Funpower General Technology FT1211R DC Motor Controller User Manual remote user s manualx

Shenzhen Funpower General Technology Co., Ltd. DC Motor Controller remote user s manualx

UserManual.wiki >

Funpower General Technology >

FT1211R User Manual HTML Version

User Manual

USER’SMANUAL

FCC Warning:

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:

(1)thisdevicemaynotcauseharmfulinterference,and

(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause

undesiredoperation.

Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould

voidtheuser'sauthoritytooperatetheequipment.

NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital

device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable

protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,

usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe

instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisno

guaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes

causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning

theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor

moreofthefollowingmeasures:

‐‐Reorientorrelocatethereceivingantenna.

‐‐Increasetheseparationbetweentheequipmentandreceiver.

‐‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris

connected.

‐‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.



1. MainFunctionDescription

Theremotecontrollerhasseveralcontrolfunction,itcancontroltheceilingfansystemto

on/offlight,runorstoprotate,changetherotatespeedandsoon.Itincludeseveraltypeof

keys:

(1).ceilingfanon/offorrundirectionfunctionkey(1key)

(2).lampfunctionkey(1key)

(3).ceilingfanspeedfunctionkey(5keys)

(4).ceilingfanrundirectionkeyorstopkey(1key)

(5).ceilingfantimingstopfunctionkey(3keys)

(6).Ledindicatorforpowerandsignal

(7).12vbattery



2. KeyFunctionDescription

2.1State specifies

Stop state: Ceiling fan motor in a stopped state , the blade is static

Run state: Ceiling fan motor in running state, the blade in a rotating state.

2.2Remote controller operating instructions

Remote control function generally includes ceiling fans stop and run, speed gear, lamp

switch, ceiling fans timing stop, and other functions. Specific as follows:

A. Ceiling fan stop or run (Fan on/off key)

This button is only affect fan motor run or stop, will not affect the light status.

In stop state, press this button will start the fan blade rotation, speed when finally

reach to the last setting speed.

In run state, press this button will make the fan blades stop running.

B. Ceiling fan gear switch(number keys)

These buttons are only affect fan motor run or stop, will not affect the light status.

In stop state, press these keys (five or six buttons), fan motor start rotate, and speed

will maintain in the corresponding gear speed.

In running state, press these keys, the fan speed can directly adjust to the

corresponding gear. The smaller the value of gear, such as 1, the speed is lower, the

greater the value, the higher the speed.

C. Ceiling fan timing stop (timing stop keys)

These buttons are only affect fan motor start or stop, will not affect the light status.

There are three key regularly, respectively time 1 hour, 2 hours, 4 hours, or some

other time, the identification shall prevail. They will only has function in the case of a

ceiling fan running ,in stop state, pressing these buttons have response, but no

corresponding function.

If in the case of ceiling fans is in stop state, press the timing button, and then press

any other key, ceiling fans will start, and automatic cancel the timing stop function.

Under the running status, press timing keys, and then press stop button again, the fan

stops and timing stop function cancel.

In running state, press timing stop key, then press gear keys or FF/FR key, does not

affect the timing stop function, ceiling fans will stop after corresponding time.

In running state, if you press timing stop key several times, the timing time will start

based the last press time.

D. Ceiling fan FF/FR rotate (FF/FR key)

This button is only affect fan motor start or stop, will not affect the light status.

In stop state, press this button to start the ceiling fans directly. The direction is in the

opposite direction, and the speed is maintain the previous speed .

In running state, press this button will make the fan reversal

E. Lamp on/off (lamp on/off key)

This button only affects the light of lamp, does not affect the state of the ceiling fan.

That pressing this button will control the lights on or off by turns or process a dimming

function.

Funpower General Technology FT1211R DC Motor Controller User Manual remote user s manualx

Shenzhen Funpower General Technology Co., Ltd. DC Motor Controller remote user s manualx

User Manual

Navigation menu

Namespaces

Views

Navigation