Furuno Frs 1000A Users Manual

FRS-1000B to the manual a6bac9d8-5523-4247-909e-be9d76732495

2015-02-02

: Furuno Furuno-Frs-1000A-Users-Manual-429015 furuno-frs-1000a-users-manual-429015 furuno pdf

Open the PDF directly: View PDF PDF.
Page Count: 8

Integrated navigation package
RADAR/PLOTTER/SOUNDER
Models FRS-1000A/1000B/1000C
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Telephone: +81 (0)798 65-2111
Telefax: +81 (0)798 65-4200, 66-4622, 66-4623
TRADE MARK REGISTERED
MARCA REGISTRADA
Catalogue No. L-156c
Photo shows typical Radar/Plotter/Echo Sounder display.
Softkeys:
Used to select menu options
and enter numeric data.
MENU keys:
To utilize radar, plotter and
echo sounder control menus
Infrared sensor
for remote controller
Emergency
man-over-
board key
MODE keys:
Turn radar,
plotter and echo
sounder on and off.
Announcing the World's First Four-in-One,
Integrated Navigation Package.
The FRS-1000 series offers on clear color LCD:
●High definition X-Band Radar picture
●Accurate GPS/DGPS positioning
●Video Plotting with or without radar overlay
●600 W/1 kW dual frequency Echo Sounder
Remote Controller
(Standard supply)
FRS-1000A:With 4 kW, 36 nm radar
FRS-1000B:With 4 kW, 48 nm radar
FRS-1000C:With 6 kW, 64 nm radar
Innovative Integration of
Radar, GPS/Plotter
and Echo Sounder
with no-compromise. Highly advanced
performance and easy operation
■All-in-One complete navigation system
comprising:
- Radar
- GPS Receiver (DGPS optional)
- Video Plotter
- Echo Sounder
■Vividly clear pictures on the 10.4" TFT
color LCD
■Works with the latest FURUNO
MiniCharts or NAVIONICS Nav-Charts
(PCMCIA type also acceptable)
■Radar picture overlay on a Furuno digital
chart
■Head-up*, Course-up*, North-up and True
Motion* modes for both radar and video
plotter (* with FURUNO chart only)
■Automatic radar plotting option ARP-10
available to enhance the radar plotting
function
■50/200 kHz echo sounder transducer,
600 W or 1 kW output power
■Optional built-in DGPS beacon receiver
■Optional 48 rpm radar antenna for
high-speed boats (FRS-1000B/1000C only)
■Simple operation with an easy-to-
understand menu structure plus
Omni-pad and softkeys
■Space-saving, waterproof display
suitable for protected and open bridge
installation
■Up to two full function remote displays
can be added as options
Innovative Integration of
Radar, GPS/Plotter
and Echo Sounder
with no-compromise. Highly advanced
performance and easy operation
4 ft radar antenna for the 64 nm FRS-1000C
3.5 ft radar antenna for the 48 nm FRS-1000B
2 ft radome antenna for the 36 nm FRS-1000A
Compact high-sensitivity
GPS antenna
DGPS antenna (E-field)
(Whip antenna optional)
DGPS antenna (H-field)
Full-featured, All-in-One Navigation Package
Plotter display in north-up mode Plotter/Sounder display
Plotter display with control menu
The GPS receiver allows high accuracy position fixes.
There is the choice of four presentation modes:
North-up, Head-up, Course-up and True Motion.
Chart data loaded from a FURUNO or NAVIONICS
chart card (optional) presents coastlines with place
names, depth contours, buoys, lighthouses and other
navigational marks.
The plotter control menu is called up by pressing the
[PLTR] Menu/Esc key. This menu permits you to zoom in
and out the plotter display, select display modes, enter
waypoints, and so forth by combined use of the softkeys
and Omni-pad.
Marks can be entered in different shapes, line types and
colors to record your own secret points.
When you have specified a destination or the next
waypoint, you may set a cross-track-error (XTE) alarm
zone. This will make it easier to keep your vessel on the
correct course.
The plotter display can be either overlaid with the radar
image or combined with the echo sounder picture.
Plotter control menu
Nav data display
Planned
route Lighthouse
Cursor position
Range/bearing
to cursor
Waypoint data
Cursor
Own ship
Course
bar
Depth
contour
A revolutionary new all-in-one navigation package
is now available from FURUNO. The world's first
Radar/Plotter/Sounder Models FRS-1000A/1000B/
1000C provide an ultimate solution to needs of a
wide range of boaters.
This intelligent system permits you to present a
radar display, GPS chart plotter and dual-frequency
echo sounder pictures independently or in
combination on a highly visible 10.4-inch TFT color
LCD screen.
The individual system elements are ingeniously
integrated without sacrificing the ease of operation.
The straightforward menu structure combined with
the OMNI-pad and softkeys ensures remarkably
simple operation of the radar, GPS plotter and
echo sounder.
One or two remote displays can be optionally
added. The main display unit and the individual
remote displays can be operated independently of
each other. Thus, the remote display on the upper
deck may be set to echo sounder mode while the
main display in the navigation bridge is used as the
radar/GPS plotter, for example.
Optional supplies include the Auto Plotter ARP-10,
DGPS beacon receiver kit with GPS/DGPS
antenna, speed/temperature sensors, as well as
FURUNO or NAVIONICS chart cards.
GPS Receiver/ Plotter
GPS Receiver/ Plotter
Radar display with control menu
Four presentation modes are available:
Head-up, Course-up, North-up and True Motion
modes. In the True Motion mode, own ship and
targets move according to their actual speed and
heading while fixed targets including land echoes
remain stationary. The user can easily understand
the overall situation.
Standard features include two VRMs and two
EBLs, off-centering to cursor position, echo trails,
echo stretch and guard zone alarm.
Radar control menu
Nav data display
Heading mark
Cursor position
Range/bearing
to cursor(+)
Waypoint data
Cursor
VRM 1
EBL 1
EBL 2
The radar control menu is displayed by pressing the
[RDR] Menu/Esc key. This menu permits you to switch
the radar between transmit and standby conditions,
select range scales, adjust gain/clutter suppression,
and control EBLs/VRMs by using the softkeys and
Omni-pad.
The guard zone alarm permits you to set a fan- or
ring-shaped guard zone at a desired position with a
choice of inward or outward target alerting.
A 48 rpm antenna is optionally available for the
FRS-1000B or FRS-1000C to ensure uninterrupted
picture updating for high-speed vessels.
Auto Plotter ARP-10 (option)
Auto Plotter ARP-10 (option)
The Auto Plotter ARP-10 option is added to the processor unit.
It permits automatic or manual acquisition of up to 10 targets,
tracks them at specified plot intervals, presents alphanumeric
target data, and triggers a collision alarm for targets violating
preset CPA/TCPA limits.
Target acquisition : Automatic or manual acquisition of up to 10
targets in 0.2-16 nm
Tracking range : 0.1-16 nm
Vector mode : True or relative vector
Vector length : 30 sec, 1, 2, 3, 4, 5, 6 or 12 min.
Target plot interval : 15 or 30 sec, 1, 2, 3 or 6 min.
Audio-visual alarm : Produced against lost targets and targets on
collision course
Target data display
: Range, bearing, course, speed and
CPA/TCPA of a chosen target
ARP-10 can not be used with 48 rpm antenna speed option
Heading data in AD-10 format required
Tracked
target
Target
data
Radar
Radar
Radar/Plotter/Sounder display
Radar display in north-up mode
Radar/Sounder display
VRM 2
VRM 2
VRM 1
EBL 2
EBL 1
Sounder display in dual-frequency mode
The high-performance 50/200 kHz echo sounder
meets the need of recreational and professional
fishermen.
It presents echoes in Normal (single or dual
frequency), Bottom zoom, Bottom lock or Marker
zoom display mode.
The automatic bottom-tracking function, which can
be activated in the Normal display mode, tracks the
seabed of varying depths by automatically phasing
the sounding range and setting optimum receiver
gain. This relieves you of the need for frequent
adjustment when you are busy maneuvering the
ship or fishing.
The dual-frequency sounding shown above facilitates
discrimination of bottom features and detection of
individual fish or fish schools.
To call up the sounder control menu, just press the
[SNDR] Menu/Esc key. You can then select a desired
sounding range, adjust the receiver gain, phase the
sounding range, move the variable depth marker, and
so forth on this menu by simply using the softkeys and
Omni-pad.
Alarms can be set to alert you to dangerous water
depths and fish echoes. A water temperature alarm is
also available if an appropriate sensor is connected to
the system.
If you press the [SNDR] Mode key to present the echo
sounder picture when the radar or plotter picture is
already displayed, the echo sounder picture will be
displayed at the right of the screen as shown on the
preceding pages.
Sounder control menu
Depth
Water
temperature
Nav data display
Echo Sounder
Echo Sounder
Sounder display with control menu
Bottom-lock expansion Marker zoom
SYSTEM CONFIGURATION
For FRS-1000B For FRS-1000C
RSB-0071-057
RADAR ANTENNA
GPS/DGPS ANTENNA
For FRS-1000A
10.5 to 40.0 VDC
GPA-016
TRANSDUCER
Optional
115/230 VAC
1∅, 50/60 Hz
PROCESSOR UNIT
RSM-001
DGPS
BEACON
RECEIVER
BOARD *3
AUTO
PLOTTER
ARP-10 *2
GYRO
CONVERTER
AD-100
HEADING
SENSOR
PG-1000
RECTIFIER
RU-1746B-2
SPEED/TEMP.
SENSOR
REMOTE
DISPLAY UNIT
RSD-002 *1
REMOTE
DISPLAY UNIT
RSD-002 *1
MATCHING
BOX
MB-1000
XN8-RSB-0082-064 (24 rpm)
XN8-RSB-0083-064 (48 rpm)XN12A-RSB0070-059 (24 rpm)
XN12A-RSB0073-059 (48 rpm)
50/200 kHz
1 kW
DISPLAY UNIT
RSD-001
10.5 to 40.0 VDC
50/200 kHz
600 W
(Specify when ordering)
10.5 to 40.0 VDC
15 m
Standard
*2: 48 rpm antenna cannot
be used and heading data in AD-10 or NMEA0183
format required
*1: Up to two remote display units
may be connected.
*3: DGPS requires built-in beacon
receiver board
Optional
Whip antenna
Cable length
30 m max from
Processor unit
to the last
remote display.
GPA-018S
*3(For DGPS)GPA-019S
*3(For DGPS)
GENERAL
Display Unit 10.4-inch color LCD, 640 (H) x 480 (V) dots
Display Modes (1) Radar (2) Plotter (3) Echo sounder
(4) Radar/Plotter(5) Radar/Echo sounder
(6) Plotter/Echo sounder
(7) Radar/Plotter/Echo sounder
POWER SUPPLY 10.5 to 40.0 VDC, 100 W max
RADAR
1. Antenna Type Output Power/Max Range
FRS-1000A: 60 cm radome (24 rpm)/4 kW/36 nm
FRS-1000B: 3.5 ft open (24 rpm/48 rpm*)/4 kW/48 nm
FRS-1000C: 4 ft open (24 rpm/48 rpm*)/6 kW/64 nm
*Specify when ordering
2. Presentation Modes
Head-up, Course-up*, North-up*, True motion**
*Heading data required **Heading and speed data required
3. Principal Functions
Auto tuning/anti-clutter, Echo Trails, Echo Stretch, two EBLs/VRMs,
Picture Zoom (2x), Guard Zone Alarm
GPS PLOTTER
1. Receiver Type Eight discrete channels, C/A code, all-in-view
2. Accuracy 10 m, 95% of the time, HDOP≤4
(
less than 5 m with optional DGPS, 95% of the time
)
3. Map Scale 0.15 to 2560 nm
4. Capacity Plotter
2800 points for ship's track, 3800 marks, 200 waypoints (incl. starting
point and externally entered waypoint), 20 planned routes (Max 30
waypoints/route)
5. Presentation Modes
Head-up*, Course-up*, North-up, True motion* *With FURUNO chart only
6. External Memory
Card slot for optional FURUNO and NAVIONICS chart ROM cards
and RAM cards for storage of track points and marks
7. Other Functions MOB, Arrival/anchor watch, XTE alarm
ECHO SOUNDER
1. Operating Frequency Dual-frequency 50 and 200 kHz
2. Output Power 600 W or 1 kW rms
(Optional matching box required for 1 kW output)
3. Display Modes Normal, Bottom zoom, Bottom lock,
Marker zoom display
4. Display Colors 8 colors
5. Basic Ranges 8 basic ranges customized to max 1200 m
(4000 ft, 650 fa)
6. Range Phasing Up to 2400 m (8000 ft, 1300 fa)
7. Principal Functions
Automatic bottom tracking, Variable picture advance, Variable depth
marker, Alarms for preset water depth, fish echoes, ship speed* and
water temperature* (Appropriate sensors required.)
EQUIPMENT LIST
Standard
1. Display unit RSD-001 1 unit
2. Processor unit RSM-001 1 unit
3. Radar antenna (Specify when ordering) 1 unit
FRS-1000A (60 cm radome/24 rpm/4 kW/36 nm)
FRS-1000B (3.5 ft open/24 or 48 rpm/4 kW/48 nm)
FRS-1000C (4 ft open/24/ or 48 rpm/6 kW/64 nm)
Antenna cable: selectable from 10/15/20/30 m
4. Remote Controller RMC-010 1 unit
5. GPS GPA-016 antenna with 15 m cable 1 unit
6. Video/Data cables 5 m each 1 unit
7. Installation materials and spare parts 1 set
Optional
1. Internal DGPS beacon receiver kit
2. Remote display unit (2 units max)
3. Extension cables for Video/Data
(specify cable length from 5/10/15/20/30 m)
4. Auto plotter ARP-10 (24 rpm antenna only)
5. Chart ROM card
(FURUNO PCMCIA/MiniChart or NAVIONICS PCMCIA/Nav-ChartTM)
6. RAM card (256, 512 kB or 1 MB)
7. Speed/temperature sensor ST-01MSB
8. Temperature sensor T-02MTB, T-02MSB, T-03MSB
9. Transducer matching box MB-1000
10. Gyro converter AD-100
11. 30 m extension cable for GPS antenna
12. 10 m extension cable for E/S transducer
13. GPS antenna base
13-QA330 (Pipe mount), 13-QA310 (Offset bracket),
13-RC5160 (Handrail mount)
14. NMEA cable 10 m FM-C6SPF001-100 (10 m)
15. Rectifier RU-1746B-2
16. Rectifier PR-62 for remote display unit RSD-002
17. DGPS antenna for GPA-018S or GPA-019S
E/S Transducers (specify when ordering)
600W
50/200 kHz: 520-5PSD (plastic, thru-hull), 520-5MSD (bronze, thru-hull),
520-5PWD (plastic, transom),
520ST-PWD (plastic, transom with speed/temp sensor),
524ST-MSD (bronze, thru-hull with speed/temp sensor)
1 kW (Optional matching box required)
50/200 kHz: 50/200-1T
50 kHz: 50B-6, 50B-6G
200 kHz: 200B-5, 200B-5S
0005XVKS Printed in Japan
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Antenna Unit
Display Unit
∅602
348 13.7’’
266 105’’
278 10.9’’
Bow
(160 6.3’’)
∅640
(160 6.3’’) 4-M10
Fixing Holes
Cable Entry
445 17.5"
357 14.1"
542 21.3"
340 13.4"
250 9.8"
250 9,8"
213 8.4"
438 17.2"
1255 49.4"
4- 15
Fixing Holes
Bow
(200 7.9’’)
(200 7.9’’)
Cable Entry
25
20.3 0.8"
57.4 2.3"
67.4 2.7"
∅62 2.4"
● Radar antenna for FRS-1000C
● Radar antenna for FRS-1000B
● Radar antenna for FRS-1000A
● GPS antenna
GPA-016
4.1 kg 9.0 lb
5-∅7
30°
(MAX286 11.3")
15 0.6''
85 3.4''
94 3.7''
(55 2.2'')
27.5
1.1''
27.5
1.1''
29
1.1''
331 13.0''
307 12.1''
127 5.0'' 127 5.0''
277 10.9''
265 10.4''
175 6.9"
(190 7.5")
(39 1.5")
(203 8.0")
219 8.6"
4-∅6
CHART CARD
280 11.0"
9
0.4"
Processor Unit 6 kg 13.2 lb
SPECIFICATIONS OF FRS-1000A/1000B/1000C
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITED
Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
FURUNO ESPANA S.A.
Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK AS
Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/S
Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE AB
Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO SUOMI OY
Helsinki, Finland
Phone: +358 9 317277 Telefax: +358 9 3412930
0.1 kg 0.2 lb
8.0 kg 17.6 lb
22 kg 44.1 lb 23 kg 50.7 lb
● DGPS antenna
GPA-018S
0.3 kg 0.7 lb
116 4.6"
156 6.1"
● DGPS antenna
GPA-019S
1.0 kg 2.2 lb
1040 41.0"
441 17.4"
355 14.0"
542 21.3"
340 13.4"
250 9.8"
250 9.8"
213 8.4"
438 17.2"
Fixing Holes
Bow
(200 7.9’’)
(200 7.9’’)
Cable Entry
25 4- 15

Navigation menu