Furuno Fr 1505 Users Manual

FR-1510 MARK-3 to the manual a29a0163-3533-46ef-aee5-8759a94345d3

: Furuno Furuno-Fr-1505-Users-Manual-429003 furuno-fr-1505-users-manual-429003 furuno pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

R

15-INCH MULTI-COLOR
HIGH-PERFORMANCE RADAR
Models FR-1505/1510/1525 MARK-3
■ Daylight-bright 15-inch multi-color,
■
■
■
■
■
■

high-resolution display
Logarithmic amplifier receiver
16-level yellow or green display with day
and night color pallette
Dual EBLs and VRMs, with floating
origin
Head-Up, Course-Up, North-Up or Headup True Bearing and True Motion modes
True or relative echo trails
Two target alarm zones

R

■ 10-target Electronic Plotting Aid (EPA)
with true or relative vectors

■ Two user-programmable function keys
■
■
■
■

for one-touch optimized radar setting
Optional 20-target Auto Plotter ARP-17
(ATA)
Optional Video Plotter RP-17
Optional interface board to provide video
output for external monitor
Optional 42 rpm gearbox available

The future today with FURUNO's electronics technology.

Catalogue No. R-171b

FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Telephone: +81 (0)798 65-2111
Telefax: +81 (0)798 65-4200, 66-4622, 66-4623

TRADE MARK REGISTERED
MARCA REGISTRADA

Advanced video processing techniques to
enhance detection capability on both short
and long ranges
shown on a 15-inch
high-resolution
display
6.5 ft antenna
(4 or 8 ft available)

FR-1505 MARK-3: 6 kW
FR-1510 MARK-3: 12 kW
FR-1525 MARK-3: 25 kW

Complies with the following
regulations and standards

■ IMO Resolutions MSC. 64 (67)
Annex 4

■ IEC 60936-1 Shipborne radar
standard

■ IEC 60945 General
requirements
■ IEC 60872-2 ATA (Optional ARP-17 required)

The FURUNO FR-1505/1510/1525 MARK-3 X-band
radars will reinforce Furuno's long established
tradition of high performance and reliability. They
meet the exacting international and national
performance standards for use on ships requiring a
radar with the display diameter of 180 mm.
The Video Plotter RP-17 is available when Radar
Mapping function is also required.
The 1505/1510/1525 MARK-3 employ advanced
video processing techniques for improved noise
rejection and automatic clutter suppression.
They also feature clearly distinguished target trails
from real targets by different color tones and accurate
plotting, manually or automatically.
Five presentation modes are available: Head-up,
Course-up, North-up, Head-up true bearing and True
Motion with appropriate heading and speed data in
IEC 61162 format.

A wide choice of antenna types is offered to meet the
varying needs of individual installations. A highspeed scanner (42 rpm) is optionally available
instead of standard 24 rpm.
Standard features include dual VRMs/EBLs where
No.1 EBL may be off-centered and has a range
marker on it, true/relative target trails, echo stretch,
two target alarm zones, trackball for direct
range/bearing readout, EPA, quick restart of
transmission in case of accidental power-off, etc.
Two target alarm zones can be set in any sector at a
desired range. Visual and audible warnings are
produced to warn of a target entering the target alarm
zone or preset CPA/TCPA zone.
The standard EPA (Electronic Plotting Aid) permits
you to plot up to 10 targets. For SOLAS Convention
ships, the Auto Plotter ARP-17 (ATA) and Video
Plotter RP-17 are optionally available.

Powerful Standard Features
True or Relative Target Trails
Provided with ship's heading and speed data, the FR-1505/1510/
1525 MARK-3 present true echo trails which permit intuitive
recognition of surrounding situation without smearing of stationary
targets, such as land. Relative echo trails are useful for identifying
a target on a collision course. The echo trails are displayed in
monotone or multilevel shading with a trail length selected between
15 s and 30 min, or continuously.

Radar Plotting Facilities
The new IMO Resolution defines 3 types of radar plotting
facilities: Electronic Plotting Aid (EPA), Automatic Tracking
Aid (ATA) and Automatic Radar Plotting Aid (ARPA).
All these Plotting Aids generate CPA and TCPA and

EPA (Electronic Plotting Aid)

collision alerts, complying with all IMO and IEC standards.
The FR-1505/1510/1525 MARK-3 provide EPA and ATA*.
* with optional ARP-17

Automatic Tracking Aid (ATA)
ARP-17 (Optional)
The Auto Plotter
ARP-17 automatically tracks up to
20 targets
acquired manually
or automatically,
presents target
data, and triggers
a collision alarm
for the target on a
collision course.

Electronic plotting of 10 targets according to the
new IMO and IEC standards. Automatically
redraw vectors between manual plots, drops off
vectors if not plotted more than 10 min as
required by IMO/IEC.

Target acquisition: Automatic or manual acquisition of up to
20 targets in 0.2-32 nm
Tracking range:
0.1-32 nm
Vector length:
0.5, 1, 3, 6, 15, 30 min, true or relative
Audio-visual alarm: Produced against lost targets and threatening
targets
Target data display: Range, bearing, course, speed and CPA/TCPA
of a chosen target
Note: ARP-17 can be used for 24 rpm scanner only.

Video Plotter RP-17
(Optional)

The Video Plotter RP-17 provides radar maps and storage of
navigation events on two IC cards - a memory card (RAM) for storing
the operator-created radar maps and a chart card (ROM) storing
FURUNO made digital charts. The memory card retains operatorcreated radar maps of a maximum of 3,000 points. A radar map is a
combination of map lines and symbols whereby the user can define
and input the navigation data, route planning and monitoring data.
The chart card (ROM) can drive the Electronic Reference Chart
(ERC) - digital chart published by the Japanese Hydrographic
Bureau. Nav lines, coastlines, buoys, etc. produced by operator by
3000 points in Radar mode, 6000 points with 98 waypoints and 10
routes on IC card in Chart mode at intervals of 0-30 s.
Map area:
Latitude limits:
Plot interval:
Memory:

0.125 to 96 nm
85°N to 85°S
0 to 30 s or 0 to 9,99 nm
Chart mode:
6000 points for track points and
marks, 98 waypoints, 10 routes.
Radar map mode: 3000 points

SPECIFICATIONS OF FR-1505/1510/1525 MARK-3
ANTENNA RADIATOR

EQUIPMENT LIST

1. Type
2. Beamwidth
Radiator type
Length
Beamwidth (H)
Beamwidth (V)
3. Rotation Speed
4. Wind load

Standard
1. Display Unit RDP-119 with sun visor (DC or AC)
1 unit
2. Antenna Unit
1 unit
Scanner:
RSB-0074 (24 rpm) or RSB-0075 (42 rpm)
Transceiver: RTR-067 (6 kW), RTR-062 (12 kW) or RTR-063 (25 kW)
3. Antenna Cable 15, 20, 30 m (specify)
1 pc.
4. Standard spare parts and installation materials
1 set
(Specify model number, power supply, antenna type and rpm, and length
of antenna cable when ordering.)
Optional
1. Power Cable CVV-S8x2C 15 m (for DC set)
2. Stepdown transformer RU-1803 (for 440 VAC, 50/60 Hz, 1ø mains)
3. External Alarm Buzzer OP03-21
4. Gyro Interface GC-8 (built-in type)
5. Gyro Converter AD-100
6. Video Plotter RP-17 (built-in type)
7. Auto Plotter ARP-17 (ATA) For 24 rpm scanner only.
8. Performance Monitor PM-30
9. Handgrips
10.Interface Kit for connection of XGA monitor OP03-153

XN24AF
8 ft
0.95°
20°

RF TRANSCEIVER
1. Frequency
2. Output Power

DISPLAY UNIT
1. Picture Tube
15-inch diagonal color CRT
Pixels:
1024 x 768 dots
Effective diameter: 185 mm
Echo color:
Yellow or green echoes in 16 levels
2. Presentation
Head-up, Course-up*, North-up*, Head-up true bearing*,
True motion**
*Heading data required.
**Heading and speed data required.
3. Range Scales and Range Ring Intervals (nm)
Range:
Rings:

0.125, 0.25, 0.5, 0.75, 1.5,
3, 6, 12, 24, 48,
0.025, 0.05, 0.1, 0.25, 0.25, 0.5, 1, 2, 4, 8,

XN12AF: 1250 49.2"
XN20AF: 2060 81.1"
XN24AF: 2570 101.2"

ANTENNA UNIT
RSB-0074/RTR-067/XN12AF:
31 kg 68 lb
RSB-0074/RTR-062/XN20AF:
37 kg 82 lb
RSB-0074/RTR-063/XN24AF:
40 kg 88 lb

(240 9.5")
300 11.8"

470 18.5"

134 5.3" 200 7.9"

DISPLAY UNIT
96
16

4. Minimum Range and discrimination
35 m
5. Accuracy
Range:
1% of range in use or 10 m, whichever is greater
Bearing:
Better than 1°
6. Echo Trails
True or relative echo trails in monotone or multilevel shading (Speed
and heading data required for true echo trails)
Trail length:
15, 30 s, 1, 3, 6, 15, 30 min, or continuous
7. EPA (Electronic Plotting Aid)
Manual plotting of up to 10 targets with auto follow-up, true/rel
vectors with a specified vector length (30 s, 1, 3, 6, 15 or 30 min)
and target data readout (Speed and heading data required for true
vectors.)
8. Interface
Channel 1 Input:
BWC, BWR, DBK, DBS, DBT, DPT, GGA, GLL,
HDG, HDM, MDA, MTW (*), RMA, RMB, RMC,
VBW, VTG, ZDA
Output:
RSD (every 4 s),
TTL (When A/C RAIN control is pressed.)
Channel 2 Input:
DBK, DBS, DPT, MDA, MTW, VBW
Output:
TTM
Channel 3 Input:
HDB, HDM, HDT, VHW
Output:
None
9. Other Features
Automatic tuning, A/C sea/rain, Interference rejection, Second trace
echo suppression, Echo stretch, Heading line off (self-returning),
Two VRMs, Two EBLs with true/rel bearing readout*, EBL/VRM
offset, Instant day/night brilliance setting, Trackball cursor with range
and true/rel bearing* plus L/L** readouts, Parallel index lines, Offcentering (up to 75% of range scale), Quick restart in case of
accidental power-off, Nav data display**, User-definable function
key
*Heading data required for true bearing readout.
**Nav data inputs required.
ENVIRONMENTAL CONDITIONS (Meets IEC 60945)
Temperature:
-25°C to +70°C (Antenna unit)
-15°C to +55°C (Display unit)

4-˘15

4-˘12

29 kg, 64 lb
200 7.9"

4.
5.
6.
7.

412 16.2"
487 19.2"

51 2.0"

611 24.1"
465 18.3"

422 16.6"

3.

9410 ± 30 MHz (X-band)
FR-1505 MARK-3:
6 kW
FR-1510 MARK-3:
12 kW
FR-1525 MARK-3:
25 kW
Pulselengths and Pulse Repetition Rates (PRR)
Range scales (nm) P/L (µs)
PRR (Hz)
0.125, 0.25
0.07
3000
0.5
0.07/0.15
3000
0.75, 1.5
2 from 0.07/0.15/0.3
3000/1500
3
2 from 0.15/0.3/0.5/0.7 3000/1500
6
2 from 0.3/0.5/0.7/1.2 1500/1000
12, 24
2 from 0.5/0.7/1.2
1000/600
48, 96
1.2
600
Mixer and Local Oscillator
Microwave integrated circuit (MIC)
Duplexer
Ferrite circulator with diode limiter
IF
60 MHz, Logarithmic, BW 28/3 MHz
Noise Figure
6 dB

355 14.0"

XN12AF
XN20AF
4 ft
6.5 ft
1.8°
1.23°
25°
20°
24 or 42 rpm
100 knots relative wind

570 22.4"

Slotted waveguide array

INTERCONNECTION DIAGRAM
ANTENNA UNIT

Performance Monitor
PM-30 (option)

DISPLAY UNIT

Gyro Interface
Auto Plotter
ARP-17
Video Plotter
RP-17
Stepdown
Transformer
RU-1803

POWER SUPPLY
12/24/32 VDC, 295 W max,or 115/230 VAC, 50/60 Hz, 1ø, 465 VA max.
440 VAC, 50/60 Hz with stepdown transformer RU-1803
(12 VDC for FR-1505/1510 MARK-3 only)

440 VAC

250V-MPYCY-5
CO-SPEVV-SB-C

Gyro
Converter

Gyro
Compass

250V-DPYCY-1.25

SDME

CO-SPEVV-SB-C

EPFS

2C 1.5 m

* 24 rpm, 12/24/32 VDC or 115/230 VAC
(for FR-1505/1510 MARK-3)
24 rpm, 24/32 VDC or 115/230 VAC
(for FR-1525 MARK-3)
* 42 rpm, 24/32 VDC or 115/230 VAC
(for FR-1505/1510/1525 MARK-3)

External Buzzer
Optional Supply

* Specify when ordering

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FURUNO U.S.A., INC.

FURUNO DANMARK AS

Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400

Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01

FURUNO (UK) LIMITED

FURUNO NORGE A/S

Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101

Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021

FURUNO FRANCE S.A.

FURUNO SVERIGE AB

Bordeaux-Mérignac, France
Phone: +33 05 56 13 48 00 Telefax: +33 05 56 13 48 01

Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093

FURUNO ESPAÑA S.A.

FURUNO SUOMI OY

Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97

Helsinki, Finland
Phone: +358 9 317277 Telefax: +358 9 3412930

9910XXN Printed in Japan



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 1999:10:07 11:25:52
Producer                        : Acrobat Distiller 3.0b1JÅiPower Macintosh î Åj
Modify Date                     : 2001:05:24 08:54:36-07:00
Page Count                      : 4
Has XFA                         : No
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools