Furuno Fmd3200 Operators Manual FMD 3200_page1
2015-08-11
: Furuno Furuno-Fmd3200-Operators-Manual-800524 furuno-fmd3200-operators-manual-800524 furuno pdf
Open the PDF directly: View PDF .
Page Count: 12
Download | |
Open PDF In Browser | View PDF |
Electronic Chart Display and Information System (ECDIS) English Model Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300 The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's Manual. All brand and product names are trademarks, registered trademarks or service marks of their respective holders. Controls The system can be operated with the controls or the trackball module. The procedures in this operator’s guide use the trackball module. Status LED The color and state of the LED change according to alert status. OFF: Heater on CPU board is on. Green, lighting: Normal operation status; no alerts generated. Red, flashing rapidly: Alert not acknowledged nor rectified. Red, flashing slowly: Alert not acknowledged, but rectified. Red, lighting: SYSTEM FAIL or acknowledged but not rectified alert. A/C RAIN, BRILL knob Rotate: Adjusts the brilliance of A/C SEA knob No use. FURUNO or Hatteland monitor. Push: Selects a color palette. GAIN knob No use. Rotary encoder for VRM Adjusts the active VRM. VRM1, VRM2 Activates, deactivates respective VRM. POWER key Turns the system on or off. (This key may or may not control monitor on/off depending on monitor setting.) USB port (under cover) Connects a USB flash drive. Rotary encoder for EBL Adjusts the active EBL. EBL1, EBL2 Activates, deactivates respective EBL. Trackball module Operates like a PC mouse. VIEW/HIDE key Shows, hides EBLs, Instant Access bar, Overlay/NAV Tools box, VRMs, Route Information box. ALARM ACK key Acknowledges alerts; silences the audio alarm. ACQ/ACT key Activates selected sleeping AIS target. InstantAccess knob Accesses functions on the InstantAccess bar. Rotate: Selects item. Push: Confirms selection. ESC key Goes back one step in current InstantAccess bar operation. TARGET DATA key Displays the detailed target data for selected TT, AIS target. Keyboard A keyboard for entering alphanumeric data. MFD key Toggles operating modes. UNDO key RANGE key Selects a chart Undoes the last operation, when creating a route or user chart. scale. TARGET CANCEL key Sleeps selected activated AIS target. Display Layout Status bar (See page 3.) InstantAccess bar (See page 4.) Chart scale/presentation mode box Cursor position box Sensor information box Upper section Own ship functions box Electronic chart area TC: TC: MANUAL Route information box ROT: Overlay/NAV Tools box TC: ROT: Lower section 152 Wheel Over Line Alert box EBL1 box, EBL2 box Permanent warnings box 2 VRM1 box, VRM2 box 152 Wheel Over Line MANUAL Status Bar Status bar TC: TC: OTHERS: Sets system in standby; plays back data (AMS off). MANUAL PLAN: Selects the Voyage planning mode. CHARTS: Selects the Chart maintenance mode. NAVI: Selects the Voyage navigation mode. Operating mode: Selects an operating mode, ECDIS, Conning or AMS (option). How to open a drop-down list Indicates a drop-down list. Click button Chart priority: Selects which chart type to display, vector or raster, when both are available. Drop-down list STD DISP: Restores IMO standard display. CHART ONLY: Shows only the chart, when left button is pressed and held down. 3 Spinner: Rotates clockwise if the system is working properly. User profiles, Settings menu: Manages user profiles; opens the Setting menu. Time: Time (local or UTC). Displays the operator's manual, ECDIS program no. and system information. Date: Displays the date; selects the time to use, local or UTC. Chart database: Selects the pre-defined presentations of ENC content: IMO BASE, IMO STD or IMO ALL. Instant Access Bar Lower section Upper section (by operating mode) Voyage navigation mode Opens the Message dialog box to manage AIS Safety and NAVTEX messages. Manual Update: Inserts chart update symbols manually. Mini Conning: Shows, hides the mini conning display. Weather Overlay: Shows, hides the weather overlay. Instant Track: Creates temporary track to return to or deviate from monitored route. Chart maintenance mode Select: Opens the Select Route dialog box to select the route to follow. Unselect: Stops following monitored route. Move to Plan: Switches mode to Voyage planning mode to edit route selected. Route INFO: Displays the Route Information dialog box. Instant Track Status: Shows or hides the Track Control Status window. GoAW*, GoSEA*: Activates respective autopilot steering mode. TCS Setting Status Go AW Go SEA * Not shown with Autopilot FAP-2000. AUTO Load: Starts automatic installation of the chart data (CD or DVD ROM). Manage Charts: Manages chart cells (grouping, deleting, etc.). Cell Status: Shows the chart catalog to get info about charts installed in the system. License: Manages chart licenses. Public Key: Manages public keys. Sync Config: Selects ECDIS units to synchronize. Sync Status: Displays sync status; does sync Reconvert: status functions. Reconverts outdated SENC charts to the corresponding current ones. SET: Shows, hides chart features; sets chart alerts. TWO DISP: Splits the screen in two, horizontally or vertically. AIO: Displays Admiralty Information Overlay. Shows, hides software keyboard. Record: Records user/position events to the event log; accesses various logs. Selects a color palette. Voyage planning mode Report: See reports on waypoints and voyage planning related routes and user charts. Route: Creates a route (see page 5). User Chart: Creates a user chart (see page 7). Guide Box: Provides range and bearing information between the last waypoint and the cursor position when creating a route. Manage Data: Deletes, imports routes and user charts; exports routes and route data. 4 Chart Legend: Finds data about current chart. Viewing Dates: Sets “display date” and “approved until” dates. Chart 1: Provides overview of ECDIS chart symbols. MOB: Marks man overboard position. Takes a screenshot. Undoes past action (route, user chart). Adjusts brilliance of FURUNO or Hattelandmonitor. Routes How to create a route Click a position to mark a waypoint. PLAN Plan -ning WPT5 161.4° 353.3NM At last waypoint, right-click and select [Finish]. Delete WPT Finish WPT6 Route WPT1 Click [New]. WPT1 WPT4 201.5° 309.0° 2137.2NM 971.4NM WPT2 106.9° 1748.5NM WPT3 25.8° 1470.2NM Continue entering waypoints. Enter name for route. Click [OK]. Click [Save]. 5 Routes (con’t.) How to select a route to navigate To stop navigating a route: Select NAVI mode; right click [Route]. Select Route Unselect Move to Plan Route INFO Route selected. Click [Select Route]. Select a route. ROT: Click [Open]. How to view route waypoint information Select NAVI mode; right click [Route]. Route Click [Waypoints] tab. Select Route Unselect Move to Plan Route Info Click [Route Info]. ROT: How to delete a route PLAN Manage Data Check route(s) to delete. Route Click [Delete]. Delete 6 NAVI Route Un select User Charts How to create a user chart PLAN Plan -ning User Chart Click [New]. Click object to draw. Tidal: - Predicted - Current How to draw a line Area Line: - Coast - Route - Nav - Depth Circle Clearing Line: - NMT - NLT Label - Label - Point How to draw a circle (1) Click (3) Click (2) Click How to draw an area (2) Click (1) Click (1) Click (4) Right click; select [Finish]. (2) Move cursor; double click. (3) Click Example objects Right click to open options. Enter name for user chart. Click [Save]. Click [Save]. 7 (4) Right click; select [Finish]. User Charts(con’t) How to select objects to display in user chart SET DISP How to link a user chart to a route Symbol DISP PLAN Plan -ning Route selected. Route Click [Select]. Click [Open]. Click [Mariner] tab. Click [User Chart] tab. Click [Save]. Check item(s). Click. UserChart1 UserChart2 UserChart3 Select user chart to link. (Multiple selections possible.) How to delete objects from a user chart Point on a line Circle or area Edit Delete Edit DeletePoint Select [DeletePoint]. Select [Delete]. Right click Right click the point to delete. How to delete user charts PLAN Manage Data User Chart UserChart1 Click [Delete]. Check chart(s) to delete. 8 Click [Save]. Chart Operations How to control visibility of chart objects Basic Setting Control basic chart settings DISP SET Chart DISP Control chart objects Symbol DISP Tick Control navigational features 9 Chart Operations (con’t.) How to set Display date and Approved until dates How to set safety contours and chart alerts DISP SET Chart INFO Chart Alert Viewing Dates Click [Approve All]. Click to select chart alert type: Red ( ): Audio+visual indications Orange ( ): Visual indication Yellow ( ): No indication Set safety contour here. How to find chart object information (ENC chart) NAVI Select an object. Select [Object INFO]. Right click. Right-click Click [OK]. How to manually insert a “new” chart object Click [Planning] tab. NAVI Manual Update Select object from Drawing type. Put cursor on location where to enter object then click. Click [Add]. Click object to add. 10 Click [Commit]. TT/AIS Operations How to find target info Click a target to show its information. Title bar TT No. Bearing Range Course over ground Speed over ground CPA TCPA Bow crossing range Bow crossing time Title bar Scroll buttons TT symbols (main) Symbol (Color) Name Past position (Green) marker (Green) Target under acquisition Acquired (Green) target Click to switch level of detail Scroll buttons MMSI Vessel name AIS symbols (main) Bearing Range Course over ground Speed over ground CPA TCPA Bow crossing range Bow crossing time Position Heading Rate of turn Navigation status Select past position point interval (time). Sets TT/AIS vector time. Selects TT/AIS vector reference. Past position marker Sleeping AIS target Activated AIS (Green) target ABC (ex. TT) Sets CPA and TCPA conditions for TT/AIS CPA/TCPA alarm. Sets conditions for automatic activation of AIS targets whose CPA is within CPA/TCPA setting. 0.5NM 3min AUTO ACT FILT ANT_1 Selects reference for TT/AIS past position display. Name Vector Shows, hides AIS display. Enables, disables TT/AIS CPA/TCPA alarm. Sets TT/AIS lost target alarm conditions. (Green) (Green) How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box Shows, hides TT display. Symbol (Color) ANT_1 Select TT source - radar antenna or TTM data. 11 (ex. AIS) Check to select radar echo source also as TT source. Set reference position in TTM sentence to CCRP or antenna. TT/AIS Operations (con’t) Radar Overlay Open the menu, select TT/AIS Setting and then Setting.1 or Setting.2 as appropriate. Radar echo Activates, deactivates the radar overlay. AIS filter, how to sleep all AIS targets, auto activation of AIS targets by CPA Adjusts the picture gain. Sets the degree of transparency for the overlay. Sets the item to display when a chart object and a radar echo share the same position. Selects the antenna to feed the radar echo data. Status of the radar echo data, “OK” or “No Data”. Filters AIS targets by target category. Filters AIS targets by range, speed. Sleeps all activated AIS targets. Status: OK Alert Icons and Their Meanings Icon Alert state Icon description Alert priority: Alarm Not acknowledged, Not rectified Red triangle with black loudspeaker in center of triangle. Flashing every 0.5 s. Sets the conditions to activate an AIS target when its CPA is within the CPA alarm setting. AIS and TT lost target filters Not acknowledged, Not rectified Red triangle with crossed out black loudspeaker Buzzer temporarily silenced. in center of triangle. Flashing every 0.5 s. Acknowledged, Not rectified Red triangle with black exclamation point in center of triangle. Not acknowledged, Rectified Red triangle with black check mark in center of triangle. Lights 3 s, off 1 s, repeat. Alert priority: Warning Not acknowledged, Not rectified Yellow-orange circle with black loudspeaker in center of circle. Flashing every 0.5 s. Not acknowledged, Not rectified Yellow-orange circle with crossed out black Buzzer temporarily silenced loudspeaker in center of circle. Flashing every 0.5 s. Sets the conditions for the AIS lost target filter. Sets the conditions for the TT lost target filter. Acknowledged, Not rectified Yellow-orange circle with black exclamation point in center of circle. Not acknowledged, Rectified Yellow-orange circle with black check mark in center of circle. Lights 3 s, off 1 s, repeat. Alert priority: Caution Caution 12 Steadily displayed yellow square with black exclamation point in center of square. PUB. NO. OSE-44730-E (1412, DAMI) FMD-3200/3200-BB/3300 00017612714
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:03:11 14:51:11+09:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2014:11:28 15:16:51+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : FMD-3200_page1 Creator Tool : Adobe Illustrator CS6 (Windows) Metadata Date : 2014:11:28 15:16:51+09:00 Thumbnail Width : 256 Thumbnail Height : 180 Thumbnail Format : JPEG Thumbnail Image : (Binary data 27291 bytes, use -b option to extract) Document ID : xmp.did:C7D76423E1A8E3118D339BF4DA10993A Instance ID : uuid:4f51d573-7dae-43f9-86bd-37264077bc61 Rendition Class : proof:pdf Original Document ID : uuid:EB7E15715479E1118C33EE195F2CA20A Derived From Instance ID : uuid:e9be003e-3530-45ef-8578-5ec0172065a1 Derived From Document ID : xmp.did:D067CA9276B8E211B939C3119BE0E839 Derived From Original Document ID: uuid:EB7E15715479E1118C33EE195F2CA20A Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:3127361EEEFAE1119238E1B3EF965390, xmp.iid:C7D76423E1A8E3118D339BF4DA10993A History When : 2012:09:10 11:20:41+09:00, 2014:03:11 14:51:06+09:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 297.038889 Max Page Size H : 209.902778 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 3.00, Version 3.00 Font Composite : False, False Font File Name : ARIAL.TTF, ARIALBD.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 初期設定のスウォッチグループ Swatch Group Type : 0 Swatch Colorant Swatch Name : ホワイト, ブラック, 80% ブラック, 60% ブラック, 40% ブラック, 20% ブラック, レッド M=100 Y=100, 75% レッド M=75 Y=75, 50% レッド M=50 Y=50, 25% レッド M=25 Y=25, グリーン C=80 Y=100, 75% グリーン C=60 Y=75, 50% グリーン C=40 Y=50, 25% グリーン C=20 Y=25, ブルー C=100 M=50, 75% ブルー C=75 M=37.5, 50% ブルー C=50 M=25, 25% ブルー C=25 M=12.5, オレンジ M=50 Y=100, 75% オレンジ M=37.5 Y=75, 50% オレンジ M=25 Y=50, 25% オレンジ M=12.5 Y=25, バイオレット C=50 M=90, 75% バイオレット C=37.5 M=67, 50% バイオレット C=25 M=45 , 25% バイオレット C=12.5 M=22., アジュール C=80, 75% アジュール C=60, 50% アジュール C=40, 25% アジュール C=20, イエロー, 75% イエロー, 50% イエロー, 25% イエロー Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 60.000002, 39.999998, 19.999999, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 50.000000, 37.500000, 25.000000, 12.500000, 90.000004, 67.500001, 44.999999, 22.500002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000 Swatch Colorant Black : 0.000000, 100.000000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Producer : Adobe PDF library 10.01 Page Count : 12EXIF Metadata provided by EXIF.tools