Furuno Fi5002 Users Manual Visio WS200 Direct Connection To NN3D

: Furuno Furuno-Fi5002-Users-Manual-800662 furuno-fi5002-users-manual-800662 furuno pdf

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

WS200 direct connection to NavNet 3D
(NMEA2000 powered through NN3D)

To activate the internal resistor in the
WS200 antenna, insert the supplied
contact pin into socket #5 in the
connector before connecting it to the
antenna.

18 Pin pigtail cable
supplied for use with
Data 2 and 3
000-164-608

NMEA2000 Micro
Double-ended cable
Male – Female
1 meter = 000-167-962
2 meter = 000-167-963
6 meter = 000-167-964

This is to supply voltage for
the NMEA2000 Bus. The
minimum voltage is 9 VDC
and the maximum is 16 VDC.

(1 amp MAX load)
Pink

Data
Port 2
Pin 17

1 amp Fuse
(local supply)

“T” Connector
AIR-052-531
Fem/Fem/Male

NMEA2000
Terminator
Female
AIR-335-792

Light
Green
Data
Port 2
Pin 18

WS200 connection to DRS Dome and NavNet 3D
Inside DRS2D and DRS4D

To activate the internal resistor in the
WS200 antenna, insert the supplied
contact pin into socket #5 in the
connector before connecting it to the
antenna.

Cut the NMEA2000 connector off of
WS200 cable and connect the wires to
the green NMEA2000 connector inside
the DRS2D or DRS4D.
Match the wire colors to the colors shown
in the DRS Connector close-up.

DRS Connector
close-up
1
2
3
4
5
6

Ethernet and power

Use the included 3 hole
gasket for this
installation application.
(See below)

Terminator Resistor
120 Ω
000-167-746
(supplied)

WS200 connection to DRS Gearbox and NavNet 3D

Inside DRS Gearbox
To activate the internal resistor in the
WS200 antenna, insert the supplied
contact pin into socket #5 in the
connector before connecting it to the
antenna.

Cut the NMEA2000 connector off of cable
and connect the wires to the gray
NMEA2000 terminal inside the DRS
Gearbox.
Match the wire colors to the colors shown
in the DRS Connector close-up.

DRS Connector
close-up
Use the included 3 hole
gasket for this
installation application.
(See below)

Ethernet

Terminator Resistor
120 Ω
000-167-746
(supplied)

WS200 connection to FI5002 with FI504 and NavNet 3D

NMEA2000 6 meter
Drop cable
000-166-945
(supplied w/ FI-504)

NMEA2000 Micro cable
1 meter = 000-167-965
2 meter = 000-167-966
6 meter = 000-167-966

Cut NMEA2000 connector off of
cable and connect the wires to one
of the 6 drop ports inside the
FI-5002.
Match the wire colors to the colors
shown on the drop connector.

Set both Terminal Resistor jumpers to
ON to use the FI5002 as the
NMEA2000 backbone

Appropriate fuse
or circuit breaker

FI-5002 Junction Box
Drop
connector

This is to supply voltage for
the NMEA2000 Bus. The
minimum voltage is 9 VDC
and the maximum is 16 VDC.
1

2

3

4

5

WS200 connection to NavNet 3D
(external NMEA2000 power source)
To activate the internal resistor in the
WS200 antenna, insert the supplied
contact pin into socket #5 in the
connector before connecting it to the
antenna.

NMEA2000 Micro Doubleended cable
Male – Female
1 meter = 000-167-962
2 meter = 000-167-963
6 meter = 000-167-964

“T” Connector
AIR-052-531
Fem/Fem/Male

This is to supply voltage for
the NMEA2000 Bus. The
minimum voltage is 9 VDC
and the maximum is 16 VDC.

Appropriate fuse
or circuit breaker

NMEA2000
Terminator
Female
AIR-335-792
NMEA2000 Micro Doubleended cable
Male – Female
1 meter = 000-167-962
2 meter = 000-167-963
6 meter = 000-167-964

“T” Connector
AIR-052-531
Fem/Fem/Male



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:11:18 09:59:15-08:00
Create Date                     : 2009:06:25 11:45:52-07:00
Metadata Date                   : 2009:11:18 09:59:15-08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Visio-WS200 direct connection to NN3D.vsd
Creator                         : ballard
Document ID                     : uuid:422a1e9c-3192-49a2-add7-6e253907b790
Instance ID                     : uuid:40459aff-75fa-4714-acef-14e13d79eb9a
Producer                        : Acrobat Distiller 7.0 (Windows)
Has XFA                         : No
Page Count                      : 5
Author                          : ballard

EXIF Metadata provided by EXIF.tools