Furrion FCX48TA 2.4GHz wireless module User Manual OEM Integrators Installations

Download:
Mirror Download [FCC.gov]
Document ID	3776777
Application ID	9WL9lKTLllsStP3Dre6aeA==
Document Description	OEM Integrators Installations User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.51kB (243838 bits)
Date Submitted	2018-03-12 00:00:00
Date Available	2018-03-12 00:00:00
Creation Date	2018-03-08 19:50:57
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-03-08 19:50:57
Document Title	Microsoft Word - 三、Module installation guide-update.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Product: 2.4GHz wireless module Model(s): MR7916A
OEM/Integrators Installations User Manual
Note:
The module is limited to OEM installation ONLY;
The OEM integrator is responsible for ensuring that the end‐user has no manual instructions to
remove or install module.
If the FCC identification number is not visible when the module is installed inside another device, then
the outside of the device into which the module is installed must also display a label referring to the
enclosed module.
This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2ABH3‐FCX48TA”
When the module is installed inside another device, the user manual of this device must contain
below warning statement:
1、This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2、 Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: —Reorient or
relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user's authority to
operate the equipment.
That separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations.
This product is mounted inside of the end product only by professional installers OEM. They use this
module with changing the power and control signal setting by software of end product within the
scope of this application. End user cannot change this setting.
The equipment complies with RF exposure limits. This module is limited to installation in mobile or
fixed applications. The antenna used for this transmitter must not be co‐located or operating in
conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
If the IC identification number is not visible when the module is installed inside another device, then
the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label can use
wording such as the following:
“Contains Transmitter Module IC: 23337‐FCX48TA”
When the module is installed inside another device, the user manual of this device must contain
below warning statements:
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi,
mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
Setup
1.
Connect 3.3V regulate power to the Module 3.3V pin.
2.
Connect GDN to Module GND.
3.
Connect Enable pin to Module REST pin.
4.
Connect Host USB D+/D1 Data line to Module D+/D‐
5.
Connect antenna to Module ANT pin.
Installation diagram is as follows
BOTTOM VIEW
TOP VIEW

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:03:08 19:50:57+08:00
Modify Date                     : 2018:03:08 19:50:57+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - 三、Module installation guide-update.docx
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:4be2ec78-bdc8-4a61-a286-9fbbd7a2e28a
Instance ID                     : uuid:55b81b77-bcb9-4567-a32a-0b436b0ea89a
Page Count                      : 3

EXIF Metadata provided by EXIF.tools