with infrared systems.Therefore you can choose a switch location that is most convenient for you to operate the system. You can locate the lights where they are needed most without concern for the barriers that might exist. This provides the user with enormous flexibility. Lights can be *Associated Model Reference – # 30019-308 Wireless Remote Control Switch Operating Mode: 433MHz radio frequency control Operating Distance: 60’ LED Type: 4 SMD Lumens: 55 lumens (per light) Color Temp: 4000 Kelvin (warm white) Battery Type: AA(x3), alkaline recommended Battery Life (constant run time): approx. 30 hours Included Items Double-sided adhesive tape • Screws & drywall anchors Operating Instructions CAUTION Do not mix battery types Use only fresh batteries for reliable operation Do not look directly into the light Battery Standby Life: approx. 6 months, actual battery life will vary according to frequency of use. Fulcrum Products, Inc. • info@fulcrumproducts.com • 503-274-1227
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Format : application/pdf Title : WRC Sconce Instructions Metadata Date : 2015:01:16 15:16:58-08:00 Modify Date : 2015:01:16 15:16:58-08:00 Create Date : 2015:01:16 15:16:58-08:00 Creator Tool : Adobe Illustrator CC 2014 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 124 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6518 bytes, use -b option to extract) Instance ID : uuid:3622110e-1320-cd45-892a-3a0d96f1e37e Document ID : xmp.did:a0c7c767-da03-4c28-a556-0b8e8e611085 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:e7c24c42-f8ca-134d-9bb5-29f622a49cd1 Derived From Document ID : xmp.did:07dcacde-f3a2-4b7a-a3db-8f72f946a6f3 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:F77F117407206811818C85DF6A1A75C3, xmp.iid:5693B6DE74206811994CBC7E0C660DC8, xmp.iid:a0c7c767-da03-4c28-a556-0b8e8e611085 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:27 14:40:42-07:00, 2010:12:03 15:09:02-08:00, 2015:01:16 15:16:55-08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CC 2014 (Macintosh) History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference Manifest Reference File Path : /saves/fulcrum/WIRELESS INSTRUCTIONS/ML26rf_2014-11-07.jpg Manifest Reference Document ID : 0 Manifest Reference Instance ID : uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b Ingredients File Path : /saves/fulcrum/WIRELESS INSTRUCTIONS/ML26rf_2014-11-07.jpg Ingredients Document ID : 0 Ingredients Instance ID : uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 11.000000 Max Page Size H : 11.500000 Max Page Size Unit : Inches Font Name : HelveticaLTStd-LightCond, HelveticaLTStd-BoldCond, MyriadPro-Regular, NewsGothicStd-Bold, UniversLTStd-Cn, UniversLTStd-CnObl, UniversLTStd-BoldCn Font Family : Helvetica LT Std, Helvetica LT Std, Myriad Pro, News Gothic Std, Univers LT Std, Univers LT Std, Univers LT Std Font Face : Light Condensed, Bold Condensed, Regular, Bold, 57 Condensed, 57 Condensed Oblique, 67 Bold Condensed Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.031;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970, Version 2.020;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970, Version 2.020;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970, Version 2.020;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970 Font Composite : False, False, False, False, False, False, False Font File Name : HelveticaLTStd LightCond.otf, HelveticaLTStd BoldCond.otf, MyriadPro Regular.otf, NewsGothicStd Bold.otf, UniversLTStd Cn.otf, UniversLTStd CnObl.otf, UniversLTStd BoldCn.otf Plate Names : Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 11.00 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Craig Marocco, Bounding Box : -63 -958 2480 278 Container Version : 9 Creator Version : 18EXIF Metadata provided by EXIF.tools