Furrion DV30 Wall Mount Stereo User Manual FURRION DV3100

Furrion Ltd Wall Mount Stereo FURRION DV3100

User manual

4x25W RMS200x110.5 190xmm6NTSC/PAL/AUTO(optional)Audioreceiver
18191919191920202020212121212222222223232324242525252930313334251811141517
7. To play an audio file from a external Bluetooth device(mobile phone) on the wall mount Stereo8.To setup your Stereo using (1) Turn on the NFC function of your mobile phone and m(2) With the NFC detection area of NFC(only support mobile phone with NFC function)ake sure the screen is active and unlocked.your phone touch with the NFC detection area of the Stereo, you can connect or disconnect your mobile phone with the Stereo conveniently. Note: For the first time pair and connect, it will ask you to input a password. The password is “0000”.5.1 Incoming call ringing, short press TEL button on the remote control or 1 button on the front panel to accept the call.(1) Short press TEL button on the remote control or 1 button on the front panel, it will show last phone number on the LCD, then it will execute the dialing.(2) Short press REDIAL button on the remote control, it will dial the last phone number.5.2 To reject Incoming call ringing, short press HANG UP button on the remote control the front panel to REJECT the call.or 2 button on 5.3 During a phone call, short press HANG UP button on the remote control the front panel to end the call.or 2 button on Note: During other modes(execpt Bluetooth conversation), press BT MODE button on the front panel to switch the mode with others.Note: When an incoming call is present the caller’s phone number will be displayed on the screen. (with mobile phone) or receiving a call, the car audio will temporarily wake up.After the device has been paired successfully and Wall mount Stereo screen displaysLINK OKIf your mobile device supports A2DP you will then be able to stream music fromyour Bluetooth device so it can be played by stereo speaker.You must select on your mobile Bluetooth device to play the audio through Bluetooth.If your mobile device supports AVRCP then you will be able to control the basic phone audio output functions by the Wall mount Stereo controls. Eg.Play Pause.Bluetooth with NFC functionAuxiliary inputs on front and rearUSB input with charging function2 zone multi room audio output2 x RCA audio/video outputs for connecting 2 additional TVs1 x subwoofer outputClockterminated with an insulated end to avoid wires shorting or earthing whichDo not attempt to disassemble or adjust this product, contact a service centerfor assistance.
4Fig.1 Fig.2 Fig.3AB+ side upcorrectcorrectwrongwrongwipe it off before using.,Note: Press BT MODE button on the front panel to switch between Unit and Phoneduring BT phone conversation.mobileShort press CLEAR button to cancel the wrongly input number if necessaryShort press TEL button to execute the dialing.result in injury or fire.
30PREVIOUS BUTTON/CLEAR BUTTON9AV IN MODE BUTTONUP BUTTONNEXT BUTTONRIGHT BUTTONDOWN BUTTONAM/FM RADIO MODE BUTTONRANDOM BUTTONREPEAT BUTTONLEFT BUTTONPROGRAM BUTTON
1.6 Locations and Names of the Controls1. DISC SLOT2. IR REMOTE CONTROL SENSOR3. 1/2/3 BUTTON 1 TEL /REDIAL BUTTON 2 HANG UP BUTTON4.ZONE A/B BUTTON5. 6.PLAY/PAUSE BUTTON RADIO REGION SELECT BUTTON7.POWER BUTTON8.STOP BUTTON9.AUX IN SOCKET10.HEADPHONE SOCKET11. USB SOCKET12.BT MODE BUTTON/EQ BUTTON13.MICROPHONE IN14.RESET BUTTON15.INPUT MODE BUTTON16.5/RANDOM BUTTON17.VOL KNOB/SEL BUTTON18.6/TITLE BUTTON19.4/REPEAT BUTTON20.LCD DISPLAY21.EJECT BUTTON22.NFC DETECTION AREA78 9 10 11 14 15 16 171821243519RESETAB123RPT4 RDM5 TITLE6ZONEVOLUMEAUX USB12 13122206/ BUTTONthe relative content of SYSTEM SETUP menu for details.
28HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 5.17.5 SPEAKER SETUP DOWNMIXIt is for selecting your desired sound effect when there is no center speakerand subwoofer. There are 3 modes: LT/RT, STEREO, VSS.LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect.STEREO: If you choose the item, when outputting audio signal with 5.1 channels, it will output the left and right channels of signal ; when outputting audio signal with 2 channels, it will output the common 2 channels of stereo signal. VSS: If you choose the item, when playing a disc recorded with 5.1 channels, the main channel speakers can output audio signal with VSS effect. 5.17.6 DIGITAL SETUP DYNAMIC RANGE After selecting the compression mode of LINE OUT, set the item, so you canadjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peakvalue of the audio signal is the minimum; if you set it to be OFF, the Peak-to-Peak value is the maximum. DUAL MONO It is for selecting a desired audio output mode for the left and right ways of signal.It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:STEREO, MONO L, MONO R, MIX MONO.CONTRAST It is for adjusting the contrast of the video outputDescription of icons on the LCD display1.USB icon After inserting a USB storage, USB icon is lit.2.DVD icon After inserting a DVD disc, DVD icon is lit.3.DISC icon After inserting a disc(DVD,VCD,CD), DISC icon is lit.4.MP3 icon If a disc or a USB storage contains MP3 format files, MP3 icon is lit.5.RDM icon In random playback mode, RDM icon is lit.6.MONO icon In mono audio mode, MONO icon is lit.7.STEREO In stereo audio mode, STEREO icon is lit.8. ZONE <1> icon When selecting the ZONE A speakers, ZONE <1> icon is lit.9.ZONE <2> icon When selecting the ZONE B speakers, ZONE <2> icon is lit.10. FOLDER icon If a USB storage contains more than 2 folders(contains playback file), FOLDER icon is lit.11.PLAYBACK icon During disc or USB playback state, PLAYBACK icon is lit.12.PAUSE icon During disc or USB pause playback state, PAUSE icon is lit.13.MUTE icon When the Stereo is on mute state, MUTE icon is lit.14. BLUETOOTH icon When the Stereo is paired and connected successfully, icon is lit.15.FLAT icon When selecting flat audio mode playback, FLAT icon is lit.16.ROCK icon When selecting rock audio mode playback, ROCK icon is lit.17.CLASSIC icon When selecting classic audio mode playback, CLASSIC icon is lit.18.CINEMA icon When selecting cinema audio mode playback, CINEMA icon is lit.19.LOUD icon When selecting loud audio mode playback, LOUD icon is lit.20.RPT icon In repeat playback mode, RPT icon is lit. BLUETOOTH
27an audio language.Press MUTE button on the remote control to mute the audio, will flash in the display. Press MUTE again to cancel.“MUTE” Press MODE button repeatedly to select Tuner,Disc(After disc),USB(After inserting a USB storage), BT,AV IN and AUX mode.INPUT inserting a Press EQ button to select between CINEMA,ROCK CLASSIC,FLAT.Press and hold CLOCK button on the remote control to enter CLOCK Setup, rotate VOL KNOB to adjust hour. Press it brieflyto minute setting and rotate it to adjust. Once time is set,the unitwill automatically set after a few seconds.Press and hold LOUD button on the remote control to turn onor off LOUD mode.Press ZONE A or B button to select speaker output, “ZONE <1>” or “ZONE <2>” will displayon the LCD once it is selected.RESET
269For the DVD System Menu, there are 6 setup pages in all. They display as follows: 5.17.1 SYSTEM SETUP TV TYPE The setup item is for matching TV screen size. 4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the left and right parts of the video will be cut out, and display in full screen. 4:3 LB: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the top and bottom parts of the TV screen will be turned into a black square respectively. 16:9: Choose the item when connecting a TV set with 16:9 wide screen.PASSWORD This setup item is for locking or unlocking the rating level of the Parental Control.The defaulted state is locked. The defaulted password is 0000. You can set a new password that you like: Select the PASSWORD item and then press the > button to enter it, then input the original password 0000, and then press the OK button to unlock it. Press the > button to enter it again, then input a new password that you like and then press the OK button to make it effective. Before the other persons see the Manual, you should get the password in mind and cut out the part of PASSWORD in the Manual. RATING The item is for setting a new rating level of the Parental Control. 1. Select the PASSWORD item and then press the > button to enter it, then input the password mentioned above, and then press the OK button to unlock the setting of the rating level of the Parental Control. 2. Select the RATING item and then press the > button to enter it, then use the direction buttons to select your desired rating level, then press the OK button to confirm.3. Select the PASSWORD item again and then press the > button to enter it, then input the password, and then press the OK button to lock the new setting of the rating level of the Parental Control. DEFAULT This item is for making all setup items change back to original status. TV SYSTEM The Stereo supports output of various TV system.If your TV has only NTSC or PAL system, the screen will blink and become colorless when a wrong TV system is selected. In this case go to TV SYSTEM and select NTSC, PAL or AUTO to match the system of your TV.Press and hold PLAY/PAUSE button for 5 secondsset AM/FM radio region(Europe/USA1/USA2) to Press or button to move radio one step at a time.frequence down or up Press and hold or button search the next strongest station to automatically.Press and hold INPUT MODE button on the front panel briefly pressselect between FM1,FM2.FM3,AM1,AM2.or AM/FM button on the remote control toPress and hold APS button on the remote control to store the six strongest station in the 18 FM stations and 12 AM stations can be stored)automatically current band.(Up toBriefly Press APS button on the remote control to scan presets 1-6 in the current band.Press LOC button on the remote control to turn on/off LOC.In FM mode,press ST button on the remote control to select the Stereo or Mono sound mode.Area FrequencySelectionStoring and RecallingStation PresetsStereo/Mono
25 103. During JPEG playback, press one of the direction buttons to change the angle of viewing picture that is displaying as follows: >: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press PROG button on the remote control to change the mode of During JPEG playback, press STOP button to stop playing and return menu. * During JPEG playback, the following buttons are not available: SLOW-FWD, SUBT, TITLE/PBC, ANGLE, STEP, AUDIO, RDM and A-B. * In JPEG mode,the other operations are same as ones in MP3/WMA mode. 5.14 MP4 Operation1. The root menu is displayed on TV when beginning to switch on DISC mode, then it will automatically play the first file. During playback, press STOP button to stop playing and return to the root menu. 2. When displaying the root menu, press the direction buttons to select your desired FOLDER or file, then press OK or PLAY/PAUSE button to open the FOLDER, or selected file. When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file. * ANGLE, PROG, RDM, and TITLE/PBC buttons are not valid.* The other functions are same as ones in DVD disc; but the “Repeat” function is same one in MP3/WMA.5.15 ESP and ID3 Function There is ESP function for all formats of discs. In MP3/WMA mode, during playback, the information of the file name, folder name, song s title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not.5.16 USB Operation Power on the DVD player, then insert the USB storage, then the monitor will display the root menu of the USB storage 5.17 The DVD System Menu Setup Operation1. Press SETUP button on the remote control to access the DVD System Menu on the monitor. 2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page.4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press OK button to confirm it.* Press the < button to return to the upper level.* Press SETUP button on the remote control again or use the direction buttons to highlight the EXIT SETUP and then press OK button to exit the System Menu.refresh picture. to the root play the as This device support picture(JPG format),audio(MP3 or WMA format) and Video (MP4 format), all the operations are same as ones of the corresponding format. Note:The USB input with charging function ( not all products can be charged from the unit)item of the Press once to pause the playback,press to resume; press twice to stop playback, then press to start playback from the beginning of the first chapter/track. Disc USB OpreationInsert DiscEject DiscTrack Select Fast Forward and BackwardPause PlaybackStop PlaybackRepeat Random TitleWith the label facing up,insert a disc into the disc slot.The disc will automatically begin playback.Press EJECT to eject the disc.Press to temporarily stop the playback.Press again to resume playback. Press RPT to repeat current playing track/chapter. Press RPT to resume.Press RDM to play each track in random order.Press RDM again to resume.In DVD/VCD mode,press TITLE on the remote control to display the title list.BLUETOOTH OPERATION Dial or Accept CallReject or End CallPress the 1 button on the front panel to accept, dial or redial a call.Press the 2 button on the front panel to reject or end a call. Press and hold or button fast backwards or forward.to Press or button to move to previous or next track/chapter.
24115.12 Program Playback It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD disc to play.1 During playback, press PROG button on the remote control to enter a program follows: For DVD discs For VCD/CD discs2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number.3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence.4 Use the direction button to move cursor onto PLAY, then press OK button on the remote control to play the programmed titles/chapters/tracks in programmed only pressing PLAY/PAUSE button also can play the /tracks in programmed order. * To exit program playback, firstly press STOP button, then press button to enter sequence playback; or press PROG button twice again. * To remove the all programmed sequence numbers, move the cursor onto CLEAR, then press OK button on the remote control.* To change the programmed sequence, move the cursor onto the item you want to change, input the desired sequence number.* During VCD playback, if it is in PBC ON mode, at the same time of entering the state of program playback, it turns off PBC mode. 5.13 Playback the Picture CD in JPEG Format 1. The root menu is displayed on the monitor when beginning to switch on DISC mode. At the time, it plays MP3/WMA file.( TITLE or PBC button is not available). In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort icon is for file; the right file sort icon is for file. If one of these 3 file sort does not exist, you can not move cursor onto the file sort icon.2. When displaying the root menu, press the direction buttons to select your desired FOLDER, file or file sort icon, then press OK or PLAY /PAUSE open the FOLDER, or play the selected file, or play only this sort of When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file. When you select a JPEG file sort icon, press one of the direction buttons to first JPEG file, then press the v button to select the desired JPEG file, press OK or PLAY/PAUSE button to display the JPEG picture in full screen from the selected JPEG picture. interface as /MP3/WMAorder; programmed titles/chaptersPLAY/PAUSEVIDEO JPEGbutton to file. select the finally The Description of the Wiring Diagram for Socket A and Socket B1.7 Wiring DiagramWIRING HARNESS PLUG A WIRING HARNESS PLUG BBLACK12WIRING CONNECTING SOCKET AWIRING CONNECTING SOCKET AWIRING CONNECTING SOCKET BWIRING CONNECTING SOCKET B
23 12 ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the direction buttons to select the area you want to enlarge.5.9 Change the Caption Language When playing DVD discs, press SUBT button on the remote control repeatedly the language of the caption or turn off the caption.(depend on the disc used.) When playing VCD/MP3/WMA/CD discs, the button is not available.5.10 Change the Audio Language1. When playing DVD discs, press AUDIO button on the to select the desired language type(depend on the disc used)2. When playing VCD discs, press AUDIO button repeatedly sound mode of the MONO L, MONO R, and Stereo, no language function.3. When playing CD/WMA/MP3 discs, AUDIO button is invalid.5.11 Look over the Playback Status1. When playing DVD discs, press OSD button on the remote to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing title, the serial number of the playing chapter, the elapsed time of the playing chapter, the remaining time of the playing chapter, the elapsed time of the playing title, the remaining time of the playing title, etc.2. When playing VCD/CD discs, press OSD button on the remote to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remaining time of the playing track, the elapsed time of the disc, the remaining time of the disc. to select remote control repeatedly on the remote control to select the on the remote controlcontrolrepeatedlycontrolrepeatedlyWIRING CONNECTING SOCKET A VIEWPURPLEPURPLEPIN NO COLOR FUNCTION 1YELLOW+12V DC MEMORY B+ 2PINKAUTO ANTENNA 3RED+12V DC IGNITION SWITCH 4BLACKPOWER GROUND(-12DC)WIRING CONNECTING SOCKET B VIEW
22135.5 Playback from a specified chapter/track or a specified time 1. When playing DVD discs, press SEARCH button on the remote control to and highlight the title item, then use the number buttons number of the title; use the direction buttons to highlight the then use the number buttons to input the serial number of the press OK or PLAY/PAUSE button to play the selected chapter. 2. When playing VCD/MP3/WMA/CD discs, press SEARCH button an interface and highlight the track item, then use the number the serial number of the track; finally press OK or selected track . 5.6 Playback in Random When playing DVD/VCD(PBC OFF)/MP3/WMA/CD discs, press RDM button to switch between RANDOM ON /RANDOM OFF. When in RANDOM ON mode, it will play in random.5.7 Playback in Different Angle1. When playing VCD/MP3/WMA/CD discs, ANGLE button on the remote control is not available.2. When playing DVD discs, press ANGLE button on the to view in different angle.(This function is only for the DVD discs with ANGLE function)5.8 Playback in Zoom Mode In DVD/VCD mode, during playback, press ZOOM button on the remote control repeatedly with these multiples: display an interface to input the serial chapter item,chapter; finally on the remote control to display buttons to input PLAY/PAUSE button to play the remote control repeatedly to enlarge a certain area of the images on the screenPOWER AND SPEAKER WIRES FROM STEREO CONNECTORWIRES FROM RV,BOAT OR TRUCK
21 14During slow forward, press PLAY/PAUSE button to resume normal playback.The function is only for video. 5.3. Playback with still frame If the unit is currently running DVD.VCD disc,press STEP button on the remote control to display the still frame forward with step by step. Press PLAY/PAUSE button to resume normal playback.5.4 Playback Repeatedly5.4.1 ONE/ALL Repeat1. In the mode of DVD disc playback: Press RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF.2. In the mode of VCD(PBC OFF)/CD disc playback: press RPT button to select REP ONE, REP ALL or OFF. When it is in the state of PBC ON, during VCD disc playing, the RPT button is not available.3. In the mode of MP3/WMA disc playback: Press RPT button to select REP ONE, REP DIR, REP ALL or OFF. 5.4.2 A-B Repeat Press A-B button on the remote control if you want to repeat a specific that you define: 1. Press A-B button at a point (A) where you want it to be the start point of the repeat segment. Press A-B button again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly.2. To cancel A-B repeat mode and resume normal playback, press A-B button for the third time. Note: During DVD/VCD/MP3/WMA/CD playback, points A and B must be within the same track. consecutively segment on a disc 1.8 Mounting Installation Location* Choose a mounting location away from humid areas, water sources, appliances or anyequipment that can radiate heat.* Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure the area behind the wall mount stereo has a vent hole or if it is an enclosed box and has adequate room around the rear of the unit for cooling.* Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed against the heat sinkInstalling the unit.* Before finally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly.*Fix the unit with screw according to following diagram. SCREW SCREWPLASTIC SHELLOF THE FRONT PANEL1. Remove the front panel from the unit.2. Fix the unit with 4 pieces #8 pan head self tapping screw.3. Put back plastic shell of the front panel to the unit.plastic shell of
2015 In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on TV screen if the disc include the PBC menu. 2. Press the number buttons to select your desired track to play. In MP3/WMA mode1. The root menu is displayed on the monitor screen all the time(and the TITLE/ PBC button is not available). 2. Press the direction buttons to select your desired FOLDER, then press OK or button to open the FOLDER, and then press the to select your desired file, finally press OK button to play the selected file. In CD mode, the TITLE/PBC button is disabled.4.7 Terminate the Playback1. Press EJECT button to eject disc.2. Press and hold POWER button on the front panel or briefly press POWER button on the remote control to turn off the Stereo. 5. Advanced Disc, USB Operation5.1 Playback with Speed During normal playback, Press and hold or button on front panel or press and hold button on the remote control repeatedly to fast or at the following speeds: x2, x4, x8,x16, x20, normal. During speed playback, press PLAY/PAUSE button to resume normal playback. 5.2 Playback with Slow Speed During playback , press SLOW_FWD button on the remote control to execute Forward function. With each consecutive pressing of SLOW_FWD button, the playback speed decreases. The speed levels in Slow Forward as follows: x1/2,,x1/3,x1/4,x1/5,x1/6,1/7,normal.PLAY/PAUSE direction buttons the repeatedly / backwards forwards the Slow 2. Common Operation1.Turning On and Off the unit By pressing the power button will turn on or enter standby mode 2.Selecting a Source: 1) Use INPUT MODE button on the front panel. By pressing BT button to enter into the Bluetooth mode directly. Press again to back to current playback mode.) Use the corresponding buttons on the remote control. DVD / USB - once a DVD or USB is inserted into the unit, the unit will automatically switch to display this source menu. Press this function button on the remote control to select DVD if a disk is already inserted and the unit is playing from another source. AM/FM - by pressing this button on the remote control will scroll through the FM1, FM2, FM3, AM1, AM2.To switch this units AM/FM receiver between USA and Europe frequencies p until the region is displayed on the screen. AUX/AV IN-these buttons on the remote control allow you to scroll through the AUX /AV IN inputs fitted to the stereo. AUX - connection on the front of the unit (Audio and Video input function) AV IN - connection on the rear of the unit to connect an external audio source3.Volume Adjust Rotate VOLUME KNOB clockwise to increase volume, rotate anticlockwise to reduce volume.4. Mute Press MUTE button to mute what ever source is playing and display mute on the screen. Press MUTE button again to release unit from mute.5. Clock Set 1) To display the clock on the LCD display, press CLOCK button on the remote control 2) To adjust or set the clock, press and hold CLOCK button on the remote control until the clock set feature is displayed on the LCD display of the stereo then use VOLUME KNOB on the unit or + and - on the remote control to adjust the time, push in the volume knob on the stereo or press SEL button on the remote control to change from setting hours to minutes. Once time is set the stereo will automatically set after a few seconds if not pressing any functions. Press INPUT MODE button repeatedly to select Tuner,Disc(After inserting a disc),USB(After inserting a USB storage), BT,AV IN and AUX mode. Note: 2ress and hold PLAY/PAUSE button for 5 seconds
19 164.2 Pause Playback When playing DVD/VCD/CD/MP4/MP3/WMA discs, press PAUSE button on the front panel or remote control to pause the playback, press button again to resume normal playback. 4.3 Stop Playback When playing DVD/VCD/MP3/WMA/CD discs, press STOP button once to pause the playback, then press the PLAY button to resume the normal playback; press STOP button twice to stop the playback, then press to start playback from the beginning of the first chapter/track. 4.4 Select Chapter/Track with the or button or / Button Press on the front panel remote control during playback to select the previous or next chapter/track playback. Note: or press advance multiple chapters/tracks backward .4.5 Select Chapter/Track with the Number Buttons When playing DVD/VCD(PBC OFF)/MP3/WMA/CD discs, press one of the 1~9 and the 0 number buttons to directly select and play the 1st to 9th track / chapter. If you want to play the track/chapter with serial number bigger than 9, use the 10+, 1~9 and 0 button. For example 1, to play the 13th track/ chapter, firstly press the 10+ button once, then press the 3 button. For example 2, to play the 34th track/chapter, firstly press the 10+ button for 3 times, then press the 4 button. Note: pressing and holding the +10 or -10 buttons will allow you to move up or down 10 tracks at a time(only for MP3/WMA).4.6 Select Chapter/Track with the Root/PBC Menu (If the disc includes the root/PBC menu) When playing DVD discs: 1. Press TITLE button on the remote control to display the title list.2. Press the direction buttons to select your desired title, and then press OK or PLAY/PAUSE button to open the root menu of the selected title.3. Press the direction buttons to select your desired chapter, finally press the OK or button to play the selected chapter. During playback, pressing TITLE button on front panel or long pressing TITLE button on the remote can directly display the root menu of the title that is playing.PLAY/PLAY/PAUSEPLAY/PAUSE button or button or / Buttonon the to Press or button / Buttonmultiple times to or forward PLAY/PAUSE 6. To select a preset EQ mode Press and hold EQ button on the front panel or briefly press EQ button on the remote control to select the preset music equalizer curves: CINEMA, ROCK, CLASSIC, FLAT. The sound effect will be changed. 7. To turn on/off LOUD mode Press and hold LOUD button on the remote control to turn on/off LOUD mode.8.To adjust the sound equalizer curves To adjust the sound equalizer curves, briefly and repeatedly press SEL the remote control to select the sound equalizer curves of VOL, BAS(without TRE (without preset EQ), BAL,BEEP(ON/OFF), then rotate the on the front panel or press the + and - on the remote control to adjust level.9.ZONE A/B BUTTON Pressing ZONE A or B button will turn on or off the audio source in each of the different areas which your speakers are connected. “ZONE <1>” or “ZONE <2>” will display on the LCD once it is selected. 10.Press the button or TITLE button up to the previous menu.11.To reset the unit When the display is incorrect, or the function buttons are not effective or sound is distorted, then use a sharp point to press RESET button, that will make the unit be reset to factory default and re-instate the correct functions. button onpreset EQ), VOL KNOB
184 Basic Disc, USB Operation4.1 Begin playback1. Press POWER button briefly to turn on the DVD player.After turning on the DVD player, please turn on the monitor, and ensure thatthe video output of the monitor is the video input from the DVD playerconnected with the monitor.? Common QuestionQ: There is not anything is displayed on TV screen when the DVD player is turned on. How to solve the problem?A: Ensure that the TV was set to right video input(not TV channel); for example, if you make VIDEO1 INPUT of TV and DVD player connected with each other, then you need set TV to VIDEO1.2. Insert a disc into the DISC SLOT(Label surface up). ! NOTE 1. For some discs that are seriously scratched or poor manufacturing orrecording quality, it may not play.2. If the player can not read disc under normal condition, please try toeject and reload the disc again.3. Remark:1) In addition to normal CD and DVD, this unit supports to play CD-R,CD-R/W, DVD-R and DVD-R/W as well; however, depending on theconditions of the recording equipment, recording program or the discitself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,too high recording speed may result in poor signal quality and therefore,it is recommendable to select as lower as possible recording speed.173. Radio Operation1. FREQUENCY SELECTIn RADIO mode. Press and hold toUSA1 or USA2.2. AM/FM BUTTONIn RADIO mode, pressAM/FM button on the remote control to select your desired radio band of FM1, FM2, FM3,AM1, AM2 , and the selected band will be displayed on the LCD of the front panel.3. TUNE/SEEK UP/DOWNIn RADIO mode: 1) or Press >>| button on the remote control to automatically search down/up for a availablestation from the current frequency.2) Press or button on the front panel or press / button on to manually search up or down with step by step for your desired stationfrequency. 4. APS BUTTONIn RADIO mode:1) When pressing and holding APS button on the remote lowest frequency and checks the signal strength level until 1 And then the 6 strongest stations are preset to the corresponding presetnumber memory bank. The AS operation is implemented in each bank of the selected band.When the AS operation is finished, it will resume broadcastingon the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all)2) When briefly pressing APS button on the remote control, tfrom the M1. When the field strength level is more than radio holds at that preset number for a few seconds with After finishing a circle of searching, it will stop NOTE: In FM band, FM1,FM2,FM3 is checked one at a time. In AM band, AM1, AM2 is checked one at a time.5. PRESET STATION [ 1-6 ] BUTTONSIn RADIO mode:1) To memorize the current frequency on the current band, press and hold any one of the six presetbuttons (1-6) .2) To recall the preset memory on the current band, press one of the preset buttons [1-6] .6. STEREO/MONO BUTTONPress ST button on the remote control to select the STEREO or MONO sound mode forFM band.7. LOC BUTTON1) In RADIO mode, when the signal of the distance radio station are very weak and the receivingeffect is bad during tuning, press LOC button on the remote control to turn off the LOC function,2) In RADIO mode, when the signals from the local radio stations are too strong, this could lead to interference. press LOC button on the remote control to turn on the LOC function, Re-tune for the local station required.PLAY/PAUSE button for about 5 secondsselect your desired frequency EUROPE,press and hold INPUT MODE button on the front panel or briefly Press and hold or button on the front paneland hold |<< / the remote control from the current control, the radio searches from thecycle search is finished.he radio searches for each preset stationthe threshold level of the stop level, the releasing mute, and then searches again. searching on the M1.then tune again for the distance radio station;
FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.ǂ Increase the separation between the equipment and receiver.ǂ Connect the equipment into an outlet on a circuit different from that to which the ǂreceiver is connected. Consult the dealer or an eǂxperienced radio/TV technician for help.

Navigation menu